80mmX120mm 80 mm Introduction Built-in equalizer to make the picture smooth, clear, and stable Easy to install, plug and play, no need to setting Application diagrams Physical interface diagram Interface Introduction Connection instruction HDMI wireless extender uses the standard 802.11AC protocol, transmitting high-denition video and audio signals through 5G WiFi network, this could transmit the HD signal from dierent devices like DVD, CD player, PC through WiFi network, to realize one-to-many devices transmitting. This device also has excellent graphic computing and transmitting performance that could make the signal smoother and more stable. Application 1: One-to-one application Specications Maximum video resolution: 1920X1080 @60Hz WiFi protocol: standard 802.11 b/g/n/ac Maximum distance: Up to 200m in one space Power output: 9V5V/2.5A Maximum power consumption: MAX 25W Dimensions (LxWxH): 109 x 70 x 45mm Working temperature/humidity: 0 -45 / 10% - 80%RH
(Non-solidication) PC camera DVD STB PS3 HDMI Cable TV TV 1. TransmitterTX HDMI Cable Projector DS-PAD TX RX HDMI Wireless Extender Enjoy the vivid world m m 0 2 1 Features Long distance HDMI video and audio signal transmitting through WiFi, up to 200m Supporting one-to-many application, pair up to 4 receivers Compatible with HDMI 1.4, 1.3 standard Work with HDCP 1.4 standard - High-bandwidth Digital Content Protection Automatically compatible with multiple specs and display mode installation 1 2 User Manual Ver. 1.0 1. Install the antenna as shown in the diagram;
2. Install batteries (compatible with NP-F750/F770 series batteries);
3. Press and hold the power button to turn on the device. Application 2: One-to-many application TV 2. ReceiverRX PC camera DVD STB PS3 HDMI Cable TX RX Ports specications
. ON-OFF Switch
. Indicator Light
. Power port(DC12V)
. HDMI in
. HDMI out 1. TransmitterTX UCNCT
(0) Fluency Device Info Scene Mode Switch Channel Reset language Exit Main interface Catalog menu Function:
Device ID Frequency point display Prole Power supply mode Number of connections ports specications
. ON-OFF Switch
. Indicator Light
. Power port(DC12V)
. HDMI out 2. ReceiverRX UCNCT Fluency Version Switch Channel Reset language Exit 1. Install batteries (or connect to power) on the transmitter and receiver separately. 2. Press and hold the power button for 2 seconds before releasing it. 3. Turn on the screen when it is lit. 4. You can enter the menu to set according to your needs. Product pairing Connect the HDMI OUT of the receiver (RX) with the HDMI IN of the transmitter (TX) using an HDMI cable, and after pairing, the screen displays "Connected".(Please install the battery and keep it fully charged when pairing) Main interface Catalog menu Function:
Device ID Frequency point display Prole Power supply mode Connection display PS: Product has been paired in factory settings. If any pairing failure during user operating, please reset the device, and following the instruction above to redo the pairing process. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.ct. This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.