|
app
s
|
Applicant Information
|
|
|
1 2 3 4 5 6 7 8 9
|
Effective |
2017-09-26
|
|
1 2 3 4 5 6 7 8 9
|
2017-08-19
|
|
1 2 3 4 5 6 7 8 9
|
2017-08-12
|
|
1 2 3 4 5 6 7 8 9
|
2017-07-08
|
|
1 2 3 4 5 6 7 8 9
|
2017-02-25
|
|
1 2 3 4 5 6 7 8 9
|
2017-02-17
|
|
1 2 3 4 5 6 7 8 9
|
Applicant's complete, legal business name |
DynaScan Technology Corp.
|
|
1 2 3 4 5 6 7 8 9
|
FCC Registration Number (FRN) |
0026170399
|
|
1 2 3 4 5 6 7 8 9
|
Physical Address |
7F, 66 Huaya 1st Road, Guishan
|
|
1 2 3 4 5 6 7 8 9
|
Taoyuan, N/A 33383
|
|
1 2 3 4 5 6 7 8 9
|
Taiwan
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4 5 6 7 8 9
|
TCB Application Email Address |
s******@nemko.com
|
|
1 2 3 4 5 6 7 8 9
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4 5 6 7 8 9
|
Grantee Code |
2AKWY
|
|
1 2 3 4 5 6 7 8 9
|
Equipment Product Code |
PFB201
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4 5 6 7 8 9
|
Name |
A**** K******
|
|
1 2 3 4 5 6 7 8 9
|
Telephone Number |
+8863******** Extension:
|
|
1 2 3 4 5 6 7 8 9
|
Fax Number |
+8863********
|
|
1 2 3 4 5 6 7 8 9
|
E-mail |
a******@dynascan.com.tw
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 5 6 7 8 9 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 5 6 7 8 9 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 5 6 7 8 9 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 03/25/2018 |
| 1 2 3 4 5 6 7 8 9 | 02/15/2018 |
| 1 2 3 4 5 6 7 8 9 | 02/08/2018 |
| 1 2 3 4 5 6 7 8 9 | 01/04/2018 |
| 1 2 3 4 5 6 7 8 9 | 08/25/2017 |
| 1 2 3 4 5 6 7 8 9 | 08/16/2017 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 5 6 7 8 9 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 5 6 7 8 9 | Equipment Class | DTS - Digital Transmission System |
| 1 2 3 4 5 6 7 8 9 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Control Board |
| 1 2 3 4 5 6 7 8 9 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 4 5 6 7 8 9 | Modular Equipment Type | Limited Single Modular Approval |
| 1 2 3 4 5 6 7 8 9 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
| 1 2 3 4 5 6 7 8 9 | Original Equipment |
| 1 2 3 4 5 6 7 8 9 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | No |
| 1 2 3 4 5 6 7 8 9 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 4 5 6 7 8 9 | Grant Comments | Limited Single Modular Approval. Output power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in the final host configurations (Brand: DynaScan; Model: DI551ST2) is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20MHz and 40 MHz bandwidth modes.
Class II Permissive Change: address the module in a new host of DynaScan, model number: DS751LT5, as documented in this filing. |
| 1 2 3 4 5 6 7 8 9 | Limited Single Modular Approval. Output power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in the final host configurations (Brand: DynaScan; Model: DI551ST2) is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20MHz and 40 MHz bandwidth modes.
Class II Permissive Change: address the module in a new host of DynaScan, model number: DS551DR4, as documented in this filing. |
| 1 2 3 4 5 6 7 8 9 | Limited Single Modular Approval. Output power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in the final host configurations (Brand: DynaScan; Model: DI551ST2) is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20MHz and 40 MHz bandwidth modes.
Class II Permissive Change: address the module in a new host of DynaScan, model number: DS371BT4, as documented in this filing. |
| 1 2 3 4 5 6 7 8 9 | Limited Single Modular Approval. Output power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in the final host configurations (Brand: DynaScan; Model: DI551ST2) is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20MHz and 40 MHz bandwidth modes.
Class II Permissive Change: address the module in a new host of DynaScan, model number: DS491LT4, as documented in this filing. |
| 1 2 3 4 5 6 7 8 9 | Limited Single Modular Approval. Output power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in the final host configurations (Brand: DynaScan; Model: DI551ST2) is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20MHz and 40 MHz bandwidth modes.
Class II Permissive Change: address the module in a new host of DynaScan, model number: DS491LT6, as documented in this filing. |
| 1 2 3 4 5 6 7 8 9 | Limited Single Modular Approval. Output power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in the final host configurations (Brand: DynaScan; Model: DI551ST2) is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20MHz and 40 MHz bandwidth modes.
Class II Permissive Change: address the module in a new host of DynaScan, model number: DS552LT4-1, as documented in this filing. |
| 1 2 3 4 5 6 7 8 9 | Limited Single Modular Approval. Output power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in the final host configurations (Brand: DynaScan; Model: DI551ST2) is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20MHz and 40 MHz bandwidth modes.
Class II Permissive Change: address the module in a new host of DynaScan, model number: DS552LT6-1, as documented in this filing. |
| 1 2 3 4 5 6 7 8 9 | Limited Single Modular Approval. Output power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in the final host configurations (Brand: DynaScan; Model: DI551ST2) is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20MHz and 40 MHz bandwidth modes.
Class II Permissive Change: address the module in a new host of DynaScan, model number: DI651ST2, as documented in this filing. |
| 1 2 3 4 5 6 7 8 9 | Limited Single Modular Approval. Output power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in the final host configurations (Brand: DynaScan; Model: DI551ST2) is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20MHz and 40 MHz bandwidth modes. |
| 1 2 3 4 5 6 7 8 9 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 5 6 7 8 9 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4 5 6 7 8 9
|
Firm Name |
MRT Technology (Taiwan) Co.,Ltd
|
|
1 2 3 4 5 6 7 8 9
|
Name |
C****** K********
|
|
1 2 3 4 5 6 7 8 9
|
Telephone Number |
+886-********
|
|
1 2 3 4 5 6 7 8 9
|
Fax Number |
+886-********
|
|
1 2 3 4 5 6 7 8 9
|
E-mail |
c******@mrt-cert.com
|
|