QUICK BUTTON COMMAND PMN:Helmet bluetooth headset Motorcycle Intercom X10 Tips:
1Product Overview Battery Prompts 3Phone Call Enable Auto-answering call Play Backward Button Play Forward Button Jog Dial Tap X2 Power is %
Usable Power Connect Phone (Power off status) Low Battery Prompt Hold 3 seconds voice prompts enable auto answer Auto-answering about 6s Mesh Button Power on Power off Charging/Headset Type-C Port 2Basic Function Battery below 50%
Power is lower than 50% Charge Voice prompts Battery below 10%
Voice prompts Power is lower than 10% Power off
(Please use the DC 5V adapter to charge. It will flash RED light while charging and turn BLUE when fully charged.) Hold 2 seconds voice prompts Power on Blue Light Flashes Factory Reset Hold 3 seconds voice prompts Factory Reset Red and blue lights Flash Hold 2 seconds voice prompts Power off"
Red Light Goes out
(After factory reset, power off and restart the device. The power button will f lash red a nd blue alternately. At this point, you can directly connect the dev ice to your phone via Bluetooth without entering pairing mode again; ) 1.To ensure the sound quality and normal audio output, please plug the speaker wire into the TYPE-C jack all the way till there is a click to ne. 2.Due to the wzaterproof finish for the charging connector, the Type-C Jack will be much longer, so please use our TYPE-C cable for charging. Hold 4 seconds Red and blue lights flash, voice promptspairing, Phone bluetooth connects X10 voice prompts connected Blue light blinks The X10 unit can simultaneously connect two phones Disable Auto- answering call Answer call Tap x1 End call Tap x1 Reject call Hold 1s coming call on the phone coming call Answer Hold 3 seconds voice prompts disable auto answer Shut down End Reject The factory default setting is No auto answering Activate Voice Call (Siri/Google Assistant) Tap x2 Speak out the name on your phone list to call or other commands. 6Universal Pairing 5Music Function Volume Modulation 4Mesh Intercom Function Turn off Mesh Intercom 2-Way Bluetooth Intercom (Power on Status) Music Play/Pause Mesh Intercom Function (Power on Status) Ins @xgpmoto The blue light flash on X10, voice prompts device is connected Hold 3s (other brand enter pairing mode on its way) The red and blue lights flash, voice prompts searching The blue light flash slowly on X10 2-Way Bluetooth Intercom Start a talk:
Tap x1 together End a talk:
Tap x1 together To connect with XGP other styles intercom, just enter the pairing mode together when the red and blue light flash on both units, wait till the blue light slowly flashes then you can talk back and forth. Tap x1 Tap x1 Music Switch Tap x1 Tap x1 music stops music playing Play Pause music playing Last song music playing Next song Rotate clockwise music playing Turn up Rotate counterclockwise music playing Turn down 1.Theres a tone du while adjusting vo lume. When the volume is at themaximum the tone turns t o di, and at the minimum it turns to du 2. The X10 has Audio Multitasking feature. So when have a intercom talk and music playing simultaneously, rotate the Jog Dial directly to adjust the music volume, and pause the music playing then rotate the Jog Dial to adjust the intercom volume. Tap x1 on each intercom The green light flash quickly, voice prompts intercom mesh on, Exit Mesh Intercom After 5s the Solid green light is On, voice promptsN mesh devices connected Tap x1 Recover Mesh Intercom The green light flashes every 2s Tap x1 The solid green light ON Tap x2 voice prompts Intercom mesh off The green light is Off 1. The XGP X10 can support up to 10 people to have a mesh intercom talk. The Npresents numbers 1 to 10. 2. Anyone who want to exit the mesh intercom, just click the "M" button, at this time others can still keep connected and talk; if he wanna re-enter the mesh intercom talk, click the M button again to join in. 3. If someone beyond the range and disconnect from the mesh intercom talk, it will automatically reconnected if he come back to the mesh group t alk within 5 minutes, or have to click the "M" button again to re-join in. FCC& ISED Statement This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s).Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. Cet appareil est conforme la partie 15 des rgles de la FCC et aux normes RSS exemptes de licence dIndustrie Canada. Le fonctionnement est soumis aux deux conditions suivantes :(1)cet appareil ne doit pas causer dinterfrences nuisibles, et (2)cet appareil doit accepter toute interfrence reue, y compris les interferences pouvant entraner un fonctionnement inds Changes or modifications to this unit not expressly approved by the party responsible forcompliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance withthe instructions, may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turningthe equipment off and on, the user is encouraged to try to correct the interference by one ormore of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance. cet appareil est conforme l'exemption des limites d'valuation courante dans la section 2.5 du cnr - 102 et conformit avec rss 102 de l'exposition aux rf, les utilisateurs peuvent obtenir des donnes canadiennes sur l'exposition aux champs rf et la conformit. This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. Cet quipement est conforme aux limites d'exposition aux rayonnements du Canada tablies pour un environnement non contrl. Radiation Exposure Statement for camera This equipment should be installed and operated with minimum distance 0cm between the radiator & your body. Cet quipement doit tre install et utilis une distance minimale de 0 cm entre le radiateur et votre corps.