app
s
|
Applicant Information
|
|
various
|
Effective |
2023-10-19
|
various
|
2023-04-13
|
various
|
2023-02-08
|
various
|
2023-01-06
|
various
|
2022-12-20
|
various
|
2022-09-26
|
various
|
2022-08-24
|
various
|
2022-06-01
|
various
|
2022-05-19
|
various
|
2022-04-19
|
various
|
2022-03-30
|
various
|
2022-02-03
|
various
|
2022-01-25
|
various
|
2022-01-21
|
various
|
2021-12-03
|
various
|
2021-10-13
|
various
|
2021-10-11
|
various
|
2021-08-23
|
various
|
2021-07-27
|
various
|
2021-07-23
|
various
|
2021-07-14
|
various
|
2021-07-12
|
various
|
2021-06-24
|
various
|
2021-05-17
|
various
|
2021-04-23
|
various
|
2021-03-03
|
various
|
2021-02-26
|
various
|
2021-02-24
|
various
|
2021-02-23
|
various
|
2021-02-18
|
various
|
2021-02-01
|
various
|
2021-01-25
|
various
|
2020-12-21
|
various
|
2020-12-18
|
various
|
2020-12-15
|
various
|
2020-12-07
|
various
|
2020-12-04
|
various
|
2020-12-02
|
various
|
2020-11-24
|
various
|
2020-11-23
|
various
|
2020-11-20
|
various
|
2020-11-19
|
various
|
2020-11-18
|
various
|
2020-11-17
|
various
|
2020-11-16
|
various
|
2020-09-24
|
various
|
2020-09-17
|
various
|
2020-09-15
|
various
|
2020-08-27
|
various
|
2020-08-26
|
various
|
2020-08-06
|
various
|
2020-06-30
|
various
|
2020-06-18
|
various
|
2020-06-09
|
various
|
2020-06-02
|
various
|
2020-06-01
|
various
|
2020-05-29
|
various
|
2020-05-14
|
various
|
2020-05-13
|
various
|
2020-05-12
|
various
|
2020-05-06
|
various
|
2020-05-04
|
various
|
2020-04-21
|
various
|
2020-04-07
|
various
|
2020-03-26
|
various
|
2020-03-04
|
various
|
2020-03-02
|
various
|
2020-02-28
|
various
|
2020-02-06
|
various
|
2020-01-23
|
various
|
2020-01-14
|
various
|
2019-11-07
|
various
|
2019-11-06
|
various
|
2019-11-01
|
various
|
2019-10-30
|
various
|
2019-08-26
|
various
|
2019-08-16
|
various
|
2019-06-28
|
various
|
2019-06-11
|
various
|
2019-06-07
|
various
|
2018-11-20
|
various
|
Applicant's complete, legal business name |
Intel Corporation
|
various
|
FCC Registration Number (FRN) |
0033159344
|
various
|
0008035131
|
various
|
Physical Address |
425 rue de Goa Le Cargo B6
|
various
|
100 Center Point Circle Suite 200
|
various
|
425 rue de Goa
|
various
|
100 Center Point Circle
|
various
|
Antibes, N/A
|
various
|
Columbia, South Carolina 29210
|
various
|
Columbia, SC
|
various
|
Columbia
|
various
|
Columbia, 29210
|
various
|
France
|
various
|
United States
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
h******@acbcert.com
|
various
|
K******@sporton-usa.com
|
various
|
h******@ACBcert.com
|
various
|
h******@atcbcert.com
|
various
|
H******@acbcert.com
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
various
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
PD9
|
various
|
Equipment Product Code |
AX201D2
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
B****** L******
|
various
|
S****** C******** H******
|
various
|
Title |
Regulatory Engineer
|
various
|
Product Regulations Engineer
|
various
|
Telephone Number |
04930********
|
various
|
803-3********
|
various
|
Fax Number |
04930********
|
various
|
803-2********
|
various
|
E-mail |
b******@intel.com
|
various
|
s******@intel.com
|
|
app
s
|
Technical Contact
|
various
|
Firm Name |
Intel Corporation
|
various
|
Intel Mobile Communications
|
various
|
Dekra Testing
|
various
|
RF Exposure Lab
|
various
|
RF Expsoure Lab
|
various
|
Name |
B******** L********
|
various
|
S****** C******** H********
|
various
|
S****** H********
|
various
|
S**** H******
|
various
|
F****** Y****
|
various
|
J****** M****
|
various
|
j****** M******
|
various
|
s****** H********
|
various
|
Physical Address |
425 rue de Goa
|
various
|
100 Center Point Circle
|
various
|
100 Center Point Circle Suite 200
|
various
|
100 center Point Circle
|
various
|
No. 5-22 Ruishukeng, Linkou Dist.
|
various
|
No. 5-22, Ruishukeng, Linkou Dist.
|
various
|
802 N. Twin Oaks Valley Road, Suite 105
|
various
|
Antibes, 06600
|
various
|
Columbia, 29212
|
various
|
Columbia, 29210
|
various
|
Columbia, South Carolina 29210
|
various
|
New Taipei City, 24451
|
various
|
San Marcos, 92069
|
various
|
San Marcos, California 92069
|
various
|
San Marcos, Virginia 92069
|
various
|
San Marcos, South Carolina 92069
|
various
|
Columbia, Virginia 29210
|
various
|
France
|
various
|
United States
|
various
|
Taiwan
|
various
|
Telephone Number |
04930********
|
various
|
80321********
|
various
|
80331********
|
various
|
88628******** Extension:
|
various
|
76047********
|
various
|
+7604********
|
various
|
+1760********
|
various
|
+1803********
|
various
|
E-mail |
b******@intel.com
|
various
|
s******@intel.com
|
various
|
f******@dekra.com
|
various
|
i******@rfexposurelab.com
|
various
|
s******@Intel.com
|
various
|
S******@intel.com
|
|
app
s
|
Non Technical Contact
|
various
|
Firm Name |
Intel Corporation
|
various
|
Name |
B**** L******
|
various
|
G**** C********
|
various
|
b******** L********
|
various
|
Physical Address |
425 rue de Goa
|
various
|
Antibes, 06600
|
various
|
France
|
various
|
Telephone Number |
04930********
|
various
|
+3349********
|
various
|
E-mail |
b******@intel.com
|
various
|
g******@intel.com
|
various
|
B******@intel.com
|
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | No |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | No |
various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 04/16/2024 |
various | 10/11/2023 |
various | 07/05/2023 |
various | 03/25/2023 |
various | 11/15/2022 |
various | 10/16/2022 |
various | 09/26/2022 |
various | 08/02/2022 |
various | 07/23/2022 |
various | 07/20/2022 |
various | 06/01/2022 |
various | 04/11/2022 |
various | 04/09/2022 |
various | 02/19/2022 |
various | 01/23/2022 |
various | 01/18/2022 |
various | 01/10/2022 |
various | 01/08/2022 |
various | 12/12/2021 |
various | 11/13/2021 |
various | 10/20/2021 |
various | 08/30/2021 |
various | 08/25/2021 |
various | 08/23/2021 |
various | 08/22/2021 |
various | 08/17/2021 |
various | 07/31/2021 |
various | 07/24/2021 |
various | 06/19/2021 |
various | 06/16/2021 |
various | 06/13/2021 |
various | 06/05/2021 |
various | 06/02/2021 |
various | 05/31/2021 |
various | 05/23/2021 |
various | 05/22/2021 |
various | 05/19/2021 |
various | 05/18/2021 |
various | 05/17/2021 |
various | 05/16/2021 |
various | 05/15/2021 |
various | 03/16/2021 |
various | 03/14/2021 |
various | 02/23/2021 |
various | 02/22/2021 |
various | 02/02/2021 |
various | 12/27/2020 |
various | 12/15/2020 |
various | 12/06/2020 |
various | 11/29/2020 |
various | 11/28/2020 |
various | 11/25/2020 |
various | 11/10/2020 |
various | 11/09/2020 |
various | 11/08/2020 |
various | 11/02/2020 |
various | 10/31/2020 |
various | 10/18/2020 |
various | 10/04/2020 |
various | 09/22/2020 |
various | 08/31/2020 |
various | 08/26/2020 |
various | 08/29/2020 |
various | 08/04/2020 |
various | 07/21/2020 |
various | 07/12/2020 |
various | 05/05/2020 |
various | 05/04/2020 |
various | 04/28/2020 |
various | 04/29/2020 |
various | 04/27/2020 |
various | 02/22/2020 |
various | 02/11/2020 |
various | 12/25/2019 |
various | 12/08/2019 |
various | 12/04/2019 |
various | 05/19/2019 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
various | DTS - Digital Transmission System |
various | DSS - Part 15 Spread Spectrum Transmitter |
various | JBP - Part 15 Class B Computing Device Peripheral |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Intel Wi-Fi 6 AX201 |
various | Intel Wireless AX201 |
various | Intel Wireless AX-201 |
various | Intel Wireless - AX201 |
various | Intel Wireless -AX201 |
various | Intel WiFi 6 AX201 |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
various | No |
various | Modular Equipment Type | Single Modular Approval |
various | Limited Single Modular Approval |
various | Purpose / Application is for | Class II Permissive Change |
various | Class II permissive change or modification of presently authorized equipment |
various | Original Equipment |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz and 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they
choose to integrate into a host product. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations.
Addition of a new antenna and antenna type for the UNII-4 Band. (Antenna type: Dipole Antenna Wieson Part no ARY121-0009-002-H0). |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.27W/kg and 1.52W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P33T convertible PC with Hong-BO 260-24347 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 1.52W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P33T convertible PC with Hong-BO 260-24347 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, and 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.09W/kg and 1.52W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P33T convertible PC with Hong-BO 260-24347 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in
this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This change is to add a new antenna for a monopole type (AWAN DQ60AYF0006 and HongBo DQ602377800 ) and Loop type (AWAN DQ60AYF0006 and HongBo DQ602377800). This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This change is to add a new antenna for a monopole type (AWAN DQ60AYF0006 and 2 HongBo DQ602377800 ) and Loop type (AWAN DQ60AYF0006 and HongBo DQ602377800). This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including
3 simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz,
40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This change is to add a new antenna for a monopole type (AWAN DQ60AYF0006 and HongBo DQ602377800 ) and Loop type (AWAN DQ60AYF0006 and HongBo DQ602377800). This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission
SAR requirements according to published KDB 616217 Supplement documentation. When all conditions
of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance,
or a new application. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device
containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.27W/kg and 0.99W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P33T convertible PC with Hong-BO 260-24347 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device
or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 0.99W/kg respectively.
This change establishes portable category SAR conditions for the
Dell model P33T convertible PC with Hong-BO 260-24347 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.
Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures.
This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to
determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application,
containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.69W/kg and 0.99W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P33T convertible PC with Hong-BO 260-24347 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz and 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.65W/kg and 1.37W/kg respectively.
This change to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz and 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.53W/kg and 0.98W/kg respectively.
This change to establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.44W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSC-I006R PC with WNC 6036B0324301 and 6036B0324101 antennas. TAS feature is enabled.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.67W/kg and 1.44W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSC-I006R PC with WNC 6036B0324301 and 6036B0324101 antennas. TAS feature is enabled.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.88W/kg and 1.44W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSC-I006R PC with WNC 6036B0324301 and 6036B0324101 antennas. TAS feature is enabled.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, and 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm
minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.11W/kg and 1.32W/kg respectively.
This device has been previously approved on 06/08/2020 as HP model HSN-C05C. No Hardware changes have been made. Only ISH driver will be enabled to support the virtual sensor for dynamic SAR Control as previously discussed with the FCC as shown in the KDB provided with this filing.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.32W/kg respectively.
This device has been previously approved on 06/08/2020 as HP model HSN-C05C. No Hardware changes have been made. Only ISH driver will be enabled to support the virtual sensor for dynamic SAR Control as previously discussed with the FCC as shown in the KDB provided with this filing.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.96W/kg and 1.32W/kg respectively.
This device has been previously approved on 06/08/2020 as HP model HSN-C05C. No Hardware changes have been made. Only ISH driver will be enabled to support the virtual sensor for dynamic SAR Control as previously discussed with the FCC as shown in the KDB provided with this filing.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.77W/kg and 1.01W/kg respectively.
This change establishes portable category SAR conditions for the Samsung models NP554XED, NP550XEZ PC with WNC BA42-00750A and BA42-00751A antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.01W/kg respectively.
This change establishes portable category SAR conditions for the Samsung models NP554XED, NP550XEZ PC with WNC BA42-00750A and BA42-00751A antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.28W/kg and 1.01W/kg respectively.
This change establishes portable category SAR conditions for the Samsung
models NP554XED, NP550XEZ PC with WNC BA42-00750A and BA42-00751A antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.38W/kg and 1.19W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model TP00137A PC with AVX 025.901X3.0001 and 025.901X4.0001 and AWAN 025.901WZ.0001 and 025.901X0.0001 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.14W/kg and 1.14W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model TP00137A PC with AVX 025.901X3.0001 and 025.901X4.0001 and AWAN 025.901WZ.0001 and 025.901X0.0001 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.08W/kg and 1.19W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model TP00137A PC with AVX 025.901X3.0001 and 025.901X4.0001 and AWAN 025.901WZ.0001 and 025.901X0.0001 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.07W/kg and 1.54W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model TP00128B PC with Amphenol TKE378-16-000-R and TKE379-16-000-R and JYT 10-NA0014601 and 10-NA0014701 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 1.54W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo
model TP00128B PC with Amphenol TKE378-16-000-R and
TKE379-16-000-R and JYT 10-NA0014601 and 10-NA0014701 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.51W/kg and 1.54W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model TP00128B PC with Amphenol TKE378-16-000-R and TKE379-16-000-R and JYT 10-NA0014601 and 10-NA0014701 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with
the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must
coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data demonstrating
compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in
this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a
host product. The highest reported Body and Simultaneous SAR values are 1.18W/kg and1.59W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model XE525QEA PC with Galtronics BA42-00743A and 8BA42-00743B antennas.
Antenna is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.31W/kg and 1.59W/kg respectively.
This change establishes portable category SAR conditions for the
Samsung model XE525QEA PC with Galtronics BA42-00743A and
8BA42-00743B antennas.
Antenna is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Power output has been reduced at the upper bandedge channels
as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. This module is approved in
mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with
equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator
to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific
final products may require the submission of a permissive change application, containing appropriate
data demonstrating compliance, or a new application. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.94W/kg and 1.59W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model XE525QEA PC with Galtronics BA42-00743A and 8BA42-00743B antennas.
Antenna is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 1.53W/kg respectively.
This change establishes portable category SAR conditions for the
Samsung model XE520QEA PC with Galtronics BA42-00743A and
8BA42-00743B antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described
in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band
operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.53W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model XE520QEA PC with Galtronics BA42-00743A and 8BA42-00743B antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multi-transmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain
may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable
host configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB616217 Supplement documentation. When all conditions of this
filing cannot be met installation of this device into specific final products may require the submission of a
permissive change application, containing appropriate data demonstrating compliance,or a new application.
OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance.Device is a client only device containing a 2 x 2 MIMO
configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.1.02W/kg and 1.53W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model XE520QEA PC with Galtronics BA42-00743A and 8BA42-00743B antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations.
Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used
with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB616217 Supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change
application, containing appropriate data demonstrating compliance,or a new application. OEM/Host
integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.77W/kg and 1.01W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP550XED PC with WNC BA42-00750A and BA42-00751A antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.28W/kg and 1.01W/kg respectively.
This change establishes portable category SAR conditions for the
Samsung model NP550XED PC with WNC BA42-00750A and BA42-00751A
antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.
Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures.
This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to
determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application,
containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled
for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host
product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.01W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP550XED PC with WNC BA42-00750A and BA42-00751A antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations.
Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used
with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB616217 Supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change
application, containing appropriate data demonstrating compliance,or a new application. OEM/Host
integrator must be provided with antenna installation instructions and transmitter operating conditions to
satisfy RF exposure compliance.Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.29W/kg and 0.97W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP750BCJ PC with 81.ELA15.G15 and 81.ELA15.G16 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described
in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band
operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.47W/kg and 0.97W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP750BCJ PC with 81.ELA15.G15 and 81.ELA15.G16 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.12W/kg and 0.97W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP750BCJ PC with 81.ELA15.G15 and 81.ELA15.G16 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multi-transmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or
similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers
must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.09W/kg and 1.55W/kg respectively.
This change establishes portable category SAR conditions for the HP
model TPN-C156 PC with INPAQ WA-P-LE-02-036 and WA-P-LE-02-035 and
High-Tek DC33002KW00 and DC33002KW10 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.
Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures.
This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s)
with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation
of this device into specific final products may require the submission of a permissive change application, containing
appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth
modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4
or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for
complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 1.05W/kg and 1.55W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C156 PC with INPAQ WA-P-LE-02-036 and WA-P-LE-02-035 and High-Tek DC33002KW00 and DC33002KW10 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge
channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those
antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this
transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure
RF exposure compliance, including simultaneous transmission SAR requirements according to published
KDB616217 Supplement documentation. When all conditions of this filing cannot be met installation of this
device into specific final products may require the submission of a permissive change application, containing
appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.Device
is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations
as described in this filing.OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product. The highest reported Body and
Simultaneous SAR values are 0.78W/kg and 1.55W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C156 PC with INPAQ WA-P-LE-02-036 and WA-P-LE-02-035 and High-Tek DC33002KW00 and DC33002KW10 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multi-transmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain
may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable
host configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB616217 Supplement documentation. When all conditions of this
filing cannot be met installation of this device into specific final products may require the submission of a
permissive change application, containing appropriate data demonstrating compliance,or a new application.
OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance.Device is a client only device containing a 2 x 2MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.72W/kg and 1.43W/kg respectively.
This change establishes portable category SAR conditions with time averaging SAR (TAS) algorithm for the HP model HSN-I41C-4 PC with AWAN AUP6Y-100071 (Tx1) and AUP6Y-100072 (Tx2) antennas, Hong Bo 260-27442 (Tx1) and 260-27441 (Tx2), WNC 81EABD15.G06 (Tx1) and 81EABD15.G05 (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multi-transmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device
or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers
must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 1.43W/kg respectively.
This change establishes portable category SAR conditions with time averaging SAR (TAS) algorithm for the HP model HSN-I41C-4 PC with AWAN AUP6Y-100071 (Tx1) and AUP6Y-100072 (Tx2) antennas, Hong Bo 260-27442 (Tx1) and 260-27441 (Tx2), WNC 81EABD15.G06 (Tx1) and 81EABD15.G05 (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into
specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in
this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations
as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous
SAR values are 1.14W/kg and 1.43W/kg respectively.
This change establishes portable category SAR conditions with time averaging SAR (TAS) algorithm for the HP model HSN-I41C-4 PC with AWAN AUP6Y-100071 (Tx1) and AUP6Y-100072 (Tx2) antennas, Hong Bo 260-27442 (Tx1) and 260-27441 (Tx2), WNC 81EABD15.G06 (Tx1) and 81EABD15.G05 (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When
all conditions of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance, or a new
application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client
only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in
this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions
and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and
Simultaneous SAR values are 1.06W/kg and 1.20W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model XE345XDA-MA1TM PC with Galtronics 02112140-07483 and 02112140-07484 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multi-transmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device
or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.15W/kg and 1.20W/kg respectively.
This change establishes portable category SAR conditions for the
Samsung model XE345XDA-MA1TM PC with Galtronics 02112140-07483 and
02112140-07484 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission
SAR requirements according to published KDB616217 Supplement documentation. When all
conditions of this filing cannot be met installation of this device into specific final products may require
the submission of a permissive change application, containing appropriate data demonstrating
compliance,or a new application. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance.Device is a client
only device containing a 2 x 2MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.92W/kg and 1.20W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model XE345XDA-MA1TM PC with Galtronics 02112140-07483 and 02112140-07484 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.45W/kg and 1.53W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSC-I001R PC with AWAN AUP6Y-100102 and AUP5Y-100006 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this
transmitter must not transmit simultaneously with any other antenna or transmitter, except
in accordance with FCC multitransmitter product procedures. Grantee must provide
installation and operating instructions for complying with FCC multi-transmitter product
procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal
or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08W/kg and 1.53W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSC-I001R PC with AWAN AUP6Y-100102 and AUP5Y-100006 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.20W/kg and 1.53W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSC-I001R PC with AWAN AUP6Y-100102 and AUP5Y-100006 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this
transmitter must not transmit simultaneously with any other antenna or transmitter, except
in accordance with FCC multitransmitter product procedures. Grantee must provide
installation and operating instructions for complying with FCC multi-transmitter product
procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal
or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.19W/kg and 1.52W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo
model TP00128A PC with JYT NA00053 and NA00054 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.88W/kg and 1.52W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model TP00128A PC with JYT NA00053 and NA00054 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.88W/kg and 1.52W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model TP00128A PC with JYT NA00053 and NA00054 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with
the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate
with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance, or a new
application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a
client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as
described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter
operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported
Body and Simultaneous SAR values are 1.20W/kg and 1.39W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model XE345XDA PC with Galtronics 02112140-07483 and 02112140-07484 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.19W/kg and 1.39W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model XE345XDA PC with Galtronics 02112140-07483 and 02112140-07484 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations.
Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used
with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB616217 Supplement documentation. When all conditions of this
filing cannot be met installation of this device into specific final products may require the submission of a
permissive change application, containing appropriate data demonstrating compliance,or a new
application. OEM/Host integrator must be provided with antenna installation instructions and transmitter
operating conditions to satisfy RF exposure compliance.Device is a client only device containing a 2 x
2MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.91W/kg and 1.39W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model XE345XDA PC with Galtronics 02112140-07483 and 02112140-07484 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this
transmitter must not transmit simultaneously with any other antenna or transmitter, except
in accordance with FCC multi-transmitter product procedures. Grantee must provide
installation and operating instructions for complying with FCC multi-transmitter product
procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal
or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.21W/kg and 1.42W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model XE345XDA PC with Galtronics 02112140-07483 and 02112140-07484 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.Device is a client only device containing a 2 x 2MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.92W/kg and 1.42W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model XE345XDA PC with Galtronics 02112140-07483 and 02112140-07484 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.21W/kg and 1.42W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model XE345XDA PC with Galtronics 02112140-07483 and 02112140-07484 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain
may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable
host configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB616217 Supplement documentation. When all conditions of this
filing cannot be met installation of this device into specific final products may require the submission of a
permissive change application, containing appropriate data demonstrating compliance,or a new application.
OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2MIMO
configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.141W/kg and 1.545W/kg respectively.
This change establishes portable category SAR conditions for the Intel model CMCN1CC PC with WGT EGCANWIPB01+A-03 (Tx1) and EGCANWIPB02+A-03 (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or
similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers
must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.621W/kg and 1.545W/kg respectively.
This change establishes portable category SAR conditions for the Intel model CMCN1CC PC with WGT EGCANWIPB01+A-03 (Tx1) and
EGCANWIPB02+A-03 (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.
Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures.
This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to
determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application,
containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled
for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.049W/kg and 1.545W/kg respectively.
This change establishes portable category SAR conditions for the Intel model CMCN1CC PC with WGT EGCANWIPB01+A-03 (Tx1) and EGCANWIPB02+A-03 (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain
may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable
host configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB616217 Supplement documentation. When all conditions of this
filing cannot be met installation of this device into specific final products may require the submission of a
permissive change application, containing appropriate data demonstrating compliance,or a new application.
OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.61W/kg and 1.22W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-Q250 PC with INPAQ DQ60PLBLB45 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.
Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures.
This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to
determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application,
containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled
for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.92W/kg and 1.22W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-Q250 PC with INPAQ DQ60PLBLB45 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or
similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers
must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.15W/kg and 1.22W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-Q250 PC with INPAQ DQ60PLBLB45 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and
installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.16W/kg and 1.33W/kg respectively.
This change establishes portable category SAR conditions for the
Samsung model XE340XDA PC with Galtronics 002112140-07484 and
02112140-07483 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.
Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures.
This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to
determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application,
containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled
for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.04W/kg and 1.33W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model XE340XDA PC with Galtronics 002112140-07484 and 02112140-07483 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain
may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable
host configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB616217 Supplement documentation. When all conditions of this
filing cannot be met installation of this device into specific final products may require the submission of a
permissive change application, containing appropriate data demonstrating compliance,or a new application.
OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2MIMO
configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.17W/kg and 1.33W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model XE340XDA PC with Galtronics 002112140-07484 and 02112140-07483 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When
all conditions of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance, or a new
application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client
only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in
this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions
and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.17W/kg and 1.31W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-C11C PC with Inpaq WA-P-LB-02-867 (Tx1) and WA-P-LB-02-868 (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.50W/kg and 1.31W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-C11C PC with Inpaq WA-P-LB-02-867 (Tx1) and WA-P-LB-02-868 (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this
transmitter. End-users and installers must be provided with transmitter operating conditions for
satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.14W/kg and 1.31W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-C11C PC with Inpaq WA-P-LB-02-867 (Tx1) and WA-P-LB-02-868 (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this
transmitter. End-users and installers must be provided with transmitter operating conditions for
satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 1.42W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model TP00127A PC with AWAN 025.901S1.0041 and 025.901S1.0051 and WNC 025.901S1.0001 and 025.901S1.0011 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When
all conditions of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance, or a new
application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client
only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in
this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.33W/kg and 1.42W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model TP00127A PC with AWAN 025.901S1.0041 and 025.901S1.0051 and WNC 025.901S1.0001 and 025.901S1.0011 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.35W/kg and 1.42W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model TP00127A PC with AWAN 025.901S1.0041 and 025.901S1.0051 and WNC 025.901S1.0001 and 025.901S1.0011 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.56W/kg and 1.19W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-C12C PC with WNC 81ELA415.G13 and 81ELA415.G18 Main and Aux and HB 330-24000 Main and Aux antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.19W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-C12C PC with WNC 81ELA415.G13 and 81ELA415.G18 Main and Aux and HB 330-24000 Main and Aux antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with
the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate
with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance, or a new
application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a
client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as
described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter
operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.17W/kg and 1.19W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-C12C PC with WNC 81ELA415.G13 and 81ELA415.G18 Main and Aux and HB 330-24000 Main and Aux antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.04W/kg and 1.48W/kg respectively.
This change establishes portable category SAR conditions for the Dell model T04H PC with HB DC33002GR2L and DC33002GR2L and WNC 81ELAW15.G51 and 81ELAW15.G51 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with
the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate
with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance, or a new
application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a
client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as
described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter
operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.25W/kg and 1.48W/kg respectively.
This change establishes portable category SAR conditions for the Dell model T04H PC with HB DC33002GR2L and DC33002GR2L and WNC 81ELAW15.G51 and 81ELAW15.G51 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.31W/kg and 1.48W/kg respectively.
This change establishes portable category SAR conditions for the Dell model T04H PC with HB DC33002GR2L and DC33002GR2L and WNC 81ELAW15.G51 and 81ELAW15.G51 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.03W/kg and 1.48W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP730QDA PC with ICT BA42-00677A (Tx1) and BA42-00678A (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter mustnot transmit simultaneously with any other antenna or transmitter, except in accordance with FCCmultitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.19W/kg and 1.48W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP730QDA PC with ICT BA42-00677A (Tx1) and BA42-00678A (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into
specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in
this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations
as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.13W/kg and 1.51W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-W151 PC with WNC 81EABD15.G39 and 81EABD15.G40 and HTK 0ACAR020018N and ACAR020019N antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or
similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must
be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.09W/kg and 1.51W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-W151 PC with WNC 81EABD15.G39 and 81EABD15.G40 and HTK 0ACAR020018N and ACAR020019N antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with
the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate
with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance, or a new
application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a
client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as
described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter
operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.82W/kg and 1.48W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP730QDA PC with ICT BA42-00677A (Tx1) and BA42-00678A (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain
may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable
host configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 Supplement documentation. When all conditions of this
filing cannot be met installation of this device into specific final products may require the submission of a
permissive change application, containing appropriate data demonstrating compliance, or a new application.
OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO
configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host
integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.51W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-W151 PC with WNC 81EABD15.G39 and 81EABD15.G40 and HTK 0ACAR020018N and ACAR020019N antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each
transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.74W/kg and 1.48W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo Yoga Duet 7 13ITL6 PC with Inpaq WA-F-LB-02-242 (Tx1) and WA-F-LB-02-241(Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and
installers must be provided with transmitter operating conditions for satisfying RF exposure
compliance. The highest reported Body and Simultaneous SAR values are 0.38W/kg and 1.48W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo Yoga Duet 7 13ITL6 PC with Inpaq WA-F-LB-02-242 (Tx1) and WA-F-LB-02-241(Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. This module is approved in
mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with
equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator
to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific
final products may require the submission of a permissive change application, containing appropriate
data demonstrating compliance, or a new application. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either
2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for
complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.10W/kg and 1.48W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo Yoga Duet 7 13ITL6 PC with Inpaq WA-F-LB-02-242 (Tx1) and WA-F-LB-02-241(Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 1.54W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo ThinkPad X1 Yoga Gen 6, model TP00128A with Amphenol TKC111-16-010-C (Tx1) and TKC112-16-010-C (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission
SAR requirements according to published KDB 616217 Supplement documentation. When all
conditions of this filing cannot be met installation of this device into specific final products may require
the submission of a permissive change application, containing appropriate data demonstrating
compliance, or a new application. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client
only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as
described in this filing. OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.22W/kg and 1.54W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo ThinkPad X1 Yoga Gen 6, model TP00128A with Amphenol TKC111-16-010-C (Tx1) and TKC112-16-010-C (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into
specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in
this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations
as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.04W/kg and 1.54W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo ThinkPad X1 Yoga Gen 6, model TP00128A with Amphenol TKC111-16-010-C (Tx1) and TKC112-16-010-C (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described
in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band
operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and
Simultaneous SAR values are 0.80W/kg and 1.59W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo ThinkPad x12, model TP00118A with High Tek 025.901QK.0001 (Tx1) and 025.901QJ.0001(Tx2) antennas and WNC 025.901QE.0001 (Tx1) and 025.901QD.0001( Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain
may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable
host configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 Supplement documentation. When all conditions of this
filing cannot be met installation of this device into specific final products may require the submission of a
permissive change application, containing appropriate data demonstrating compliance, or a new
application. OEM/Host integrator must be provided with antenna installation instructions and transmitter
operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host
integrator is responsible for complying with the instructions and requirements for each transmitter they
choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.02W/kg and 1.59W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo ThinkPad x12, model TP00118A with High Tek 025.901QK.0001 (Tx1) and 025.901QJ.0001(Tx2) antennas and WNC 025.901QE.0001 (Tx1) and 025.901QD.0001( Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and
installers must be provided with transmitter operating conditions for satisfying RF exposure
compliance. The highest reported Body and Simultaneous SAR values are 0.30W/kg and 1.59W/kg respectively.
This change establishes portable category SAR conditions for
the Lenovo ThinkPad x12, model TP00118A with High Tek
025.901QK.0001 (Tx1) and 025.901QJ.0001(Tx2) antennas and WNC
025.901QE.0001 (Tx1) and 025.901QD.0001( Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each
transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.95W/kg and 1.57W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P95F PC with Ethertronics DC33002CL3L (Tx1) and (Tx2) antennas and HongBo DC33002CQ1L (Tx1) and (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and
installers must be provided with transmitter operating conditions for satisfying RF exposure
compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and 1.57W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P95F PC with Ethertronics DC33002CL3L (Tx1) and (Tx2) antennas and HongBo DC33002CQ1L (Tx1) and (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. This module is approved in
mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with
equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator
to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific
final products may require the submission of a permissive change application, containing appropriate
data demonstrating compliance, or a new application. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either
2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for
complying with the instructions and requirements for each transmitter they choose to integrate into a
host product. The highest reported Body and Simultaneous SAR values are 0.86W/kg and 1.57W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P95F PC with Ethertronics DC33002CL3L (Tx1) and (Tx2) antennas and HongBo DC33002CQ1L (Tx1) and (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain
may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable
host configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 Supplement documentation. When all conditions of this
filing cannot be met installation of this device into specific final products may require the submission of a
permissive change application, containing appropriate data demonstrating compliance, or a new application.
OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO
configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host
integrator is responsible for complying with the instructions and requirements for each transmitter they
choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.76W/kg and 1.36W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P94F PC with Ethertronics DC33002CL3L (Tx1) and (Tx2) antennas and HongBo DC33002CQ1L (Tx1) and (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into
specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in
this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations
as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.20W/kg and 1.36W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P94F PC with Ethertronics DC33002CL3L (Tx1) and (Tx2) antennas and HongBo DC33002CQ1L (Tx1) and (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or
similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must
be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08W/kg and 1.36W/kg respectively.
This change establishes portable category SAR conditions for
the Dell model P94F PC with Ethertronics DC33002CL3L (Tx1) and (Tx2)
antennas and HongBo DC33002CQ1L (Tx1) and (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each
transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.30W/kg and 1.58W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P136G PC (Aluminum and Carbon Fiber Enclosures) with SPEED F-0G-FH-6119-003-00 (Tx1 and Tx2) antennas, HongBo 260-24329 (Tx1 and Tx2) antennas, WNC 81ELAW15.G08 (Tx1 and Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. This module is approved in
mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with
equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator
to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific
final products may require the submission of a permissive change application, containing appropriate
data demonstrating compliance, or a new application. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either
2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for
complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.06W/kg and 1.58W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P136G PC (Aluminum and Carbon Fiber Enclosures) with SPEED F-0G-FH-6119-003-00 (Tx1 and Tx2) antennas, HongBo 260-24329 (Tx1 and Tx2) antennas, WNC 81ELAW15.G08 (Tx1 and Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and
installers must be provided with transmitter operating conditions for satisfying RF exposure
compliance. The highest reported Body and Simultaneous SAR values are 0.21W/kg and 1.58W/kg respectively.
This change establishes portable category SAR conditions for
the Dell model P136G PC (Aluminum and Carbon Fiber Enclosures) with
SPEED F-0G-FH-6119-003-00 (Tx1 and Tx2) antennas, HongBo 260-24329
(Tx1 and Tx2) antennas, WNC 81ELAW15.G08 (Tx1 and Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and
installers must be provided with transmitter operating conditions for satisfying RF exposure
compliance. The highest reported Body and Simultaneous SAR values are 0.13W/kg and 1.44W/kg respectively.
This change establishes portable category SAR conditions for
the Dell model P135G PC (Aluminum and Carbon Fiber Enclosures) with
SPEED F-0G-FH-6119-003-00 (Tx1 and Tx2) antennas, HongBo 260-24329
(Tx1 and Tx2) antennas, WNC 81ELAW15.G08 (Tx1 and Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. This module is approved in
mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with
equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator
to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific
final products may require the submission of a permissive change application, containing appropriate
data demonstrating compliance, or a new application. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either
2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for
complying with the instructions and requirements for each transmitter they choose to integrate into a
host product. The highest reported Body and Simultaneous SAR values are 1.17W/kg and 1.44W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P135G PC (Aluminum and Carbon Fiber Enclosures) with SPEED F-0G-FH-6119-003-00 (Tx1 and Tx2) antennas, HongBo 260-24329 (Tx1 and Tx2) antennas, WNC 81ELAW15.G08 (Tx1 and Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each
transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.44W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P135G PC (Aluminum and Carbon Fiber Enclosures) with SPEED F-0G-FH-6119-003-00 (Tx1 and Tx2) antennas, HongBo 260-24329 (Tx1 and Tx2) antennas, WNC 81ELAW15.G08 (Tx1 and Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain
may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable
host configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 Supplement documentation. When all conditions of this
filing cannot be met installation of this device into specific final products may require the submission of a
permissive change application, containing appropriate data demonstrating compliance, or a new application.
OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO
configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host
integrator is responsible for complying with the instructions and requirements for each transmitter they
choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.14W/kg and 1.57W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P134G PC with SPEED F-0G-FH-6118-003-00 (Tx1 and Tx2) antennas, HongBo 260-24326 (Tx1 and Tx2) antennas, WNC 81ELAW15.G03 (Tx1 and Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or
similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must
be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.25W/kg and 1.57W/kg respectively.
This change establishes portable category SAR conditions for
the Dell model P134G PC with SPEED F-0G-FH-6118-003-00 (Tx1 and Tx2)
antennas, HongBo 260-24326 (Tx1 and Tx2) antennas, WNC
81ELAW15.G03 (Tx1 and Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into
specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in
this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations
as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.45W/kg and 1.57W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P134G PC with SPEED F-0G-FH-6118-003-00 (Tx1 and Tx2) antennas, HongBo 260-24326 (Tx1 and Tx2) antennas, WNC 81ELAW15.G03 (Tx1 and Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported
Body and Simultaneous SAR values are 0.18W/kg and 1.34W/kg respectively.
This change establishes portable category SAR conditions for
the Dell model P133G PC with SPEED F-0G-FH-6118-003-00 (Tx1 and Tx2)
antennas, HongBo 260-24326 (Tx1 and Tx2) antennas, WNC
81ELAW15.G03 (Tx1 and Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain
may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable
host configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 Supplement documentation. When all conditions of this
filing cannot be met installation of this device into specific final products may require the submission of a
permissive change application, containing appropriate data demonstrating compliance, or a new application.
OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO
configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host
integrator is responsible for complying with the instructions and requirements for each transmitter they
choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.02W/kg and 1.34W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P133G PC with SPEED F-0G-FH-6118-003-00 (Tx1 and Tx2) antennas, HongBo 260-24326 (Tx1 and Tx2) antennas, WNC 81ELAW15.G03 (Tx1 and Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described
in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band
operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.34W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P133G PC with SPEED F-0G-FH-6118-003-00 (Tx1 and Tx2) antennas, HongBo 260-24326 (Tx1 and Tx2) antennas, WNC 81ELAW15.G03 (Tx1 and Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.09W/kg and 1.50W/kg respectively.
This change is to request approval for portable category specific
host notebook PC, Dell model number - P33T, with antenna AWAN part no
AYP6Y-200021 (Tx1 and Tx2), HongBo part no 260-24347 (Tx1 and Tx2)
and Speedwire part no F-0G-FH-6128-002-00 (Tx1 and Tx2).
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into
specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in
this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations
as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous
SAR values are 1.09W/kg and 1.50W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P33T, with antenna AWAN part no AYP6Y-200021 (Tx1 and Tx2), HongBo part no 260-24347 (Tx1 and Tx2) and Speedwire part no F-0G-FH-6128-002-00 (Tx1 and Tx2).
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge
channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with
the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must
coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data demonstrating
compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host
integrator is responsible for complying with the instructions and requirements for each transmitter they choose to
integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.42W/kg and 1.50W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P33T, with antenna AWAN part no AYP6Y-200021 (Tx1 and Tx2), HongBo part no 260-24347 (Tx1 and Tx2) and Speedwire part no F-0G-FH-6128-002-00 (Tx1 and Tx2).
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge
channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with
the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must
coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data demonstrating
compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host
integrator is responsible for complying with the instructions and requirements for each transmitter they choose to
integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.03W/kg and 1.56W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model XE530QDA/XE531QDA PC with WNC 81XBLA15.G06 (Tx1) and 81XBLA15.G07 (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into
specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in
this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations
as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.12W/kg and 1.56W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model XE530QDA/XE531QDA PC with WNC 81XBLA15.G06 (Tx1) and 81XBLA15.G07 (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.44W/kg and 1.56W/kg respectively.
This change establishes portable category SAR conditions for
the Samsung model XE530QDA/XE531QDA PC with WNC
81XBLA15.G06 (Tx1) and 81XBLA15.G07 (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.23W/kg and 1.43W/kg respectively.
This change is to request approval for portable category specific
host notebook PC, Dell model number - P110F, with antenna Speedwire
part no F-0G-FH-6120-003-00 (Tx1 and Tx2) and WNC part no
81ELAW15.G13 (Tx1 and Tx2).
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each
transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.92W/kg and 1.43W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P110F, with antenna Speedwire part no F-0G-FH-6120-003-00 (Tx1 and Tx2) and WNC part no 81ELAW15.G13 (Tx1 and Tx2).
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. This module is approved in
mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with
equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator
to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific
final products may require the submission of a permissive change application, containing appropriate
data demonstrating compliance, or a new application. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either
2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for
complying with the instructions and requirements for each transmitter they choose to integrate into a
host product. The highest reported Body and Simultaneous SAR values are 0.69W/kg and 1.43W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P110F, with antenna Speedwire part no F-0G-FH-6120-003-00 (Tx1 and Tx2) and WNC part no 81ELAW15.G13 (Tx1 and Tx2).
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each
transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.11W/kg and 0.93W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-Q252 PC with AWAN AYP6Y-200019 (Tx1) and (Tx2), AWAN AYP6Y-200018 (Tx1) and (Tx2), Inpaq WA-P-LBLB-02-122 (Tx1) and (Tx2), Inpaq WA-P-LBLB-02-121 (Tx1) and (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. This module is approved in
mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with
equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator
to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific
final products may require the submission of a permissive change application, containing appropriate
data demonstrating compliance, or a new application. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either
2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for
complying with the instructions and requirements for each transmitter they choose to integrate into a
host product. The highest reported Body and Simultaneous SAR values are 0.70W/kg and 1.51W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I32C PC with AWAN AUP6Y-100090 (Tx1) and AUP6Y-100091 (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each
transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.71W/kg and 1.51W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I32C PC with AWAN AUP6Y-100090 (Tx1) and AUP6Y-100091 (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. This module is approved in
mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with
equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator
to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific
final products may require the submission of a permissive change application, containing appropriate
data demonstrating compliance, or a new application. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either
2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for
complying with the instructions and requirements for each transmitter they choose to integrate into a
host product. The highest reported Body and Simultaneous SAR values are 0.57W/kg and 0.93W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-Q252 PC with AWAN AYP6Y-200019 (Tx1) and (Tx2), AWAN AYP6Y-200018 (Tx1) and (Tx2), Inpaq WA-P-LBLB-02-122 (Tx1) and (Tx2), Inpaq WA-P-LBLB-02-121 (Tx1) and (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 0.93W/kg respectively.
This change establishes portable category SAR conditions for
the HP model TPN-Q252 PC with AWAN AYP6Y-200019 (Tx1) and (Tx2),
AWAN AYP6Y-200018 (Tx1) and (Tx2), Inpaq WA-P-LBLB-02-122 (Tx1) and
(Tx2), Inpaq WA-P-LBLB-02-121 (Tx1) and (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.09W/kg and 1.51W/kg respectively.
This change establishes portable category SAR conditions for
the HP model HSN-I32C PC with AWAN AUP6Y-100090 (Tx1) and
AUP6Y-100091 (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.22W/kg and 0.80W/kg respectively.
This change establishes portable category SAR conditions for
the HP model HSN-C10C-4 PC with AWAN AUP6Y-100016 (Tx1) and WAAUP6Y-
100017 (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. This module is approved in
mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with
equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator
to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific
final products may require the submission of a permissive change application, containing appropriate
data demonstrating compliance, or a new application. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either
2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for
complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.93W/kg and 0.80W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-C10C-4 PC with AWAN AUP6Y-100016 (Tx1) and WAAUP6Y- 100017 (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. This module is approved in
mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with
equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator
to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific
final products may require the submission of a permissive change application, containing appropriate
data demonstrating compliance, or a new application. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either
2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for
complying with the instructions and requirements for each transmitter they choose to integrate into a
host product. The highest reported Body and Simultaneous SAR values are 0.72W/kg and 1.43W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I41C-4 PC with AWAN AUP6Y-100071 (Tx1) and AUP6Y-100072 (Tx2) antennas, HongBo 260-27442 (Tx1) and 260-27441 (Tx2), WNC 81EABD15.G06 (Tx1) and 81EABD15.G05 (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When
all conditions of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance, or a new
application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client
only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in
this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions
and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.91W/kg and 0.80W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-C10C-4 PC with AWAN AUP6Y-100016 (Tx1) and WAAUP6Y- 100017 (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When
all conditions of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance, or a new
application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client
only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in
this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions
and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.14W/kg and 1.43W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I41C-4 PC with AWAN AUP6Y-100071 (Tx1) and AUP6Y-100072 (Tx2) antennas, HongBo 260-27442 (Tx1) and 260-27441 (Tx2), WNC 81EABD15.G06 (Tx1) and 81EABD15.G05 (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 1.43W/kg respectively.
This change establishes portable category SAR conditions for
the HP model HSN-I41C-4 PC with AWAN AUP6Y-100071 (Tx1) and
AUP6Y-100072 (Tx2) antennas, HongBo 260-27442 (Tx1) and 260-27441
(Tx2), WNC 81EABD15.G06 (Tx1) and 81EABD15.G05 (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.32W/kg respectively.
This change establishes portable category SAR conditions for
the HP model HSN-C10C PC with Inpaq WA-P-LB-02-711 (Tx1) & WA-P-LB-02-712 (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When
all conditions of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance, or a new
application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client
only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in
this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions
and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.96W/kg and 1.32W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-C10C PC with Inpaq WA-P-LB-02-711 (Tx1) & WA-P-LB-02-712 (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain
may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable
host configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 Supplement documentation. When all conditions of this
filing cannot be met installation of this device into specific final products may require the submission of a
permissive change application, containing appropriate data demonstrating compliance, or a new application.
OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO
configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host
integrator is responsible for complying with the instructions and requirements for each transmitter they
choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.11W/kg and 1.32W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-C10C PC with Inpaq WA-P-LB-02-711 (Tx1) & WA-P-LB-02-712 (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. This module is approved in
mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with
equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator
to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific
final products may require the submission of a permissive change application, containing appropriate
data demonstrating compliance, or a new application. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either
2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations.
Addition of Dipole Antenna, the antenna type is different from the original application. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When
all conditions of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance, or a new
application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client
only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in
this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations.
Addition of Dipole Antenna, the antenna type is different from the original application. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations.
Addition of Dipole Antenna, the antenna type is different from the original application. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and
installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 1.42W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P123G PC with SPEED F.0G.FS-6094-005-00 (Tx1 & Tx2) antennas and WNC 81EABC15.G32(Tx1 & Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. This module is approved in
mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with
equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator
to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific
final products may require the submission of a permissive change application, containing appropriate
data demonstrating compliance, or a new application. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either
2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for
complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.84W/kg and 1.42W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P123G PC with SPEED F.0G.FS-6094-005-00 (Tx1 & Tx2) antennas and WNC 81EABC15.G32(Tx1 & Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each
transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.97W/kg and 1.42W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P123G PC with SPEED F.0G.FS-6094-005-00 (Tx1 & Tx2) antennas and WNC 81EABC15.G32(Tx1 & Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or
similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers
must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.09W/kg and 1.10W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo IdeaPad Slim9 14ITL5 PC with Luxshare DC33001NN00 (Tx1/Tx2) antennas, Speed DC33001NP00 (Tx1/Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission
SAR requirements according to published KDB 616217 Supplement documentation. When all conditions
of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance,
or a new application. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device
containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in
this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for
each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.68W/kg and 1.10W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo IdeaPad Slim9 14ITL5 PC with Luxshare DC33001NN00 (Tx1/Tx2) antennas, Speed DC33001NP00 (Tx1/Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When
all conditions of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance, or a new
application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client
only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in
this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions
and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.10W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo IdeaPad Slim9 14ITL5 PC with Luxshare DC33001NN00 (Tx1/Tx2) antennas, Speed DC33001NP00 (Tx1/Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When
all conditions of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance, or a new
application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client
only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in
this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions
and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.16W/kg and 1.27W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-Q250 PC with Inpaq DQ60PLBLB45 (Tx1/Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08W/kg and 1.27W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-Q250 PC with Inpaq DQ60PLBLB45 (Tx1/Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain
may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable
host configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 Supplement documentation. When all conditions of this
filing cannot be met installation of this device into specific final products may require the submission of a
permissive change application, containing appropriate data demonstrating compliance, or a new application.
OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO
configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host
integrator is responsible for complying with the instructions and requirements for each transmitter they
choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.71W/kg and 1.27W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-Q250 PC with Inpaq DQ60PLBLB45 (Tx1/Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. This module is approved in
mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with
equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator
to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific
final products may require the submission of a permissive change application, containing appropriate
data demonstrating compliance, or a new application. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either
2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for
complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.23W/kg and 1.08W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C152 PC with WNC DC33002DM00 (Tx1) and DC33002DM10 (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.09W/kg and 1.08W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C152 PC with WNC DC33002DM00 (Tx1) and DC33002DM10 (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When
all conditions of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance, or a new
application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client
only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in
this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions
and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.09W/kg and 1.08W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C152 PC with WNC DC33002DM00 (Tx1) and DC33002DM10 (Tx2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. This module is approved in
mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with
equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator
to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific
final products may require the submission of a permissive change application, containing appropriate
data demonstrating compliance, or a new application. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either
2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for
complying with the instructions and requirements for each transmitter they choose to integrate into a
host product. The highest reported Body and Simultaneous SAR values are 1.02W/kg and 1.33W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo Yoga 9 14ITL5 with Speed DC33001NT00 (Tx1 and Tx2) antennas, ICT DC33001NV00 (Tx1 and Tx2) antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.20W/kg and 1.33W/kg respectively.
This change establishes portable category SAR conditions for
the Lenovo Yoga 9 14ITL5 with Speed DC33001NT00 (Tx1 and Tx2)
antennas, ICT DC33001NV00 (Tx1 and Tx2) antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each
transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.67W/kg and 1.33W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo Yoga 9 14ITL5 with Speed DC33001NT00 (Tx1 and Tx2) antennas, ICT DC33001NV00 (Tx1 and Tx2) antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each
transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.12W/kg and 1.51W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-Q248 PC with WNC 81EABB15.GAX (Tx1 and Tx2) antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.01W/kg and 1.51W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-Q248 PC with WNC 81EABB15.GAX (Tx1 and Tx2) antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. This module is approved in
mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with
equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator
to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific
final products may require the submission of a permissive change application, containing appropriate
data demonstrating compliance, or a new application. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either
2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for
complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.62W/kg and 1.51W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-Q248 PC with WNC 81EABB15.GAX (Tx1 and Tx2) antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. This module is approved in
mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with
equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator
to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific
final products may require the submission of a permissive change application, containing appropriate
data demonstrating compliance, or a new application. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either
2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for
complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.64W/kg and 1.60W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo Yoga Duet 7 13IML05 PC with Inpaq WA-F-LB-03-123 (Tx1) & WA-F-LB-03-122 (Tx2) antennas, Innowave RX-WIFI-MAIN-T6.1(Tx1) & RX-WIFI-AUX-T09.1 (Tx2) antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When
all conditions of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance, or a new
application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client
only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in
this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions
and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.00W/kg and 1.60W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo Yoga Duet 7 13IML05 PC with Inpaq WA-F-LB-03-123 (Tx1) & WA-F-LB-03-122 (Tx2) antennas, Innowave RX-WIFI-MAIN-T6.1(Tx1) & RX-WIFI-AUX-T09.1 (Tx2) antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.38W/kg and 1.60W/kg respectively.
This change establishes portable category SAR conditions for
the Lenovo Yoga Duet 7 13IML05 PC with Inpaq WA-F-LB-03-123 (Tx1) &
WA-F-LB-03-122 (Tx2) antennas, Innowave RX-WIFI-MAIN-T6.1(Tx1) &
RX-WIFI-AUX-T09.1 (Tx2) antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each
transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.48W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P92F PC with WNC 81ELAS15.G39 (Tx1) and 81ELAS15.G40 (Tx2) antennas and HongBo 260-27353(Tx1) and 260-27354 (Tx2) antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08W/kg and 1.48W/kg respectively.
This change establishes portable category SAR conditions for
the Dell model P92F PC with WNC 81ELAS15.G39 (Tx1) and
81ELAS15.G40 (Tx2) antennas and HongBo 260-27353(Tx1) and
260-27354 (Tx2) antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. This module is approved in
mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with
equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator
to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific
final products may require the submission of a permissive change application, containing appropriate
data demonstrating compliance, or a new application. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either
2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for
complying with the instructions and requirements for each transmitter they choose to integrate into a
host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.48W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P92F PC with WNC 81ELAS15.G39 (Tx1) and 81ELAS15.G40 (Tx2) antennas and HongBo 260-27353(Tx1) and 260-27354 (Tx2) antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.31W/kg and 0.80W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-C05C-4 PC with AWAN AUP6Y-100016 and AUP6Y-100017 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.22W/kg and 0.80W/kg respectively.
This change establishes portable category SAR conditions for
the HP model HSN-C05C-4 PC with AWAN AUP6Y-100016 and
AUP6Y-100017 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. This module is approved in
mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with
equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator
to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific
final products may require the submission of a permissive change application, containing appropriate
data demonstrating compliance, or a new application. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either
2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for
complying with the instructions and requirements for each transmitter they choose to integrate into a
host product. The highest reported Body and Simultaneous SAR values are 1.31W/kg and 0.80W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-C05C-4 PC with AWAN AUP6Y-100016 and AUP6Y-100017 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each
transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.96W/kg and 1.32W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-C05C PC with Inpaq WA-P-LB-02-711 and WA-PLB- 02-712 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. This module is approved in
mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with
equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator
to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific
final products may require the submission of a permissive change application, containing appropriate
data demonstrating compliance, or a new application. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either
2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for
complying with the instructions and requirements for each transmitter they choose to integrate into a
host product. The highest reported Body and Simultaneous SAR values are 1.11W/kg and 1.32W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-C05C PC with Inpaq WA-P-LB-02-711 and WA-PLB- 02-712 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.32W/kg respectively.
This change establishes portable category SAR conditions for
the HP model HSN-C05C PC with Inpaq WA-P-LB-02-711 and WA-PLB-
02-712 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.85W/kg and 1.51W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I36C-4 PC with WNC 81EABB15.G44 and 81EABB15.G43 and AWAN AUP6Y-100036 and AUP6Y-100035 and HongBo 260-27376 and 260-27375 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08W/kg and 1.51W/kg respectively.
This change establishes portable category SAR conditions for
the HP model HSN-I36C-4 PC with WNC 81EABB15.G44 and
81EABB15.G43 and AWAN AUP6Y-100036 and AUP6Y-100035 and
HongBo 260-27376 and 260-27375 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each
transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.81W/kg and 1.51W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I36C-4 PC with WNC 81EABB15.G44 and 81EABB15.G43 and AWAN AUP6Y-100036 and AUP6Y-100035 and HongBo 260-27376 and 260-27375 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.32W/kg respectively.
This change establishes portable category SAR conditions for
the HP model HSN-C06C (touch sku) PC with WNC 81ELA415.G18 (Tx1/
Tx2) antennas and HP model HSN-C06C (non-touch sku) PC with WNC
81ELA415.G13 (Tx1/Tx2) antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each
transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.16W/kg and 1.32W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-C06C (touch sku) PC with WNC 81ELA415.G18 (Tx1/ Tx2) antennas and HP model HSN-C06C (non-touch sku) PC with WNC 81ELA415.G13 (Tx1/Tx2) antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 0.29W/kg and 1.32W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-C06C (touch sku) PC with WNC 81ELA415.G18 (Tx1/ Tx2) antennas and HP model HSN-C06C (non-touch sku) PC with WNC 81ELA415.G13 (Tx1/Tx2) antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each
transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.18W/kg and 1.58W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P95F PC with Ethertronics DC33002CL3L (Tx1) & (Tx2) antennas and HongBo DC33002CQ1L (Tx1) & (Tx2) antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.12W/kg and 1.58W/kg respectively.
This change establishes portable category SAR conditions for
the Dell model P95F PC with Ethertronics DC33002CL3L (Tx1) & (Tx2)
antennas and HongBo DC33002CQ1L (Tx1) & (Tx2) antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.16W/kg and 1.58W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P95F PC with Ethertronics DC33002CL3L (Tx1) & (Tx2) antennas and HongBo DC33002CQ1L (Tx1) & (Tx2) antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 0.67W/kg and 1.53W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P94F PC with Ethertronics DC33002CL3L (Tx1) and (Tx2) antennas and HongBo DC33002CQ1L (Tx1) and (Tx2) antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 1.16W/kg respectively.
This change establishes portable category SAR conditions for
the Dell model P97F PC with WNC 025.901NF.0011 (Tx1) and
025.901NG.0011 (Tx2) antennas and HongBo 260-27406(Tx1) and
260-27407 (Tx2) antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as
shown in filings under this FCC ID.
The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 0.69W/kg and 1.16W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P97F PC with WNC 025.901NF.0011 (Tx1) and 025.901NG.0011 (Tx2) antennas and HongBo 260-27406(Tx1) and 260-27407 (Tx2) antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.13W/kg and 1.53W/kg respectively.
This change establishes portable category SAR conditions for
the Dell model P94F PC with Ethertronics DC33002CL3L (Tx1) and (Tx2)
antennas and HongBo DC33002CQ1L (Tx1) and (Tx2) antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each
transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are
0.89W/kg and 1.53W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P94F PC with Ethertronics DC33002CL3L (Tx1) and (Tx2) antennas and HongBo DC33002CQ1L (Tx1) and (Tx2) antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each
transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.74W/kg and 1.16W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P97F PC with WNC 025.901NF.0011 (Tx1) and 025.901NG.0011 (Tx2) antennas and HongBo 260-27406(Tx1) and 260-27407 (Tx2) antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.34W/kg respectively.
This change is to request approval for portable category specific
host notebook PC, Dell model number - P131G, with antenna HongBo part
no 260-24300 (Tx1 and Tx2), Speedwire part no F-0G-FH-6107-001-00
(Tx1 and Tx2) and WNC part no 81ELAS15.G09 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR
testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 0.94W/kg and 1.34W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P131G, with antenna HongBo part no 260-24300 (Tx1 and Tx2), Speedwire part no F-0G-FH-6107-001-00 (Tx1 and Tx2) and WNC part no 81ELAS15.G09 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each
transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.45W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P125G PC with WNC 025.901MY.0001 (Tx1) and 025.901N7.0001 (Tx2) antennas and HongBo 025.901my.0011(Tx1) and 025.901N7.0011 (Tx2) antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 0.91W/kg and 1.45W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P125G PC with WNC 025.901MY.0001 (Tx1) and 025.901N7.0001 (Tx2) antennas and HongBo 025.901my.0011(Tx1) and 025.901N7.0011 (Tx2) antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.45W/kg respectively.
This change establishes portable category SAR conditions for
the Dell model P125G PC with WNC 025.901MY.0001 (Tx1) and
025.901N7.0001 (Tx2) antennas and HongBo 025.901my.0011(Tx1) and
025.901N7.0011 (Tx2) antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each
transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.23W/kg and 1.34W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P131G, with antenna HongBo part no 260-24300 (Tx1 and Tx2), Speedwire part no F-0G-FH-6107-001-00 (Tx1 and Tx2) and WNC part no 81ELAS15.G09 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.50W/kg respectively.
This change is to request approval for portable category specific
host notebook PC, Dell model number - P34S, with antenna HongBo part no
260-24297 (Tx1 and Tx2), Speedwire part no F-0G-FH-6106-001-00 (Tx1
and Tx2) and WNC part no 81ELAS15.G03 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 1.18W/kg and 1.50W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P34S, with antenna HongBo part no 260-24297 (Tx1 and Tx2), Speedwire part no F-0G-FH-6106-001-00 (Tx1 and Tx2) and WNC part no 81ELAS15.G03 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.
Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures.
This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s)
with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation
of this device into specific final products may require the submission of a permissive change application, containing
appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth
modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4
or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for
complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.05W/kg and 1.50W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P34S, with antenna HongBo part no 260-24297 (Tx1 and Tx2), Speedwire part no F-0G-FH-6106-001-00 (Tx1 and Tx2) and WNC part no 81ELAS15.G03 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 0.95W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP850XCJ PC with WNC 81.ELA15.G03 and 81.ELA15.G04 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each
transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.82W/kg and 0.95W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP850XCJ PC with WNC 81.ELA15.G03 and 81.ELA15.G04 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.31W/kg and 0.95W/kg respectively.
This change establishes portable category SAR conditions for
the Samsung model NP850XCJ PC with WNC 81.ELA15.G03 and
81.ELA15.G04 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.58W/kg respectively.
This change is to request approval for portable category specific
host notebook PC, Dell model number - P91F, with antenna HongBo part no
260-24311 (Tx1) and 260-24312 (Tx2), HongBo part no 260-24287 (Tx1)
and 260-24288 (Tx2), Speedwire part no F.0G.FH-6101-006-00 (Tx1) and
F.0G.FH-6101-005-00 (Tx2), Speedwire part no F.0G.FH-6101-002-00
(Tx1) and F.0G-FH-6101-001-00 (Tx2), WNC part no 81ELAS15.G67 (Tx1)
and 81ELAS15.G68 (Tx2) and WNC part no 81ELAS15.G02 (Tx1) and
81ELAS15.G01 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR
testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 0.47W/kg and 1.58W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P91F, with antenna HongBo part no 260-24311 (Tx1) and 260-24312 (Tx2), HongBo part no 260-24287 (Tx1) and 260-24288 (Tx2), Speedwire part no F.0G.FH-6101-006-00 (Tx1) and F.0G.FH-6101-005-00 (Tx2), Speedwire part no F.0G.FH-6101-002-00 (Tx1) and F.0G-FH-6101-001-00 (Tx2), WNC part no 81ELAS15.G67 (Tx1) and 81ELAS15.G68 (Tx2) and WNC part no 81ELAS15.G02 (Tx1) and 81ELAS15.G01 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each
transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are
1.19W/kg and 1.58W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P91F, with antenna HongBo part no 260-24311 (Tx1) and 260-24312 (Tx2), HongBo part no 260-24287 (Tx1) and 260-24288 (Tx2), Speedwire part no F.0G.FH-6101-006-00 (Tx1) and F.0G.FH-6101-005-00 (Tx2), Speedwire part no F.0G.FH-6101-002-00 (Tx1) and F.0G-FH-6101-001-00 (Tx2), WNC part no 81ELAS15.G67 (Tx1) and 81ELAS15.G68 (Tx2) and WNC part no 81ELAS15.G02 (Tx1) and 81ELAS15.G01 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each
transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.86W/kg and 1.33W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P124G PC with WNC 025.901MY.0001 (Tx1) and 025.901N7.0001 (Tx2) antennas and HongBo 025.901my.0011(Tx1) and 025.901N7.0011 (Tx2) antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.23W/kg and 1.33W/kg respectively.
This change establishes portable category SAR conditions for
the Dell model P124G PC with WNC 025.901MY.0001 (Tx1) and
025.901N7.0001 (Tx2) antennas and HongBo 025.901my.0011(Tx1) and
025.901N7.0011 (Tx2) antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 1.20W/kg and 1.33W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P124G PC with WNC 025.901MY.0001 (Tx1) and 025.901N7.0001 (Tx2) antennas and HongBo 025.901my.0011(Tx1) and 025.901N7.0011 (Tx2) antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.13W/kg and 1.48W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model TP00107B PC with Auden 025.901FT.0011 - Tx1 and 025.901LJ.0011 - Tx2 antennas, WNC 025.901FR.0001 - Tx1 and 025.901LI.0001 - Tx2 antennas and WNC 025.901FT.0001 - Tx1 and 025.901LJ.0001 - Tx2 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each
transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are
1.19W/kg and 1.48W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model TP00107B PC with Auden 025.901FT.0011 - Tx1 and 025.901LJ.0011 - Tx2 antennas, WNC 025.901FR.0001 - Tx1 and 025.901LI.0001 - Tx2 antennas and WNC 025.901FT.0001 - Tx1 and 025.901LJ.0001 - Tx2 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 1.02W/kg and 1.48W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model TP00107B PC with Auden 025.901FT.0011 - Tx1 and 025.901LJ.0011 - Tx2 antennas, WNC 025.901FR.0001 - Tx1 and 025.901LI.0001 - Tx2 antennas and WNC 025.901FT.0001 - Tx1 and 025.901LJ.0001 - Tx2 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each
transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.15W/kg and 1.55W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP730QCJ PC with Luxshare BA42-00677A and BA42-00678A antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.57W/kg respectively.
This change establishes portable category SAR conditions for
the HP model TPN-Q237 PC with Inpaq DQ60PLBLB33 Tx1/Tx2 and
DQ60PLBLB34 Tx1/Tx2 antennas. Hightek DQ60ACQD061 Tx1/Tx2
and DQ60ACQD062 Tx1/Tx2 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 0.99W/kg and 1.57W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-Q237 PC with Inpaq DQ60PLBLB33 Tx1/Tx2 and DQ60PLBLB34 Tx1/Tx2 antennas. Hightek DQ60ACQD061 Tx1/Tx2 and DQ60ACQD062 Tx1/Tx2 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. This module is approved in
mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with
equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator
to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific
final products may require the submission of a permissive change application, containing appropriate
data demonstrating compliance, or a new application. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either
2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for
complying with the instructions and requirements for each transmitter they choose to integrate into a
host product. The highest reported Body and Simultaneous SAR values are 0.92W/kg and 1.55W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP730QCJ PC with Luxshare BA42-00677A and BA42-00678A antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with CC
multi-transmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and
installers must be provided with transmitter operating conditions for satisfying RF exposure
compliance. The highest reported Body and Simultaneous SAR values are 0.14W/kg and 1.55W/kg respectively.
This change establishes portable category SAR conditions for
the Samsung model NP730QCJ PC with Luxshare BA42-00677A and
BA42-00678A antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each
transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are
1.20W/kg and 1.57W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-Q237 PC with Inpaq DQ60PLBLB33 Tx1/Tx2 and DQ60PLBLB34 Tx1/Tx2 antennas. Hightek DQ60ACQD061 Tx1/Tx2 and DQ60ACQD062 Tx1/Tx2 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.
Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures.
This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to
determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application,
containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled
for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host
product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively.
This change is to provide updated labeling exhibits for this filing. Due to the module very small size (12x16mm overall) in order to put the labeling on the device itself it is so small (<4pt) it is not legible without magnification. For this reason the FCC ID information is placed into the User Guide information.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.55W/kg respectively.
This change is to provide updated labeling exhibits for this filing. Due to the module very small size (12x16mm overall) in order to put the labeling on the device itself it is so small (<4pt) it is not legible without magnification. For this reason the FCC ID information is placed into the User Guide information.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively.
This change is to provide updated labeling exhibits for this
filing. Due to the module very small size (12x16mm overall) in order to put
the labeling on the device itself it is so small (<4pt) it is not legible without
magnification. For this reason the FCC ID information is placed into the
User Guide information.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge
channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with
the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must
coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data demonstrating
compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host
integrator is responsible for complying with the instructions and requirements for each transmitter they choose to
integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.39W/kg and 1.60W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P117G PC (black cover and white cover) with WNC 81ELAS15.G30 and 81ELAS15.G29 antennas, Speedwire F.0G.FH-6100-002-00 and F.0G.FH-6100-001-00 antennas and HongBo 260-24285 and 260-24286 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product
procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or
similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM
integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must
be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose
to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.86W/kg and 1.60W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P117G PC (black cover and white cover) with WNC 81ELAS15.G30 and 81ELAS15.G29 antennas, Speedwire F.0G.FH-6100-002-00 and F.0G.FH-6100-001-00 antennas and HongBo 260-24285 and 260-24286 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with CC
multi-transmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and
installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.13W/kg and 1.60W/kg respectively.
This change establishes portable category SAR conditions for the Dell model
P117G PC (black cover and white cover) with WNC 81ELAS15.G30 and 81ELAS15.G29 antennas, Speedwire F.0G.FH-6100-002-00 and F.0G.FH-6100-001-00 antennas and HongBo 260-24285 and 260-24286 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Power output has been reduced at the upper bandedge channels
as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. This module is approved in
mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with
equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator
to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific
final products may require the submission of a permissive change application, containing appropriate
data demonstrating compliance, or a new application. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either
2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for
complying with the instructions and requirements for each transmitter they choose to integrate into a
host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.45W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model TP00110B PC with AMP LXA432-16-000-C and LXA433-16-000-C antennas and Speedwire F.0G.ZV-0008-007-00 and F.0G.ZV-0008-008-00 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.13W/kg and 1.45W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model TP00110B PC with AMP LXA432-16-000-C and LXA433-16-000-C antennas and Speedwire F.0G.ZV-0008-007-00 and F.0G.ZV-0008-008-00 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with
the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must
coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data demonstrating
compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in
this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a
host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and1.45W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model TP00110B PC with AMP LXA432-16-000-C and LXA433-16-000-C antennas and Speedwire F.0G.ZV-0008-007-00 and F.0G.ZV-0008-008-00 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with
the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must
coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data demonstrating
compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in
this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a
host product. The highest reported Body and Simultaneous SAR values are 1.24W/kg and1.55W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model XE930QCA PC with Galtronics 02112140-07031 and 02112140-07032 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.31W/kg and 1.55W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model XE930QCA PC with Galtronics 02112140-07031 and 02112140-07032 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Power output has been reduced at the upper bandedge channels
as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. This module is approved in
mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with
equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator
to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific
final products may require the submission of a permissive change application, containing appropriate
data demonstrating compliance, or a new application. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either
2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for
complying with the instructions and requirements for each transmitter they choose to integrate into a
host product. The highest reported Body and Simultaneous SAR values are 1.03W/kg and 1.55W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model XE930QCA PC with Galtronics 02112140-07031 and 02112140-07032 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with
the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must
coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data demonstrating
compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in
this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a
host product. The highest reported Body and Simultaneous SAR values are 1.15W/kg and1.29W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP930XCJ PC with WNC 81.XBLA15.G03 and 81.XBLA15.G03 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.14W/kg and 1.29W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP930XCJ PC with WNC 81.XBLA15.G03 and 81.XBLA15.G03 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Power output has been reduced at the upper bandedge channels
as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. This module is approved in
mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with
equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator
to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific
final products may require the submission of a permissive change application, containing appropriate
data demonstrating compliance, or a new application. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either
2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for
complying with the instructions and requirements for each transmitter they choose to integrate into a
host product. The highest reported Body and Simultaneous SAR values are 0.51W/kg and 1.29W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP930XCJ PC with WNC 81.XBLA15.G03 and 81.XBLA15.G03 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.25W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP950XCJ PC with WNC 81.XBLA15.G03 and 81.XBLA15.G03 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with
the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must
coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data demonstrating
compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in
this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a
host product. The highest reported Body and Simultaneous SAR values are 1.16W/kg and1.25W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP950XCJ PC with WNC 81.XBLA15.G03 and 81.XBLA15.G03 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Power output has been reduced at the upper bandedge channels
as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. This module is approved in
mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with
equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator
to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific
final products may require the submission of a permissive change application, containing appropriate
data demonstrating compliance, or a new application. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either
2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for
complying with the instructions and requirements for each transmitter they choose to integrate into a
host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.25W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP950XCJ PC with WNC 81.XBLA15.G03 and 81.XBLA15.G03 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.20W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP950QCG PC with WNC 81.ELA15.G19 and 81.ELA15.G20 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with
the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must
coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data demonstrating
compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in
this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a
host product. The highest reported Body and Simultaneous SAR values are 1.20W/kg and 1.20W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP950QCG PC with WNC 81.ELA15.G19 and 81.ELA15.G20 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Power output has been reduced at the upper bandedge channels
as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. This module is approved in
mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with
equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator
to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific
final products may require the submission of a permissive change application, containing appropriate
data demonstrating compliance, or a new application. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either
2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for
complying with the instructions and requirements for each transmitter they choose to integrate into a
host product. The highest reported Body and Simultaneous SAR values are 0.95W/kg and 1.20W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP950QCG PC with WNC 81.ELA15.G19 and 81.ELA15.G20 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.14W/kg and 1.45W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP930QCG PC with WNC 81.ELA15.G19 and 81.ELA15.G20 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with
the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must
coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data demonstrating
compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in
this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a
host product. The highest reported Body and Simultaneous SAR values are 1.36W/kg and1.45W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP930QCG PC with WNC 81.ELA15.G19 and 81.ELA15.G20 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Power output has been reduced at the upper bandedge channels
as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. This module is approved in
mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with
equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator
to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific
final products may require the submission of a permissive change application, containing appropriate
data demonstrating compliance, or a new application. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either
2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for
complying with the instructions and requirements for each transmitter they choose to integrate into a
host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.45W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP930QCG PC with WNC 81.ELA15.G19 and 81.ELA15.G20 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Power output has been reduced at the upper bandedge channels
as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. This module is approved in
mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with
equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator
to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.25W/kg and 1.60W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo IdeaPad S940-14IIL, with antenna WNC part no 025.901KU.0001 (Tx1) and 025.901KV.0001 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.01W/kg and
1.60W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo IdeaPad S940-14IIL, with antenna WNC part no 025.901KU.0001 (Tx1) and 025.901KV.0001 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with
the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate
with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance, or a new
application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as
described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter
operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The highest
reported Body and Simultaneous SAR values are 0.84W/kg and1.60W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo IdeaPad S940-14IIL, with antenna WNC part no 025.901KU.0001 (Tx1) and 025.901KV.0001 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.50W/kg and 0.96W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P115G, with antenna HongBo part no 260-24281 (Tx1) and 260-24282 (Tx2) and WNC part no 81ELAR15.G07 (Tx1) and 81EAA915.G11 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar ntenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to
determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 0.96W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P115G, with antenna HongBo part no 260-24281 (Tx1) and 260-24282 (Tx2) and WNC part no 81ELAR15.G07 (Tx1) and 81EAA915.G11 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.01W/kg and 0.96W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P115G, with antenna HongBo part no 260-24281 (Tx1) and 260-24282 (Tx2) and WNC part no 81ELAR15.G07 (Tx1) and 81EAA915.G11 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar ntenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to
determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.22W/kg and 1.32W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Yoga C940-14IIL, with antenna Awan part no AML6Y-200008 (Tx1 and Tx2) and Speedwire part no F-0G-JV-0093-000-00 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 1.13W/kg and 1.32W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Yoga C940-14IIL, with antenna Awan part no AML6Y-200008 (Tx1 and Tx2) and Speedwire part no F-0G-JV-0093-000-00 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and 1.32W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Yoga C940-14IIL, with antenna Awan part no AML6Y-200008 (Tx1 and Tx2) and Speedwire part no F-0G-JV-0093-000-00 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar ntenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to
determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.65W/kg and 1.37W/kg respectively.
To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.37W/kg respectively.
To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.44W/kg and1.37W/kg respectively.
To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 0.98W/kg respectively.
To establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 0.98W/kg respectively.
To establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar ntenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to
determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.53W/kg and 0.98W/kg respectively.
To establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.55W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
Intel Corporation S.A.S.
|
various
|
SPORTON International Inc.
|
various
|
KCTL INC
|
various
|
Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
|
various
|
DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
|
various
|
Name |
N******** A****
|
various
|
A****** C********
|
various
|
S******** L******
|
various
|
E**** L********
|
various
|
M**** L****
|
various
|
Telephone Number |
00334********
|
various
|
+886-******** Extension:
|
various
|
+82-3********
|
various
|
+886-********
|
various
|
00334********
|
various
|
+886-******** Extension:
|
various
|
Fax Number |
+886-********
|
various
|
00334********
|
various
|
+886-********
|
various
|
E-mail |
n******@intel.com
|
various
|
a******@sporton.com.tw
|
various
|
s******@kctl.co.kr
|
various
|
e******@tw.bureauveritas.com
|
various
|
m******@dekra.com
|
|