Intel Wi-Fi 6 AX203 AX203D2

Intel Corporation

Application Exhibits

Users Manuals Internal Photos External Photos ID Label/Location Infos

frequency equipment class purpose
1 2023-09-13 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX Class II permissive change or modification of presently authorized equipment
2 2023-01-11 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX Class II Permissive Change
3 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
4 2022-10-06 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
5 2022-09-09 2422 ~ 2462 DTS - Digital Transmission System Class II permissive change or modification of presently authorized equipment
6 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
7 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
8 2022-09-08 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II Permissive Change
9 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
10 2422 ~ 2462 DTS - Digital Transmission System
11 2022-08-25 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
12 2422 ~ 2462 DTS - Digital Transmission System
13 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
14 2021-01-29 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX Original Equipment
15 2422 ~ 2462 DTS - Digital Transmission System
16 JBP - Part 15 Class B Computing Device Peripheral
17 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
app s submitted / available
various Intel WiFi Adapter Information Guide Draft 0928 Users Manual pdf 3.22 MiB September 30 2022 / October 06 2022
various TempConfidential 11 EN Intel WiFi Adapter Information Guide Draft Rev05 Users Manual pdf 3.40 MiB September 08 2023 / March 11 2024 delayed release
various User Manual Users Manual pdf 2.67 MiB January 11 2023
various Internal Photos pdf September 08 2023 / September 13 2023
various Antenna Photos External Photos pdf 277.35 KiB September 30 2022 / October 06 2022
various External Photos External Photos pdf 163.84 KiB January 29 2021 / July 28 2021 delayed release
various Label and Location ID Label/Location Info pdf 117.04 KiB January 29 2021
various Labels and Locations ID Label/Location Info pdf 1.57 MiB September 09 2022
various 220915-14.TR02-FCC MPE WLAN UNII4 AX203D2W Rev01 RF Exposure Info pdf 374.87 KiB September 08 2023 / September 13 2023
various 220915-14.TR04-FCC RSE WLAN UNII4 AX203D2W Dipole Rev01 Test Report pdf 483.83 KiB September 08 2023 / September 13 2023
various 220915-14.TR04-FCC RSE WLAN UNII4 AX203D2W Dipole Rev01 Photographs Test Setup Photos pdf 514.33 KiB September 08 2023 / September 13 2023
various Attestation Statements pdf September 08 2023 / September 13 2023
various Attestation Statements pdf September 08 2023 / September 13 2023
various Test Report pdf September 08 2023 / September 13 2023
various FCC Confidentiality Letter Cover Letter(s) pdf 577.91 KiB September 08 2023 / September 13 2023
various FCC Modular Approval Letter Cover Letter(s) pdf 971.25 KiB September 08 2023 / September 13 2023
various FCC Permisive Change Letter Cover Letter(s) pdf 1.09 MiB September 08 2023 / September 13 2023
various Modular Letter Cover Letter(s) pdf 241.85 KiB January 11 2023
various Premissive Change letter Cover Letter(s) pdf 237.83 KiB January 11 2023
various RF Exposure SAR RF Exposure Info pdf 1.04 MiB January 11 2023
various RF Exposure SAR Calibrations RF Exposure Info pdf 1.57 MiB January 11 2023
various Test Report WRF 5.9 Test Report pdf 1.25 MiB January 11 2023
various Test Setup Photos SAR Test Setup Photos pdf 478.12 KiB January 11 2023
various 210209-01.TR46 FCC WLAN UNII4 JnP1216 AX203D2W Rev01 Part1 Test Report pdf 4.14 MiB September 30 2022 / October 06 2022
various 210209-01.TR46 FCC WLAN UNII4 JnP1216 AX203D2W Rev01 Part2 Test Report pdf 2.67 MiB September 30 2022 / October 06 2022
various 210209-01.TR46 FCC WLAN UNII4 JnP1216 AX203D2W Rev01 Photographs Test Setup Photos pdf 866.62 KiB September 30 2022 / October 06 2022
various 210209-01.TR53 FCC UNII-4 SAR AX203D2W RF Exposure Info pdf 1004.84 KiB September 30 2022 / October 06 2022
various 210209-01.TR53 FCC UNII-4 SAR AX203D2W-Annex E RF Exposure Info pdf 2.12 MiB September 30 2022 / October 06 2022
various 210209-01.TR53 FCC UNII-4 SAR AX203D2W-Annex F Test Setup Photos pdf 532.79 KiB September 30 2022 / October 06 2022
various C2PC letter AX203D2W Cover Letter(s) pdf 1.80 MiB September 30 2022 / October 06 2022
various Passive-Scan-Attestation-AX203D2W Rev01 Attestation Statements pdf 169.58 KiB September 30 2022 / October 06 2022
various Software-Security-Letter AX203D2W Attestation Statements pdf 1.24 MiB September 30 2022 / October 06 2022
various RF Exposure SAR Calibration RF Exposure Info pdf 4.03 MiB September 09 2022
various Software Security Letter Cover Letter(s) pdf 289.51 KiB September 09 2022
various Test Report Antenna Data Test Report pdf 718.04 KiB September 09 2022
various Passive Scan Attestation Attestation Statements pdf 216.94 KiB September 09 2022
various RF Exposure SAR Report RF Exposure Info pdf 1.50 MiB September 09 2022
various RF Exposure SAR Report Calibration RF Exposure Info pdf 3.35 MiB September 08 2022
various Description Antenna Weison Dipole Operational Description pdf 2.47 MiB August 25 2022
various RF Exposure MPE Report RF Exposure Info pdf 378.77 KiB August 25 2022
various Test Report MPE Evaluation Test Report pdf 323.93 KiB August 25 2022
various Test Report RSE Test Report pdf 578.54 KiB August 25 2022
various Test Setup Photos RSE Test Setup Photos pdf 537.47 KiB August 25 2022
various Block Diagram Block Diagram pdf January 29 2021 confidential
various Cofidentiality Letter Cover Letter(s) pdf 78.53 KiB January 29 2021
various Description Antenna SkyCross Operational Description pdf January 29 2021 confidential
various Description Hardware Operational Description pdf January 29 2021 confidential
various Modular Approval Letter Cover Letter(s) pdf 69.80 KiB January 29 2021
various Schematics Schematics pdf January 29 2021 confidential
various Test Report DFS Test Report pdf 494.32 KiB January 29 2021
various Test Report UNII 1 and 2A Part 1 Test Report pdf 3.32 MiB January 29 2021
various Test Report UNII 1 and 2A Part 2 Test Report pdf 3.21 MiB January 29 2021
various Test Report UNII 2C Part 1 Test Report pdf 3.64 MiB January 29 2021
various Test Report UNII 2C Part 2 Test Report pdf 2.90 MiB January 29 2021
various Test Report UNII 3 Part 1 Test Report pdf 3.69 MiB January 29 2021
various Test Report UNII 3 Part 2 Test Report pdf 2.30 MiB January 29 2021
various Test Setup Photos DFS Test Setup Photos pdf 220.67 KiB January 29 2021 / July 28 2021 delayed release
various Test Setup Photos UNII 1 2A Test Setup Photos pdf 1.09 MiB January 29 2021 / July 28 2021 delayed release
various Test Setup Photos UNII 2C Test Setup Photos pdf 1.03 MiB January 29 2021 / July 28 2021 delayed release
various Test Setup Photos UNII 3 Test Setup Photos pdf 1.03 MiB January 29 2021 / July 28 2021 delayed release
various Test Report DTS and BLE Part 1 Test Report pdf 3.49 MiB January 29 2021
various Test Report DTS and BLE Part 2 Test Report pdf 4.23 MiB January 29 2021
various Test Report DTS and BLE Part 3 Test Report pdf 2.44 MiB January 29 2021
various Test Setup Photos DTS BLE Test Setup Photos pdf 1.09 MiB January 29 2021 / July 28 2021 delayed release
various Test Report JBP Test Report pdf 2.64 MiB January 29 2021
various Test Setup Photos JBP Test Setup Photos pdf 381.71 KiB January 29 2021 / July 28 2021 delayed release
various Description Bluetooth Operational Description pdf January 29 2021 confidential
various Test Report Bluetooth Test Report pdf 3.64 MiB January 29 2021
various Test Setup Photos Bluetooth Test Setup Photos pdf 1.09 MiB January 29 2021 / July 28 2021 delayed release

Application Forms

app s Applicant Information
various Effective 2023-09-13
various 2023-01-11
various 2022-10-06
various 2022-09-09
various 2022-09-08
various 2022-08-25
various 2021-01-29
various Applicant's complete, legal business name Intel Corporation
various FCC Registration Number (FRN) 0008035131
various Physical Address 100 Center Point Circle Suite 200
various 425 rue de Goa
various 100 Center Point Circle
various Antibes, N/A 06600
various Columbia, SC
various Columbia, South Carolina 29210
various Columbia
various France
various United States
app s TCB Information
various TCB Application Email Address h******@acbcert.com
various h******@ACBcert.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code PD9
various Equipment Product Code AX203D2
app s Person at the applicant's address to receive grant or for contact
various Name B****** L******
various S******** C**** H******
various Title Regulatory Engineer
various Product Regulations Engineer
various Telephone Number 04930********
various 803-3********
various Fax Number 04930********
various 803-2********
various E-mail b******@intel.com
various s******@intel.com
app s Technical Contact
various Firm Name Intel Corporation
various Intel Mobile Communications
various Name B**** L******
various S******** C**** H******
various S**** H********
various Physical Address 425 rue de Goa
various 100 Center Point Circle
various Antibes, 06600
various Columbia, 29212
various Columbia, South Carolina 29210
various France
various United States
various Telephone Number 04930********
various 80321********
various 80331********
various E-mail b******@intel.com
various s******@intel.com
app s Non Technical Contact
various Firm Name Intel Corporation
various Name B****** L******
various G**** C********
various Physical Address 425 rue de Goa
various Antibes, 06600
various France
various Telephone Number 04930********
various +3349********
various E-mail b******@intel.com
various g******@intel.com
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)03/11/2024
various03/08/2023
various03/07/2023
various02/21/2023
various07/28/2021
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassNII - Unlicensed National Information Infrastructure TX
variousDTS - Digital Transmission System
variousDSS - Part 15 Spread Spectrum Transmitter
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Intel Wi-Fi 6 AX203
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?Yes
variousNo
variousModular Equipment TypeSingle Modular Approval
variousDoes not apply
variousPurpose / Application is forClass II permissive change or modification of presently authorized equipment
variousClass II Permissive Change
variousOriginal Equipment
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, and 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations. Addition of a new antenna and antenna type for the UNII-4 Band. (Antenna type: Dipole Antenna Wieson Part no ARY121-0009-002-H0).
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This change to establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna for UNII-1 to UNII-3 bands, type PIFA. The highest reported Body and Simultaneous SAR values are 0.80W/kg and 1.58W/kg respectively for this configuration. This module is approved in portable/mobile configurations with WRF Lab antenna WRF-BR-PIFA-V3.2 for UNII-4 Band, type PIFA. The highest reported Body and Simultaneous SAR values are 0.80W/kg and 1.57W/kg respectively for this configuration. SAR testing was performed to demonstrate RF compliance.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This change to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna for UNII-1 to UNII-3 bands, type PIFA. The highest reported Body and Simultaneous SAR values are 0.50W/kg and 0.86W/kg respectively for this configuration. This module is approved in portable/mobile configurations with WRF Lab antenna WRF-BR-PIFA-V3.2 for UNII-4 Band, type PIFA. The highest reported Body and Simultaneous SAR values are 0.80W/kg and 1.59W/kg respectively for this configuration. SAR testing was performed to demonstrate RF compliance.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna for UNII-1 to UNII-3 bands, type PIFA at 16 mm minimum test separation distance. The highest reported Body and Simultaneous SAR values are 0.80W/kg and 1.58W/kg respectively for this configuration. This module is approved in portable/mobile configurations with WRF Lab antenna WRF-BR-PIFA-V3.2 for UNII-4 Band, type PIFA at 30mm minimum test separation distance. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.26W/kg respectively for this configuration. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.50W/kg and 1.41W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and 1.41W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.80W/kg and 1.41W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.15W/kg and 0.86W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.50W/kg and 0.86W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.48W/kg and 0.86W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This filing meets requirements of KDB447498 and can be used in mobile configurations. Addition an new antenna, antenna type is different with the original application. (Antenna type: Wieson Dipole Antenna). RF Exposure testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets requirements of KDB447498 and can be used in mobile configurations. Addition an new antenna, antenna type is different with the original application. (Antenna type: Wieson Dipole Antenna). RF Exposure testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets requirements of KDB447498 and can be used in mobile configurations. Addition an new antenna, antenna type is different with the original application. (Antenna type: Wieson Dipole Antenna). RF Exposure testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.80W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 16mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 16mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 16mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name Intel Corporation S.A.S.
various Name N******** A********
various Telephone Number 00334********
various 00334********
various Fax Number 00334********
various E-mail n******@intel.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15E CC MO 5180 5240 0.142
1 2 15E CC MO 5190 5230 0.141
1 3 15E CC MO 5210 5210 0.098
1 4 15E CC MO ND 5260 5320 0.155
1 5 15E CC MO ND 5270 5310 0.123
1 6 15E CC MO ND 5290 5290 0.077
1 7 15E CC MO ND 5500 5700 0.147
1 8 15E CC MO ND 5510 5670 0.141
1 9 15E CC MO ND 5710 5710 0.136
1 1 15E CC MO ND 5720 5720 0.116
1 11 15E CC MO ND 5530 5690 0.149
1 12 15E CC MO 5745 5825 0.149
1 13 15E CC MO 5755 5795 0.13
1 14 15E CC MO 5775 5775 0.126
1 15 15E CC MO 5845 5885 0.3
1 16 15E CC MO 5835 5875 0.399
1 17 15E CC MO 5855 5855 0.284
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15E CC MO 5180 5240 0.142
2 2 15E CC MO 5190 5230 0.141
2 3 15E CC MO 5210 5210 0.098
2 4 15E CC MO ND 5260 5320 0.155
2 5 15E CC MO ND 5270 5310 0.123
2 6 15E CC MO ND 5290 5290 0.077
2 7 15E CC MO ND 5500 5700 0.147
2 8 15E CC MO ND 5510 5670 0.141
2 9 15E CC MO ND 5710 5710 0.136
2 1 15E CC MO ND 5720 5720 0.116
2 11 15E CC MO ND 5530 5690 0.149
2 12 15E CC MO 5745 5825 0.149
2 13 15E CC MO 5755 5795 0.13
2 14 15E CC MO 5775 5775 0.126
2 15 15E CC MO 5845 5885 0.3
2 16 15E CC MO 5835 5875 0.399
2 17 15E CC MO 5855 5855 0.284
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15E CC MO 5180 5240 0.142
3 2 15E CC MO 5190 5230 0.141
3 3 15E CC MO 5210 5210 0.098
3 4 15E CC MO ND 5260 5320 0.155
3 5 15E CC MO ND 5270 5310 0.123
3 6 15E CC MO ND 5290 5290 0.077
3 7 15E CC MO ND 5500 5700 0.147
3 8 15E CC MO ND 5510 5670 0.141
3 9 15E CC MO ND 5710 5710 0.136
3 1 15E CC MO ND 5720 5720 0.116
3 11 15E CC MO ND 5530 5690 0.149
3 12 15E CC MO 5745 5825 0.149
3 13 15E CC MO 5755 5795 0.13
3 14 15E CC MO 5775 5775 0.126
3 15 15E CC MO 5845 5885 0.3
3 16 15E CC MO 5835 5875 0.399
3 17 15E CC MO 5855 5855 0.284
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15E CC MO 5180 5240 0.142
4 2 15E CC MO 5190 5230 0.141
4 3 15E CC MO 5210 5210 0.098
4 4 15E CC MO ND 5260 5320 0.155
4 5 15E CC MO ND 5270 5310 0.123
4 6 15E CC MO ND 5290 5290 0.077
4 7 15E CC MO ND 5500 5700 0.147
4 8 15E CC MO ND 5510 5670 0.141
4 9 15E CC MO ND 5710 5710 0.136
4 1 15E CC MO ND 5720 5720 0.116
4 11 15E CC MO ND 5530 5690 0.149
4 12 15E CC MO 5745 5825 0.149
4 13 15E CC MO 5755 5795 0.13
4 14 15E CC MO 5775 5775 0.126
4 15 15E CC MO 5845 5885 0.3
4 16 15E CC MO 5835 5875 0.399
4 17 15E CC MO 5855 5855 0.284
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15C CC 2402 2480 0.007
5 2 15C CC MO 2412 2472 0.889
5 3 15C CC MO 2422 2462 0.474
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15E CC MO 5180 5240 0.142
7 2 15E CC MO 5190 5230 0.141
7 3 15E CC MO 5210 5210 0.098
7 4 15E CC MO ND 5260 5320 0.155
7 5 15E CC MO ND 5270 5310 0.123
7 6 15E CC MO ND 5290 5290 0.077
7 7 15E CC MO ND 5500 5700 0.147
7 8 15E CC MO ND 5510 5670 0.141
7 9 15E CC MO ND 5710 5710 0.136
7 1 15E CC MO ND 5720 5720 0.116
7 11 15E CC MO ND 5530 5690 0.149
7 12 15E CC MO 5745 5825 0.149
7 13 15E CC MO 5755 5795 0.13
7 14 15E CC MO 5775 5775 0.126
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15E CC MO 5180 5240 0.142
9 2 15E CC MO 5190 5230 0.141
9 3 15E CC MO 5210 5210 0.098
9 4 15E CC MO ND 5260 5320 0.155
9 5 15E CC MO ND 5270 5310 0.123
9 6 15E CC MO ND 5290 5290 0.077
9 7 15E CC MO ND 5500 5700 0.147
9 8 15E CC MO ND 5510 5670 0.141
9 9 15E CC MO ND 5710 5710 0.136
9 1 15E CC MO ND 5720 5720 0.116
9 11 15E CC MO ND 5530 5690 0.149
9 12 15E CC MO 5745 5825 0.149
9 13 15E CC MO 5755 5795 0.13
9 14 15E CC MO 5775 5775 0.126
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15C CC 2402 2480 0.007
10 2 15C CC MO 2412 2472 0.889
10 3 15C CC MO 2422 2462 0.474
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15C CC 2402 2480 0.007
12 2 15C CC MO 2412 2472 0.889
12 3 15C CC MO 2422 2462 0.474
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15E CC MO 5180 5240 0.142
13 2 15E CC MO 5190 5230 0.141
13 3 15E CC MO 5210 5210 0.098
13 4 15E CC MO ND 5260 5320 0.155
13 5 15E CC MO ND 5270 5310 0.123
13 6 15E CC MO ND 5290 5290 0.077
13 7 15E CC MO ND 5500 5700 0.147
13 8 15E CC MO ND 5510 5670 0.141
13 9 15E CC MO ND 5710 5710 0.136
13 1 15E CC MO ND 5720 5720 0.116
13 11 15E CC MO ND 5530 5690 0.149
13 12 15E CC MO 5745 5825 0.149
13 13 15E CC MO 5755 5795 0.13
13 14 15E CC MO 5775 5775 0.126
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15E CC MO 5180 5240 0.142
14 2 15E CC MO 5190 5230 0.141
14 3 15E CC MO 5210 5210 0.098
14 4 15E CC MO ND 5260 5320 0.155
14 5 15E CC MO ND 5270 5310 0.123
14 6 15E CC MO ND 5290 5290 0.077
14 7 15E CC MO ND 5500 5700 0.147
14 8 15E CC MO ND 5510 5670 0.141
14 9 15E CC MO ND 5710 5710 0.136
14 1 15E CC MO ND 5720 5720 0.116
14 11 15E CC MO ND 5530 5690 0.149
14 12 15E CC MO 5745 5825 0.149
14 13 15E CC MO 5755 5795 0.13
14 14 15E CC MO 5775 5775 0.126
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15C CC 2402 2480 0.007
15 2 15C CC MO 2412 2472 0.889
15 3 15C CC MO 2422 2462 0.474
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15B CC
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15C CC 2402.00000000 2480.00000000 0.0110000

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC