FCC ID: 2AJAC-CORE1 Digital Transmission Radio

Regulatory Compliance & Safety Information for Model C4-CORE1 Electrical Safety Advisory Scurit lectrique consultatif Important Safety Instructions Consignes de scurit importantes Read the safety instructions before using this product. Lisez les consignes de scurit avant d'utiliser ce produit. 1. Read these instructions. Lisez ces instructions. 2. Keep these instructions. Conservez ces instructions. 3. Heed all warnings. Respectez tous les avertissements. 4. Follow all instructions. Suivez toutes les instructions. 5. Do not use this apparatus near water. Ne pas utiliser cet appareil prs de l'eau. 6. Clean only with dry cloth. Nettoyez-le uniquement avec un chiffon sec. 7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. Ne pas bloquer les ouvertures de ventilation. Installer conformment aux instructions du fabricant. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Ne pas installer prs de sources de chaleur telles que des radiateurs, registres de chaleur, poles, ou autres appareils (incluant les amplificateurs) qui produisent de la chaleur. 9. Only use attachments/accessories specified by the manufacturer. Utilisez uniquement des fixations / accessoires spcifis par le fabricant. 10. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Utilisez uniquement avec le chariot, le socle, le trpied, le support ou la table spcifis par le fabricant ou vendu avec l'appareil. Lorsque vous utilisez un chariot, soyez prudent lorsque vous dplacez l'ensemble chariot / appareil pour viter des blessures dues au renversement. 1800 Continental Blvd. Suite 200-300 Charlotte, NC 28273 866-424-4489 snapone.com 11. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Confiez toutes les rparations un personnel qualifi. Une rparation est ncessaire lorsque l'appareil a t endommag de quelque faon que ce soit le cordon d'alimentation ou la fiche est endommag, du liquide a t renvers ou si des objets sont tombs dans l'appareil, l'appareil a t expos la pluie ou l'humidit, ne fonctionne pas normalement, ou s'il est tomb. 12. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Protgez le cordon d'alimentation ne soit pitin ou pinc, en particulier au niveau des fiches, des prises et au point o il sort de l'appareil. 13. This equipment uses AC power which can be subjected to electrical surges, typically lightning transients which are very destructive to customer terminal equipment connected to AC power sources. The warranty for this equipment does not cover damage caused by electrical surge or lightning transients. To reduce the risk of this equipment becoming damaged it is suggested that the customer consider installing a surge arrestor. Unplug this apparatus during lightning storms or when unused for long periods of time. Cet quipement utilise la puissance AC qui peuvent tre soumis des surtensions lectriques, la foudre gnralement transitoires qui sont trs destructives envers les quipements terminaux connects des sources d'alimentation CA. La garantie de cet appareil ne couvre pas les dommages causs par les surtensions lectriques ou transitoires de foudre. Pour rduire le risque de cet quipement devient endommag, il est suggr que le client envisager l'installation d'un limiteur de surtension. Dbranchez cet appareil pendant les orages ou lorsqu'il n'est pas utilis pendant de longues priodes de temps. 14. To completely disconnect unit power from the AC mains, remove the power cord from the appliance coupler and/or turn off the circuit breaker. To reconnect power, turn on the circuit breaker following all safety instructions and guidelines. The circuit breaker shall remain readily accessible. Pour dbrancher compltement l'alimentation secteur du rseau secteur, retirez le cordon d'alimentation du coupleur de l'appareil et / ou teignez le disjoncteur. Pour reconnecter l'alimentation, allumez le disjoncteur en suivant toutes les consignes et consignes de scurit. Le disjoncteur doit tre facilement accessible. 15. This product relies on the buildings installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than: 20A. Ce produit repose sur l'installation des btiments pour les courts-circuits (surintensit) de protection. Assurez-vous que le dispositif de protection est assigne ne dpassant pas:

20A. 16. WARNING Power Sources, Grounding, Polarization 1800 Continental Blvd. Suite 200-300 Charlotte, NC 28273 866-424-4489 snapone.com This product requires a properly grounded outlet for safety. This plug is designed to be inserted into a NEMA 5-15 (three-prong grounded) outlet only. Do not force the plug into an outlet that is not designed to accept it. Never dismantle the plug or alter the power cord, and do not attempt to defeat the grounding feature by using a 3-to-2 prong adapter. If you have a question about grounding, consult your local power company or qualified electrician. If a rooftop device such as a satellite dish connect to the product, ensure that the devices wires are also properly grounded. The bonding point can be used to provide a common ground to other equipment. This bonding point can accommodate minimum 12 AWG wire and should be connected using the required hardware specified by the other bonding point. Please use termination for your equipment in accordance with the applicable local agency requirements. AVERTISSEMENT - Sources d'alimentation, mise la terre, polarisation Ce produit ncessite une prise correctement mise la terre pour des raisons de scurit. Cette fiche est conue pour tre insre dans une prise NEMA 5-15 (trois broches mise la terre) uniquement. Ne forcez pas la fiche dans une prise qui n'est pas conue pour l'accepter. Ne dmontez jamais la fiche ou ne modifiez pas le cordon d'alimentation, et n'essayez pas de dsactiver la fonction de mise la terre en utilisant un adaptateur 3 2 broches. Si vous avez une question sur la mise la terre, consultez votre compagnie d'lectricit locale ou un lectricien qualifi. Si un appareil sur le toit tel qu'une antenne parabolique se connecte au produit, assurez-

vous que les fils des appareils sont galement correctement mis la terre. Le point de liaison peut tre utilis pour fournir une masse commune d'autres quipements. Ce point de connexion peut accueillir un fil de 12 AWG minimum et doit tre connect l'aide du matriel requis spcifi par l'autre point de connexion. Veuillez utiliser une terminaison pour votre quipement conformment aux exigences des agences locales applicables. 17. Notice For indoor use only, Internal components are not sealed from the environment. The device can only be used in a fixed location such as a telecommunication center, or a dedicated computer room. When you install the device, ensure that the protective earthing connection of the socket-outlet is verified by a skilled person. Suitable for installation in information technology rooms in accordance with Article 645 of the National Electrical Code and NFP 75. Avis Pour une utilisation en intrieur uniquement, les composants internes ne sont pas scells de l'environnement. L'appareil ne peut tre utilis que dans un lieu fixe tel qu'un centre de tlcommunication, ou une salle informatique ddie. Lors de l'installation de l'appareil, assurez-vous que la mise la terre de protection de la prise de courant est vrifie par une personne qualifie. Convient pour une installation dans des salles informatiques conformment l'article 645 du Code national de l'lectricit et NFP 75. 18. This product can interfere with electrical equipment such as tape recorders, TV sets, radios, computers, and microwave ovens if placed in close proximity. Ce produit peut interfrer avec des appareils lectriques tels que les magntophones, tlviseurs, radios, ordinateurs et fours micro-ondes si placs proximit. 19. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. N'introduisez jamais d'objets d'aucune sorte dans ce produit travers les fentes du botier car ils pourraient toucher des points de tension dangereux ou court-circuiter des pices qui pourraient entraner un incendie ou un choc lectrique. 1800 Continental Blvd. Suite 200-300 Charlotte, NC 28273 866-424-4489 snapone.com 20. WARNING No user serviceable parts inside. If the product is not operating properly, do not remove any part of the unit (cover, etc.) for repair. Unplug the unit and consult the warranty section of the owners manual. AVERTISSEMENT Aucune pice rparable par l'utilisateur l'intrieur. Si le produit ne fonctionne pas correctement, ne retirez aucune pice de l'appareil (couvercle, etc.) pour rparation. Dbranchez l'appareil et consultez la section de garantie du manuel du propritaire. 21. CAUTION: As with all batteries, there is a risk of explosion or personal injury if the battery is replaced by an incorrect type. Dispose of used battery according to the instructions of the battery manufacturer and applicable environmental guidelines. Do not open, puncture or incinerate the battery, or expose it to conducting materials, moisture, liquid, fire or heat above 54 C or 130 F. ATTENTION: Comme avec toutes les batteries, il ya un risque d'explosion ou de blessure si la batterie est remplace par un type incorrect. liminez les batteries usages selon les instructions du fabricant de la batterie et applicables des directives environnementales. Ne pas ouvrir, percer ou incinrer la batterie, ou de l'exposer des matriaux conducteurs, de l'humidit, du liquide, un incendie ou une temprature suprieure 54 C ou 130 F. 22. PoE considered a Network Environment 0 per IEC TR62101, and thus the interconnected ITE circuits may be considered ES1. The installation instructions clearly state that the ITE is to be connected only to PoE networks without routing to the outside plant. PoE considr comme un environnement de rseau 0 selon IEC TR62101 et, par consquent, les circuits ITE interconnects peuvent tre considrs comme ES1. Les instructions d'installation indiquent clairement que l'ITE doit tre connect uniquement aux rseaux PoE sans acheminement vers l'installation externe. 23. CAUTION: The Optical Transceiver used with this product should use UL listed, and Rated Laser Class I, 3.3 Vdc. ATTENTION: L'metteur-rcepteur optique utilis avec ce produit doit utiliser la liste UL et la classe de laser nominale I, 3,3 Vcc. The lightning flash and arrow head within the triangle is a warning sign alerting you of dangerous voltage inside the product L'clair et la flche dans le triangle est un signe d'alerte pour vous avertir d'une tension dangereuse l'intrieur du produit Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. Attention: Pour rduire le risque de choc lectrique, ne pas retirer le couvercle

(ou l'arrire). Aucune pice rparable par l'utilisateur. Confiez l'entretien un personnel qualifi. The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product. Le point d'exclamation dans un triangle est un signe d'avertissement vous signale des instructions importantes accompagnant le produit. See marking on bottom / back of product Voir le marquage sur les bas / dos du produit Warning!: To reduce the risk of electrical shock, do not expose this apparatus to rain or moisture 1800 Continental Blvd. Suite 200-300 Charlotte, NC 28273 866-424-4489 snapone.com AVERTISSEMENT! Pour rduire le risque de choc lectrique, n'exposez pas cet appareil la pluie ou l'humidit. Save these instructions Conservez ces instructions Compliance of this equipment is confirmed by the following label that is placed on the equipment:

Conformit de cet appareil est confirm par le symbole suivant qui est plac sur l'quipement:

USA & Canada Compliance FCC Part 15, Subpart B & IC Unintentional Emissions Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver Increase the separation between the equipment and receiver. is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareil est conforme la section 15 des rgles. Son utilisation est soumise aux deux conditions suivantes: (1) Cet appareil ne doit pas causer dinterfrences nuisibles et (2) cet appareil doit accepter toutes les interfrences reues, y compris celles pouvant entraner un fonctionnement non souhait. IMPORTANT! Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. IMPORTANT! Tous les changements ou modifications pas expressment approuvs par la partie responsable de la conformit ont pu vider lautorit de lutilisateur pour actionner cet quipement. 1800 Continental Blvd. Suite 200-300 Charlotte, NC 28273 866-424-4489 snapone.com Innovation Science and Economic Development (ISED) Unintentional Emissions Interference Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference

(2) This device must accept any interference, including interference that may cause undesired operation of the device Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) Lappareil ne doit pas produire de brouillage;

(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. FCC Part 15, Subpart C / RSS-247 Intentional Emissions Interference Statement Compliance of this equipment is confirmed by the following certification numbers that are placed on the equipment:

Notice: The term FCC ID: and IC: before the certification number signifies that FCC and Industry Canada technical specifications were met. FCC ID: 2AJAC-CORE1 IC: 7848A-CORE1 This equipment must be installed by qualified professionals or contractors in accordance with FCC Part 15.203 & IC RSS-247, Antenna Requirements. Do not use any antenna other than the one provided with the unit. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Caution :

(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

(ii) the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; and

(iii) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Avertissement:

(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;

1800 Continental Blvd. Suite 200-300 Charlotte, NC 28273 866-424-4489 snapone.com

(ii) le gain maximal d'antenne permis (pour les dispositifs utilisant la bande de 5725 5 850 MHz) doit tre conforme la limite de la p.i.r.e. spcifie pour l'exploitation point point et lexploitation non point point, selon le cas;

(iii) De plus, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) pour les bandes 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. FCC Partie 15, sous-partie C / RSS-247 Dclaration volontaire des missions interfrences Conformit de cet appareil est confirm par les chiffres de certification suivants qui sont placs sur l'quipement:

Avis: Le terme FCC ID:" et "IC:" devant le numro de certification signifie que les spcifications techniques de la FCC et d'Industrie Canada ont t respectes. FCC ID: 2AJAC-CORE1 IC: 7848A-CORE1 Cet quipement doit tre install par des professionnels qualifis ou entrepreneurs conformment aux normes FCC partie 15.203 & IC RSS-247, Exigences d'antenne. Ne pas utiliser une antenne autre que celui fourni avec l'appareil. Cet metteur ne doit pas tre localis ou fonctionner avec d'autres antennes ou transmetteurs. Les oprations dans la bande 5.15-5.25GHz sont limites l'utilisation l'intrieur seulement. RF Radiation Exposure Statement This equipment complies with FCC RF and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 10 centimeters between the radiator and your body or nearby persons. Dclaration d'exposition aux radiations RF Cet quipement est conforme aux limites d'exposition aux rayonnements RF et IC de la FCC dfinies pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 10 centimtres entre le radiateur et votre corps ou des personnes proches. Europe Compliance Compliance of this equipment is confirmed by the following logo that is placed on the product ID label that is placed on the bottom of the equipment. The full text of the EU Declaration of Conformity (DoC) is available on the regulatory webpage:

This product can be put into service in all of the EU member states, European Free Trade Association

(EFTA) and EU candidate countries without any restriction. 1800 Continental Blvd. Suite 200-300 Charlotte, NC 28273 866-424-4489 snapone.com CZ BG BE IE EE DE HR FR ES CY LT LV HU MT NL RO PT PL SE FI SK NO LI IS RS MK AL DK EL IT LU AT SI UK CH TR The frequency and maximum transmitted power in EU are listed as below:

2412 - 2472 MHz: ?$ dBm 5180 - 5240 MHz: ?$ dBm WLAN 5GHz:

Operations in the 5.15-5.35GHz band are restricted to indoor usage only. United Kingdom (UK) Compliance Compliance of this equipment is confirmed by the following logo that is placed on the product ID label that is placed on the bottom of the equipment. The full text of the UK Declaration of Conformity (DoC) is available on the regulatory webpage:

Snap One understands that a commitment to the environment is essential for a health life and sustainable growth for future generations. We are committed to supporting the environmental standards, laws, and directives that have been put in place by various communities and countries that deal with concerns for the environment. This commitment is represented by combining technological innovation with sound environmental business decisions. Recycling WEEE Compliance Snap One is committed to meeting all requirements of the Waste Electrical and Electronic Equipment (WEEE) directive (2012/19/EC). The WEEE directive requires the manufacturers of electrical and electronic equipment who sell in EU countries: (1) label their equipment to notify customers that it needs to be recycled, and (2) provide a way for their products to be appropriately disposed of or recycled at the end of their product lifespan. For collection or recycling of Snap One products, please contact your local Snap One representative or dealer. 1800 Continental Blvd. Suite 200-300 Charlotte, NC 28273 866-424-4489 snapone.com Australia & New Zealand Compliance Compliance of this equipment is confirmed by the following logo that is placed on the product ID label that is placed on the bottom of the equipment. About this Document Copyright 2022 Snap One All rights reserved. 1800 Continental Blvd. Suite 200-300 Charlotte, NC 28273 866-424-4489 snapone.com

Control4 CORE-1 Controller Installation Guide Supported models C4-CORE1 Control4 Core-1 Hub & Controller Introduction Designed for an exceptional family room entertainment experience, the Control4 CORE-1 Controller does more than automate the gear around your TV; it is the ideal smart home starter system with entertainment built in. The CORE-1 delivers a beautiful, intuitive, and responsive on-screen user interface with the ability to create and enhance the entertainment experience for any TV in the house. The CORE-1 can orchestrate a wide range of entertainment devices including Blu-ray players, satellite or cable boxes, game consoles, TVs, and virtually any product with infrared (IR) or serial (RS-232) control. It also features IP control for Apple TV, Roku, televisions, AVRs, or other network-connected devices, as well as secure wireless ZigBee control for lights, thermostats, smart locks, and more. For entertainment, the CORE-1 also includes a built-in music server that allows you to listen to your own music library, stream from a variety of leading music services, or from your AirPlay-enabled devices using Control4 ShairBridge technology. The following items are included in the CORE-1 controller box:

Box contents CORE-1 controller AC power cord IR emitters (4) External antennas (1) Accessories available for purchase CORE-1 Wall-Mount Bracket (C4-CORE1-WM) Rack Mount Kit (C4-CORE1-RMK) Control4 3-Meter Wireless Antenna Kit (C4-AK-3M) Control4 Dual-Band WiFi USB Adapter (C4-USBWIFI OR C4-USBWIFI-1) Control4 3.5 mm to DB9 Serial Cable (C4-CBL3.5-DB9B) Requirements and specifications Note: We recommend using Ethernet instead of WiFi for the best network connectivity. Note: The Ethernet or WiFi network should be installed before starting the CORE-1 controller installation. Note: The CORE-1 requires OS 3.3 or newer. Composer Pro software is required to configure this device. See the Composer Pro User Guide (ctrl4.co/cpro-ug) for details. Warnings Front view Caution! To reduce the risk of electrical shock, do not expose this apparatus to rain or moisture. AVERTISSEMENT ! Pour rduire le risque de choc lectrique, nexposez pas cet appareil la pluie ou lhumidit. Caution! In an over-current condition on USB, the software disables the output. If the attached USB device does not appear to power on, remove the USB device from the controller. AVERTISSEMENT ! Dans une condition de surintensit sur USB ou sortie de contact le logiciel dsactive sortie. Si le priphrique USB ou le capteur de contact connect ne semble pas sallumer, retirez le priphrique du contrleur. Inputs / Outputs 1 video out1 HDMI HDMI 2.0a; 3840x2160 @ 60Hz; HDCP 2.2 and HDCP 1.4 1 audio out1 HDMI or digital audio Back view Audio playback formats AAC, AIFF, ALAC, FLAC, M4A, MP2, MP3, MP4/M4A, Ogg Vorbis, PCM, WAV, WMA High-resolution audio playback Up to 192 kHz / 24 bit Network 10/100/1000BaseT compatible (required for controller setup) Specifications Video out Video Audio out Ethernet Wi-FI ZigBee Pro ZigBee antenna USB port IR out IR capture Serial out Power requirements Power consumption Available with USB Wi-Fi adapter 802.15.4 External reverse SMA connector 1 USB 3.0 port500mA Control 4 IR out5V 27mA max output 1 IR receiverfront, 20-60 KHz 2 serial out (shared with IR out 1 and 2) 100-240 VAC, 60/50Hz Max: 18W, 61 BTUs/hour Idle: 9W, 30 BTUs/hour Power Other Operating temperature 32F 104F (0C 40C) Storage temperature 4F 158F (-20C 70C) Dimensions (H W D) 1.16 7.67 5.2" (29.5 195 132 mm) Weight Shipping weight 1.5 lb (0.68 kg) 2.3 lb (1.04 kg) Additional resources The following resources are available for more support. Control4 CORE series help and information: ctrl4.co/core Snap One Tech Community and Knowledgebase: tech.control4.com Control4 Technical Support Control4 website: www.control4.com A CB D E A Activity LEDThe Activity LED shows when the controller is streaming audio. B C Caution LEDThis LED shows solid red, then blinks blue during the boot process. IR windowIR receiver for learning IR codes. Note: The Caution LED blinks orange during the factory restore process. See Reset to factory settings in this document. D Link LEDThe LED indicates that the controller has been identified in a Control4 Composer project and is communicating with Director. E Power LEDThe blue LED indicates that AC power is present. The controller turns on immediately after power is applied to it. A B C D E F G H I A Power portAC power connector for an IEC 60320-C5 power cord. B SERIAL and IR OUT3.5 mm jacks for up to four IR emitters or for acombination of IR emitters and serial devices. Ports 1 and 2 can be configured independently for serial control (for controlling receivers or disc changers) or for IR control. See Connecting the IR ports/serial ports in this document for more information. C USBOne port for an external USB drive (such as a USB stick formatted FAT32). See Setting up external storage devices in this document. D DIGITAL AUDIOOutputs audio (AUDIO OUT) shared from other Control4 devices or from digital audio sources (local media or digital streaming services). E HDMI OUTAn HDMI port to display navigation menus. Also an audio out over HDMI. F ID button and RESETID button is pressed to identify the device in Composer Pro. The ID button on the CORE-1 is also an LED that displays feedback useful in a factory restore. The RESET pinhole is used to reset or factory restore the controller. G ENET OUTRJ-45 jack for Ethernet out connection. Acts as a 2-port network switch with ENET/POE+ IN jack. H ENET/POE+ INRJ-45 jack for a 10/100/1000BaseT Ethernet connection. Also can power the controller with PoE+. I ZIGBEEAntenna for the ZigBee radio. Installation instructions To install the controller:

1 Ensure that the home network is in place before starting system setup. An Ethernet connection to the local network is required for setup. The controller requires a network connection to use all of the features as designed. After initial configuration, Ethernet (recommended) or Wi-Fi (with an optional adapter) can be used to connect the controller to web-based media databases, communicate with other IP devices in the home, and access Control4 system updates. 2 Mount the controller near the local devices you need to control. The controller can be hidden behind a TV, mounted on a wall, placed in a rack, or stacked on a shelf. The CORE-1 Wall-Mount Bracket is sold separately and designed for easy installation of the CORE-1 controller behind a TV or on the wall. 3 Attach antennas to the ZIGBEE antenna connectors. 4 Connect the controller to the network. EthernetTo connect using an Ethernet connection, connect the network cable into the controllers RJ-45 port (labeled Ethernet) and into the network port on the wall or at the network switch. Wi-FiTo connect using Wi-Fi, first connect the unit to Ethernet, connect the Wi-Fi adapter to the USB port, and then use Composer Pro System Manager to reconfigure the unit for WiFi. 5 Connect system devices. Attach IR and serial devices as described in Connecting the IR ports/serial ports and Setting up IR emitters. 6 Set up any external storage devices as described in Setting up external storage devices in this document. into an electrical outlet. 7 If using AC power, connect the power cord to the controllers power port and then Connecting the IR ports/serial ports (optional) The controller provides four IR ports, and ports 1 and 2 can be reconfigured independently for serial communication. If not used for serial, they can be used for IR. Connect a serial device to the controller using the Control4 3.5 mm-to-DB9 Serial Cable

(C4-CBL3.5-DB9B, sold separately). 1 The serial ports support baud rates between 1200 to 115200 baud for odd and even parity. The serial ports do not support hardware flow control. 2 See Knowledgebase article #268 (dealer.control4.com/dealer/knowledgebase/

article/268) for pinout diagrams. 3 To configure a port for serial or IR, make the appropriate connections in your project using Composer Pro. See the Composer Pro User Guide for details. Note: The serial ports can be configured as straight-through or null with Composer Pro. Serial ports by default are configured straight-through and can be changed in Composer by selecting Enable Null-Modem Serial Port (1 or 2). Setting up IR emitters Your system may contain third-party products that are controlled through IR commands. 1 Connect one of the included IR emitters to an IR OUT port on the controller. 2 Place the stick-on emitter end onto the IR receiver on the Blu-ray player, TV, or other target device to drive IR signals from the controller to the targets. Setting up external storage devices (optional) You can store and access media from an external storage device, for example, a network hard drive or USB memory device, by connecting the USB drive to the USB port and configuring or scanning the media in Composer Pro. Note: We support only externally powered USB drives or solid state USB sticks. Self-powered USB drives are not supported. Note: When using USB storage devices on an CORE-1 controller, you can use only one partition with a 2 TB maximum size. This limitation also applies to the USB storage on other controllers. Composer Pro driver information Use Auto Discovery and SDDP to add the driver to the Composer project. See the Composer Pro User Guide (ctrl4.co/cpro-ug) for details. OvrC setup and configuration OvrC gives you remote device management, real-time notifications, and intuitive customer management, right from your computer or mobile device. Setup is plug-and-play, with no port forwarding or DDNS address required. To add this device to your OvrC account:

1 Connect CORE-1 controller to the Internet. 2 Navigate to OvrC (www.ovrc.com) and log in to your account. 3 Add the device (MAC address and Service Tag numbers needed for authentication). More help For the latest version of this document and to view additional materials, open the URL below or scan the QR code on a device that can view PDFs. MOST RECENT VERSION MORE INFO ON CORE CONTROLLERS 2 Press and hold the RESET button. The controller resets and the ID button changes ctrl4.co/core1-ig ctrl4.co/core Legal, Warranty, and Regulatory/Safety information Visit snapone.com/legal for details. Troubleshooting Reset to factory settings Caution! The factory restore process will remove the Composer project. To restore the controller to the factory default image:

1 Insert one end of a paper clip into the small hole on the back of the controller labeled RESET. to solid red. 3 Hold the button until the ID flashes double orange. This should take five to seven seconds. The ID button flashes orange while the factory restore is running. When complete, the ID button turns off and the device power cycles one more time to complete the factory restore process. Note: During the reset process, the ID button provides the same feedback as the Caution LED on the front of the controller. Power cycle the controller 1 Press and hold the ID button for five seconds. The controller turns off and back on. Reset the network settings To reset the controller network settings to the default:

1 Disconnect power to the controller. 2 While pressing and holding the ID button on the back of the controller, power on the controller. 3 Hold the ID button until ID button turns solid orange and the Link and Power LEDs are solid blue, and then immediately release the button. Note: IDuring the reset process, the ID button provides the same feedback as the Caution LED on the front of the controller. LED status information Caution Activity Link Power Flashing LED Solid LED Just powered on Bootloader loaded Kernel loaded Network reset check Factory restore underway Factory restore fail Connected to Director Playing audio Copyright 2021, Snap One, LLC. All rights reserved. Snap One and its respective logos are registered trademarks or trademarks of Snap One, LLC (formerly known as Wirepath Home Systems, LLC), in the United States and/or other countries. 4Store, 4Sight, Control4, Control4 My Home, SnapAV, Mockupancy, NEEO, OvrC, Wirepath, and Wirepath ONE are also registered trademarks or trademarks of Snap One, LLC. Other names and brands may be claimed as the property of their respective owners. Snap One makes no claim that the information contained herein covers all installation scenarios and contingencies, or product use risks. Information within this specification subject to change without notice. A 200-00722-A 2021-07-19 DH control4.com | 888.400.4070 Regulatory Compliance & Safety Information for Model C4-CORE1 Electrical Safety Advisory Scurit lectrique consultatif Important Safety Instructions Consignes de scurit importantes Read the safety instructions before using this product. Lisez les consignes de scurit avant d'utiliser ce produit. 1. Read these instructions. Lisez ces instructions. 2. Keep these instructions. Conservez ces instructions. 3. Heed all warnings. Respectez tous les avertissements. 4. Follow all instructions. Suivez toutes les instructions. 5. Do not use this apparatus near water. Ne pas utiliser cet appareil prs de l'eau. 6. Clean only with dry cloth. Nettoyez-le uniquement avec un chiffon sec. 7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. fabricant. Ne pas bloquer les ouvertures de ventilation. Installer conformment aux instructions du 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Ne pas installer prs de sources de chaleur telles que des radiateurs, registres de chaleur, poles, ou autres appareils (incluant les amplificateurs) qui produisent de la chaleur. 9. Only use attachments/accessories specified by the manufacturer. Utilisez uniquement des fixations / accessoires spcifis par le fabricant. 10. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Utilisez uniquement avec le chariot, le socle, le trpied, le support ou la table spcifis par le fabricant ou vendu avec l'appareil. Lorsque vous utilisez un chariot, soyez prudent lorsque vous dplacez l'ensemble chariot / appareil pour viter des blessures dues au renversement. 1800 Continental Blvd. Suite 200 Charlotte, NC 28273 866-424-4489 snapone.com 11. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Confiez toutes les rparations un personnel qualifi. Une rparation est ncessaire lorsque l'appareil a t endommag de quelque faon que ce soit le cordon d'alimentation ou la fiche est endommag, du liquide a t renvers ou si des objets sont tombs dans l'appareil, l'appareil a t expos la pluie ou l'humidit, ne fonctionne pas normalement, ou s'il est tomb. 12. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Protgez le cordon d'alimentation ne soit pitin ou pinc, en particulier au niveau des fiches, des prises et au point o il sort de l'appareil. 13. This equipment uses AC power which can be subjected to electrical surges, typically lightning transients which are very destructive to customer terminal equipment connected to AC power sources. The warranty for this equipment does not cover damage caused by electrical surge or lightning transients. To reduce the risk of this equipment becoming damaged it is suggested that the customer consider installing a surge arrestor. Unplug this apparatus during lightning storms or when unused for long periods of time. Cet quipement utilise la puissance AC qui peuvent tre soumis des surtensions lectriques, la foudre gnralement transitoires qui sont trs destructives envers les quipements terminaux connects des sources d'alimentation CA. La garantie de cet appareil ne couvre pas les dommages causs par les surtensions lectriques ou transitoires de foudre. Pour rduire le risque de cet quipement devient endommag, il est suggr que le client envisager l'installation d'un limiteur de surtension. Dbranchez cet appareil pendant les orages ou lorsqu'il n'est pas utilis pendant de longues priodes de temps. 14. To completely disconnect unit power from the AC mains, remove the power cord from the appliance coupler and/or turn off the circuit breaker. To reconnect power, turn on the circuit breaker following all safety instructions and guidelines. The circuit breaker shall remain readily accessible. Pour dbrancher compltement l'alimentation secteur du rseau secteur, retirez le cordon d'alimentation du coupleur de l'appareil et / ou teignez le disjoncteur. Pour reconnecter l'alimentation, allumez le disjoncteur en suivant toutes les consignes et consignes de scurit. Le disjoncteur doit tre facilement accessible. 15. This product relies on the buildings installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than: 20A. Ce produit repose sur l'installation des btiments pour les courts-circuits (surintensit) de protection. Assurez-vous que le dispositif de protection est assigne ne dpassant pas:

20A. 16. WARNING Power Sources, Grounding, Polarization 1800 Continental Blvd. Suite 200 Charlotte, NC 28273 866-424-4489 snapone.com This product requires a properly grounded outlet for safety. This plug is designed to be inserted into a NEMA 5-15 (three-prong grounded) outlet only. Do not force the plug into an outlet that is not designed to accept it. Never dismantle the plug or alter the power cord, and do not attempt to defeat the grounding feature by using a 3-to-2 prong adapter. If you have a question about grounding, consult your local power company or qualified electrician. If a rooftop device such as a satellite dish connect to the product, ensure that the devices wires are also properly grounded. The bonding point can be used to provide a common ground to other equipment. This bonding point can accommodate minimum 12 AWG wire and should be connected using the required hardware specified by the other bonding point. Please use termination for your equipment in accordance with the applicable local agency requirements. AVERTISSEMENT - Sources d'alimentation, mise la terre, polarisation Ce produit ncessite une prise correctement mise la terre pour des raisons de scurit. Cette fiche est conue pour tre insre dans une prise NEMA 5-15 (trois broches mise la terre) uniquement. Ne forcez pas la fiche dans une prise qui n'est pas conue pour l'accepter. Ne dmontez jamais la fiche ou ne modifiez pas le cordon d'alimentation, et n'essayez pas de dsactiver la fonction de mise la terre en utilisant un adaptateur 3 2 broches. Si vous avez une question sur la mise la terre, consultez votre compagnie d'lectricit locale ou un lectricien qualifi. Si un appareil sur le toit tel qu'une antenne parabolique se connecte au produit, assurez-

vous que les fils des appareils sont galement correctement mis la terre. Le point de liaison peut tre utilis pour fournir une masse commune d'autres quipements. Ce point de connexion peut accueillir un fil de 12 AWG minimum et doit tre connect l'aide du matriel requis spcifi par l'autre point de connexion. Veuillez utiliser une terminaison pour votre quipement conformment aux exigences des agences locales applicables. 17. Notice For indoor use only, Internal components are not sealed from the environment. The device can only be used in a fixed location such as a telecommunication center, or a dedicated computer room. When you install the device, ensure that the protective earthing connection of the socket-outlet is verified by a skilled person. Suitable for installation in information technology rooms in accordance with Article 645 of the National Electrical Code and NFP 75. Avis Pour une utilisation en intrieur uniquement, les composants internes ne sont pas scells de l'environnement. L'appareil ne peut tre utilis que dans un lieu fixe tel qu'un centre de tlcommunication, ou une salle informatique ddie. Lors de l'installation de l'appareil, assurez-vous que la mise la terre de protection de la prise de courant est vrifie par une personne qualifie. Convient pour une installation dans des salles informatiques conformment l'article 645 du Code national de l'lectricit et NFP 75. 18. This product can interfere with electrical equipment such as tape recorders, TV sets, radios, computers, and microwave ovens if placed in close proximity. Ce produit peut interfrer avec des appareils lectriques tels que les magntophones, tlviseurs, radios, ordinateurs et fours micro-ondes si placs proximit. 19. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. N'introduisez jamais d'objets d'aucune sorte dans ce produit travers les fentes du botier car ils pourraient toucher des points de tension dangereux ou court-circuiter des pices qui pourraient entraner un incendie ou un choc lectrique. 1800 Continental Blvd. Suite 200 Charlotte, NC 28273 866-424-4489 snapone.com 20. WARNING No user serviceable parts inside. If the product is not operating properly, do not remove any part of the unit (cover, etc.) for repair. Unplug the unit and consult the warranty section of the owners manual. AVERTISSEMENT Aucune pice rparable par l'utilisateur l'intrieur. Si le produit ne fonctionne pas correctement, ne retirez aucune pice de l'appareil (couvercle, etc.) pour rparation. Dbranchez l'appareil et consultez la section de garantie du manuel du propritaire. 21. CAUTION: As with all batteries, there is a risk of explosion or personal injury if the battery is replaced by an incorrect type. Dispose of used battery according to the instructions of the battery manufacturer and applicable environmental guidelines. Do not open, puncture or incinerate the battery, or expose it to conducting materials, moisture, liquid, fire or heat above 54 C or 130 F. ATTENTION: Comme avec toutes les batteries, il ya un risque d'explosion ou de blessure si la batterie est remplace par un type incorrect. liminez les batteries usages selon les instructions du fabricant de la batterie et applicables des directives environnementales. Ne pas ouvrir, percer ou incinrer la batterie, ou de l'exposer des matriaux conducteurs, de l'humidit, du liquide, un incendie ou une temprature suprieure 54 C ou 130 F. 22. PoE considered a Network Environment 0 per IEC TR62101, and thus the interconnected ITE circuits may be considered ES1. The installation instructions clearly state that the ITE is to be connected only to PoE networks without routing to the outside plant. PoE considr comme un environnement de rseau 0 selon IEC TR62101 et, par consquent, les circuits ITE interconnects peuvent tre considrs comme ES1. Les instructions d'installation indiquent clairement que l'ITE doit tre connect uniquement aux rseaux PoE sans acheminement vers l'installation externe. 23. CAUTION: The Optical Transceiver used with this product should use UL listed, and Rated Laser Class I, 3.3 Vdc. ATTENTION: L'metteur-rcepteur optique utilis avec ce produit doit utiliser la liste UL et la classe de laser nominale I, 3,3 Vcc. The lightning flash and arrow head within the triangle is a warning sign alerting you of dangerous voltage inside the product L'clair et la flche dans le triangle est un signe d'alerte pour vous avertir d'une tension dangereuse l'intrieur du produit Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. Attention: Pour rduire le risque de choc lectrique, ne pas retirer le couvercle

(ou l'arrire). Aucune pice rparable par l'utilisateur. Confiez l'entretien un personnel qualifi. The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product. Le point d'exclamation dans un triangle est un signe d'avertissement vous signale des instructions importantes accompagnant le produit. See marking on bottom / back of product Voir le marquage sur les bas / dos du produit Warning!: To reduce the risk of electrical shock, do not expose this apparatus to rain or moisture 1800 Continental Blvd. Suite 200 Charlotte, NC 28273 866-424-4489 snapone.com AVERTISSEMENT! Pour rduire le risque de choc lectrique, n'exposez pas cet appareil la pluie ou l'humidit. Save these instructions Conservez ces instructions Compliance of this equipment is confirmed by the following label that is placed on the equipment:

Conformit de cet appareil est confirm par le symbole suivant qui est plac sur l'quipement:

USA & Canada Compliance FCC Part 15, Subpart B & IC Unintentional Emissions Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver Increase the separation between the equipment and receiver. is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareil est conforme la section 15 des rgles. Son utilisation est soumise aux deux conditions suivantes: (1) Cet appareil ne doit pas causer dinterfrences nuisibles et (2) cet appareil doit accepter toutes les interfrences reues, y compris celles pouvant entraner un fonctionnement non souhait. IMPORTANT! Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. IMPORTANT! Tous les changements ou modifications pas expressment approuvs par la partie responsable de la conformit ont pu vider lautorit de lutilisateur pour actionner cet quipement. 1800 Continental Blvd. Suite 200 Charlotte, NC 28273 866-424-4489 snapone.com Innovation Science and Economic Development (ISED) Unintentional Emissions Interference Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference

(2) This device must accept any interference, including interference that may cause undesired operation of the device Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) Lappareil ne doit pas produire de brouillage;

(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. FCC Part 15, Subpart C / RSS-247 Intentional Emissions Interference Statement Compliance of this equipment is confirmed by the following certification numbers that are placed on the equipment:

Notice: The term FCC ID: and IC: before the certification number signifies that FCC and Industry Canada technical specifications were met. FCC ID: 2AJAC-CORE1 IC: 7848A-CORE1 This equipment must be installed by qualified professionals or contractors in accordance with FCC Part 15.203 & IC RSS-247, Antenna Requirements. Do not use any antenna other than the one provided with the unit. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Caution :

(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

(ii) the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; and

(iii) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Avertissement:

(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;

1800 Continental Blvd. Suite 200 Charlotte, NC 28273 866-424-4489 snapone.com

(ii) le gain maximal d'antenne permis (pour les dispositifs utilisant la bande de 5725 5 850 MHz) doit tre conforme la limite de la p.i.r.e. spcifie pour l'exploitation point point et lexploitation non point point, selon le cas;

(iii) De plus, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) pour les bandes 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. FCC Partie 15, sous-partie C / RSS-247 Dclaration volontaire des missions interfrences Conformit de cet appareil est confirm par les chiffres de certification suivants qui sont placs sur l'quipement:

Avis: Le terme FCC ID:" et "IC:" devant le numro de certification signifie que les spcifications techniques de la FCC et d'Industrie Canada ont t respectes. FCC ID: 2AJAC-CORE1 IC: 7848A-CORE1 Cet quipement doit tre install par des professionnels qualifis ou entrepreneurs conformment aux normes FCC partie 15.203 & IC RSS-247, Exigences d'antenne. Ne pas utiliser une antenne autre que celui fourni avec l'appareil. Cet metteur ne doit pas tre localis ou fonctionner avec d'autres antennes ou transmetteurs. Les oprations dans la bande 5.15-5.25GHz sont limites l'utilisation l'intrieur seulement. RF Radiation Exposure Statement This equipment complies with FCC RF and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 10 centimeters between the radiator and your body or nearby persons. Dclaration d'exposition aux radiations RF Cet quipement est conforme aux limites d'exposition aux rayonnements RF et IC de la FCC dfinies pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 10 centimtres entre le radiateur et votre corps ou des personnes proches. Europe Compliance Compliance of this equipment is confirmed by the following logo that is placed on the product ID label that is placed on the bottom of the equipment. The full text of the EU Declaration of Conformity (DoC) is available on the regulatory webpage:

This product can be put into service in all of the EU member states, European Free Trade Association

(EFTA) and EU candidate countries without any restriction. 1800 Continental Blvd. Suite 200 Charlotte, NC 28273 866-424-4489 snapone.com DK EL IT LU AT SI UK CH TR CZ BG BE IE EE DE HR FR ES CY LT LV HU MT NL RO PT PL SE FI SK NO LI IS RS MK AL The frequency and maximum transmitted power in EU are listed as below:

2412 - 2472 MHz: ?$ dBm 5180 - 5240 MHz: ?$ dBm WLAN 5GHz:

Operations in the 5.15-5.35GHz band are restricted to indoor usage only. United Kingdom (UK) Compliance Compliance of this equipment is confirmed by the following logo that is placed on the product ID label that is placed on the bottom of the equipment. The full text of the UK Declaration of Conformity (DoC) is available on the regulatory webpage:

Recycling Snap One understands that a commitment to the environment is essential for a health life and sustainable growth for future generations. We are committed to supporting the environmental standards, laws, and directives that have been put in place by various communities and countries that deal with concerns for the environment. This commitment is represented by combining technological innovation with sound environmental business decisions. WEEE Compliance Snap One is committed to meeting all requirements of the Waste Electrical and Electronic Equipment (WEEE) directive (2012/19/EC). The WEEE directive requires the manufacturers of electrical and electronic equipment who sell in EU countries: (1) label their equipment to notify customers that it needs to be recycled, and (2) provide a way for their products to be appropriately disposed of or recycled at the end of their product lifespan. For collection or recycling of Snap One products, please contact your local Snap One representative or dealer. 1800 Continental Blvd. Suite 200 Charlotte, NC 28273 866-424-4489 snapone.com Australia & New Zealand Compliance Compliance of this equipment is confirmed by the following logo that is placed on the product ID label that is placed on the bottom of the equipment. About this Document Copyright 2022 Snap One All rights reserved. 1800 Continental Blvd. Suite 200 Charlotte, NC 28273 866-424-4489 snapone.com

1 E R O C

4 C

L E D O M

E L D O M l e a s e r r o f t o n e p y t o t o r P I R E L L O R T N O C N O T A M O T U A D N A L O R T N O C o w t g n w o i l l j o f e h t o t t c e b u s s i n o i t a r e p O

. s S S R t p m e x e

e s n e c i l s D E S I d n a s e u r l C C F e h t f o 5 1 t r a p h t i w s e i l p m o c e c v e d s h T i i

, e c n e r e f r e t n i l u f m r a h e s u a c t o n y a m e c v e d s h t

) 1

s n o i t i d n o c i i i

, d e v e c e r e c n e r e f r e t n i y n a t p e c c a t s u m e c v e d s h t

) 2

d n a i i

. n o i t a r e p o d e r i s e d n u e s u a c y a m t a h t e c n e r e f r e t n i g n d u c n l i i

) B

3

B M N

) B

3

S E C I N A C 4 1

1

8 6 3 2 6

. o N 2

. 2 2 C

D T S A S C N A C o t d e i f i t r e C 1

8 6 3 2 6

. D T S L U

I S N A o t s m r o f n o C 7 4 8 1 0

0 1 2 x x x C A J A 2

D I C C F x x x

A 8 4 8 7

D I C I x x x x x

D I T I I M C r i r v u o s a p e N e u q i r t c e c o h c e d e u q s R i l

I N O T N E T T A

l e b a L D I C A M i l i e s a a M n e u q i r b a F i a s y a a M n l i e d a M

COPYRIGHT 2021 11734 S. Election Road, Suite 200 Draper, UT 84020 Phone: 801-523-3100 Fax: 801-523-3199 TITLE SIZE LABEL, PRODUCT ID W/REGULATORY LOGOS C4-CORE1 A 210-01847 PART #

REV SCALE 1:1 DO NOT SCALE 1.0 SHEET 2 OF 2

REV DESCRIPTION A PRODUCTION RELEASE DATE 01/18/22 BY JLJ 89 MODEL: C4-CORE1 MODLE/

CONTROL AND AUTOMATION CONTROLLER This device complies with part 15 of the FCC rules and ISEDs license-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3(B)/NMB-3(B) Conforms to ANSI/UL STD. 62368-1 Certified to CAN/CSA STD. C22.2 No. 62368-1-14 FCC ID: 2AJAC-CORE1 IC ID: 7848A-CORE1 65 E469829 I.T.E. Made in Singapore Fabriqu en Singpour ATTENTION: Risque de choc lectrique Ne pas ouvrir MAC ID Label 210-01847-01 R2 NOTES (UNLESS OTHERWISE SPECIFIED):

1. MATERIAL:

COLOR: WHITE SEE PART NUMBER 211-00023 FOR MATERIAL SPECIFICATION AND APPROVED MANUFACTURERS 2. PRINTING:

PRINT COLOR: PANTONE 426C BLK (BLACK) USE SHEET 2 FOR LABEL PLACEMENT REFERENCE PDF DOCUMENT IS FOR REFERENCE ONLY 3. DOCUMENT SCHEDULE:

SHEET 1: ARTWORK TOLERANCES:

(ALL DIMENSIONS ARE IN MM) 1 DECIMAL: 0.50 2 DECIMAL: 0.25 3 DECIMAL: 0.13 RAD/CHAM: 0.50 ANGLE: 1 11734 S. Election Road, Suite 200 Draper, UT 84020 Phone: 801-523-3100 Fax: 801-523-3199 PROPRIETARY AND CONFIDENTIAL TITLE COPYRIGHT 2021 SNAP ONE, LLC. ALL RIGHTS RESERVED SIZE LABEL, PRODUCT ID W/REGULATORY LOGOS C4-CORE1 -SINGAPORE-

210-01847-01 PART #

A REV A SCALE 1:1 DO NOT SCALE SHEET 1 OF 2

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for confidentiality FCC ID: 2AJAC-CORE1 Date: February 28, 2022 To whom it may concern:

Short-term confidentiality Pursuant to DA 04-1705 of the Commissions public notice, in order to comply with the marketing regulations in 47CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 20 days after issue date Internal Photographs External Photographs User's manual Test Set up photo Permanent confidentiality Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below:

Block Diagram Schematics Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Applicant Address

: Snap One, LLC

: 1800 Continental Blvd Suite 200-300 Charlotte, North Carolina 28273 USA Signature

_________________________________ Name and Job Title. E-mail Tel.

: Roger Midgley, Principle Compliance Engineer

: Roger.Midgley@SnapOne.com

: +18015233187 1800 Continental Blvd. Suite 200-300 Charlotte, NC 28273 866-424-4489 snapone.com

Date: 2022/3/1 Subject: Product Certification Representative Authorization Letter Federal Communications Commission 7435 Oakland Mills Rd Columbia MD 21046-1609 FCC ID: 2AJAC-CORE1 Product name: C4-CORE1 To whom it may concern:

Compliance Test Services Address : 623 E 100 S, Salt Lake City, UT 84102

: Zach Hallows Name Job Title : Certification Specialist e-mail

: contact@compliancetestservices.com We the undersigned, hereby authorize following person to act as our agent in the preparation of an application for equipment authorization of model C4-CORE1 to the FCC Rules and Regulations. We further certifies that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002(b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 862. This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. Applicant Address

: Snap One, LLC

: 1800 Continental Blvd., Suite 200 - 300, Charlotte NC 28273, USA Signature

Name and Job Title. E-mail Tel. _________________________________

: Roger Midgley, Principal Compliance Engineer

: Roger.Midgley@SnapOne.com

: +18015233187 1800 Continental Blvd. Suite 200-300 Charlotte, NC 28273 866-424-4489 snapone.com