FCC ID: 2AJAC-CORE5 Digital Transmission Radio

Compliance Test Services 623 E. 100 S., Salt Lake City, UT 84102 19 January 2023 Federal Communications Commission Office of Engineering & Technology 7435 Oakland Mills Rd. Columbia, MD 21046 Subject: Class II Permissive Change Equipment Certification FCC ID: 2AJAC-CORE5 Snap One LLC request FCC Class II Permissive Change Equipment Certification of the C4-

CORE5 under the FCC number listed above. The C4-CORE5 uses a Zwave transmitter operating in the 908 to 916 MHz frequency band that has a low mode of operation and a long-range mode of operation. In the initial FCC Certification, the low mode of operation was certified. This Class II Permissive Change is to certify the long-

range mode of operation which is accomplished through software only. The hardware has not changed, software is used to operate the long-range portion of the same Zwave chip. The C4-CORE5 is a controller for Contol4s home automation system. The C4-CORE5 has an Ethernet port, HDMI port, SPDIF audio output, 2 USB port, and 16 IR ports. An 802.15.4(ZigBee) transceiver and a 900 MHz Zwave transceiver which is used for communication with other devices in the system. These units are powered by 100-240 VAC, 60/50Hz or PoE+. Sincerely yours, Zach Hallows Compliance Specialist Authorized Agent

Date: January 18, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for confidentiality FCC ID: 2AJAC-CORE5 To whom it may concern:

Permanent confidentiality Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below:

Block Diagram Schematics Operational Description Parts List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Applicant Address

: Snap One, LLC

: 1800 Continental Blvd Suite 200-300 Charlotte, North Carolina 28273 USA Signature

_________________________________ Name and Job Title. E-mail Tel.

: Roger Midgley, Principal Compliance Engineer

: Roger.Midgley@SnapOne.com

: +18015233187 1800 Continental Blvd. Suite 200-300 Charlotte, NC 28273 866-424-4489 snapone.com

Date: 2022/3/2 Subject: Product Certification Representative Authorization Letter Federal Communications Commission 7435 Oakland Mills Rd Columbia MD 21046-1609 FCC ID: 2AJAC-CORE5 Product name: C4-CORE5 To whom it may concern:

Compliance Test Services Address

: 623 E 100 S, Salt Lake City, UT 84102

: Zach Hallows Name Job Title : Certification Specialist e-mail

: contact@compliancetestservices.comWebs We the undersigned, hereby authorize following person to act as our agent in the preparation of an application for equipment authorization of model C4-CORE5 to the FCC Rules and Regulations. We further certifies that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002(b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 862. This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. Applicant Address

: Snap One, LLC

: 1800 Continental Blvd., Suite 200-300, Charlotte NC 28273, USA Signature

Name and Job Title. E-mail Tel.

: Roger Midgley, Principal Compliance Engineer

: Roger.Midgley@SnapOne.com

: +18015233187 _________________________________ 1800 Continental Blvd. Suite 200-300 Charlotte, NC 28273 866-424-4489 snapone.com

Regulatory Compliance & Safety Information for Model C4-CORE5 Electrical Safety Advisory Scurit lectrique consultatif Important Safety Instructions Consignes de scurit importantes Read the safety instructions before using this product. Lisez les consignes de scurit avant d'utiliser ce produit. 1. Read these instructions. Lisez ces instructions. 2. Keep these instructions. Conservez ces instructions. 3. Heed all warnings. Respectez tous les avertissements. 4. Follow all instructions. Suivez toutes les instructions. 5. Do not use this apparatus near water. Ne pas utiliser cet appareil prs de l'eau. 6. Clean only with dry cloth. Nettoyez-le uniquement avec un chiffon sec. 7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. Ne pas bloquer les ouvertures de ventilation. Installer conformment aux instructions du fabricant. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Ne pas installer prs de sources de chaleur telles que des radiateurs, registres de chaleur, poles, ou autres appareils (incluant les amplificateurs) qui produisent de la chaleur. 9. Only use attachments/accessories specified by the manufacturer. Utilisez uniquement des fixations / accessoires spcifis par le fabricant. 10. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Utilisez uniquement avec le chariot, le socle, le trpied, le support ou la table spcifis par le fabricant ou vendu avec l'appareil. Lorsque vous utilisez un chariot, soyez prudent lorsque vous dplacez l'ensemble chariot / appareil pour viter des blessures dues au renversement. 1800 Continental Blvd. Suite 200 Charlotte, NC 28273 866-424-4489 snapone.com 11. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Confiez toutes les rparations un personnel qualifi. Une rparation est ncessaire lorsque l'appareil a t endommag de quelque faon que ce soit le cordon d'alimentation ou la fiche est endommag, du liquide a t renvers ou si des objets sont tombs dans l'appareil, l'appareil a t expos la pluie ou l'humidit, ne fonctionne pas normalement, ou s'il est tomb. 12. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Protgez le cordon d'alimentation ne soit pitin ou pinc, en particulier au niveau des fiches, des prises et au point o il sort de l'appareil. 13. This equipment uses AC power which can be subjected to electrical surges, typically lightning transients which are very destructive to customer terminal equipment connected to AC power sources. The warranty for this equipment does not cover damage caused by electrical surge or lightning transients. To reduce the risk of this equipment becoming damaged it is suggested that the customer consider installing a surge arrestor. Unplug this apparatus during lightning storms or when unused for long periods of time. Cet quipement utilise la puissance AC qui peuvent tre soumis des surtensions lectriques, la foudre gnralement transitoires qui sont trs destructives envers les quipements terminaux connects des sources d'alimentation CA. La garantie de cet appareil ne couvre pas les dommages causs par les surtensions lectriques ou transitoires de foudre. Pour rduire le risque de cet quipement devient endommag, il est suggr que le client envisager l'installation d'un limiteur de surtension. Dbranchez cet appareil pendant les orages ou lorsqu'il n'est pas utilis pendant de longues priodes de temps. 14. To completely disconnect unit power from the AC mains, remove the power cord from the appliance coupler and/or turn off the circuit breaker. To reconnect power, turn on the circuit breaker following all safety instructions and guidelines. The circuit breaker shall remain readily accessible. Pour dbrancher compltement l'alimentation secteur du rseau secteur, retirez le cordon d'alimentation du coupleur de l'appareil et / ou teignez le disjoncteur. Pour reconnecter l'alimentation, allumez le disjoncteur en suivant toutes les consignes et consignes de scurit. Le disjoncteur doit tre facilement accessible. 15. This product relies on the buildings installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than: 20A. Ce produit repose sur l'installation des btiments pour les courts-circuits (surintensit) de protection. Assurez-vous que le dispositif de protection est assigne ne dpassant pas:

20A. 16. WARNING Power Sources, Grounding, Polarization 1800 Continental Blvd. Suite 200 Charlotte, NC 28273 866-424-4489 snapone.com This product requires a properly grounded outlet for safety. This plug is designed to be inserted into a NEMA 5-15 (three-prong grounded) outlet only. Do not force the plug into an outlet that is not designed to accept it. Never dismantle the plug or alter the power cord, and do not attempt to defeat the grounding feature by using a 3-to-2 prong adapter. If you have a question about grounding, consult your local power company or qualified electrician. If a rooftop device such as a satellite dish connect to the product, ensure that the devices wires are also properly grounded. The bonding point can be used to provide a common ground to other equipment. This bonding point can accommodate minimum 12 AWG wire and should be connected using the required hardware specified by the other bonding point. Please use termination for your equipment in accordance with the applicable local agency requirements. AVERTISSEMENT - Sources d'alimentation, mise la terre, polarisation Ce produit ncessite une prise correctement mise la terre pour des raisons de scurit. Cette fiche est conue pour tre insre dans une prise NEMA 5-15 (trois broches mise la terre) uniquement. Ne forcez pas la fiche dans une prise qui n'est pas conue pour l'accepter. Ne dmontez jamais la fiche ou ne modifiez pas le cordon d'alimentation, et n'essayez pas de dsactiver la fonction de mise la terre en utilisant un adaptateur 3 2 broches. Si vous avez une question sur la mise la terre, consultez votre compagnie d'lectricit locale ou un lectricien qualifi. Si un appareil sur le toit tel qu'une antenne parabolique se connecte au produit, assurez-

vous que les fils des appareils sont galement correctement mis la terre. Le point de liaison peut tre utilis pour fournir une masse commune d'autres quipements. Ce point de connexion peut accueillir un fil de 12 AWG minimum et doit tre connect l'aide du matriel requis spcifi par l'autre point de connexion. Veuillez utiliser une terminaison pour votre quipement conformment aux exigences des agences locales applicables. 17. Notice For indoor use only, Internal components are not sealed from the environment. The device can only be used in a fixed location such as a telecommunication center, or a dedicated computer room. When you install the device, ensure that the protective earthing connection of the socket-outlet is verified by a skilled person. Suitable for installation in information technology rooms in accordance with Article 645 of the National Electrical Code and NFP 75. Avis Pour une utilisation en intrieur uniquement, les composants internes ne sont pas scells de l'environnement. L'appareil ne peut tre utilis que dans un lieu fixe tel qu'un centre de tlcommunication, ou une salle informatique ddie. Lors de l'installation de l'appareil, assurez-vous que la mise la terre de protection de la prise de courant est vrifie par une personne qualifie. Convient pour une installation dans des salles informatiques conformment l'article 645 du Code national de l'lectricit et NFP 75. 18. This product can interfere with electrical equipment such as tape recorders, TV sets, radios, computers, and microwave ovens if placed in close proximity. Ce produit peut interfrer avec des appareils lectriques tels que les magntophones, tlviseurs, radios, ordinateurs et fours micro-ondes si placs proximit. 19. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. N'introduisez jamais d'objets d'aucune sorte dans ce produit travers les fentes du botier car ils pourraient toucher des points de tension dangereux ou court-circuiter des pices qui pourraient entraner un incendie ou un choc lectrique. 1800 Continental Blvd. Suite 200 Charlotte, NC 28273 866-424-4489 snapone.com 20. WARNING No user serviceable parts inside. If the product is not operating properly, do not remove any part of the unit (cover, etc.) for repair. Unplug the unit and consult the warranty section of the owners manual. AVERTISSEMENT Aucune pice rparable par l'utilisateur l'intrieur. Si le produit ne fonctionne pas correctement, ne retirez aucune pice de l'appareil (couvercle, etc.) pour rparation. Dbranchez l'appareil et consultez la section de garantie du manuel du propritaire. 21. CAUTION: As with all batteries, there is a risk of explosion or personal injury if the battery is replaced by an incorrect type. Dispose of used battery according to the instructions of the battery manufacturer and applicable environmental guidelines. Do not open, puncture or incinerate the battery, or expose it to conducting materials, moisture, liquid, fire or heat above 54 C or 130 F. ATTENTION: Comme avec toutes les batteries, il ya un risque d'explosion ou de blessure si la batterie est remplace par un type incorrect. liminez les batteries usages selon les instructions du fabricant de la batterie et applicables des directives environnementales. Ne pas ouvrir, percer ou incinrer la batterie, ou de l'exposer des matriaux conducteurs, de l'humidit, du liquide, un incendie ou une temprature suprieure 54 C ou 130 F. 22. PoE considered a Network Environment 0 per IEC TR62101, and thus the interconnected ITE circuits may be considered ES1. The installation instructions clearly state that the ITE is to be connected only to PoE networks without routing to the outside plant. PoE considr comme un environnement de rseau 0 selon IEC TR62101 et, par consquent, les circuits ITE interconnects peuvent tre considrs comme ES1. Les instructions d'installation indiquent clairement que l'ITE doit tre connect uniquement aux rseaux PoE sans acheminement vers l'installation externe. 23. CAUTION: The Optical Transceiver used with this product should use UL listed, and Rated Laser Class I, 3.3 Vdc. ATTENTION: L'metteur-rcepteur optique utilis avec ce produit doit utiliser la liste UL et la classe de laser nominale I, 3,3 Vcc. The lightning flash and arrow head within the triangle is a warning sign alerting you of dangerous voltage inside the product L'clair et la flche dans le triangle est un signe d'alerte pour vous avertir d'une tension dangereuse l'intrieur du produit Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. Attention: Pour rduire le risque de choc lectrique, ne pas retirer le couvercle

(ou l'arrire). Aucune pice rparable par l'utilisateur. Confiez l'entretien un personnel qualifi. The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product. Le point d'exclamation dans un triangle est un signe d'avertissement vous signale des instructions importantes accompagnant le produit. See marking on bottom / back of product Voir le marquage sur les bas / dos du produit Warning!: To reduce the risk of electrical shock, do not expose this apparatus to rain or moisture 1800 Continental Blvd. Suite 200 Charlotte, NC 28273 866-424-4489 snapone.com AVERTISSEMENT! Pour rduire le risque de choc lectrique, n'exposez pas cet appareil la pluie ou l'humidit. Save these instructions Conservez ces instructions Compliance of this equipment is confirmed by the following label that is placed on the equipment:

Conformit de cet appareil est confirm par le symbole suivant qui est plac sur l'quipement:

USA & Canada Compliance FCC Part 15, Subpart B & IC Unintentional Emissions Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver Increase the separation between the equipment and receiver. is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareil est conforme la section 15 des rgles. Son utilisation est soumise aux deux conditions suivantes: (1) Cet appareil ne doit pas causer dinterfrences nuisibles et (2) cet appareil doit accepter toutes les interfrences reues, y compris celles pouvant entraner un fonctionnement non souhait. IMPORTANT! Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. IMPORTANT! Tous les changements ou modifications pas expressment approuvs par la partie responsable de la conformit ont pu vider lautorit de lutilisateur pour actionner cet quipement. 1800 Continental Blvd. Suite 200 Charlotte, NC 28273 866-424-4489 snapone.com Innovation Science and Economic Development (ISED) Unintentional Emissions Interference Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference

(2) This device must accept any interference, including interference that may cause undesired operation of the device Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) Lappareil ne doit pas produire de brouillage;

(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. FCC Part 15, Subpart C / RSS-247 Intentional Emissions Interference Statement Compliance of this equipment is confirmed by the following certification numbers that are placed on the equipment:

Notice: The term FCC ID: and IC: before the certification number signifies that FCC and Industry Canada technical specifications were met. FCC ID: 2AJAC-CORE5 IC: 7848A-CORE5 This equipment must be installed by qualified professionals or contractors in accordance with FCC Part 15.203 & IC RSS-247, Antenna Requirements. Do not use any antenna other than the one provided with the unit. FCC Partie 15, sous-partie C / RSS-247 Dclaration volontaire des missions interfrences Conformit de cet appareil est confirm par les chiffres de certification suivants qui sont placs sur l'quipement:

Avis: Le terme FCC ID:" et "IC:" devant le numro de certification signifie que les spcifications techniques de la FCC et d'Industrie Canada ont t respectes. FCC ID: 2AJAC-CORE5 IC: 7848A-CORE5 Cet quipement doit tre install par des professionnels qualifis ou entrepreneurs conformment aux normes FCC partie 15.203 & IC RSS-247, Exigences d'antenne. Ne pas utiliser une antenne autre que celui fourni avec l'appareil. Cet metteur ne doit pas tre localis ou fonctionner avec d'autres antennes ou transmetteurs. Les oprations dans la bande 5.15-5.25GHz sont limites l'utilisation l'intrieur seulement. RF Radiation Exposure Statement This equipment complies with FCC RF and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 10 centimeters between the radiator and your body or nearby persons. 1800 Continental Blvd. Suite 200 Charlotte, NC 28273 866-424-4489 snapone.com Dclaration d'exposition aux radiations RF Cet quipement est conforme aux limites d'exposition aux rayonnements RF et IC de la FCC dfinies pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 10 centimtres entre le radiateur et votre corps ou des personnes proches. Europe Compliance Compliance of this equipment is confirmed by the following logo that is placed on the product ID label that is placed on the bottom of the equipment. The full text of the EU Declaration of Conformity (DoC) is available on the regulatory webpage:

This product can be put into service in all of the EU member states, European Free Trade Association

(EFTA) and EU candidate countries without any restriction. BE BG CZ DE EE IE ES FR HR LT LV CY HU MT NL RO PT PL SE FI SK NO LI IS RS MK AL DK EL IT LU AT SI UK CH TR The frequency and maximum transmitted power in EU are listed as below:

2412 - 2472 MHz: 14.2 dBm United Kingdom (UK) Compliance Compliance of this equipment is confirmed by the following logo that is placed on the product ID label that is placed on the bottom of the equipment. The full text of the UK Declaration of Conformity (DoC) is available on the regulatory webpage:

1800 Continental Blvd. Suite 200 Charlotte, NC 28273 866-424-4489 snapone.com Recycling Snap One understands that a commitment to the environment is essential for a health life and sustainable growth for future generations. We are committed to supporting the environmental standards, laws, and directives that have been put in place by various communities and countries that deal with concerns for the environment. This commitment is represented by combining technological innovation with sound environmental business decisions. WEEE Compliance Snap One is committed to meeting all requirements of the Waste Electrical and Electronic Equipment (WEEE) directive (2012/19/EC). The WEEE directive requires the manufacturers of electrical and electronic equipment who sell in EU countries: (1) label their equipment to notify customers that it needs to be recycled, and (2) provide a way for their products to be appropriately disposed of or recycled at the end of their product lifespan. For collection or recycling of Snap One products, please contact your local Snap One representative or dealer. Australia & New Zealand Compliance Compliance of this equipment is confirmed by the following logo that is placed on the product ID label that is placed on the bottom of the equipment. About this Document Copyright 2022 Snap One All rights reserved. 1800 Continental Blvd. Suite 200 Charlotte, NC 28273 866-424-4489 snapone.com