QUICK START GUIDE WELCOME TO YOOZER!
Thanks for getting your hands on Yoozer headphones. If this is your rst Yoozer product, welcome to the Yoozer family!
Whether you bought these to keep noise out on long
ights or just to listen to your favorite beats, you are on your way to a premium audio experience. Lets get started by setting up your Yoozer head-
phones. SETUP STEP 1 Turn on your Yoozer Headphones by pressing and releasing the Power/Bluetooth button. The LED status light will ash blue and red alternately to show that the headphones are in Bluetooth pairing mode. STEP 2 Make sure your mobile device and Yoozer head-
phones are ready to connect. Enable Bluetooth on your device. Keep your mobile device nearby during the pairing process. Select and pair Bluetooth Name:
Yoozer Comfort to complete setup. FREQUENTLY ASKED QUESTIONS HEADPHONES WONT CONNECT WITH BLUETOOTH DEVICE NO SOUND IS COMING FROM THE HEADPHONES BATTERY LIFE IS SHORTER THAN EXPECTED Make sure your headphones are fully charged (leave your Yoozer headphones plugged into the charger for at least two hours). The power consumption will be greater in the call state than in the music playing state, and the working time may be decreased if used extensively for calls. STATUS INDICATORS Green light high Noise cancellation ON Green light weak Ambient sound mode Green light o Noise cancellation OFF Flashing blue and red Power on and pairing Solid red Charging in process Light o Fully charged Flashing blue Pairing complete IN THE BOX Active Noise Cancelling Headphones 1 Carrying Case 1 USB-C Charging Cable 1 3.5 mm Audio Cable 1 WARNING/CAUTION BASIC OPERATIONS POWER ON/OFF Long press the Power/Bluetooth button to turn on your headphones. The LED status light will ash blue. Long press the Power/Bluetooth button while your headphones are on to turn them o. The LED status light will turn o. BLUETOOTH PAIRING Press and hold the Power/Bluetooth button for 2 seconds until the status light ashes blue and red alternately or until you hear the prompt tone. Note: Your Yoozer headphones can only play audio from one device at a time. CHARGING To charge your Yoozer headphones, plug the included charging cable into the USB-C port. The LED status light will turn red. Once your Yoozer headphones are fully charged, the status light will turn o. Note: The headphones will turn o automatically when low battery. Please allow up to 3 hours to fully charge the headphones. You can not play audio or use active noise cancelling while charging. MUSIC CONTROLS PLAY/PAUSE Press the Play/Pause button once to toggle between playing and pausing audio. VOLUME UP/DOWN Press the Volume Up button to adjust the volume up and the Volume Down button to adjust the volume down. PREVIOUS/NEXT Press and hold the volume down button to 1.5 seconds to go to the next track. Press and hold the volume up button for 1.5 seconds to go to the previous track. Noise cancellation on / o / Ambient sound switch Volume up / Skip forward button Power / Bluetooth / Play / Pause / Call control button Volume down / Skip backward button Audio jack USB Type-C charging port ACTIVE NOISE CANCELATION
(ANC) CONTROL Press the ANC button to toggle through the ANC modes. ANC Maximizes noise cancellation to reduce environmental noise and create a private, immersive audio experience. TRANSPARENCY Turns o noise cancellation and amplies environmental sound to hear whats happening around you. CALL CONTROL ANSWER CALL/END CALL Press the Play/Pause button once to answer an incoming call or to end an active call. REJECT A CALL Long-press (2-seconds) the Play/Pause button to reject an incoming call. STORING YOOZER HEADPHONES STEP 1 Adjust the headband to the smallest size. STEP 2 Fold the left ear cup in rst, followed by the right one. STEP 3 Place in the included carrying case. Note: Make sure to wipe the outside surfaces with a soft, dry cloth to prevent moisture and oil damage during storage. Do NOT use water or any cleaning chemicals when wiping down. Do NOT allow moisture to get inside the ear cups or the port. FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. FCC ID: 2A4ND-SE7D SPECIFICATIONS Product Name: Active Noise Cancelling Headphones Product Weight: 0.57 lb (260 g) Power: 750 mAh DC 3.7V Operating Temperature: 32F ~ 104F (0C ~ 40C) Operating Humidity: 85%RH Storage & Transport temperature: -4F ~ 140F (-20C ~
60C) Storage and Transport humidity: 95%RH Warranty information: 12-month limited warranty Bluetooth and associated logos are registered trademarks owned by Bluetooth SIG, Inc. Any use of such marks by YOOZER LLC. is permitted under license. Other trademarks and trade names are those of their respective owners.