FCC ID: 2AY2P-AMF41W 4K60 BYOD Presentation Switcher

AMF41W Quick Reference Guide Introduction The AMF41W is an advanced 4K multi-format presentation switch featuring 4 x HDMI, AirPlay and Miracast inputs to a single HDMI output. The AMF41W provides enhanced features including localised 2.4/5G WiFi hotspot, seamless switching, multiview presentation, video scaling and Web GUI for control and configuration. The AMF41W also features auto display control via RS-232, manual or automated source selection and control via front panel and TCP/IP. The AMF41W is an ideal product for your boardroom, classroom or huddle-space application. 01 AMF41W QUICK REFERENCE GUIDEContact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk FEATURES:

Features 4 x HDMI, AirPlay and Miracast inputs which can be switched to a single HDMI output Localised 2.4G/5G WiFi hotspot to host AirPlay and Miracast local streaming to AMF41W Multiview presentation with up to 7 concurrent video signals and configurable screen layout Seamless switching of sources in both single or multiview mode In-built video scaler with output timing up to 4K 60Hz 4:4:4 HDMI inputs support resolutions up to 4K 30Hz 4:4:4 Supports AirPlay mirroring and Miracast point-to-point mode (up to 1080p) Audio breakout to analogue L/R audio LAN connection for integration to existing network infratructures Auto display on / off feature allowing control of display via RS-232 Web interface module for control and configuration of switch Control via front panel and TCP/IP with manual or auto source selection Features PoE support for powering the device from any PoE switch 02 AMF41W QUICK REFERENCE GUIDEwww.blustream.com.au | www.blustream-us.com | www.blustream.co.uk Front Panel Description 1 2 3 4 5 6 1 Power LED Indicator - Illuminates when the device is powered on 2 Status LED Indicator - Illuminates when the device is outputting at least one source

- Flashes when the device is in standby mode

- Turns off when the device is outputting the guide screen 3 Input Selection LED - Illuminates when video input has a valid signal and is shown on the display,

- Flashes once a second when input does not have a signal but is shown in the current layout

- Flashes once every two seconds when video input has a valid signal but is not shown on the display

- Off when the video input signal is neither valid nor shown in the layout, or device is in standby 4 Input Selection Buttons - Short press to select / deselect the input signal between HDMI 1 to 4, long press to view video source in full screen mode 5 USB Socket - Reserved for future use 6 Reset Button - Push and hold for 10 seconds to factory reset the device Rear Panel Description 1 2 3 4 5 6 7 8 1 WiFi Antenna Connection 1 - Connect to supplied WiFi antenna 2 Power Port Use included 12V/2A DC adaptor 3 HDMI Inputs 1-4 - Connect to HDMI source equipment 4 HDMI Output - Connect to HDMI display equipment 5 Analogue Audio Output - 3.5mm stereo analogue audio output to connect to external audio distribution equipment or amplifier. Supports 2ch PCM only 6 TCP/IP Port - RJ45 connector to connect to LAN for TCP/IP control of device and to access Web GUI 7 RS-232 Port - 4-pin Phoenix connector for control of source or display from the AMF41W, also includes a 12V output pin to trigger local device 8 WiFi Antenna Connection 2 - Connect to supplied WiFi antenna NOTE: The distance between user and products should be no less than 20cm. La distance entre lutilisateur et le produit ne doit pas tre infrieure 20 cm. La bande de 5.2 GHz est rserve lusage intrieur. WARNING: 5.2 GHz band is restricted to indoor use only. 03 AMF41W QUICK REFERENCE GUIDEContact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk Configuration and Web GUI Control The AMF41W features an in-built Web GUI which is required for control and configuration of the device. This configuration includes features such as source EDID management, output scaler resolution, network / WiFi configuration and user control. You can connect to the AMF41W either via hardwired LAN connection or via local WiFi hotspot. Connecting via LAN:

By default this device is set to DHCP, however if a DHCP server (eg: network router) is not installed or you connect directly from your PC to the AMF41W, the IP address will revert to the below details:

Default Username is: blustream Default Password is: 1234 If the AMF41W is connected to a pre-existing network then it will be provided an IP Address via DHCP. There are several ways in which you can find the IP address of the device as follows:

Default IP Address is: 192.168.0.200 The On Screen Display shows the IP address of the product in the lower right corner of the screen (item A in the image below). Use a 3rd party IP scanning tool on your PC to find the IP address of the AMF41W. Connecting via Local WiFi Hotspot:

This device can broadcast its own local WiFi hotspot which users can connect to in order to stream content to the device, or control and configure it. The default local WiFi hotspot settings are as follows:

Default Device ID / SSID is: Blustream_AMF41W Default SSID Password is: 12345678 Default BYOD PIN is: N/A It is also possible to disable the local WiFi hotspot and hardwire the AMF41W into a pre-existing data network. You would then use the pre-existing WiFi access points to connect to the network and communicate with the AMF41W. A BYOD (Bring Your Own Device) Connectivity The on screen display shows a connection guide when no input devices (HDMI or BYOD) are being viewed. This illustrates how to connect your laptop, tablet or smartphone (BYOD device) to the unit. There are various technologies utilised to ensure your smart device is capable of broadcasting a video to the AMF41W without any apps required. These are:

AirPlay (Apple devices) Miracast, SmartView or ScreenCast (Android devices) Wireless Display Sharing (Windows 10 devices) For further information please see the AMF41W User Manual - available to download from the Blustream website. 04 AMF41W QUICK REFERENCE GUIDEwww.blustream.com.au | www.blustream-us.com | www.blustream.co.uk Installation and Wiring Note: Before installation, please ensure the device is disconnected from the power source. Steps to install the device:

1. 2. Attach the mounting brackets to the chassis using the screws provided. The mounting brackets are attached to the chassis as shown below:

3. 4. Repeat steps 1-2 for the second mounting bracket on the other side of the chassis. Attach the brackets to the surface you want to hold the device against using sufficient screws (Diameter:

2.5~3mm; Length: 6~8mm; self-tapping screws, not included). 05 AMF41W QUICK REFERENCE GUIDEContact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk RS-232 Configuration The RS-232 port is used for control of source or display from the AMF41W. The default RS-232 communication settings are:

Baud Rate: 57600 Stop Bit: 1 Data Bit: 8 Parity Bit: none Specifications Video Input Connectors: 4 x HDMI Type A, 19-pin, female Video Output Connectors: 1 x HDMI Type A, 19-pin, female Audio Output Connectors: 1 x 3.5mm stereo jack (2ch analogue audio) RS-232 Serial Port: 1 x 4-pin Phoenix connector TCP/IP Control: 1 x RJ45, female USB Connector (reserved): 1 x USB Type A, female WiFi Antenna Connections: 2 x SMA, female WiFi Specification for Europe only:

Dimensions (W x H x D): 215mm x 25mm x 141mm Shipping Weight: 1.5Kg Operating Temperature: 0C to 45C (32F to +113F) Storage Temperature: -20C to 70C (-4F to +158F) Power Supply: Class 1 802.3af PoE PD or 12V/2A DC 2.4GHz EIRP < 20dBm 5.150~5.250GHz EIRP < 23dBm 5.725~5.850GHz EIRP < 13.98dBm NOTE: Specifications are subject to change without notice. Weights and dimensions are approximate. For wall mounted installations, height may exceed 2m. Package Contents 1 x AMF41W 1 x 4-pin Phoenix Connector (RS-232) 2 x Antenna 1 x Mounting Kit 4 x M2.5*5mm screws 1 x Quick Reference Guide 1 x 12V/2A DC Power Supply Please read the entire manual carefully before operating this device. 06 Power Supply Specification Model: NBS24J120200D5 Rated Input: 100-240VAC, 50/60Hz, 0.6A Rated Output: 12VDC, 2.0A Includes: US changeable plug, EU changeable plug, AU changeable plug, UK changeable plug Manufacturer: Shenzhen Mass Power Electronic Limited Address: 437#, Hedong Village, Hengkeng Community, GuanlanStreet, Baoan District, 518110 Shenzhen, P. R. China AMF41W QUICK REFERENCE GUIDEwww.blustream.com.au | www.blustream-us.com | www.blustream.co.uk Certifications FCC NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAUTION - changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. CANADA, INDUSTRY CANADA (IC) NOTICES This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes: 1. Lappareil ne doit pas produire de brouillage; 2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. CORRECT DISPOSAL OF THIS PRODUCT This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling. 07 AMF41W QUICK REFERENCE GUIDEContact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk Notes 08 AMF41W QUICK REFERENCE GUIDEwww.blustream.com.au | www.blustream-us.com | www.blustream.co.ukREVA4_QRG_AMF41W_210603

Blustream PTY LTD Letter of Authorization Company: Blustream PTY LTD Address: 26 Lionel Rd, Mount Waverley, Melbourne, Victoria, 3149, Australia Product Type: 4K60 BYOD Presentation Switcher Model Number(s): AMF41W Product Description: 4K60 BYOD Presentation Switcher We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Date: 2021-05-14 Signature: 7 _ Name: Martyn ae Title: Director Company: Blustream PTY LTD

Blustream PTY LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2021-05-14 Subject; Request for Confidentiality FCC ID: 2AY2P-AMF41W To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market.

[>x]Schematic Diagram

[XIBlock Diagram

[ |Parts List

[{x<]Operational Description L_|Tune-up Procedure

[X]FCC Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

ix]External Photos ix]Test Setup Photos

[x]Internal Photos

}x]User Manual L_|For 45 days, pursuant to Public Notice DA 04-1705. OR

[X]For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Martyn Shirley Title: Director re}

SL/L EUN

Blustream PTY LTD

FCC Software Configuration Control Declaration

Date: July 9, 2021

Federal Communications Commission

Authorization and Evaluation Division

7435 Oakland Mills Road

Columbia, MD 21046

Attn: OET Dept.

Product/ Model Number: 4K60 BYOD Presentation Switcher/ AMF41W

Regarding FCC Country Code Selection guidelines identified in KDB 594280 D01 V02r01.

“All applications for equipment authorization for transmitters that can have radio

parameters, or other technical parameters, reported to the Commission set by software

must have an attestation indicating that no third party will have software, or configuration

control, to program the device out of compliance of the technical rules under which it has

been certified.”

We declare that no third party will have software, or configuration control, to program the device

out of compliance of the technical rules under which it has been certified.

Name:

Title:

Date: 2021/05/14

Martyn Shirley

Director

Signature of applicant

FCC Software Configuration Control Declaration