60x90mm 105G MG13 21 MG13 2 in 1 magnetic wireless car charger USER MANUAL 2 1 1 2 3 4 Type-c 1 3 LED 5 6 7 3 4 5 6 7 5S 1 17mm 5V/2A, 9V/2A,12V/2A QC3.0 ,PD 21 5W, 7.5W, 10W, 15W (Max)
: 2.5 W
: -10 ~ +45
: 115K~205KHz
: 300-350KHz 4mm 1.7KG iPhone 12 / 13 / 14 / 15
, 12 2 4 QC3.0
, 2LED LED 515W 34mm 4mm 4
, 1. 2. 3. ,
*1
*1 Type-C *1
*1 Product specication FCC Warning Warranty 2 7 1 3 4 1 2 3 4 Mobile phone Wireless Charging Area Apple Watch Wireless Charging Area Charging indicator light Type-C interface Working Process 5 6 7 Screw Cap Rotating locking tail clip Air outlet clip 1 Fasten the nut on the clamp ball 2 Snap the ball into the slot 3 Tighten the nut 4 Rotate the tail clamp to lock the air outlet blades Functional component Lighting mode 5 6 Mode Indicator light Power on Charging Indicator light always on Indicator light breathing Full Charged Indicator light always on 3.The best distance of wireless charging is within 4mm, and it cannot penetrate metal, so it is necessary to avoid using metal or too thick (over 4mm) mobile phone case, so as to ensure fast wireless charging of mobilephone. 4.After the phone is removed from the product, the indicator will immediately show the standby status . When the car engined off and the power supply stops, the indicator light goes off. The mobile phone is still attached to the product by magnetic force and can be taken off at any time. Foreign object detected Red light flashes quickly for 5seconds and goes out, and be restored after foreign object removed iWatch charging No indicator light Air vent mount A ball head that can be rotated at will Adjust the clip opening and closing by rotating. Upper and lower support plate
~ +45 5W, 7.5W, 10W, 15W (Max) 5V/2A, 9V/2A,12V/2A QC3.0 ,PD 2 in 1 magnetic wireless car charger Model Input Output power Watch: 2.5W Working temperature: -10 Charging frequency Phone: 115K~205KHz Watch: 300-350KHz Induction distance Magnetic attraction Function: Breath light indicator (mobile phone charging light for breathing, watch without indicator light) Compatible phones: iPhone 12/13/14/15 bare phone or with magsafe cases or the other phones with magsafe cases or magnetic rings. 4mm 1.7KG Direction for use 1.Assemble and tighten the product and the accessories through the ball head nut (compatible with other ball head diameter 17mm accessories), and fix in the ideal position. Connect the product with a QC3.0 car charger (optional) with the data cable, and plug in the cigarette lighter to take power. 2.Multicolored light turns on after power on and wait for the phone to be placed. After placed the phone, the magnetic suction force automatically absorbs the phone, and the coil is aligned. The product will start wireless charging, the indicator light goes off at the same time; If the phone doesn't support wireless charging or if it detects a metal foreign object, the light flashes alternately for 5 seconds and then goes off. The maximum charging power of this productis 15W, and the charging efficiency will vary according to the charging environment and mobile phone. A clip that goes deep into the air vent. Caution 1. For smartphones that are not magnetic, please add a magnetic ring before using this product. 2. Do not over squeeze or collide with the equipment. 3. Please do not place it too close to the magnetic card (ID card, bank card, etc.) with magnetic stripe or chip to avoid magnetic card failure. Not suitable for circle air vent!
Adjust the position of the top piece of the air outlet and the rotatable clip assembly according to the position of the air outlet blade; insert the blade and select the lock switch position according to the thickness of the blade; suitable for one-key locking of the air outlet of most cars. Silicone touches the car, tighter and fits better to protect the car from scratches. Package Wireless charger*1 Air vent mount*1 Type-C cable*1 User manual*1 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
receiver.
from that to which the receiver is connected.
for help. FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance between 20cm the radiator your body. Reorient or relocate the receiving antenna. Increase the separation between the equipment and Connect the equipment into an outlet on a circuit different Consult the dealer or an experienced radio/TV technician The three guarantee period of this product: from purchasing date
(Prevail to the customer receipt date or invoice date), provide 12 months guarantee. product surface man-made damage,accessories missed are not include in this guarantee, repair service for the product is out of the guarantee period or not covered by warranty ,customer need to pay the repair charge. Product Warranty Card For your rights and interests, please fill in carefully and keep it properly as a pre maintenance voucher!
Do not modify the content without authorization, otherwise it will be deemed invalid. The company reserves the final right to interpret the after-sales service regulations of the product.