FCC ID: 2BDUK-MODEL6 Tecdesk Model 6

2 3 4 Standard SIM Card Slot 5 6 7 8 9 10 11 12 13 14 Hearing Protection Adjust the volume to a moderate level. Continuous exposure to high volume may impair your hearing. Environmental Recycling 1. Never dispose of the phone with household waste. 2. Ask your governing authority about suitable methods of disposal which minimize the risk to the environment. The cardboard box, the plastic contained in the packaging and the pieces in the mobile phone can be recycled in accordance with the rules in force on recycling. 3. Always follow the existing rules on the subject. 4. Violators are subject to sanctions and measures established by law. The bin symbol and cross, located on the device means that when the equipment has reached the end of its useful life, it must be brought to collection centers, and that treatment must be separated from urban waste. To protect the environment, when you replace the batteries, remember to use public recycling bins specified for batteries. For more information, please visit www.tecdesk.com. 15 FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

is connected.

-Connect the equipment into an outlet on a circuit different from that to which the receiver

-Consult the dealer or an experienced radio/TV technician for help. Specific Absorption Rate (SAR) information:

This Tecdesk Model 6 meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types:

Tecdesk Model 6 (FCC ID: 2BDUK-MODEL6 ) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for worn on the body is 1.279W/kg. Body-worn Operation This device was tested for typical body-worn operations. Use only the supplied or an approved antenna. CE Maintenance 1.Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. 2.The product shall only be connected to a USB interface of USB2.0. 3.Adapter shall be installed near the equipment and shall be easily accessible. 4.EUT Operating temperature range: -10 C to 55C . 5.Adapter: The plug considered as disconnect device of adapter Power supply and ADP(rating):

Input: DC 5V 1.0A 6.The device complies with RF specifications when the device used at 5mm youre your body. 7.To prevent possible hearing damage. Do not listen at high volume levels for long periods. Declaration of Conformity Tecdesk (UK) Ltd. hereby declares that this Tecdesk Model 6 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2) and Article 10(10),This product is allowed to be used in all EU member states. tecdesk.com 16 June 2022

Smart Tecdesk Model 6 Model: Model 6 FCC ID: 2BDUK-MODEL6 Input: 5V , 1.0A (by adapter);

3.8V

, 2100mAh (by Li-ion battery pack) Tecdesk (UK) Ltd. Santok House, Unit L, Braintree Industrial Estate, Braintree Road, Ruislip, HA4 0EJ, UK Importer: XXXXXXXXXXX XXXXXXXXXXXXXX

Tecdesk (UK) Ltd. 2024-01-17 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern:

We, the undersigned, hereby authorize (Shenzhen LGT Test Service Co., Ltd.) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Signature:

Name:

Cornel Calin Title:

Head of Production Company: Tecdesk (UK) Ltd. Date: 2024-01-17

Tecdesk (UK) Ltd. 2024-01-17 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for (FCC ID: 2BDUK-MODEL6) Tecdesk (UK) Ltd. (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signature:

Cornel Calin Tecdesk (UK) Ltd. 2024.1.17 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for (FCC ID: 2BDUK-MODEL6) Tecdesk (UK) Ltd. (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, Signature:

Cornel Calin

Tecdesk (UK) Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2024-01-17 Subject; Request for Confidentiality FCC ID: 2BDUK-MODEL6 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Tune-up Procedure Part List PCB Layout SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Cornel Calin/Tecdesk (UK) Ltd. Title: Head of Production

Attestation Statements 2024-03-22 TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911(d)(7) request for (FCC ID: 2BDUK-MODEL6) Tecdesk (UK) Ltd., the undersigned, hereby authorize HOPEK CORPORATION INC to act as our designated U.S. agent for service of process, Tecdesk (UK) Ltd. accepts to maintain an agent for no less than three years after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. HOPEK CORPORATION INC accepts the responsibility to act as designated U.S. agent for service of process. Applicant Information Company name: Tecdesk (UK) Ltd. Contact Name: Cornel Calin Address: Santok House, Unit L, Braintree Industrial Estate, Braintree Road, Ruislip, HA4 0EJ, UK FRN: 0034548255 Telephone No: 86-186 8215 1582 Email: cornel@santok.cn Signature:

Cornel Calin U.S. Agent Information:

Company Name: HOPEK CORPORATION INC Address:4358 S BANNOCK ST ENGLEWOOD, CO 80110 United States FRN: 0034562900 Contact Name: Peter Davis Tel.: 561-235-6113 Email: HopekPeter@gmail.com Signed by (printed name): Peter Davis Signature: