FCC ID: 2AY2P-WMF51 Wireless Multiview Presentation Switcher

WMF51_QRG_REVA2_Print.pdf 1 28/02/2024 11:00 WMF51 QUICK REFERENCE GUIDE WMF51 Quick Reference Guide C M Y CM MY CY CMY K Introduction The WMF51 is a 4K multi-format presentation switch featuring AirPlay, Miracast and Chromecast inputs to a single HDMI output. The WMF51 provides enhanced features including multi-view presentation, video scaling, a web-GUI for control and configuration, localised 2.4/5G WiFi hotspot and dual LAN connectivity. The WMF51 also features OSD control, USB touch-back to connected host device, whiteboard and screen overlay annotation, with manual or automated source selection. The WMF51 can be controlled via front panel, RS-232 or TCP/IP. The WMF51 is also compatible with Blustream WMF-USBC and WMF-HDMI plug and play wireless dongles, providing an ideal BYOD solution for your boardroom, classroom, or huddle-space application. FEATURES:

4K multi-format multi-view presentation switch Features AirPlay, Miracast, Chromecast and Blustream wireless dongle support which can be switched to a single HDMI output In-built video scaler with output timing up to 4K 60Hz 4:4:4 Multiview presentation with up to 4 concurrent video signals with configurable screen layout Localised 2.4G/5G WiFi hotspot to host AirPlay, Miracast and Chromecast local point-to-point mode (up to 1080p) Dual LAN connection for integration to existing network infratructures Supports USB touch-back feature via WMF-USBC and WMF-HDMI dongles and Miracast*

Audio breakout to analogue L/R audio Web interface module for control and configuration of unit OSD control with preview function Whiteboard and screen overlay annotation feature Control via front panel, RS-232 and TCP/IP with manual or auto source selection Features Class 0 IEEE 802.3af PoE for powering of product from a PoE switch

*Miracast touch-back compatibility subject to Windows features Contact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk 01 WMF51_QRG_REVA2_Print.pdf 2 28/02/2024 11:00 Front Panel Description WMF51 QUICK REFERENCE GUIDE 1 2 3 1 USB-A / USB-C Dongle Pairing Ports - Connect Blustream WMF-HDMI or WMF-USBC wireless dongles to corresponding port to pair with the WMF51. WMF51 video output will display information regarding the automatic pairing and firmware update process. Please note: wireless dongles sold separately 2 Standby Button - Press to turn on or o the WMF51 3 Power LED Indicator - Illuminates when the device is powered on Rear Panel Description C M Y CM MY CY CMY K 1 2 3 4 5 6 7 8 9 10 11 1 WiFi Antenna Connection (1) - Connect supplied WiFi antenna 2 RS-232 Port - 3-pin Phoenix connector for control of the WMF51 3 Analogue L/R Output - 3.5mm stereo jack for analogue audio break out (2ch PCM audio only) 4 USB 3.0 Connector - Connect to USB mouse/keyboard 5 Reset button - Press and hold reset button for 10 seconds to return the WMF51 to factory default settings 6 HDMI Output - Connect to HDMI display equipment 7 WiFi Antenna Connection (2) - Connect supplied WiFi antenna 8 TCP/IP Port 1 - 100Mbps RJ45 connector to connect to LAN for TCP/IP control of device and to access web-GUI 9 TCP/IP PoE Port 2 - 1Gbps RJ45 connector to connect to LAN for TCP/IP control of device and to access Web GUI, includes PoE function to power device q Power Port Use included 12v/1.5A DC adaptor w WiFi Antenna Connection (3) - Connect supplied WiFi antenna NOTE: The distance between user and products should be no less than 20cm. La distance entre lutilisateur et le produit ne doit pas tre infrieure 20 cm. La bande de 5.2 GHz est rserve lusage intrieur. WARNING: 5.2 GHz band is restricted to indoor use only. 02 www.blustream.com.au | www.blustream-us.com | www.blustream.co.uk WMF51_QRG_REVA2_Print.pdf 3 28/02/2024 11:00 WMF51 QUICK REFERENCE GUIDE Configuration and Web-GUI Control The WMF51 features an in-built web-GUI which is required for control and configuration of the device. This configuration includes features such as source EDID management, output scaler resolution, network / WiFi configuration, and user control. You can connect to the WMF51 either via hardwired LAN connection, or via local WiFi hotspot. Connecting via LAN:

By default this device is set to DHCP, however if a DHCP server (eg: network router) is not installed or you connect directly from your PC to the WMF51, the IP address will revert to the below details:

Default Username is: blustream Default Password is: 1234 If the WMF51 is connected to a pre-existing network then it will be provided an IP Address via DHCP. There are several ways in which you can find the IP address of the device as follows:

Default IP Address is: 192.168.0.200 The On Screen Display shows the IP address of the product in the lower le corner of the screen (item A in the image below). Use a 3rd party IP scanning tool on your PC to find the IP address of the WMF51. Connecting via Local WiFi Hotspot:

This device can broadcast its own local WiFi hotspot which users can connect to in order to stream content to the device, or control and configure it. The default local WiFi hotspot settings are as follows:

Default Device ID / SSID is: Blustream_WMF51 Default SSID Password is: 1234 Default BYOD PIN is: N/A It is also possible to disable the local WiFi hotspot and hardwire the WMF51 into a pre-existing data network. You would then use the pre-existing WiFi access points to connect to the network and communicate with the WMF51. C M Y CM MY CY CMY K A BYOD (Bring Your Own Device) Connectivity The on screen display shows a connection guide when no input devices are being viewed. This illustrates how to connect your laptop, wireless dongles, tablet or smartphone (BYOD device) to the unit. There are various technologies utilised to ensure your smart device is capable of broadcasting a video to the WMF51 without any apps required. These are:

AirPlay (Apple devices) Miracast, SmartView or ScreenCast (Android devices) Chromecast (Google devices) Wireless Display Sharing (Windows 10 devices) For further information please see the WMF51 User Manual - available to download from the Blustream website. Contact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk 03 WMF51_QRG_REVA2_Print.pdf 4 28/02/2024 11:00 WMF51 QUICK REFERENCE GUIDE RS-232 Configuration The RS-232 port is used for control of source or display from the WMF51. The default RS-232 communication settings are:

Baud Rate: 57600 Stop Bit: 1 Data Bit: 8 Parity Bit: none Specifications Video Output Connectors: 1 x HDMI Type A, 19-pin, female Audio Output Connectors: 1 x 3.5mm stereo jack (2ch analogue audio) RS-232 Serial Port: 1 x 3-pin Phoenix connector TCP/IP Control: 2 x RJ45, female (1000Mbps x1, 100Mbps x1) USB Connector: 1 x USB 3.0 Type A female USB Pairing Connector: 1 x USB 2.0 Type A female, 1 x USB Type C female WiFi Antenna Connections: 3 x SMA, female connector, MIMO antennas (2.4G & 5G, WIFI IEEE 802.11 b/g/n/ac up to 1200Mbps) WiFi Encryption: AES WPA PSK, WPA2 PSK WiFi Specification for Europe only: 2.4GHz EIRP < 20dBm 5.725~5.850GHz EIRP <13.98dBm Dimensions (W x H x D): 165mm x 22mm x 90mm (excluding antennas) Shipping Weight: 1.5kg Operating Temperature: 0C to 45C (32F to +113F) Storage Temperature: -20C to 70C (-4F to +158F) Power Supply: Class 0 IEEE 802.3af PoE PD or 12v/1.5A DC NOTE: Specifications are subject to change without notice. Weights and dimensions are approximate. For wall mounted installations, height may exceed 2m. C M Y CM MY CY CMY K Package Contents 1 x WMF51 1 x 3-pin Phoenix Connector (RS-232) 3 x Antenna 1 x Mounting Kit 1 x Quick Reference Guide 1 x 12v/1.5A DC Power Supply Please read the entire manual carefully before operating this device. Power Supply Specification Model: GME18A-120150FXR Rated Input: 100-240vAC 50/60Hz 0.8A Rated Output: 12.0v 1.5A 18.0W Includes: US changeable plug, EU changeable plug, AU changeable plug, UK changeable plug Manufacturer: GME Technology Co.,Ltd Address: Building A19, Tantou West Industrial Park, Songgang Street, Baoan District, Shenzhen, Guangdong 04 www.blustream.com.au | www.blustream-us.com | www.blustream.co.uk WMF51_QRG_REVA2_Print.pdf 5 28/02/2024 11:00 WMF51 QUICK REFERENCE GUIDE Certifications FCC NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAUTION - changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. CANADA, INDUSTRY CANADA (IC) NOTICES This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes: 1. Lappareil ne doit pas produire de brouillage; 2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. CORRECT DISPOSAL OF THIS PRODUCT This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling. C M Y CM MY CY CMY K FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Contact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk 05 WMF51_QRG_REVA2_Print.pdf 6 28/02/2024 11:00 Notes WMF51 QUICK REFERENCE GUIDE C M Y CM MY CY CMY K 06 www.blustream.com.au | www.blustream-us.com | www.blustream.co.uk WMF51_QRG_REVA2

12345167 8 9 111213141516171819 Product: Wireless Multiview Presentation Switcher Model: WMF51 DC12V === 1.5A E UK IC: 27021-WMF51 Cc A FCC ID: 2AY2P-WMF51 Manufacturer: Blustream Pty Limited Address: 24 Lionel Road, Mount Waverley, Victoria,3149,Australia Importer : Blustream Pty Limited Address: 24 Lionel Road, Mount Waverley, Victoria,3149, Australia FCC STATEMENT :

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation

- Blustream Pty Limited -

Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S. Agent Designation 3/21/24

[Blustream Pty Limited] acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: [2AY2P-

WMF51]):

Name and company of U.S. agent: Linkwld LLC Physical U.S. address of agent: 1942 Broadway St. STE 314C, Boulder, CO, 80302, US FRN of U.S. agent: 0033625682 Email address of U.S. agent: Timothy.linkwld@proton.me Linkwld LLC acknowledges their obligation to accept service of process on behalf of [Blustream Pty Limited].

[Blustream Pty Limited] with the FRN [0030637235] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-

related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature

[Name] Martyn Shirley

[Title] Director

[Company] Blustream Pty Limited 5 0 V

, U

) 7

) d

1 1 9 2 _ t n e g A _ S U

l e d o m

_ 8 4 Signature

[Name of U.S. agent] Timothy Zhu

[Title of U.S. agent] Manager

[Company of U.S. agent] Linkwld LLC

- Blustream PTY LTD-

Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 3/23/24 To whom it may concern:

We, [Blustream PTY LTD], hereby certify that the equipment for which authorization is sought (FCC ID: [2AY2P-WMF51]) is not covered equipment prohibited from receiving an equipment authorization pursuant to 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing covered equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(b) and (d)(5) and (6). Sincerely, 2 0 V

, U

) i i

d n a

) i

) 5

) d

1 1 9 2 _ u q E d e r e v o C

l e d o m

_ 2 6 Signature

[Martyn Shirley]

[Director]

[Blustream PTY LTD]

The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01.