app
s
|
Applicant Information
|
|
various
|
Effective |
2022-04-20
|
various
|
2022-01-26
|
various
|
2021-01-27
|
various
|
2020-03-11
|
various
|
2020-02-12
|
various
|
2020-01-10
|
various
|
Applicant's complete, legal business name |
HP Inc.
|
various
|
FCC Registration Number (FRN) |
0008035131
|
various
|
0025126541
|
various
|
Physical Address |
3390 East Harmony Road
|
various
|
Fort Collins, CO
|
various
|
Fort Collins
|
various
|
United States
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
K******@sporton-usa.com
|
various
|
K******@sporton-usa.com
|
various
|
c******@telefication.com
|
various
|
t******@timcoengr.com
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
B94
|
various
|
Equipment Product Code |
RTL8822CED
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
R****** P****** T******
|
various
|
Title |
US Canada Technical Regulations
|
various
|
Telephone Number |
970-8********
|
various
|
Fax Number |
000-0********
|
various
|
E-mail |
r******@hp.com
|
|
app
s
|
Technical Contact
|
various
|
Firm Name |
Sporton International Inc.
|
various
|
SGS Taiwan Ltd
|
various
|
SGS Taiwan Ltd.
|
various
|
Name |
I******** C******
|
various
|
J******** C********
|
various
|
Physical Address |
No.52, Huaya 1st Rd., Guishan Dist.
|
various
|
134, Wu Kung Road, WuKu Industrial Zone
|
various
|
Taoyuan, 333
|
various
|
Taiwan
|
various
|
Telephone Number |
886-3********
|
various
|
886 2********
|
various
|
88622******** Extension:
|
various
|
Fax Number |
886-3********
|
various
|
886 2********
|
various
|
88622********
|
various
|
E-mail |
i******@sporton.com.tw
|
various
|
j******@sgs.com
|
various
|
J******@sgs.com
|
|
app
s
|
Non Technical Contact
|
various
|
Firm Name |
SGS Taiwan Ltd
|
various
|
SGS Taiwan Ltd.
|
various
|
Name |
J******** C****
|
various
|
Physical Address |
134, Wu Kung Road, WuKu Industrial Zone
|
various
|
Taiwan
|
various
|
Telephone Number |
886 2********
|
various
|
88622******** Extension:
|
various
|
Fax Number |
886 2********
|
various
|
886 2********
|
various
|
88622********
|
various
|
E-mail |
j******@sgs.com
|
various
|
J******@sgs.com
|
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 10/17/2022 |
various | 07/25/2022 |
various | 07/11/2021 |
various | 09/07/2020 |
various | 07/15/2020 |
various | 07/08/2020 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
various | NII - Unlicensed National Information Infrastructure TX |
various | DTS - Digital Transmission System |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 802.11 a/b/g/n/ac RTL8822CE Combo module |
various | 802.11a/b/g/n/ac RTL8822CE Combo Module |
various | 802.11 a/b/g/n/ac RTL8822CE Combo Module |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
various | No |
various | Modular Equipment Type | Limited Single Modular Approval |
various | Single Modular Approval |
various | Purpose / Application is for | Class II Permissive Change |
various | Change in Identification |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook PC, Model: TPN-W147. The highest reported SAR values for body and simultaneous transmission use conditions are <0.1 W/kg and 1.24 W/kg, respectively. |
various | Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook PC, Model: TPN-W147. The highest reported SAR values for body and simultaneous transmission use conditions are 1.24 W/kg and 1.24 W/kg, respectively. |
various | Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook PC, Model: TPN-W147. The highest reported SAR values for body and simultaneous transmission use conditions are 0.82 W/kg and 0.87 W/kg, respectively. |
various | Class II Permissive Change: Enables portable use when integrated into the HP Notebook PC, Model: TPN-W155. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 1.07W/kg and 1.09 W/kg, respectively.
Power listed is the maximum combined conducted output power. Single Modular Approval
for mobile RF Exposure condition. The antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 20cm from all persons and must not be
co-located or operating in conjunction with any other antenna or transmitter, except in
accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM
installation only. OEM integrators must be provided with antenna installation instructions.
OEM integrators and end-Users must be provided with transmitter operation conditions for
satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM
integrators and the OEM integrators are instructed to ensure that the end user has no
manual instructions to remove or install the device. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
This device has 20 MHz and 40 MHz bandwidth modes. |
various | Class II Permissive Change: Enables portable use when integrated into the HP Notebook PC, Model: TPN-W155. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are < 0.10W/kg and 1.09 W/kg, respectively.
Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
various | Class II Permissive Change: Enables portable use when integrated into the HP Notebook PC, Model: TPN-W155. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.97W/kg and 0.99 W/kg, respectively.
Power listed is the maximum combined conducted output power. Single Modular Approval
for mobile RF Exposure condition. The antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 20cm from all persons and must not be
co-located or operating in conjunction with any other antenna or transmitter, except in
accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM
installation only. OEM integrators must be provided with antenna installation instructions.
OEM integrators and end-Users must be provided with transmitter operation conditions for
satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM
integrators and the OEM integrators are instructed to ensure that the end user has no
manual instructions to remove or install the device. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. |
various | Class II Permissive Change : This change is to add new Host(Brand/Model Number: HP/TPN-C153) with 4 new antennas as in the filing.
1. Type : PIFA, Mode : Tablet, Supplier : High-Tek Electronics Co., Ltd, Part Number : 0ACCN020009N(DC33002II00) (Main/Tx1) and 0ACCN020010N(DC33002II10) (Aux/Tx2)).
2. Type : PIFA, Mode : Tablet, Supplier : Wistron NeWeb Corporation, Part Number : 81EABD15.G41(DC33002IH00) (Main/Tx1) and 81EABD15.G42(DC33002IH10) (Aux/Tx2)).
3. Type : PIFA, Mode : Notebook, Supplier : High-Tek Electronics Co., Ltd, Part Number : 0ACCN020009N(DC33002II00) (Main/Tx1) and 0ACCN020010N(DC33002II10) (Aux/Tx2)).
4. Type : PIFA, Mode : Notebook, Supplier : Wistron NeWeb Corporation, Part Number : 81EABD15.G41(DC33002IH00) (Main/Tx1) and 81EABD15.G42(DC33002IH10) (Aux/Tx2)).
The host a portable device. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are 1.16W/kg, and 1.11 W/kg, respectively.
Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. |
various | Class II Permissive Change : This change is to add new Host(Brand/Model Number: HP/TPN-C153) with 4 new antennas as in the filing.
1. Type : PIFA, Mode : Tablet, Supplier : High-Tek Electronics Co., Ltd, Part Number : 0ACCN020009N(DC33002II00) (Main/Tx1) and 0ACCN020010N(DC33002II10) (Aux/Tx2)).
2. Type : PIFA, Mode : Tablet, Supplier : Wistron NeWeb Corporation, Part Number : 81EABD15.G41(DC33002IH00) (Main/Tx1) and 81EABD15.G42(DC33002IH10) (Aux/Tx2)).
3. Type : PIFA, Mode : Notebook, Supplier : High-Tek Electronics Co., Ltd, Part Number : 0ACCN020009N(DC33002II00) (Main/Tx1) and 0ACCN020010N(DC33002II10) (Aux/Tx2)).
4. Type : PIFA, Mode : Notebook, Supplier : Wistron NeWeb Corporation, Part Number : 81EABD15.G41(DC33002IH00) (Main/Tx1) and 81EABD15.G42(DC33002IH10) (Aux/Tx2)).
The host a portable device. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are <0.1 W/kg, and 1.11 W/kg, respectively.
Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
various | Class II Permissive Change : This change is to add new Host(Brand/Model Number: HP/TPN-C153) with 4 new antennas as in the filing.
1. Type : PIFA, Mode : Tablet, Supplier : High-Tek Electronics Co., Ltd, Part Number : 0ACCN020009N(DC33002II00) (Main/Tx1) and 0ACCN020010N(DC33002II10) (Aux/Tx2)).
2. Type : PIFA, Mode : Tablet, Supplier : Wistron NeWeb Corporation, Part Number : 81EABD15.G41(DC33002IH00) (Main/Tx1) and 81EABD15.G42(DC33002IH10) (Aux/Tx2)).
3. Type : PIFA, Mode : Notebook, Supplier : High-Tek Electronics Co., Ltd, Part Number : 0ACCN020009N(DC33002II00) (Main/Tx1) and 0ACCN020010N(DC33002II10) (Aux/Tx2)).
4. Type : PIFA, Mode : Notebook, Supplier : Wistron NeWeb Corporation, Part Number : 81EABD15.G41(DC33002IH00) (Main/Tx1) and 81EABD15.G42(DC33002IH10) (Aux/Tx2)).
The host a portable device. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are 0.69 W/kg, and 1.35 W/kg, respectively.
Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. |
various | Class II Permissive Change: This change is to incorporate this Module into Portable category configuration (Brand: HP, Notebook PC Model number: TPN-W143) and antenna change as described in the following. PIFA Antenna, Supplier: WNC Part number: 025.901HL.0001 (81EAA415.GH1) (Tx1 and Tx2). Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.92 W/kg and 1.48 W/kg, respectively.
Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. |
various | Class II Permissive Change: This change is to incorporate this Module into Portable category configuration (Brand: HP, Notebook PC Model number: TPN-W143) and antenna change as described in the following. PIFA Antenna, Supplier: WNC Part number: 025.901HL.0001 (81EAA415.GH1) (Tx1 and Tx2). Any configuration other than the one described will require a separate approval.
Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
various | Class II Permissive Change: This change is to incorporate this Module into Portable category configuration (Brand: HP, Notebook PC Model number: TPN-W143) and antenna change as described in the following. PIFA Antenna, Supplier: WNC Part number: 025.901HL.0001 (81EAA415.GH1) (Tx1 and Tx2). Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.38 W/kg and 1.38 W/kg, respectively.
Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. |
various | Class II Permissive Change : This change is to add new Host(Brand/Model Number: HP/TPN-C147) with 2 new antennas (Vendor: Wistron NeWeb Corp., Part Number: DC33002DM00 (81EAA415.GJR) (Main/Tx1) and DC33002DM10 (81EAA415.GJS) (Aux/Tx2)).
This is a portable device. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are <0.1 W/kg, and 1.19 W/kg, respectively.
Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
various | Class II Permissive Change : This change is to add new Host(Brand/Model Number: HP/TPN-C147) with 2 new antennas (Vendor: Wistron NeWeb Corp., Part Number: DC33002DM00 (81EAA415.GJR) (Main/Tx1) and DC33002DM10 (81EAA415.GJS) (Aux/Tx2)).
This is a portable device. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are 1.17 W/kg, and 1.19 W/kg, respectively.
Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. |
various | Class II Permissive Change : This change is to add new Host(Brand/Model Number: HP/TPN-C147) with 2 new antennas (Vendor: Wistron NeWeb Corp., Part Number: DC33002DM00 (81EAA415.GJR) (Main/Tx1) and DC33002DM10 (81EAA415.GJS) (Aux/Tx2)).
This is a portable device. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are 1.03 W/kg, and 1.01 W/kg, respectively.
Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. |
various | Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. |
various | Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. |
various | Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
SPORTON International Inc.
|
various
|
SGS Taiwan Ltd. Central RF Lab
|
various
|
Sporton International Inc.
|
various
|
SGS Taiwan Ltd.
|
various
|
Name |
A****** C******
|
various
|
R**** W******
|
various
|
R**** W****
|
various
|
Telephone Number |
+886-******** Extension:
|
various
|
+886-******** Extension:
|
various
|
88633********
|
various
|
+886-******** Extension:
|
various
|
Fax Number |
+886-********
|
various
|
+886-********
|
various
|
+886-********
|
various
|
E-mail |
a******@sporton.com.tw
|
various
|
r******@sgs.com
|
various
|
R******@sgs.com
|
|