FCC ID: 2AKWYXBP301 Digital Transmission Systems

DW651LR5 USER MANUAL 65 Clean Back Digital Signage 66502 | V2.03 Contents Material Contents Declaration ................................................................................................................ 2 Recycling and Energy Information ......................................................................................................... 2 Declaration of Conformity ....................................................................................................................... 3 Safety Precautions ................................................................................................................................. 5 Important Safety Information .................................................................................................................. 7 Getting Started ....................................................................................................................................... 9 Contents ............................................................................................................................................. 9 Installing and Replacing Remote Control Batteries ............................................................................ 9 Installation............................................................................................................................................. 11 Connecting to a Power Source ......................................................................................................... 14 Connecting an External Video Source ............................................................................................. 14 Input / Output Terminals ................................................................................................................... 15 Operating Instructions .......................................................................................................................... 16 Powering On/Off the Display ............................................................................................................ 16 Using the Remote Control ................................................................................................................ 17 Using the built-in keypad .................................................................................................................. 19 Navigating the On Screen Display (OSD) Menu .................................................................................. 20 Specifications ....................................................................................................................................... 25 Input Mode ............................................................................................................................................ 26 Pin Assignments ................................................................................................................................... 27 RS-232 Input .................................................................................................................................... 27 Troubleshooting .................................................................................................................................... 28 About DSM365 ..................................................................................................................................... 29 About SDM ........................................................................................................................................... 30 Install SDM on the display ................................................................................................................ 30 Switch to SDM .................................................................................................................................. 31 1 Material Contents Declaration Hazardous Substances Hexavalent Chromium Biphenyls Polybrominated Polybromodiphenyl Part Name Lead Mercury Cadmium PCBA CHASSIS ACCESSORY Pb O O O O Hg O O O O Cd O O O O Cr6+

O O O O PBB O O O O PACKAGE O indicates that the level of the specified chemical substance is less than the threshold level specified in the standards of SJ/T-11363-2006 and EU 2011/65/EC. indicates that the level of the specified chemical substance exceeds the threshold level specified in the standards of SJ/T-11363-2006 and EU 2011/65/EC. Ethers PBDE O O O O Recycling and Energy Information DynaScan is firmly committed to its environmental protection efforts and we believe that reducing our products impact on the environment is of the utmost importance. We are dedicated to meet the latest environmental protection regulations. Energy usage Mode Normal Standby Energy Consumption Max. 740W

< 1W Disposal Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being. When replacing old appliances with new one, the retailer is legally obligated to take back your old appliances for disposal at least for free of charge. 2 Declaration of Conformity FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. CAUTION:

Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Manufacturer Name DynaScan Technology Corp. Manufacturer Address 7F, 66 Huaya 1st Road, Guishan, Taoyuan 33383,Taiwan This device complies with Directive 2014/53/EU issued by the Commission of the European Community. Article 3.1 (a) EN 62368-1:2014/AC:2015 IEC 62368-1 Article 3.2 EN 300328 V2.2.2(2019-07) Article 3.1 (b) EN 55032:2015/AC:2016 Class A EN 61000-3-2:2014 EN 61000-3-3:2013 EN 55035:2017 EN 301489-1 V2.2.0(2017-03) EN 301489-17 V3.2.0(2017-03)

- Frequency bands and Powers a. WIFI 2.4G-2412~2462MHz. b. Maximum radio-frequency power transmitted in the 2.4GHz is 50mW. 3 Dclaration de conformit FCC Cet appareil est conforme la section 15 de la rglementation FCC. Son utilisation est sujette aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interfrence nuisible, et (2) cet appareil doit accepter toute interfrence reue, y compris celles qui peuvent causer un fonctionnement non souhait. D CLARATION DE LA COMMISSION F D RALE DES COMMUNICATIONS Cet quipement a t test et dclar conforme aux limites d'un appareil numrique de classe A, conformment la partie 15 des rgles de la FCC. Ces limites sont conues pour fournir une protection raisonnable contre les interfrences nuisibles lorsque l'quipement est utilis dans un environnement commercial. Cet quipement gnre, utilise et peut mettre de l'nergie de radiofrquence et, s'il n'est pas install et utilis conformment au manuel d'instructions, peut provoquer des interfrences nuisibles aux communications radio. Le fonctionnement de cet quipement dans une zone rsidentielle est susceptible de provoquer des interfrences nuisibles, auquel cas l'utilisateur devra corriger les interfrences ses propres frais. ATTENTION :

Tout changement ou modification, non expressment approuv par le responsable de la conformit, peut rvoquer lautorit de l'utilisateur employer l'appareil en question. Avertissement relatif aux expositions RF Cet appareil doit tre install et utilis en accord avec les instructions fournies et les antennes utilises pour cet metteur doivent tre installes de faon fournir une distance de sparation d'au moins 20 cm par rapport toute personne, et elles ne doivent pas tre co-localises ni opres en conjonction avec d'autres antennes ou metteurs. Les utilisateurs finaux et les installateurs doivent recevoir les instructions d'installation des antennes et les conditions d'utilisation de l'metteur pour satisfaire la conformit aux expositions RF. Nom du fabricant DynaScan Technology Corp. Adresse du fabricant 7F, 66 Huaya 1st Road, Guishan, Taoyuan 33383,Tawan Cet appareil est conforme la directive 2014/53/UE mise par la Commission de la Communaut europenne. L'article 3.1 (a) EN 62368-1:2014/AC:2015 IEC 62368-1 L'article 3.2 EN 300328 V2.2.2(2019-07) L'article 3.1 (b) EN 55032:2015/AC:2016 Classe A EN 61000-3-2:2014 EN 61000-3-3:2013 EN 55035:2017 EN 301489-1 V2.2.0(2017-03) EN 301489-17 V3.2.0(2017-03)

- Bandes de frquences et puissances a. WIFI 2,4G-2412~2462MHz. b. La puissance radiofrquence maximale transmise dans la bande 2,4 GHz est de 50 mW 4 Safety Precautions CAUTION Do not install near flammable material or any heat sources. Do not defeat the safety purpose of the grounding-type plug. Do not disassemble the display to avoid electrical shock or burn. Normal operating condition considers installation at an altitude below 2000m;

some abnormalities may be experienced when installed at an altitude above 2000m. WARNING Please power off the LCD and the video source before plugging in the DP or HDMI cable. Please installed the display in well-ventilated place, do not install in a confined space. Suitable for mounting on concrete or other non-combustible surface only. If it gives off smoke, strange smell, or unusual noise, or when it gets too hot to touch, immediately unplug the display and contact the dealer. Clean only with soft, dry cloth but not use chemical liquids, and unplug while cleaning. Do not use extreme force or any sharp or pointed objects to touch the display. Do not drop or allow any object to fall to the display. Do not operate the display with wet hands to avoid electric shock. Do not discard this product with general household waste. Please be sure to comply with the local waste regulations. This device uses, generates and radiated radio frequency energy. The radio frequency energy produced by this device is well below the maximum exposure allows by Federal Communications Commission (FCC). When a stationary or fixed image is displayed on the screen for a long time, the image may be permanently imprinted on the screen. This phenomenon is known as image burn-in and is not covered by the manufacturer's warranty. In order to avoid burn-in, avoid prolonged display of static or fixed images on the screen. Power supply cord must not be attached to the building surface, nor run through walls, ceilings, floors and similar openings in the building structure. Power cord shall be connected to a socket-outlet with earthing connection. 5 Prcautions relatives la scurit PR CAUTIONS N'installez pas installer proximit de matriaux inflammables ou de sources de chaleur. Ne pas compromettre la scurit de la fiche de mise la terre. Pour viter tout choc lectrique ou la brlure, ne dmontez pas l'cran. Le produit peut normalement tre utilis une altitude infrieure 2000 m. Des anomalies peuvent survenir lors de linstallation de lappareil une altitude suprieure 2000 m. AVERTISSEMENT Veuillez teindre l'cran LCD et la source vido avant de brancher le cble DP ou HDMI. Veuillez installer l'cran dans un endroit bien ventil, pas dans un espace confin. Convient pour le montage sur du bton ou autre surface non combustible uniquement. S'il dgage de la fume, une odeur trange ou un bruit inhabituel, ou s'il est trop chaud au toucher, dbranchez immdiatement l'cran et contactez le revendeur. Nettoyez uniquement avec un chiffon doux et sec, sans utiliser de produits chimiques, et dbranchez-le pendant le nettoyage. N'exercez pas une force excessive et nutilisez pas d'objets tranchants ou pointus pour toucher l'cran. Ne laissez pas tomber lcran et ne laissez aucun objet tomber dessus. Afin dviter tout choc lectrique, n'utilisez pas l'cran avec les mains mouilles. Ne jetez pas ce produit avec les dchets mnagers. Assurez-vous de respecter les rglementations locales en matire de dchets. Cet appareil utilise, gnre et rayonne de lnergie radiofrquence. L'nergie de radiofrquence produite par cet appareil est bien infrieure l'exposition maximale autorise par la FCC (Federal Communications Commission). Lorsqu'une image immobile ou fixe est affiche sur l'cran pendant une longue priode, l'image peut tre imprime de manire permanente sur l'cran. Ce phnomne est connu sous le nom d'image rmanente et n'est pas couvert par la garantie du fabricant. Afin d'viter toute dtrioration, vitez l'affichage prolong d'images statiques ou fixes sur l'cran. Le cordon d'alimentation ne doit pas tre connect la surface du btiment, ni traverser les murs, les plafonds, les planchers et les ouvertures similaires du btiment. Le cordon d'alimentation doit tre connect une prise lectrique mise la terre 6 Important Safety Information Disassembling the LCD is strictly prohibited. Opening the cover may expose the user to electric shock or other hazards. Please contact DynaScan certified service professionals for all maintenance requirements. Do not allow any liquid to enter the LCD. Also avoid placing the LCD close to water sources. Do not place heavy objects on the power cord. A damaged power cord might cause electric shock or fire. Do not bend, twist, or damage the power cord. The power cord must comply with the local safety regulations. Do not damage or modify the prongs/pins and the ground contact on the power cord plug. Do not place the LCD on an unleveled surface or an unstable vehicle. The LCD could fall over and cause substantial damage. Do not cover the vents and/or the heat sink. Do not install the LCD beside radiators or other heat sources. The installation site should have sufficient ventilation so the heat generated by the LCD can be dissipated. Do not use the Signage in a hot, humid, dusty, or fumy environment. Handle the LCD with care. Save the packaging materials for transport later. Clean the LCD backside at least once a month for dust and other particles. Damaged power cord or power plug. If liquid or foreign object has entered the LCD. If the LCD has been exposed to rain or water. If the LCD has been dropped or the casing has become damaged. If any structural damage such as cracks or unnatural vibration is found. If the LCD cannot be operated following the steps outlined in this manual. If the LCD emits smoke or other odors, or generates strange noises. Unplug the LCD immediately and contact a DynaScan certified service professional as soon as possible when any of the following situations occurs:

Operating Suggestions Cleaning the Panel Use a soft, lint-free cloth to gently wipe the dust off from the screen panel. Do not use any hard material to wipe the panel. Do not poke the panel with your hand or any sharp object (such as a pen or a nail) or exert excessive pressure on the panel to prevent any damage. Do not use any cleaning solutions on the panel as it might cause discoloration. Avoid displaying a stationary image for a long period of time in order to prevent image sticking. Unplug the power cord. Cleaning the Casing Gently wipe the casing with a soft cloth. Attention Do not use any of the following solutions to clean the casing as they may damage the paint and cause it to crack or peel: benzene solution, alkaline solution, alcohol-based cleaning solution, glass cleaner, wax, polisher, or detergent. 7 Informations importantes relatives la scurit Le dmontage de l'cran LCD est strictement interdit. L'ouverture du capot peut exposer l'utilisateur un choc lectrique ou d'autres dangers. Veuillez contacter des professionnels de service certifis DynaScan pour tous les besoins de maintenance. Ne laissez aucun liquide pntrer dans l'cran LCD. vitez galement de placer lcran LCD proximit de sources deau. Ne placez aucun objet lourd sur le cordon d'alimentation. Un cordon d'alimentation endommag peut provoquer un choc lectrique ou un incendie. Ne pliez pas, ne tordez pas et n'endommagez pas le cordon d'alimentation. Le cordon d'alimentation doit tre conforme aux rglementations locales de scurit. Veillez ne pas endommager ni modifier les broches ou le contact de terre sur la fiche du cordon d'alimentation. Ne placez pas l'cran LCD sur une surface qui nest pas de niveau ou sur un vhicule instable. Lcran LCD pourrait tomber et causer des dgts importants. Ne couvrez pas les orifices de ventilation et / ou le dissipateur de chaleur. N'installez pas l'cran LCD ct de radiateurs ou d'autres sources de chaleur. Le site d'installation doit disposer d'une ventilation suffisante pour que la chaleur gnre par l'cran LCD puisse tre dissipe. N'utilisez pas l'affichage signaltique dans un environnement chaud, humide, poussireux ou enfum. Manipulez lcran LCD avec soin. Conservez les matriaux d'emballage pour tout transport ultrieur. Nettoyez larrire de lcran LCD au moins une fois par mois afin dliminer la poussire et autres particules. Dbranchez immdiatement l'cran LCD et contactez un rparateur professionnel certifi DynaScan ds que possible lorsque l'une des situations suivantes se produit :

Cordon d'alimentation ou fiche d'alimentation endommag. Si du liquide ou un corps tranger est entr dans l'cran LCD. Si lcran LCD a t expos la pluie ou l'eau. Si lcran LCD est tomb ou si le botier a t endommag. Si vous constatez des dommages structurels comme des fissures ou des vibrations non naturelles. Si lcran LCD ne peut pas tre utilis en suivant les tapes dcrites dans le prsent manuel. Si l'cran LCD met de la fume ou d'autres odeurs, ou gnre des bruits tranges. Suggestions dutilisation Nettoyage du panneau vitez d'afficher une image immobile pendant une priode prolonge afin d'viter que la rmanence dimage. Utilisez un chiffon doux non pelucheux pour essuyer dlicatement la poussire du panneau de l'cran. N'utilisez aucun matriau dur pour essuyer le panneau. Afin dviter tout dommage, nappuyez pas sur le panneau avec votre main ou un objet pointu

(comme un stylo ou un ongle) et n'exercez pas de pression excessive sur le panneau. N'utilisez aucune solution de nettoyage sur le panneau car cela pourrait provoquer une dcoloration. Danger de stabilit ou libell quivalent;

Le moniteur peut tomber, entranant des blessures graves ou mortelles ou texte quivalent;

Le texte suivant ou quivalent:

Pour viter les blessures, ce moniteur doit tre solidement fix au sol / mur conformment aux instructions d'installation. 8 Plug Type Plug Shape Voltage NEMA TYPE IEC Display Plug IEC Plug TYPE Getting Started Contents Confirm that the accessories below are shipped along with the display. If any item is missing, please contact your dealer. The color and shape of the accessories may vary with the products. DW651LR5 Professional LCD. Remote Control x 1 pc. Batteries (1.5V / AAA) x2 pcs. Power cable x1 pc. Quick Start Guide x1 pc. ESK302 x1 pc. (optional kit) Attention: Please use the following table to check whether the included power cord is suitable for your region. If the power cord does not match your region, please contact your local supplier. Please use matching AC socket in order to meet your local safety regulations. North America European Continental Japan Taiwan Region U.S.A. / Canada 120V NEMA 5-15 EU

(Except U.K.) 230V CEE 7/7 Japan 100V Taiwan 110V NEMA 1-15 NEMA 5-15 IEC320 C13 Insert 2 new AAA batteries. Installing and Replacing Remote Control Batteries 1. Open the battery compartment cover. 2. 3. Close the battery compartment cover. Warning:

Incorrect usage of batteries may cause leakage or explosion. Pay attention to the polarity when installing the batteries. Do not mix different types of batteries or new and used batteries. Doing so may shorten the battery life or cause leakage. Remove or replace the batteries when they are empty in order to prevent acid leaking in the battery compartment. Do not touch the leaked substance from the batteries in case of a battery leakage. Doing so may hurt human skin. Note: If the remote control is not going to be used for a long time, we recommend removing the batteries from the remote control. 9 Bien dbuter Contenu Vrifiez que les accessoires ci-dessous sont fournis avec lcran. Si l'un d'eux est manquant, veuillez contacter immdiatement votre revendeur. La couleur et la forme des accessoires peuvent varier selon les produits. cran LCD DW651LR5 Professional. Tlcommande x 1 Piles (1,5V / AAA) x 2 Cble d'alimentation x 1 Guide de dmarrage rapide x 1 ESK302 x 1 Attention : Veuillez utiliser le tableau suivant afin de vrifier que le cordon dalimentation fourni est adapt votre rgion. Si le cordon d'alimentation ne correspond pas votre rgion, veuillez contacter votre fournisseur local. Veuillez utiliser la prise secteur correspondante afin de respecter les rglementations locales de scurit. Type de fiche Amrique du Nord Europe continentale Japon Tawan Forme de la fiche Rgion Tension TYPE NEMA Fiche daffichage TYPE fiche CEI CEI tats-Unis /

Canada 120V NEMA 5-15 UE

(Hors R.-U.) 230V CEE 7/7 Japon 100V Tawan 110V NEMA 1-15 NEMA 5-15 IEC320 C13 Insrez 2 nouvelles piles AAA. Mise en place et remplacement des piles de la tlcommande 1. Ouvrez le couvercle du logement piles. 2. 3. Fermez le couvercle du logement piles. Avertissement :

Une mauvaise utilisation des piles peut provoquer des fuites ou une explosion. Faites attention la polarit lors de l'installation des piles. Ne mlangez pas diffrents types de piles ou des piles neuves et usages. Cela pourrait raccourcir la dure de vie des piles ou causer des fuites. Retirez ou remplacez les piles lorsqu'elles sont vides afin d'viter toute fuite d'acide dans le logement piles. Ne touchez pas la substance qui scoule des piles en cas de fuite. Cela pourrait blesser la peau. Remarque : Si la tlcommande ne doit pas tre utilise pendant une priode prolonge, nous vous recommandons den retirer les piles. 10 Installation The LCD has been designed with two ways installation, which suitable for (1) Stand and (2) Ceiling Mount applications. Please note that the display must be properly installed onto the stand (DynaScan optional kit) or well-connected with the hanging kit (DynaScan optional kit), details please refer to the display installation guide. Incorrect installation may cause injury or damage the equipment. Product warranty does not cover the damage caused by improper installation and DynaScan shall not be held responsible in such incident. If you attempt to install the LCD on a different way, such as hanging from the ceiling with your customized hanging kit or your own platform/ enclosure; please contact DynaScan directly for more assistance.

(1) Stand Model Screw Location Screw Length Number Screw Specification DW651LR5 M4 4 A B 28.7 * 17.0 28.7 * 89.0 17.8 * 62.7 17.8 *

137.7 10mm is required 8mm is required Unit: mm A B 11

(2) Ceiling Mount Model Screw Location Screw Length Number Screw Specification DW651LR5 M6 10mm is required 4 Landscape 1310.2 Portrait 629.4 Unit: mm 12 Orientation Take off the cover on the rear of display and the orientation sticker can be found inside, which is for distinguishing the direction of installation. Installation Location Do not install in a location with strong vibrations or dusty. Do not install near the buildings main electric panel. Ensure the LCD is secured in such a manner that it cannot be easily removed by the general public. Leave clearance around the outer edge of the LCD from other objects to ensure proper ventilation. Single display Maintenance Inspect the fasteners regularly for signs of loosening or deformation. Please perform appropriate corrective measures when a problem is identified. Neglecting the problem may worsen the situation. Increase the inspection frequency on areas where previous maintenance had occurred to ensure the problems do not occur again. 13 Connecting to a Power Source Take off the cover from the back of display. Using the power cable provided, plug it in the power inlet which shown in the diagram below. Connect the power cable to a 100-240 volt, 50 / 60Hz AC power outlet. Insert the plug completely into the socket. A loose power connection may cause damage to the display and/or lead to a fire hazard. Connecting an External Video Source Turn OFF the power of both LCD and external video device. Take off the cover from the back of display. Using the DP cable (or HDMI cable) provided, insert one end into the DP-IN (or HDMI 1-IN, HDMI 2-IN) which shown in the diagram below. Connect the other end of the DP cable (HDMI cable) to the DP output (or HDMI output) of the video source. Refer to your video devices manual for additional information. 14 Input / Output Terminals A. RJ-45 1 (IN): RJ45 network input connection. B. RJ-45 2 (IN): RJ45 network input connection. C. RS-232 (IN): RS232C network input connection for remote control from PC. D. HDMI 1 (IN): Connect the HDMI output of a PC or an AV device via a HDMI cable. E. HDMI 2 (IN): Connect the HDMI output of a PC or an AV device via a HDMI cable. F. DP (IN): Connect the DP output of a PC or an AV device via a DP cable. G. USB 3.0 port: Support for USB flash drive storage, mouse and keyboard. H. Extension Connector: Extension Connector for optional IR Extension sensor kit (ESK302). I. Micro SD card: Support for up to 128GB, FAT32 format is supported. J. Thermal: Extension Connector for optional Extension thermal kit (ETK203). K. Audio (OUT): Connect the audio signal output from Audio IN jack to an external AV device. L. AC (IN): Connect the supplied power cor d to the wall outlet. M. Power Switch: Press to switch the main power on/off. N. SDM Slot: Install SDM, please refer to P.26 N B D F H J L A C E G I K M 15 Operating Instructions Powering On/Off the Display To turn on/off the display, take off the cover from the back of display first. Press the power switch on as shown in the diagram below. ON OFF NOTE: The remote control only works when the power switch is ON. 16 Using the Remote Control Connection using an External Sensor Kit (ESK302) Take off the cover from the back of display. Connect the ESK302 cable (optional kit) to the mini USB port, and aim the remote at the IR receiver as shown below. Meanwhile, the IR receiver on the display will be disabled. NOTE: Ambient light may affect the performance of the remote control. Avoid fluorescent or neon lights in the vicinity. 17

*Color and shape may vary by model. ITEM DESCRIPTION POWER MENU UP LEFT RIGHT DOWN OK BACK Power On / Off OSD On / Off Move the cursor up or change the setting of selected item. Exit the current selection. Select the highlighted item. Move the cursor down or change the setting of selected item. Enter (for DSM365 only) Return to the last page. (for DSM365 only) 18 Using the built-in keypad ITEM MENU UP DOWN LEFT RIGHT DESCRIPTION OSD On / Off, Power On / Off. Move the cursor up or change the setting of selected item. Move the cursor down or change the setting of selected item. Exit the current selection. Select the highlighted item. 19 Navigating the On Screen Display (OSD) Menu Press the MENU button on the built-in keypad or remote control to show the OSD. Use the navigation arrows to select and adjust the menu items.

*The change of each setting can only enable when you press LEFT (refer to p.14) to back to the last menu layer. 1. Input Source ITEM 1 ITEM 2 DEFAULT DESCRIPTION Input Source Main Failover 1 Failover 2 Failover 3 Failover 4 HDMI 1 HDMI 2 DP DSM365 SDM Set the Main input to display. Set the Failover 1 input to display. Set the Failover 2 input to display. Set the Failover 3 input to display. Set the Failover 4 input to display. 2. Picture ITEM 1 ITEM 2 DEFAULT DESCRIPTION Picture Color Temperature USER 2 Red Select the color temperature. (User2, User1, D93, D65 and D55). Adjust the red light level. Range 0 100. Note: The feature is only supported on User2 mode. 20 3. Time Green Blue Contrast Gamma 60 2.4 Black Level Auto Adjust the green light level. Range 0 100. Note: The feature is only supported on User2 mode. Adjust the blue light level. Range 0 100. Note: The feature is only supported on User2 mode. Adjust the contrast level. Range 0 100. Adjusts the Gamma value. (Native, 2.2, 2.4 and sGamma) Selects the black level to adjust the screen gray scale. "Limited" for video source uses 16 to 235 levels for R/G/B, such as HDMI.

"RGB Full" for video source uses all levels from 0 to 255 levels.

"Auto" is for detecting the video source to determine its value is applicable for

"Limited" or "RGB Full". ITEM 1 ITEM 2 DEFAULT DESCRIPTION Current Date YYYY:MM:DD Set the date. Time Set the clock. Note: The internal clock will continue to function when the power is turned off. GMT+00:00 Set the day of week. (Monday to Sunday) Set the Time Zone. Automatic power on / off schedule function. Current Time HH:MM:SS Day of Week Time Zone Power Control Timer Power On Time Power Off Time Off 00:00 00:00 Set turn-on time. Set turn-off time. 21 4. Backlight ITEM 1 ITEM 2 DEFAULT DESCRIPTION Auto Brightness Off Backlight High Level Low Level 100 20 High Level Time Low Level Time 00:00 00:00 Local Dimming Local Dimming 2 A. If the AUTO BRIGHTNESS is Off, the screen brightness will remain at HIGH LEVEL brightness value. B. If the AUTO BRIGHTNESS is Auto, the brightness of display will be adjusted according to the ambient light. When ambient light is bright, the screen will adjust to the High Level brightness value set; when ambient light is dark, the screen will adjust to the Low Level brightness value set. C. When the Timer (High Level Time &

Low Level Time) mode is set, the display will automatically switch the brightness according to the time set. D. When setting Mix mode, Timer and Light sensor will work at this mode. For example, setting "High Level Time = 8:00am" and "Low Level Time

= 6:00pm", the light sensor will detect environment brightness and then display will adjust the value of High Level during 8:00am and 6:00pm. Adjusts the highest brightness level. Range 0 100. Adjusts the lowest brightness level. Range 0 100. Set high level time. Set low level time. Adjusts the contrast. UDR1~3 is the highest contrast. Local Dimming 1 is the lowest contrast.

(Local Dimming 1, Local Dimming 2, UDR1, UDR2 and UDR3) 22 5. Advance ITEM 1 ITEM 2 DEFAULT DESCRIPTION Display Mode Portrait Screen Protection Off IR Control On Power Off Mode Standby Advance AC Back Status Power On Volume 50 Reset Default Setting Off Change the Menu orientation. The Menu can be displayed in either LANDSCAPE, PORTRAIT or PORTRAIT FLIP mode. Turn on / off image burn-in protection. Set image burn-in protection interval. Range 0 100 minutes. Enable/disable the remote control for Menu. Note: When disabled, the remote control function can be enabled again from the control panel on the display or through the DynaScan Display Manager application. When in Power Off Mode, RS-232 controls do not function. Only [Main Power Switch] on the display or [Power Button] on the remote control can wake up the display. Choose to use the AC back status function. Power On: Display booting up when the power back after an outage. Standby: Display keeps soft-off status when the power back after an outage. Memory: Display will back to the last state when the power back after an outage. Set volume. Range 100 0. Restore all settings to default. Note: It does not modify CURRENT DATE, CURRENT TIME, DATE OF WEEK, TIME ZONE, POWER ON TIME and POWER OFF TIME. 23 6. Information ITEM 1 ITEM 2 DEFAULT DESCRIPTION Resolution Input resolution. Model DW651LR5 The displays model. Serial Number The displays serial number. Information Hardware Firmware Cabinet Temp. ETK Temp. Humidity ALS Level The H/W version. The F/W version. LCD inner (backlight unit) temperature monitoring. The Extension Thermal Kit (ETK203) is for ambient temperature monitoring. LCD inner (backlight unit) humidity monitoring. The brightness of ambience monitoring.

(Ambience Light Sensor) Some functions may not be available for all models.

*Adjusted value: Each R/G/B value for this product has been individually adjusted during production to a preset color temperature of 6500K. 24 Specifications MODEL PANEL POWER MECHANICAL SPECS I/O Ports LCD Panel Size Native Resolution Brightness Contrast Ratio Response Time Viewing Angle Life Time Panel Surface Power Supply Rated Voltage Power On Mode Power Saving Mode Bezel Width (T/B/L/R) Cabinet Color Monitor Dimension (LxHxD) Monitor Weight (set /

package) Orientation Operation Temperature Storage Temperature Humidity HDMI DP RS-232 Audio USB port RJ-45 Micro SD card Mini USB DW651LR5 64.53 inches 3840 x 2160 4000 cd/m (Typ.) 3,000:1 8 ms (Typ.) 178/ 178 100,000 hrs (Typ.) AG Haze 3%, 2H Internal 100 - 240V, 50 / 60Hz Typ. 500W / Max. 740W

< 1W 19.0/19.0/19.0/19.0 mm Black 1472.5 x 847.4 x 74.6 mm 43 kg / 50 kg Landscape / Portrait / Portrait Flip English 0C ~ 45C

-20C ~ 60C 10%~80% RH Non-Condensing IN *2 (HDCP) IN *1 IN *1 OUT *1 IN *1 IN *2 IN *1 IN *1 (ESK only) USER INTERFACE OSD Language ENVIRONMENT Fuse 10A Design and specifications are subject to change without notice. 25 Input Mode Active Resolution H Pixels V Lines Refresh Rate 640 720 800 960 1024 1280 1280 1280 1280 1366 1400 1440 1600 1680 1920 1920 1920 1920 2560 3840 480 480 600 600 768 720 768 960 1024 768 1050 900 1200 1050 720 1080 1200 1440 1440 2160 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 26 Pin Assignments RS-232 Input PIN No. NAME 01 02 03 04 05 06 07 08 09 Connected to 7&8 TXD RXD Connected to 6 GND Connected to 4 Connected to 1&8 Connected to 1&7 NC 27 Troubleshooting ISSUE RECOMMENDED SOLUTION No image is displayed. Nothing happens when switching the main switch on. The remote control does not work. Check whether the cable is completely plugged in. Check whether the main switch is in the ON position, and the power cord is completely plugged in. Check whether the image sources resolution is set as the supported format (refer to section Input Mode, p.22). Check whether the cable is damaged or bent excessively. Unplug the power cord from the socket and plug it in again after a few seconds to reset the Signage. Note: Unplugging the power cord will not change the settings. Check whether there are batteries in the remote control. Check the batteries for freshness, polarity, etc. Check whether the remote is in the operation range. Bright light may interfere with the remote control. Please avoid using the remote control near special fluorescent lights or neon lights. Check whether the TIMER setting in the menu is set to Image is unstable. Check whether the cable is completely plugged in. Auto on/off does not work or does not function properly. OFF. Check whether the Power On Time and Power Off Time settings are set correctly. Cannot control the display remotely via RS-232. Check whether the RS-232 cable is connected properly. If you are still having trouble with your DynaScan DS Professional LCD, contact your dealer or DynaScan directly for more assistance. 28 About DSM365 DSM365 is an internal operating system as Android, which can install the applications via USB flash drive storage, SD card or Internet. How to Switch to DSM365 Press the MENU button on either the rear panel control or remote control to show the OSD. Use the navigation arrows to select and adjust the Input Source.

[Input Source DSM365]

Main 29 ITEM DESCRIPTION APPS Show the Installed APPS. 2. About SDM Install SDM on the display 1. Loosen screws and remove the SDM cover from the display. Insert the SDM module into the display and fasten screws. Make sure the SDM properly installed to avoid causing the devise destruction. 30 Switch to SDM Press the MENU button on either the rear panel control or remote control to show the OSD. Use the navigation arrows to select and adjust the Input Source.

[ Input Source Main SDM ]

31 www.dynascandisplay.com Copyright DynaScan Technology, Inc. All Rights Reserved. 32

DS861LR4 USER MANUAL 86 3500 Nits Ultra-High Brightness Digital Signage 66901 | V2.02 Contents Material Contents Declaration ................................................................................................................ 2 Recycling and Energy Information ......................................................................................................... 2 Declaration of Conformity ....................................................................................................................... 3 Dclaration de conformit....................................................................................................................... 4 Safety Precautions ................................................................................................................................. 5 Prcautions relatives la scurit .......................................................................................................... 6 Important Safety Information .................................................................................................................. 7 Informations importantes relatives la scurit ..................................................................................... 8 Getting Started ....................................................................................................................................... 9 Contents ............................................................................................................................................. 9 Installing and Replacing Remote Control Batteries ............................................................................ 9 Bien dbuter ......................................................................................................................................... 10 Contenu ............................................................................................................................................ 10 Mise en place et remplacement des piles de la tlcommande....................................................... 10 Installation............................................................................................................................................. 11 Mounting ........................................................................................................................................... 11 Wall Mounting ................................................................................................................................... 14 Connecting to a Power Source ......................................................................................................... 15 Connecting an External Video Source ............................................................................................. 15 Input / Output Terminals ................................................................................................................... 16 Operating Instructions .......................................................................................................................... 17 Powering On/Off the Display ............................................................................................................ 17

.......................................................................................................................................................... 17 Using the Remote Control ................................................................................................................ 17 Using the built-in keypad .................................................................................................................. 20 Navigating the On Screen Display (OSD) Menu .................................................................................. 21 Specifications ....................................................................................................................................... 26 Input Mode ............................................................................................................................................ 27 Pin Assignments ................................................................................................................................... 28 RS-232 Input .................................................................................................................................... 28 Troubleshooting .................................................................................................................................... 29 About DSM365 ..................................................................................................................................... 30 About SDM ........................................................................................................................................... 31 Install SDM on the display ................................................................................................................ 31 Switch to SDM .................................................................................................................................. 32 1 Material Contents Declaration Hazardous Substances Hexavalent Chromium Biphenyls Polybrominated Polybromodiphenyl Part Name Lead Mercury Cadmium PCBA CHASSIS ACCESSORY Pb O O O O Hg O O O O Cd O O O O Cr6+

O O O O PBB O O O O PACKAGE O indicates that the level of the specified chemical substance is less than the threshold level specified in the standards of SJ/T-11363-2006 and EU 2011/65/EC. indicates that the level of the specified chemical substance exceeds the threshold level specified in the standards of SJ/T-11363-2006 and EU 2011/65/EC. Ethers PBDE O O O O Recycling and Energy Information DynaScan is firmly committed to its environmental protection efforts and we believe that reducing our products impact on the environment is of the utmost importance. We are dedicated to meet the latest environmental protection regulations. Energy usage Mode Normal Energy Consumption Max. 1200W Disposal Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being. When replacing old appliances with new one, the retailer is legally obligated to take back your old appliances for disposal at least for free of charge. 2 Declaration of Conformity FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. CAUTION:

Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Manufacturer Name DynaScan Technology Corp. Manufacturer Address 7F, 66 Huaya 1st Road, Guishan, Taoyuan 33383,Taiwan This device complies with Directive 2014/53/EU issued by the Commission of the European Community. Article 3.1 (a) EN 62368-1:2014/AC:2015 IEC 62368-1 Article 3.2 EN 300328 V2.2.2(2019-07) Article 3.1 (b) EN 55032:2015/AC:2016 Class A EN 61000-3-2:2014 EN 61000-3-3:2013 EN 55035:2017 EN 301489-1 V2.2.0(2017-03) EN 301489-17 V3.2.0(2017-03)

- Frequency bands and Powers a. WIFI 2.4G-2412~2462MHz. b. Maximum radio-frequency power transmitted in the 2.4GHz is 50mW. 3 Dclaration de conformit FCC Cet appareil est conforme la section 15 de la rglementation FCC. Son utilisation est sujette aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interfrence nuisible, et (2) cet appareil doit accepter toute interfrence reue, y compris celles qui peuvent causer un fonctionnement non souhait. D CLARATION DE LA COMMISSION F D RALE DES COMMUNICATIONS Cet quipement a t test et dclar conforme aux limites d'un appareil numrique de classe A, conformment la partie 15 des rgles de la FCC. Ces limites sont conues pour fournir une protection raisonnable contre les interfrences nuisibles lorsque l'quipement est utilis dans un environnement commercial. Cet quipement gnre, utilise et peut mettre de l'nergie de radiofrquence et, s'il n'est pas install et utilis conformment au manuel d'instructions, peut provoquer des interfrences nuisibles aux communications radio. Le fonctionnement de cet quipement dans une zone rsidentielle est susceptible de provoquer des interfrences nuisibles, auquel cas l'utilisateur devra corriger les interfrences ses propres frais. ATTENTION :

Tout changement ou modification, non expressment approuv par le responsable de la conformit, peut rvoquer lautorit de l'utilisateur employer l'appareil en question. Avertissement relatif aux expositions RF Cet appareil doit tre install et utilis en accord avec les instructions fournies et les antennes utilises pour cet metteur doivent tre installes de faon fournir une distance de sparation d'au moins 20 cm par rapport toute personne, et elles ne doivent pas tre co-localises ni opres en conjonction avec d'autres antennes ou metteurs. Les utilisateurs finaux et les installateurs doivent recevoir les instructions d'installation des antennes et les conditions d'utilisation de l'metteur pour satisfaire la conformit aux expositions RF. Nom du fabricant DynaScan Technology Corp. Adresse du fabricant 7F, 66 Huaya 1st Road, Guishan, Taoyuan 33383,Tawan Cet appareil est conforme la directive 2014/53/UE mise par la Commission de la Communaut europenne. L'article 3.1 (a) EN 62368-1:2014/AC:2015 IEC 62368-1 L'article 3.2 EN 300328 V2.2.2(2019-07)

- Bandes de frquences et puissances a. WIFI 2,4G-2412~2462MHz. L'article 3.1 (b) EN 55032:2015/AC:2016 Classe A EN 61000-3-2:2014 EN 61000-3-3:2013 EN 55035:2017 EN 301489-1 V2.2.0(2017-03) EN 301489-17 V3.2.0(2017-03) b. La puissance radiofrquence maximale transmise dans la bande 2,4 GHz est de 50 mW 4 Safety Precautions CAUTION Do not install near flammable material or any heat sources. Do not defeat the safety purpose of the grounding-type plug. Do not disassemble the display to avoid electrical shock or burn. Normal operating condition considers installation at an altitude below 2000m;

some abnormalities may be experienced when installed at an altitude above 2000m. WARNING Please power off the LCD and the video source before plugging in the DP or HDMI cable. Please installed the display in well-ventilated place, do not install in a confined space. Suitable for mounting on concrete or other non-combustible surface only. If it gives off smoke, strange smell, or unusual noise, or when it gets too hot to touch, immediately unplug the display and contact the dealer. Clean only with soft, dry cloth but not use chemical liquids, and unplug while cleaning. Do not use extreme force or any sharp or pointed objects to touch the display. Do not drop or allow any object to fall to the display. Do not operate the display with wet hands to avoid electric shock. Do not discard this product with general household waste. Please be sure to comply with the local waste regulations. This device uses, generates and radiated radio frequency energy. The radio frequency energy produced by this device is well below the maximum exposure allows by Federal Communications Commission (FCC). When a stationary or fixed image is displayed on the screen for a long time, the image may be permanently imprinted on the screen. This phenomenon is known as image burn-in and is not covered by the manufacturer's warranty. In order to avoid burn-in, avoid prolonged display of static or fixed images on the screen. Power supply cord must not be attached to the building surface, nor run through walls, ceilings, floors and similar openings in the building structure. Power cord shall be connected to a socket-outlet with earthing connection. 5 Prcautions relatives la scurit PR CAUTIONS N'installez pas installer proximit de matriaux inflammables ou de sources de chaleur. Ne pas compromettre la scurit de la fiche de mise la terre. Pour viter tout choc lectrique ou la brlure, ne dmontez pas l'cran. Le produit peut normalement tre utilis une altitude infrieure 2000 m. Des anomalies peuvent survenir lors de linstallation de lappareil une altitude suprieure 2000 m. AVERTISSEMENT Veuillez teindre l'cran LCD et la source vido avant de brancher le cble DP ou HDMI. Veuillez installer l'cran dans un endroit bien ventil, pas dans un espace confin. Convient pour le montage sur du bton ou autre surface non combustible uniquement. S'il dgage de la fume, une odeur trange ou un bruit inhabituel, ou s'il est trop chaud au toucher, dbranchez immdiatement l'cran et contactez le revendeur. Nettoyez uniquement avec un chiffon doux et sec, sans utiliser de produits chimiques, et dbranchez-le pendant le nettoyage. N'exercez pas une force excessive et nutilisez pas d'objets tranchants ou pointus pour toucher l'cran. Ne laissez pas tomber lcran et ne laissez aucun objet tomber dessus. Afin dviter tout choc lectrique, n'utilisez pas l'cran avec les mains mouilles. Ne jetez pas ce produit avec les dchets mnagers. Assurez-vous de respecter les rglementations locales en matire de dchets. Cet appareil utilise, gnre et rayonne de lnergie radiofrquence. L'nergie de radiofrquence produite par cet appareil est bien infrieure l'exposition maximale autorise par la FCC (Federal Communications Commission). Lorsqu'une image immobile ou fixe est affiche sur l'cran pendant une longue priode, l'image peut tre imprime de manire permanente sur l'cran. Ce phnomne est connu sous le nom d'image rmanente et n'est pas couvert par la garantie du fabricant. Afin d'viter toute dtrioration, vitez l'affichage prolong d'images statiques ou fixes sur l'cran. Le cordon d'alimentation ne doit pas tre connect la surface du btiment, ni traverser les murs, les plafonds, les planchers et les ouvertures similaires du btiment. Le cordon d'alimentation doit tre connect une prise lectrique mise la terre 6 Important Safety Information Disassembling the LCD is strictly prohibited. Opening the cover may expose the user to electric shock or other hazards. Please contact DynaScan certified service professionals for all maintenance requirements. Do not allow any liquid to enter the LCD. Also avoid placing the LCD close to water sources. Do not place heavy objects on the power cord. A damaged power cord might cause electric shock or fire. Do not bend, twist, or damage the power cord. The power cord must comply with the local safety regulations. Do not damage or modify the prongs/pins and the ground contact on the power cord plug. Do not place the LCD on an unleveled surface or an unstable vehicle. The LCD could fall over and cause substantial damage. Do not cover the vents and/or the heat sink. Do not install the LCD beside radiators or other heat sources. The installation site should have sufficient ventilation so the heat generated by the LCD can be dissipated. Do not use the Signage in a hot, humid, dusty, or fumy environment. Handle the LCD with care. Save the packaging materials for transport later. Clean the LCD backside at least once a month for dust and other particles. Damaged power cord or power plug. If liquid or foreign object has entered the LCD. If the LCD has been exposed to rain or water. If the LCD has been dropped or the casing has become damaged. If any structural damage such as cracks or unnatural vibration is found. If the LCD cannot be operated following the steps outlined in this manual. If the LCD emits smoke or other odors, or generates strange noises. Unplug the LCD immediately and contact a DynaScan certified service professional as soon as possible when any of the following situations occurs:

Operating Suggestions Cleaning the Panel Use a soft, lint-free cloth to gently wipe the dust off from the screen panel. Do not use any hard material to wipe the panel. Do not poke the panel with your hand or any sharp object (such as a pen or a nail) or exert excessive pressure on the panel to prevent any damage. Do not use any cleaning solutions on the panel as it might cause discoloration. Avoid displaying a stationary image for a long period of time in order to prevent image sticking. Unplug the power cord. Cleaning the Casing Gently wipe the casing with a soft cloth. Attention Do not use any of the following solutions to clean the casing as they may damage the paint and cause it to crack or peel: benzene solution, alkaline solution, alcohol-based cleaning solution, glass cleaner, wax, polisher, or detergent. Stability Hazard or equivalent wording;

The monitor set may fall, causing serious personal injury or death or equivalent text;

The following or equivalent text:

To prevent injury, this monitor set must be securely attached to the floor/wall in accordance with the installation instructions. 7 Informations importantes relatives la scurit Le dmontage de l'cran LCD est strictement interdit. L'ouverture du capot peut exposer l'utilisateur un choc lectrique ou d'autres dangers. Veuillez contacter des professionnels de service certifis DynaScan pour tous les besoins de maintenance. Ne laissez aucun liquide pntrer dans l'cran LCD. vitez galement de placer lcran LCD proximit de sources deau. Ne placez aucun objet lourd sur le cordon d'alimentation. Un cordon d'alimentation endommag peut provoquer un choc lectrique ou un incendie. Ne pliez pas, ne tordez pas et n'endommagez pas le cordon d'alimentation. Le cordon d'alimentation doit tre conforme aux rglementations locales de scurit. Veillez ne pas endommager ni modifier les broches ou le contact de terre sur la fiche du cordon d'alimentation. Ne placez pas l'cran LCD sur une surface qui nest pas de niveau ou sur un vhicule instable. Lcran LCD pourrait tomber et causer des dgts importants. Ne couvrez pas les orifices de ventilation et / ou le dissipateur de chaleur. N'installez pas l'cran LCD ct de radiateurs ou d'autres sources de chaleur. Le site d'installation doit disposer d'une ventilation suffisante pour que la chaleur gnre par l'cran LCD puisse tre dissipe. N'utilisez pas l'affichage signaltique dans un environnement chaud, humide, poussireux ou enfum. Manipulez lcran LCD avec soin. Conservez les matriaux d'emballage pour tout transport ultrieur. Nettoyez larrire de lcran LCD au moins une fois par mois afin dliminer la poussire et autres particules. Dbranchez immdiatement l'cran LCD et contactez un rparateur professionnel certifi DynaScan ds que possible lorsque l'une des situations suivantes se produit :

Cordon d'alimentation ou fiche d'alimentation endommag. Si du liquide ou un corps tranger est entr dans l'cran LCD. Si lcran LCD a t expos la pluie ou l'eau. Si lcran LCD est tomb ou si le botier a t endommag. Si vous constatez des dommages structurels comme des fissures ou des vibrations non naturelles. Si lcran LCD ne peut pas tre utilis en suivant les tapes dcrites dans le prsent manuel. Si l'cran LCD met de la fume ou d'autres odeurs, ou gnre des bruits tranges. Suggestions dutilisation Nettoyage du panneau vitez d'afficher une image immobile pendant une priode prolonge afin d'viter que la rmanence dimage. Utilisez un chiffon doux non pelucheux pour essuyer dlicatement la poussire du panneau de l'cran. N'utilisez aucun matriau dur pour essuyer le panneau. Afin dviter tout dommage, nappuyez pas sur le panneau avec votre main ou un objet pointu

(comme un stylo ou un ongle) et n'exercez pas de pression excessive sur le panneau. N'utilisez aucune solution de nettoyage sur le panneau car cela pourrait provoquer une dcoloration. Danger de stabilit ou libell quivalent;

Le moniteur peut tomber, entranant des blessures graves ou mortelles ou texte quivalent;

Le texte suivant ou quivalent:

Pour viter les blessures, ce moniteur doit tre solidement fix au sol / mur conformment aux instructions d'installation. 8 Getting Started Contents Confirm that the accessories below are shipped along with the display. If any item is missing, please contact your dealer. The color and shape of the accessories may vary with the products. DS861LR4 Professional LCD. Remote Control x 1 pc. Batteries (1.5V / AAA) x2 pcs. Power cable x1 pc. Quick Start Guide x1 pc. ESK302 x1 pc. Attention: Please use the following table to check whether the included power cord is suitable for your region. If the power cord does not match your region, please contact your local supplier. Please use matching AC socket in order to meet your local safety regulations. North America European Continental Japan Taiwan Plug Type Plug Shape Voltage NEMA TYPE IEC Display Plug IEC Plug TYPE Region U.S.A. / Canada 120V NEMA 5-15 EU

(Except U.K.) 230V CEE 7/7 Japan 100V Taiwan 110V NEMA 1-15 NEMA 5-15 IEC320 C13 Insert 2 new AAA batteries. Installing and Replacing Remote Control Batteries 1. Open the battery compartment cover. 2. 3. Close the battery compartment cover. Warning:

Incorrect usage of batteries may cause leakage or explosion. Pay attention to the polarity when installing the batteries. Do not mix different types of batteries or new and used batteries. Doing so may shorten the battery life or cause leakage. Remove or replace the batteries when they are empty in order to prevent acid leaking in the battery compartment. Do not touch the leaked substance from the batteries in case of a battery leakage. Doing so may hurt human skin. Note: If the remote control is not going to be used for a long time, we recommend removing the batteries from the remote control. 9 Bien dbuter Contenu Vrifiez que les accessoires ci-dessous sont fournis avec lcran. Si l'un d'eux est manquant, veuillez contacter immdiatement votre revendeur. La couleur et la forme des accessoires peuvent varier selon les produits. cran LCD DS861LR4 Professional. Tlcommande x 1 Piles (1,5V / AAA) x 2 Cble d'alimentation x 1 Guide de dmarrage rapide x 1 ESK302 x 1 Attention : Veuillez utiliser le tableau suivant afin de vrifier que le cordon dalimentation fourni est adapt votre rgion. Si le cordon d'alimentation ne correspond pas votre rgion, veuillez contacter votre fournisseur local. Veuillez utiliser la prise secteur correspondante afin de respecter les rglementations locales de scurit. Type de fiche Amrique du Nord Europe continentale Japon Tawan Forme de la fiche Rgion Tension TYPE NEMA Fiche daffichage TYPE fiche CEI CEI tats-Unis /

Canada 120V NEMA 5-15 UE

(Hors R.-U.) 230V CEE 7/7 Japon 100V Tawan 110V NEMA 1-15 NEMA 5-15 IEC320 C13 Insrez 2 nouvelles piles AAA. Mise en place et remplacement des piles de la tlcommande 1. Ouvrez le couvercle du logement piles. 2. 3. Fermez le couvercle du logement piles. Avertissement :

Une mauvaise utilisation des piles peut provoquer des fuites ou une explosion. Faites attention la polarit lors de l'installation des piles. Ne mlangez pas diffrents types de piles ou des piles neuves et usages. Cela pourrait raccourcir la dure de vie des piles ou causer des fuites. Retirez ou remplacez les piles lorsqu'elles sont vides afin d'viter toute fuite d'acide dans le logement piles. Ne touchez pas la substance qui scoule des piles en cas de fuite. Cela pourrait blesser la peau. Remarque : Si la tlcommande ne doit pas tre utilise pendant une priode prolonge, nous vous recommandons den retirer les piles. 10 Installation The LCD must be properly installed using a wall mount. Incorrect installation may cause injury or damage the equipment. Product warranty does not cover the damage caused by improper installation and DynaScan shall not be held responsible in such incident. Refer to the mount manufacturers instructions for proper installation. Mounting Hanging the Professional LCD from the ceiling or mounting it on the wall is the responsibility of the user. Not all ceilings or walls provide enough strength to support the LCD. The LCD may drop and cause serious injury if it is hanging from the ceiling with insufficient support or is mounted on a slanted wall. Product warranty does not cover improper installation, modification, or damage caused by natural disasters. DynaScan recommends having certified professionals to evaluate the installation site and perform the mounting operation. Do not to cover the vent and/or the heat sink in order to ensure proper heat dissipation. Refer to the installation guide provided by the manufacturer for proper mounting. When mounting on a wall or hanging from a ceiling A wall mount is not included in the accessory. Please purchase a VESA Standard wall mount to secure the LCD. DynaScan is not responsible for the damage caused by using non-standard wall mounts. Verify that the mounting location can support the weight of the LCD before installation. The installation angle must be within 15 degrees of the vertical axis. Do not install the wall mount while the power is turned on as it may cause serious injury due to electrical shock. Model VESA (mm) Screw Length Number Screw Specification DS861LR4

(A * B) 400 * 600 M6 4 Greater than 10mm Smaller than 12mm

(not including wall mount thickness) Unit: mm 11 A B Orientation When used in the portrait orientation, the LCD should be rotated clockwise when looking at the front of the display such that the left edge becomes the top edge. Portrait mode: Rotate the set clockwise 90 (mandatory)

<Front>

12 Portrait mode: Rotate the set counterclockwise 90 (mandatory)

<Rear>

The orientation sticker can be found on the rear of display, which is for distinguishing the direction of installation. Installation Location The wall and mount must have enough strength to support the LCD and its accessories. Do not install in a location with strong vibrations or dusty. Do not install near the buildings main electric panel. Ensure the LCD is secured in such a manner that it cannot be easily removed by the general public. Leave clearance around the outer edge of the LCD (or video wall matrix) from other objects to ensure proper ventilation. For installations with screens inset into the wall, refer to section: Enclosures for cooling and ventilation considerations. Single display 13 Maintenance Inspect the fasteners regularly for signs of loosening or deformation. Please perform appropriate corrective measures when a problem is identified. Neglecting the problem may worsen the situation. Increase the inspection frequency on areas where previous maintenance had occurred to ensure the problems do not occur again. Wall Mounting A wall mount is not included. Please purchase a VESA Standard wall mount to secure the LCD. DynaScan is not responsible for damages caused by using non-standard wall mounts. Verify that the mounting location can support the weight of the LCD before installation. The installation angle must be within 15 degrees of the vertical axis. Do not install the wall mount while the power is turned on as it may cause serious injury from electrical shock. 15 14 Connecting to a Power Source Using the power cable provided, plug it in the power inlet on the side of the display shown in the diagram below. Connect the power cable to a 100-240 volt, 50 / 60Hz AC power outlet. Insert the plug completely into the socket. A loose power connection may cause damage to the display and/or lead to a fire hazard. Connecting an External Video Source Turn OFF the power of both LCD and external video device. Using the DP cable (or HDMI cable), insert one end into the DP-IN (or HDMI 1-IN, HDMI 2-IN) which shown in the diagram below. Connect the other end of the DP cable (HDMI cable) to the DP output (or HDMI output) of the video source. Refer to your video devices manual for additional information. 15 Input / Output Terminals A. RJ-45 1 (IN): RJ45 network input connection. B. RJ-45 2 (IN): RJ45 network input connection. C. RS-232 (IN): RS232C network input connection for remote control from PC. D. HDMI 1 (IN): Connect the HDMI output of a PC or an AV device via a HDMI cable. E. HDMI 2 (IN): Connect the HDMI output of a PC or an AV device via a HDMI cable. F. DP (IN): Connect the DP output of a PC or an AV device via a DP cable. G. USB 3.0 port: Support for USB flash drive storage, mouse and keyboard. H. Extension Connector: Extension Connector for optional IR Extension sensor kit (ESK302). I. Micro SD card: Support for up to 128GB, FAT32 format is supported. J. Thermal: Extension Connector for optional Extension thermal kit (ETK203). K. Audio (OUT): Connect the audio signal output from Audio IN jack to an external AV device. L. SDM Slot: Install SDM, please refer to P.27 M. AC (IN): Connect the supplied power cord to the wall outlet. N. Power Switch: Press to switch the main power on/off. B F D J H L N A C E G I K M 16 Operating Instructions Powering On/Off the Display To turn on/off the display, press the power switch on the side of the display as shown in the diagram below. NOTE: The remote control only works when the power switch is ON. Using the Remote Control ON OFF 17 Connection using an External Sensor Kit (ESK302) Connect the ESK302 cable to the mini USB port on the side of the display, and aim the remote at the IR receiver as shown below. Meanwhile, the IR receiver on the display will be disabled. The operating range of the remote control is 2.5 meters (8 feet). NOTE: Ambient light may affect the performance of the remote control. Avoid fluorescent or neon lights in the vicinity. 18

*Color and shape may vary by model. ITEM DESCRIPTION POWER MENU UP LEFT RIGHT DOWN OK BACK Power On / Off OSD On / Off Move the cursor up or change the setting of selected item. Exit the current selection. Select the highlighted item. Move the cursor down or change the setting of selected item. Enter (for DSM365 only) Return to the last page. (for DSM365 only) 19 Using the built-in keypad ITEM MENU UP DOWN LEFT RIGHT DESCRIPTION OSD On / Off, Power On / Off. Move the cursor up or change the setting of selected item. Move the cursor down or change the setting of selected item. Exit the current selection. Select the highlighted item. 20 Navigating the On Screen Display (OSD) Menu Press the MENU button on the built-in keypad or remote control to show the OSD. Use the navigation arrows to select and adjust the menu items.

*The change of each setting can only enable when you press LEFT (refer to p.15) to back to the last menu layer. 1. Input Source ITEM 1 ITEM 2 DEFAULT DESCRIPTION Input Source Main Failover 1 Failover 2 Failover 3 Failover 4 HDMI 1 HDMI 2 DP DSM365 SDM Set the Main input to display. Set the Failover 1 input to display. Set the Failover 2 input to display. Set the Failover 3 input to display. Set the Failover 4 input to display. 2. Picture ITEM 1 ITEM 2 DEFAULT DESCRIPTION Color Temperature USER 2 Picture Red Green Select the color temperature. (User2, User1, D93, D65 and D55). Adjust the red light level. Range 0 100. Note: The feature is only supported on User2 mode. Adjust the green light level. Range 0 100. 21 3. Time Blue Contrast Gamma 60 2.4 Black Level Auto Note: The feature is only supported on User2 mode. Adjust the blue light level. Range 0 100. Note: The feature is only supported on User2 mode. Adjust the contrast level. Range 0 100. Adjusts the Gamma value. (Native, 2.2, 2.4 and sGamma) Selects the black level to adjust the screen gray scale. "Limited" for video source uses 16 to 235 levels for R/G/B, such as HDMI.

"RGB Full" for video source uses all levels from 0 to 255 levels.

"Auto" is for detecting the video source to determine its value is applicable for

"Limited" or "RGB Full". ITEM 1 ITEM 2 DEFAULT DESCRIPTION Current Date YYYY:MM:DD Set the date. Time Set the clock. Note: The internal clock will continue to function when the power is turned off. GMT+00:00 Set the day of week. (Monday to Sunday) Set the Time Zone. Automatic power on / off schedule function. Current Time HH:MM:SS Day of Week Time Zone Power Control Timer Power On Time Power Off Time Off 00:00 00:00 Set turn-on time. Set turn-off time. 22 ITEM 1 ITEM 2 DEFAULT DESCRIPTION 4. Backlight Auto Brightness Off Backlight High Level Low Level 100 20 High Level Time Low Level Time 00:00 00:00 Local Dimming Local Dimming 2 A. If the AUTO BRIGHTNESS is Off, the screen brightness will remain at HIGH LEVEL brightness value. B. If the AUTO BRIGHTNESS is Auto, the brightness of display will be adjusted according to the ambient light. When ambient light is bright, the screen will adjust to the High Level brightness value set; when ambient light is dark, the screen will adjust to the Low Level brightness value set. C. When the Timer (High Level Time &

Low Level Time) mode is set, the display will automatically switch the brightness according to the time set. D. When setting Mix mode, Timer and Light sensor will work at this mode. For example, setting "High Level Time = 8:00am" and "Low Level Time

= 6:00pm", the light sensor will detect environment brightness and then display will adjust the value of High Level during 8:00am and 6:00pm. Adjusts the highest brightness level. Range 0 100. Adjusts the lowest brightness level. Range 0 100. Set high level time. Set low level time. Adjusts the contrast. UDR1~3 is the highest contrast. Local Dimming 1 is the lowest contrast.

(Local Dimming 1, Local Dimming 2, UDR1, UDR2 and UDR3) 23 5. Advance ITEM 1 ITEM 2 DEFAULT DESCRIPTION Display Mode Portrait Screen Protection Off IR Control On Power Off Mode Standby Advance AC Back Status Power On Volume 50 Reset Default Setting Off Change the Menu orientation. The Menu can be displayed in either LANDSCAPE or PORTRAIT mode. Turn on / off image burn-in protection. Set image burn-in protection interval. Range 0 100 minutes. Enable/disable the remote control for Menu. Note: When disabled, the remote control function can be enabled again from the control panel on the display or through the DynaScan Display Manager application. When in Power Off Mode, RS-232 controls do not function. Only [Main Power Switch] on the display or [Power Button] on the remote control can wake up the display. Choose to use the AC back status function. Power On: Display booting up when the power back after an outage. Standby: Display keeps soft-off status when the power back after an outage. Memory: Display will back to the last state when the power back after an outage. Set volume. Range 100 0. Restore all settings to default. Note: It does not modify CURRENT DATE, CURRENT TIME, DATE OF WEEK, TIME ZONE, POWER ON TIME and POWER OFF TIME. 24 6. Information ITEM 1 ITEM 2 DEFAULT DESCRIPTION Resolution Input resolution. Model DS861LR4 The displays model. Serial Number The displays serial number. Information Hardware Firmware Cabinet Temp. ETK Temp. Humidity ALS Level The H/W version. The F/W version. LCD inner (backlight unit) temperature monitoring. The Extension Thermal Kit (ETK203) is for ambient temperature monitoring. LCD inner (backlight unit) humidity monitoring. The brightness of ambience monitoring.

(Ambience Light Sensor) Some functions may not be available for all models.

*Adjusted value: Each R/G/B value for this product has been individually adjusted during production to a preset color temperature of 6500K. 25 Specifications MODEL CODE PANEL POWER MECHANICAL SPECS ENVIRONMENT I/O Ports LCD Panel Size Native Resolution Brightness Contrast Ratio Response Time Viewing Angle Life Time Panel Surface Power Supply Rated Voltage Power On Mode Bezel Width (T/B/L/R) Cabinet Color Monitor Dimension (LxHxD) Monitor Weight (set /

package) Orientation Operation Temperature Storage Temperature Humidity HDMI DP RS-232 Audio USB port RJ-45 Micro SD card Mini USB DS861LR4 85.6 inches 3840 x 2160 3500 cd/m (Typ.) 3,000:1 8 ms (Typ.) 178/ 178 100,000 hrs (Typ.) AG Haze 3%, 2H Internal 100 - 240V, 50 / 60Hz Typ. 750W / Max. 1200W 17.8/17.8/17.8/17.8 mm Black 1935.8 x 1106.8 x 79.0 mm 70 kg / 90 kg Landscape / Portrait 0C ~ 45C

-20C ~ 60C 10%~80% RH Non-Condensing IN *2 (HDCP) IN *1 IN *1 OUT *1 IN *1 IN *2 IN *1 IN *1 (ESK only) USER INTERFACE OSD Language English Fuse 16A Design and specifications are subject to change without notice. 26 Input Mode Active Resolution H Pixels V Lines Refresh Rate 480 480 600 600 768 720 768 960 1024 768 1050 900 1200 1050 720 1080 1200 1440 1440 2160 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 640 720 800 960 1024 1280 1280 1280 1280 1366 1400 1440 1600 1680 1920 1920 1920 1920 2560 3840 27 Pin Assignments RS-232 Input PIN No. NAME 01 02 03 04 05 06 07 08 09 Connected to 7&8 TXD RXD Connected to 6 GND Connected to 4 Connected to 1&8 Connected to 1&7 NC 28 Troubleshooting ISSUE RECOMMENDED SOLUTION No image is displayed. Nothing happens when switching the main switch on. The remote control does not work. Check whether the cable is completely plugged in. Check whether the main switch is in the ON position, and the power cord is completely plugged in. Check whether the image sources resolution is set as the supported format (refer to section Input Mode, p.23). Check whether the cable is damaged or bent excessively. Unplug the power cord from the socket and plug it in again after a few seconds to reset the Signage. Note: Unplugging the power cord will not change the settings. Check whether there are batteries in the remote control. Check the batteries for freshness, polarity, etc. Check whether the remote is in the operation range. Bright light may interfere with the remote control. Please avoid using the remote control near special fluorescent lights or neon lights. Check whether the TIMER setting in the menu is set to Image is unstable. Check whether the cable is completely plugged in. Auto on/off does not work or does not function properly. OFF. Check whether the Power On Time and Power Off Time settings are set correctly. Cannot control the display remotely via RS-232. Check whether the RS-232 cable is connected properly. If you are still having trouble with your DynaScan DS Professional LCD, contact your dealer or DynaScan directly for more assistance. 29 About DSM365 DSM365 is an internal operating system as Android, which can install the applications via USB flash drive storage, SD card or Internet. How to Switch to DSM365 Press the MENU button on either the rear panel control or remote control to show the OSD. Use the navigation arrows to select and adjust the Input Source.

[Input Source DSM365]

Main 30 ITEM DESCRIPTION APPS Show the Installed APPS. About SDM Install SDM on the display 1. Loosen screws and remove the SDM cover from the display. Insert the SDM module into the display and fasten screws. Make sure the SDM properly installed to avoid causing the devise destruction. 2. 31 Switch to SDM Press the MENU button on either the rear panel control or remote control to show the OSD. Use the navigation arrows to select and adjust the Input Source.

[ Input Source Main SDM ]

32 www.dynascandisplay.com Copyright DynaScan Technology, Inc. All Rights Reserved. 33

User Manual Android Control Board For With Wireless module Product

.Digital Transmission System Model No.XBP301 This user manual pertains to Android player main board with wireless module, the main board can be assembled in the Android based Advertising Media player, listed as below Model Model Description 65Monitor 86Monitor Description 66502 66901 Item Storage WIFI Ethernet Specifications Display Output HDMI*2, DP*1 USB Input USB Type A*1 Card Reader Micro SD Card Slot*1 Power Input 12V/3A6 pin header LED Indicator GreenPower on Internet Browser Google Chrome Internal16GB NAND Flash, ExternalMicro SD Card 802.11 b/g/n RJ45, 10/100Mbps Fast Ethernet Video Format JPG H.264, H.263, DIVX, ON2VP, Mpeg1, Speak, Mpeg4, VC-1, WMV9, MPEG2, Real video, SVC Image Format BMP, JPG, TIF, PNG, GIF Music Format MP3, WAV, WMA PCBA Dimension200 x 150 mm Assemble methodThe module will be screwed on the housing and used as a main board for Android based Advertising Media Player. Input port 1pc Power jack for +5V/2A power input 1pc USB Type A for USB mouse 1pc Antenna connector for 2.4G WiFi network Hardware interface WIFI pin location and description PIN SYMBOL DESCRIPTION PIN SYMBOL DESCRIPTION 1 NC 2 NC 3 NC 4 NC 5 GND 6 WL_USB_DP 7 WL_USB_DN 8 GND 9 NC Not Connect Not Connect Not Connect Not Connect GND USB D+

USB D-

GND Not Connect 17 BT_SYNC_IN 18 GND 19 NC 20 GND 21 GND 22 NC 23 GND 24 GND 25 GND 10 NC Not Connect 26 WLAN_WAKE_HOST 11 GND GND 27 NC 12 NC Not Connect 28 CHIP_EN 13 GND 14 BT_WAKE_HOST GND BT CHIP 29 GND 30 VDD33 15 NC 16 NC WAKES UP HOST Not Connect Not Connect 31 NC 32 GND GND GND GND GND GND GND GND 3.3V WLAN CHIP WAKES UP HOST Shutdown CHIP Internal 47K pull up to 3.3V, low level active Not Connect GND FCC Statement FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. CAUTION Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. End Product Labeling The end product shall bear the following 15.19 statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This transmitter module is authorized only for use in device where the antenna may be installed such that 20cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following:

Contains FCC ID: 2AKWYXBP301 This module is intended under the following conditions 1. This module is certified pursuant to Part 15 rules section(15.247). 2. This module is limited to host model number: 66502, 66901 / Brand: DynaScan 3. This module has been approved to operate with the antenna types listed below, with the maximum permissible gain indicated. Frequency Band Antenna Type Gain(dBi) 2400-2483.5MHz PIFA 0.87 Information on test modes and additional testing requirements This module is restricted to integration into hosts for indoor use only. Be limited the operation channels in channel 1-11 for 2.4GHz band. The separate approval is required for all other operating configurations, including portable configurations with respect to Part 2.1093 and different antenna configurations. The information on how to configure test modes for host product evaluation for different operational conditions for a stand-alone modular transmitter in a host, versus with multiple, simultaneously transmitting modules or other transmitters in a host can be found at KDB Publication 996369 D04. Additional testing, Part 15 Subpart B disclaimer Appropriate measurements (e.g. 15B compliance) and if applicable additional equipment authorizations (e.g. SDoC) of the host product to be addressed by the integrator/manufacturer. This module is only FCC authorized for the specific rule part 15.247 listed on the grant, and the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host product as being Part 15 Subpart B compliant. The user manual of the end product should include This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. other antenna or transmitter. This device and its antenna(s) must not be co-located or operating in conjunction with any For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. Name: DynaScan Technology, Inc. Address: 7 Chrysler, Irvine, CA 92618, USA Office: +1 949.421.0348 https://www.dynascandisplay.com

DS752LT5 USER MANUAL 75 Clean Back Digital Signage 64606 | V2.01 Contents Material Contents Declaration ........................................................................................................... 1 Recycling and Energy Information..................................................................................................... 1 Declaration of Conformity.................................................................................................................. 2 Dclaration de conformit ................................................................................................................. 3 Safety Precautions............................................................................................................................ 4 Prcautions relatives la scurit ..................................................................................................... 5 Important Safety Information ............................................................................................................. 6 Informations importantes relatives la scurit ................................................................................. 7 Getting Started.................................................................................................................................. 8 Contents ....................................................................................................................................... 8 Installing and Replacing Remote Control Batteries ........................................................................ 8 Bien dbuter ..................................................................................................................................... 9 Contenu ........................................................................................................................................ 9 Mise en place et remplacement des piles de la tlcommande ...................................................... 9 Installation .......................................................................................................................................11 Mounting......................................................................................................................................11 Wall Mounting ..............................................................................................................................14 Connecting to a Power Source .....................................................................................................14 Connecting an External Video Source ..........................................................................................15 Input / Output Terminals...............................................................................................................16 Operating Instructions ......................................................................................................................17 Powering On/Off the Display ........................................................................................................17 Using the Remote Control ............................................................................................................18 Using the built-in keypad ..............................................................................................................20 Navigating the On Screen Display (OSD) Menu ...............................................................................21 Specifications...................................................................................................................................26 Input Mode.......................................................................................................................................27 Pin Assignments ..............................................................................................................................28 RS-232 Input................................................................................................................................28 Troubleshooting ...............................................................................................................................29 About DSM365 ................................................................................................................................30 0 Material Contents Declaration Hazardous Substances Hexavalent Chromium Biphenyls Polybrominated Polybromodiphenyl Part Name Lead Mercury Cadmium PCBA CHASSIS ACCESSORY Pb O O O O Hg O O O O Cd O O O O Cr6+

O O O O PBB O O O O Ethers PBDE O O O O PACKAGE O indicates that the level of the specified chemical substance is less than the threshold level specified in the standards of SJ/T-11363-2006 and EU 2005/618/EC.

indicates that the level of the specified chemical substance exceeds the threshold level specified in the standards of SJ/T-11363-2006 and EU 2005/618/EC. Recycling and Energy Information DynaScan is firmly committed to its environmental protection efforts and we believe that reducing our products impact on the environment is of the utmost importance. We are dedicated to meet the latest environmental protection regulations. Energy usage Mode Normal Standby Energy Consumption Max. 800 W

< 1 W Disposal Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being. When replacing old appliances with new one, the retailer is legally obligated to take back your old appliances for disposal at least for free of charge. DS752LT5 User Manual 1 Declaration of Conformity FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. CAUTION:

Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Manufacturer Name DynaScan Technology Corp. Manufacturer Address 7F, 66 Huaya 1st Road, Guishan, Taoyuan 33383,Taiwan This device complies with Directive 2014/53/EU issued by the Commission of the European Community. Article (a) EN 62368-1:2014+A11:2017 IEC 62368-1 Article (b) EN 55032:2015/AC:2016 Class A EN 61000-3-2:2014 EN 61000-3-3:2013 EN 55035:2017 EN 301 489-1 V2.2.0 (2017-03) Class A EN 301 489-17 V3.2.0 (2017-03)

- Frequency bands and Powers a. WIFI 2.4G-2412~2462MHz. b. Maximum radio-frequency power transmitted in the 2.4GHz is 50mW. DS752LT5 User Manual 2 Dclaration de conformit FCC Cet appareil est conforme la section 15 de la rglementation FCC. Son utilisation est sujette aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interfrence nuisible, et (2) cet appareil doit accepter toute interfrence reue, y compris celles qui peuvent causer un fonctionnement non souhait. DCLARATION DE LA COMMISSION FDRALE DES COMMUNICATIONS Cet quipement a t test et dclar conforme aux limites d'un appareil numrique de classe A, conformment la partie 15 des rgles FCC. Ces limites sont conues pour fournir une protection raisonnable contre les interfrences nuisibles lorsque l'quipement est utilis dans un environnement commercial. Ce l'quipement gnre, utilise et peut mettre de l'nergie radiofrquence et, s'il n'est pas install et utilis conformment au manuel d'instructions, peut provoquer des interfrences nuisibles aux communications radio. Le fonctionnement de cet quipement dans une zone rsidentielle est susceptible de provoquer des interfrences nuisibles, auquel cas l'utilisateur devra corriger les interfrences ses propres frais. ATTENTION :

Tout changement ou modification, non expressment approuv par le responsable de la conformit, peut rvoquer lautorit de l'utilisateur employer l'appareil en question. Avertissement relatif aux expositions RF Cet appareil doit tre install et utilis en accord avec les instructions fournies et les antennes utilises pour cet metteur doivent tre installes de faon fournir une distance de sparation d'au moins 20 cm par rapport toute personne, et elles ne doivent pas tre co-localises ni opres en conjonction avec d'autres antennes ou metteurs. Les utilisateurs finaux et les installateurs doivent recevoir les instructions d'installation des antennes et les conditions d'utilisation de l'metteur pour satisfaire la conformit aux expositions RF. Nom du fabricant DynaScan Technology Corp. Adresse du fabricant 7F, 66 Huaya 1st Road, Guishan, Taoyuan 33383,Tawan Cet appareil est conforme la directive 2014/53/UE mise par la Commission de la Communaut europenne. L'article (a) EN 62368-1:2014+A11:2017 IEC 62368-1 L'article (b) EN 55032:2015/AC:2016 Class A EN 61000-3-2:2014 EN 61000-3-3:2013 EN 55035:2017 EN 301 489-1 V2.2.0 (2017-03) Class A EN 301 489-17 V3.2.0 (2017-03)

- Bandes de frquences et puissances a. WIFI 2,4G-2412~2462MHz. b. La puissance radiofrquence maximale transmise dans la bande 2,4 GHz est de 50 mW DS752LT5 User Manual 3 Safety Precautions CAUTION Do not install near flammable material or any heat sources. Do not defeat the safety purpose of the grounding-type plug. Do not disassemble the display to avoid electrical shock or burn. Normal operating condition considers installation at an altitude below 2000m;

some abnormalities may be experienced when installed at an altitude above 2000m. WARNING Please power off the LCD and the video source before plugging in the DP or HDMI cable. Please installed the display in well-ventilated place, do not install in a confined space. Suitable for mounting on concrete or other non-combustible surface only. If it gives off smoke, strange smell, or unusual noise, or when it gets too hot to touch, immediately unplug the display and contact the dealer. Clean only with soft, dry cloth but not use chemical liquids, and unplug while cleaning. Do not use extreme force or any sharp or pointed objects to touch the display. Do not drop or allow any object to fall to the display. Do not operate the display with wet hands to avoid electric shock. Do not discard this product with general household waste. Please be sure to comply with the local waste regulations. This device uses, generates and radiated radio frequency energy. The radio frequency energy produced by this device is well below the maximum exposure allows by Federal Communications Commission (FCC). When a stationary or fixed image is displayed on the screen for a long time, the image may be permanently imprinted on the screen. This phenomenon is known as image burn-in and is not covered by the manufacturer's warranty. In order to avoid burn-in, avoid prolonged display of static or fixed images on the screen. Power supply cord must not be attached to the building surface, nor run through walls, ceilings, floors and similar openings in the building structure. Power cord shall be connected to a socket-outlet with earthing connection. DS752LT5 User Manual 4 Prcautions relatives la scurit PRCAUTIONS N'installez pas installer proximit de matriaux inflammables ou de sources de chaleur. Ne pas compromettre la scurit de la fiche de mise la terre. Pour viter tout choc lectrique ou la brlure, ne dmontez pas l'cran. Le produit peut normalement tre utilis une altitude infrieure 2000 m. Des anomalies peuvent survenir lors de linstallation de lappareil une altitude suprieure 2000 m. AVERTISSEMENT Veuillez teindre l'cran LCD et la source vido avant de brancher le cble DP ou HDMI. Veuillez installer l'cran dans un endroit bien ventil, pas dans un espace confin. Convient pour le montage sur du bton ou autre surface non combustible uniquement. S'il dgage de la fume, une odeur trange ou un bruit inhabituel, ou s'il est trop chaud au toucher, dbranchez immdiatement l'cran et contactez le revendeur. Nettoyez uniquement avec un chiffon doux et sec, sans utiliser de produits chimiques, et dbranchez-le pendant le nettoyage. N'exercez pas une force excessive et nutilisez pas d'objets tranchants ou pointus pour toucher l'cran. Ne laissez pas tomber lcran et ne laissez aucun objet tomber dessus. Afin dviter tout choc lectrique, n'utilisez pas l'cran avec les mains mouilles. Ne jetez pas ce produit avec les dchets mnagers. Assurez-vous de respecter les rglementations locales en matire de dchets. Cet appareil utilise, gnre et rayonne de lnergie radiofrquence. L'nergie de radiofrquence produite par cet appareil est bien infrieure l'exposition maximale autorise par la FCC (Federal Communications Commission). Lorsqu'une image immobile ou fixe est affiche sur l'cran pendant une longue priode, l'image peut tre imprime de manire permanente sur l'cran. Ce phnomne est connu sous le nom d'image rmanente et n'est pas couvert par la garantie du fabricant. Afin d'viter toute dtrioration, vitez l'affichage prolong d'images statiques ou fixes sur l'cran. Le cordon d'alimentation ne doit pas tre connect la surface du btiment, ni traverser les murs, les plafonds, les planchers et les ouvertures similaires du btiment. Le cordon d'alimentation doit tre connect une prise lectrique mise la terre DS752LT5 User Manual 5 Important Safety Information Disassembling the LCD is strictly prohibited. Opening the cover may expose the user to electric shock or other hazards. Please contact DynaScan certified service professionals for all maintenance requirements. Do not allow any liquid to enter the LCD. Also avoid placing the LCD close to water sources. Do not place heavy objects on the power cord. A damaged power cord might cause electric shock or fire. Do not bend, twist, or damage the power cord. The power cord must comply with the local safety regulations. Do not damage or modify the prongs/pins and the ground contact on the power cord plug. Do not place the LCD on an unleveled surface or an unstable vehicle. The LCD could fall over and cause substantial damage. Do not cover the vents and/or the heat sink. Do not install the LCD beside radiators or other heat sources. The installation site should have sufficient ventilation so the heat generated by the LCD can be dissipated. Do not use the Signage in a hot, humid, dusty, or fumy environment. Handle the LCD with care. Save the packaging materials for transport later. Clean the LCD backside at least once a month for dust and other particles. Damaged power cord or power plug. If liquid or foreign object has entered the LCD. If the LCD has been exposed to rain or water. If the LCD has been dropped or the casing has become damaged. If any structural damage such as cracks or unnatural vibration is found. If the LCD cannot be operated following the steps outlined in this manual. If the LCD emits smoke or other odors, or generates strange noises. Unplug the LCD immediately and contact a DynaScan certified service professional as soon as possible when any of the following situations occurs:

Operating Suggestions Cleaning the Panel Use a soft, lint-free cloth to gently wipe the dust off from the screen panel. Do not use any hard material to wipe the panel. Do not poke the panel with your hand or any sharp object (such as a pen or a nail) or exert excessive pressure on the panel to prevent any damage. Do not use any cleaning solutions on the panel as it might cause discoloration. Avoid displaying a stationary image for a long period of time in order to prevent image sticking. Unplug the power cord. Cleaning the Casing Gently wipe the casing with a soft cloth. Attention Do not use any of the following solutions to clean the casing as they may damage the paint and cause it to crack or peel: benzene solution, alkaline solution, alcohol-based cleaning solution, glass cleaner, wax, polisher, or detergent. DS752LT5 User Manual 6 Informations importantes relatives la scurit Le dmontage de l'cran LCD est strictement interdit. L'ouverture du capot peut exposer l'utilisateur un choc lectrique ou d'autres dangers. Veuillez contacter des professionnels de service certifis DynaScan pour tous les besoins de maintenance. Ne laissez aucun liquide pntrer dans l'cran LCD. vitez galement de placer lcran LCD proximit de sources deau. Ne placez aucun objet lourd sur le cordon d'alimentation. Un cordon d'alimentation endommag peut provoquer un choc lectrique ou un incendie. Ne pliez pas, ne tordez pas et n'endommagez pas le cordon d'alimentation. Le cordon d'alimentation doit tre conforme aux rglementations locales de scurit. Veillez ne pas endommager ni modifier les broches ou le contact de terre sur la fiche du cordon d'alimentation. Ne placez pas l'cran LCD sur une surface qui nest pas de niveau ou sur un vhicule instable. Lcran LCD pourrait tomber et causer des dgts importants. Ne couvrez pas les orifices de ventilation et / ou le dissipateur de chaleur. N'installez pas l'cran LCD ct de radiateurs ou d'autres sources de chaleur. Le site d'installation doit disposer d'une ventilation suffisante pour que la chaleur gnre par l'cran LCD puisse tre dissipe. N'utilisez pas l'affichage signaltique dans un environnement chaud, humide, poussireux ou enfum. Manipulez lcran LCD avec soin. Conservez les matriaux d'emballage pour tout transport ultrieur. Nettoyez larrire de lcran LCD au moins une fois par mois afin dliminer la poussire et autres particules. Dbranchez immdiatement l'cran LCD et contactez un rparateur professionnel certifi DynaScan ds que possible lorsque l'une des situations suivantes se produit :

Cordon d'alimentation ou fiche d'alimentation endommag. Si du liquide ou un corps tranger est entr dans l'cran LCD. Si lcran LCD a t expos la pluie ou l'eau. Si lcran LCD est tomb ou si le botier a t endommag. Si vous constatez des dommages structurels comme des fissures ou des vibrations non naturelles. Si lcran LCD ne peut pas tre utilis en suivant les tapes dcrites dans le prsent manuel. Si l'cran LCD met de la fume ou d'autres odeurs, ou gnre des bruits tranges. Suggestions dutilisation Nettoyage du panneau vitez d'afficher une image immobile pendant une priode prolonge afin d'viter que la rmanence dimage. Utilisez un chiffon doux non pelucheux pour essuyer dlicatement la poussire du panneau de l'cran. N'utilisez aucun matriau dur pour essuyer le panneau. Afin dviter tout dommage, nappuyez pas sur le panneau avec votre main ou un objet pointu

(comme un stylo ou un ongle) et n'exercez pas de pression excessive sur le panneau. N'utilisez aucune solution de nettoyage sur le panneau car cela pourrait provoquer une dcoloration. Danger de stabilit ou libell quivalent;

Le moniteur peut tomber, entranant des blessures graves ou mortelles ou texte quivalent;

Le texte suivant ou quivalent:

Pour viter les blessures, ce moniteur doit tre solidement fix au sol / mur conformment aux instructions d'installation. DS752LT5 User Manual 7 Plug Shape IEC Display Plug IEC Plug TYPE Getting Started Contents Confirm that the accessories below are shipped along with the display. If any item is missing, please contact your dealer. The color and shape of the accessories may vary with the products. DS752LT5 Professional LCD. Remote Control x 1 pc. Batteries (1.5V / AAA) x2 pcs. Power cable x1 pc. Quick Start Guide x1 pc. ESK302 x1 pc. Attention: Please use the following table to check whether the included power cord is suitable for your region. If the power cord does not match your region, please contact your local supplier. Please use matching AC socket in order to meet your local safety regulations. Plug Type North America Japan Taiwan European Continental Region U.S.A. / Canada Voltage NEMA TYPE 120V NEMA 5-15 EU

(Except U.K.) 230V CEE 7/7 Japan 100V Taiwan 110V NEMA 1-15 NEMA 5-15 IEC320 C13 Insert 2 new AAA batteries. Installing and Replacing Remote Control Batteries 1. Open the battery compartment cover. 2. 3. Close the battery compartment cover. Warning:

Incorrect usage of batteries may cause leakage or explosion. Pay attention to the polarity when installing the batteries. Do not mix different types of batteries or new and used batteries. Doing so may shorten the battery life or cause leakage. Remove or replace the batteries when they are empty in order to prevent acid leaking in the battery compartment. Do not touch the leaked substance from the batteries in case of a battery leakage. Doing so may hurt human skin. Note: If the remote control is not going to be used for a long time, we recommend removing the batteries from the remote control. DS752LT5 User Manual 8 Bien dbuter Contenu Vrifiez que les accessoires ci-dessous sont fournis avec lcran. Si l'un d'eux est manquant, veuillez contacter immdiatement votre revendeur. La couleur et la forme des accessoires peuvent varier selon les produits. cran LCD DS752LT5 Professional. Tlcommande x 1 Piles (1,5V / AAA) x 2 Cble d'alimentation x 1 Guide de dmarrage rapide x 1 ESK302 x 1 Attention : Veuillez utiliser le tableau suivant afin de vrifier que le cordon dalimentation fourni est adapt votre rgion. Si le cordon d'alimentation ne correspond pas votre rgion, veuillez contacter votre fournisseur local. Veuillez utiliser la prise secteur correspondante afin de respecter les rglementations locales de scurit. Type de fiche Amrique du Nord Europe continentale Japon Tawan Forme de la fiche Rgion Tension TYPE NEMA Fiche daffichage TYPE fiche CEI CEI tats-Unis /

Canada 120V NEMA 5-15 UE

(Hors R.-U.) 230V CEE 7/7 Japon 100V Tawan 110V NEMA 1-15 NEMA 5-15 IEC320 C13 Insrez 2 nouvelles piles AAA. Mise en place et remplacement des piles de la tlcommande 1. Ouvrez le couvercle du logement piles. 2. 3. Fermez le couvercle du logement piles. Avertissement :

Une mauvaise utilisation des piles peut provoquer des fuites ou une explosion. Faites attention la polarit lors de l'installation des piles. Ne mlangez pas diffrents types de piles ou des piles neuves et usages. Cela pourrait raccourcir la dure de vie des piles ou causer des fuites. Retirez ou remplacez les piles lorsqu'elles sont vides afin d'viter toute fuite d'acide dans le logement piles. Ne touchez pas la substance qui scoule des piles en cas de fuite. Cela pourrait blesser la peau. DS752LT5 User Manual 9 Remarque : Si la tlcommande ne doit pas tre utilise pendant une priode prolonge, nous vous recommandons den retirer les piles. DS752LT5 User Manual 10 Installation The LCD must be properly installed using a wall mount. Incorrect installation may cause injury or damage the equipment. Product warranty does not cover the damage caused by improper installation and DynaScan shall not be held responsible in such incident. Refer to the mount manufacturers instructions for proper installation. Mounting We recommend for at least four people to handle and mount the display. Mounting the Professional LCD on the wall is the responsibility of the user. Not all walls provide enough strength to support the LCD. The LCD may drop and cause serious injury if it is mounted on a slanted wall. Product warranty does not cover improper installation, modification, or damage caused by natural disasters. DynaScan recommends having certified professionals to evaluate the installation site and perform the mounting operation. Do not to cover the vent and/or the heat sink in order to ensure proper heat dissipation. Refer to the installation guide provided by the manufacturer for proper mounting. When mounting on a wall A wall mount is not included in the accessory. Please purchase a VESA Standard wall mount to secure the LCD. DynaScan is not responsible for the damage caused by using non-standard wall mounts. Verify that the mounting location can support the weight of the LCD before installation. The installation angle must be within 15 degrees of the vertical axis. Do not install the wall mount while the power is turned on as it may cause serious injury due to electrical shock. Model Number VESA (mm) Screw Length Number Screw Specification DS752LT5

(A * B) 400 * 800 M6 4 Greater than 10mm Smaller than 12mm

(not including wall mount thickness) DS752LT5 User Manual 11 A Unit: mm B Orientation When used in the portrait orientation, the LCD should be rotated clockwise when looking at the front of the display such that the left edge becomes the top edge. Portrait mode: Rotate the set clockwise 90 (mandatory)

<Front>

The orientation sticker can be found on the rear of display, which is for distinguishing the direction of installation. DS752LT5 User Manual 12 Installation Location The wall and mount must have enough strength to support the LCD and its accessories. Do not install in a location with strong vibrations or dusty. Do not install near the buildings main electric panel. Ensure the LCD is secured in such a manner that it cannot be easily removed by the general public. Leave clearance around the outer edge of the LCD (or video wall matrix) from other objects to ensure proper ventilation. For installations with screens inset into the wall, refer to section: Enclosures for cooling and ventilation considerations. Single display Maintenance Inspect the fasteners regularly for signs of loosening or deformation. Please perform appropriate corrective measures when a problem is identified. Neglecting the problem may worsen the situation. Increase the inspection frequency on areas where previous maintenance had occurred to ensure the problems do not occur again. DS752LT5 User Manual 13 Wall Mounting A wall mount is not included. Please purchase a VESA Standard wall mount to secure the LCD. DynaScan is not responsible for damages caused by using non-standard wall mounts. Verify that the mounting location can support the weight of the LCD before installation. The installation angle must be within 15 degrees of the vertical axis. Do not install the wall mount while the power is turned on as it may cause serious injury from electrical shock. 15 Connecting to a Power Source Using the power cable provided, plug it in the power inlet on the back of the display shown in the diagram below. Connect the power cable to a 100-240 volt, 50 / 60Hz AC power outlet. Insert the plug completely into the socket. A loose power connection may cause damage to the display and/or lead to a fire hazard. DS752LT5 User Manual 14 Connecting an External Video Source Turn OFF the power of both LCD and external video device. Using the DP cable (or HDMI cable) provided, insert one end into the DP-IN (or HDMI 1-IN, HDMI 2-IN) on the back of the display shown the in the diagram below. Connect the other end of the DP cable (HDMI cable) to the DP output (or HDMI output) of the video source. Refer to your video devices manual for additional information. DS752LT5 User Manual 15 Input / Output Terminals A. AC (OUT): AC outlet 100 - 240V up to 100 Watt. B. AC (IN): Connect the supplied power cord to the wall outlet. C. Power Switch: Press to switch the main power on/off. D. RJ-45 1 (IN): RJ45 network input connection. E. RJ-45 2 (IN): RJ45 network input connection. F. RS-232 (IN): RS232C network input connection for remote control from PC. G. HDMI 1 (IN): Connect the HDMI output of a PC or an AV device via a HDMI cable. H. HDMI 2 (IN): Connect the HDMI output of a PC or an AV device via a HDMI cable. DP (IN): Connect the DP output of a PC or an AV device via a DP cable. I. J. USB 3.0 port: Support for USB flash drive storage, mouse and keyboard. K. Extension Connector: Extension Connector for optional IR Extension sensor kit (ESK302). L. Micro SD card: Support for up to 128GB, FAT32 format is supported. M. Thermal: Extension Connector for optional Extension thermal kit (ETK203). N. Audio (OUT): Connect the audio signal output from Audio IN jack to an external AV device. A C E G I M K B D F H L J N DS752LT5 User Manual 16 Operating Instructions Powering On/Off the Display To turn on/off the display, press the power switch on the back of the display as shown in the diagram below. ON OFF NOTE: The remote control only works when the power switch is ON. DS752LT5 User Manual 17 Using the Remote Control Connection using an External Sensor Kit (ESK302) Connect the ESK302 cable to the mini USB port on the side of the display, and aim the remote at the IR receiver as shown below. Meanwhile, the IR receiver on the display will be disabled. The operating range of the remote control is 2.5 meters (8 feet). NOTE: Ambient light may affect the performance of the remote control. Avoid fluorescent or neon lights in the vicinity. DS752LT5 User Manual 18

*Color and shape may vary by model. ITEM DESCRIPTION

POWER

MENU

UP

LEFT RIGHT DOWN OK BACK Power On / Off OSD On / Off Move the cursor up or change the setting of selected item. Exit the current selection. Select the highlighted item. Move the cursor down or change the setting of selected item. Enter (for DSM365 only) Return to the last page. (for DSM365 only) DS752LT5 User Manual 19 Using the built-in keypad ITEM MENU UP DOWN LEFT RIGHT DESCRIPTION OSD On / Off, Power On / Off. Move the cursor up or change the setting of selected item. Move the cursor down or change the setting of selected item. Exit the current selection. Select the highlighted item. DS752LT5 User Manual 20 Navigating the On Screen Display (OSD) Menu Press the MENU button on the built-in keypad or remote control to show the OSD. Use the navigation arrows to select and adjust the menu items.

*The change of each setting can only enable when you press LEFT (refer to p.19) to back to the last menu layer. 1. Input Source ITEM 1 ITEM 2 DEFAULT DESCRIPTION Main Failover 1 Failover 2 Failover 3 Failover 4 HDMI 1 HDMI 2 DP DSM365 SDM Set the Main input to display. Set the Failover 1 input to display. Set the Failover 2 input to display. Set the Failover 3 input to display. Set the Failover 4 input to display. Input Source 2. Picture ITEM 1 Picture ITEM 2 DEFAULT DESCRIPTION Color Temperature USER 2 Red Green Select the color temperature. (User2, User1, D93, D65 and D55). Adjust the red light level. Range 0 100. Note: The feature is only supported on User2 mode. Adjust the green light level. Range 0 100. DS752LT5 User Manual 21 3. Time Blue Contrast Gamma 60 2.4 Black Level Auto Note: The feature is only supported on User2 mode. Adjust the blue light level. Range 0 100. Note: The feature is only supported on User2 mode. Adjust the contrast level. Range 0 100. Adjusts the Gamma value. (Native, 2.2, 2.4 and sGamma) Selects the black level to adjust the screen gray scale. "Limited" for video source uses 16 to 235 levels for R/G/B, such as HDMI.

"RGB Full" for video source uses all levels from 0 to 255 levels.

"Auto" is for detecting the video source to determine its value is applicable for

"Limited" or "RGB Full". ITEM 1 ITEM 2 DEFAULT DESCRIPTION Current Date YYYY:MM:DD Current Time HH:MM:SS Set the date. Set the clock. Note: The internal clock will continue to function when the power is turned off. GMT+00:00 Set the day of week. (Monday to Sunday) Set the Time Zone. Time Day of Week Time Zone Power Control Timer Power On Time Power Off Time Off 00:00 00:00 Automatic power on / off schedule function. Set turn-on time. Set turn-off time. DS752LT5 User Manual 22 ITEM 1 ITEM 2 DEFAULT DESCRIPTION 4. Backlight Auto Brightness Off Backlight High Level Low Level 100 20 High Level Time Low Level Time 00:00 00:00 Local Dimming Local Dimming 2 A. If the AUTO BRIGHTNESS is Off, the screen brightness will remain at HIGH LEVEL brightness value. B. If the AUTO BRIGHTNESS is Auto, the brightness of display will be adjusted according to the ambient light. When ambient light is bright, the screen will adjust to the High Level brightness value set; when ambient light is dark, the screen will adjust to the Low Level brightness value set. C. When the Timer (High Level Time &

Low Level Time) mode is set, the display will automatically switch the brightness according to the time set. D. When setting Mix mode, Timer and Light sensor will work at this mode. For example, setting "High Level Time

= 8:00am" and "Low Level Time =

6:00pm", the light sensor will detect environment brightness and then display will adjust the value of High Level during 8:00am and 6:00pm. Adjusts the highest brightness level. Range 0 100. Adjusts the lowest brightness level. Range 0 100. Set high level time. Set low level time. Adjusts the contrast. UDR1~3 is the highest contrast. Local Dimming 1 is the lowest contrast.

(Local Dimming 1, Local Dimming 2, UDR1, UDR2 and UDR3) DS752LT5 User Manual 23 5. Advance ITEM 1 ITEM 2 DEFAULT DESCRIPTION Power Off Mode Standby Advance Display Mode Portrait Screen Protection Off IR Control On AC Back Status Power On Volume 50 Reset Default Setting Off Change the Menu orientation. The Menu can be displayed in either LANDSCAPE, or PORTRAIT mode. Turn on / off image burn-in protection. Set image burn-in protection interval. Range 0 100 minutes. Enable/disable the remote control for Menu. Note: When disabled, the remote control function can be enabled again from the control panel on the display or through the DynaScan Display Manager application. When in Power Off Mode, RS-232 controls do not function. Only [Main Power Switch]

on the display or [Power Button] on the remote control can wake up the display. Choose to use the AC back status function. Power On: Display booting up when the power back after an outage. Standby: Display keeps soft-off status when the power back after an outage. Memory: Display will back to the last state when the power back after an outage. Set volume. Range 100 0. Restore all settings to default. Note: It does not modify CURRENT DATE, CURRENT TIME, DATE OF WEEK, TIME ZONE, POWER ON TIME and POWER OFF TIME. DS752LT5 User Manual 24 6. Information ITEM 1 ITEM 2 DEFAULT DESCRIPTION Resolution Input resolution. Model DS752LT5 The displays model. Serial Number The displays serial number. Information Hardware Firmware Cabinet Temp. ETK Temp. Humidity ALS Level The H/W version. The F/W version. LCD inner (backlight unit) temperature monitoring. The Extension Thermal Kit (ETK203) is for ambient temperature monitoring. LCD inner (backlight unit) humidity monitoring. The brightness of ambience monitoring.

(Ambience Light Sensor) Some functions may not be available for all models.

*Adjusted value: Each R/G/B value for this product has been individually adjusted during production to a preset color temperature of 6500K. DS752LT5 User Manual 25 Specifications MODEL PANEL POWER MECHANICAL SPECS I/O Ports Fuse USER INTERFACE OSD Language ENVIRONMENT LCD Panel Size Native Resolution Brightness Contrast Ratio Response Time Viewing Angle Life Time Panel Surface Power Supply Rated Voltage Power On Mode Standby Mode AC Out Bezel Width (T/B/L/R) Cabinet Color Monitor Dimension (LxHxD) Monitor Weight (set / package) VESA Mounting (Dimension) DS752LT5 74.52 inches 3840 x 2160 4,000 cd/m (Typ.) 3,000:1 8 ms (Typ.) 178/ 178 100,000 hrs (Typ.) AG Haze 3%, 2H Internal 100 - 240V, 50 / 60Hz 420W (Typ.) / 800W (Max.)

< 1W

< 100W 17.0/17.0/16.5/16.5 mm Black 1688 x 967.5 x 93.6 mm 60 kg / 68 kg 4 Holes (400x800 mm) English Operation Temperature Storage Temperature Humidity HDMI DP RS-232 Audio USB port RJ-45 Micro SD Slot Extension Connector (Mini USB) 0C ~ 45C

-20C ~ 60C 10%~80% RH Non-Condensing IN *2 IN *1 IN *1 OUT *1 IN *1 IN *2 IN *1 IN *1 (ESK only) 12.5A Design and specifications are subject to change without notice. DS752LT5 User Manual 26 640 720 800 960 1024 1280 1280 1280 1280 1366 1400 1440 1600 1680 1920 1920 1920 1920 2560 3840 Input Mode Active Resolution H Pixels V Lines Refresh Rate 480 480 600 600 768 720 768 960 1024 768 1050 900 1200 1050 720 1080 1200 1440 1440 2160 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz DS752LT5 User Manual 27 Pin Assignments RS-232 Input PIN No. NAME 01 02 03 04 05 06 07 08 09 Connected to 7&8 TXD RXD Connected to 6 GND Connected to 4 Connected to 1&8 Connected to 1&7 NC DS752LT5 User Manual 28 Troubleshooting ISSUE RECOMMENDED SOLUTION

Check whether the cable is completely plugged in.

Check whether the main switch is in the ON position, and the power cord is completely plugged in.

Check whether the image sources resolution is set as the supported format (refer to section Input Mode, p.27).

Check whether the cable is damaged or bent excessively.

Unplug the power cord from the socket and plug it in again after a few seconds to reset the Signage. Note: Unplugging the power cord will not change the settings.

Check whether the cable is completely plugged in.

Check whether there are batteries in the remote control.

Check the batteries for freshness, polarity, etc.

Check whether the remote is in the operation range.

Bright light may interfere with the remote control. Please avoid using the remote control near special fluorescent lights or neon lights.

Check whether the TIMER setting in the menu is set to OFF.

Check whether the Power On Time and Power Off Time settings are set correctly.

Check whether the RS-232 cable is connected properly. No image is displayed. Nothing happens when switching the main switch on. Image is unstable. The remote control does not work. Auto on/off does not work or does not function properly. Cannot control the display remotely via RS-232. If you are still having trouble with your DynaScan DS Professional LCD, contact your dealer or DynaScan directly for more assistance. DS752LT5 User Manual 29 About DSM365 DSM365 is an internal operating system as Android, which can install the applications via USB flash drive storage, SD card or Internet. How to Switch to DSM365 Press the MENU button on either the rear panel control or remote control to show the OSD. Use the navigation arrows to select and adjust the Input Source.

[Input Source Main DSM365]

ITEM

APPS DESCRIPTION Show the Installed APPS. DS752LT5 User Manual 30 www.dynascandisplay.com Copyright DynaScan Technology, Inc. All Rights Reserved. DS752LT5 User Manual 31

49 Clean Back Digital Signage 64907 | V2.00 Contents Material Contents Declaration ................................................................................................................ 1 Recycling and Energy Information ......................................................................................................... 1 Declaration of Conformity ....................................................................................................................... 2 Dclaration de conformit....................................................................................................................... 3 Safety Precautions ................................................................................................................................. 4 Prcautions relatives la scurit .......................................................................................................... 5 Important Safety Information .................................................................................................................. 6 Informations importantes relatives la scurit ..................................................................................... 7 Getting Started ....................................................................................................................................... 8 Contents ............................................................................................................................................. 8 Installing and Replacing Remote Control Batteries ............................................................................ 8 Bien dbuter ........................................................................................................................................... 9 Contenu .............................................................................................................................................. 9 Mise en place et remplacement des piles de la tlcommande......................................................... 9 Installation............................................................................................................................................. 10 Mounting ........................................................................................................................................... 10 Wall Mounting ................................................................................................................................... 13 Connecting to a Power Source ......................................................................................................... 13 Connecting an External Video Source ............................................................................................. 14 Input / Output Terminals ................................................................................................................... 15 Operating Instructions .......................................................................................................................... 16 Powering On/Off the Display ............................................................................................................ 16 Using the Remote Control ................................................................................................................ 17 Using the built-in keypad .................................................................................................................. 19 Navigating the On Screen Display (OSD) Menu .................................................................................. 20 Specifications ....................................................................................................................................... 25 Input Mode ............................................................................................................................................ 26 Pin Assignments ................................................................................................................................... 27 RS-232 Input .................................................................................................................................... 27 Troubleshooting .................................................................................................................................... 28 About DSM365 ..................................................................................................................................... 29 0 Material Contents Declaration Part Name Lead Mercury Cadmium Hazardous Substances Hexavalent Chromium Cr6+

O O O O Polybrominated Biphenyls PBB O O O O Polybromodiphenyl Ethers PBDE O O O O PCBA CHASSIS ACCESSORY PACKAGE O indicates that the level of the specified chemical substance is less than the threshold level specified in the standards of SJ/T-11363-2006 and EU 2005/618/EC. indicates that the level of the specified chemical substance exceeds the threshold level specified in the standards of SJ/T-11363-2006 and EU 2005/618/EC. Pb O O O O Hg O O O O Cd O O O O Recycling and Energy Information DynaScan is firmly committed to its environmental protection efforts and we believe that reducing our products impact on the environment is of the utmost importance. We are dedicated to meet the latest environmental protection regulations. Energy usage Mode Normal Standby Energy Consumption Max. 250 W

< 1 W Disposal Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being. When replacing old appliances with new one, the retailer is legally obligated to take back your old appliances for disposal at least for free of charge. DS491LT5 User Manual 1 Declaration of Conformity FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. CAUTION:

Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Manufacturer Name DynaScan Technology Corp. Manufacturer Address 6F, No. 88 Wenmao Rd., Guishan Dist, Taoyuan City 333001,Taiwan This device complies with Directive 2014/53/EU issued by the Commission of the European Community. Article (a) EN 62368-1 Article (b) EN 55032 Class A EN 61000-3-2:2014 EN 61000-3-3:2013 EN 55035:2017 EN 301 489-1 Class A EN 301 489-17

- Frequency bands and Powers a. WIFI 2.4G-2412~2462MHz. b. Maximum radio-frequency power transmitted in the 2.4GHz is 50mW. DS491LT5 User Manual 2 Dclaration de conformit FCC Cet appareil est conforme la section 15 de la rglementation FCC. Son utilisation est sujette aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interfrence nuisible, et (2) cet appareil doit accepter toute interfrence reue, y compris celles qui peuvent causer un fonctionnement non souhait. D CLARATION DE LA COMMISSION F D RALE DES COMMUNICATIONS Cet quipement a t test et dclar conforme aux limites d'un appareil numrique de classe A, conformment la partie 15 des rgles FCC. Ces limites sont conues pour fournir une protection raisonnable contre les interfrences nuisibles lorsque l'quipement est utilis dans un environnement commercial. Ce l'quipement gnre, utilise et peut mettre de l'nergie radiofrquence et, s'il n'est pas install et utilis conformment au manuel d'instructions, peut provoquer des interfrences nuisibles aux communications radio. Le fonctionnement de cet quipement dans une zone rsidentielle est susceptible de provoquer des interfrences nuisibles, auquel cas l'utilisateur devra corriger les interfrences ses propres frais. ATTENTION :

Tout changement ou modification, non expressment approuv par le responsable de la conformit, peut rvoquer lautorit de l'utilisateur employer l'appareil en question. Avertissement relatif aux expositions RF Cet appareil doit tre install et utilis en accord avec les instructions fournies et les antennes utilises pour cet metteur doivent tre installes de faon fournir une distance de sparation d'au moins 20 cm par rapport toute personne, et elles ne doivent pas tre co-localises ni opres en conjonction avec d'autres antennes ou metteurs. Les utilisateurs finaux et les installateurs doivent recevoir les instructions d'installation des antennes et les conditions d'utilisation de l'metteur pour satisfaire la conformit aux expositions RF. Nom du fabricant DynaScan Technology Corp. Adresse du fabricant 6F, No. 88 Wenmao Rd., Guishan Dist, Taoyuan City 333001,Taiwan Cet appareil est conforme la directive 2014/53/UE mise par la Commission de la Communaut europenne. L'article (a) EN 62368-1 L'article (b) EN 55032 Class A EN 61000-3-2:2014 EN 61000-3-3:2013 EN 55035:2017 EN 301 489-1 Class A EN 301 489-17

- Bandes de frquences et puissances a. WIFI 2,4G-2412~2462MHz. b. La puissance radiofrquence maximale transmise dans la bande 2,4 GHz est de 50 mW DS491LT5 User Manual 3 Safety Precautions CAUTION Do not install near flammable material or any heat sources. Do not defeat the safety purpose of the grounding-type plug. Do not disassemble the display to avoid electrical shock or burn. Normal operating condition considers installation at an altitude below 2000m;

some abnormalities may be experienced when installed at an altitude above 2000m. WARNING Please power off the LCD and the video source before plugging in the DP or HDMI cable. Please installed the display in well-ventilated place, do not install in a confined space. Suitable for mounting on concrete or other non-combustible surface only. If it gives off smoke, strange smell, or unusual noise, or when it gets too hot to touch, immediately unplug the display and contact the dealer. Clean only with soft, dry cloth but not use chemical liquids, and unplug while cleaning. Do not use extreme force or any sharp or pointed objects to touch the display. Do not drop or allow any object to fall to the display. Do not operate the display with wet hands to avoid electric shock. Do not discard this product with general household waste. Please be sure to comply with the local waste regulations. This device uses, generates and radiated radio frequency energy. The radio frequency energy produced by this device is well below the maximum exposure allows by Federal Communications Commission (FCC). When a stationary or fixed image is displayed on the screen for a long time, the image may be permanently imprinted on the screen. This phenomenon is known as image burn-in and is not covered by the manufacturer's warranty. In order to avoid burn-in, avoid prolonged display of static or fixed images on the screen. Power supply cord must not be attached to the building surface, nor run through walls, ceilings, floors and similar openings in the building structure. Power cord shall be connected to a socket-outlet with earthing connection. DS491LT5 User Manual 4 Prcautions relatives la scurit PR CAUTIONS N'installez pas installer proximit de matriaux inflammables ou de sources de chaleur. Ne pas compromettre la scurit de la fiche de mise la terre. Pour viter tout choc lectrique ou la brlure, ne dmontez pas l'cran. Le produit peut normalement tre utilis une altitude infrieure 2000 m. Des anomalies peuvent survenir lors de linstallation de lappareil une altitude suprieure 2000 m. AVERTISSEMENT Veuillez teindre l'cran LCD et la source vido avant de brancher le cble DP ou HDMI. Veuillez installer l'cran dans un endroit bien ventil, pas dans un espace confin. Convient pour le montage sur du bton ou autre surface non combustible uniquement. S'il dgage de la fume, une odeur trange ou un bruit inhabituel, ou s'il est trop chaud au toucher, dbranchez immdiatement l'cran et contactez le revendeur. Nettoyez uniquement avec un chiffon doux et sec, sans utiliser de produits chimiques, et dbranchez-le pendant le nettoyage. N'exercez pas une force excessive et nutilisez pas d'objets tranchants ou pointus pour toucher l'cran. Ne laissez pas tomber lcran et ne laissez aucun objet tomber dessus. Afin dviter tout choc lectrique, n'utilisez pas l'cran avec les mains mouilles. Ne jetez pas ce produit avec les dchets mnagers. Assurez-vous de respecter les rglementations locales en matire de dchets. Cet appareil utilise, gnre et rayonne de lnergie radiofrquence. L'nergie de radiofrquence produite par cet appareil est bien infrieure l'exposition maximale autorise par la FCC (Federal Communications Commission). Lorsqu'une image immobile ou fixe est affiche sur l'cran pendant une longue priode, l'image peut tre imprime de manire permanente sur l'cran. Ce phnomne est connu sous le nom d'image rmanente et n'est pas couvert par la garantie du fabricant. Afin d'viter toute dtrioration, vitez l'affichage prolong d'images statiques ou fixes sur l'cran. Le cordon d'alimentation ne doit pas tre connect la surface du btiment, ni traverser les murs, les plafonds, les planchers et les ouvertures similaires du btiment. Le cordon d'alimentation doit tre connect une prise lectrique mise la terre DS491LT5 User Manual 5 Important Safety Information Disassembling the LCD is strictly prohibited. Opening the cover may expose the user to electric shock or other hazards. Please contact DynaScan certified service professionals for all maintenance requirements. Do not allow any liquid to enter the LCD. Also avoid placing the LCD close to water sources. Do not place heavy objects on the power cord. A damaged power cord might cause electric shock or fire. Do not bend, twist, or damage the power cord. The power cord must comply with the local safety regulations. Do not damage or modify the prongs/pins and the ground contact on the power cord plug. Do not place the LCD on an unleveled surface or an unstable vehicle. The LCD could fall over and cause substantial damage. Do not cover the vents and/or the heat sink. Do not install the LCD beside radiators or other heat sources. The installation site should have sufficient ventilation so the heat generated by the LCD can be dissipated. Do not use the Signage in a hot, humid, dusty, or fumy environment. Handle the LCD with care. Save the packaging materials for transport later. Clean the LCD backside at least once a month for dust and other particles. Damaged power cord or power plug. If liquid or foreign object has entered the LCD. If the LCD has been exposed to rain or water. If the LCD has been dropped or the casing has become damaged. If any structural damage such as cracks or unnatural vibration is found. If the LCD cannot be operated following the steps outlined in this manual. If the LCD emits smoke or other odors, or generates strange noises. Unplug the LCD immediately and contact a DynaScan certified service professional as soon as possible when any of the following situations occurs:

Operating Suggestions Cleaning the Panel Use a soft, lint-free cloth to gently wipe the dust off from the screen panel. Do not use any hard material to wipe the panel. Do not poke the panel with your hand or any sharp object (such as a pen or a nail) or exert excessive pressure on the panel to prevent any damage. Do not use any cleaning solutions on the panel as it might cause discoloration. Avoid displaying a stationary image for a long period of time in order to prevent image sticking. Unplug the power cord. Cleaning the Casing Gently wipe the casing with a soft cloth. Attention Do not use any of the following solutions to clean the casing as they may damage the paint and cause it to crack or peel: benzene solution, alkaline solution, alcohol-based cleaning solution, glass cleaner, wax, polisher, or detergent. DS491LT5 User Manual 6 Informations importantes relatives la scurit Le dmontage de l'cran LCD est strictement interdit. L'ouverture du capot peut exposer l'utilisateur un choc lectrique ou d'autres dangers. Veuillez contacter des professionnels de service certifis DynaScan pour tous les besoins de maintenance. Ne laissez aucun liquide pntrer dans l'cran LCD. vitez galement de placer lcran LCD proximit de sources deau. Ne placez aucun objet lourd sur le cordon d'alimentation. Un cordon d'alimentation endommag peut provoquer un choc lectrique ou un incendie. Ne pliez pas, ne tordez pas et n'endommagez pas le cordon d'alimentation. Le cordon d'alimentation doit tre conforme aux rglementations locales de scurit. Veillez ne pas endommager ni modifier les broches ou le contact de terre sur la fiche du cordon d'alimentation. Ne placez pas l'cran LCD sur une surface qui nest pas de niveau ou sur un vhicule instable. Lcran LCD pourrait tomber et causer des dgts importants. Ne couvrez pas les orifices de ventilation et / ou le dissipateur de chaleur. N'installez pas l'cran LCD ct de radiateurs ou d'autres sources de chaleur. Le site d'installation doit disposer d'une ventilation suffisante pour que la chaleur gnre par l'cran LCD puisse tre dissipe. N'utilisez pas l'affichage signaltique dans un environnement chaud, humide, poussireux ou enfum. Manipulez lcran LCD avec soin. Conservez les matriaux d'emballage pour tout transport ultrieur. Nettoyez larrire de lcran LCD au moins une fois par mois afin dliminer la poussire et autres particules. Dbranchez immdiatement l'cran LCD et contactez un rparateur professionnel certifi DynaScan ds que possible lorsque l'une des situations suivantes se produit :

Cordon d'alimentation ou fiche d'alimentation endommag. Si du liquide ou un corps tranger est entr dans l'cran LCD. Si lcran LCD a t expos la pluie ou l'eau. Si lcran LCD est tomb ou si le botier a t endommag. Si vous constatez des dommages structurels comme des fissures ou des vibrations non naturelles. Si lcran LCD ne peut pas tre utilis en suivant les tapes dcrites dans le prsent manuel. Si l'cran LCD met de la fume ou d'autres odeurs, ou gnre des bruits tranges. Suggestions dutilisation Nettoyage du panneau vitez d'afficher une image immobile pendant une priode prolonge afin d'viter que la rmanence dimage. Utilisez un chiffon doux non pelucheux pour essuyer dlicatement la poussire du panneau de l'cran. N'utilisez aucun matriau dur pour essuyer le panneau. Afin dviter tout dommage, nappuyez pas sur le panneau avec votre main ou un objet pointu

(comme un stylo ou un ongle) et n'exercez pas de pression excessive sur le panneau. N'utilisez aucune solution de nettoyage sur le panneau car cela pourrait provoquer une dcoloration. Danger de stabilit ou libell quivalent;

Le moniteur peut tomber, entranant des blessures graves ou mortelles ou texte quivalent;

Le texte suivant ou quivalent:

Pour viter les blessures, ce moniteur doit tre solidement fix au sol / mur conformment aux instructions d'installation. DS491LT5 User Manual 7 Getting Started Contents Confirm that the accessories below are shipped along with the display. If any item is missing, please contact your dealer. The color and shape of the accessories may vary with the products. DS491LT5 Professional LCD. Remote Control x 1 pc. Batteries (1.5V / AAA) x2 pcs. Power cable x1 pc. Quick Start Guide x1 pc. ESK302 x1 pc. Attention: Please use the following table to check whether the included power cord is suitable for your region. If the power cord does not match your region, please contact your local supplier. Please use matching AC socket in order to meet your local safety regulations. Plug Type North America Japan Taiwan European Continental Plug Shape Voltage NEMA TYPE IEC Display Plug IEC Plug TYPE Region U.S.A. / Canada 120V EU

(Except U.K.) 230V Japan 100V Taiwan 110V NEMA 5-15 CEE 7/7 NEMA 1-15 NEMA 5-15 IEC320 C13 Insert 2 new AAA batteries. Installing and Replacing Remote Control Batteries 1. Open the battery compartment cover. 2. 3. Close the battery compartment cover. Warning:

Incorrect usage of batteries may cause leakage or explosion. Pay attention to the polarity when installing the batteries. Do not mix different types of batteries or new and used batteries. Doing so may shorten the battery life or cause leakage. Remove or replace the batteries when they are empty in order to prevent acid leaking in the battery compartment. Do not touch the leaked substance from the batteries in case of a battery leakage. Doing so may hurt human skin. Note: If the remote control is not going to be used for a long time, we recommend removing the batteries from the remote control. DS491LT5 User Manual 8 Bien dbuter Contenu Vrifiez que les accessoires ci-dessous sont fournis avec lcran. Si l'un d'eux est manquant, veuillez contacter immdiatement votre revendeur. La couleur et la forme des accessoires peuvent varier selon les produits. cran LCD DS491LT5 Professional. Tlcommande x 1 Piles (1,5V / AAA) x 2 Cble d'alimentation x 1 Guide de dmarrage rapide x 1 ESK302 x 1 Attention : Veuillez utiliser le tableau suivant afin de vrifier que le cordon dalimentation fourni est adapt votre rgion. Si le cordon d'alimentation ne correspond pas votre rgion, veuillez contacter votre fournisseur local. Veuillez utiliser la prise secteur correspondante afin de respecter les rglementations locales de scurit. Type de fiche Amrique du Nord Europe continentale Japon Tawan Forme de la fiche Rgion Tension TYPE NEMA Fiche daffichage CEI TYPE fiche CEI tats-Unis /

Canada 120V NEMA 5-15 UE

(Hors R.-U.) 230V CEE 7/7 Japon 100V Tawan 110V NEMA 1-15 NEMA 5-15 IEC320 C13 Insrez 2 nouvelles piles AAA. Mise en place et remplacement des piles de la tlcommande 1. Ouvrez le couvercle du logement piles. 2. 3. Fermez le couvercle du logement piles. Avertissement :

Une mauvaise utilisation des piles peut provoquer des fuites ou une explosion. Faites attention la polarit lors de l'installation des piles. Ne mlangez pas diffrents types de piles ou des piles neuves et usages. Cela pourrait raccourcir la dure de vie des piles ou causer des fuites. Retirez ou remplacez les piles lorsqu'elles sont vides afin d'viter toute fuite d'acide dans le logement piles. Ne touchez pas la substance qui scoule des piles en cas de fuite. Cela pourrait blesser la peau. Remarque : Si la tlcommande ne doit pas tre utilise pendant une priode prolonge, nous vous recommandons den retirer les piles. DS491LT5 User Manual 9 Installation The LCD must be properly installed using a wall mount. Incorrect installation may cause injury or damage the equipment. Product warranty does not cover the damage caused by improper installation and DynaScan shall not be held responsible in such incident. Refer to the mount manufacturers instructions for proper installation. Mounting We recommend for at least four people to handle and mount the display. Mounting the Professional LCD on the wall is the responsibility of the user. Not all walls provide enough strength to support the LCD. The LCD may drop and cause serious injury if it is mounted on a slanted wall. Product warranty does not cover improper installation, modification, or damage caused by natural disasters. DynaScan recommends having certified professionals to evaluate the installation site and perform the mounting operation. Do not to cover the vent and/or the heat sink in order to ensure proper heat dissipation. Refer to the installation guide provided by the manufacturer for proper mounting. When mounting on a wall A wall mount is not included in the accessory. Please purchase a VESA Standard wall mount to secure the LCD. DynaScan is not responsible for the damage caused by using non-standard wall mounts. Verify that the mounting location can support the weight of the LCD before installation. The installation angle must be within 15 degrees of the vertical axis. Do not install the wall mount while the power is turned on as it may cause serious injury due to electrical shock. Model Number VESA (mm) Screw Length Number Screw Specification DS491LT5

(A * B) 400 * 400 M6 4 Greater than 10mm Smaller than 12mm

(not including wall mount thickness) DS491LT5 User Manual 10 Unit: mm B A Orientation When used in the portrait orientation, the LCD should be rotated clockwise when looking at the front of the display such that the left edge becomes the top edge. Portrait mode: Rotate the set clockwise 90 (mandatory)

<Front>

The orientation sticker can be found on the rear of display, which is for distinguishing the direction of installation. DS491LT5 User Manual 11 Installation Location The wall and mount must have enough strength to support the LCD and its accessories. Do not install in a location with strong vibrations or dusty. Do not install near the buildings main electric panel. Ensure the LCD is secured in such a manner that it cannot be easily removed by the general public. Leave clearance around the outer edge of the LCD (or video wall matrix) from other objects to ensure proper ventilation. For installations with screens inset into the wall, refer to section: Enclosures for cooling and ventilation considerations. Single display Maintenance Inspect the fasteners regularly for signs of loosening or deformation. Please perform appropriate corrective measures when a problem is identified. Neglecting the problem may worsen the situation. Increase the inspection frequency on areas where previous maintenance had occurred to ensure the problems do not occur again. DS491LT5 User Manual 12 Wall Mounting A wall mount is not included. Please purchase a VESA Standard wall mount to secure the LCD. DynaScan is not responsible for damages caused by using non-standard wall mounts. Verify that the mounting location can support the weight of the LCD before installation. The installation angle must be within 15 degrees of the vertical axis. Do not install the wall mount while the power is turned on as it may cause serious injury from electrical shock. 15 Connecting to a Power Source Using the power cable provided, plug it in the power inlet on the back of the display shown in the diagram below. Connect the power cable to a 100-240 volt, 50 / 60Hz AC power outlet. Insert the plug completely into the socket. A loose power connection may cause damage to the display and/or lead to a fire hazard. DS491LT5 User Manual 13 Connecting an External Video Source Turn OFF the power of both LCD and external video device. Using the DP cable (or HDMI cable) provided, insert one end into the DP-IN (or HDMI 1-IN, HDMI 2-IN) on the back of the display shown the in the diagram below. Connect the other end of the DP cable (HDMI cable) to the DP output (or HDMI output) of the video source. Refer to your video devices manual for additional information. DS491LT5 User Manual 14 Input / Output Terminals A. AC (IN): Connect the supplied power cord to the wall outlet. B. Power Switch: Press to switch the main power on/off. C. RJ-45 1 (IN): RJ45 network input connection. D. RJ-45 2 (IN): RJ45 network input connection. E. RS-232 (IN): RS232C network input connection for remote control from PC. F. HDMI 1 (IN): Connect the HDMI output of a PC or an AV device via a HDMI cable. G. HDMI 2 (IN): Connect the HDMI output of a PC or an AV device via a HDMI cable. H. DP (IN): Connect the DP output of a PC or an AV device via a DP cable. I. USB 3.0 port: Support for USB flash drive storage, mouse and keyboard. J. Extension Connector: Extension Connector for optional IR Extension sensor kit (ESK302). K. Micro SD card: Support for up to 128GB, FAT32 format is supported. L. Thermal: Extension Connector for optional Extension thermal kit (ETK203). M. Audio (OUT): Connect the audio signal output from Audio IN jack to an external AV device.

*USB 3.0 port: A standardized port to connect a variety of devices like mouse, keyboard, and flash drive. Support USB storage devices formatted with NTFS, FAT32 (32G) file system. A C E G I M K B D F H J L DS491LT5 User Manual 15 Operating Instructions Powering On/Off the Display To turn on/off the display, press the power switch on the back of the display as shown in the diagram below. ON OFF NOTE: The remote control only works when the power switch is ON. DS491LT5 User Manual 16 Using the Remote Control Connection using an External Sensor Kit (ESK302) Connect the ESK302 cable to the mini USB port on the side of the display, and aim the remote at the IR receiver as shown below. Meanwhile, the IR receiver on the display will be disabled. The operating range of the remote control is 2.5 meters (8 feet). NOTE: Ambient light may affect the performance of the remote control. Avoid fluorescent or neon lights in the vicinity. DS491LT5 User Manual 17

*Color and shape may vary by model. ITEM DESCRIPTION POWER MENU UP LEFT RIGHT DOWN OK BACK Power On / Off OSD On / Off Move the cursor up or change the setting of selected item. Exit the current selection. Select the highlighted item. Move the cursor down or change the setting of selected item. Enter (for DSM365 only) Return to the last page. (for DSM365 only) DS491LT5 User Manual 18 Using the built-in keypad ITEM MENU UP DOWN LEFT RIGHT DESCRIPTION OSD On / Off, Power On / Off. Move the cursor up or change the setting of selected item. Move the cursor down or change the setting of selected item. Exit the current selection. Select the highlighted item. DS491LT5 User Manual 19 Navigating the On Screen Display (OSD) Menu Press the MENU button on the built-in keypad or remote control to show the OSD. Use the navigation arrows to select and adjust the menu items.

*The change of each setting can only enable when you press LEFT (refer to p.19) to back to the last menu layer. 1. Input Source ITEM 1 ITEM 2 DEFAULT DESCRIPTION Main Failover 1 Failover 2 Failover 3 Command Detection HDMI 1 HDMI 2 DP DSM365 Off Set the Main input to display. Set the Failover 1 input to display. Set the Failover 2 input to display. Set the Failover 3 input to display. Only effective in Main input source. If the display didnt get both of commend and the input signal, it will change to Failover1 input. Input Source 2. Picture DS491LT5 User Manual 20 ITEM 1 ITEM 2 DEFAULT DESCRIPTION Color Temperature USER 2 Red Green Blue Contrast Gamma Picture 60 Native Black Level Limited Select the color temperature. (User2, User1, D93, D65 and D55). Adjust the red light level. Range 0 100. Note: The feature is only supported on User2 mode. User2 mode. User2 mode. Adjust the green light level. Range 0 100. Note: The feature is only supported on Adjust the blue light level. Range 0 100. Note: The feature is only supported on Adjust the contrast level. Range 0 100. Adjusts the Gamma value. (Native, 2.2, 2.4 and sGamma) Selects the black level to adjust the screen gray scale. "Limited" for video source uses 16 to 235 levels for R/G/B, such as HDMI.

"RGB Full" for video source uses all levels from 0 to 255 levels.

"Auto" is for detecting the video source to determine its value is applicable for

"Limited" or "RGB Full". 3. Time ITEM 1 ITEM 2 DEFAULT DESCRIPTION Time Current Date Current Time Day of Week Time Zone Power Control Timer On Time Off Time Set the date. Set the clock. Note: The internal clock will continue to function when the power is turned off. Set the day of week. (Monday to Sunday) Set the Time Zone. Automatic power on / off schedule function. Off 08:00 18:00 Set turn-on time. Set turn-off time. DS491LT5 User Manual 21 ITEM 1 ITEM 2 DEFAULT DESCRIPTION 4. Backlight Auto Brightness Off Backlight High Level Low Level 100 10 High Level Time Low Level Time 08:00 18:00 Local Dimming UDR A. If the AUTO BRIGHTNESS is Off, the screen brightness will remain at HIGH LEVEL brightness value. B. If the AUTO BRIGHTNESS is Auto, the brightness of display will be adjusted according to the ambient light. When ambient light is bright, the screen will adjust to the High Level brightness value set; when ambient light is dark, the screen will adjust to the Low Level brightness value set. C. When the Timer (High Level Time &

Low Level Time) mode is set, the display will automatically switch the brightness according to the time set. D. When setting Mix mode, Timer and Light sensor will work at this mode. For example, setting "High Level Time

= 8:00am" and "Low Level Time =

6:00pm", the light sensor will detect environment brightness and then display will adjust the value of High Level during 8:00am and 6:00pm. Adjusts the highest brightness level. Range 0 100. Adjusts the lowest brightness level. Range 0 100. Set high level time. Set low level time. Adjusts the contrast. UDR is the highest contrast. Local Dimming 1 is the lowest contrast.

(Local Dimming 1/2, UDR) DS491LT5 User Manual 22 5. Advance ITEM 1 ITEM 2 DEFAULT DESCRIPTION Display Mode Portrait Screen Protection Off IR Control On Advance Power Off Mode Standby AC Back Status Power On Volume Reset Default Setting 50 Off Change the Menu orientation. The Menu can be displayed in either LANDSCAPE, or PORTRAIT mode. Turn on / off image burn-in protection. Set image burn-in protection interval. Range 0 100 minutes. Enable/disable the remote control for Menu. Note: When disabled, the remote control function can be enabled again from the control panel on the display or through the DynaScan Display Manager application. Standby: Background processes are still running, and remote control in normal operation. Sleep: When placed in sleep mode, background processes and remote control are not running. The display is at a minimum power state which helps conserve power when the device is not in use. IR/ Keypad working normally. Only [Keypad]

on the display or [Power Button] on the remote control can wake up the display. Choose to use the AC back status function. Power On: Display booting up when the power back after an outage. Standby: Display keeps soft-off status when the power back after an outage. Memory: Display will back to the last state when the power back after an outage. Set volume. Range 100 0. Restore all settings to default. Note: It does not modify CURRENT DATE, CURRENT TIME, DATE OF WEEK, DS491LT5 User Manual 23 OSD Password Protection Off Reset OSD Password 6. Information TIME ZONE, POWER ON TIME and POWER OFF TIME. Turn On:

Create Password > Confirm Password >

Password Protection On Turn Off:

Enter Password > Password Protection Off Enter Password > Enter New Password >

Confirm New Password > Success ITEM 1 Information ITEM 2 Model SN Resolution MCB Version FW Version Cabinet Temp. ETK Temp. DEFAULT DESCRIPTION DS491LT5 The displays model. The displays serial number. Input resolution The MCB version. The F/W version. LCD inner (backlight unit) temperature monitoring. Ambient Temp. LCD Ambient temperature monitoring. The Extension Thermal Kit (ETK203) is for ambient temperature monitoring. Some functions may not be available for all models. DS491LT5 User Manual 24 Specifications MODEL PANEL POWER MECHANICAL SPECS ENVIRONMENT I/O Ports LCD Panel Size Native Resolution Brightness Contrast Ratio Response Time Viewing Angle Life Time Panel Surface Power Supply Rated Voltage Power On Mode Standby Mode Bezel Width (T/B/L/R) Cabinet Color Monitor Dimension (LxHxD) Monitor Weight (set / package) VESA Mounting (Dimension) DS491LT5 48.5 inches 1920 x 1080 3,500 cd/m (Typ.) 3,000:1 8 ms (Typ.) 178/ 178 100,000 hrs (Typ.) AG Haze 3%, 2H Internal 100 - 240V, 50 / 60Hz 170W (Typ.) / 250W (Max.)

< 1W 8.7/8.7/8.5/8.5 mm Black 1097 x 627.2 x 82.3 mm 19.6 kg / 26.5 kg 4 Holes (400x400 mm) Operation Temperature Storage Temperature Humidity HDMI DP RS-232 Audio USB port RJ-45 Micro SD Slot Extension Connector (Mini USB) 0C ~ 45C

-20C ~ 60C 10%~80% RH Non-Condensing IN *2 IN *1 IN *1 OUT *1 IN *1 IN *2 IN *1 IN *1 (ESK only) USER INTERFACE OSD Language English Fuse 5A Design and specifications are subject to change without notice. DS491LT5 User Manual 25 Input Mode Active Resolution H Pixels V Lines Refresh Rate 480 480 600 600 768 720 768 960 1024 768 1050 900 1200 1050 720 1080 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 640 720 800 960 1024 1280 1280 1280 1280 1366 1400 1440 1600 1680 1920 1920 DS491LT5 User Manual 26 Pin Assignments RS-232 Input PIN No. NAME 01 02 03 04 05 06 07 08 09 Connected to 7&8 TXD RXD Connected to 6 GND Connected to 4 Connected to 1&8 Connected to 1&7 NC DS491LT5 User Manual 27 Troubleshooting ISSUE No image is displayed. Nothing happens when switching the main switch on. RECOMMENDED SOLUTION Check whether the cable is completely plugged in. Check whether the main switch is in the ON position, and the power cord is completely plugged in. Check whether the image sources resolution is set as the supported format (refer to section Input Mode, p.27). Check whether the cable is damaged or bent excessively. Unplug the power cord from the socket and plug it in again after a few seconds to reset the Signage. Note: Unplugging the power cord will not change the settings. Image is unstable. Check whether the cable is completely plugged in. The remote control does not work. Auto on/off does not work or does not function properly. Cannot control the display remotely via RS-232. Check whether there are batteries in the remote control. Check the batteries for freshness, polarity, etc. Check whether the remote is in the operation range. Bright light may interfere with the remote control. Please avoid using the remote control near special fluorescent lights or neon lights. Check whether the TIMER setting in the menu is set to OFF. Check whether the Power On Time and Power Off Time settings are set correctly. Check whether the RS-232 cable is connected properly. If you are still having trouble with your DynaScan DS Professional LCD, contact your dealer or DynaScan directly for more assistance. DS491LT5 User Manual 28 About DSM365 DSM365 is an internal operating system as Android, which can install the applications via USB flash drive storage, SD card or Internet. How to Switch to DSM365 Press the MENU button on either the rear panel control or remote control to show the OSD. Use the navigation arrows to select and adjust the Input Source.

[Input Source Main DSM365]

ITEM DESCRIPTION APPS Show the Installed APPS. DS491LT5 User Manual 29 www.dynascandisplay.com Copyright DynaScan Technology, Inc. All Rights Reserved. DS491LT5 User Manual 30

55 Clean Back Digital Signage 64426 | V2.00 Contents Material Contents Declaration ................................................................................................................ 1 Recycling and Energy Information ......................................................................................................... 1 Declaration of Conformity ....................................................................................................................... 2 Dclaration de conformit....................................................................................................................... 3 Safety Precautions ................................................................................................................................. 4 Prcautions relatives la scurit .......................................................................................................... 5 Important Safety Information .................................................................................................................. 6 Informations importantes relatives la scurit ..................................................................................... 7 Getting Started ....................................................................................................................................... 8 Contents ............................................................................................................................................. 8 Installing and Replacing Remote Control Batteries ............................................................................ 8 Bien dbuter ........................................................................................................................................... 9 Contenu .............................................................................................................................................. 9 Mise en place et remplacement des piles de la tlcommande......................................................... 9 Installation............................................................................................................................................. 10 Mounting ........................................................................................................................................... 10 Wall Mounting ................................................................................................................................... 13 Connecting to a Power Source ......................................................................................................... 13 Connecting an External Video Source ............................................................................................. 14 Input / Output Terminals ................................................................................................................... 15 Operating Instructions .......................................................................................................................... 16 Powering On/Off the Display ............................................................................................................ 16 Using the Remote Control ................................................................................................................ 17 Using the built-in keypad .................................................................................................................. 19 Navigating the On Screen Display (OSD) Menu .................................................................................. 20 Specifications ....................................................................................................................................... 27 Input Mode ............................................................................................................................................ 28 Pin Assignments ................................................................................................................................... 29 RS-232 Input .................................................................................................................................... 29 Troubleshooting .................................................................................................................................... 30 About DSM365 ..................................................................................................................................... 31 0 Material Contents Declaration Part Name Lead Mercury Cadmium Hazardous Substances Hexavalent Chromium Cr6+

O O O O Polybrominated Biphenyls PBB O O O O Polybromodiphenyl Ethers PBDE O O O O PCBA CHASSIS ACCESSORY PACKAGE O indicates that the level of the specified chemical substance is less than the threshold level specified in the standards of SJ/T-11363-2006 and EU 2005/618/EC. indicates that the level of the specified chemical substance exceeds the threshold level specified in the standards of SJ/T-11363-2006 and EU 2005/618/EC. Pb O O O O Hg O O O O Cd O O O O Recycling and Energy Information DynaScan is firmly committed to its environmental protection efforts and we believe that reducing our products impact on the environment is of the utmost importance. We are dedicated to meet the latest environmental protection regulations. Energy usage Mode Normal Standby Energy Consumption Max. 400 W

< 1 W Disposal Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being. When replacing old appliances with new one, the retailer is legally obligated to take back your old appliances for disposal at least for free of charge. DS552LT5-1 User Manual 1 Declaration of Conformity FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. CAUTION:

Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Manufacturer Name DynaScan Technology Corp. Manufacturer Address 6F, No. 88 Wenmao Rd., Guishan Dist, Taoyuan City 333001,Taiwan This device complies with Directive 2014/53/EU issued by the Commission of the European Community. Article 3.1(a) EN 62368-1 IEC 62368-1 Article 3.2 EN 300 328 EN 62311

- Frequency bands and Powers a. WIFI 2.4G-2412~2462MHz. b. Maximum radio-frequency power transmitted in the 2.4GHz is 50mW. Article 3.1 EN 55032 EN 61000-3-2 EN 61000-3-3 EN 55035 EN 301 489-1 EN 301 489-17 DS552LT5-1 User Manual 2 Dclaration de conformit FCC Cet appareil est conforme la section 15 de la rglementation FCC. Son utilisation est sujette aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interfrence nuisible, et (2) cet appareil doit accepter toute interfrence reue, y compris celles qui peuvent causer un fonctionnement non souhait. D CLARATION DE LA COMMISSION F D RALE DES COMMUNICATIONS Cet quipement a t test et dclar conforme aux limites d'un appareil numrique de classe A, conformment la partie 15 des rgles FCC. Ces limites sont conues pour fournir une protection raisonnable contre les interfrences nuisibles lorsque l'quipement est utilis dans un environnement commercial. Ce l'quipement gnre, utilise et peut mettre de l'nergie radiofrquence et, s'il n'est pas install et utilis conformment au manuel d'instructions, peut provoquer des interfrences nuisibles aux communications radio. Le fonctionnement de cet quipement dans une zone rsidentielle est susceptible de provoquer des interfrences nuisibles, auquel cas l'utilisateur devra corriger les interfrences ses propres frais. ATTENTION :

Tout changement ou modification, non expressment approuv par le responsable de la conformit, peut rvoquer lautorit de l'utilisateur employer l'appareil en question. Avertissement relatif aux expositions RF Cet appareil doit tre install et utilis en accord avec les instructions fournies et les antennes utilises pour cet metteur doivent tre installes de faon fournir une distance de sparation d'au moins 20 cm par rapport toute personne, et elles ne doivent pas tre co-localises ni opres en conjonction avec d'autres antennes ou metteurs. Les utilisateurs finaux et les installateurs doivent recevoir les instructions d'installation des antennes et les conditions d'utilisation de l'metteur pour satisfaire la conformit aux expositions RF. Nom du fabricant DynaScan Technology Corp. Adresse du fabricant 6F, No. 88 Wenmao Rd., Guishan Dist, Taoyuan City 333001,Taiwan Cet appareil est conforme la directive 2014/53/UE mise par la Commission de la Communaut europenne. Lrticle 3.1(a) EN 62368-1 IEC 62368-1 Lrticle 3.2 EN 300 328 EN 62311

- Bandes de frquences et puissances Lrticle 3.1 EN 55032 EN 61000-3-2 EN 61000-3-3 EN 55035 EN 301 489-1 EN 301 489-17 a. WIFI 2,4G-2412~2462MHz. b. La puissance radiofrquence maximale transmise dans la bande 2,4 GHz est de 50 mW DS552LT5-1 User Manual 3 Safety Precautions CAUTION Do not install near flammable material or any heat sources. Do not defeat the safety purpose of the grounding-type plug. Do not disassemble the display to avoid electrical shock or burn. Normal operating condition considers installation at an altitude below 2000m;

some abnormalities may be experienced when installed at an altitude above 2000m. WARNING Please power off the LCD and the video source before plugging in the DP or HDMI cable. Please installed the display in well-ventilated place, do not install in a confined space. Suitable for mounting on concrete or other non-combustible surface only. If it gives off smoke, strange smell, or unusual noise, or when it gets too hot to touch, immediately unplug the display and contact the dealer. Clean only with soft, dry cloth but not use chemical liquids, and unplug while cleaning. Do not use extreme force or any sharp or pointed objects to touch the display. Do not drop or allow any object to fall to the display. Do not operate the display with wet hands to avoid electric shock. Do not discard this product with general household waste. Please be sure to comply with the local waste regulations. This device uses, generates and radiated radio frequency energy. The radio frequency energy produced by this device is well below the maximum exposure allows by Federal Communications Commission (FCC). When a stationary or fixed image is displayed on the screen for a long time, the image may be permanently imprinted on the screen. This phenomenon is known as image burn-in and is not covered by the manufacturer's warranty. In order to avoid burn-in, avoid prolonged display of static or fixed images on the screen. Power supply cord must not be attached to the building surface, nor run through walls, ceilings, floors and similar openings in the building structure. Power cord shall be connected to a socket-outlet with earthing connection. DS552LT5-1 User Manual 4 Prcautions relatives la scurit PR CAUTIONS N'installez pas installer proximit de matriaux inflammables ou de sources de chaleur. Ne pas compromettre la scurit de la fiche de mise la terre. Pour viter tout choc lectrique ou la brlure, ne dmontez pas l'cran. Le produit peut normalement tre utilis une altitude infrieure 2000 m. Des anomalies peuvent survenir lors de linstallation de lappareil une altitude suprieure 2000 m. AVERTISSEMENT Veuillez teindre l'cran LCD et la source vido avant de brancher le cble DP ou HDMI. Veuillez installer l'cran dans un endroit bien ventil, pas dans un espace confin. Convient pour le montage sur du bton ou autre surface non combustible uniquement. S'il dgage de la fume, une odeur trange ou un bruit inhabituel, ou s'il est trop chaud au toucher, dbranchez immdiatement l'cran et contactez le revendeur. Nettoyez uniquement avec un chiffon doux et sec, sans utiliser de produits chimiques, et dbranchez-le pendant le nettoyage. N'exercez pas une force excessive et nutilisez pas d'objets tranchants ou pointus pour toucher l'cran. Ne laissez pas tomber lcran et ne laissez aucun objet tomber dessus. Afin dviter tout choc lectrique, n'utilisez pas l'cran avec les mains mouilles. Ne jetez pas ce produit avec les dchets mnagers. Assurez-vous de respecter les rglementations locales en matire de dchets. Cet appareil utilise, gnre et rayonne de lnergie radiofrquence. L'nergie de radiofrquence produite par cet appareil est bien infrieure l'exposition maximale autorise par la FCC (Federal Communications Commission). Lorsqu'une image immobile ou fixe est affiche sur l'cran pendant une longue priode, l'image peut tre imprime de manire permanente sur l'cran. Ce phnomne est connu sous le nom d'image rmanente et n'est pas couvert par la garantie du fabricant. Afin d'viter toute dtrioration, vitez l'affichage prolong d'images statiques ou fixes sur l'cran. Le cordon d'alimentation ne doit pas tre connect la surface du btiment, ni traverser les murs, les plafonds, les planchers et les ouvertures similaires du btiment. Le cordon d'alimentation doit tre connect une prise lectrique mise la terre DS552LT5-1 User Manual 5 Important Safety Information Disassembling the LCD is strictly prohibited. Opening the cover may expose the user to electric shock or other hazards. Please contact DynaScan certified service professionals for all maintenance requirements. Do not allow any liquid to enter the LCD. Also avoid placing the LCD close to water sources. Do not place heavy objects on the power cord. A damaged power cord might cause electric shock or fire. Do not bend, twist, or damage the power cord. The power cord must comply with the local safety regulations. Do not damage or modify the prongs/pins and the ground contact on the power cord plug. Do not place the LCD on an unleveled surface or an unstable vehicle. The LCD could fall over and cause substantial damage. Do not cover the vents and/or the heat sink. Do not install the LCD beside radiators or other heat sources. The installation site should have sufficient ventilation so the heat generated by the LCD can be dissipated. Do not use the Signage in a hot, humid, dusty, or fumy environment. Handle the LCD with care. Save the packaging materials for transport later. Clean the LCD backside at least once a month for dust and other particles. Damaged power cord or power plug. If liquid or foreign object has entered the LCD. If the LCD has been exposed to rain or water. If the LCD has been dropped or the casing has become damaged. If any structural damage such as cracks or unnatural vibration is found. If the LCD cannot be operated following the steps outlined in this manual. If the LCD emits smoke or other odors, or generates strange noises. Unplug the LCD immediately and contact a DynaScan certified service professional as soon as possible when any of the following situations occurs:

Operating Suggestions Cleaning the Panel Use a soft, lint-free cloth to gently wipe the dust off from the screen panel. Do not use any hard material to wipe the panel. Do not poke the panel with your hand or any sharp object (such as a pen or a nail) or exert excessive pressure on the panel to prevent any damage. Do not use any cleaning solutions on the panel as it might cause discoloration. Avoid displaying a stationary image for a long period of time in order to prevent image sticking. Unplug the power cord. Cleaning the Casing Gently wipe the casing with a soft cloth. Attention Do not use any of the following solutions to clean the casing as they may damage the paint and cause it to crack or peel: benzene solution, alkaline solution, alcohol-based cleaning solution, glass cleaner, wax, polisher, or detergent. DS552LT5-1 User Manual 6 Informations importantes relatives la scurit Le dmontage de l'cran LCD est strictement interdit. L'ouverture du capot peut exposer l'utilisateur un choc lectrique ou d'autres dangers. Veuillez contacter des professionnels de service certifis DynaScan pour tous les besoins de maintenance. Ne laissez aucun liquide pntrer dans l'cran LCD. vitez galement de placer lcran LCD proximit de sources deau. Ne placez aucun objet lourd sur le cordon d'alimentation. Un cordon d'alimentation endommag peut provoquer un choc lectrique ou un incendie. Ne pliez pas, ne tordez pas et n'endommagez pas le cordon d'alimentation. Le cordon d'alimentation doit tre conforme aux rglementations locales de scurit. Veillez ne pas endommager ni modifier les broches ou le contact de terre sur la fiche du cordon d'alimentation. Ne placez pas l'cran LCD sur une surface qui nest pas de niveau ou sur un vhicule instable. Lcran LCD pourrait tomber et causer des dgts importants. Ne couvrez pas les orifices de ventilation et / ou le dissipateur de chaleur. N'installez pas l'cran LCD ct de radiateurs ou d'autres sources de chaleur. Le site d'installation doit disposer d'une ventilation suffisante pour que la chaleur gnre par l'cran LCD puisse tre dissipe. N'utilisez pas l'affichage signaltique dans un environnement chaud, humide, poussireux ou enfum. Manipulez lcran LCD avec soin. Conservez les matriaux d'emballage pour tout transport ultrieur. Nettoyez larrire de lcran LCD au moins une fois par mois afin dliminer la poussire et autres particules. Dbranchez immdiatement l'cran LCD et contactez un rparateur professionnel certifi DynaScan ds que possible lorsque l'une des situations suivantes se produit :

Cordon d'alimentation ou fiche d'alimentation endommag. Si du liquide ou un corps tranger est entr dans l'cran LCD. Si lcran LCD a t expos la pluie ou l'eau. Si lcran LCD est tomb ou si le botier a t endommag. Si vous constatez des dommages structurels comme des fissures ou des vibrations non naturelles. Si lcran LCD ne peut pas tre utilis en suivant les tapes dcrites dans le prsent manuel. Si l'cran LCD met de la fume ou d'autres odeurs, ou gnre des bruits tranges. Suggestions dutilisation Nettoyage du panneau vitez d'afficher une image immobile pendant une priode prolonge afin d'viter que la rmanence dimage. Utilisez un chiffon doux non pelucheux pour essuyer dlicatement la poussire du panneau de l'cran. N'utilisez aucun matriau dur pour essuyer le panneau. Afin dviter tout dommage, nappuyez pas sur le panneau avec votre main ou un objet pointu

(comme un stylo ou un ongle) et n'exercez pas de pression excessive sur le panneau. N'utilisez aucune solution de nettoyage sur le panneau car cela pourrait provoquer une dcoloration. Danger de stabilit ou libell quivalent;

Le moniteur peut tomber, entranant des blessures graves ou mortelles ou texte quivalent;

Le texte suivant ou quivalent:

Pour viter les blessures, ce moniteur doit tre solidement fix au sol / mur conformment aux instructions d'installation. DS552LT5-1 User Manual 7 Getting Started Contents Confirm that the accessories below are shipped along with the display. If any item is missing, please contact your dealer. The color and shape of the accessories may vary with the products. DS552LT5-1 Professional LCD. Remote Control x 1 pc. Batteries (1.5V / AAA) x2 pcs. Power cable x1 pc. Quick Start Guide x1 pc. ESK302 x1 pc. Attention: Please use the following table to check whether the included power cord is suitable for your region. If the power cord does not match your region, please contact your local supplier. Please use matching AC socket in order to meet your local safety regulations. Plug Type North America Japan Taiwan European Continental Plug Shape Voltage NEMA TYPE IEC Display Plug IEC Plug TYPE Region U.S.A. / Canada 120V EU

(Except U.K.) 230V Japan 100V Taiwan 110V NEMA 5-15 CEE 7/7 NEMA 1-15 NEMA 5-15 IEC320 C13 Insert 2 new AAA batteries. Installing and Replacing Remote Control Batteries 1. Open the battery compartment cover. 2. 3. Close the battery compartment cover. Warning:

Incorrect usage of batteries may cause leakage or explosion. Pay attention to the polarity when installing the batteries. Do not mix different types of batteries or new and used batteries. Doing so may shorten the battery life or cause leakage. Remove or replace the batteries when they are empty in order to prevent acid leaking in the battery compartment. Do not touch the leaked substance from the batteries in case of a battery leakage. Doing so may hurt human skin. Note: If the remote control is not going to be used for a long time, we recommend removing the batteries from the remote control. DS552LT5-1 User Manual 8 Bien dbuter Contenu Vrifiez que les accessoires ci-dessous sont fournis avec lcran. Si l'un d'eux est manquant, veuillez contacter immdiatement votre revendeur. La couleur et la forme des accessoires peuvent varier selon les produits. cran LCD DS552LT5-1 Professional. Tlcommande x 1 Piles (1,5V / AAA) x 2 Cble d'alimentation x 1 Guide de dmarrage rapide x 1 ESK302 x1 pc. Attention : Veuillez utiliser le tableau suivant afin de vrifier que le cordon dalimentation fourni est adapt votre rgion. Si le cordon d'alimentation ne correspond pas votre rgion, veuillez contacter votre fournisseur local. Veuillez utiliser la prise secteur correspondante afin de respecter les rglementations locales de scurit. Type de fiche Amrique du Nord Europe continentale Japon Tawan Forme de la fiche Rgion Tension TYPE NEMA Fiche daffichage CEI TYPE fiche CEI tats-Unis /

Canada 120V NEMA 5-15 UE

(Hors R.-U.) 230V CEE 7/7 Japon 100V Tawan 110V NEMA 1-15 NEMA 5-15 IEC320 C13 Insrez 2 nouvelles piles AAA. Mise en place et remplacement des piles de la tlcommande 1. Ouvrez le couvercle du logement piles. 2. 3. Fermez le couvercle du logement piles. Avertissement :

Une mauvaise utilisation des piles peut provoquer des fuites ou une explosion. Faites attention la polarit lors de l'installation des piles. Ne mlangez pas diffrents types de piles ou des piles neuves et usages. Cela pourrait raccourcir la dure de vie des piles ou causer des fuites. Retirez ou remplacez les piles lorsqu'elles sont vides afin d'viter toute fuite d'acide dans le logement piles. Ne touchez pas la substance qui scoule des piles en cas de fuite. Cela pourrait blesser la peau. Remarque : Si la tlcommande ne doit pas tre utilise pendant une priode prolonge, nous vous recommandons den retirer les piles. DS552LT5-1 User Manual 9 Installation The LCD must be properly installed using a wall mount. Incorrect installation may cause injury or damage the equipment. Product warranty does not cover the damage caused by improper installation and DynaScan shall not be held responsible in such incident. Refer to the mount manufacturers instructions for proper installation. Mounting We recommend for at least four people to handle and mount the display. Mounting the Professional LCD on the wall is the responsibility of the user. Not all walls provide enough strength to support the LCD. The LCD may drop and cause serious injury if it is mounted on a slanted wall. Product warranty does not cover improper installation, modification, or damage caused by natural disasters. DynaScan recommends having certified professionals to evaluate the installation site and perform the mounting operation. Do not to cover the vent and/or the heat sink in order to ensure proper heat dissipation. Refer to the installation guide provided by the manufacturer for proper mounting. When mounting on a wall A wall mount is not included in the accessory. Please purchase a VESA Standard wall mount to secure the LCD. DynaScan is not responsible for the damage caused by using non-standard wall mounts. Verify that the mounting location can support the weight of the LCD before installation. The installation angle must be within 15 degrees of the vertical axis. Do not install the wall mount while the power is turned on as it may cause serious injury due to electrical shock. Model Number VESA (mm) Screw Length Number Screw Specification DS552LT5-1

(A * B) 400 * 400 M6 4 Greater than 10mm Smaller than 12mm

(not including wall mount thickness) DS552LT5-1 User Manual 10 Unit: mm B A Orientation When used in the portrait orientation, the LCD should be rotated clockwise when looking at the front of the display such that the left edge becomes the top edge. Portrait mode: Rotate the set clockwise 90 (mandatory)

<Front>

The orientation sticker can be found on the rear of display, which is for distinguishing the direction of installation. DS552LT5-1 User Manual 11 Installation Location The wall and mount must have enough strength to support the LCD and its accessories. Do not install in a location with strong vibrations or dusty. Do not install near the buildings main electric panel. Ensure the LCD is secured in such a manner that it cannot be easily removed by the general public. Leave clearance around the outer edge of the LCD (or video wall matrix) from other objects to ensure proper ventilation. For installations with screens inset into the wall, refer to section: Enclosures for cooling and ventilation considerations. Single display Maintenance Inspect the fasteners regularly for signs of loosening or deformation. Please perform appropriate corrective measures when a problem is identified. Neglecting the problem may worsen the situation. Increase the inspection frequency on areas where previous maintenance had occurred to ensure the problems do not occur again. DS552LT5-1 User Manual 12 Wall Mounting A wall mount is not included. Please purchase a VESA Standard wall mount to secure the LCD. DynaScan is not responsible for damages caused by using non-standard wall mounts. Verify that the mounting location can support the weight of the LCD before installation. The installation angle must be within 15 degrees of the vertical axis. Do not install the wall mount while the power is turned on as it may cause serious injury from electrical shock. 15 Connecting to a Power Source Using the power cable provided, plug it in the power inlet on the back of the display shown in the diagram below. Connect the power cable to a 100-240 volt, 50 / 60Hz AC power outlet. Insert the plug completely into the socket. A loose power connection may cause damage to the display and/or lead to a fire hazard. DS552LT5-1 User Manual 13 Connecting an External Video Source Turn OFF the power of both LCD and external video device. Using the DP cable (or HDMI cable) provided, insert one end into the DP-IN (or HDMI 1-IN, HDMI 2-IN) on the back of the display shown the in the diagram below. Connect the other end of the DP cable (HDMI cable) to the DP output (or HDMI output) of the video source. Refer to your video devices manual for additional information. DS552LT5-1 User Manual 14 Input / Output Terminals A. AC (IN): Connect the supplied power cord to the wall outlet. B. Power Switch: Press to switch the main power on/off. C. RJ-45 1 (IN): RJ45 network input connection. D. RJ-45 2 (IN): RJ45 network input connection. E. RS-232 (IN): RS232C network input connection for remote control from PC. F. HDMI 1 (IN): Connect the HDMI output of a PC or an AV device via a HDMI cable. G. HDMI 2 (IN): Connect the HDMI output of a PC or an AV device via a HDMI cable. H. DP (IN): Connect the DP output of a PC or an AV device via a DP cable. I. USB 3.0 port: Support for USB flash drive storage, mouse and keyboard. J. Extension Connector: Extension Connector for optional IR Extension sensor kit (ESK302). K. Micro SD card: Support for up to 128GB, FAT32 format is supported. L. Thermal: Extension Connector for optional Extension thermal kit (ETK203). M. Audio (OUT): Connect the audio signal output from Audio IN jack to an external AV device.

*USB 3.0 port: A standardized port to connect a variety of devices like mouse, keyboard, and flash drive. Support USB storage devices formatted with NTFS, FAT32 (32G) file system. A C E G I M K B D F J H L DS552LT5-1 User Manual 15 Operating Instructions Powering On/Off the Display To turn on/off the display, press the power switch on the back of the display as shown in the diagram below. ON OFF NOTE: The remote control only works when the power switch is ON. DS552LT5-1 User Manual 16 Using the Remote Control Connection using an External Sensor Kit (ESK302) Connect the ESK302 cable to the mini USB port on the side of the display, and aim the remote at the IR receiver as shown below. Meanwhile, the IR receiver on the display will be disabled. The operating range of the remote control is 2.5 meters (8 feet). NOTE: Ambient light may affect the performance of the remote control. Avoid fluorescent or neon lights in the vicinity. DS552LT5-1 User Manual 17

*Color and shape may vary by model. ITEM DESCRIPTION POWER MENU UP LEFT RIGHT DOWN OK BACK Power On / Off OSD On / Off Move the cursor up or change the setting of selected item. Exit the current selection. Select the highlighted item. Move the cursor down or change the setting of selected item. Enter (for DSM365 only) Return to the last page. (for DSM365 only) DS552LT5-1 User Manual 18 Using the built-in keypad ITEM MENU UP DOWN LEFT RIGHT DESCRIPTION OSD On / Off, Power On / Off. Move the cursor up or change the setting of selected item. Move the cursor down or change the setting of selected item. Exit the current selection. Select the highlighted item. DS552LT5-1 User Manual 19 Navigating the On Screen Display (OSD) Menu Press the MENU button on the built-in keypad or remote control to show the OSD. Use the navigation arrows to select and adjust the menu items.

*The change of each setting can only enable when you press LEFT (refer to p.19) to back to the last menu layer. 1. Input Source ITEM 1 ITEM 2 DEFAULT DESCRIPTION Input Source Main Failover 1 Failover 2 Failover 3 Command Detection HDMI 1 HDMI 2 DP DSM365 Off Set the Main input to display. Set the Failover 1 input to display. Set the Failover 2 input to display. Set the Failover 3 input to display. Only effective in Main input source. If the display didnt get both of commend and the input signal, it will change to Failover1 input. DS552LT5-1 User Manual 20 2. Picture ITEM 1 ITEM 2 DEFAULT DESCRIPTION Color Temperature USER 2 Picture Red Green Blue Contrast Gamma 60 Native Black Level Limited Select the color temperature. (User2, User1, D93, D65 and D55). Adjust the red light level. Range 0 100. Note: The feature is only supported on User2 mode. User2 mode. User2 mode. Adjust the green light level. Range 0 100. Note: The feature is only supported on Adjust the blue light level. Range 0 100. Note: The feature is only supported on Adjust the contrast level. Range 0 100. Adjusts the Gamma value. (Native, 2.2, 2.4 and sGamma) Selects the black level to adjust the screen gray scale. "Limited" for video source uses 16 to 235 levels for R/G/B, such as HDMI.

"RGB Full" for video source uses all levels from 0 to 255 levels.

"Auto" is for detecting the video source to determine its value is applicable for

"Limited" or "RGB Full". DS552LT5-1 User Manual 21 ITEM 1 ITEM 2 DEFAULT DESCRIPTION 3. Brightness Auto Brightness OFF Brightness High Level Low Level 100 10 High Level Time Low Level Time 08:00 18:00 Local Dimming UDR A. If the AUTO BRIGHTNESS is Off, the screen brightness will remain at HIGH LEVEL brightness value. B. If the AUTO BRIGHTNESS is Auto, the brightness of display will be adjusted according to the ambient light. When ambient light is bright, the screen will adjust to the High Level brightness value set; when ambient light is dark, the screen will adjust to the Low Level brightness value set. C. When the Timer (High Level Time &

Low Level Time) mode is set, the display will automatically switch the brightness according to the time set. D. When setting Mix mode, Timer and Light sensor will work at this mode. For example, setting "High Level Time

= 8:00am" and "Low Level Time =

6:00pm", the light sensor will detect environment brightness and then display will adjust the value of High Level during 8:00am and 6:00pm. Adjusts the highest brightness level. Range 0 100. Adjusts the lowest brightness level. Range 0 100. Set high level time. Set low level time. Adjusts the contrast. UDR is the highest contrast. Local Dimming 1 is the lowest contrast.

(Local Dimming 1/2, UDR) DS552LT5-1 User Manual 22 4. Time ITEM 1 ITEM 2 DEFAULT DESCRIPTION Time Current Date Current Time Day of Week Time Zone Power Control Timer On Time Off Time OFF 08:00 18:00 Set the date. Set the clock. Note: The internal clock will continue to function when the power is turned off. Set the day of week. (Monday to Sunday) Set the Time Zone. Automatic power on / off schedule function. Set turn-on time. Set turn-off time. DS552LT5-1 User Manual 23 5. Advance ITEM 1 ITEM 2 DEFAULT DESCRIPTION Display Mode Auto Screen Protection OFF IR Control ON Advance Power Off Mode Standby AC Back Status Power On Change the Menu orientation. The Menu can be displayed in either LANDSCAPE, or PORTRAIT mode. Turn on / off image burn-in protection. Set image burn-in protection interval. Range 0 100 minutes. Enable/disable the remote control for Menu. Note: When disabled, the remote control function can be enabled again from the control panel on the display or through the DynaScan Display Manager application. Standby: Background processes are still running, and remote control in normal operation. Sleep: When placed in sleep mode, background processes and remote control are not running. The display is at a minimum power state which helps conserve power when the device is not in use. IR/ Keypad working normally. Only [Keypad]

on the display or [Power Button] on the remote control can wake up the display. Choose to use the AC back status function. Power On: Display booting up when the power back after an outage. Standby: Display keeps soft-off status when the power back after an outage. Memory: Display will back to the last state when the power back after an outage. DS552LT5-1 User Manual 24 Volume 50 Reset Default Setting OFF OSD Password Protection OFF Change OSD Password Set volume. Range 100 0. Restore all settings to default. Note: It does not modify CURRENT DATE, CURRENT TIME, DATE OF WEEK, TIME ZONE, POWER ON TIME and POWER OFF TIME. Turn On:

Create Password > Confirm Password >

Password Protection On Turn Off:

Enter Password > Password Protection Off Enter Password > Enter New Password >

Confirm New Password > Success DS552LT5-1 User Manual 25 6. Information DEFAULT DESCRIPTION DS552LT5-1 The displays model. The displays serial number. Input resolution The MCB version. The F/W version. The Extension Thermal Kit (ETK203) is for ambient temperature monitoring. ITEM 1 Information ITEM 2 Model SN Resolution MCB Version FW Version ETK Temp. Some functions may not be available for all models. DS552LT5-1 User Manual 26 LCD Panel Size Native Resolution Brightness Contrast Ratio Response Time Viewing Angle Life Time Panel Surface Power Supply Rated Voltage Power On Mode Standby Mode Bezel Width (T/B/L/R) Cabinet Color Monitor Dimension (LxHxD) Monitor Weight (set / package) VESA Mounting (Dimension) DS552LT5-1 54.64 inches 1920 x 1080 4,000 cd/m (Typ.) 3,000:1 9 ms (Typ.) 178/ 178 100,000 hrs (Typ.) AR, 2H Internal 100 - 240V, 50 / 60Hz 200W (Typ.) / 270W (Max.)

< 1W 10.9/10.9/10.9/10.9 mm Black 1239.4 x 710.0 x 87.7 mm 27.5 kg / 32.5 kg 4 Holes (400x400 mm) Operation Temperature Storage Temperature Humidity HDMI DP RS-232 Audio USB port RJ-45 Micro SD Slot Extension Connector (Mini USB) 0C ~ 45C

-20C ~ 60C 10%~80% RH Non-Condensing IN *2 IN *1 IN *1 OUT *1 IN *1 IN *2 IN *1 IN *1 (ESK only) Specifications MODEL PANEL POWER MECHANICAL SPECS ENVIRONMENT I/O Ports Fuse 5A Design and specifications are subject to change without notice. USER INTERFACE OSD Language English DS552LT5-1 User Manual 27 Input Mode Active Resolution H Pixels V Lines Refresh Rate 480 480 600 600 768 720 768 960 1024 768 1050 900 1200 1050 720 1080 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 640 720 800 960 1024 1280 1280 1280 1280 1366 1400 1440 1600 1680 1920 1920 DS552LT5-1 User Manual 28 Pin Assignments RS-232 Input PIN No. NAME 01 02 03 04 05 06 07 08 09 Connected to 7&8 TXD RXD Connected to 6 GND Connected to 4 Connected to 1&8 Connected to 1&7 NC DS552LT5-1 User Manual 29 Troubleshooting ISSUE No image is displayed. Nothing happens when switching the main switch on. RECOMMENDED SOLUTION Check whether the cable is completely plugged in. Check whether the main switch is in the ON position, and the power cord is completely plugged in. Check whether the image sources resolution is set as the supported format (refer to section Input Mode, p.27). Check whether the cable is damaged or bent excessively. Unplug the power cord from the socket and plug it in again after a few seconds to reset the Signage. Note: Unplugging the power cord will not change the settings. Image is unstable. Check whether the cable is completely plugged in. The remote control does not work. Auto on/off does not work or does not function properly. Cannot control the display remotely via RS-232. Check whether there are batteries in the remote control. Check the batteries for freshness, polarity, etc. Check whether the remote is in the operation range. Bright light may interfere with the remote control. Please avoid using the remote control near special fluorescent lights or neon lights. Check whether the TIMER setting in the menu is set to OFF. Check whether the Power On Time and Power Off Time settings are set correctly. Check whether the RS-232 cable is connected properly. If you are still having trouble with your DynaScan DS Professional LCD, contact your dealer or DynaScan directly for more assistance. DS552LT5-1 User Manual 30 About DSM365 DSM365 is an internal operating system as Android, which can install the applications via USB flash drive storage, SD card or Internet. How to Switch to DSM365 Press the MENU button on either the rear panel control or remote control to show the OSD. Use the navigation arrows to select and adjust the Input Source.

[Input Source Main DSM365]

ITEM DESCRIPTION APPS Show the Installed APPS. DS552LT5-1 User Manual 31 www.dynascandisplay.com Copyright DynaScan Technology, Inc. All Rights Reserved. DS552LT5-1 User Manual 32

DynaScan Model Code : ********* Hum: ys Vd

P/N Code : 9G********

Model Name : 64426 C FE Rating : 100-240V ~ 50/60Hz 3A S/N Code CONTAINS FCC ID: 2AKWYXBP301 WINNT RREREREREEEEE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. DynaScan Technology Corp. 6F, No. 88, Wenmao Rd., Guishan Dist., Taoyuan City 333001, Taiwan Made in Taiwan

Host Label Location Information (Model: 66502) Host (Back View) Host Label Location Information (Model: 66901) Host (Back View)

DynaScan Model Code:******** Hom yi Jf

PIN Code: sa" pl tered otra Model Name: 64907 a Rating: 100-240V ~ 60/60Hz 3A aD C FE S/N Code CONTAINS FCC ID: 2AKWYXBP301 IAM ce KRRKKKKKEKEEKRKEEKE Dr eet Nn uma geen Merl une ee uo MR Reel use MTR ayo may not cause harmful interference, and 2) this device must accept any interference received, including interference that een ei ar iy PY U Roce Ma ORM Cue MeN st ume rune VCC ORE DEORE CL Label location

DynaScan Authority to Act as Agent Date: 2022/04/21 Mie Telefication B.V., Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands To Whom It May Concern:

Intertek Testing Services Taiwan Ltd (Rico Deng) is authorized to act on our behalf, unti! otherwise notified, for applications to Telefication B.V., Dept. FCC TCB. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Asson ko

(Signature) (Print name) Senior Manager On behalf of: DynaSacn

(Company Name) Telephone: +886-396-0541 ext.89741

la sll hang e r Date : 2022/4/21 This is an application for a class ii permissive change for FCC ID:

2AKWYXBP301, Original granted on 2020/6/11 NAY (=Mesa- Tate [omdar-mce)iconi (are my exe)ialeMikeaam (al-me) ale] lat-lmantere(-) Mm ial meliallam tom e(-lali(er-|mce) the previously certified device. say aXe le [Layo m= Wa les-) mmm )cere [0 (ei ar-ltql-vam BJ iJ e)(-hY eam ) e-Vale bam DNV ZaT- Kc\er- la man lele(| MeL. y-40) Sincerely, Signature Title: Senior Manager On behalf of: DynaScan Technolog

DynaScan

(Current Date)2022/04/2 1 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: 2AKWYXBP301 Pursuant to sections 0.457 and 0.459 of CFR 47, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application as:

Block Diagram Schematics Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client's signature :

Clients name & title ko/ Senior Manager Contact information / address: 6F ,No.88, Wenmao Rd., Guishan Dist., Taoyuan City 333001, Taiwan

DynaScan Authority to Act as Agent 6F,No.88, Wenmao Rd., Guishan Dist., Taoyuan City 333001, Taiwan DATE 2022/1/20 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification (FCC ID: 2AKWYXBP301) On our behalf, | appoint Chenz Ker (MRT Technology (Taiwan) Co., Ltd./ No.38 Fuxing 2"! Road, Guishan Dist., Taoyuan City, Taiwan 33377). to act as our agent in the preparation of this application for equipment certification. | certify that submitted documents properly describe the device or system for which equipment certification is sought. | also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commissions regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, | acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with Dynascan Technology Corp. / 6F,No.88, Wenmao Rd., Guishan Dist., Taoyuan City 333001, Taiwan Dated this VAIS IRTP Y Agency agreement expiration date: PAUP PIE 4E)

= IN Ae | C44 VS) AC) MAES) TELIA) Printed Title: Senior Manager On behalf of : Dynascan Technology Corp.

@uIC Class Il change Letter Date : 2022/1/20 This is an application for a class ii permissive change for FCC ID :

2AKWYXBP301, Original granted on 2020/6/11 We change the following points from the original model; the other is identical to the previously certified device. 1. Adding a host, product name: Display; brand: Dynascan; model: 64907. Sincerely, Dd \Y Signature Printed Asson Ko Title: Senior Manager On behalf of: DynaScan Technology Corp.

@uIC la Ich ngeL ter Date : 2022/1/20 This is an application for a class ii permissive change for FCC ID:

2AKWYXBP301, Original granted on 2020/6/11 We change the following points from the original model; the other is identical to the previously certified device. 1. Adding a host, product name: Display; brand: Dynascan; model: 64425 Sincerely, Asson Ko Signature Title: Senior Manager On behalf of: DynaScan Technology Corp.

DynaSean h ng R qu ee einmey, L

: October 8, 2021 er issiveC a eee est etter Date Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Description of Permissive Change To whom it may concern, Pursuant to CFR 2.1043, DynaScan Technology Corp., hereby requests a Class Il Permissive Change for the following project(s):

FCC ID: 2AKWYXBP301 (Grant Date: 06/11/2020) This project is a Permissive Change for the purpose of adding different host Display (mobile category configuration, host model: 64709, brand: DynaScan). The modification is only concerned with FCC ID: 2AKWYXBP301 module integrated into a host; neither circuit design nor main function of RF portion has been changed. Sincerely yours, Applicant DynaScan Technology Corp. Address 6F, No.88, Wenmao Rd., Guishan Dist., Taoyuan 333001, Taiwan Signature Name and Job Title. Asson Ko, ior Man E-mail asson@dynascan.com.tw Tel. +886-3-3960541

etter o t oriza Io Date: October 8, 2021 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Product Certification Representative Authorization Letter FCC ID: 2AKWYXBP301 Product Name: Digital Transmission System To whom it may concern We the undersigned, hereby authorize following person to act as our agent in the preparation of an application for equipment authorization to the FCC Rules and Regulations. Sporton International Inc. Address : No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333, Taiwan (R.O.C.) Name : Leo Huang Job Title : Manager e-mail : Leohuang@sporton.com.tw We further certify that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002(b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. Applicant DynaScan Technology Corp. Address 6F, No.88, Wenmao Rd., Guishan Dist., Taoyuan 333001, Taiwan Signature Name and Job Title Asson Ko, nior ge E-mail asson@dynascan.com.tw Tel. +886-3-3960541

er issiveC a ge eqes_ etter Date: March 18, 2021 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Description of Permissive Change To whom it may concern, Pursuant to CFR 2.1043, DynaScan Technology Corp., hereby requests a Class II Permissive Change for the following project(s):

This project is a Permissive Change for the purpose of adding different host 100" Monitor

(mobile category configuration, host model: 65406 and 65407, brand: DynaScan Technology Corp.). The modification is only concerned with FCC ID: 2AKWYXBP301 module integrated into a 100" Monitor host; neither circuit design nor main function of RF portion has been changed. Sincerely yours, Applicant DynaScan Technology Corp. 6F, No.88, Wenmao Rd., Guishan Dist., Taoyuan City 333001, Taiwan Address Signature Name and Job Title Asson Ko, Senior Manager E-mail asson@dynascan.com.tw aT=\n +886-3-3960541

L Date: March 18, 2021

| ited Singe oduarA_ roval equest etter Subject: Limited Single Modular Approval Attestation FCC ID: 2AKWYXBP301 Dear Reviewer, We, DynaScan Technology Corp. have the Digital Transmission System approved under limi ted single modular approval authorization. The application of this module is specified to mobile host equipment LCD MONITOR, Brand: DynaScan Technology Corp.n, Model: 65406 and 65407. The requirements regulated in 47 CFR 15.212 have been fulfilled and clearly explained below. The requirement of RF shielding: The shielding of the radio portion can be demonstrated in exhibition External Photo. The requirement of buffered inputs: Buffered data inputs stage has been integrated in chip RTL8822BU. The requirement of power supply regulation: The part number of the power regulator is RTL8822BU. The requirements of section 15.203 and 15.204(C): The requirements of antenna connector and spurious emission have been fulfilled. Please reference the exhibition Test Report. The requirement of stand-alone test configuration: Please reference exhibition Test Configuration Photo for the test configuration. The requirement of labeling: The instruction on the labeling rule of the end product has been stated in the users manual of this module. Please also see the exhibition Label Sample. The requirement of compliance on specific rule or operating requirements: The required FCC rule has been fulfilled and all the instructions for maintaining compliance have been clearly stated in the Users Manual. The requirement of RF exposure: The module complies with any applicable RF exposure requirement. Please do not hesitate to contact me for any questions of this request letter. Thank you. Ap plicant DynaScan Technology Corp. 6F, No.88, Wenmao Rd., Guishan Dist., Taoyuan City 333001, Address Taiwan Signature Na me and Job Title Asson Ko, Senior Manager E-mail asson@dynascan.com.tw mT=)h

+886-3-3960541

owero. ttor ey Date: March 18, 2021 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Product Certification Representative Authorization Letter FCC ID: 2AKWYXBP301 Product Name: Digital Transmission System To whom it may concern We the undersigned, hereby authorize following person to act as our agent in the preparation of an application for equipment authorization to the FCC Rules and Regulations. Sporton International Inc. Address : No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333, Taiwan (R.O.C.) Name : Leo Huang Job Title : Manager nar ll : Leohuang@sporton.com.tw We further certify that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002(b), is subject :to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. Applicant DynaScan Technology Corp. 6F, No.88, Wenmao Rd., Guishan Dist., Taoyuan City 333001, aNd Address Signature Name and Job Title. AssonKo, enior nager E-mail > asson@dynascan.com.tw Tel.

DynaScan P m hn R qu t Date: August 21, 2020 06/11/2020 er issiveC a ge e estLe ter Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Description of Permissive Change To whom it may concern, Pursuant to CFR 2.1043, DynaScan Technology Corp., hereby requests a Class II Permissive Change for the following project(s):

FCC ID: 2AKWYXBP301 (Grant Date: ) This project is a Permissive Change for the purpose of adding different host LCD MONITOR

(mobile category configuration, host model: 64606, brand: DynaScan). The modification is only concerned with FCC ID: 2AKWYXBP301 module integrated into a LCD MONITOR host; neither circuit design nor main function of RF portion has been changed. Sincerely yours, Applicant : DynaScan Technology Corp. Address : 7F, 66 Huaya 1st Road, Guishan Taoyuan 33383, Taiwan Signature Ww Name and Job Title | Asson Ko, Senior Manager Sean asson@dynascan.com.tw Tel.

DyneaScan m itm t pl L Date: August 21, 2020 Li ited Snge oduarAp rova Request etter Subject: Limited Single Modular Approval Attestation FCC ID: 2AKWYXBP301 Dear Reviewer, We, DynaScan Technology Corp. have the Digital Transmission System approved unde limited single modular approval authorization. The application of this module is specified to mobile host equipment LCD MONITOR, Brand: DynaScan, Model: 64606. The requirements regulated in 47 CFR 15.212 have been fulfilled and clearly explained below. iF The requirement of RF shielding: The shielding of the radio portion can be demonstrated in exhibition External Photo. The requirement of buffered inputs: Buffered data inputs stage has been integrated in chip RTL8822BU. The requirement of power supply regulation: The part number of the power regulator is RTL8822BU. The requirements of section 15.203 and 45.204(C): The requirements of antenna connector and spurious emission have been fulfilled. Please reference the exhibition Test Report. The requirement of stand-alone test configuration: Please reference exhibition Test Configuration Photo for the test configuration. The requirement of labeling: The instruction on the labeling rule of the end product has been stated in the users manual of this module. Please also see the exhibition Label Sample. The requirement of compliance on specific rule or operating requirements: The required FCC rule has been fulfilled and all the instructions for maintaining compliance have been clearly stated in the Users Manual. The requirement of RF exposure: The module complies with any applicable RF exposure requirement. Please do not hesitate to contact me for any questions of this request letter. Thank you. Applicant DynaScan Technology Corp Address 7F, 66 Huaya 1st Road, Guishan Taoyuan 33383, Taiwan Signature Name and Job Title | Asson Ko, Senior Manager etal asson@dynascan.com.tw

DynaScan Date: May 4, 2020 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Declaration of composite/rated equipment for FCC ID: 2AKWYXBP301 To Whom it may concern, We, the undersigned, would like to declare that the composite portion catagorized as Class A digital devices, peripherals & external switching power supplies has been authorized under the Supplier's Declaration of Conformity (SDoC) procedures. Sincerely, Applicant DynaScan Technology Corp. Address 7F, 66 Huaya 1st Road, Guishan Taoyuan 33383, Taiwan Signature VY ; ae Name and Job Title. Asson Ko, Senior Manager Sear asson@dynascan.com.tw aT-)n +886-3-3960541