Main Accesories (find more information at Wisycom.com ) Serial Number:
Purchase Date:
MTP61 MTP61 LBC61: Multiple battery charger (4 MTP61
+ 4 batteries) + TX management + LTC CAUSBM5P: Cable from USB/A to mag-
netic connector 5pin-M, lenght=1050mm for battery charging, TX management and LTC Timecode sync LBP61: rechargeable Lithium-ion battery Model CS-BCE10, Cameron Sino Part No. CGA-S008E. 3.7V, 1050 mAh, 3.9Wh LBP61: rechargeable Lithium-ion battery Model CS-BCE10, Part No. CGA-S008E 3.7V, 1050 mAh, 3.9Wh, Cameron Sino BCL61: spring loaded belt clip BCLW61: reversible wire belt clip Conformity conformity identification is visible on the display by accessing from the Main menu the Info> STD submenus:
step 1: access submenu Info; step 2: access submenu STD. RADIO Directive 2014/53/
EU Radio Equipment Directive (RED) UK Conformity FCC-ID: POUMTP61 *
IC: 11967A-MTP61 **
IC
(*)The Wisycom microphone pocket transmitter model MTP61 complies with the following requirements: FCC (Federal Communications Commission) Part 74. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operations. Changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC ID can be found inside the battery compartment. This device complies with part 15 of the fcc rules. operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.Note: the grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
(**) EN This device complies with Industry Canada license-exempt RSS-123 and RSS-210 standard. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This radio transmitter IC: 11967A-MTP61 has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. FR Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence RSS-123 et RSS-210. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Le prsent metteur radio IC: 11967A-MTP61a t approuv par Industrie Canada pour fonctionner avec les types dantenne numrs ci-dessous et ayant un gain admissible maximal et limpdance requise pour chaque type dantenne. Les types dantenne non inclus dans cette liste, ou dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour lexploitation de lmetteur. Antenna types (50 Ohm impedance, max gain 2.1dBi): AWSS-507: band 470-547 MHz, AWSS-590: band 547-663 MHz, AWSS30-950: band 940-960 MHz. This equipment complies has been evaluated for and shown compliant with the FCC and ISED RF Exposure limits. The unit of measurement for RF exposure is Specific Absorption Rate (SAR). The FCC SAR limits for is 1.6W/Kg per 1g of tissue The maximum SAR levels tested has been shown to be 0.85 W/kg at head with 0mm of separation distance from the body. This device operates on a no-interference, no-protection basis. Should the user seek to obtain protection from other radio services operating in the same TV bands, a radio license is required. For further details, consult Innovation, Science and Economic development Canadas Client Procedures Circular CPC-2-1-
28, Voluntary Licensing of License-Exempt Wireless Microphones in TV Bands. I 1 6 P T M
R T S
3 0 q
n e
1 6 P T M This guide is intended to assist you with initial quick setup and operation of your Wisycom product. You can refer to Wisycom Autorized Distributors for technical Support and information about service and repairs available in your area or contact us directly by email. WISYCOM S.r.l. Via Tiepolo 7/E 35019 Tombolo (PD) - ITALY WISYCOM INC. 14301 Sullyfield Circle, Suite C Chantilly, VA 20151- USA
+39 0424 382605
+1 703-574-7505 support@wisycom.com sales@wisycom.com support.us@wisycom.com sales.us@wisycom.com Download Documentation and Firmware Get declarations, user manual, specifica-
tions and softwares on the download page:
wisycom.com/products/d/MTP61 Product Registration and Warranty Register your product to extend your warranty and receive update on latest firmware:
wisycom.com/registration Keep up with Wisycom online Follow us on Facebook and Instagram. You can also subscribe on Youtube for more. wisycom.com/social QUICK USER GUIDEQUICK USER GUIDE Mic Mode 2 W 2 W+B 3 W AUX Pinout 1 = GND / 3 = AF 1 = GND / 3 = AF+5,5 V 1 = GND / 2 = 5,5 V / 3 = AF 1 = GND / 3 = AF (High impedance) Frequency Group Channel Mic Input (LEMO type) Load a mic PRESET to suit your wiring or enter the Audio menu. Transmitter name Recording ON Bluetooth Audio bar Tx PWR status Battery status Panel locked RF level in mW Label 507 590 552 646 710 796 808 950 1K1 1K2 e p y t a n n e t n A Code AWSS-507 AWSS-590 AWSS-552 AWSS-646 AWSS-710 AWSS-796 AWSS-808 AWSS-950 AWSS-1K1 AWSS-1K2 Band MHz 470-547 547-663 510-595 595-698 663-760 760-832 806-810 940-960 960-1160 1240-1260 Audio LED OFF: Audio is muted GREEN: Audio is enabled RED: Audio is peaking SEL / ON Push to switch ON the device. Push together with GAIN/UP to enter the main MENU. When in menu single push to save and confirm selections. EXIT / OFF Long press to switch the unit OFF. Short press to step back in menu Press together with SEL/ON to mute/
unmute the audio. Battery compartment Press to open Antenna Connector (SSMA type). RF/Power LED OFF: MTP61 is OFF GREEN: Transmission is ON RED: Transmission is OFF RED SLOW BLINK: battery < 25%
RED FAST BLINK: battery < 12%
Gain Shortcut/Up Push to quickly access gain setup frequency menu and/or scroll up while in the menu. Recording Status Led Solid red when recording has started. Ch Shortcut/Down Short press to access channel/group/
frequency menu and/or scroll down while in the menu. Long press it with EXIT/OFF to lock the front panel. Magnetic Connector 5 pin to recharge battery, connect to Wisycom Manager, LTC Timecode sync, Download recorded files (USB High Speed).