3
-
R 2.5 MODEL NO: WB-150-IPW-1B-2 INPUT: 120VAC, 12A, 50/60Hz OUTPUT: 120VAC, 12A, 50/60Hz, 1440W (TOTAL) CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK-USE ONLY INDOORS AND IN DRY LOCATIONS. ATTENTION: UTILISER UNIQUEMENT DANS DES EMPLACEMENTS SECS. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (B)/NMB-3(B) FCC ID: 2AJAC-WB150 IC: 3616C-WB150 1 0 E474610 Engineered in the USA, Manufactured in Taiwan 10 60.5 8 7 Blank Label 6710A0483010 40 S/T:
MAC:
ST12340001AU221A DA:64:91:11:22:33 Date Code:1711 P/N:6710A0483010 4.6mm 1.5mm / 6pt 30 7pt
-
- data
- 0.2mm
- 0.2
-
-
!
6710A6863030 2019/02/14 Dona L a b e l i s s t u c k o n b o t t o m o f E U T N O T E
- Dimension : 87*60.5 mm
- Ink :
- Tolerance : -0.1 mm
- Coating: Matt
- Material : 50+ (MZS215)+
Adhesive : (24 hr) : 7.0 gf/25mm Service Temperature: -20~+120 Coating : Peel Adhesion: 0.6 kgf / 25mm Service Temperature: 110 3
-
R 2.5 MODEL NO: WB-150-IP-1B-2 INPUT: 120VAC, 12A, 50/60Hz OUTPUT: 120VAC, 12A, 50/60Hz, 1440W (TOTAL) CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK-USE ONLY INDOORS AND IN DRY LOCATIONS. ATTENTION: UTILISER UNIQUEMENT DANS DES EMPLACEMENTS SECS. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (B)/NMB-3(B) FCC ID: 2AJAC-WB150 IC: 3616C-WB150 1 0 E474610 Engineered in the USA, Manufactured in Taiwan 10 60.5 8 7 Blank Label 6710A0483010 40 S/T:
MAC:
ST12340001AU221A DA:64:91:11:22:33 Date Code:1711 P/N:6710A0483010 4.6mm 1.5mm / 6pt 30 7pt
-
- data
- 0.2mm
- 0.2
-
-
!
6710A6863020 2019/02/01 Dona L a b e l i s s t u c k o n b o t t o m o f E U T N O T E
- Dimension : 87*60.5 mm
- Ink :
- Tolerance : -0.1 mm
- Coating: Matt
- Material : 50+ (MZS215)+
Adhesive : (24 hr) : 7.0 gf/25mm Service Temperature: -20~+120 Coating : Peel Adhesion: 0.6 kgf / 25mm Service Temperature: 110