FCC ID: PIY-HGV8521A5T HOT WHEELS RC Lightyear Space Mission Explorer Vehicle

00007-1850-G3 FCC yer for 2.4 GHz RC item only size: 138 x 175 (mm) FOR PRODUCT SOLD IN USA POUR LES PRODUITS VENDUS AUX TATS-UNIS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. NOTE: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the users authority to operate the equipment. Cet appareil est conforme l'article 15 de la rglementation de la FCC. L'utilisation de ce dispositif est autorise seulement aux deux conditions suivantes :

(1) il ne doit pas produire de brouillage nuisible, et (2) l'utilisateur du dispositif doit tre prt accepter tout brouillag e radiolectrique reu, mme si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. Cet appareil a t test et jug conforme aux limites de la classe B pour un appareil numrique en vertu de l'article 15 de l a rglementation de la FCC. Ces limites ont t instaures pour fournir une protection raisonnable contre toute interfrence nuisible dans une installation rsidentielle. Cet appareil gnre, utilise et peut mettre de l'nergie radiofrquence. S'il n' est pas install et utilis conformment aux instructions, il peut provoquer des interfrences sur les communications radio. Cependant, il n'est pas garanti que des interfrences ne se produiront pas dans certaines installations. Si cet appareil cause des interfrences la rception radio ou tlvise (ce qui peut tre vrifi en teignant l'appareil puis en le remettan t sous tension), l'utilisateur peut tenter de les rsoudre en suivant une ou plusieurs des mesures ci-aprs :

Rorienter ou dplacer l'antenne rceptrice. Augmenter l'espace entre l'appareil et le rcepteur. Brancher l'appareil sur une prise de courant diffrente de celle sur laquelle le rcepteur est branch. Pour obtenir de l'aide, contacter le vendeur ou un technicien radio/tlvision expriment. REMARQUE : Tout changement ou modification de cet appareil n'ayant pas t expressment approuv par les parties responsables de sa conformit peut entraner l'annulation du droit d'exploitation de l'quipement par l'utilisateur. FOR PRODUCT SOLD IN CANADA POUR LES PRODUITS VENDUS AU CANADA CAN ICES-3 (B)/NMB-3(B) This equipment complies with FCC & Canada radiation exposure limits set forth for uncontrolled environments. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet quipement est conforme aux limites dexposition aux radiations dfinies par le Canada pour des environnements non contrls. Cet metteur ne doit pas tre install au mme endroit ni utilis avec une autre antenne ou un autre metteur. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). L'metteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR d'Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Operation is subject to the following two conditions:

(1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. L'exploitation est autorise aux deux conditions suivantes :

(1) L'appareil ne doit pas produire de brouillage; (2) L'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. 00007-1850-G3

Mattel Asia Pacific Sourcing Ltd. Date: 12/28/2021 Federal Communication Commission Equipment Authorization Branch PEELE.) delarem iicmcer-le|

Columbia, MID 21046 We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) and Kobe Jian in SGS-

CSTC Standards Technical Services Co., Ltd. (SGS) to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). This authorization is valid until further written notice from the applicant. Print Name: Joule Mak bal Title: Director, Electronic Engineering NEU On behalf of Company: Mattel Asia Pacific So Telephone: 31855000 E-mail: Joule: Mak@mattel.com store Tael ale ome miMihaeeiecaie FCC ID: PIY-HGV8 21A5T Where our agent signs the application for certification on our behalf, | acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Mattel Asia Pacific Sourcing Ltd.

attel Asia Pacific Sourcing Ltd Feaeral Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within confidential period, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. Nea Print Name: Joule Mak Title: Director, Electronic Engineering Sa] H On behalf of Company: Mattel Asia Pacific Sourcing Telephone: 31855000 E-mail: Joule.:Mak@mattel.com Regarding: Confidentiality Request regarding application for FCC ID: PY HGV& = 1A5ST Schematic(s) Block Diagrams Operational Descriptions External Photos Internal Photos Test Setup Photos User manual(s)