FCC ID: 2AMWY-T1 Wireless Headphone

Headphone Power On Press and hold the power button for 3 seconds to turn on. After powering on it will automatically enter pairing mode, and the Bluetooth indicator light will flash alternately between red and blue. Click to volume +

Long press for power on/off pause/play, answer/hang up a calls In power-off state long press for 8 seconds to clear pairing. FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Appendix ID Label Wireless Headphone FCC ID: 2AMWY-T1 Model:picun T1 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. FCC ID: 2AMWY-T1 TB-RF-074-1.0 Appendix ID Label Location FCC ID: 2AMWY-T1 TB-RF-074-1.0

2407, Building 11, Phase II, Tianan Yungu Industrial Park, Gangtou Community, Bantian Street Longgang Shenzhen PINCUN digital technology Co., Ltd. District, Shenzhen City, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-3-18 To whom it may concern:

We, Shenzhen PINCUN digital technology Co., Ltd., hereby certify that for which authorization is sought FCC ID:2AMWY-T1 is not covered equipment prohibited from receiving an equipment authorization pursuant to 2.903 of the FCC rules. the equipment We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing covered equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(b) and (d)(5) and (6). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, 3 0 V

, U

) i i

d n a Signature Ai Willian Shenzhen PINCUN digital technology Co., Ltd.

) i

) 5

) d

1 1 9 2 _ u q E d e r e v o C

l e d o m

_ 2 6

Shenzhen PINCUN digital technology Co., Ltd. Add: 2407, Building 11, Phase II, Tianan Yungu Industrial Park, Gangtou Community, Bantian Street Longgang District, Shenzhen City, China Date: 2024-3-18 FCC ID: 2AMWY-T1 Dear Sir/Madam, We, Shenzhen PINCUN digital technology Co., Ltd. Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model:

Product name: Wireless Headphone Model no.: picun T1, picun X5, picun A2, picun A5, picun A6, kofire V1 Sincerely, Name/Title Ai Willian/

Company:

Address:

Shenzhen PINCUN digital technology Co., Ltd. 2407, Building 11, Phase II, Tianan Yungu Industrial Park, Gangtou Community, Bantian Street Longgang District, Shenzhen City, China 18575581068 020-26509195 Willian@picun.com.cn Phone:

Fax:

E-Mail:

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2024-3-18>

Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID 2AMWY-T1 Model name picun T1 For the product stated above, we request confidential;

that the following information be held Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days Exhibits External Photos Internal Photos Block Diagram Schematics Test Setup Photos Users Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our information that could be of benefit to our competitors. trade secrets and proprietary The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title Ai Willian Company:

Address:

Shenzhen PINCUN digital technology Co., Ltd. 2407, Building 11, Phase II, Tianan Yungu Industrial Park, Gangtou Community, Bantian Street Longgang District, Shenzhen City, China 18575581068 020-26509195 Willian@picun.com.cn Phone:

Fax:

E-Mail:

2407, Building 11, Phase II, Tianan Yungu Industrial Park, Gangtou Community, Bantian Street Longgang Shenzhen PINCUN digital technology Co., Ltd. District, Shenzhen City, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-3-18 To whom it may concern:

We, Shenzhen PINCUN digital technology Co., Ltd. the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID:2AMWY-T1 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins current valid General Terms and Conditions

(AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title Ai Willian/

Company:

Address:

Shenzhen PINCUN digital technology Co., Ltd. 2407, Building 11, Phase II, Tianan Yungu Industrial Park, Gangtou Community, Bantian Street Longgang District, Shenzhen City, China 18575581068 020-26509195 Willian@picun.com.cn Phone:

Fax:

E-Mail:

2407, Building 11, Phase II, Tianan Yungu Industrial Park, Gangtou Community, Bantian Street Longgang Shenzhen PINCUN digital technology Co., Ltd. District, Shenzhen City, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S. Agent Designation 2024-3-18 Shenzhen PINCUN digital technology Co., Ltd. acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought FCC ID:2AMWY-T1 Name and company of U.S. agent:

Physical U.S. address of agent:

FRN of U.S. agent:

Email address of U.S. agent:

ACT Lab LLC 3280 East 59th Street Long Beach, CA 90805 United States 0033465568 shuber@act-lab.com ACT Lab LLC acknowledges their obligation to accept service of process on behalf of Shenzhen PINCUN digital technology Co., Ltd. Shenzhen PINCUN digital technology Co., Ltd. with the FRN 0026679084 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature Ai Willian Shenzhen PINCUN digital technology Co., Ltd. Signature Scott Huber Senior Technical Director ACT Lab LLC 5 0 V

, U

) 7

) d

1 1 9 2 _ t n e g A _ S U

l e d o m

_ 8 4