app
s
|
Applicant Information
|
|
1 2 3 4
|
Effective |
2019-11-05
|
1 2 3 4
|
2018-07-10
|
1 2 3 4
|
2016-09-23
|
1 2 3 4
|
2016-05-05
|
1 2 3 4
|
Applicant's complete, legal business name |
Accton Technology Corp
|
1 2 3 4
|
FCC Registration Number (FRN) |
0017693334
|
1 2 3 4
|
Physical Address |
No. 1, Creation Rd. III, Science-based Industrial Park
|
1 2 3 4
|
No. 1, Creation Rd. III
|
1 2 3 4
|
Hsin Chu 30077, N/A
|
1 2 3 4
|
Taiwan
|
|
app
s
|
TCB Information
|
1 2 3 4
|
TCB Application Email Address |
t******@timcoengr.com
|
1 2 3 4
|
T******@TIMCOENGR.COM
|
1 2 3 4
|
TCB Scope |
A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
|
|
app
s
|
FCC ID
|
1 2 3 4
|
Grantee Code |
HED
|
1 2 3 4
|
Equipment Product Code |
ML60MDSB
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4
|
Name |
A******** W******
|
1 2 3 4
|
Title |
Manager
|
1 2 3 4
|
Telephone Number |
886-3******** Extension:
|
1 2 3 4
|
Fax Number |
886-3********
|
1 2 3 4
|
E-mail |
m******@accton.com
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 | No |
1 2 3 4 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter |
1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Metrolinq 60 GHz Module |
1 2 3 4 | Metrolinq 60GHz Module |
1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 4 | Modular Equipment Type | Single Modular Approval |
1 2 3 4 | Limited Single Modular Approval |
1 2 3 4 | Purpose / Application is for | Class II Permissive Change |
1 2 3 4 | Class II permissive change or modification of presently authorized equipment |
1 2 3 4 | Original Equipment |
1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | No |
1 2 3 4 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 | Grant Comments | Single Modular Approval. Power listed is conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 57 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 42 dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
Class II Permissive Change: Adds 1.08 GHz and 2.16 GHz channels via software revision. |
1 2 3 4 | Single Modular Approval. Power listed is conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 56 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 42 dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
1 2 3 4 | Single Modular Approval. Power listed is conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 26 dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
1 2 3 4 | Limited Single Modular Approval. Power listed is conducted. This module is approved for use when installed in Brand: IgniteNet / Model: ML-60-35, ML-60-35-1, ML-60-19, ML-60-19-1. Highest average EIRP with 42 dBi antenna described in the application is 38.11 W. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 56 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4
|
Firm Name |
Sporton International Inc.
|
1 2 3 4
|
SPORTON International Inc.
|
1 2 3 4
|
Name |
A******** C********
|
1 2 3 4
|
S**** J****
|
1 2 3 4
|
Telephone Number |
+886-********
|
1 2 3 4
|
886-3******** Extension:
|
1 2 3 4
|
Fax Number |
+886-********
|
1 2 3 4
|
886-3********
|
1 2 3 4
|
E-mail |
a******@sporton.com.tw
|
1 2 3 4
|
s******@sporton.com.tw
|
|