CS61 User manual Designed and engineered in China Made in China MODEL: CS61 1. Welcome......................................... 5 2. Overview......................................... 6 3. Where To Position......................... 7 3.1 Small Meeting Room 3.2 Desk 4. How To Charge........................... 9 4.1 USB Charging 4.2 Automatic Power Off 4.3 Battery Status 5. How To Connect ............................... 11 5.1 Connect To PC (Bluetooth) 5.2 Connect To PC (USB Cable) 5.3 Connect To Smartphone 6. How To Use ....................................... 13 6.1 Button Visibility 6.2 Typical Use 6.3 The LED Light-Ring Status 6.4 Voice assistant button CS61 3 7. Software .............................................. 17 7.1 UC Manager 7.2 Update Firmware 8. Support ................................................ 19 8.1 Faq And Technical Specifications 8.2 How To Care For Your VT Device CS61 4 1. Welcome Thank you for using the CS61. We hope you will enjoy it !
CS61 features Immersive sound for calls and music Intuitive plug and play connectivity - connect to laptop, smartphone and tablet via USB or Bluetooth Integrated Busy light Light weight design, protective travel pouch, and 12 hours of battery life Flexible and scalable for small meetings Interact with your voice assistant with the one-touch voice assistant button Compatible with Avaya, Cisco Jabber and Skype for Business for a plug-and-
play experience CS61 5 Battery status Mute/ Voice assistant Volume Down Volume Up Answer Call End Call Busylight Bluetooth 2. Overview Power On/Off USB Cable Table Stand BT 100U CS61 6 3. Where to position 3.1 Small meeting room Position the speakerphone in the center of the table, up to 2m/6ft from each participant. A single CS61 is ideal for up to 6 people. 2m/6ft CS61 7 3.2 Desk When using the CS61 at your desk it is recommended to put the speakerphone into an upright position using the table stand. This will better direct the audio towards you. CS61 8 4. How to charge 4.1 USB charging Plug the CS61 into a USB power source using the attached USB cable. The CS61 battery lasts for up to 12 hours of talk time and takes approx. 3 hours to fully charge. 4.2 Automatic power off To preserve battery while unplugged, the CS61 will automatically power off when it has not been connected to a bluetooth device for 15 minutes. CS61 9 4.3 Battery status To view the current battery status, press the Battery status button. The LED on the Battery status button When the battery is full, the LED is Green, when the battery is medium, the LED is Blue, When the battery is low battery, the LED is Red, When the battery is very low battery, the Red LED is flashing. Full battery Medium battery Low battery CS61 10 5. How to connect 5.1 Connect to PC (Bluetooth) Plug the BT 100U into a USB port on your PC. The CS61 and the BT 100U are pre
-paired and ready to use out of the box. The bluetooth range is 30m. 30m/100 ft For the CS61 to work correctly you may need to set the BT 100U as the audio device in your operating systems audio settings. To manually pair the CS61 with the BT 100U, please use UC Manager. CS61 11 5.2 Connect to PC (USB cable) Plug the CS61 into a USB port on your PC. You may need to set the CS61 as the playback device in your operating systems audio settings. 5.3 Connect to smartphone Hold the Bluetooth button for 2 seconds and follow the voice-guided instructions to pair to your smartphone. The bluetooth range is 10m. 10 m/30 ft To disconnect or reconnect, Double tap the Bluetooth button again. CS61 12 6. How to use Bluetooth Battery status Mute/ Voice assistant Volume Down Volume Up Answer Call End Call Busylight 6.1 Button visibility Power On/Off The buttons are backlit and only visible when the speakerphone is powered on. After 20 second of inactivity the buttons will fade, and can be reactivated by tapping the area where the buttons are located. The Voice assistant button, and Mute button will only be visible under certain conditions (e.g. the Voice assistant button is only visible when the CS61 is connected smart phone and not on call). CS61 13 6.2 Typical use CS61 14 6.3 The LED Light-Ring Status WHAT HOW Power on or off The LED light-ring flashes Green, Blue and Red Incoming call The LED light-ring Green breathing On call The LED light-ring glow Red Mute The LED light-ring red breathing Low Battery The LED light-ring flashes Red CS61 15 6.4 Voice assistant button By default, the voice assistant button will activate your smartphones voice assistant (Siri, Google Now, Cortana,Xiaoai,Xiaoyi). When you press the voice assistant button, the button will turn Green light , and it will awaken the voice assistant. CS61 16 is PC software designed enable to optimal 7. Software 7.1 UC Manager UC Manager support, manage and functionality for VT devices. CS61 Download the latest version from vbet.cn/UCM 17 7.2 Update firmware Firmware updates improve performance or add new functionality to VT devices. 1. Connect the CS61 to a PC using the USB cable. 2. Install UC Manager on your PC. 3. Use UC Manger to check for the latest firmware updates. CS61 18 8. Support 8.1 FAQ and technical specifications View the FAQ, certifications, and technical specifications at vbet.cn/conference-speaker/
8.2 How to care for your VT device The CS61 is for indoor use only. Avoid storage at extreme temperatures
(above 65C/149F or below -40C/-40F). Do not expose the CS61 to rain or other Do not cover the CS61 with stickers liquids. or labels. CS61 19