all | frequencies |
|
|
|
|
|
|
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
manuals | photos | labels |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 4 |
|
User Manual Host | Users Manual | 1.75 MiB | August 19 2022 / August 25 2022 | |||
1 2 3 4 |
|
User Manual module | Users Manual | 690.08 KiB | August 19 2022 / August 25 2022 | |||
1 2 3 4 |
|
Users Manual | Users Manual | 2.05 MiB | November 16 2023 / November 17 2023 | |||
1 2 3 4 |
|
Users Manual for module | Users Manual | 824.67 KiB | November 16 2023 / November 17 2023 | |||
1 2 3 4 |
|
Internal Photos | Internal Photos | 3.69 MiB | November 16 2023 / November 17 2023 | |||
1 2 3 4 |
|
Internal Photos revised 0819 | Internal Photos | 2.47 MiB | August 19 2022 / August 25 2022 | |||
1 2 3 4 |
|
External Photos | External Photos | 520.79 KiB | November 16 2023 / November 17 2023 | |||
1 2 3 4 |
|
External Photos revised 0819 | External Photos | 610.63 KiB | August 19 2022 / August 25 2022 | |||
1 2 3 4 |
|
ID Label/Location Info | ID Label/Location Info | 282.49 KiB | November 16 2023 / November 17 2023 | |||
1 2 3 4 |
|
ID Label/Location Info revised 0819 | ID Label/Location Info | 301.77 KiB | August 19 2022 / August 25 2022 | |||
1 2 3 4 |
|
Authority to Act as Agent | Cover Letter(s) | 32.68 KiB | November 16 2023 / November 17 2023 | |||
1 2 3 4 | Block Diagram | Block Diagram | November 16 2023 | confidential | ||||
1 2 3 4 |
|
C2PC | Cover Letter(s) | 7.92 KiB | November 16 2023 / November 17 2023 | |||
1 2 3 4 |
|
Confidentiality Request Letter | Cover Letter(s) | 34.73 KiB | November 16 2023 / November 17 2023 | |||
1 2 3 4 |
|
MPE Report | RF Exposure Info | 358.22 KiB | November 16 2023 / November 17 2023 | |||
1 2 3 4 | Operational Description | Operational Description | November 16 2023 | confidential | ||||
1 2 3 4 | Schematics | Schematics | November 16 2023 | confidential | ||||
1 2 3 4 |
|
Test Report DTS | Test Report | 1.86 MiB | November 16 2023 / November 17 2023 | |||
1 2 3 4 |
|
Test Setup Photos DTS | Test Setup Photos | 2.21 MiB | November 16 2023 / November 17 2023 | |||
1 2 3 4 |
|
agent-letter | Attestation Statements | 84.95 KiB | November 16 2023 / November 17 2023 | |||
1 2 3 4 |
|
covered list attestation | Attestation Statements | 57.91 KiB | November 16 2023 / November 17 2023 | |||
1 2 3 4 |
|
Test Report NII | Test Report | 3.37 MiB | November 16 2023 / November 17 2023 | |||
1 2 3 4 |
|
Test Setup Photos NII | Test Setup Photos | 850.35 KiB | November 16 2023 / November 17 2023 | |||
1 2 3 4 |
|
Channel 12 and 13 Declaration Letter | Cover Letter(s) | 63.73 KiB | August 19 2022 / August 25 2022 | |||
1 2 3 4 |
|
Confidentiality | Cover Letter(s) | 34.87 KiB | August 19 2022 / August 25 2022 | |||
1 2 3 4 |
|
Modular approval letter | Cover Letter(s) | 81.61 KiB | August 19 2022 / August 25 2022 | |||
1 2 3 4 |
|
RF Exposure Info | RF Exposure Info | 1.00 MiB | August 19 2022 / August 25 2022 | |||
1 2 3 4 | Schematics RF module | Schematics | August 19 2022 | confidential | ||||
1 2 3 4 |
|
Test Report-1 | Test Report | 5.61 MiB | August 19 2022 / August 25 2022 | |||
1 2 3 4 |
|
Test Report-2 | Test Report | 3.36 MiB | August 19 2022 / August 25 2022 | |||
1 2 3 4 |
|
Test Setup Photos Conducted emission | Test Setup Photos | 249.21 KiB | August 19 2022 / August 25 2022 | |||
1 2 3 4 |
|
Test Setup Photos Radiated emission | Test Setup Photos | 441.12 KiB | August 19 2022 / August 25 2022 | |||
1 2 3 4 | Schematics module | Schematics | August 19 2022 | confidential | ||||
1 2 3 4 | Software Security Info | Operational Description | August 19 2022 | confidential | ||||
1 2 3 4 |
|
Test Report-3 | Test Report | 2.16 MiB | August 19 2022 / August 25 2022 |
1 2 3 4 | User Manual Host | Users Manual | 1.75 MiB | August 19 2022 / August 25 2022 |
DW551DR4-1 USER MANUAL 55 Dual Side Digital Signage Display 65512 | V2.02 Contents Material Contents Declaration ................................................................................................................ 2 Recycling and Energy Information ......................................................................................................... 2 Declaration of Conformity ....................................................................................................................... 3 Dclaration de conformit....................................................................................................................... 4 Safety Precautions ................................................................................................................................. 5 Prcautions relatives la scurit .......................................................................................................... 6 Important Safety Information .................................................................................................................. 7 Informations importantes relatives la scurit ..................................................................................... 8 Getting Started ....................................................................................................................................... 9 Contents ............................................................................................................................................. 9 Installing and Replacing Remote Control Batteries ............................................................................ 9 Bien dbuter ......................................................................................................................................... 10 Contenu ............................................................................................................................................ 10 Mise en place et remplacement des piles de la tlcommande....................................................... 10 Installation............................................................................................................................................. 11 Connecting to a Power Source ......................................................................................................... 14 Connecting an External Video Source ............................................................................................. 14 Input / Output Terminals ................................................................................................................... 15 Operating Instructions .......................................................................................................................... 15 Powering On/Off the Display ............................................................................................................ 16 Using the Remote Control ................................................................................................................ 17 Navigating the On Screen Display (OSD) Menu .................................................................................. 19 Specifications ....................................................................................................................................... 24 Input Mode ............................................................................................................................................ 25 Pin Assignments ................................................................................................................................... 26 RS-232 Input .................................................................................................................................... 26 Troubleshooting .................................................................................................................................... 27 About DSM365 ..................................................................................................................................... 28 1 Material Contents Declaration Part Name Lead Mercury Cadmium Hazardous Substances Hexavalent Chromium Cr6+
O O O O Polybrominated Biphenyls PBB O O O O Polybromodiphenyl Ethers PBDE O O O O PCBA CHASSIS ACCESSORY PACKAGE O indicates that the level of the specified chemical substance is less than the threshold level specified in the standards of SJ/T-11363-2006 and EU 2011/65/EC. indicates that the level of the specified chemical substance exceeds the threshold level specified in the standards of SJ/T-11363-2006 and EU 2011/65/EC. Pb O O O O Hg O O O O Cd O O O O Recycling and Energy Information DynaScan is firmly committed to its environmental protection efforts and we believe that reducing our products impact on the environment is of the utmost importance. We are dedicated to meet the latest environmental protection regulations. Energy usage Mode Normal Standby Energy Consumption Max. 380W
< 1W Disposal Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being. When replacing old appliances with new one, the retailer is legally obligated to take back your old appliances for disposal at least for free of charge. DW551DR4-1 User Manual 2 Declaration of Conformity FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF exposure warning To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. Manufacturer Name DynaScan Technology Corp. Manufacturer Address 6F, No. 88 Wenmao Rd., Guishan Dist, Taoyuan City 333001,Taiwan This device complies with Directive 2014/53/EU issued by the Commission of the European Community. Article 3.1 (a) EN 62368-1 :2014+A11 :2017 IEC 62368-1 :2014 IEC 62368-1 :2018 Article 3.2 ETSI EN 300 328 V2.2.2 ETSI EN 301 893 V2.1.1 EN IEC 62311 :2020 Article 3.1 EN 55032 :2015+A1 :2020 EN IEC 61000-3-2 :2019+A1 :2021 EN 61000-3-3 :2013+A1 :2019 EN 55035 :2017+A11 :2020 ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4 DW551DR4-1 User Manual 3 Dclaration de conformit FCC Cet appareil est conforme la section 15 de la rglementation FCC. Son utilisation est sujette aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interfrence nuisible, et (2) cet appareil doit accepter toute interfrence reue, y compris celles qui peuvent causer un fonctionnement non souhait. D CLARATION DE LA COMMISSION F D RALE DES COMMUNICATIONS Cet quipement a t test et dclar conforme aux limites d'un appareil numrique de classe A, conformment la partie 15 des rgles FCC. Ces limites sont conues pour fournir une protection raisonnable contre les interfrences nuisibles lorsque l'quipement est utilis dans un environnement commercial. Ce l'quipement gnre, utilise et peut mettre de l'nergie radiofrquence et, s'il n'est pas install et utilis conformment au manuel d'instructions, peut provoquer des interfrences nuisibles aux communications radio. Le fonctionnement de cet quipement dans une zone rsidentielle est susceptible de provoquer des interfrences nuisibles, auquel cas l'utilisateur devra corriger les interfrences ses propres frais. ATTENTION :
Tout changement ou modification, non expressment approuv par le responsable de la conformit, peut rvoquer lautorit de l'utilisateur employer l'appareil en question. Nom du fabricant DynaScan Technology Corp. Adresse du fabricant 6F, No. 88 Wenmao Rd., Guishan Dist, Taoyuan City 333001,Taiwan Cet appareil est conforme la directive 2014/53/UE mise par la Commission de la Communaut europenne. L'article (a) L'article (b) DW551DR4-1 User Manual 4 Safety Precautions CAUTION Do not install near flammable material or any heat sources. Do not defeat the safety purpose of the grounding-type plug. Do not disassemble the display to avoid electrical shock or burn. Normal operating condition considers installation at an altitude below 2000m;
some abnormalities may be experienced when installed at an altitude above 2000m. WARNING Please power off the LCD and the video source before plugging in the DP or HDMI cable. Please installed the display in well-ventilated place, do not install in a confined space. Suitable for mounting on concrete or other non-combustible surface only. If it gives off smoke, strange smell, or unusual noise, or when it gets too hot to touch, immediately unplug the display and contact the dealer. Clean only with soft, dry cloth but not use chemical liquids, and unplug while cleaning. Do not use extreme force or any sharp or pointed objects to touch the display. Do not drop or allow any object to fall to the display. Do not operate the display with wet hands to avoid electric shock. Do not discard this product with general household waste. Please be sure to comply with the local waste regulations. This device uses, generates and radiated radio frequency energy. The radio frequency energy produced by this device is well below the maximum exposure allows by Federal Communications Commission (FCC). When a stationary or fixed image is displayed on the screen for a long time, the image may be permanently imprinted on the screen. This phenomenon is known as image burn-in and is not covered by the manufacturer's warranty. In order to avoid burn-in, avoid prolonged display of static or fixed images on the screen. Power supply cord must not be attached to the building surface, nor run through walls, ceilings, floors and similar openings in the building structure. Power cord shall be connected to a socket-outlet with earthing connection. DW551DR4-1 User Manual 5 Prcautions relatives la scurit PR CAUTIONS N'installez pas installer proximit de matriaux inflammables ou de sources de chaleur. Ne pas compromettre la scurit de la fiche de mise la terre. Pour viter tout choc lectrique ou la brlure, ne dmontez pas l'cran. Le produit peut normalement tre utilis une altitude infrieure 2000 m. Des anomalies peuvent survenir lors de linstallation de lappareil une altitude suprieure 2000 m. AVERTISSEMENT Veuillez teindre l'cran LCD et la source vido avant de brancher le cble DP ou HDMI. Veuillez installer l'cran dans un endroit bien ventil, pas dans un espace confin. Convient pour le montage sur du bton ou autre surface non combustible uniquement. S'il dgage de la fume, une odeur trange ou un bruit inhabituel, ou s'il est trop chaud au toucher, dbranchez immdiatement l'cran et contactez le revendeur. Nettoyez uniquement avec un chiffon doux et sec, sans utiliser de produits chimiques, et dbranchez-le pendant le nettoyage. N'exercez pas une force excessive et nutilisez pas d'objets tranchants ou pointus pour toucher l'cran. Ne laissez pas tomber lcran et ne laissez aucun objet tomber dessus. Afin dviter tout choc lectrique, n'utilisez pas l'cran avec les mains mouilles. Ne jetez pas ce produit avec les dchets mnagers. Assurez-vous de respecter les rglementations locales en matire de dchets. Cet appareil utilise, gnre et rayonne de lnergie radiofrquence. L'nergie de radiofrquence produite par cet appareil est bien infrieure l'exposition maximale autorise par la FCC (Federal Communications Commission). Lorsqu'une image immobile ou fixe est affiche sur l'cran pendant une longue priode, l'image peut tre imprime de manire permanente sur l'cran. Ce phnomne est connu sous le nom d'image rmanente et n'est pas couvert par la garantie du fabricant. Afin d'viter toute dtrioration, vitez l'affichage prolong d'images statiques ou fixes sur l'cran. Le cordon d'alimentation ne doit pas tre connect la surface du btiment, ni traverser les murs, les plafonds, les planchers et les ouvertures similaires du btiment. Le cordon d'alimentation doit tre connect une prise lectrique mise la terre DW551DR4-1 User Manual 6 Important Safety Information Disassembling the LCD is strictly prohibited. Opening the cover may expose the user to electric shock or other hazards. Please contact DynaScan certified service professionals for all maintenance requirements. Do not allow any liquid to enter the LCD. Also avoid placing the LCD close to water sources. Do not place heavy objects on the power cord. A damaged power cord might cause electric shock or fire. Do not bend, twist, or damage the power cord. The power cord must comply with the local safety regulations. Do not damage or modify the prongs/pins and the ground contact on the power cord plug. Do not place the LCD on an unleveled surface or an unstable vehicle. The LCD could fall over and cause substantial damage. Do not cover the vents and/or the heat sink. Do not install the LCD beside radiators or other heat sources. The installation site should have sufficient ventilation so the heat generated by the LCD can be dissipated. Do not use the Signage in a hot, humid, dusty, or fumy environment. Handle the LCD with care. Save the packaging materials for transport later. Clean the LCD backside at least once a month for dust and other particles. Unplug the LCD immediately and contact a DynaScan certified service professional as soon as possible when any of the following situations occurs:
Damaged power cord or power plug. If liquid or foreign object has entered the LCD. If the LCD has been exposed to rain or water. If the LCD has been dropped or the casing has become damaged. If any structural damage such as cracks or unnatural vibration is found. If the LCD cannot be operated following the steps outlined in this manual. If the LCD emits smoke or other odors, or generates strange noises. Operating Suggestions Avoid displaying a stationary image for a long period of time in order to prevent image sticking. Cleaning the Panel Use a soft, lint-free cloth to gently wipe the dust off from the screen panel. Do not use any hard material to wipe the panel. Do not poke the panel with your hand or any sharp object (such as a pen or a nail) or exert excessive pressure on the panel to prevent any damage. Do not use any cleaning solutions on the panel as it might cause discoloration. Cleaning the Casing Gently wipe the casing with a soft cloth. Unplug the power cord. Attention Do not use any of the following solutions to clean the casing as they may damage the paint and cause it to crack or peel: benzene solution, alkaline solution, alcohol-based cleaning solution, glass cleaner, wax, polisher, or detergent. DW551DR4-1 User Manual 7 Informations importantes relatives la scurit Le dmontage de l'cran LCD est strictement interdit. L'ouverture du capot peut exposer l'utilisateur un choc lectrique ou d'autres dangers. Veuillez contacter des professionnels de service certifis DynaScan pour tous les besoins de maintenance. Ne laissez aucun liquide pntrer dans l'cran LCD. vitez galement de placer lcran LCD proximit de sources deau. Ne placez aucun objet lourd sur le cordon d'alimentation. Un cordon d'alimentation endommag peut provoquer un choc lectrique ou un incendie. Ne pliez pas, ne tordez pas et n'endommagez pas le cordon d'alimentation. Le cordon d'alimentation doit tre conforme aux rglementations locales de scurit. Veillez ne pas endommager ni modifier les broches ou le contact de terre sur la fiche du cordon d'alimentation. Ne placez pas l'cran LCD sur une surface qui nest pas de niveau ou sur un vhicule instable. Lcran LCD pourrait tomber et causer des dgts importants. Ne couvrez pas les orifices de ventilation et / ou le dissipateur de chaleur. N'installez pas l'cran LCD ct de radiateurs ou d'autres sources de chaleur. Le site d'installation doit disposer d'une ventilation suffisante pour que la chaleur gnre par l'cran LCD puisse tre dissipe. N'utilisez pas l'affichage signaltique dans un environnement chaud, humide, poussireux ou enfum. Manipulez lcran LCD avec soin. Conservez les matriaux d'emballage pour tout transport ultrieur. Nettoyez larrire de lcran LCD au moins une fois par mois afin dliminer la poussire et autres particules. Dbranchez immdiatement l'cran LCD et contactez un rparateur professionnel certifi DynaScan ds que possible lorsque l'une des situations suivantes se produit :
Cordon d'alimentation ou fiche d'alimentation endommag. Si du liquide ou un corps tranger est entr dans l'cran LCD. Si lcran LCD a t expos la pluie ou l'eau. Si lcran LCD est tomb ou si le botier a t endommag. Si vous constatez des dommages structurels comme des fissures ou des vibrations non naturelles. Si lcran LCD ne peut pas tre utilis en suivant les tapes dcrites dans le prsent manuel. Si l'cran LCD met de la fume ou d'autres odeurs, ou gnre des bruits tranges. Suggestions dutilisation vitez d'afficher une image immobile pendant une priode prolonge afin d'viter que la rmanence dimage. Nettoyage du panneau Utilisez un chiffon doux non pelucheux pour essuyer dlicatement la poussire du panneau de l'cran. N'utilisez aucun matriau dur pour essuyer le panneau. Afin dviter tout dommage, nappuyez pas sur le panneau avec votre main ou un objet pointu
(comme un stylo ou un ongle) et n'exercez pas de pression excessive sur le panneau. N'utilisez aucune solution de nettoyage sur le panneau car cela pourrait provoquer une dcoloration. Danger de stabilit ou libell quivalent;
Le moniteur peut tomber, entranant des blessures graves ou mortelles ou texte quivalent;
Le texte suivant ou quivalent:
Pour viter les blessures, ce moniteur doit tre solidement fix au sol / mur conformment aux instructions d'installation. DW551DR4-1 User Manual 8 Getting Started Contents Confirm that the accessories below are shipped along with the display. If any item is missing, please contact your dealer. The color and shape of the accessories may vary with the products. DW551DR4-1 Professional LCD. Remote Control x 1 pc. Batteries (1.5V / AAA) x2 pcs. Power cable x1 pc. Quick Start Guide x1 pc. ESK302 x2 pcs. Attention: Please use the following table to check whether the included power cord is suitable for your region. If the power cord does not match your region, please contact your local supplier. Please use matching AC socket in order to meet your local safety regulations. Plug Type North America European Continental Japan Taiwan Plug Shape Region U.S.A. / Canada 120V EU
(Except U.K.) 230V Japan 100V Taiwan 110V NEMA 5-15 CEE 7/7 NEMA 1-15 NEMA 5-15 IEC320 C13 Voltage NEMA TYPE IEC Display Plug IEC Plug TYPE Installing and Replacing Remote Control Batteries 1. Open the battery compartment cover. 2. 3. Close the battery compartment cover. Insert 2 new AAA batteries. Warning:
Incorrect usage of batteries may cause leakage or explosion. Pay attention to the polarity when installing the batteries. Do not mix different types of batteries or new and used batteries. Doing so may shorten the battery life or cause leakage. Remove or replace the batteries when they are empty in order to prevent acid leaking in the battery compartment. Do not touch the leaked substance from the batteries in case of a battery leakage. Doing so may hurt human skin. Note: If the remote control is not going to be used for a long time, we recommend removing the batteries from the remote control. DW551DR4-1 User Manual 9 Bien dbuter Contenu Vrifiez que les accessoires ci-dessous sont fournis avec lcran. Si l'un d'eux est manquant, veuillez contacter immdiatement votre revendeur. La couleur et la forme des accessoires peuvent varier selon les produits. cran LCD DW651LR5 Professional. Tlcommande x 1 Piles (1,5V / AAA) x 2 Cble d'alimentation x 1 Guide de dmarrage rapide x 1 ESK302 x 2 Attention : Veuillez utiliser le tableau suivant afin de vrifier que le cordon dalimentation fourni est adapt votre rgion. Si le cordon d'alimentation ne correspond pas votre rgion, veuillez contacter votre fournisseur local. Veuillez utiliser la prise secteur correspondante afin de respecter les rglementations locales de scurit. Type de fiche Amrique du Nord Europe continentale Japon Tawan Forme de la fiche Rgion Tension TYPE NEMA Fiche daffichage CEI TYPE fiche CEI tats-Unis /
Canada 120V NEMA 5-15 UE
(Hors R.-U.) 230V CEE 7/7 Japon 100V Tawan 110V NEMA 1-15 NEMA 5-15 IEC320 C13 Mise en place et remplacement des piles de la tlcommande 1. Ouvrez le couvercle du logement piles. 2. 3. Fermez le couvercle du logement piles. Insrez 2 nouvelles piles AAA. Avertissement :
Une mauvaise utilisation des piles peut provoquer des fuites ou une explosion. Faites attention la polarit lors de l'installation des piles. Ne mlangez pas diffrents types de piles ou des piles neuves et usages. Cela pourrait raccourcir la dure de vie des piles ou causer des fuites. Retirez ou remplacez les piles lorsqu'elles sont vides afin d'viter toute fuite d'acide dans le logement piles. Ne touchez pas la substance qui scoule des piles en cas de fuite. Cela pourrait blesser la peau. Remarque : Si la tlcommande ne doit pas tre utilise pendant une priode prolonge, nous vous recommandons den retirer les piles. DW551DR4-1 User Manual 10 Installation The LCD has been designed with two ways installation, which suitable for (1) Stand and (2) Ceiling Mount applications. Please note that the display must be properly installed onto the stand (DynaScan optional kit) or well-connected with the hanging kit (DynaScan optional kit), details please refer to the display installation guide. Incorrect installation may cause injury or damage the equipment. Product warranty does not cover the damage caused by improper installation and DynaScan shall not be held responsible in such incident. If you attempt to install the LCD on a different way, such as hanging from the ceiling with your customized hanging kit or your own platform/ enclosure; please contact DynaScan directly for more assistance. Please follow the local regulations for safety handling and display installation, this equipment is intended to be installed by qualified service personnel.
(1) Stand Model Screw Location Screw Specification Screw Length Number DW551DR4-1 A B 31.4 * 1088.9 31.4 * 1148.9 31.4 * 1208.9 31.4 * 63.9 31.4 * 123.9 31.4 * 183.9 M6 7mm is required 12 A B DW551DR4-1 User Manual 11 1. Two mounting holes can be found from top and bottom sides of the display (Portrait mode), which are reserved for wall, ceiling or stand mounting use. 2. When the connection kit insert into the mounting hole, each length side of the display has six screw holes which can be used for fasten. Orientation DW551DR4-1 provides 3 different screen orientations for various environment applications. Portrait Flip, Portrait and Landscape mode can be distinguished by the corresponding position of I/O port in the figures below. Mode 1 : Portrait Flip Mode 2 : Portrait Mode 3 : Landscape DW551DR4-1 User Manual 12 Installation Location Do not install in a location with strong vibrations or dusty. Do not install near the buildings main electric panel. Ensure the LCD is secured in such a manner that it cannot be easily removed by the general public. Leave clearance around the outer edge of the LCD from other objects to ensure proper ventilation. Single display Maintenance Inspect the fasteners regularly for signs of loosening or deformation. Please perform appropriate corrective measures when a problem is identified. Neglecting the problem may worsen the situation. Increase the inspection frequency on areas where previous maintenance had occurred to ensure the problems do not occur again. DW551DR4-1 User Manual 13 Connecting to a Power Source Using the power cable provided, plug it in the power inlet which shown in the diagram below. Connect the power cable to a 100-240 volt, 50 / 60Hz AC power outlet. Insert the plug completely into the socket. A loose power connection may cause damage to the display and/or lead to a fire hazard. Connecting an External Video Source Turn OFF the power of both LCD and external video device. Using the DP cable (or HDMI cable, DVI cable), insert one end into the DP-IN (or HDMI-IN, DVI-IN) which shown in the diagram below. Connect the other end of the DP cable (or HDMI cable, DVI cable) to the DP output (or HDMI output, DVI output) of the video source. Refer to your video devices manual for additional information. DW551DR4-1 User Manual 14 Input / Output Terminals A. AC (IN): Connect the supplied power cord to the wall outlet. B. Power Switch: Press to switch the main power on/off. C. Audio (OUT): Connect the audio signal output from Audio IN jack to an external AV device. D. RJ-45 1 (IN): RJ45 network input connection. E. HDMI 1 (IN): Connect the HDMI output of a PC or an AV device via a HDMI cable. F. RS-232 (IN): RS232C network input connection for remote control from PC. G. USB 2.0 port 1: Support for USB flash drive storage, mouse and keyboard. H. Extension Connector: Extension Connector for optional IR Extension sensor kit (ESK302). I. Thermal: Extension Connector for optional Extension thermal kit (ETK203).
*USB 2.0 port: A standardized port to connect a variety of devices like mouse, keyboard, I H G F E D C B A C D E G H I DW551DR4-1 User Manual 15 Operating Instructions Powering On/Off the Display To turn on/off the display. Press the power switch on as shown in the diagram below. ON OFF NOTE: The remote control only works when the power switch is ON. DW551DR4-1 User Manual 16 Using the Remote Control Connection using an External Sensor Kit (ESK302) Connect the ESK302 cable to the mini USB port, and aim the remote at the IR receiver as shown below. Sensor Kit The operating range of the remote control is 2.5 meters (8 feet). NOTE: Ambient light may affect the performance of the remote control. Avoid fluorescent or neon lights in the vicinity. DW551DR4-1 User Manual 17
*Color and shape may vary by model. ITEM DESCRIPTION POWER MENU UP LEFT RIGHT DOWN OK BACK Power On / Off OSD On / Off Move the cursor up or change the setting of selected item. Exit the current selection. Select the highlighted item. Move the cursor down or change the setting of selected item. Enter (for DSM365 only) Return to the last page. (for DSM365 only) DW551DR4-1 User Manual 18 Navigating the On Screen Display (OSD) Menu Press the MENU button on the remote control to show the OSD. Use the navigation arrows to select and adjust the menu items.
*The change of each setting can only enable when you press LEFT (refer to p.18) to back to the last menu layer. 1. Input Source ITEM 1 ITEM 2 DEFAULT DESCRIPTION Input Source Main Failover 1 Failover 2 Command Detection HDMI SDM DSM365 Off Set the Main input to display. Set the Failover 1 input to display. Set the Failover 2 input to display. Only effective in Main input source. If the display didnt get both of commend and the input signal, it will change to Failover1 input. 2. Picture ITEM 1 ITEM 2 DEFAULT DESCRIPTION Picture Color Temperature USER 2 Select the color temperature. (User2, User1, D93, D65 and D55). DW551DR4-1 User Manual 19 Red Green Blue Contrast Gamma 50 Native Black Level Limited Adjust the red light level. Range 0 100. Note: The feature is only supported on User2 mode. Adjust the green light level. Range 0 100. Note: The feature is only supported on User2 mode. Adjust the blue light level. Range 0 100. Note: The feature is only supported on User2 mode. Adjust the contrast level. Range 0 100. Adjusts the Gamma value. (Native, 2.2, 2.4 and sGamma) Selects the black level to adjust the screen gray scale. "Limited" for video source uses 16 to 235 levels for R/G/B, such as HDMI.
"RGB Full" for video source uses all levels from 0 to 255 levels.
"Auto" is for detecting the video source to determine its value is applicable for
"Limited" or "RGB Full". 3. Brightness ITEM 1 ITEM 2 DEFAULT DESCRIPTION Backlight Auto Brightness Off A. If the AUTO BRIGHTNESS is Off, the screen brightness will remain at HIGH LEVEL brightness value. B. If the AUTO BRIGHTNESS is Auto, the brightness of display will be adjusted according to the ambient light. When ambient light is bright, the screen will adjust to the High Level brightness value set; when ambient light is dark, the screen will adjust to the Low Level brightness value set. C. When the Timer (High Level Time &
Low Level Time) mode is set, the display will automatically switch the brightness according to the time set. D. When setting Mix mode, Timer and Light sensor will work at this mode. For example, setting "High Level Time =
DW551DR4-1 User Manual 20 8:00am" and "Low Level Time = 6:00pm", the light sensor will detect environment brightness and then display will adjust the value of High Level during 8:00am and 6:00pm. Adjusts the highest brightness level. Range 0 100. Adjusts the lowest brightness level. Range 0 100. Set high level time. Set low level time. High Level Low Level 100 5 High Level Time Low Level Time 08:00 18:00 4. Time ITEM 1 ITEM 2 DEFAULT DESCRIPTION Time Current Date Current Time Day of Week Power Control Timer Power On Time Power Off Time Off 08:00 18:00 Set the date. Set the clock. Note: The internal clock will continue to function when the power is turned off. Set the day of week. (Monday to Sunday) Automatic power on / off schedule function. Set turn-on time. Set turn-off time. DW551DR4-1 User Manual 21 5. Advance ITEM 1 ITEM 2 DEFAULT DESCRIPTION Display Mode Auto Screen Protection Off IR Control On Power Off Mode Standby Advance Volume 100 AC Back Status Power On Reset Default Setting Off Change the Menu orientation. The Menu can be displayed in either LANDSCAPE, PORTRAIT or PORTRAIT FLIP mode. Turn on / off image burn-in protection. Set image burn-in protection interval. Range 0 100 minutes. Enable/disable the remote control for Menu. Note: When disabled, the remote control function can be enabled again from the control panel on the display or through the DynaScan Display Manager application. Standby: Background processes are still running, and remote control in normal operation. Sleep: When placed in sleep mode, background processes and remote control are not running.The display is at a minimum powerstate which helps conserve power when the device is not in use. IR/ Keypad working normally. Only [Keypad]
on the display or [Power Button] on the remote control can wake up the display. Set volume. Range 100 0. Choose to use the AC back status function. Power On: Display booting up when the power back after an outage. Standby: Display keeps soft-off status when the power back after an outage. Memory: Display will back to the last state when the power back after an outage. Restore all settings to default. Note: It does not modify CURRENT DATE, CURRENT TIME, DATE OF WEEK, TIME ZONE, POWER ON TIME and POWER OFF TIME. DW551DR4-1 User Manual 22 OSD Password Protection Off Export & Import Settings Turn On:
Create Password > Confirm Password >
Password Protection On Turn Off:
Enter Password > Password Protection Off Export or Import OSD setting Reset OSD Password hide Enter Password > Enter New Password >
Confirm New Password > Success 6. Information 1 ITEM 1 Information 1 ITEM 2 Model SN Resolution MCB Version FW Version Fan Status Thermal Kit Temp. DEFAULT DESCRIPTION DW551DR4-1 The displays model. The displays serial number. Input resolution The MCB version. The F/W version. Good: Fan under normal working conditions NG: A malfunction of the fan system. The Extension Thermal Kit (ETK203) is for ambient temperature monitoring. Some functions may not be available for all models. DW551DR4-1 User Manual 23 Specifications MODEL PANEL POWER MECHANICAL SPECS LCD Panel Size Native Resolution Brightness Contrast Ratio Response Time Viewing Angle Life Time Panel Surface Power Supply Rated Voltage Power On Mode Power Saving Mode Bezel Width (T/B/L/R) Cabinet Color Monitor Dimension (LxHxD) Monitor Weight Orientation DW551DR4-1 54.64 inches 1920 x 1080 1000 cd/m (Typ.) / 3000 cd/m (Typ.) 3,000:1 8 ms (Typ.) 178/ 178 100,000 hrs (Typ.) AR 1.5%, 2H Internal 100 - 240V, 50 / 60Hz 380W
< 1W 29.5/29.5/29.5/29.5 mm Black 1272.8 x 743.3 x 62.7 mm 43 kg Landscape / Portrait USER INTERFACE OSD Language English ENVIRONMENT I/O Ports Fuse Operation Temperature Storage Temperature Humidity HDMI RS-232 Audio USB port RJ-45 Extension Connector (Mini USB) External temp. sensor 0C ~ 45C
-20C ~ 60C 10%~80% RH Non-Condensing IN *2 IN *1 OUT *1 IN *2 IN *1 IN *1 (ESK only) IN *1 (ETK only) 5A Design and specifications are subject to change without notice. DW551DR4-1 User Manual 24 Input Mode Active Resolution H Pixels V Lines Refresh Rate 640 720 800 960 1024 1280 1280 1280 1280 1366 1400 1440 1600 1680 1920 1920 480 480 600 600 768 720 768 960 1024 768 1050 900 1200 1050 720 1080 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz DW551DR4-1 User Manual 25 Pin Assignments RS-232 Input PIN No. NAME 01 02 03 04 05 06 07 08 09 Connected to 7&8 TXD RXD Connected to 6 GND Connected to 4 Connected to 1&8 Connected to 1&7 NC DW551DR4-1 User Manual 26 Troubleshooting ISSUE RECOMMENDED SOLUTION No image is displayed. Nothing happens when switching the main switch on. Check whether the cable is completely plugged in. Check whether the main switch is in the ON position, and the power cord is completely plugged in. Check whether the image sources resolution is set as the supported format (refer to section Input Mode, p.26). Check whether the cable is damaged or bent excessively. Unplug the power cord from the socket and plug it in again after a few seconds to reset the Signage. Note: Unplugging the power cord will not change the settings. Image is unstable. Check whether the cable is completely plugged in. The remote control does not work. Auto on/off does not work or does not function properly. Cannot control the display remotely via RS-232. Check whether there are batteries in the remote control. Check the batteries for freshness, polarity, etc. Check whether the remote is in the operation range. Bright light may interfere with the remote control. Please avoid using the remote control near special fluorescent lights or neon lights. Check whether the TIMER setting in the menu is set to OFF. Check whether the Power On Time and Power Off Time settings are set correctly. Check whether the RS-232 cable is connected properly. If you are still having trouble with your DynaScan DS Professional LCD, contact your dealer or DynaScan directly for more assistance. DW551DR4-1 User Manual 27 About DSM365 DSM365 is an internal operating system as Android, which can install the applications via USB flash drive storage, SD card or Internet. How to Switch to DSM365 Press the MENU button on either the rear panel control or remote control to show the OSD. Use the navigation arrows to select and adjust the Input Source.
[Input Source Main DSM365]
ITEM DESCRIPTION APPS Show the Installed APPS. DW551DR4-1 User Manual 28 www.dynascandisplay.com Copyright DynaScan Technology, Inc. All Rights Reserved. DW551DR4-1 User Manual 29
1 2 3 4 | User Manual module | Users Manual | 690.08 KiB | August 19 2022 / August 25 2022 |
User Manual for Android Control Board With Wireless module Product Digital Transmission System Model No FBP206 1. Applicable Products Model Description Model 55Display 65512 FBP206 User Manual 2. Feature Feature Implementation Power Supply 5.0V0.25V Temperature range Work temperature-20C+70C Storage temperature-55C+125C 3. Environmental Characteristics
(1) Temperature Operating0C+40C Storage-20C+70C
(2) Humidity Operating10% to 90% (non-condensing) Storage5% to 95% (non-condensing)
(3) Altitude Operating10,000 ft. (max) Storage20,000 ft. (max) 4. FBP206 User Manual Connector Description USB2.0 5V DM DP 5V Supply Voltage USB Data USB Data GND Ground Antenna 1 Antenna 2 Single-band 5G or dual-band antennas can be used, single-band 2.4G antennas cannot be used 5. Module Specification
(1) General Description This document is to specify the product requirements for 802.11a/b/g/n/ac USB Module. This Card is based on REALTEK RTL8812CU chipset .It is a complete dual-band(2.4GHz and 5GHz)WIFI 22 MIMO MAC/PHY/Radio System-on-a-Chip. This module provides a high level of integration with a dual-stream IEEE 802.11ac MAC/ base band/radio. The WLAN operation supports 20MHz,40MHz and 80MHz channels for data rates up to 866.7Mbps. It is also backward complied with IEEE 802.11a standard from 5.15~5.825GHz wideband and IEEE 802.11b/g standard from 2.4~2.5GHz. It can be used to provide up to 54Mbps for IEEE 802.11a and IEEE 802.11g, 11Mbps for IEEE 802.11b and 300Mbps for IEEE 802.11n. FBP206 User Manual
(2) Featires Compatible with IEEE 802.11a standard to provide wireless 54Mbps dara rate. Compatible with IEEE 802.11b standard to provide wireless 11Mbps dara rate. Compatible with IEEE 802.11g standard to provide wireless 54Mbps dara rate. Compatible with IEEE 802.11n standard to provide wireless 300Mbps dara rate. Compatible with IEEE 802.11ac standard to provide wireless 866.7Mbps dara rate. Support 20MHz, 40MHz bandwidth in 2.4GHz band Operation at 2.4G5GHz and 5.155.825GHz frequency band to meet worldwide regulations Supports MU-MIMO. Support STBC, LDPC Supports IEEE 802.11i (WPA and WPA2), WAPI. Drivers support Windows, Linux, Android High speed USB 2.0 interface RoHS compliant 6. Application Diagrams
(1) Functional Block Diag FBP206 User Manual
(2) General Requirements IEEE 802.11a Section Feature Detailed Description Radio and Modulation Type QPSKBPSK16QAM64QAM with OFDM Operating Frequency 5.15G5.25GHz 5.725G5.825GHz Data Rate at most 54Mbps Media Access Protocol CSMACA with ACK Typical RF Output Power (tolerance2dB) at each RF chain, Transmitter Output Power at Antenna Connector Data Rate and at room Temp. 25 degree C 152 dBm at 54Mbps Receiver Sensitivity at Antenna Connector Typical Sensitivity at each RF chain. Frame (1000-byte PDUs) Error Rate10% at room Temp. 25 degree C
-73 dBm at 54Mbps IEEE 802.11b Section Feature Detailed Description Radio and Modulation Schemes DQPSKDBPSKDSSSCCK Operating Frequency 2400M2483.5MHz, ISM band Channel Numbers 13 channels for Worldwide Data Rate at most 11Mbps Media Access Protocol CSMACA with ACK Typical RF Output Power (tolerance2dB) at each RF chain, Transmitter Output Power at Data Rate and at room Temp. 25 degree C Antenna Connector 162 dBm at 11Mbps Receiver Sensitivity at Antenna Connector Typical Sensitivity at Which Frame (1000-byte PDUs) Error Rate8% at room Temp. 25 degree C
-82 dBm at 11Mbps FBP206 User Manual IEEE 802.11g Section Feature Detailed Description Radio and Modulation Type QPSKBPSK16QAM64QAM with OFDM Operating Frequency 2400M2483.5MHz, ISM band Channel Numbers 13 channels for Worldwide Data Rate at most 54Mbps Media Access Protocol CSMACA with ACK Typical RF Output Power (tolerance2dB) at each RF chain, Transmitter Output Power at Data Rate and at room Temp. 25 degree C Antenna Connector 152 dBm at 54Mbps Receiver Sensitivity at Antenna Connector Typical Sensitivity at Which Frame (1000-byte PDUs) Error Rate10% at room Temp. 25 degree C
-73 dBm at 54Mbps IEEE 802.11n Section Feature Detailed Description Radio and Modulation Type QPSKBPSK16QAM64QAM with OFDM 2.4GHz 2400M2483.5MHz Operating Frequency 5.15G5.25GHz 5GHz 5.725G5.825GHz Data Rate at most 300Mbps Media Access Protocol CSMACA with ACK Transmitter Output Power at Antenna Connector Typical RF Output Power (tolerance2dB) at each RF chain, Data Rate and at room Temp. 25 degree C 2.4GHz BandHT20HT40 5GHz BandHT20HT40 152 dBm at MCS7 Receiver Sensitivity at Antenna Typical Sensitivity at each RF chain. Frame (1000-byte PDUs) Connector Error Rate10% at room Temp. 25 degree C FBP206 User Manual 2.4GHz BandHT20
-70 dBm at MCS7 2.4GHz BandHT40
-66 dBm at MCS7 5GHz BandHT20
-71 dBm at MCS7 5GHz BandHT40
-67 dBm at MCS7 IEEE 802.11ac Section Feature Detailed Description Radio and Modulation Schemes QPSKBPSK16QAM64QAM256QAMOFDM Operating Frequency 5.155.25GHz5.7255.825GHz Data Rate at most 866.7Mbps Media Access Protocol CSMACA with ACK Typical RF Output Power (tolerance2dB) at each RF chain, Data Rate and at room Temp. 25 degree C Transmitter Output Power at Antenna Connector HT20152 dBm at MCS8 HT40152 dBm at MCS9 HT80132 dBm at MCS9 Typical Sensitivity at each RF chain. Frame (1000-byte PDUs) Error Rate10% at room Temp. 25 degree C Receiver Sensitivity at Antenna Connector 5GHz BandHT20-64 dBm at MCS8 5GHz BandHT40-61 dBm at MCS9 5GHz BandHT80-58 dBm at MCS9 FCC Statement FBP206 User Manual FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. CAUTION Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. End Product Labeling The end product shall bear the following 15.19 statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This transmitter module is authorized only for use in device where the antenna may be installed such that 20cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following:
Contains FCC ID: 2AKWYFBP206 FBP206 User Manual This module is intended under the following conditions 1. This module is certified pursuant to Part 15 rules section(15.247). 2. This module is limited to host model number: 65512/ Brand: DynaScan 3. This module has been approved to operate with the antenna types listed below, with the maximum permissible gain indicated. Frequency Band Antenna Type Gain(dBi) 2400-2500MHz 5150-5850MHz PIFA PIFA
-3.04
-2.31 Information on test modes and additional testing requirements This module is restricted to integration into hosts for indoor use only. Be limited the operation channels in channel 1-11 for 2.4GHz band. The separate approval is required for all other operating configurations, including portable configurations with respect to Part 2.1093 and different antenna configurations. The information on how to configure test modes for host product evaluation for different operational conditions for a stand-alone modular transmitter in a host, versus with multiple, simultaneously transmitting modules or other transmitters in a host can be found at KDB Publication 996369 D04. Additional testing, Part 15 Subpart B disclaimer Appropriate measurements (e.g. 15B compliance) and if applicable additional equipment authorizations (e.g. SDoC) of the host product to be addressed by the integrator/manufacturer. This module is only FCC authorized for the specific rule part 15.247 listed on the grant, and the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host product as being Part 15 Subpart B compliant. The user manual of the end product should include This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. FBP206 User Manual Name: DynaScan Technology, Inc. Address: 7 Chrysler, Irvine, CA 92618, USA Office: +1 949.421.0348 https://www.dynascandisplay.com
1 2 3 4 | Users Manual | Users Manual | 2.05 MiB | November 16 2023 / November 17 2023 |
DW551DR4-1 USER MANUAL 55 Dual-Sided High Brightness Display 65514 | V2.03 Contents Material Contents Declaration ................................................................................................................ 2 Recycling and Energy Information ......................................................................................................... 2 Declaration of Conformity ....................................................................................................................... 3 Dclaration de conformit....................................................................................................................... 4 Safety Precautions ................................................................................................................................. 5 Prcautions relatives la scurit .......................................................................................................... 6 Important Safety Information .................................................................................................................. 7 Informations importantes relatives la scurit ..................................................................................... 8 Getting Started ....................................................................................................................................... 9 Contents ............................................................................................................................................. 9 Installing and Replacing Remote Control Batteries ............................................................................ 9 Bien dbuter ......................................................................................................................................... 10 Contenu ............................................................................................................................................ 10 Mise en place et remplacement des piles de la tlcommande....................................................... 10 Installation............................................................................................................................................. 11 Connecting to a Power Source ......................................................................................................... 14 Connecting an External Video Source ............................................................................................. 14 Input / Output Terminals ................................................................................................................... 15 Operating Instructions .......................................................................................................................... 15 Powering On/Off the Display ............................................................................................................ 16 Using the Remote Control ................................................................................................................ 17 Navigating the On Screen Display (OSD) Menu .................................................................................. 19 Specifications ....................................................................................................................................... 25 Input Mode ............................................................................................................................................ 26 Pin Assignments ................................................................................................................................... 27 RS-232 Input .................................................................................................................................... 27 Troubleshooting .................................................................................................................................... 28 About DSM365 ..................................................................................................................................... 29 1 Material Contents Declaration Part Name Lead Mercury Cadmium Hazardous Substances Hexavalent Chromium Cr6+
O O O O Polybrominated Biphenyls PBB O O O O Polybromodiphenyl Ethers PBDE O O O O PCBA CHASSIS ACCESSORY PACKAGE O indicates that the level of the specified chemical substance is less than the threshold level specified in the standards of SJ/T-11363-2006 and EU 2011/65/EC. indicates that the level of the specified chemical substance exceeds the threshold level specified in the standards of SJ/T-11363-2006 and EU 2011/65/EC. Pb O O O O Hg O O O O Cd O O O O Recycling and Energy Information DynaScan is firmly committed to its environmental protection efforts and we believe that reducing our products impact on the environment is of the utmost importance. We are dedicated to meet the latest environmental protection regulations. Energy usage Mode Normal Standby Energy Consumption Max. 380W
< 1W Disposal Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being. When replacing old appliances with new one, the retailer is legally obligated to take back your old appliances for disposal at least for free of charge. DW551DR4-1 User Manual 2 Declaration of Conformity FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF exposure warning To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. Manufacturer Name DynaScan Technology Corp. Manufacturer Address 6F, No. 88 Wenmao Rd., Guishan Dist, Taoyuan City 333001,Taiwan This device complies with Directive 2014/53/EU issued by the Commission of the European Community. Article 3.1(a) IEC 62368-1:2018 IEC 62368-1:2014 EN 62368-1:2017+A11:2017 Article 3.2 ETSI EN 300 328 v2.2.2 ETSI EN 301 893 v2.1.1 EN IEC 62311 (2020) Article 3.1 EN 55032:2015+A1:2020 EN IEC 61000-3-2:2019+A1:2021 EN 61000-3-3:2013+A1:2019 EN 55035:2017+A11:2020 EN 301 489-1 v2.2.3 EN 301 489-17 v3.2.4 DW551DR4-1 User Manual 3 Dclaration de conformit FCC Cet appareil est conforme la section 15 de la rglementation FCC. Son utilisation est sujette aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interfrence nuisible, et (2) cet appareil doit accepter toute interfrence reue, y compris celles qui peuvent causer un fonctionnement non souhait. Avertissement d'exposition RF Pour se conformer aux exigences de conformit d'exposition RF de la FCC, une distance de sparation d'au moins 20 cm doit tre maintenue entre l'antenne de cet appareil et toutes les personnes. Cet metteur ne doit pas tre co-localis ou fonctionner en conjonction avec une autre antenne ou metteur D CLARATION DE LA COMMISSION F D RALE DES COMMUNICATIONS Cet quipement a t test et dclar conforme aux limites d'un appareil numrique de classe A, conformment la partie 15 des rgles FCC. Ces limites sont conues pour fournir une protection raisonnable contre les interfrences nuisibles lorsque l'quipement est utilis dans un environnement commercial. Ce l'quipement gnre, utilise et peut mettre de l'nergie radiofrquence et, s'il n'est pas install et utilis conformment au manuel d'instructions, peut provoquer des interfrences nuisibles aux communications radio. Le fonctionnement de cet quipement dans une zone rsidentielle est susceptible de provoquer des interfrences nuisibles, auquel cas l'utilisateur devra corriger les interfrences ses propres frais. ATTENTION :
Tout changement ou modification, non expressment approuv par le responsable de la conformit, peut rvoquer lautorit de l'utilisateur employer l'appareil en question. Nom du fabricant DynaScan Technology Corp. Adresse du fabricant 6F, No. 88 Wenmao Rd., Guishan Dist, Taoyuan City 333001,Taiwan Cet appareil est conforme la directive 2014/53/UE mise par la Commission de la Communaut europenne. L'article 3.1(a) IEC 62368-1:2018 IEC 62368-1:2014 EN 62368-1:2017+A11:2017 L'article 3.2 ETSI EN 300 328 v2.2.2 ETSI EN 301 893 v2.1.1 EN IEC 62311 (2020) L'article 3.1 EN 55032:2015+A1:2020 EN IEC 61000-3-2:2019+A1:2021 EN 61000-3-3:2013+A1:2019 EN 55035:2017+A11:2020 EN 301 489-1 v2.2.3 EN 301 489-17 v3.2.4 DW551DR4-1 User Manual 4 Safety Precautions CAUTION Do not install near flammable material or any heat sources. Do not defeat the safety purpose of the grounding-type plug. Do not disassemble the display to avoid electrical shock or burn. Normal operating condition considers installation at an altitude below 2000m;
some abnormalities may be experienced when installed at an altitude above 2000m. WARNING Please power off the LCD and the video source before plugging in the DP or HDMI cable. Please installed the display in well-ventilated place, do not install in a confined space. Suitable for mounting on concrete or other non-combustible surface only. If it gives off smoke, strange smell, or unusual noise, or when it gets too hot to touch, immediately unplug the display and contact the dealer. Clean only with soft, dry cloth but not use chemical liquids, and unplug while cleaning. Do not use extreme force or any sharp or pointed objects to touch the display. Do not drop or allow any object to fall to the display. Do not operate the display with wet hands to avoid electric shock. Do not discard this product with general household waste. Please be sure to comply with the local waste regulations. This device uses, generates and radiated radio frequency energy. The radio frequency energy produced by this device is well below the maximum exposure allows by Federal Communications Commission (FCC). When a stationary or fixed image is displayed on the screen for a long time, the image may be permanently imprinted on the screen. This phenomenon is known as image burn-in and is not covered by the manufacturer's warranty. In order to avoid burn-in, avoid prolonged display of static or fixed images on the screen. Power supply cord must not be attached to the building surface, nor run through walls, ceilings, floors and similar openings in the building structure. Power cord shall be connected to a socket-outlet with earthing connection. DW551DR4-1 User Manual 5 Prcautions relatives la scurit PR CAUTIONS N'installez pas installer proximit de matriaux inflammables ou de sources de chaleur. Ne pas compromettre la scurit de la fiche de mise la terre. Pour viter tout choc lectrique ou la brlure, ne dmontez pas l'cran. Le produit peut normalement tre utilis une altitude infrieure 2000 m. Des anomalies peuvent survenir lors de linstallation de lappareil une altitude suprieure 2000 m. AVERTISSEMENT Veuillez teindre l'cran LCD et la source vido avant de brancher le cble DP ou HDMI. Veuillez installer l'cran dans un endroit bien ventil, pas dans un espace confin. Convient pour le montage sur du bton ou autre surface non combustible uniquement. S'il dgage de la fume, une odeur trange ou un bruit inhabituel, ou s'il est trop chaud au toucher, dbranchez immdiatement l'cran et contactez le revendeur. Nettoyez uniquement avec un chiffon doux et sec, sans utiliser de produits chimiques, et dbranchez-le pendant le nettoyage. N'exercez pas une force excessive et nutilisez pas d'objets tranchants ou pointus pour toucher l'cran. Ne laissez pas tomber lcran et ne laissez aucun objet tomber dessus. Afin dviter tout choc lectrique, n'utilisez pas l'cran avec les mains mouilles. Ne jetez pas ce produit avec les dchets mnagers. Assurez-vous de respecter les rglementations locales en matire de dchets. Cet appareil utilise, gnre et rayonne de lnergie radiofrquence. L'nergie de radiofrquence produite par cet appareil est bien infrieure l'exposition maximale autorise par la FCC (Federal Communications Commission). Lorsqu'une image immobile ou fixe est affiche sur l'cran pendant une longue priode, l'image peut tre imprime de manire permanente sur l'cran. Ce phnomne est connu sous le nom d'image rmanente et n'est pas couvert par la garantie du fabricant. Afin d'viter toute dtrioration, vitez l'affichage prolong d'images statiques ou fixes sur l'cran. Le cordon d'alimentation ne doit pas tre connect la surface du btiment, ni traverser les murs, les plafonds, les planchers et les ouvertures similaires du btiment. Le cordon d'alimentation doit tre connect une prise lectrique mise la terre DW551DR4-1 User Manual 6 Important Safety Information Disassembling the LCD is strictly prohibited. Opening the cover may expose the user to electric shock or other hazards. Please contact DynaScan certified service professionals for all maintenance requirements. Do not allow any liquid to enter the LCD. Also avoid placing the LCD close to water sources. Do not place heavy objects on the power cord. A damaged power cord might cause electric shock or fire. Do not bend, twist, or damage the power cord. The power cord must comply with the local safety regulations. Do not damage or modify the prongs/pins and the ground contact on the power cord plug. Do not place the LCD on an unleveled surface or an unstable vehicle. The LCD could fall over and cause substantial damage. Do not cover the vents and/or the heat sink. Do not install the LCD beside radiators or other heat sources. The installation site should have sufficient ventilation so the heat generated by the LCD can be dissipated. Do not use the Signage in a hot, humid, dusty, or fumy environment. Handle the LCD with care. Save the packaging materials for transport later. Clean the LCD backside at least once a month for dust and other particles. Unplug the LCD immediately and contact a DynaScan certified service professional as soon as possible when any of the following situations occurs:
Damaged power cord or power plug. If liquid or foreign object has entered the LCD. If the LCD has been exposed to rain or water. If the LCD has been dropped or the casing has become damaged. If any structural damage such as cracks or unnatural vibration is found. If the LCD cannot be operated following the steps outlined in this manual. If the LCD emits smoke or other odors, or generates strange noises. Operating Suggestions Avoid displaying a stationary image for a long period of time in order to prevent image sticking. Cleaning the Panel Use a soft, lint-free cloth to gently wipe the dust off from the screen panel. Do not use any hard material to wipe the panel. Do not poke the panel with your hand or any sharp object (such as a pen or a nail) or exert excessive pressure on the panel to prevent any damage. Do not use any cleaning solutions on the panel as it might cause discoloration. Cleaning the Casing Gently wipe the casing with a soft cloth. Unplug the power cord. Attention Do not use any of the following solutions to clean the casing as they may damage the paint and cause it to crack or peel: benzene solution, alkaline solution, alcohol-based cleaning solution, glass cleaner, wax, polisher, or detergent. Stability Hazard or equivalent wording;
The monitor set may fall, causing serious personal injury or death or equivalent text;
The following or equivalent text:
To prevent injury, this monitor set must be securely attached to the floor/wall in accordance with the installation instructions. DW551DR4-1 User Manual 7 Informations importantes relatives la scurit Le dmontage de l'cran LCD est strictement interdit. L'ouverture du capot peut exposer l'utilisateur un choc lectrique ou d'autres dangers. Veuillez contacter des professionnels de service certifis DynaScan pour tous les besoins de maintenance. Ne laissez aucun liquide pntrer dans l'cran LCD. vitez galement de placer lcran LCD proximit de sources deau. Ne placez aucun objet lourd sur le cordon d'alimentation. Un cordon d'alimentation endommag peut provoquer un choc lectrique ou un incendie. Ne pliez pas, ne tordez pas et n'endommagez pas le cordon d'alimentation. Le cordon d'alimentation doit tre conforme aux rglementations locales de scurit. Veillez ne pas endommager ni modifier les broches ou le contact de terre sur la fiche du cordon d'alimentation. Ne placez pas l'cran LCD sur une surface qui nest pas de niveau ou sur un vhicule instable. Lcran LCD pourrait tomber et causer des dgts importants. Ne couvrez pas les orifices de ventilation et / ou le dissipateur de chaleur. N'installez pas l'cran LCD ct de radiateurs ou d'autres sources de chaleur. Le site d'installation doit disposer d'une ventilation suffisante pour que la chaleur gnre par l'cran LCD puisse tre dissipe. N'utilisez pas l'affichage signaltique dans un environnement chaud, humide, poussireux ou enfum. Manipulez lcran LCD avec soin. Conservez les matriaux d'emballage pour tout transport ultrieur. Nettoyez larrire de lcran LCD au moins une fois par mois afin dliminer la poussire et autres particules. Dbranchez immdiatement l'cran LCD et contactez un rparateur professionnel certifi DynaScan ds que possible lorsque l'une des situations suivantes se produit :
Cordon d'alimentation ou fiche d'alimentation endommag. Si du liquide ou un corps tranger est entr dans l'cran LCD. Si lcran LCD a t expos la pluie ou l'eau. Si lcran LCD est tomb ou si le botier a t endommag. Si vous constatez des dommages structurels comme des fissures ou des vibrations non naturelles. Si lcran LCD ne peut pas tre utilis en suivant les tapes dcrites dans le prsent manuel. Si l'cran LCD met de la fume ou d'autres odeurs, ou gnre des bruits tranges. Suggestions dutilisation vitez d'afficher une image immobile pendant une priode prolonge afin d'viter que la rmanence dimage. Nettoyage du panneau Utilisez un chiffon doux non pelucheux pour essuyer dlicatement la poussire du panneau de l'cran. N'utilisez aucun matriau dur pour essuyer le panneau. Afin dviter tout dommage, nappuyez pas sur le panneau avec votre main ou un objet pointu
(comme un stylo ou un ongle) et n'exercez pas de pression excessive sur le panneau. N'utilisez aucune solution de nettoyage sur le panneau car cela pourrait provoquer une dcoloration. Danger de stabilit ou libell quivalent;
Le moniteur peut tomber, entranant des blessures graves ou mortelles ou texte quivalent;
Le texte suivant ou quivalent:
Pour viter les blessures, ce moniteur doit tre solidement fix au sol / mur conformment aux instructions d'installation. DW551DR4-1 User Manual 8 Getting Started Contents Confirm that the accessories below are shipped along with the display. If any item is missing, please contact your dealer. The color and shape of the accessories may vary with the products. DW551DR4-1 Professional LCD. Remote Control x 1 pc. Batteries (1.5V / AAA) x2 pcs. Power cable x1 pc. Quick Start Guide x1 pc. ESK302 x2 pcs. Attention: Please use the following table to check whether the included power cord is suitable for your region. If the power cord does not match your region, please contact your local supplier. Please use matching AC socket in order to meet your local safety regulations. Plug Type North America European Continental Japan Taiwan Plug Shape Region U.S.A. / Canada 120V EU
(Except U.K.) 230V Japan 100V Taiwan 110V NEMA 5-15 CEE 7/7 NEMA 1-15 NEMA 5-15 IEC320 C13 Voltage NEMA TYPE IEC Display Plug IEC Plug TYPE Installing and Replacing Remote Control Batteries 1. Open the battery compartment cover. 2. 3. Close the battery compartment cover. Insert 2 new AAA batteries. Warning:
Incorrect usage of batteries may cause leakage or explosion. Pay attention to the polarity when installing the batteries. Do not mix different types of batteries or new and used batteries. Doing so may shorten the battery life or cause leakage. Remove or replace the batteries when they are empty in order to prevent acid leaking in the battery compartment. Do not touch the leaked substance from the batteries in case of a battery leakage. Doing so may hurt human skin. Note: If the remote control is not going to be used for a long time, we recommend removing the batteries from the remote control. DW551DR4-1 User Manual 9 Bien dbuter Contenu Vrifiez que les accessoires ci-dessous sont fournis avec lcran. Si l'un d'eux est manquant, veuillez contacter immdiatement votre revendeur. La couleur et la forme des accessoires peuvent varier selon les produits. cran LCD DW651LR5 Professional. Tlcommande x 1 Piles (1,5V / AAA) x 2 Cble d'alimentation x 1 Guide de dmarrage rapide x 1 ESK302 x 2 Attention : Veuillez utiliser le tableau suivant afin de vrifier que le cordon dalimentation fourni est adapt votre rgion. Si le cordon d'alimentation ne correspond pas votre rgion, veuillez contacter votre fournisseur local. Veuillez utiliser la prise secteur correspondante afin de respecter les rglementations locales de scurit. Type de fiche Amrique du Nord Europe continentale Japon Tawan Forme de la fiche Rgion Tension TYPE NEMA Fiche daffichage CEI TYPE fiche CEI tats-Unis /
Canada 120V NEMA 5-15 UE
(Hors R.-U.) 230V CEE 7/7 Japon 100V Tawan 110V NEMA 1-15 NEMA 5-15 IEC320 C13 Mise en place et remplacement des piles de la tlcommande 1. Ouvrez le couvercle du logement piles. 2. 3. Fermez le couvercle du logement piles. Insrez 2 nouvelles piles AAA. Avertissement :
Une mauvaise utilisation des piles peut provoquer des fuites ou une explosion. Faites attention la polarit lors de l'installation des piles. Ne mlangez pas diffrents types de piles ou des piles neuves et usages. Cela pourrait raccourcir la dure de vie des piles ou causer des fuites. Retirez ou remplacez les piles lorsqu'elles sont vides afin d'viter toute fuite d'acide dans le logement piles. Ne touchez pas la substance qui scoule des piles en cas de fuite. Cela pourrait blesser la peau. Remarque : Si la tlcommande ne doit pas tre utilise pendant une priode prolonge, nous vous recommandons den retirer les piles. DW551DR4-1 User Manual 10 Installation The LCD has been designed with two ways installation, which suitable for (1) Stand and (2) Ceiling Mount applications. Please note that the display must be properly installed onto the stand (DynaScan optional kit) or well-connected with the hanging kit (DynaScan optional kit), details please refer to the display installation guide. Incorrect installation may cause injury or damage the equipment. Product warranty does not cover the damage caused by improper installation and DynaScan shall not be held responsible in such incident. If you attempt to install the LCD on a different way, such as hanging from the ceiling with your customized hanging kit or your own platform/ enclosure; please contact DynaScan directly for more assistance. Please follow the local regulations for safety handling and display installation, this equipment is intended to be installed by qualified service personnel.
(1) Stand Model Screw Location Screw Specification Screw Length Number DW551DR4-1 A B 31.4 * 1088.9 31.4 * 1148.9 31.4 * 1208.9 31.4 * 63.9 31.4 * 123.9 31.4 * 183.9 M6 7mm is required 12 A B DW551DR4-1 User Manual 11 1. Two mounting holes can be found from top and bottom sides of the display (Portrait mode), which are reserved for wall, ceiling or stand mounting use. 2. When the connection kit insert into the mounting hole, each length side of the display has six screw holes which can be used for fasten. Orientation DW551DR4-1 provides 3 different screen orientations for various environment applications. Portrait Flip, Portrait and Landscape mode can be distinguished by the corresponding position of I/O port in the figures below. Mode 1 : Portrait Flip Mode 2 : Portrait Mode 3 : Landscape DW551DR4-1 User Manual 12 Installation Location Do not install in a location with strong vibrations or dusty. Do not install near the buildings main electric panel. Ensure the LCD is secured in such a manner that it cannot be easily removed by the general public. Leave clearance around the outer edge of the LCD from other objects to ensure proper ventilation. Single display Maintenance Inspect the fasteners regularly for signs of loosening or deformation. Please perform appropriate corrective measures when a problem is identified. Neglecting the problem may worsen the situation. Increase the inspection frequency on areas where previous maintenance had occurred to ensure the problems do not occur again. DW551DR4-1 User Manual 13 Connecting to a Power Source Using the power cable provided, plug it in the power inlet which shown in the diagram below. Connect the power cable to a 100-240 volt, 50 / 60Hz AC power outlet. Insert the plug completely into the socket. A loose power connection may cause damage to the display and/or lead to a fire hazard. Connecting an External Video Source Turn OFF the power of both LCD and external video device. Using the DP cable (or HDMI cable, DVI cable), insert one end into the DP-IN (or HDMI-IN, DVI-IN) which shown in the diagram below. Connect the other end of the DP cable (or HDMI cable, DVI cable) to the DP output (or HDMI output, DVI output) of the video source. Refer to your video devices manual for additional information. DW551DR4-1 User Manual 14 Input / Output Terminals A. AC (IN): Connect the supplied power cord to the wall outlet. B. Power Switch: Press to switch the main power on/off. C. Audio (OUT): Connect the audio signal output from Audio IN jack to an external AV device. D. RJ-45 1 (IN): RJ45 network input connection. E. HDMI 1 (IN): Connect the HDMI output of a PC or an AV device via a HDMI cable. F. RS-232 (IN): RS232C network input connection for remote control from PC. G. USB 2.0 port 1: Support for USB flash drive storage, mouse and keyboard. H. Extension Connector: Extension Connector for optional IR Extension sensor kit (ESK302). I. Thermal: Extension Connector for optional Extension thermal kit (ETK302).
*USB 2.0 port: A standardized port to connect a variety of devices like mouse, keyboard, I H G F E D C B A C D E G H I DW551DR4-1 User Manual 15 Operating Instructions Powering On/Off the Display To turn on/off the display. Press the power switch on as shown in the diagram below. ON OFF NOTE: The remote control only works when the power switch is ON. DW551DR4-1 User Manual 16 Using the Remote Control Connection using an External Sensor Kit (ESK302) Connect the ESK302 cable to the mini USB port, and aim the remote at the IR receiver as shown below. Sensor Kit The operating range of the remote control is 2.5 meters (8 feet). NOTE: Ambient light may affect the performance of the remote control. Avoid fluorescent or neon lights in the vicinity. DW551DR4-1 User Manual 17
*Color and shape may vary by model. ITEM DESCRIPTION POWER MENU UP LEFT RIGHT DOWN OK BACK Power On / Off OSD On / Off Move the cursor up or change the setting of selected item. Exit the current selection. Select the highlighted item. Move the cursor down or change the setting of selected item. Enter (for DSM365 only) Return to the last page. (for DSM365 only) DW551DR4-1 User Manual 18 Navigating the On Screen Display (OSD) Menu Press the MENU button on the remote control to show the OSD. Use the navigation arrows to select and adjust the menu items.
*The change of each setting can only enable when you press LEFT (refer to p.18) to back to the last menu layer. 1. Input Source ITEM 1 ITEM 2 DEFAULT DESCRIPTION Main Failover 1 Failover 2 Input Source Failback Command Detection HDMI SDM DSM365 OFF Off Set the Main input to display. Set the Failover 1 input to display. Set the Failover 2 input to display. Set the time (hour),when the Input Source is failover , it will redetection the Main Source per few hour. Only effective in Main input source. If the display didnt get both of commend and the input signal, it will change to Failover1 input. 2. Picture DW551DR4-1 User Manual 19 ITEM 1 ITEM 2 DEFAULT DESCRIPTION Color Temperature USER Red Green Blue Contrast Gamma 100 100 100 50 Native Black Level Limited Picture Adjusts the color temperature to preset or user determined values. (User, D55, D65, D93, Balanced) Adjust the red light level. Range 0 100. Note: The feature is only supported on User2 mode. Adjust the green light level. Range 0 100. Note: The feature is only supported on User2 mode. Adjust the blue light level. Range 0 100. Note: The feature is only supported on User2 mode. Adjust the contrast level. Range 0 100. Adjusts the Gamma value. (Native, 2.2, 2.4 and sGamma) Selects the black level to adjust the screen gray scale. "Limited" for video source uses 16 to 235 levels for R/G/B, such as HDMI.
"RGB Full" for video source uses all levels from 0 to 255 levels.
"Auto" is for detecting the video source to determine its value is applicable for
"Limited" or "RGB Full". 3. Brightness DW551DR4-1 User Manual 20 ITEM 1 ITEM 2 DEFAULT DESCRIPTION Brightness Setting :Fixed:screen brightness remains at one level. Timer:Screen brightness is determined by the time of day. Auto:Screen brightness is determined by an extension sensor kit (ESK). Mix:Mix Timer &
Auto Mode,Autosensor time screen brightness determined by an extension sensor kit (ESK); fixed time by timer. By Light Value:Screen brightness determined by ambient light values, up to 4 levels. By Time:Screen brightness determined by scheduled values, up to 4 levels. Auto Brightness Fixed Brightness Backlight Level 100 4. Time DW551DR4-1 User Manual 21 ITEM 1 ITEM 2 DEFAULT DESCRIPTION Region Time Zone Set Date & Time Current Time Current Date Day of Week Time 5. Schedule Set the Time Zone. Set the mode. Set the clock. Note: The internal clock will continue to function when the power is turned off. Set the date. Set the day of week. (Monday to Sunday) ITEM 1 ITEM 2 DEFAULT DESCRIPTION Schedule Power ON|OFF Time OFF Automatic power on / off schedule function. 6.Advanced DW551DR4-1 User Manual 22 ITEM 1 ITEM 2 DEFAULT DESCRIPTION Display Mode Auto Screen Protection OFF IR Control On Power Restore Behavior Power On Auto Out Volume 50 Source Info ON Advanced RS232 CMD Compatible OFF Schedule Reboot OFF OSD Password Protection OFF Export & Import Settings Reset Default Settings Change the Menu orientation. The Menu can be displayed in either LANDSCAPE or PORTRAIT mode. Turn on / off image burn-in protection. Set image burn-in protection interval. Range 0 100 minutes. Enable/disable the remote control for Menu. Note: When disabled, the remote control function can be enabled again from the control panel on the display or through the DynaScan Display Manager application. Choose to use the AC back status function. Power On: Display booting up when the power back after an outage. Standby: Display keeps soft-off status when the power back after an outage. Memory: Display will back to the last state when the Set volume. Range 100 0. Enable/disable the Video Source Information. RS232 Command compatibility between the current and last generation* model.
* last generation model: DS371BT4 DS491LT4DS552LT4-1DS552LT4-M DS552LT5DS552LT6-1DS552LT7 DS551DR4DI551ST2DW551LR5 DO552LR4DO551LR4DO552LR4-M DI651ST2DP652ST2DP652LT5 Enable/disable the Schedule Reboot, And set the Time. Turn On:
Create Password > Confirm Password >
Password Protection On Turn Off:
Enter Password > Password Protection Off Export or Import OSD Setting by USB. Restore all settings to default. Note: It does not modify CURRENT TIME, POWER ON TIME and POWER OFF TIME. DW551DR4-1 User Manual 23 7. Information ITEM 1 ITEM 2 DEFAULT DESCRIPTION Information Resolution MCB Version FW Version Fan Status Thermal Kit Temp. Input resolution The MCB version. The F/W version. Good: Fan under normal working conditions NG: A malfunction of the fan system. The Extension Thermal Kit (ETK302) is for ambient temperature monitoring. Some functions may not be available for all models. DW551DR4-1 User Manual 24 Specifications MODEL PANEL POWER MECHANICAL SPECS LCD Panel Size Native Resolution Brightness Contrast Ratio Response Time Viewing Angle Life Time Panel Surface Power Supply Rated Voltage Power On Mode Power Saving Mode Bezel Width (T/B/L/R) Cabinet Color Monitor Dimension (LxHxD) Monitor Weight Orientation DW551DR4-1 54.64 inches 1920 x 1080 1000 cd/m (Typ.) / 3000 cd/m (Typ.) 3,000:1 8 ms (Typ.) 178/ 178 100,000 hrs (Typ.) AR 1.5%, 2H Internal 100 - 240V, 50 / 60Hz 380W
< 1W 29.5/29.5/29.5/29.5 mm Black 1272.8 x 743.3 x 62.7 mm 43 kg Landscape / Portrait USER INTERFACE OSD Language English ENVIRONMENT I/O Ports Fuse Operation Temperature Storage Temperature Humidity HDMI RS-232 Audio USB port RJ-45 Extension Connector (Mini USB) External temp. sensor 0C ~ 45C
-20C ~ 60C 10%~80% RH Non-Condensing IN *2 IN *1 OUT *1 IN *2 IN *1 IN *1 (ESK only) IN *1 (ETK only) 5A Design and specifications are subject to change without notice. DW551DR4-1 User Manual 25 Input Mode Active Resolution H Pixels V Lines Refresh Rate 640 720 800 960 1024 1280 1280 1280 1280 1366 1400 1440 1600 1680 1920 1920 480 480 600 600 768 720 768 960 1024 768 1050 900 1200 1050 720 1080 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz DW551DR4-1 User Manual 26 Pin Assignments RS-232 Input PIN No. NAME 01 02 03 04 05 06 07 08 09 Connected to 7&8 TXD RXD Connected to 6 GND Connected to 4 Connected to 1&8 Connected to 1&7 NC DW551DR4-1 User Manual 27 Troubleshooting ISSUE RECOMMENDED SOLUTION No image is displayed. Nothing happens when switching the main switch on. Check whether the cable is completely plugged in. Check whether the main switch is in the ON position, and the power cord is completely plugged in. Check whether the image sources resolution is set as the supported format (refer to section Input Mode, p.26). Check whether the cable is damaged or bent excessively. Unplug the power cord from the socket and plug it in again after a few seconds to reset the Signage. Note: Unplugging the power cord will not change the settings. Image is unstable. Check whether the cable is completely plugged in. The remote control does not work. Auto on/off does not work or does not function properly. Cannot control the display remotely via RS-232. Check whether there are batteries in the remote control. Check the batteries for freshness, polarity, etc. Check whether the remote is in the operation range. Bright light may interfere with the remote control. Please avoid using the remote control near special fluorescent lights or neon lights. Check whether the TIMER setting in the menu is set to OFF. Check whether the Power On Time and Power Off Time settings are set correctly. Check whether the RS-232 cable is connected properly. If you are still having trouble with your DynaScan DS Professional LCD, contact your dealer or DynaScan directly for more assistance. DW551DR4-1 User Manual 28 About DSM365 DSM365 is an internal operating system as Android, which can install the applications via USB flash drive storage, SD card or Internet. How to Switch to DSM365 Press the MENU button on either the rear panel control or remote control to show the OSD. Use the navigation arrows to select and adjust the Input Source.
[Input Source Main DSM365]
ITEM DESCRIPTION APPS Show the Installed APPS. DW551DR4-1 User Manual 29 About SDM Install SDM on the display
*Note: SDM must comply with Rated Power DC 12V 45W (Max 50W) and IEC 62368-1 Standard. 1. Loosen screws and remove the SDM cover from the display. 2. Insert the SDM module into the display and fasten screws. Make sure the SDM properly installed to avoid causing the devise destruction. DW551DR4-1 User Manual 30 Switch to SDM Press the MENU button on either the rear panel control or remote control to show the OSD. Use the navigation arrows to select and adjust the Input Source.
[ Input Source Main SDM ]
DW551DR4-1 User Manual 31 www.dynascandisplay.com Copyright DynaScan Technology, Inc. All Rights Reserved. DW551DR4-1 User Manual 32
1 2 3 4 | Users Manual for module | Users Manual | 824.67 KiB | November 16 2023 / November 17 2023 |
User Manual for Android Control Board With Wireless module Product Digital Transmission System Model No FBP206 1. Applicable Products Model Description Model 55Display 65512, 65514 FBP206 User Manual 2. Feature Feature Implementation Power Supply 5.0V0.25V Temperature range Work temperature-20C+70C Storage temperature-55C+125C 3. Environmental Characteristics
(1) Temperature Operating0C+40C Storage-20C+70C
(2) Humidity Operating10% to 90% (non-condensing) Storage5% to 95% (non-condensing)
(3) Altitude Operating10,000 ft. (max) Storage20,000 ft. (max) 4. FBP206 User Manual Connector Description USB2.0 5V DM DP 5V Supply Voltage USB Data USB Data GND Ground Antenna 1 Antenna 2 Single-band 5G or dual-band antennas can be used, single-band 2.4G antennas cannot be used 5. Module Specification
(1) General Description This document is to specify the product requirements for 802.11a/b/g/n/ac USB Module. This Card is based on REALTEK RTL8812CU chipset .It is a complete dual-band(2.4GHz and 5GHz)WIFI 22 MIMO MAC/PHY/Radio System-on-a-Chip. This module provides a high level of integration with a dual-stream IEEE 802.11ac MAC/ base band/radio. The WLAN operation supports 20MHz,40MHz and 80MHz channels for data rates up to 866.7Mbps. It is also backward complied with IEEE 802.11a standard from 5.15~5.825GHz wideband and IEEE 802.11b/g standard from 2.4~2.5GHz. It can be used to provide up to 54Mbps for IEEE 802.11a and IEEE 802.11g, 11Mbps for IEEE 802.11b and 300Mbps for IEEE 802.11n. FBP206 User Manual
(2) Featires Compatible with IEEE 802.11a standard to provide wireless 54Mbps dara rate. Compatible with IEEE 802.11b standard to provide wireless 11Mbps dara rate. Compatible with IEEE 802.11g standard to provide wireless 54Mbps dara rate. Compatible with IEEE 802.11n standard to provide wireless 300Mbps dara rate. Compatible with IEEE 802.11ac standard to provide wireless 866.7Mbps dara rate. Support 20MHz, 40MHz bandwidth in 2.4GHz band Operation at 2.4G5GHz and 5.155.825GHz frequency band to meet worldwide regulations Supports MU-MIMO. Support STBC, LDPC Supports IEEE 802.11i (WPA and WPA2), WAPI. Drivers support Windows, Linux, Android High speed USB 2.0 interface RoHS compliant 6. Application Diagrams
(1) Functional Block Diag FBP206 User Manual
(2) General Requirements IEEE 802.11a Section Feature Detailed Description Radio and Modulation Type QPSKBPSK16QAM64QAM with OFDM Operating Frequency 5.15G5.25GHz 5.725G5.825GHz Data Rate at most 54Mbps Media Access Protocol CSMACA with ACK Typical RF Output Power (tolerance2dB) at each RF chain, Transmitter Output Power at Antenna Connector Data Rate and at room Temp. 25 degree C 152 dBm at 54Mbps Receiver Sensitivity at Antenna Connector Typical Sensitivity at each RF chain. Frame (1000-byte PDUs) Error Rate10% at room Temp. 25 degree C
-73 dBm at 54Mbps IEEE 802.11b Section Feature Detailed Description Radio and Modulation Schemes DQPSKDBPSKDSSSCCK Operating Frequency 2400M2483.5MHz, ISM band Channel Numbers 13 channels for Worldwide Data Rate at most 11Mbps Media Access Protocol CSMACA with ACK Typical RF Output Power (tolerance2dB) at each RF chain, Transmitter Output Power at Data Rate and at room Temp. 25 degree C Antenna Connector 162 dBm at 11Mbps Receiver Sensitivity at Antenna Connector Typical Sensitivity at Which Frame (1000-byte PDUs) Error Rate8% at room Temp. 25 degree C
-82 dBm at 11Mbps FBP206 User Manual IEEE 802.11g Section Feature Detailed Description Radio and Modulation Type QPSKBPSK16QAM64QAM with OFDM Operating Frequency 2400M2483.5MHz, ISM band Channel Numbers 13 channels for Worldwide Data Rate at most 54Mbps Media Access Protocol CSMACA with ACK Typical RF Output Power (tolerance2dB) at each RF chain, Transmitter Output Power at Data Rate and at room Temp. 25 degree C Antenna Connector 152 dBm at 54Mbps Receiver Sensitivity at Antenna Connector Typical Sensitivity at Which Frame (1000-byte PDUs) Error Rate10% at room Temp. 25 degree C
-73 dBm at 54Mbps IEEE 802.11n Section Feature Detailed Description Radio and Modulation Type QPSKBPSK16QAM64QAM with OFDM 2.4GHz 2400M2483.5MHz Operating Frequency 5.15G5.25GHz 5GHz 5.725G5.825GHz Data Rate at most 300Mbps Media Access Protocol CSMACA with ACK Transmitter Output Power at Antenna Connector Typical RF Output Power (tolerance2dB) at each RF chain, Data Rate and at room Temp. 25 degree C 2.4GHz BandHT20HT40 5GHz BandHT20HT40 152 dBm at MCS7 Receiver Sensitivity at Antenna Typical Sensitivity at each RF chain. Frame (1000-byte PDUs) Connector Error Rate10% at room Temp. 25 degree C FBP206 User Manual 2.4GHz BandHT20
-70 dBm at MCS7 2.4GHz BandHT40
-66 dBm at MCS7 5GHz BandHT20
-71 dBm at MCS7 5GHz BandHT40
-67 dBm at MCS7 IEEE 802.11ac Section Feature Detailed Description Radio and Modulation Schemes QPSKBPSK16QAM64QAM256QAMOFDM Operating Frequency 5.155.25GHz5.7255.825GHz Data Rate at most 866.7Mbps Media Access Protocol CSMACA with ACK Typical RF Output Power (tolerance2dB) at each RF chain, Data Rate and at room Temp. 25 degree C Transmitter Output Power at Antenna Connector HT20152 dBm at MCS8 HT40152 dBm at MCS9 HT80132 dBm at MCS9 Typical Sensitivity at each RF chain. Frame (1000-byte PDUs) Error Rate10% at room Temp. 25 degree C Receiver Sensitivity at Antenna Connector 5GHz BandHT20-64 dBm at MCS8 5GHz BandHT40-61 dBm at MCS9 5GHz BandHT80-58 dBm at MCS9 FCC Statement FBP206 User Manual FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. CAUTION Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. End Product Labeling The end product shall bear the following 15.19 statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This transmitter module is authorized only for use in device where the antenna may be installed such that 20cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following:
Contains FCC ID: 2AKWYFBP206 FBP206 User Manual This module is intended under the following conditions 1. This module is certified pursuant to Part 15 rules section(15.247). 2. This module is limited to host model number: 65512/ Brand: DynaScan 3. This module has been approved to operate with the antenna types listed below, with the maximum permissible gain indicated. Frequency Band Antenna Type Gain(dBi) 2400-2500MHz 5150-5850MHz PIFA PIFA
-3.04
-2.31 Information on test modes and additional testing requirements This module is restricted to integration into hosts for indoor use only. Be limited the operation channels in channel 1-11 for 2.4GHz band. The separate approval is required for all other operating configurations, including portable configurations with respect to Part 2.1093 and different antenna configurations. The information on how to configure test modes for host product evaluation for different operational conditions for a stand-alone modular transmitter in a host, versus with multiple, simultaneously transmitting modules or other transmitters in a host can be found at KDB Publication 996369 D04. Additional testing, Part 15 Subpart B disclaimer Appropriate measurements (e.g. 15B compliance) and if applicable additional equipment authorizations (e.g. SDoC) of the host product to be addressed by the integrator/manufacturer. This module is only FCC authorized for the specific rule part 15.247 listed on the grant, and the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host product as being Part 15 Subpart B compliant. The user manual of the end product should include This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. FBP206 User Manual Name: DynaScan Technology, Inc. Address: 7 Chrysler, Irvine, CA 92618, USA Office: +1 949.421.0348 https://www.dynascandisplay.com
1 2 3 4 | Internal Photos revised 0819 | Internal Photos | 2.47 MiB | August 19 2022 / August 25 2022 |
1 2 3 4 | External Photos revised 0819 | External Photos | 610.63 KiB | August 19 2022 / August 25 2022 |
1 2 3 4 | ID Label/Location Info | ID Label/Location Info | 282.49 KiB | November 16 2023 / November 17 2023 |
Label location CONTAINS FCC ID: 2AKWYFBP206 Model Code : ********
P/N Code : 9G********
Model Name : 65514 5022047 S/N Code or Rating : 100-240V ~ 50/60Hz 4.5A 3 0 0 0 n i t s 3 0 0 0 n i t s This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. DynaScan Technology Corp. 6F, No. 88, Wenmao Rd., Guishan Dist., Taoyuan City 333001, Taiwan Made in Taiwan
1 2 3 4 | ID Label/Location Info revised 0819 | ID Label/Location Info | 301.77 KiB | August 19 2022 / August 25 2022 |
CONTAINS FCC ID: 2AKWYFBP206 DynaScan goes 5 yg ULSTD. 623681 O CERTIFIEDTO 5 5022047 NO. 62368-1 Model Code : SIN Code PIN Code : 9G********
Rating : 100-240V ~ 50/60Hz 4A SEREREE SERRE SS 6 4 4 x C Homr HIGH-OBFINITION MULTIMEDIA INTERFACE suu QOOE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. DynaScan Technology Corp. 6F, No. 88, Wenmao Rd., Guishan Dist., Taoyuan City 333001, Taiwan Made in Taiwan
1 2 3 4 | Authority to Act as Agent | Cover Letter(s) | 32.68 KiB | November 16 2023 / November 17 2023 |
DynaScan Authority to Act as Agent Net ;
Dynascan Technology Corp. Date: 2023.10.06 Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands To Whom It May Concern:
Intertek Testing Services Taiwan Ltd (Rico Deng) is authorized to act on our behalf, until otherwise notified, for applications to Telefication B.V., Dept. FCC TCB. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Asson Ko
(Print name) ___ Senior Manager On behalf of:
(Company Name) Telephone: +886-396-0541 ext :89741
1 2 3 4 | C2PC | Cover Letter(s) | 7.92 KiB | November 16 2023 / November 17 2023 |
Class II change Letter Date : 2023/10/16 This is an application for a class ii permissive change for FCC ID :
2AKWYFBP206, Original granted on 2022/8/26 We change the following points from the original model; the other is identical to the previously certified device. 1. Adding a host, product name: Display; brand: DynaScan; model: 65514 Sincerely, Asson Ko Signature Printed Title: Senior Manager On behalf of: DynaScan Technologe Corp.
1 2 3 4 | Confidentiality Request Letter | Cover Letter(s) | 34.73 KiB | November 16 2023 / November 17 2023 |
DynaScan 3 Lind To:
Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: 2AKWYFBP206 Pursuant to sections 0.457 and 0.459 of CFR 47, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application as:
Block Diagram Schematics Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely signature :
name & title | Asson Ko er Tel +886-396-0541 ext :89741 6F,No.88, Wenmao Rd., Guishan Dist., Taoyuan City 333001, Taiwan
1 2 3 4 | Test Setup Photos DTS | Test Setup Photos | 2.21 MiB | November 16 2023 / November 17 2023 |
1 2 3 4 | agent-letter | Attestation Statements | 84.95 KiB | November 16 2023 / November 17 2023 |
Designated U.S. Agent Matthew Ladunr E Agent letter FCC attestation statement Kiwa Page 1 of 2 RF_753, Issue 2 15-02-2023
[PLACE ON APPLICANT/COMPANY LETTERHEAD]
U.S. Agent Designation for Service of Process
(Applicant and U.S. Agent are Separate Parties) TO Kiwa Nederland B.V. Wilmersdorf 50 7327 AC Apeldoorn Postbus 137 7300 AC Apeldoorn Netherlands ATTENTION: FCC Certification Section 2.911(d)(7) Information Company name: DynaScan FRN 0026170399 Contact person name: Matthew Ladner Street address 7 Chrysler ZIP/City/State Irvine, CA 92618 Telephone number: 949.356.1986 ext 154 Email address: matt.ladner@dynascandisplay.com Signature:
Date: 11/15/2023 This letter is to confirm that we (the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-
related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. licant Company name: DynaScan Technology Corp. Grantee Code: 2AKWYFBP206 Contact person name: Asson Ko Street address 6F,No.88, Wenmao Rd., Guishan Dist., ZIP/City/State 333001 Taoyuan Taiwan Telephone number: DynaScan Technology Corp. Email address: asson@dynascan.com.tw New Signature Revision Section Page number Remark(s) number Issued/modified by Function Revision Date Verified by Function Date Agent letter FCC attestation statement Kiwa Page 2 of RF_753, Issue 2 15-02-2023
[PLACE ON APPLICANT/COMPANY LETTERHEAD]
Revision Record Sheet:
issued by 07-02-2023 1% version 15-05-2023 Added FRN to Agent details Richard van der Meer Certification assessor 02 15-02-2023 Willem Jan Jong Team Lead
-02-2023 Released by Axel Gase Function Manager Quality Assurance Date of release -02-2023
1 2 3 4 | covered list attestation | Attestation Statements | 57.91 KiB | November 16 2023 / November 17 2023 |
Certification Application Attestation Statements Statement for 47 CFR section 2.911(d)(5)(i) Statement for 47 CFR section 2.911(d)(5)(ii) hitps://mww foc.gov/supplychain/coverediist . Covered list attestation FCC application letter Kiwa Page | of 1 RF 755 02 15-02-2023
[PLACE COMPANY LOGO HERE OR PUT ON COMPANY LETTERHEAD]
1_ The Commissions Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission's website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitute covered equipment.
(2): For FCC it must be the Grantee Code owner or the authorized agent.
(3): double click on the appropriate box and select checked then OK DynaScan Technology Corp. 6F,No.88, Wenmao Rd., Guishan Dist., 333001 Taoyuan Taiwan Subject: FCC ID: 2AKWYFBP206 To Whom It May Concern
[DynaScan Technology Corp.] certifies that as of the date of the application the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not covered equipment. Additional Explanation: <N/A>
[DynaScan Technology Corp_] (the applicant) certifies that, as of the date of the filing of this application, the applicant O - is/ &- is not identified on the Covered List as an entity producing covered equipment Date: 2023/11/13 City: Taoyuan Name?) Asson Ko Function Director Telephone number: +88633960541 Extension: 89741 Email address asson@dynascan.com.tw Signature
1 2 3 4 | Test Setup Photos NII | Test Setup Photos | 850.35 KiB | November 16 2023 / November 17 2023 |
1 2 3 4 | Channel 12 and 13 Declaration Letter | Cover Letter(s) | 63.73 KiB | August 19 2022 / August 25 2022 |
DynaScan does not Oo oO Oo
: Asson Ko/ Se ger 6-054T ext:89 Name & title TEL:+886-39 Channel 12 and 13 Declaration Letter Declaration Product hardware have the capability to operate on Channel 12 and 13. Product hardware has the capability to operate on Channel 12 and 13. However, these two channels will be disabled via software and will not be accessible to user. Product hardware has the capability to operate on Channel 12 and 13. However, all the operated channels cant be changed in the RF parameter via software. All channels have complied with all of the requirements sets out in FCC Part 15.247. Product hardware has the capability to operate on WiFi Channel 12 and 13, and meets the requirements of KDB 594280 D01 v02r01. Please note:
1.) By default, this device operates in a mode that is compliant with the U.S. requirements. 2.) This device will also use supplemental information such as geo-location data to determine that it is operating outside the U.S., if necessary, to change its power. Such supplemental data will be derived from the following:
Global Navigation Satellite System (GNSS)7 sensors in the device Mobile Country Code (MCC),8 or MCC with a Mobile Network code (MNC), received from a CMRS9 carrier and received directly by a receiver on the device Country information derived from multiple adjacent access points (for example using IEEE Std 802.11d provisions) may be permitted on case-by-case basis Other suitable geo-location data based on IP addresses or other reliable source nior Mana 741 e-mail : asson@dynascan.com.tw Date : 2022/7/26 Signature
1 2 3 4 | Confidentiality | Cover Letter(s) | 34.87 KiB | August 19 2022 / August 25 2022 |
DynaScan 2022.07.20 To:
Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC 1D: 2AKWYFBP206 Pursuant to sections 0.457 and 0.459 of CFR 47, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application as:
Block Diagram Schematics Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signature :
Name & title / Senior Manager Tel +886-396-0541 ext:89741 address: 6F., No. 88, Wenmao Rd., Guishan Dist., Taoyuan City 333001, Taiwan
1 2 3 4 | Modular approval letter | Cover Letter(s) | 81.61 KiB | August 19 2022 / August 25 2022 |
DynaScan Digital Transmission Systems FCC ID: 2AKWYFBP206 i De) Manager Date) 07/20/2022 is seeking FCC Authorization as a [_]Single Modular Transmitter / D Single Limited Modular Transmitter (Please check one) The EUT meets the requirements for _]Single Modular Approval / [X]Single Limited Modular Approval (Please check one) as detailed in KDB 996369. Compliance to each of the requirements is described below:
Item Modular requirement Yes No Have its own RF shielding Have buffered modulation/data inputs (if such inputs are provided) The modular transmitter must have its own power supply regulation. Meet the antenna requirements of section 15.203 Be tested in a stand-alone configuration, i.e., the antenna, AC or DC power and data input/output lines must be connected to the module but, the module must not be inside another case during testing. Be labeled with its own FCC ID number, and if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. The modular transmitter is manufactured so that the user can not influence the operation of the transmitter that will operate outside of the scope of the requlations. Address compliance with the Commission's RF exposure limits in Sections 1.1310 and 2.1093. Client's signature Client's name / title Asson Ko / Senior Contact information / address Tel +886-396-0541 ext :89741 6F,No.88, Wenmao Rd., Guishan Dist., Taoyuan City 333001, Taiwan Please provide a detailed explanation if the answer is
"No"
Note:
(1) LMA may be granted when one or more of the requirements in the table above cannot be demonstrated LMA will also be issued in those instances where applicants can demonstrate that they will retain control over the final installation of the device, such that compliance of the end product is assured In such cases, an operating condition on the LMA for the module must state that the module is only approved for use when installed in devices produced by a specific manufacturer When LMA is sought, the application for equipment certification musi specifically state how control of the end product into which the module will be installed, and will be maintained, such that full compliance of the end product is always ensured Please provide Clear and specific instructions describing the conditions, limitations and procedures for third-parties to use and/or integrate the module into a host device. For non-Software Defined Radio transmitter modules where software is used to ensure compliance of the device, technical description of how such control is implemented to ensure prevention of third party modification must be provided (see KDB 594280). Note 1: Compliance of a module in its final configuration is the responsibility of the applicant. A host device will not be considered certified if the instructions regarding antenna configuration provided in the original description, of one or more separately certified modules it contains, were not followed. Example: A separately certified low-power transceiver module using Bluetooth technology which is housed in a desktop computer, laptop or peripheral does not require the overall system to be recertified, if the desktop computer, laptop or peripheral, as a stand-alone unit, complies with all applicable technical standards.
1 2 3 4 | Test Setup Photos Conducted emission | Test Setup Photos | 249.21 KiB | August 19 2022 / August 25 2022 |
1 2 3 4 | Test Setup Photos Radiated emission | Test Setup Photos | 441.12 KiB | August 19 2022 / August 25 2022 |
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2023-11-17 | 2412 ~ 2462 | DTS - Digital Transmission System | Class II Permissive Change |
2 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | ||
3 | 2022-08-25 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
4 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 4 | Effective |
2023-11-17
|
||||
1 2 3 4 |
2022-08-25
|
|||||
1 2 3 4 | Applicant's complete, legal business name |
DynaScan Technology Corp.
|
||||
1 2 3 4 | FCC Registration Number (FRN) |
0026170399
|
||||
1 2 3 4 | Physical Address |
6F,No.88, Wenmao Rd., Guishan Dist.
|
||||
1 2 3 4 |
Taoyuan, N/A
|
|||||
1 2 3 4 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 2 3 4 | TCB Application Email Address |
c******@telefication.com
|
||||
1 2 3 4 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 3 4 | Grantee Code |
2AKWY
|
||||
1 2 3 4 | Equipment Product Code |
FBP206
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 4 | Name |
A******** K******
|
||||
1 2 3 4 | Telephone Number |
+8863******** Extension:
|
||||
1 2 3 4 | Fax Number |
+8863********
|
||||
1 2 3 4 |
a******@dynascan.com.tw
|
|||||
app s | Technical Contact | |||||
1 2 3 4 | Firm Name |
Intertek Testing Services Taiwan Ltd.
|
||||
1 2 3 4 | Name |
R**** D****
|
||||
1 2 3 4 | Physical Address |
No. 17, Ln. 246, Niupu S. Rd., Xiangshan
|
||||
1 2 3 4 |
No. 11, Lane 275, Ko-Nan 1 Street, Chia-Tung Li
|
|||||
1 2 3 4 |
Hsinchu City
|
|||||
1 2 3 4 |
Taiwan
|
|||||
1 2 3 4 | Telephone Number |
886-3********
|
||||
1 2 3 4 |
+8863********
|
|||||
1 2 3 4 | Fax Number |
886-3********
|
||||
1 2 3 4 |
886-3********
|
|||||
1 2 3 4 |
R******@intertek.com
|
|||||
1 2 3 4 |
R******@intertek.co
|
|||||
app s | Non Technical Contact | |||||
1 2 3 4 | Firm Name |
Intertek Testing Services Taiwan Ltd.
|
||||
1 2 3 4 | Name |
S******** L********
|
||||
1 2 3 4 | Physical Address |
No. 17, Ln. 246, Niupu S. Rd., Xiangshan
|
||||
1 2 3 4 |
No. 11, Lane 275, Ko-Nan 1 Street, Chia-Tung Li
|
|||||
1 2 3 4 |
Hsinchu City
|
|||||
1 2 3 4 |
Taiwan
|
|||||
1 2 3 4 | Telephone Number |
886-3********
|
||||
1 2 3 4 |
+8863********
|
|||||
1 2 3 4 | Fax Number |
886-3********
|
||||
1 2 3 4 |
886-3********
|
|||||
1 2 3 4 |
S******@intertek.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 3 4 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 4 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 4 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 4 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 3 4 | NII - Unlicensed National Information Infrastructure TX | |||||
1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Digital Transmission Systems | ||||
1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 4 | Modular Equipment Type | Limited Single Modular Approval | ||||
1 2 3 4 | Purpose / Application is for | Class II Permissive Change | ||||
1 2 3 4 | Original Equipment | |||||
1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 4 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 4 | Grant Comments | C2PC: Adding a host, product name: Display; brand: DynaScan; model: 65514 Limited Single modular. Power output listed is conducted. This module may only be installed in the Dual Side Digital Signage Display(Model : 65512)as specified in this filing. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes. | ||||
1 2 3 4 | C2PC: Adding a host, product name: Display; brand: DynaScan; model: 65514 Limited Single modular. Power output listed is conducted. This module may only be installed in the Dual Side Digital Signage Display(Model : 65512)as specified in this filing. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210MHz and 5775 MHz. | |||||
1 2 3 4 | Limited Single modular. Power output listed is conducted. This module may only be installed in the Dual Side Digital Signage Display(Model : 65512)as specified in this filing. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes. | |||||
1 2 3 4 | Limited Single modular. Power output listed is conducted. This module may only be installed in the Dual Side Digital Signage Display(Model : 65512)as specified in this filing. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210MHz and 5775 MHz. | |||||
1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 4 | Firm Name |
International Standards Laboratory Corp.
|
||||
1 2 3 4 |
Intertek Testing Services Taiwan Ltd.
|
|||||
1 2 3 4 | Name |
A**** C********
|
||||
1 2 3 4 |
L**** S******
|
|||||
1 2 3 4 | Telephone Number |
886-3******** Extension:
|
||||
1 2 3 4 |
886-2********
|
|||||
1 2 3 4 | Fax Number |
886-3********
|
||||
1 2 3 4 |
886-2********
|
|||||
1 2 3 4 |
a******@isl.com.tw
|
|||||
1 2 3 4 |
l******@intertek.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC MO | 2412.00000000 | 2462.00000000 | 0.7600000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15E | CC MO | 5180 | 5240 | 0.15 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15E | CC MO | 5745 | 5825 | 0.44 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | CC MO | 2412.00000000 | 2462.00000000 | 0.7600000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15E | CC MO | 5180 | 5240 | 0.15 | |||||||||||||||||||||||||||||||||||
4 | 2 | 15E | CC MO | 5745 | 5825 | 0.44 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC