submitted / available | |||||||
---|---|---|---|---|---|---|---|
|
Acer Regulatory Information and Safety Guide NC.20411.0VO v2 | Users Manual | 1.16 MiB | June 01 2022 / November 29 2022 | delayed release | ||
|
Regulatory Info & Safety Guide | Users Manual | 1.01 MiB | March 23 2023 / September 25 2023 | delayed release | ||
|
Regulatory Information | Users Manual | 1.18 MiB | March 10 2023 / September 12 2023 | delayed release | ||
|
SP514-51N Datejust ADP QG | Users Manual | 1.51 MiB | March 30 2022 / September 27 2022 | delayed release | ||
|
SP514-51N Datejust ADP UM | Users Manual | 3.66 MiB | March 30 2022 / September 27 2022 | delayed release | ||
|
User Manual | Users Manual | 1.23 MiB | March 23 2023 / September 25 2023 | delayed release | ||
|
User Manual v1 | Users Manual | 3.61 MiB | March 10 2023 / September 12 2023 | delayed release | ||
|
User Manual v2 | Users Manual | 1.52 MiB | March 10 2023 / September 12 2023 | delayed release | ||
|
User manual-SG prPT516-52s PANAM | Users Manual | 323.52 KiB | April 01 2022 / September 29 2022 | delayed release | ||
|
User manual-sfx16-52G Penguin ADP QG 12142021 EN | Users Manual | 1.33 MiB | April 01 2022 / September 29 2022 | delayed release | ||
|
Users Manual | Users Manual | 3.61 MiB | November 23 2022 / May 23 2023 | delayed release | ||
|
Users Manual CCM14-51 | Users Manual | 1.53 MiB | April 13 2022 / October 10 2022 | delayed release | ||
|
Users Manual FCC DoC | Users Manual | 58.22 KiB | April 13 2022 / October 10 2022 | delayed release | ||
|
Internal Photos | Internal Photos | 1.70 MiB | March 23 2023 / September 25 2023 | delayed release | ||
|
Internal Photos-1 | Internal Photos | 4.45 MiB | March 30 2022 / September 27 2022 | delayed release | ||
|
Internal Photos-2 | Internal Photos | 4.77 MiB | March 30 2022 / September 27 2022 | delayed release | ||
|
Internal Photos-3 | Internal Photos | 5.18 MiB | March 30 2022 / September 27 2022 | delayed release | ||
|
Internal Photos-4 | Internal Photos | 4.84 MiB | March 30 2022 / September 27 2022 | delayed release | ||
|
Internal Photos-5 | Internal Photos | 1.84 MiB | March 30 2022 / September 27 2022 | delayed release | ||
|
Internal Photos Part 1 | Internal Photos | 4.81 MiB | April 08 2022 / October 06 2022 | delayed release | ||
|
Internal Photos Part 2 | Internal Photos | 3.91 MiB | April 08 2022 / October 06 2022 | delayed release | ||
|
External Photos | External Photos | 913.24 KiB | March 23 2023 / September 25 2023 | delayed release | ||
|
External Photos-1 | External Photos | 4.44 MiB | March 30 2022 / September 27 2022 | delayed release | ||
|
External Photos-2 | External Photos | 3.09 MiB | March 30 2022 / September 27 2022 | delayed release | ||
|
TempConfidential AX211NGW - Expho | External Photos | 998.73 KiB | March 03 2022 / August 31 2022 | delayed release | ||
|
ID Label/Location Info | ID Label/Location Info | 58.46 KiB | April 18 2024 | |||
ID Label/Location Info | March 23 2023 / March 29 2023 | ||||||
|
Label Location | ID Label/Location Info | 112.49 KiB | December 20 2023 / December 29 2023 | |||
|
Label Sample | ID Label/Location Info | 1.25 MiB | December 20 2023 / December 29 2023 | |||
|
ACER Attestation Statements US agent for service of process | Attestation Statements | 134.42 KiB | April 18 2024 | |||
|
Antenna Specification | Test Report | 690.46 KiB | April 18 2024 | |||
|
Attestation Statements part 2.911 d 5 i and 2.911 d 5 ii | Attestation Statements | 144.74 KiB | April 18 2024 | |||
|
FCC Class II permissive change letter | Cover Letter(s) | 112.36 KiB | April 18 2024 | |||
|
FCC agent auth letter | Cover Letter(s) | 70.59 KiB | April 18 2024 | |||
|
LoA ACER AX211NGW FCC UNII4 Rpts | Cover Letter(s) | 76.92 KiB | April 18 2024 | |||
|
TR 210209-01.TR09 | Test Report | 4.37 MiB | April 18 2024 | |||
|
TR 210209-01.TR09-2 | Test Report | 4.29 MiB | April 18 2024 | |||
|
TR 210209-01.TR10 | RF Exposure Info | 973.17 KiB | April 18 2024 | |||
|
TR 210209-01.TR10 Annex E | RF Exposure Info | 1.62 MiB | April 18 2024 | |||
Test Setup Photos RF | Test Setup Photos | April 18 2024 / October 16 2024 | delayed release | ||||
|
Test Setup Photos SAR | Test Setup Photos | 731.33 KiB | November 23 2022 / May 23 2023 | delayed release | ||
|
UNII-4 Declaration | Cover Letter(s) | 87.99 KiB | April 18 2024 | |||
|
UNII-4 PAG check list | Cover Letter(s) | 118.59 KiB | April 18 2024 | |||
|
confidentiality | Cover Letter(s) | 175.43 KiB | April 18 2024 | |||
|
Attestation Statements Part 2.911(d)(7) | Attestation Statements | 154.67 KiB | December 20 2023 / December 29 2023 | |||
|
Attstn Stmt part 2.911(d)(5)(i) | Attestation Statements | 532.54 KiB | December 20 2023 / December 29 2023 | |||
|
Attstn Stmt part 2.911(d)(5)(ii) | Attestation Statements | 726.27 KiB | December 20 2023 / December 29 2023 | |||
Block Diagram | Block Diagram | December 20 2023 | confidential | ||||
|
C2PC Letter | Cover Letter(s) | 130.95 KiB | December 20 2023 / December 29 2023 | |||
|
Confidentiality Letter | Cover Letter(s) | 700.81 KiB | December 20 2023 / December 29 2023 | |||
|
Declaration of Authorization | Cover Letter(s) | 650.63 KiB | December 20 2023 / December 29 2023 | |||
Internal Photos Part 1 | Internal Photos | December 20 2023 / June 26 2024 | delayed release | ||||
Internal Photos Part 2 | Internal Photos | December 20 2023 / June 26 2024 | delayed release | ||||
|
LOA Letter | Cover Letter(s) | 30.77 KiB | December 20 2023 / December 29 2023 | |||
Operational Description | Operational Description | December 20 2023 | confidential | ||||
|
SAR Report | RF Exposure Info | 1.34 MiB | December 20 2023 / December 29 2023 | |||
|
SAR Report App A | RF Exposure Info | 410.64 KiB | December 20 2023 / December 29 2023 | |||
|
SAR Report App B | RF Exposure Info | 731.20 KiB | December 20 2023 / December 29 2023 | |||
|
SAR Report App D | RF Exposure Info | 2.35 MiB | December 20 2023 / December 29 2023 | |||
|
SAR Report App E | RF Exposure Info | 5.34 MiB | December 20 2023 / December 29 2023 | |||
Schematics | Schematics | December 20 2023 | confidential | ||||
TSUP Antenna Datasheet | Test Setup Photos | December 20 2023 / June 26 2024 | delayed release | ||||
TSUP SAR | Test Setup Photos | December 20 2023 / June 26 2024 | delayed release | ||||
|
Test Report Antenna Datasheet | Test Report | 1.28 MiB | December 20 2023 / December 29 2023 | |||
TSUP | Test Setup Photos | December 20 2023 / June 26 2024 | delayed release | ||||
Cover Letter(s) | March 23 2023 / March 29 2023 | ||||||
Test Report | March 23 2023 / March 29 2023 | ||||||
Test Report | March 23 2023 / March 29 2023 | ||||||
Attestation Statements | March 23 2023 / March 29 2023 | ||||||
Attestation Statements | March 23 2023 / March 29 2023 | ||||||
Cover Letter(s) | March 23 2023 / March 29 2023 | ||||||
Cover Letter(s) | March 23 2023 / March 29 2023 | ||||||
|
SAR Appendix A Photos | Test Setup Photos | 873.21 KiB | March 23 2023 / September 25 2023 | delayed release | ||
RF Exposure Info | March 24 2023 / March 29 2023 | ||||||
Test Report | March 10 2023 / March 16 2023 | ||||||
Test Report | March 10 2023 / March 16 2023 | ||||||
Cover Letter(s) | March 10 2023 / March 16 2023 | ||||||
Test Report | March 10 2023 / March 16 2023 | ||||||
Cover Letter(s) | March 10 2023 / March 16 2023 | ||||||
Cover Letter(s) | March 10 2023 / March 16 2023 | ||||||
Test Report | November 23 2022 / December 06 2022 | ||||||
RF Exposure Info | November 23 2022 / December 06 2022 | ||||||
RF Exposure Info | November 23 2022 / December 06 2022 | ||||||
Cover Letter(s) | November 29 2022 / December 06 2022 | ||||||
Cover Letter(s) | November 23 2022 / December 06 2022 | ||||||
RF Exposure Info | November 23 2022 / December 06 2022 | ||||||
Block Diagram | November 25 2022 / December 06 2022 | ||||||
Test Report | June 01 2022 / June 10 2022 | ||||||
Test Report | June 09 2022 / June 10 2022 | ||||||
Attachment for PAG TXSENS | Operational Description | June 09 2022 | confidential | ||||
Cover Letter(s) | June 01 2022 / June 10 2022 | ||||||
Cover Letter(s) | June 01 2022 / June 10 2022 | ||||||
RF Exposure Info | June 01 2022 / June 10 2022 | ||||||
RF Exposure Info | June 01 2022 / June 10 2022 | ||||||
RF Exposure Info | June 01 2022 / June 10 2022 | ||||||
Antenna report | Operational Description | April 13 2022 | confidential | ||||
RF Exposure Info | April 13 2022 / May 03 2022 | ||||||
Antenna Specification | Operational Description | April 08 2022 | confidential | ||||
Antenna Spec | Operational Description | April 01 2022 | confidential | ||||
|
Test Setup Photos | Test Setup Photos | 1.07 MiB | March 30 2022 / September 27 2022 | delayed release | ||
Cover Letter(s) | March 09 2022 / March 15 2022 |
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2024-04-18 | 5855 ~ 5855 | NII - Unlicensed National Information Infrastructure TX | Class II Permissive Change |
2 | 2023-12-29 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
3 | 6025 ~ 6985 | 6XD - 15E 6 GHz Low Power Indoor Client | ||
4 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
5 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
6 | 2023-03-29 | 2422 ~ 2462 | DTS - Digital Transmission System | Class II permissive change or modification of presently authorized equipment |
7 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
8 | 6025 ~ 6985 | 6XD - 15E 6 GHz Low Power Indoor Client | ||
9 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
10 | 2023-03-16 | 6025 ~ 6985 | 6XD - 15E 6 GHz Low Power Indoor Client | |
11 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
12 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
13 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
14 | 2022-12-06 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Class II Permissive Change |
15 | 6025 ~ 6985 | 6XD - 15E 6 GHz Low Power Indoor Client | ||
16 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
17 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
18 | 2022-06-10 | 2422 ~ 2462 | DTS - Digital Transmission System | |
19 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
20 | 6025 ~ 6985 | 6XD - 15E 6 GHz Low Power Indoor Client | ||
21 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
22 | 2022-05-03 | 2422 ~ 2462 | DTS - Digital Transmission System | |
23 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
24 | 6025 ~ 6985 | 6XD - 15E 6 GHz Low Power Indoor Client | ||
25 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
26 | 2022-04-11 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
27 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
28 | 6025 ~ 6985 | 6XD - 15E 6 GHz Low Power Indoor Client | ||
29 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
30 | 2022-04-08 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
31 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
32 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
33 | 6025 ~ 6985 | 6XD - 15E 6 GHz Low Power Indoor Client | ||
34 | 2022-04-01 | 2422 ~ 2462 | DTS - Digital Transmission System | Class II permissive change or modification of presently authorized equipment |
35 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
36 | 6025 ~ 6985 | 6XD - 15E 6 GHz Low Power Indoor Client | ||
37 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
38 | 2022-03-15 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | Class II Permissive Change |
39 | 6025 ~ 6985 | 6XD - 15E 6 GHz Low Power Indoor Client | ||
40 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
41 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
42 | 2022-03-04 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | Class II permissive change or modification of presently authorized equipment |
43 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
44 | 6025 ~ 6985 | 6XD - 15E 6 GHz Low Power Indoor Client | ||
45 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
46 | 2022-03-03 | 2422 ~ 2462 | DTS - Digital Transmission System | |
47 | 6025 ~ 6985 | 6XD - 15E 6 GHz Low Power Indoor Client | ||
48 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
49 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
50 | 2022-03-01 | 2422 ~ 2462 | DTS - Digital Transmission System | Class II Permissive Change |
51 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
52 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
53 | 6025 ~ 6985 | 6XD - 15E 6 GHz Low Power Indoor Client | ||
54 | 2022-02-25 | 6025 ~ 6985 | 6XD - 15E 6 GHz Low Power Indoor Client | |
55 | 2022-02-22 | 2422 ~ 2462 | DTS - Digital Transmission System | |
56 | 6025 ~ 6985 | 6XD - 15E 6 GHz Low Power Indoor Client | ||
57 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
58 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
59 | 2022-02-10 | 6025 ~ 6985 | 6XD - 15E 6 GHz Low Power Indoor Client | |
60 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
61 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
62 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
63 | 2022-01-27 | 6025 ~ 6985 | 6XD - 15E 6 GHz Low Power Indoor Client | |
64 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
65 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
66 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
67 | 2021-12-30 | 2422 ~ 2462 | DTS - Digital Transmission System | Change in Identification |
68 | 6025 ~ 6985 | 6XD - 15E 6 GHz Low Power Indoor Client | ||
69 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
70 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter |
Applicant Information | ||||||
---|---|---|---|---|---|---|
Effective |
2024-04-18
|
|||||
2023-12-29
|
||||||
2023-03-29
|
||||||
2023-03-16
|
||||||
2022-12-06
|
||||||
2022-06-10
|
||||||
2022-05-03
|
||||||
2022-04-11
|
||||||
2022-04-08
|
||||||
2022-04-01
|
||||||
2022-03-15
|
||||||
2022-03-04
|
||||||
2022-03-03
|
||||||
2022-03-01
|
||||||
2022-02-25
|
||||||
2022-02-22
|
||||||
2022-02-10
|
||||||
2022-01-27
|
||||||
2021-12-30
|
||||||
Applicant's complete, legal business name |
Acer Incorporated
|
|||||
FCC Registration Number (FRN) |
0013355508
|
|||||
0026427773
|
||||||
Physical Address |
8F, 88, Sec. 1, Xintai 5th Rd. Xizhi
|
|||||
9F, 88, Sec. 1, Xintai 5th Rd.
|
||||||
New Taipei City, N/A
|
||||||
New Taipei City, N/A 221
|
||||||
Taiwan
|
||||||
TCB Information | ||||||
TCB Application Email Address |
c******@telefication.com
|
|||||
t******@timcoengr.com
|
||||||
h******@acbcert.com
|
||||||
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
FCC ID | ||||||
Grantee Code |
HLZ
|
|||||
Equipment Product Code |
AX211NG
|
|||||
Person at the applicant's address to receive grant or for contact | ||||||
Name |
R******** J****
|
|||||
H**** S****** L********
|
||||||
Title |
Sr. Manager
|
|||||
Manager
|
||||||
Telephone Number |
886-2******** Extension:
|
|||||
886-2******** Extension:
|
||||||
Fax Number |
886-2********
|
|||||
r******@acer.com
|
||||||
H******@acer.com
|
||||||
Technical Contact | ||||||
Firm Name |
SGS Taiwan Ltd
|
|||||
SGS Taiwan Ltd.
|
||||||
DEKRA Testing and Certification Co., Ltd
|
||||||
Name |
J**** C********
|
|||||
Y****** L****
|
||||||
F****** Y******
|
||||||
Physical Address |
134, Wu Kung Road, WuKu Industrial Zone
|
|||||
No. 26, Huaya 1stRd., Guishan Dist.
|
||||||
No.5-22, Ruishukeng, Linkou Dist.
|
||||||
134, Wu Kung Road
|
||||||
Taoyuan
|
||||||
New Taipei City
|
||||||
New Taipei City, 248
|
||||||
Taiwan
|
||||||
Telephone Number |
+8862********
|
|||||
886 2********
|
||||||
886-3********
|
||||||
886-2********
|
||||||
88622******** Extension:
|
||||||
+8862******** Extension:
|
||||||
Fax Number |
886 2********
|
|||||
88622********
|
||||||
886-3********
|
||||||
886-2********
|
||||||
j******@sgs.com
|
||||||
y******@dekra.com
|
||||||
f******@dekra.com
|
||||||
Non Technical Contact | ||||||
Firm Name |
SGS Taiwan Ltd
|
|||||
SGS Taiwan Ltd.
|
||||||
Name |
J**** C******
|
|||||
Physical Address |
134, Wu Kung Road, WuKu Industrial Zone
|
|||||
134, Wu Kung Road
|
||||||
New Taipei City, 248
|
||||||
Taiwan
|
||||||
Telephone Number |
+8862********
|
|||||
886 2********
|
||||||
88622******** Extension:
|
||||||
+8862******** Extension:
|
||||||
Fax Number |
886 2********
|
|||||
88622********
|
||||||
j******@sgs.com
|
||||||
Confidentiality (long or short term) | ||||||
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | |||||
No | ||||||
Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | |||||
No | ||||||
If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 10/16/2024 | |||||
06/26/2024 | ||||||
09/25/2023 | ||||||
09/12/2023 | ||||||
05/23/2023 | ||||||
11/29/2022 | ||||||
10/10/2022 | ||||||
10/06/2022 | ||||||
09/29/2022 | ||||||
09/27/2022 | ||||||
09/05/2022 | ||||||
08/31/2022 | ||||||
08/30/2022 | ||||||
08/28/2022 | ||||||
08/16/2022 | ||||||
08/07/2022 | ||||||
07/21/2022 | ||||||
06/27/2022 | ||||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
Cognitive Radio & Software Defined Radio, Class, etc | ||||||
Is this application for software defined/cognitive radio authorization? | No | |||||
Equipment Class | NII - Unlicensed National Information Infrastructure TX | |||||
DSS - Part 15 Spread Spectrum Transmitter | ||||||
6XD - 15E 6 GHz Low Power Indoor Client | ||||||
DTS - Digital Transmission System | ||||||
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Intel Wi-Fi 6E AX211 | |||||
Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | |||||
Yes | ||||||
Modular Equipment Type | Single Modular Approval | |||||
Does not apply | ||||||
Purpose / Application is for | Class II Permissive Change | |||||
Class II permissive change or modification of presently authorized equipment | ||||||
Change in Identification | ||||||
Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | |||||
No | ||||||
Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | |||||
Grant Comments | Class II Permissive Change : Software is modified to enable U-NII-4 band and add the channels that span U-NII-3 and U-NII-4 Bands. SAR has been evaluated at 14 mm. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.48 W/kg and 0.92 W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | |||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change: Authorizes portable use when integrated into the acer Model N24H3 Notebook computer. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.14 W/kg and 1.14 W/kg, respectively. | ||||||
Power Output listed is EIRP. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. Class II Permissive Change: Authorizes portable use when integrated into the acer Model N24H3 Notebook computer. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.00 W/kg and 1.02 W/kg, respectively. The highest reported power density is 5.82 mW/cm2. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change: Authorizes portable use when integrated into the acer Model N24H3 Notebook computer. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.01 W/kg and 1.14 W/kg, respectively. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client-only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change: Authorizes portable use when integrated into the acer Model N24H3 Notebook computer. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.13 W/kg and 1.13 W/kg, respectively. | ||||||
Class II Permissive Change: This change is to incorporate this module into a notebook computer (Brand/Model number: Acer/ N22Q24) as described in this filing. The Power Density and SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.52 W/kg and 0.85 W/kg, respectively. Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client-only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. | ||||||
Class II Permissive Change: This change is to incorporate this module into a notebook computer (Brand/Model number: Acer/ N22Q24) as described in this filing. The Power Density and SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.08 W/kg and 1.23 W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20 MHz, 40 MHz and 80MHz bandwidth modes as described in this filing. Device is a client-only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. | ||||||
Class II Permissive Change: This change is to incorporate this module into a notebook computer (Brand/Model number: Acer/ N22Q24) as described in this filing. The Power Density and SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.46 W/kg and 1.01 W/kg, respectively. The highest reported power density is 4.51 W/m2. Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. | ||||||
Class II Permissive Change: This change is to incorporate this module into a notebook computer (Brand/Model number: Acer/ N22Q24) as described in this filing. The Power Density and SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.15 W/kg and 1.23 W/kg, respectively. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. | ||||||
Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. Class II Permissive Change: Authorizes portable use when integrated into the Acer Model N23Q11 portable computer. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.03 W/kg and 1.20 W/kg, respectively. The highest reported power density is 3.14 mW/cm2 | ||||||
Similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. Class II Permissive Change: Authorizes portable use when integrated into the Acer Model N23Q11 portable computer. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.05W/kg and 1.36 W/kg, respectively. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 0.89W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. Class II Permissive Change: Authorizes portable use when integrated into the Acer Model N23Q11 portable computer. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.00 W/kg and 1.34 W/kg, respectively. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Authorizes portable use when integrated into the Acer Model N23Q11 portable computer. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.30 W/kg and 1.36 W/kg, respectively. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N23C1) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.25 W/kg and 1.19 W/kg, respectively. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N23C1) as described in this filing. The Power Density and SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.63 W/kg and 0.88 W/kg, respectively. Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N23C1) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.03 W/kg and 1.19 W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N23C1) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.95 W/kg and 0.95 W/kg, respectively. Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 0.89W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N22Q14) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.18 W/kg and 1.58 W/kg, respectively. Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N22Q14) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.41 W/kg and 1.59 W/kg, respectively. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N22Q14) as described in this filing. The Power Density and SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.15 W/kg and 1.56 W/kg, respectively. Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N22Q14) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.19 W/kg and 1.59 W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N22Q5) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.35 W/kg and 0.69 W/kg, respectively. Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N22Q5) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.11 W/kg and 1.07 W/kg, respectively. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N22Q5) as described in this filing. The Power Density and SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.15 W/kg and 0.29 W/kg, respectively. Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N22Q5) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.89 W/kg and 1.07 W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N21C2) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.18 W/kg and 1.354 W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N21C2) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.42 W/kg and 1.521 W/kg, respectively. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N21C2) as described in this filing. The Power Density and SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.10 W/kg and 1.521 W/kg, respectively. Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N21C2) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.97 W/kg and 1.226 W/kg, respectively. Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N21C3) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.16 W/kg and 1.36 W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N21C3) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.20 W/kg and 1.36 W/kg, respectively. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N21C3) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.09 W/kg and 1.29 W/kg, respectively. Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N21C3) as described in this filing. The Power Density and SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.05 W/kg and 1.25 W/kg, respectively. Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N22Q1) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.85 W/kg and 1.515 W/kg, respectively. Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N22Q1) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.35 W/kg and 1.531 W/kg, respectively. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N22Q1) as described in this filing. The Power Density and SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.18 W/kg and 1.531W/kg, respectively. Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N22Q1) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.10 W/kg and 1.506 W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N21C2) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.14 W/kg and 1.586 W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N21C2) as described in this filing. The Power Density and SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.15 W/kg and 1.593W/kg, respectively. Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N21C2) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.44 W/kg and 1.593 W/kg, respectively. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N21C2) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.11 W/kg and 1.551 W/kg, respectively. Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the RF output power through firmware and to request approval for portable category specific host of Acer Notebook PC, model number: N21H3, with antenna WNC, part no. 57EABS15.030 and 57EABS15.031. The highest reported Body and Simultaneous SAR values are 1.13 W/kg and 1.30 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the RF output power through firmware and to request approval for portable category specific host of Acer Notebook PC, model number: N21H3, with antenna WNC, part no. 57EABS15.030 and 57EABS15.031. The highest reported Body and Simultaneous SAR values are 1.13 W/kg and 1.31 W/kg respectively. | ||||||
Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes. Class II Permissive Change with a decrease in the RF output power through firmware and to request approval for portable category specific host of Acer Notebook PC, model number: N21H3, with antenna WNC, part no. 57EABS15.030 and 57EABS15.031. The highest reported Body and Simultaneous SAR values are 0.67 W/kg and 1.23 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the RF output power through firmware and to request approval for portable category specific host of Acer Notebook PC, model number: N21H3, with antenna WNC, part no. 57EABS15.030 and 57EABS15.031. The highest reported Body and Simultaneous SAR values are 0.18 W/kg and 1.23 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the RF output power through firmware and to request approval for portable category specific host of Acer Notebook PC, model number: N21H2, with antenna WNC, part no. 57EABS15.028 and 57EABS15.029. The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.40 W/kg respectively. | ||||||
Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes. Class II Permissive Change with a decrease in the RF output power through firmware and to request approval for portable category specific host of Acer Notebook PC, model number: N21H2, with antenna WNC, part no. 57EABS15.028 and 57EABS15.029. The highest reported Body and Simultaneous SAR values are 0.48 W/kg and 1.23 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the RF output power through firmware and to request approval for portable category specific host of Acer Notebook PC, model number: N21H2, with antenna WNC, part no. 57EABS15.028 and 57EABS15.029. The highest reported Body and Simultaneous SAR values are 0.34 W/kg and 1.41 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the RF output power through firmware and to request approval for portable category specific host of Acer Notebook PC, model number: N21H2, with antenna WNC, part no. 57EABS15.028 and 57EABS15.029. The highest reported Body and Simultaneous SAR values are 1.09 W/kg and 1.41 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the RF output power through firmware and to request approval for portable category specific host of Acer Notebook PC, model number: N21H2, with antenna WNC, part no. 57EABS15.070 and 57EABS15.071. The highest reported Body and Simultaneous SAR values are 1.17 W/kg and 1.50 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the RF output power through firmware and to request approval for portable category specific host of Acer Notebook PC, model number: N21H2, with antenna WNC, part no. 57EABS15.070 and 57EABS15.071. The highest reported Body and Simultaneous SAR values are 0.33 W/kg and 1.50 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the RF output power through firmware and to request approval for portable category specific host of Acer Notebook PC, model number: N21H2, with antenna WNC, part no. 57EABS15.070 and 57EABS15.071. The highest reported Body and Simultaneous SAR values are 1.10 W/kg and 1.43 W/kg respectively. | ||||||
Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes. Class II Permissive Change with a decrease in the RF output power through firmware and to request approval for portable category specific host of Acer Notebook PC, model number: N21H2, with antenna WNC, part no. 57EABS15.070 and 57EABS15.071. The highest reported Body and Simultaneous SAR values are 0.54 W/kg and 1.33 W/kg respectively. | ||||||
Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes. Class II Permissive Change: Update the Contention Based Protocol test with the lower antenna gain as documented in the filing. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N21C3) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.03 W/kg and 1.45 W/kg, respectively. Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N21C3) as described in this filing. The Power Density and SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.74 W/kg and 1.33W/kg, respectively. Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N21C3) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.16 W/kg and 1.49 W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N21C3) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.42 W/kg and 1.49 W/kg, respectively. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N22C4) as described in this filing. The Power Density and SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.07 W/kg and 1.18W/kg, respectively. Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N22C4) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.18 W/kg and 1.18 W/kg, respectively. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N22C4) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.78 W/kg and 1.54 W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N22C4) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.94 W/kg and 0.96 W/kg, respectively. Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : Acer/ N22C3) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.71 W/kg and 1.43 W/kg, respectively. Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : Acer/ N22C3) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.91 W/kg and 1.37 W/kg, respectively. Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : Acer/ N22C3) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.02 W/kg and 1.09 W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : Acer/ N22C3) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are <0.10 W/kg and 1.43 W/kg, respectively. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Is there an equipment authorization waiver associated with this application? | No | |||||
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | |||||
Test Firm Name and Contact Information | ||||||
Firm Name |
Intel Corporation S.A.S.
|
|||||
DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
|
||||||
SGS Taiwan Ltd. Central RF Lab
|
||||||
SGS Taiwan Ltd. Electromagnetic Compatibility Lab
|
||||||
Name |
N**** A******
|
|||||
M****** L****
|
||||||
R******** W******
|
||||||
T****** W********
|
||||||
Telephone Number |
00334********
|
|||||
+886-********
|
||||||
+886-******** Extension:
|
||||||
+886-******** Extension:
|
||||||
88622******** Extension:
|
||||||
Fax Number |
+886-********
|
|||||
+886-********
|
||||||
+886-********
|
||||||
+8863********
|
||||||
n******@intel.com
|
||||||
m******@dekra.com
|
||||||
r******@sgs.com
|
||||||
T******@sgs.com
|
||||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
1 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
1 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
1 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
1 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
1 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
1 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
1 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
1 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
1 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
1 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
1 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
1 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
1 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
1 | 16 | 15E | CC MO | 5845 | 5885 | 0.094 | |||||||||||||||||||||||||||||||||||
1 | 17 | 15E | CC MO | 5835 | 5875 | 0.202 | |||||||||||||||||||||||||||||||||||
1 | 18 | 15E | CC MO | 5855 | 5855 | 0.214 | |||||||||||||||||||||||||||||||||||
1 | 19 | 15E | CC MO | 5815 | 5815 | 0.086 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0110000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15E | CC EP MO | 5955 | 7115 | 0.003 | |||||||||||||||||||||||||||||||||||
3 | 2 | 15E | CC EP MO | 5965 | 7085 | 0.007 | |||||||||||||||||||||||||||||||||||
3 | 3 | 15E | CC EP MO | 5985 | 7025 | 0.012 | |||||||||||||||||||||||||||||||||||
3 | 4 | 15E | CC EP MO | 6025 | 6985 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
4 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
4 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
4 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
4 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
4 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
4 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
4 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
4 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
4 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
4 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
4 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
4 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
4 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
4 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
5 | 1 | 15C | CC | 2402 | 2480 | 0.009 | |||||||||||||||||||||||||||||||||||
5 | 2 | 15C | CC MO | 2412 | 2472 | 0.979 | |||||||||||||||||||||||||||||||||||
5 | 3 | 15C | CC MO | 2422 | 2462 | 0.836 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
6 | 1 | 15C | CC | 2402 | 2480 | 0.009 | |||||||||||||||||||||||||||||||||||
6 | 2 | 15C | CC MO | 2412 | 2472 | 0.979 | |||||||||||||||||||||||||||||||||||
6 | 3 | 15C | CC MO | 2422 | 2462 | 0.836 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
7 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
7 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
7 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
7 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
7 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
7 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
7 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
7 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
7 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
7 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
7 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
7 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
7 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
7 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
7 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
8 | 1 | 15E | CC EP MO | 5955 | 7115 | 0.003 | |||||||||||||||||||||||||||||||||||
8 | 2 | 15E | CC EP MO | 5965 | 7085 | 0.007 | |||||||||||||||||||||||||||||||||||
8 | 3 | 15E | CC EP MO | 5985 | 7025 | 0.012 | |||||||||||||||||||||||||||||||||||
8 | 4 | 15E | CC EP MO | 6025 | 6985 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
9 | 1 | 15C | CC MO | 2402.00000000 | 2480.00000000 | 0.0110000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
10 | 1 | 15E | CC EP MO | 5955 | 7115 | 0.003 | |||||||||||||||||||||||||||||||||||
10 | 2 | 15E | CC EP MO | 5965 | 7085 | 0.007 | |||||||||||||||||||||||||||||||||||
10 | 3 | 15E | CC EP MO | 5985 | 7025 | 0.012 | |||||||||||||||||||||||||||||||||||
10 | 4 | 15E | CC EP MO | 6025 | 6985 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
11 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
11 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
11 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
11 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
11 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
11 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
11 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
11 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
11 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
11 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
11 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
11 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
11 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
11 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
11 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
12 | 1 | 15C | CC | 2402 | 2480 | 0.009 | |||||||||||||||||||||||||||||||||||
12 | 2 | 15C | CC MO | 2412 | 2472 | 0.979 | |||||||||||||||||||||||||||||||||||
12 | 3 | 15C | CC MO | 2422 | 2462 | 0.836 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
13 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0110000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
14 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0110000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
15 | 1 | 15E | CC EP MO | 5955 | 7115 | 0.003 | |||||||||||||||||||||||||||||||||||
15 | 2 | 15E | CC EP MO | 5965 | 7085 | 0.007 | |||||||||||||||||||||||||||||||||||
15 | 3 | 15E | CC EP MO | 5985 | 7025 | 0.012 | |||||||||||||||||||||||||||||||||||
15 | 4 | 15E | CC EP MO | 6025 | 6985 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
16 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
16 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
16 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
16 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
16 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
16 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
16 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
16 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
16 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
16 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
16 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
16 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
16 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
16 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
16 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
17 | 1 | 15C | CC | 2402 | 2480 | 0.009 | |||||||||||||||||||||||||||||||||||
17 | 2 | 15C | CC MO | 2412 | 2472 | 0.979 | |||||||||||||||||||||||||||||||||||
17 | 3 | 15C | CC MO | 2422 | 2462 | 0.836 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
18 | 1 | 15C | CC | 2402 | 2480 | 0.009 | |||||||||||||||||||||||||||||||||||
18 | 2 | 15C | CC MO | 2412 | 2472 | 0.979 | |||||||||||||||||||||||||||||||||||
18 | 3 | 15C | CC MO | 2422 | 2462 | 0.836 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
19 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0110000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
20 | 1 | 15E | CC EP MO | 5955 | 7115 | 0.003 | |||||||||||||||||||||||||||||||||||
20 | 2 | 15E | CC EP MO | 5965 | 7085 | 0.007 | |||||||||||||||||||||||||||||||||||
20 | 3 | 15E | CC EP MO | 5985 | 7025 | 0.012 | |||||||||||||||||||||||||||||||||||
20 | 4 | 15E | CC EP MO | 6025 | 6985 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
21 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
21 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
21 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
21 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
21 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
21 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
21 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
21 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
21 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
21 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
21 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
21 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
21 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
21 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
21 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
22 | 1 | 15C | CC | 2402 | 2480 | 0.009 | |||||||||||||||||||||||||||||||||||
22 | 2 | 15C | CC MO | 2412 | 2472 | 0.979 | |||||||||||||||||||||||||||||||||||
22 | 3 | 15C | CC MO | 2422 | 2462 | 0.836 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
23 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0110000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
24 | 1 | 15E | CC EP MO | 5955 | 7115 | 0.003 | |||||||||||||||||||||||||||||||||||
24 | 2 | 15E | CC EP MO | 5965 | 7085 | 0.007 | |||||||||||||||||||||||||||||||||||
24 | 3 | 15E | CC EP MO | 5985 | 7025 | 0.012 | |||||||||||||||||||||||||||||||||||
24 | 4 | 15E | CC EP MO | 6025 | 6985 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
25 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
25 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
25 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
25 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
25 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
25 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
25 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
25 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
25 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
25 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
25 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
25 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
25 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
25 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
25 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
26 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
26 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
26 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
26 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
26 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
26 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
26 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
26 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
26 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
26 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
26 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
26 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
26 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
26 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
26 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
27 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0110000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
28 | 1 | 15E | CC EP MO | 5955 | 7115 | 0.003 | |||||||||||||||||||||||||||||||||||
28 | 2 | 15E | CC EP MO | 5965 | 7085 | 0.007 | |||||||||||||||||||||||||||||||||||
28 | 3 | 15E | CC EP MO | 5985 | 7025 | 0.012 | |||||||||||||||||||||||||||||||||||
28 | 4 | 15E | CC EP MO | 6025 | 6985 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
29 | 1 | 15C | CO | 2402 | 2480 | 0.009 | |||||||||||||||||||||||||||||||||||
29 | 2 | 15C | CC MO | 2412 | 2472 | 0.979 | |||||||||||||||||||||||||||||||||||
29 | 3 | 15C | CC MO | 2422 | 2462 | 0.836 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
30 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
30 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
30 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
30 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
30 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
30 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
30 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
30 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
30 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
30 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
30 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
30 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
30 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
30 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
30 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
31 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0110000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
32 | 1 | 15C | CC | 2402 | 2480 | 0.009 | |||||||||||||||||||||||||||||||||||
32 | 2 | 15C | CC MO | 2412 | 2472 | 0.979 | |||||||||||||||||||||||||||||||||||
32 | 3 | 15C | CC MO | 2422 | 2462 | 0.836 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
33 | 1 | 15E | CC EP MO | 5955 | 7115 | 0.003 | |||||||||||||||||||||||||||||||||||
33 | 2 | 15E | CC EP MO | 5965 | 7085 | 0.007 | |||||||||||||||||||||||||||||||||||
33 | 3 | 15E | CC EP MO | 5985 | 7025 | 0.012 | |||||||||||||||||||||||||||||||||||
33 | 4 | 15E | CC EP MO | 6025 | 6985 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
34 | 1 | 15C | CC | 2402 | 2480 | 0.009 | |||||||||||||||||||||||||||||||||||
34 | 2 | 15C | CC MO | 2412 | 2472 | 0.979 | |||||||||||||||||||||||||||||||||||
34 | 3 | 15C | CC MO | 2422 | 2462 | 0.836 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
35 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0110000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
36 | 1 | 15E | CC EP MO | 5955 | 7115 | 0.003 | |||||||||||||||||||||||||||||||||||
36 | 2 | 15E | CC EP MO | 5965 | 7085 | 0.007 | |||||||||||||||||||||||||||||||||||
36 | 3 | 15E | CC EP MO | 5985 | 7025 | 0.012 | |||||||||||||||||||||||||||||||||||
36 | 4 | 15E | CC EP MO | 6025 | 6985 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
37 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
37 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
37 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
37 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
37 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
37 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
37 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
37 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
37 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
37 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
37 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
37 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
37 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
37 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
37 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
38 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
38 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
38 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
38 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
38 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
38 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
38 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
38 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
38 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
38 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
38 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
38 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
38 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
38 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
38 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
39 | 1 | 15E | CC EP MO | 5955 | 7115 | 0.003 | |||||||||||||||||||||||||||||||||||
39 | 2 | 15E | CC EP MO | 5965 | 7085 | 0.007 | |||||||||||||||||||||||||||||||||||
39 | 3 | 15E | CC EP MO | 5985 | 7025 | 0.012 | |||||||||||||||||||||||||||||||||||
39 | 4 | 15E | CC EP MO | 6025 | 6985 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
40 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0110000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
41 | 1 | 15C | CC | 2402 | 2480 | 0.009 | |||||||||||||||||||||||||||||||||||
41 | 2 | 15C | CC MO | 2412 | 2472 | 0.979 | |||||||||||||||||||||||||||||||||||
41 | 3 | 15C | CC MO | 2422 | 2462 | 0.836 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
42 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
42 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
42 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
42 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
42 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
42 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
42 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
42 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
42 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
42 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
42 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
42 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
42 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
42 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
42 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
43 | 1 | 15C | CC | 2402 | 2480 | 0.009 | |||||||||||||||||||||||||||||||||||
43 | 2 | 15C | CC MO | 2412 | 2472 | 0.979 | |||||||||||||||||||||||||||||||||||
43 | 3 | 15C | CC MO | 2422 | 2462 | 0.836 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
44 | 1 | 15E | CC EP MO | 5955 | 7115 | 0.003 | |||||||||||||||||||||||||||||||||||
44 | 2 | 15E | CC EP MO | 5965 | 7085 | 0.007 | |||||||||||||||||||||||||||||||||||
44 | 3 | 15E | CC EP MO | 5985 | 7025 | 0.012 | |||||||||||||||||||||||||||||||||||
44 | 4 | 15E | CC EP MO | 6025 | 6985 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
45 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0110000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
46 | 1 | 15C | CC | 2402 | 2480 | 0.009 | |||||||||||||||||||||||||||||||||||
46 | 2 | 15C | CC MO | 2412 | 2472 | 0.979 | |||||||||||||||||||||||||||||||||||
46 | 3 | 15C | CC MO | 2422 | 2462 | 0.836 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
47 | 1 | 15E | CC EP MO | 5955 | 7115 | 0.003 | |||||||||||||||||||||||||||||||||||
47 | 2 | 15E | CC EP MO | 5965 | 7085 | 0.007 | |||||||||||||||||||||||||||||||||||
47 | 3 | 15E | CC EP MO | 5985 | 7025 | 0.012 | |||||||||||||||||||||||||||||||||||
47 | 4 | 15E | CC EP MO | 6025 | 6985 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
48 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0110000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
49 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
49 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
49 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
49 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
49 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
49 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
49 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
49 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
49 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
49 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
49 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
49 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
49 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
49 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
49 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
50 | 1 | 15C | CC | 2402 | 2480 | 0.009 | |||||||||||||||||||||||||||||||||||
50 | 2 | 15C | CC MO | 2412 | 2472 | 0.979 | |||||||||||||||||||||||||||||||||||
50 | 3 | 15C | CC MO | 2422 | 2462 | 0.836 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
51 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0110000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
52 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
52 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
52 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
52 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
52 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
52 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
52 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
52 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
52 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
52 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
52 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
52 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
52 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
52 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
52 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
53 | 1 | 15E | CC EP MO | 5955 | 7115 | 0.003 | |||||||||||||||||||||||||||||||||||
53 | 2 | 15E | CC EP MO | 5965 | 7085 | 0.007 | |||||||||||||||||||||||||||||||||||
53 | 3 | 15E | CC EP MO | 5985 | 7025 | 0.012 | |||||||||||||||||||||||||||||||||||
53 | 4 | 15E | CC EP MO | 6025 | 6985 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
54 | 1 | 15E | CC EP MO | 5955 | 7115 | 0.003 | |||||||||||||||||||||||||||||||||||
54 | 2 | 15E | CC EP MO | 5965 | 7085 | 0.007 | |||||||||||||||||||||||||||||||||||
54 | 3 | 15E | CC EP MO | 5985 | 7025 | 0.012 | |||||||||||||||||||||||||||||||||||
54 | 4 | 15E | CC EP MO | 6025 | 6985 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
55 | 1 | 15C | CC | 2402 | 2480 | 0.009 | |||||||||||||||||||||||||||||||||||
55 | 2 | 15C | CC MO | 2412 | 2472 | 0.979 | |||||||||||||||||||||||||||||||||||
55 | 3 | 15C | CC MO | 2422 | 2462 | 0.836 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
56 | 1 | 15E | CC EP MO | 5955 | 7115 | 0.003 | |||||||||||||||||||||||||||||||||||
56 | 2 | 15E | CC EP MO | 5965 | 7085 | 0.007 | |||||||||||||||||||||||||||||||||||
56 | 3 | 15E | CC EP MO | 5985 | 7025 | 0.012 | |||||||||||||||||||||||||||||||||||
56 | 4 | 15E | CC EP MO | 6025 | 6985 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
57 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
57 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
57 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
57 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
57 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
57 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
57 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
57 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
57 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
57 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
57 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
57 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
57 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
57 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
57 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
58 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0110000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
59 | 1 | 15E | CC EP MO | 5955 | 7115 | 0.003 | |||||||||||||||||||||||||||||||||||
59 | 2 | 15E | CC EP MO | 5965 | 7085 | 0.007 | |||||||||||||||||||||||||||||||||||
59 | 3 | 15E | CC EP MO | 5985 | 7025 | 0.012 | |||||||||||||||||||||||||||||||||||
59 | 4 | 15E | CC EP MO | 6025 | 6985 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
60 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0110000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
61 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
61 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
61 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
61 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
61 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
61 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
61 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
61 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
61 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
61 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
61 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
61 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
61 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
61 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
61 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
62 | 1 | 15C | CC | 2402 | 2480 | 0.009 | |||||||||||||||||||||||||||||||||||
62 | 2 | 15C | CC MO | 2412 | 2472 | 0.979 | |||||||||||||||||||||||||||||||||||
62 | 3 | 15C | CC MO | 2422 | 2462 | 0.836 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
63 | 1 | 15E | CC EP MO | 5955 | 7115 | 0.003 | |||||||||||||||||||||||||||||||||||
63 | 2 | 15E | CC EP MO | 5965 | 7085 | 0.007 | |||||||||||||||||||||||||||||||||||
63 | 3 | 15E | CC EP MO | 5985 | 7025 | 0.012 | |||||||||||||||||||||||||||||||||||
63 | 4 | 15E | 6025 | 6985 | 0.021 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
64 | 1 | 15C | CC | 2402 | 2480 | 0.009 | |||||||||||||||||||||||||||||||||||
64 | 2 | 15C | CC MO | 2412 | 2472 | 0.979 | |||||||||||||||||||||||||||||||||||
64 | 3 | 15C | CC MO | 2422 | 2462 | 0.836 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
65 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
65 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
65 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
65 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
65 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
65 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
65 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
65 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
65 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
65 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
65 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
65 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
65 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
65 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
65 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
66 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0110000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
67 | 1 | 15C | CC | 2402 | 2480 | 0.009 | |||||||||||||||||||||||||||||||||||
67 | 2 | 15C | CC MO | 2412 | 2472 | 0.979 | |||||||||||||||||||||||||||||||||||
67 | 3 | 15C | CC MO | 2422 | 2462 | 0.836 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
68 | 1 | 15E | CC EP MO | 5955 | 7115 | 0.003 | |||||||||||||||||||||||||||||||||||
68 | 2 | 15E | CC EP MO | 5965 | 7085 | 0.007 | |||||||||||||||||||||||||||||||||||
68 | 3 | 15E | CC EP MO | 5985 | 7025 | 0.012 | |||||||||||||||||||||||||||||||||||
68 | 4 | 15E | CC EP MO | 6025 | 6985 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
69 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
69 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
69 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
69 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
69 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
69 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
69 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
69 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
69 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
69 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
69 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
69 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
69 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
69 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
69 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
70 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0110000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC