01 Package List 02 Bluetooth Connect Power On When you open the host case, the LivePods will power on automatically. Host*1 livepods*2 Dual Type-C Charging Cable*1 User Manual*1 Silicone Ear Tips*2 Power O When you put the LivePods into the host and close the case, the LivePods will power o automatically. Free Gift Type-C To Lightning Converter*1 Type-C To USB Converter*1 Bluetooth Connection Turn on your bluetooth in seings , search the available device, and click
"ThriveAudio S1" to pair it. Product Introduction 03 05 01 02 06 02 06 04 01 07 04 05 03 Bluetooth Bluetooth ThriveAudio S1 03 "TWS MODE"
Touch Control Instructions 05Show Mode Control Instructions Operation Note Feature One Click Double Click Triple click L L L or or or Long-press L Long-press R R R R Music: Play/Pause Call: Answer Music: Next track Call: Reject/End Music: Previous track Music: volume down Music: volume up 3s 3s Operation Long press for 2 seconds Note Feature Mode switch The host wil automatically switch back to TWS Mode when the baery of the host is below 15%. Single Click Sound eect switch Switch between four sound eects: Hall Reverb, Space Reverb, Room Reverb, and Original Sound in a loop Single Click Microphone input volume increase The maximum volume level is 10. When the volume reaches level 10, the LivePods will prompt a beep sound. Note: When using the left or right LivePods individually, volume adjustment via LivePods touch control is not supported. Single Click Microphone input volume decrease The minimum volume level is 0. When the volume reaches level 0, the LivePods will prompt a beep sound. Long press both for 2 seconds Two indicator lights keep orange In-ear monitoring o 04 Show Mode How to Switch to "Show Mode"
Host 1.Mode Switch Buon 2.Microphone (Built-in Component) 3.Host Volume Buon 4.Host Volume Buon 5.Host volume Indicator Light 6.Host volume Indicator Light 7.Type-C Charging Port LivePods 1. LivePods light indicator light 2.secondary microphone for LivePods 3. Main Microphone for the LivePods 4. Silicone Ear Tips 5. Charging Pin 6. Touch Control Area Switch to "TWS Mode"
If the host is in "Show Mode"(the indicator light of the host keeps green), press the main buon for 2 seconds. S1 will switch to "TWS Mode"
( the indicator light of the host turns o). Note:If LivePods prompts Show Mode" after switching, but the host indicator light is ashing green, it means the connection between the LivePods and the host fails. Clear Bluetooth pairing information:
Please put both LivePods back into the host and keep the host case is open, then long-press the host volume for 5 seconds. The host indicator light will ash between orange and green. Once pairing is successful, the green light will remain on. In "TWS Mode", place both livepods back into the host, then long-press the host volume for 5 seconds while the cover is open. the host indicator light will ash alternately between orange and green. Once pairing is cleared, the indicator light will turn o. If in "TWS Mode", press the host main buon for 2 seconds. The host will switch to "Show Mode"(the host indicator light will stay green). Press any buon when in-ear monitoring is o Two indicator lights keep green In-ear monitoring on 06 How to Use S1 in Show Mode?
6.1 Singing/Practice Singing & Karaoke Scenario Sing for Fun:
If you just enjoy singing, no need to save your songs after singing, you can just use them wirelessly. The host will play as a professional HD microphone+audio interface+in-ear monitoring system. Music/
Karaoke App Music Accompanying Music In-ear Monitor +
Accommpanying Music ECM Microphone+
Audio Interface Sing for Sharing (Recommended):
If you want to save the song and playback and share after singing, please connect the host to your phone with the cable. This will make sure the accompanying music and your voice are together when you playback. Karaoke APP ECM Microphone+
Audio Interface HD S ing ing Inpu t+
Loss less Accompany ing Mus ic In-ear Monitor +
Accommpanying Music Mobile Studio S1 Wireless IEMs LivePods User Manual www.thriveaudiotech.com 09 FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit dierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled This equipment should be installed and operated with minimum distance 0cm between the radiator and your body. 08 Warranty Regulations 1. We provide one-year warranty service from the date of product purchased. Free gift accessories provided with the product are not covered under warranty. During normal use of the product, if there is a performance failure not caused by human-made error, free maintenance service will be provided. 2. Please send the product for repair along with the packaging box, completed warranty card, and purchase receipt to the designated location of our company for maintenance. 3. If any of the following situations occur, consumers cannot enjoy the warranty rights:
a.Non-genuine product b.Damage caused by man-made factors, including damage resulting from abnormal usage environments, failure to follow instructions for use and storage, etc. c.Damage caused by force majeure. Hearing Loss Prolonged exposure to high volume levels may aect hearing health. It is recommended not to use excessively high volume levels. Baery Note: Using the wrong type of baery pack may cause safety protection failure.
- Do not place the baery pack in extremely high-temperature environments;
if severe swelling occurs, do not continue to use it. Charging Use a charging cable with a power adapter or computer to charge the charging case. It is recommended to place the charging case with the status indicator facing upwards to avoid prolonged contact with high temperatures. When the device is charging, avoid prolonged skin contact with it. Product Light Display Explanation:
Product Function State Power On/O Bluetooth Disconnected Bluetooth Connected Light Display Steady on for 1 second One livepod is ashing quickly while the other is ashing slowly. Both LivePods synchronize to ash once every 5 seconds. the host is not paired with the LivePods The green light is ashing simultaneously the host is paired with the LivePods The indicator lights keep green. Suicient baery Low baery Charging Fully charged The green light is constantly on The orange light is ashing simultaneously The orange light is ashing alternately at a slow pace The green light is ashing alternately at a slow pace 07 Specification Product Specification Brand: ThriveAudio | Product Name: Mobile Studio S1 Wireless IEMs LivePods | Model: S1 6.3 Live-streaming If you want to try a live-stream, you can use it as follows:
Live-streaming without Accompanying Music If theres no accompanying music while youre live-streaming. Connect the host to your own smartphone/PC with the cable, hold the host as your microphone, open the live-streaming app and start your live-streaming. 6.2 Recording the song/recitation | Vlog Recording Recording the Singing/Reciting without Accompanying Music If you're planning to record a singing/reciting without accompanying music. Connect the host to the phone/PC with the cable. Take the host as the microphone, and start recording, then save your work in your phone/PC. LivePods Baery Capacity: 50mAh | LivePods Input: DC5V=110m LivePods Charging Time: 45mins Live-streaming App Host Baery Capacity: 650mAh | Host Input: DC5V=750m | Host Charging Time: 60mins Wireless Real-time In-ear Monitor LivePods Period in TWS Mode : 3.5-4Hours/per full charge with Charging Case: 14-16 Hours LivePods Period in Show Mode : 3.5 Hours/per time with Charging Case: 6-7 Hours Microphone Microphone Type: ECM Capacitive Microphone | Frequency Range: 20Hz-20kHz Equivalent Isotropically Radiated Power (EIRP): <20dBm Frequency Response: 100Hz-20kHz Distortion: 0.1% | Sensitivity: -391dB | Operating Frequency: 2.400-2.4835GHz Audio Interface Audio Interface Chip: BAJIN A1 | Latency: 30ms | Input Gain:0-10 levels Sound Eects: Hall Reverb, Space Reverb, Room Reverb, and Original Sound Noise Cancel Levels: 0-5 Levels HD Voice with Noise Canceling+Sound Eect Pushed into Live-streaming with Accompanying Music 1. Pair the LivePods with the phone/PC/tablet A by bluetooth that will play the accompanying music. 2. Use the cable to connect the host to live-steaming phone/PC/tablet B. 3. Take the host as the microphone, open the live-streaming app and do live-streaming on B. 4. Control the accompanying music PLAY/PAUSE on A. Your voice and accompanying music will be pushed into live-steaming platform together. Recording the Singing/Reciting with Accompanying Music When you need accompanying music during a recording session, follow these steps:
1. Pair the LivePods with the phone/PC/tablet A that will play the accompanying music. 2. Use the cable to connect the host to the phone/PC/tablet B where the recording will be saved. 3. Hold the host as the microphone. Click the "recording start" buon on device B, play the accompanying music on device A, and start singing or reciting, or your work creatation. Live-streaming App B Wireless Real-time In-ear Monitor A Accompanying Music B Accompanying Music + Your HD Voice Input+
Sound Eect Accompanying Music A Note:theres noise canceling algorithm inside the host, please increase the volume of the host if theres a noise around you. The bigger the volume is, the stronger the noise canceling will be. Note: "Show Mode" prioritizes displaying the mode indicator light. HD Voice with Noise Canceling+Sound Eect+
Accompanying Music Pushed into