|
app
s
|
Applicant Information
|
|
|
various
|
Effective |
2024-03-08
|
|
various
|
2024-03-07
|
|
various
|
2024-02-08
|
|
various
|
2024-02-07
|
|
various
|
2024-01-30
|
|
various
|
2024-01-04
|
|
various
|
2023-12-22
|
|
various
|
2023-12-11
|
|
various
|
2023-12-06
|
|
various
|
2023-12-01
|
|
various
|
2023-11-28
|
|
various
|
2023-11-27
|
|
various
|
2023-11-24
|
|
various
|
2023-11-15
|
|
various
|
2023-11-14
|
|
various
|
2023-11-06
|
|
various
|
2023-05-24
|
|
various
|
2023-05-22
|
|
various
|
2023-04-14
|
|
various
|
2023-04-06
|
|
various
|
2023-03-30
|
|
various
|
2023-03-22
|
|
various
|
2023-03-17
|
|
various
|
2023-03-14
|
|
various
|
2023-03-10
|
|
various
|
2023-03-09
|
|
various
|
2023-03-07
|
|
various
|
2023-03-04
|
|
various
|
2023-03-02
|
|
various
|
2023-03-01
|
|
various
|
2023-02-22
|
|
various
|
2023-01-03
|
|
various
|
2022-12-27
|
|
various
|
2022-12-20
|
|
various
|
2022-12-16
|
|
various
|
2022-11-18
|
|
various
|
2022-09-26
|
|
various
|
2022-09-02
|
|
various
|
2022-08-30
|
|
various
|
2022-08-18
|
|
various
|
2022-07-14
|
|
various
|
2022-05-31
|
|
various
|
2022-05-23
|
|
various
|
2022-05-20
|
|
various
|
2022-05-19
|
|
various
|
2022-05-05
|
|
various
|
2022-04-21
|
|
various
|
2022-04-20
|
|
various
|
2022-03-30
|
|
various
|
2022-03-28
|
|
various
|
2022-03-15
|
|
various
|
2022-03-08
|
|
various
|
2022-03-03
|
|
various
|
2022-02-17
|
|
various
|
2022-01-20
|
|
various
|
2022-01-12
|
|
various
|
2022-01-11
|
|
various
|
2022-01-07
|
|
various
|
2022-01-05
|
|
various
|
2021-11-29
|
|
various
|
2021-09-13
|
|
various
|
2021-09-02
|
|
various
|
2021-07-02
|
|
various
|
2021-06-29
|
|
various
|
2021-04-26
|
|
various
|
2021-02-26
|
|
various
|
Applicant's complete, legal business name |
Intel Corporation
|
|
various
|
FCC Registration Number (FRN) |
0033159344
|
|
various
|
0008035131
|
|
various
|
0008033151
|
|
various
|
Physical Address |
425 rue de Goa Le Cargo B6
|
|
various
|
100 Center Point Circle Suite 200
|
|
various
|
425 rue de Goa
|
|
various
|
100 Center Point Circle
|
|
various
|
Antibes, N/A 06600
|
|
various
|
Antibes, N/A
|
|
various
|
Columbia, South Carolina 29210
|
|
various
|
Columbia, SC
|
|
various
|
France
|
|
various
|
United States
|
|
|
app
s
|
TCB Information
|
|
various
|
TCB Application Email Address |
h******@acbcert.com
|
|
various
|
Q******@sporton-usa.com
|
|
various
|
M******@sporton-usa.com
|
|
various
|
K******@sporton-usa.com
|
|
various
|
b******@intel.com
|
|
various
|
K******@sporton-usa.com
|
|
various
|
h******@ACBcert.com
|
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
various
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
|
app
s
|
FCC ID
|
|
various
|
Grantee Code |
PD9
|
|
various
|
Equipment Product Code |
AX211D2
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
various
|
Name |
B**** L****
|
|
various
|
S******** C******** H********
|
|
various
|
Title |
Regulatory Engineer
|
|
various
|
Product Regulations Engineer
|
|
various
|
Telephone Number |
04930********
|
|
various
|
803-3********
|
|
various
|
Fax Number |
04930********
|
|
various
|
803-2********
|
|
various
|
E-mail |
b******@intel.com
|
|
various
|
s******@intel.com
|
|
|
app
s
|
Technical Contact
|
|
various
|
Firm Name |
Intel Corporation
|
|
various
|
Intel Mobile Communications
|
|
various
|
Name |
B**** L******
|
|
various
|
S**** C****** H******
|
|
various
|
S******** H****
|
|
various
|
S******** C******** H********
|
|
various
|
Physical Address |
425 rue de Goa
|
|
various
|
100 Center Point Circle
|
|
various
|
100 center Point Circle
|
|
various
|
100 Center Point Circle Suite 200
|
|
various
|
Antibes, 06600
|
|
various
|
Columbia, 29212
|
|
various
|
Columbia, 29210
|
|
various
|
Columbia, South Carolina 29210
|
|
various
|
France
|
|
various
|
United States
|
|
various
|
Telephone Number |
04930********
|
|
various
|
80321********
|
|
various
|
80321********
|
|
various
|
80331********
|
|
various
|
E-mail |
b******@intel.com
|
|
various
|
s******@intel.com
|
|
various
|
g******@intel.com
|
|
various
|
h******@acbcert.com
|
|
|
app
s
|
Non Technical Contact
|
|
various
|
Firm Name |
Intel Corporation
|
|
various
|
Intel Mobile Communicatons
|
|
various
|
Name |
B**** L******
|
|
various
|
G**** C****
|
|
various
|
G**** C********
|
|
various
|
Physical Address |
425 rue de Goa
|
|
various
|
4
|
|
various
|
425 reu de Goa
|
|
various
|
Antibes, 06600
|
|
various
|
Antibes, 0
|
|
various
|
06600
|
|
various
|
France
|
|
various
|
Telephone Number |
04930********
|
|
various
|
+3349********
|
|
various
|
+********
|
|
various
|
33493********
|
|
various
|
E-mail |
b******@intel.com
|
|
various
|
g******@intel.com
|
|
various
|
B******@intel.com
|
|
various
|
b******@intel.com
|
|
|
app
s
|
Confidentiality (long or short term)
|
| various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| various | No |
| various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| various | No |
| various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 09/04/2024 |
| various | 08/07/2024 |
| various | 08/06/2024 |
| various | 07/29/2024 |
| various | 07/02/2024 |
| various | 06/09/2024 |
| various | 06/04/2024 |
| various | 05/30/2024 |
| various | 05/23/2024 |
| various | 05/13/2024 |
| various | 05/12/2024 |
| various | 04/30/2024 |
| various | 05/04/2024 |
| various | 11/04/2023 |
| various | 10/11/2023 |
| various | 10/03/2023 |
| various | 09/27/2023 |
| various | 09/19/2023 |
| various | 09/14/2023 |
| various | 09/11/2023 |
| various | 09/06/2023 |
| various | 09/05/2023 |
| various | 09/04/2023 |
| various | 09/01/2023 |
| various | 08/29/2023 |
| various | 08/28/2023 |
| various | 08/22/2023 |
| various | 07/03/2023 |
| various | 06/26/2023 |
| various | 06/19/2023 |
| various | 06/13/2023 |
| various | 03/25/2023 |
| various | 03/02/2023 |
| various | 02/25/2023 |
| various | 02/15/2023 |
| various | 01/11/2023 |
| various | 11/27/2022 |
| various | 11/19/2022 |
| various | 11/16/2022 |
| various | 11/15/2022 |
| various | 11/01/2022 |
| various | 10/18/2022 |
| various | 10/17/2022 |
| various | 09/25/2022 |
| various | 09/22/2022 |
| various | 09/11/2022 |
| various | 09/03/2022 |
| various | 08/30/2022 |
| various | 08/15/2022 |
| various | 07/19/2022 |
| various | 07/11/2022 |
| various | 07/09/2022 |
| various | 07/06/2022 |
| various | 07/04/2022 |
| various | 05/28/2022 |
| various | 03/12/2022 |
| various | 03/01/2022 |
| various | 12/29/2021 |
| various | 12/26/2021 |
| various | 09/18/2021 |
| various | 08/24/2021 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| various |
Is this application for software defined/cognitive radio authorization? | No |
| various | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| various | 6XD - 15E 6 GHz Low Power Indoor Client |
| various | DTS - Digital Transmission System |
| various | DSS - Part 15 Spread Spectrum Transmitter |
| various | JBP - Part 15 Class B Computing Device Peripheral |
| various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Intel Wi-Fi 6E AX211 |
| various | Intel Wi-Fi 6 AX211 |
| various | Intel AX211 |
| various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| various | Yes |
| various | Modular Equipment Type | Single Modular Approval |
| various | Does not apply |
| various | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
| various | Class II Permissive Change |
| various | Original Equipment |
| various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| various | Grant Comments | Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, and 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.38W/kg and 1.50W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model TP00118B Detachable PC.
SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.27 W/kg and 1.50 W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model TP00118B Detachable PC.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.18W/kg and 1.50W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model TP00118B Detachable PC.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.67W/kg and 1.50W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model TP00118B Detachable PC.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the Microsoft model 2079 Portable Computing Device. The highest reported Body and Simultaneous SAR values are 0.48 W/kg and 1.12 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the Microsoft model 2079 Portable Computing Device. The highest reported Body and Simultaneous SAR values are 0.25 W/kg and 1.25 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the Microsoft model 2079 Portable Computing Device. The highest reported Body and Simultaneous SAR values are 1.00 W/kg and 1.25 W/kg respectively. |
| various | Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the Microsoft model 2079 Portable Computing Device. The highest reported Body and Simultaneous SAR values are 1.12 W/kg and 1.12 W/kg respectively. |
| various | Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC extends the portable category SAR conditions to UNII-4 band for the Lenovo model TP00137A convertible PC which has been granted on 04/20/2022. The highest reported Body and Simultaneous SAR values are 1.50 W/kg and 1.50 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the Lenovo model Yoga 9 2-in-1 14IMH9. The highest reported Body and Simultaneous SAR values are 1.12 W/kg and 1.29 W/kg respectively. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance.
This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This C2PC establishes portable category SAR conditions for the Lenovo model Yoga 9 2-in-1 14IMH9. The highest reported Body and Simultaneous SAR values are 0.72 W/kg and 1.56 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the Lenovo model Yoga 9 2-in-1 14IMH9. The highest reported Body and Simultaneous SAR values are 0.17 W/kg and 1.56 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the Lenovo model Yoga 9 2-in-1 14IMH9. The highest reported Body and Simultaneous SAR values are 1.07 W/kg and 1.12 W/kg respectively. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance.
This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This C2PC establishes portable category SAR conditions for the Dell model P184G notebook PC. The highest reported Body and Simultaneous SAR values are 0.88 W/kg and 1.55 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the Dell model P184G notebook PC. The highest reported Body and Simultaneous SAR values are 0.24 W/kg and 1.37 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the Dell model P184G notebook PC. The highest reported Body and Simultaneous SAR values are 1.17 W/kg and 1.31 W/kg respectively. |
| various | Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the Dell model P184G notebook PC. The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.37 W/kg respectively. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.76 W/kg and 1.55 W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model ThinkBook 13x G4 IMH convertible PC with PIFA antennas part number DC330022300 and DC330022200.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.14W/kg and 1.55W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model ThinkBook 13x G4 IMH convertible PC with PIFA antennas part number DC330022300 and DC330022200.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.12W/kg and 1.55W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model ThinkBook 13x G4 IMH convertible PC with PIFA antennas part number DC330022300 and DC330022200.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.64W/kg and 1.55W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model ThinkBook 13x G4 IMH convertible PC with PIFA antennas part number DC330022300 and DC330022200.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC extends the portable category SAR conditions to UNII-4 band for the Lenovo model TP00146A convertible PC which has been granted on 02/22/2023. The highest reported Body and Simultaneous SAR values are 1.12 W/kg and 1.48 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the Lenovo model Yoga 9 2-in-1 14IMH9 convertible PC. The G-sensor feature is not activated on the host. The highest reported Body and Simultaneous SAR values are 0.11 W/kg and 1.31 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the Lenovo model Yoga 9 2-in-1 14IMH9 convertible PC. The G-sensor feature is not activated on the host. The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.52 W/kg respectively. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance.
This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This C2PC establishes portable category SAR conditions for the Lenovo model Yoga 9 2-in-1 14IMH9 convertible PC. The G-sensor feature is not activated on the host. The highest reported Body and Simultaneous SAR values are 1.20 W/kg and 1.31 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the Lenovo model Yoga 9 2-in-1 14IMH9 convertible PC. The G-sensor feature is not activated on the host. The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.30 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This C2PC establishes portable category SAR conditions for the Samsung models NP960XGL, NP964XGL notebook PC. The highest reported Body and Simultaneous SAR values are 0.16 W/kg and 1.11 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establishes portable category SAR conditions for the Samsung models NP960XGL, NP964XGL notebook PC. The highest reported Body and Simultaneous SAR values are 0.95 W/kg and 1.11 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establishes portable category SAR conditions for the Samsung models NP960XGL, NP964XGL notebook PC. The highest reported Body and Simultaneous SAR values are 0.53 W/kg and 0.69 W/kg respectively. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This C2PC establishes portable category SAR conditions for the Samsung models NP960XGL, NP964XGL notebook PC. The highest reported Body and Simultaneous SAR values are 0.44 W/kg and 0.60 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the Lenovo model TP00151A convertible PC. The highest reported Body and Simultaneous SAR values are 0.23 W/kg and 1.42 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the Lenovo model TP00151A convertible PC. The highest reported Body and Simultaneous SAR values are 1.12 W/kg and 1.37 W/kg respectively. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance.
This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This C2PC establishes portable category SAR conditions for the Lenovo model TP00151A convertible PC. The highest reported Body and Simultaneous SAR values are 1.17 W/kg and 1.40 W/kg respectively. |
| various | Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the Lenovo model TP00151A convertible PC. The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.42 W/kg respectively. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This C2PC establishes portable category SAR conditions for the Samsung models NP940XGK, NP940XGQ, NP942XGK, NP944XGK notebook PC. The highest reported Body and Simultaneous SAR values are 1.36 W/kg and 1.54 W/kg respectively. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This C2PC establishes portable category SAR conditions for the Samsung models NP960QGK, P961QGK, NP962QGK, NP964QGK, NP960QGQ notebook PC with PIFA antenna part number BA42-00778A and BA42-00779A. The highest reported Body and Simultaneous SAR values are 0.52 W/kg and 0.65 W/kg respectively. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This C2PC establishes portable category SAR conditions for the Samsung models NP960XGK, NP961XGK, NP962XGK, NP964XGK, NP960XGQ notebook PC. The highest reported Body and Simultaneous SAR values are 0.64 W/kg and 0.85 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This C2PC establishes portable category SAR conditions for the Samsung models NP940XGK, NP940XGQ, NP942XGK, NP944XGK notebook PC. The highest reported Body and Simultaneous SAR values are 0.18 W/kg and 1.54 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establishes portable category SAR conditions for the Samsung models NP940XGK, NP940XGQ, NP942XGK, NP944XGK notebook PC. The highest reported Body and Simultaneous SAR values are 0.98 W/kg and 1.16 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establishes portable category SAR conditions for the Samsung models NP940XGK, NP940XGQ, NP942XGK, NP944XGK notebook PC. The highest reported Body and Simultaneous SAR values are 1.34 W/kg and 1.53 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establishes portable category SAR conditions for the Samsung models NP960QGK, P961QGK, NP962QGK, NP964QGK, NP960QGQ notebook PC with PIFA antenna part number BA42-00778A and BA42-00779A. The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.32 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establishes portable category SAR conditions for the Samsung models NP960QGK, P961QGK, NP962QGK, NP964QGK, NP960QGQ notebook PC with PIFA antenna part number BA42-00778A and BA42-00779A. The highest reported Body and Simultaneous SAR values are 1.03 W/kg and 1.07 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This C2PC establishes portable category SAR conditions for the Samsung models NP960QGK, P961QGK, NP962QGK, NP964QGK, NP960QGQ notebook PC with PIFA antenna part number BA42-00778A and BA42-00779A. The highest reported Body and Simultaneous SAR values are 0.13 W/kg and 1.32 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establishes portable category SAR conditions for the Samsung models NP960XGK, NP961XGK, NP962XGK, NP964XGK, NP960XGQ notebook PC. The highest reported Body and Simultaneous SAR values are 1.20 W/kg and 1.20 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This C2PC establishes portable category SAR conditions for the Samsung models NP960XGK, NP961XGK, NP962XGK, NP964XGK, NP960XGQ notebook PC. The highest reported Body and Simultaneous SAR values are 0.21 W/kg and 1.58 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establishes portable category SAR conditions for the Samsung models NP960XGK, NP961XGK, NP962XGK, NP964XGK, NP960XGQ notebook PC. The highest reported Body and Simultaneous SAR values are 1.37 W/kg and 1.58 W/kg respectively. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.33 W/kg and 1.57 W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C162 Notebook PC with Pifa antennas (Part numbers: AUP5Y-100007, AUP5Y-100008 WA-P-LE-02-084 and WAP-LE-02-085. WLAN TAS feature is enabled. The G Sensor lid angle calculation table has been adjusted as described in this filing.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing.
Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are1.41W/kg and 1.57W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C162 Notebook PC with Pifa antennas (Part numbers: AUP5Y-100007, AUP5Y-100008 WA-P-LE-02-084 and WAP-LE-02-085. WLAN TAS feature is enabled. The G Sensor lid angle calculation table has been adjusted as described in this filing.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.34W/kg and 1.57W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C162 Notebook PC with Pifa antennas (Part numbers: AUP5Y-100007, AUP5Y-100008 WA-P-LE-02-084 and WAP- LE-02-085. WLAN TAS feature is enabled. The G Sensor lid angle calculation table has been adjusted as described in this filing.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM
integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, and 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled
for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.22W/kg and 1.57W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C162 Notebook PC with Pifa antennas (Part numbers: AUP5Y-100007, AUP5Y-100008 WA-P-LE-02-084 and WA-P-LE-02-085. WLAN TAS feature is enabled. The G Sensor lid angle calculation table has been adjusted as described in this filing.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF
compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.31W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P92F PC with HB 025.901WT.0011 (330-29002) (Main), and 025.901WU.0011 (330-29003) (Aux). - WNC 025.901WT.0001 (81ELA115.G24) (Main), 025.901WU.0001 (81ELA115.G25) (Aux) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.64W/kg and 1.31W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P92F PC with HB 025.901WT.0011 (330-29002) (Main), and 025.901WU.0011 (330-29003) (Aux). - WNC 025.901WT.0001 (81ELA115.G24) (Main), 025.901WU.0001 (81ELA115.G25) (Aux) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.43W/kg and 1.31W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P92F PC with HB 025.901WT.0011 (330-29002) (Main), and 025.901WU.0011 (330-29003) (Aux). - WNC 025.901WT.0001 (81ELA115.G24) (Main), 025.901WU.0001 (81ELA115.G25) (Aux) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted for the UNII-1 to UNII3 and EIRP for the UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.66W/kg and 1.21W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P91F PC with HB 260-24287 and 260-24288 and 260-24311 and 260-24312 and WNC 81ELAS15.G02 and 81ELAS15.G01 and 81ELAS15.G67 and 81ELAS15.G68 and Speed F.0G.FH-6101-002-00 and F.0G.FH-6101-001-00 and F.0G.FH-6101-006-00 and F.0G.FH-6101-005-00 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
For the UNII-1 to UNII-3 band this device has been previously approved for Antenna type: Monopole Antenna P/N 260-25083 was tested at 30mm. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.50W/kg respectively. SAR testing has been performed to demonstrate RF compliance for the UNII-1 to UNII-3 bands.
This change is to add a new antenna for a monopole type (Hong-Bo part no. 260-25084 and 260-25083) for the UNII-4 Band. All other hardware remains identical and all antenna gains are equal or less than those approved originally. Use of this antenna meets MPE requirements of KDB447498 and can be used in mobile configurations. Use in portable configurations requires appropriate evaluation and Permissive Change as required by RF exposure procedures. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.77W/kg and 1.50W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model ThinkBook Plus G4 IRU Convertible PC with Speed DC330020K00 and DC330020K10 and Hong-Bo DC330020L00 and DC330020L10 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.50W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model ThinkBook Plus G4 IRU Convertible PC with Speed DC330020K00 and DC330020K10 and Hong-Bo DC330020L00 and DC330020L10 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.64W/kg and 1.50W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model ThinkBook Plus G4 IRU Convertible PC with Speed DC330020K00 and DC330020K10 and Hong-Bo DC330020L00 and DC330020L10 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.84 W/kg and 1.50 W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model
ThinkBook Plus G4 IRU Convertible PC with Speed DC330020K00 and DC330020K10 and Hong-Bo DC330020L00 and DC330020L10 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.48 W/kg and 1.02 W/kg respectively.
This modules satisfies conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value less than 0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This change establishes portable category SAR conditions for the ASUS model
B9403CV Notebook PC with Luxshare ICT 14008-05430100 and 14008-05430000 and INPAQ WA-P-LE-01-038 and WA-P-LE-02-135 antennas. WLAN TAS feature enabled.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.51W/kg and 1.35W/kg respectively.
This modules satisfies conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value less than 0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01.
This change establishes portable category SAR conditions for the ASUS model
B9403CV Notebook PC with Luxshare ICT 14008-05430100 and 14008-05430000 and INPAQ WA-P-LE-01-038 and WA-P-LE-02-135 antennas. WLAN TAS feature enabled.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.68W/kg and 1.35W/kg respectively.
This modules satisfies conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value less than 0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01.
This change establishes portable category SAR conditions for the ASUS model
B9403CV Notebook PC with Luxshare ICT 14008-05430100 and 14008-05430000 and INPAQ WA-P-LE-01-038 and WA-P-LE-02-135 antennas. WLAN TAS feature enabled.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.13W/kg and 1.35W/kg respectively.
This modules satisfies conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value less than 0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01.
This change establishes portable category SAR conditions for the ASUS model
B9403CV Notebook PC with Luxshare ICT 14008-05430100 and 14008-05430000 and INPAQ WA-P-LE-01-038 and WA-P-LE-02-135 antennas. WLAN TAS feature enabled.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establishes portable category SAR conditions for the Lenovo model Yoga Book 9 13IRU8 Convertible PC. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 1.18 W/kg and 1.46 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This C2PC establishes portable category SAR conditions for the Lenovo model Yoga Book 9 13IRU8 Convertible PC. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 1.46 W/kg respectively. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This C2PC establishes portable category SAR conditions for the Lenovo model Yoga Book 9 13IRU8 Convertible PC. The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.45 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establishes portable category SAR conditions for the Lenovo model Yoga Book 9 13IRU8 Convertible PC. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 1.18 W/kg and 1.26 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establishes portable category SAR conditions for the Dell model P176G PC. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 1.16 W/kg and 1.28 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This C2PC establishes portable category SAR conditions for the Dell model P176G PC. The highest reported Body and Simultaneous SAR values are 0.12 W/kg and 1.28 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establishes portable category SAR conditions for the Dell model P176G PC. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.99 W/kg and 1.11 W/kg respectively. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This C2PC establishes portable category SAR conditions for the Dell model P176G PC. The highest reported Body and Simultaneous SAR values are 0.96 W/kg and 1.08 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establishes portable category SAR conditions for the Dell model P174G PC. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 1.18 W/kg and 1.29 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This C2PC establishes portable category SAR conditions for the Dell model P174G PC. The highest reported Body and Simultaneous SAR values are 0.11 W/kg and 1.29 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establishes portable category SAR conditions for the Dell model P174G PC. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.69 W/kg and 1.16 W/kg respectively. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This C2PC establishes portable category SAR conditions for the Dell model P174G PC. The highest reported Body and Simultaneous SAR values are 0.83 W/kg and 1.57 W/kg respectively. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This C2PC establishes portable category SAR conditions for the Dell model P126F notebook PC. The highest reported Body and Simultaneous SAR values are 1.03 W/kg and 1.19 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establishes portable category SAR conditions for the Dell model P126F notebook PC. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 1.01 W/kg and 1.17 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establishes portable category SAR conditions for the Dell model P126F notebook PC. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.69 W/kg and 1.22 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This C2PC establishes portable category SAR conditions for the Dell model P126F notebook PC. The highest reported Body and Simultaneous SAR values are 0.16 W/kg and 1.17 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.69W/kg and 1.40W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P175G convertible PC with Speed F-0G-FH-6165-001-00 and F-0G-FH-6165-001-00 antennas. The WLAN TAS feature is enabled.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.19W/kg and 1.40W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P175G convertible PC with Speed F-0G-FH-6165-001-00 and F-0G-FH-6165-001-00 antennas. The WLAN TAS feature is enabled.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.16 W/kg and 1.40 W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P175G convertible PC with Speed F-0G-FH-6165-001-00 and F-0G-FH-6165-001-00 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.15W/kg and 1.40W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P175G convertible PC with Speed F-0G-FH-6165-001-00 and F-0G-FH-6165-001-00 antennas. The WLAN TAS feature is enabled.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.02W/kg and 1.33W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P166G convertible PC with SPEED F-0G-FH-6158-001-00 and F-0G-FH-6158-001-00 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, and 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.34W/kg and 1.33W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P166G convertible PC with SPEED F-0G-FH-6158-001-00 and
F-0G-FH-6158-001-00 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.16 W/kg and 1.33 W/kg respectively.
This change establishes portable category SAR conditions for the Dell model
P166G convertible PC with SPEED F-0G-FH-6158-001-00 and
F-0G-FH-6158-001-00 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.17W/kg and 1.33W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P166G convertible PC with SPEED F-0G-FH-6158-001-00 and
F-0G-FH-6158-001-00 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance.
This C2PC establishes portable category SAR conditions for the Dell model P178G notebook PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.59 W/kg respectively. |
| various | Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance.
This C2PC establishes portable category SAR conditions for the Dell model P178G notebook PC. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.78 W/kg and 1.59 W/kg respectively. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This C2PC establishes portable category SAR conditions for the Dell model P178G notebook PC. The highest reported Body and Simultaneous SAR values are 0.75 W/kg and 1.33 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance.
This C2PC establishes portable category SAR conditions for the Dell model P178G notebook PC. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.30 W/kg and 0.59 W/kg respectively. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This C2PC establishes portable category SAR conditions for the Dell model P178G notebook PC. The highest reported Body and Simultaneous SAR values are 0.74 W/kg and 1.46 W/kg respectively. |
| various | Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance.
This C2PC establishes portable category SAR conditions for the Dell model P178G notebook PC. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.98 W/kg and 1.49 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance.
This C2PC establishes portable category SAR conditions for the Dell model P178G notebook PC. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.37 W/kg and 0.54 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance.
This C2PC establishes portable category SAR conditions for the Dell model P178G notebook PC. The highest reported Body and Simultaneous SAR values are 0.17 W/kg and 1.49 W/kg respectively. |
| various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.95 W/kg and 1.31 W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I52C PC with Vendor 1 Part Number 6036B0321001 and 6036B0321101 and Vendor 2 Part Number 6036B0315001 and 6036B0314901 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.84 W/kg and 1.57 W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P179G convertible PC with Wistron 0NHYY4 and 0NHYY4 antennas. The WLAN TAS feature is enabled.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, and 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.92W/kg and 1.57W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P179G convertible PC with Wistron 0NHYY4 and 0NHYY4 antennas. The WLAN TAS feature is enabled.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.76W/kg and 1.57W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P179G convertible PC with Wistron 0NHYY4 and 0NHYY4 antennas. The WLAN TAS feature is enabled.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.19W/kg and 1.57W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P179G convertible PC with Wistron 0NHYY4 and 0NHYY4 antennas. The WLAN TAS feature is enabled.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This C2PC establishes portable category SAR conditions for the Lenovo model TP00146A convertible PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.48 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establishes portable category SAR conditions for the Lenovo model TP00146A convertible PC. The highest reported Body and Simultaneous SAR values are 0.79 W/kg and 1.48 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establishes portable category SAR conditions for the Lenovo model TP00146A convertible PC. The highest reported Body and Simultaneous SAR values are 0.59 W/kg and 1.12 W/kg respectively. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This C2PC establishes portable category SAR conditions for the Lenovo model TP00146A convertible PC. The highest reported Body and Simultaneous SAR values are 0.88 W/kg and 0.96 W/kg respectively. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This C2PC establishes portable category SAR conditions for the Samsung models NP960XFH, NP964XFH PC. The highest reported Body and Simultaneous SAR values are 0.39 W/kg and 0.52 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establishes portable category SAR conditions for the Samsung models NP960XFH, NP964XFH PC. The highest reported Body and Simultaneous SAR values are 0.94 W/kg and 1.07 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This C2PC establishes portable category SAR conditions for the Samsung models NP960XFH, NP964XFH PC. The highest reported Body and Simultaneous SAR values are 0.13 W/kg and 1.07 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establishes portable category SAR conditions for the Samsung models NP960XFH, NP964XFH PC. The highest reported Body and Simultaneous SAR values are 0.44 W/kg and 0.52 W/kg respectively. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This C2PC establishes portable category SAR conditions for the Samsung models NP960QFG, NP961QFG, NP964QFG PC. The highest reported Body and Simultaneous SAR values are 0.62 W/kg and 0.88 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This C2PC establishes portable category SAR conditions for the Samsung models NP960QFG, NP961QFG, NP964QFG PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.20 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establishes portable category SAR conditions for the Samsung models NP960QFG, NP961QFG, NP964QFG PC. The highest reported Body and Simultaneous SAR values are 1.17 W/kg and 1.20 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establishes portable category SAR conditions for the Samsung models NP960QFG, NP961QFG, NP964QFG PC. The highest reported Body and Simultaneous SAR values are 0.90 W/kg and 1.45 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This C2PC establishes portable category SAR conditions for the Samsung models NP940XFG, NP941XFG, NP944XFG PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 0.66 W/kg respectively. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This C2PC establishes portable category SAR conditions for the Samsung models NP940XFG, NP941XFG, NP944XFG PC. The highest reported Body and Simultaneous SAR values are 0.20 W/kg and 0.27 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establishes portable category SAR conditions for the Samsung models NP940XFG, NP941XFG, NP944XFG PC. The highest reported Body and Simultaneous SAR values are 0.45 W/kg and 0.52 W/kg respectively |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establishes portable category SAR conditions for the Samsung models NP940XFG, NP941XFG, NP944XFG PC. The highest reported Body and Simultaneous SAR values are 0.60 W/kg and 0.66 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.85W/kg and 1.19W/kg respectively.
This change establishes portable category SAR conditions for the Samsung models NP960XFG, NP961XFG, NP964XFG PC with WNC BA42-00764A and BA42-00764A antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.19W/kg and 1.19W/kg respectively.
This change establishes portable category SAR conditions for the
Samsung models NP960XFG, NP961XFG, NP964XFG PC with WNC
BA42-00764A and BA42-00764A antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.84 W/kg and 1.19 W/kg respectively.
This change establishes portable category SAR conditions for the Samsung models NP960XFG, NP961XFG, NP964XFG PC with WNC BA42-00764A and BA42-00764A antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.00W/kg and 1.19W/kg respectively.
This change establishes portable category SAR conditions for the Samsung models NP960XFG, NP961XFG, NP964XFG PC with WNC BA42-00764A and BA42-00764A antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value less than 0.8W/kg(1g) for mixed mobile/portable conditions. The highest reported Body and Simultaneous SAR values are 0.69 W/kg and 1.31 W/kg respectively.
SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value less than 0.8W/kg(1g) for mixed mobile/portable conditions. The highest reported Body and Simultaneous SAR values are 0.68 W/kg and 1.35 W/kg respectively.
SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.04W/kg and 1.43W/kg respectively.
This change establishes portable category SAR conditions for the MS Model 2038.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.24W/kg respectively.
This change establishes portable category SAR conditions for the HP model
HSN-I45C-4 PC with HONGBO 6036B0309501 and 6036B0309001 and
WNC with 6036B0307301 and 6036B0307101 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.32W/kg and 1.43W/kg respectively.
This change establishes portable category SAR conditions for the MS model 2038.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.09W/kg and 1.43W/kg respectively.
This change establishes portable category SAR conditions for the MS Model 2038.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, and 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.67W/kg and 1.24W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I45C-4 PC with HONGBO 6036B0309501 and 6036B0309001 and WNC with 6036B0307301 and 6036B0307101 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are0.36W/kg and 1.24W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I45C-4 PC with HONGBO 6036B0309501 and 6036B0309001 and WNC with 6036B0307301 and 6036B0307101 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 1.24 W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I45C-4 PC with HONGBO 6036B0309501 and 6036B0309001 and WNC with 6036B0307301 and 6036B0307101 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.07 W/kg and 1.43 W/kg respectively.
This change establishes portable category SAR conditions for the MS Model 2038.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establishes portable category SAR conditions for the Lenovo model TP00144A PC. The highest reported Body and Simultaneous SAR values are 0.83 W/kg and 1.35 W/kg respectively. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This C2PC establishes portable category SAR conditions for the Lenovo model TP00144A PC. The highest reported Body and Simultaneous SAR values are 1.10 W/kg and 1.38 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This C2PC establishes portable category SAR conditions for the Lenovo model TP00144A PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.55 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establishes portable category SAR conditions for the Lenovo model TP00144A PC. The highest reported Body and Simultaneous SAR values are 1.15 W/kg and 1.55 W/kg respectively. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.48 W/kg and 1.02 W/kg respectively.
To establish conditions based on modular stand-alone SAR evaluation to establish
minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. Request reassessment for 6XD only.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establishes portable category SAR conditions for the HP model R2022 PC. The highest reported Body and Simultaneous SAR values are 0.43 W/kg and 0.76 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This C2PC establishes portable category SAR conditions for the HP model R2022 PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.20 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establishes portable category SAR conditions for the HP model R2022 PC. The highest reported Body and Simultaneous SAR values are 1.17 W/kg and 1.20 W/kg respectively. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This C2PC establishes portable category SAR conditions for the HP model R2022 PC. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.58 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This change establishes portable category SAR conditions for the HP model HSN-I55C
PC. TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 1.18 W/kg and 1.58 W/kg respectively.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance.
This change establishes portable category SAR conditions for the HP model HSN-I55C
PC. The highest reported Body and Simultaneous SAR values are 1.05 W/kg and 1.42 W/kg respectively.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This change establishes portable category SAR conditions for the HP model HSN-I55C
PC. TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 1.20 W/kg and 1.23 W/kg respectively.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This change establishes portable category SAR conditions for the HP model HSN-I55C
PC. The highest reported Body and Simultaneous SAR values are 0.18 W/kg and 1.23 W/kg respectively.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations.
Addition of a new antenna, antenna type is different with the original application. Hong Bo P/N 260-25084, (Antenna type: Monopole Antenna / 6XD Grant).
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.38W/kg and 1.50W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP931QED, NP934QED PC with Galtronics BA42-00728A and BA42-00729A antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.07 W/kg and 1.50 W/kg respectively.
This change establishes portable category SAR conditions for the Samsung
model NP931QED, NP934QED PC with Galtronics BA42-00728A and BA42-00729A
antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.39W/kg and 1.50W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP931QED, NP934QED PC with Galtronics BA42-00728A and BA42-00729A antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.37W/kg and 1.50W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP931QED, NP934QED PC with Galtronics BA42-00728A and BA42-00729A antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.47W/kg and 1.46W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP931XED, NP934XED PC with WNC BA42-00698A and BA42-00699A antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.15W/kg and 1.46W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP931XED, NP934XED PC with WNC BA42-00698A and BA42-00699A antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.09W/kg and 1.34W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP954XEE PC with WNC BA42-00704A and BA42-00705A antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.31W/kg and 1.46 W/kg respectively.
This change establishes portable category SAR conditions for the
Samsung model NP931XED, NP934XED PC with WNC BA42-00698A and
BA42-00699A antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.02 W/kg and 1.34 W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model
NP954XEE PC with WNC BA42-00704A and BA42-00705A antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.41W/kg and 1.46W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP931XED, NP934XED PC with WNC BA42-00698A and BA42-00699A antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.27W/kg and 1.34W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP954XEE PC with WNC BA42-00704A and BA42-00705A antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.67W/kg and 1.34W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP954XEE PC with WNC BA42-00704A and BA42-00705A antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.06 W/kg and 1.30 W/kg respectively.
This change establishes portable category SAR conditions for the Samsung
models NP954XED, NP951XED PC with WNC BA42-00704A and BA42-00705A antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.44W/kg and 1.30W/kg respectively.
This change establishes portable category SAR conditions for the Samsung models NP954XED, NP951XED PC with WNC BA42-00704A and BA42-00705A antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.47W/kg and 1.30W/kg respectively.
This change establishes portable category SAR conditions for the Samsung models NP954XED, NP951XED PC with WNC BA42-00704A and BA42-00705A antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.15W/kg and 1.30W/kg respectively.
This change establishes portable category SAR conditions for the Samsung models NP954XED, NP951XED PC with WNC BA42-00704A and BA42-00705A antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.33W/kg and 0.49W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P115F PC with WNC 81ELA115.G22 and 81ELA115.G21 and Hong-Bo 330-24014 and 330-24016 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.71W/kg and 1.29W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model Slim 9 14IAP7 PC with Amphenol DC33001W300 and Speed DC33001XW00 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 0.49W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P115F PC with WNC 81ELA115.G22 and 81ELA115.G21 and Hong-Bo 330-24014 and 330-24016 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.24W/kg and 1.36W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model Slim 9 14IAP7 PC with Amphenol DC33001W300 and Speed DC33001XW00 antennas
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.09 W/kg and 1.33 W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model Slim 9 14IAP7 PC with Amphenol DC33001W300 and Speed DC33001XW00 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.16W/kg and 0.49W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P115F PC with WNC 81ELA115.G22 and 81ELA115.G21 and Hong-Bo 330-24014 and 330-24016 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.12W/kg and 1.36W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model Slim 9 14IAP7 PC with Amphenol DC33001W300 and Speed DC33001XW00 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.05W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P114F PC with WNC 81ELA115.G04 and 81ELA115.G03 and Hong-Bo 330-24013 and 330-24015 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.64W/kg and 1.05W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P114F PC with WNC 81ELA115.G04 and 81ELA115.G03 and Hong-Bo 330-24013 and 330-24015 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04 W/kg and 1.05 W/kg respectively.
This change establishes portable category SAR conditions for the Dell
model P114F PC with WNC 81ELA115.G04 and 81ELA115.G03 and Hong-Bo
330-24013 and 330-24015 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02 W/kg and 0.49 W/kg respectively.
This change establishes portable category SAR conditions for the Dell
model P115F PC with WNC 81ELA115.G22 and 81ELA115.G21 and Hong-Bo
330-24014 and 330-24016 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 1.05W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P114F PC with WNC 81ELA115.G04 and 81ELA115.G03 and Hong-Bo 330-24013 and 330-24015 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.28W/kg and 1.10W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model IdeaPad Duet 5 12IAU7 PC with AWAN AYF6Y-100194 and 6AYF6Y-100195 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are1.02 W/kg and 1.34 W/kg respectively.
This change establishes portable category SAR conditions for the
Samsung model NP950XEE PC with WNC BA42-00704A and BA42-00705A antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.09W/kg and 1.34W/kg respectively.
This change establishes portable category SAR conditions for the
Samsung model NP950XEE PC with WNC BA42-00704A and BA42-00705A antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.15W/kg and 1.38W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model IdeaPad Duet 5 12IAU7 PC with AWAN AYF6Y-100194 and 6AYF6Y-100195 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.27W/kg and 1.34W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP950XEE PC with WNC BA42-00704A and BA42-00705A antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.67W/kg and 1.34W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP950XEE PC with WNC BA42-00704A and BA42-00705A antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.17W/kg and 1.17W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model IdeaPad Duet 5 12IAU7 PC with AWAN AYF6Y-100194 and 6AYF6Y-100195 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.39W/kg and 1.23W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model TP00137A PC with AVX 025.901X3.0001 and 025.901X4.0001 and AWAN 025.901WZ.0001 and 025.901X0.0001 antennas
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.92W/kg and 1.23W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model TP00137A PC with AVX 025.901X3.0001 and 025.901X4.0001 and AWAN 025.901WZ.0001 and 025.901X0.0001 antennas
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.16W/kg and 1.16W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model TP00137A PC with AVX 025.901X3.0001 and 025.901X4.0001 and AWAN 025.901WZ.0001 and 025.901X0.0001 antennas
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.15 W/kg and 1.16 W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model TP00137A PC with AVX 025.901X3.0001 and 025.901X4.0001 and AWAN 025.901WZ.0001 and 025.901X0.0001 antennas
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.71W/kg and 1.37W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-Q273 PC with WNC DQ6L15G6300 antenna.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.73 W/kg and 1.37 W/kg respectively.
This change establishes portable category SAR conditions for the HP
model TPN-Q273 PC with WNC DQ6L15G6300 antenna.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.37W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-Q273 PC with WNC DQ6L15G6300 antenna.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.65W/kg and 1.37W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-Q273 PC with WNC DQ6L15G6300 antenna.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.64W/kg and 1.24W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multitransmitter product procedures. Only those antenna(s) tested with the device or
similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must
be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest
reported Body and Simultaneous SAR values are 0.05W/kg and 1.31W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I52C PC with HONG-BO 6036B0321001 and 6036B0321101 and WNC 6036B0315001 and 6036B0314901 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described
in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band
operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.95W/kg and 1.31W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I52C PC with HONG-BO 6036B0321001 and 6036B0321101 and WNC 6036B0315001 and 6036B0314901 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain
may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable
host configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 Supplement documentation. When all conditions of this
filing cannot be met installation of this device into specific final products may require the submission of a
permissive change application, containing appropriate data demonstrating compliance,or a new application.
OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO
configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host
integrator is responsible for complying with the instructions and requirements for each transmitter they
choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.66W/kg and 1.31W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I52C PC with HONG-BO 6036B0321001 and 6036B0321101 and WNC 6036B0315001 and 6036B0314901 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and
SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and
Simultaneous SAR values are 0.31 W/kg and 1.31 W/kg respectively.
This change establishes portable category SAR conditions for the HP
model HSN-I52C PC with HONG-BO 6036B0321001 and 6036B0321101 and
WNC 6036B0315001 and 6036B0314901 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described
in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band
operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and
Simultaneous SAR values are 0.64W/kg and 1.21W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P91F PC with HB 260-24287 and 260-24288 and 260-24311 and 260-24312 and WNC 81ELAS15.G02 and 81ELAS15.G01 and 81ELAS15.G67 and 81ELAS15.G68 and Speed F.0G.FH-6101-002-00 and F.0G.FH-6101-001-00 and F.0G.FH-6101-006-00 and F.0G.FH-6101-005-00 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission
SAR requirements according to published KDB 616217 Supplement documentation. When all conditions
of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating
compliance,or a new application. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client
only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as
described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.70W/kg and 1.21W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P91F PC with HB 260-24287 and 260-24288 and 260-24311 and 260-24312 and WNC 81ELAS15.G02 and 81ELAS15.G01 and 81ELAS15.G67 and 81ELAS15.G68 and Speed F.0G.FH-6101-002-00 and F.0G.FH-6101-001-00 and F.0G.FH-6101-006-00 and F.0G.FH-6101-005-00 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device
or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers
must be provided with transmitter operating conditions for satisfying RF exposure compliance. The
highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.21W/kg respectively.
This change establishes portable category SAR conditions for the Dell
model P91F PC with HB 260-24287 and 260-24288 and 260-24311 and 260-24312 and WNC 81ELAS15.G02 and 81ELAS15.G01 and 81ELAS15.G67 and 81ELAS15.G68 and Speed F.0G.FH-6101-002-00 and F.0G.FH-6101-001-00 and F.0G.FH-6101-006-00 and F.0G.FH-6101-005-00 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations.
Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used
with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change
application, containing appropriate data demonstrating compliance,or a new application. OEM/Host
integrator must be provided with antenna installation instructions and transmitter operating conditions to
satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration,
enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.43W/kg and
0.85W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P92F PC with HB 025.901WT.0011 (330-29002) (Main), and 025.901WU.0011 (330-29003) (Aux). - WNC 025.901WT.0001 (81ELA115.G24) (Main), 025.901WU.0001 (81ELA115.G25) (Aux) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported
Body and Simultaneous SAR values are 0.04W/kg and 0.85W/kg respectively.
This change establishes portable category SAR conditions for the Dell
model P92F PC with HB 025.901WT.0011 (330-29002) (Main), and
025.901WU.0011 (330-29003) (Aux). - WNC 025.901WT.0001 (81ELA115.G24) (Main), 025.901WU.0001 (81ELA115.G25) (Aux) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described
in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band
operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.42W/kg and 0.85W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P92F PC with HB 025.901WT.0011 (330-29002) (Main), and 025.901WU.0011 (330-29003) (Aux). - WNC 025.901WT.0001 (81ELA115.G24) (Main), 025.901WU.0001 (81ELA115.G25) (Aux) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multitransmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported
Body and Simultaneous SAR values are 0.21W/kg and 1.59W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model ThinkPad X13 Yoga Gen 3 (TP00127B) PC with AWAN 025.901S1.0041 and 025.901S1.0051 and WNC 025.901S1.0001 and 025.901S1.0011 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations.
Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used
with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change
application, containing appropriate data demonstrating compliance,or a new application. OEM/Host
integrator must be provided with antenna installation instructions and transmitter operating conditions to
satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration,
enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they choose to
integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.59W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model ThinkPad X13 Yoga Gen 3 (TP00127B) PC with AWAN 025.901S1.0041 and 025.901S1.0051 and WNC 025.901S1.0001 and 025.901S1.0011 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and
SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and
Simultaneous SAR values are 1.42 W/kg and 1.59 W/kg respectively.
This change establishes portable category SAR conditions for the
Lenovo model ThinkPad X13 Yoga Gen 3 (TP00127B) PC with AWAN
025.901S1.0041 and 025.901S1.0051 and WNC 025.901S1.0001 and
025.901S1.0011 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described
in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band
operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and
Simultaneous SAR values are 0.79W/kg and 1.59W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model ThinkPad X13 Yoga Gen 3 (TP00127B) PC with AWAN 025.901S1.0041 and 025.901S1.0051 and WNC 025.901S1.0001 and 025.901S1.0011 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.01W/kg and 0.86W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P48E PC with WNC 81EABJ15.G16 and 81EABJ15.G17 and AWAN AXF8Y-100000 and AXF8Y-100001 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations.
Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used
with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change
application, containing appropriate data demonstrating compliance,or a new application. OEM/Host
integrator must be provided with antenna installation instructions and transmitter operating conditions to
satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration,
enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they choose to
integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.21W/kg and 0.86W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P48E PC with WNC 81EABJ15.G16 and 81EABJ15.G17 and AWAN AXF8Y-100000 and AXF8Y-100001 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and
SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and
Simultaneous SAR values are 0.09 W/kg and 0.86 W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P48E
PC with WNC 81EABJ15.G16 and 81EABJ15.G17 and AWAN AXF8Y-100000 and
AXF8Y-100001 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described
in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band
operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.48W/kg and 0.86W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P48E PC with WNC 81EABJ15.G16 and 81EABJ15.G17 and AWAN AXF8Y-100000 and AXF8Y-100001 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into
specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in
this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations
as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.47W/kg and 1.30W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP950XED PC with WNC BA42-00704A and BA42-00705A antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge
channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with
the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must
coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data demonstrating
compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.44W/kg and 1.30W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP950XED PC with WNC BA42-00704A and BA42-00705A antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and
SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.06 W/kg and 1.30 W/kg respectively.
This change establishes portable category SAR conditions for the
Samsung model NP950XED PC with WNC BA42-00704A and BA42-00705A
antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.15W/kg and 1.30W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP950XED PC with WNC BA42-00704A and BA42-00705A antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and
SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.07 W/kg and 1.58 W/kg respectively.
This change establishes portable category SAR conditions for the
Samsung model NP930QED PC with Galtronics BA42-00728A and BA42-00729A
antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.15W/kg and 1.46W/kg respectively.
This change establishes portable category SAR conditions for the
Samsung model NP930XED PC with WNC BA42-00698A and BA42-00699A
antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described
in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band
operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.47W/kg and 1.46W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP930XED PC with WNC BA42-00698A and BA42-00699A antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multi-transmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or
similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must
be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.31 W/kg and 1.46 W/kg respectively.
This change establishes portable category SAR conditions for the
Samsung model NP930XED PC with WNC BA42-00698A and BA42-00699A
antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations.
Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used
with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot
be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host
integrator must be provided with antenna installation instructions and transmitter operating conditions to
satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration,
enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.41W/kg and
1.46W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP930XED PC with WNC BA42-00698A and BA42-00699A antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.38W/kg and 1.50W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP930QED PC with Galtronics BA42-00728A and BA42-00729A antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported
Body and Simultaneous SAR values are 0.37W/kg and 1.50W/kg respectively.
This change establishes portable category SAR conditions for the
Samsung model NP930QED PC with Galtronics BA42-00728A and BA42-00729A
antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into
specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in
this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations
as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.39W/kg and 1.50W/kg respectively.
This change establishes portable category SAR conditions for the Samsung model NP930QED PC with Galtronics BA42-00728A and BA42-00729A antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.38 W/kg and 1.30 W/kg respectively.
This change establishes portable category SAR conditions for the
Lenovo model Yoga 9 14IAP7 PC with Speed DC33001XB00 and LUXSHARE-ICT
DC33001WE00 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described
in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band
operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.30W/kg and 1.51W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model Yoga 9 14IAP7 PC with Speed DC33001XB00 and LUXSHARE-ICT DC33001WE00 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported
Body and Simultaneous SAR values are 0.14W/kg and 1.51W/kg respectively.
This change establishes portable category SAR conditions for the
Lenovo model Yoga 9 14IAP7 PC with Speed DC33001XB00 and LUXSHARE-ICT
DC33001WE00 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge
channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those
antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this
transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure
RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB
616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.14W/kg and 1.51W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model Yoga 9 14IAP7 PC with Speed DC33001XB00 and LUXSHARE-ICT DC33001WE00 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.
Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures.
This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s)
with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation
of this device into specific final products may require the submission of a permissive change application, containing
appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth
modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4
or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for
complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.58W/kg and 1.29W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model TP100128B (ThinkPad X1 Yoga Gen 7) PC with JYT/NVC 10-NA0014601 and 10-NA0014701 and Amphenol TKE378-16-000-R and TKE379-16-000-R antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge
channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those
antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this
transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure
RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB
616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application, containing
appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band
operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.16W/kg and 1.29W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model TP100128B (ThinkPad X1 Yoga Gen 7) PC with JYT/NVC 10-NA0014601 and 10-NA0014701 and Amphenol TKE378-16-000-R and TKE379-16-000-R antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.20W/kg and 1.29W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model TP100128B (ThinkPad X1 Yoga Gen 7) PC with JYT/NVC 10-NA0014601 and
10-NA0014701 and Amphenol TKE378-16-000-R and TKE379-16-000-R antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or
similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must
be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.59 W/kg and 1.34 W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model TP100128B (ThinkPad X1 Yoga Gen 7) PC with JYT/NVC 10-NA0014601 and 10-NA0014701 and Amphenol TKE378-16-000-R and TKE379-16-000-R antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.
Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures.
This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s)
with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation
of this device into specific final products may require the submission of a permissive change application, containing
appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth
modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4
or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for
complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.68W/kg and 1.35W/kg respectively.
To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01.
SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.13W/kg and 0.68W/kg respectively.
To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and
Tablets v01.
SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge
channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those
antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this
transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure
RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB
616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application, containing
appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band
operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.51W/kg and 1.35W/kg respectively.
To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01.
SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge
channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with
the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must
coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data demonstrating
compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.63W/kg and 1.31W/kg respectively.
To establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01.
SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multi-transmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.09W/kg and 1.31W/kg respectively.
To establish conditions based on modular stand-alone SAR evaluation to establish
minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01.
SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product
procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or
similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM
integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must
be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.69W/kg and 1.31W/kg respectively.
To establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01.
SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations.
Addition of new antenna, antenna type is different from the original application. Antenna type - Wieson Dipole ARY121-0009-002-H0, tested at 20cm. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with
the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must
coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data demonstrating
compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in
this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations.
Addition of new antenna, antenna type is different from the original application. Antenna type - Wieson Dipole ARY121-0009-002-H0, tested at 20cm. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge
channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission
SAR requirements according to published KDB 616217 Supplement documentation. When all conditions
of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating
compliance,or a new application. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client
only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations.
Addition of new antenna, antenna type is different from the original application. Antenna type - Wieson Dipole ARY121-0009-002-H0, tested at 20cm. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multi-transmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or
similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must
be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.01W/kg and 1.50W/kg respectively.
Addition of a new antenna, antenna type is different with the original application. (Antenna type: Monopole Antenna P/N 260-25083) tested at 30mm.
SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band-edge
channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with
the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must
coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data demonstrating
compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.10W/kg and 1.50W/kg respectively.
Addition of a new antenna, antenna type is different with the original application. (Antenna type: Monopole Antenna P/N 260-25083) tested at 30mm.
SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product
procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or
similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM
integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must
be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose
to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.50W/kg respectively.
Addition of a new antenna, antenna type is different with the original application. (Antenna type: Monopole Antenna P/N 260-25083) tested at 30mm.
SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and
SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.59 W/kg respectively.
This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this
transmitter must not transmit simultaneously with any other antenna or transmitter, except in
accordance with FCC multitransmitter product procedures. Grantee must provide installation
and operating instructions for complying with FCC multi-transmitter product procedures. Only
those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be
used with this transmitter. End-users and installers must be provided with transmitter
operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.24W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 1.24W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When
all conditions of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance, or a new
application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client
only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in
this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions
and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.63W/kg and 1.24W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
| various | Is there an equipment authorization waiver associated with this application? | No |
| various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
various
|
Firm Name |
Intel Corporation S.A.S.
|
|
various
|
BV CPS ADT Korea Ltd.
|
|
various
|
Eurofins KCTL Co., Ltd.
|
|
various
|
SPORTON International Inc.
|
|
various
|
KCTL INC
|
|
various
|
Name |
N**** A********
|
|
various
|
M**** S******
|
|
various
|
S******** L****
|
|
various
|
A****** C****
|
|
various
|
S******** L******
|
|
various
|
Telephone Number |
00334********
|
|
various
|
+82-7********
|
|
various
|
+82-3********
|
|
various
|
+886-******** Extension:
|
|
various
|
+82-3********
|
|
various
|
00334********
|
|
various
|
Fax Number |
+82-3********
|
|
various
|
+82-5********
|
|
various
|
00334********
|
|
various
|
E-mail |
n******@intel.com
|
|
various
|
M******@kr.bureauveritas.com
|
|
various
|
s******@kctl.co.kr
|
|
various
|
a******@sporton.com.tw
|
|