TWS11 Wireless Earphone with Bluetooth User Manual

TWS(true wireless stereo)earphones V5.0 Manual Specifications:

True wireless stereo (TWS), real no wires design, individual left and right channel, HIFI sound, both the left and right earbud are Bluetooth enabled, could be used separately, or used as one pair. Bluetooth version:

V5.0 (both sides), ultra low consumption Bluetooth Mode:

Bluetooth Frequency:

Bluetooth Range:

A2DP1.3/HFP1.6/HSP1.2/AVRCP1.6/D11.3. 2.4GHZ 12 meters with no obstacles Battery capacity:

Earbud: 50mah rechargeable Li-ion battery Charging dock:400mah (optional) Talk/Play time:

Standby time:

Single earbud mode:4-5 hours One Pair earbuds mode:3-4 hours Single earbud mode:100 hours One Pair earbuds mode:60 hours About pairing:

1. Pairing with one earbud: Long press the Multi-Function button until the LED flashing in red and blue alternately, then turn on the Bluetooth on your device and select TWS on your list, (there would be reminding voice saying connected), then you could enjoy music or making phones calls. It supports reporting incoming calls. 2. Pairing with both sides:

A. Long press the multi-function buttons of both sides at the same time until the led flashing in red and blue alternately, then double click EITHER side to enter pairing mode, (there would be reminding voice "ready to pair") then turn on the Bluetooth on your device and choose TWS to connect. When the led flash slowly in blue (3-5s) , they pair successfully with voice. Note: The call support both side Bluetooth earphone,shut down,play and suspension can be controlled by any one of the multi-function keys connected earphone,and another headset will be synchronized control. The boot will be directly long press the multi-function button to turn on automatically back at the next time. Bluetooth usage:

1. Making phone calls:

Be sure the earphone connected with your mobile phone, and then you can make phone calls. When making calls, both sides earphone working, and there is incoming call, it would broadcast calling numbers. You answer the call by slightly press the power button one time and refuse to answer by long press the power button 2 seconds. Click the button 3 times to redial last number. 2. Voice control When the earphones are in music mode, you can enter voice control by quick press the power button 2 times. 3. Listening to music:

Be sure the earphone connected with your mobile phone, then you can listen to music on your music list. Shortly press the power button to stop the music and replay by press again. Long press right earphone to play next song, long press left earphone to play previous song. 4. Power off. Long press the power button until led in red when not use, the Bluetooth device enter off mode. lt would be power off automatically when the earphone away from your Bluetooth device over 5 minutes. No need to worry power exhausted. 5. Charging:

There is reminding sound when battery is low, and the led would flash in red at the same time. When taking charge, the led would be in red, and turns in blue when fully charged. Note:the earphone would be forced to shut down when charging even if they are power ON before charging. Warnings:

1. Please do not overuse this earphone or put it under heavy pressure, keep away from wet and heat. 2. Keep away from WIFI, router or other high frequency transmitting equipment to prevent interruption of signal receiving. 3. Please use this earphone under its working range (10meters), and the effect would be better if there is no obstacle between the connected devices. 4. Use this Bluetooth earphone to connect any device with Bluetooth function Summary 1 2 3 4 5 6 Dust-proof mesh Multi-function button MIC Charging port Charging Box Light Android Charging port Please do not overuse this earphone or put it under heavy pressure, NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.