FCC ID: PD9AX211NG

FCC equipment application details

Intel Wi-Fi 6E AX211 AX211NG

Intel Corporation

Application Exhibits

ID Label/Location Infos

frequency equipment class purpose
1 2024-03-11 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II Permissive Change
2 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
3 2422 ~ 2462 DTS - Digital Transmission System
4 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
5 2024-03-08 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
6 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
7 2422 ~ 2462 DTS - Digital Transmission System
8 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
9 2024-02-26 2422 ~ 2462 DTS - Digital Transmission System
10 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
11 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
12 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
13 2024-02-23 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
14 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
15 2422 ~ 2462 DTS - Digital Transmission System
16 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
17 2024-02-20 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
18 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
19 2422 ~ 2462 DTS - Digital Transmission System
20 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
21 2024-02-16 2422 ~ 2462 DTS - Digital Transmission System Class II permissive change or modification of presently authorized equipment
22 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
23 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
24 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
25 2024-02-15 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II Permissive Change
26 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
27 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
28 2422 ~ 2462 DTS - Digital Transmission System
29 2024-02-08 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
30 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
31 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
32 2422 ~ 2462 DTS - Digital Transmission System
33 2024-02-01 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
34 2422 ~ 2462 DTS - Digital Transmission System
35 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
36 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
37 2024-01-24 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
38 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
39 2422 ~ 2462 DTS - Digital Transmission System
40 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
41 2024-01-12 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
42 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
43 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
44 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
45 2422 ~ 2462 DTS - Digital Transmission System
46 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
47 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
48 2422 ~ 2462 DTS - Digital Transmission System
49 2024-01-05 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
50 2422 ~ 2462 DTS - Digital Transmission System
51 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
52 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
53 2024-01-03 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
54 2422 ~ 2462 DTS - Digital Transmission System
55 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
56 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
57 2023-12-21 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
58 2422 ~ 2462 DTS - Digital Transmission System
59 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
60 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
61 2023-12-17 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
62 2422 ~ 2462 DTS - Digital Transmission System
63 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
64 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
65 2023-12-13 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
66 2422 ~ 2462 DTS - Digital Transmission System
67 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
68 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
69 2023-12-10 2422 ~ 2462 DTS - Digital Transmission System
70 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
71 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
72 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
73 2023-11-29 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
74 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
75 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
76 2422 ~ 2462 DTS - Digital Transmission System
77 2023-11-27 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX Class II permissive change or modification of presently authorized equipment
78 2422 ~ 2462 DTS - Digital Transmission System
79 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
80 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
81 2023-11-23 2422 ~ 2462 DTS - Digital Transmission System
82 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
83 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
84 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
85 2023-10-16 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX Class II Permissive Change
86 2023-09-13 2422 ~ 2462 DTS - Digital Transmission System
87 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
88 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
89 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
90 2023-09-10 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
91 2422 ~ 2462 DTS - Digital Transmission System
92 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
93 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
94 2023-08-14 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
95 2023-05-31 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
96 2023-05-30 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
97 2023-05-24 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
98 2023-05-19 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX Class II permissive change or modification of presently authorized equipment
99 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
100 2023-05-10 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
101 2023-04-21 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
102 2023-04-03 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client Class II Permissive Change
103 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
104 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
105 2422 ~ 2462 DTS - Digital Transmission System Class II permissive change or modification of presently authorized equipment
106 2023-03-31 2422 ~ 2462 DTS - Digital Transmission System Class II Permissive Change
107 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
108 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
109 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
110 2023-03-29 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX Class II permissive change or modification of presently authorized equipment
111 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
112 2422 ~ 2462 DTS - Digital Transmission System
113 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
114 2023-03-27 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client Class II Permissive Change
115 2422 ~ 2462 DTS - Digital Transmission System
116 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
117 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
118 2023-03-24 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
119 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
120 2422 ~ 2462 DTS - Digital Transmission System Class II permissive change or modification of presently authorized equipment
121 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II Permissive Change
122 2023-03-22 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
123 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
124 2422 ~ 2462 DTS - Digital Transmission System
125 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
126 2023-03-20 2422 ~ 2462 DTS - Digital Transmission System Class II permissive change or modification of presently authorized equipment
127 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
128 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
129 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
130 2023-03-17 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II Permissive Change
131 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
132 2422 ~ 2462 DTS - Digital Transmission System
133 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
134 2023-03-16 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX Class II permissive change or modification of presently authorized equipment
135 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
136 2422 ~ 2462 DTS - Digital Transmission System
137 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
138 2023-03-15 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
139 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
140 2422 ~ 2462 DTS - Digital Transmission System
141 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
142 2023-03-09 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
143 2422 ~ 2462 DTS - Digital Transmission System
144 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
145 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
146 2023-03-07 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
147 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
148 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
149 2422 ~ 2462 DTS - Digital Transmission System
150 2023-03-06 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
151 2422 ~ 2462 DTS - Digital Transmission System
152 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
153 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
154 2023-03-04 2422 ~ 2462 DTS - Digital Transmission System
155 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
156 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
157 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
158 2023-03-03 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
159 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
160 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
161 2422 ~ 2462 DTS - Digital Transmission System
162 2023-03-02 2422 ~ 2462 DTS - Digital Transmission System
163 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
164 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
165 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
166 2023-02-27 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
167 2422 ~ 2462 DTS - Digital Transmission System
168 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
169 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
170 2023-02-15 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
171 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
172 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
173 2422 ~ 2462 DTS - Digital Transmission System
174 2023-02-14 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
175 2422 ~ 2462 DTS - Digital Transmission System
176 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
177 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
178 2023-02-13 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
179 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
180 2422 ~ 2462 DTS - Digital Transmission System
181 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
182 2023-02-12 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
183 2023-02-10 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
184 2422 ~ 2462 DTS - Digital Transmission System
185 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
186 2023-02-09 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
187 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
188 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
189 2422 ~ 2462 DTS - Digital Transmission System
190 2023-02-08 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
191 2023-02-07 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
192 2422 ~ 2462 DTS - Digital Transmission System
193 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
194 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
195 2023-02-03 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
196 2422 ~ 2462 DTS - Digital Transmission System
197 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
198 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
199 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
200 2023-02-01 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
201 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
202 2422 ~ 2462 DTS - Digital Transmission System
203 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
204 2023-01-30 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
205 2023-01-19 5500 ~ 5700 NII - Unlicensed National Information Infrastructure TX Class II Permissive Change
206 2023-01-17 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX Class II permissive change or modification of presently authorized equipment
207 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client Class II Permissive Change
208 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II permissive change or modification of presently authorized equipment
209 2422 ~ 2462 DTS - Digital Transmission System
210 2023-01-10 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
211 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
212 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
213 2422 ~ 2462 DTS - Digital Transmission System
214 2023-01-09 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II Permissive Change
215 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
216 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
217 2422 ~ 2462 DTS - Digital Transmission System
218 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
219 2023-01-06 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
220 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
221 2422 ~ 2462 DTS - Digital Transmission System
222 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
223 2023-01-05 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
224 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
225 2422 ~ 2462 DTS - Digital Transmission System
226 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
227 2023-01-03 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
228 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
229 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
230 2422 ~ 2462 DTS - Digital Transmission System
231 2022-11-18 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
232 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
233 2022-08-29 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
234 2022-08-23 2422 ~ 2462 DTS - Digital Transmission System
235 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
236 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
237 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
238 2022-07-04 2442 ~ 2462 DTS - Digital Transmission System
239 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
240 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
241 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
242 2022-07-01 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
243 2022-06-30 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
244 2422 ~ 2462 DTS - Digital Transmission System
245 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
246 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
247 2022-06-02 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
248 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
249 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
250 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
251 2422 ~ 2462 DTS - Digital Transmission System
252 2022-05-20 2422 ~ 2462 DTS - Digital Transmission System
253 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
254 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
255 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
256 2022-05-17 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
257 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
258 2422 ~ 2462 DTS - Digital Transmission System
259 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
260 2022-05-16 2422 ~ 2462 DTS - Digital Transmission System
261 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
262 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
263 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
264 2022-05-11 2422 ~ 2462 DTS - Digital Transmission System
265 2422 ~ 2462 DTS - Digital Transmission System
266 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
267 2422 ~ 2462 DTS - Digital Transmission System
268 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
269 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
270 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
271 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
272 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
273 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
274 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
275 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
276 2022-04-28 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
277 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
278 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
279 2422 ~ 2462 DTS - Digital Transmission System
280 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
281 2422 ~ 2462 DTS - Digital Transmission System
282 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
283 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
284 2022-04-22 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
285 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
286 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
287 2422 ~ 2462 DTS - Digital Transmission System
288 2022-04-19 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
289 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
290 2422 ~ 2462 DTS - Digital Transmission System
291 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
292 2022-04-18 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
293 2422 ~ 2462 DTS - Digital Transmission System
294 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
295 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
296 2022-04-13 2422 ~ 2462 DTS - Digital Transmission System
297 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
298 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
299 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
300 2022-04-11 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
301 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
302 2422 ~ 2462 DTS - Digital Transmission System
303 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
304 2022-04-06 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
305 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
306 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
307 2422 ~ 2462 DTS - Digital Transmission System
308 2022-03-29 2422 ~ 2462 DTS - Digital Transmission System
309 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
310 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
311 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
312 2422 ~ 2462 DTS - Digital Transmission System
313 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
314 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
315 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
316 2022-03-28 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
317 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
318 2422 ~ 2462 DTS - Digital Transmission System
319 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
320 2022-03-25 2422 ~ 2462 DTS - Digital Transmission System Class II permissive change or modification of presently authorized equipment
321 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
322 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
323 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
324 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
325 2422 ~ 2462 DTS - Digital Transmission System
326 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
327 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
328 2022-03-23 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client Class II Permissive Change
329 2422 ~ 2462 DTS - Digital Transmission System
330 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
331 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
332 2022-03-21 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
333 2422 ~ 2462 DTS - Digital Transmission System
334 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
335 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
336 2022-03-16 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
337 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
338 2422 ~ 2462 DTS - Digital Transmission System
339 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
340 2022-03-11 2422 ~ 2462 DTS - Digital Transmission System
341 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
342 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
343 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
344 2022-03-09 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
345 2422 ~ 2462 DTS - Digital Transmission System
346 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
347 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
348 2022-03-08 2422 ~ 2462 DTS - Digital Transmission System
349 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
350 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
351 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
352 2022-03-07 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
353 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
354 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
355 2422 ~ 2462 DTS - Digital Transmission System
356 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
357 2422 ~ 2462 DTS - Digital Transmission System
358 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
359 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
360 2022-03-04 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client Class II permissive change or modification of presently authorized equipment
361 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
362 2422 ~ 2462 DTS - Digital Transmission System
363 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
364 2022-03-03 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
365 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
366 2422 ~ 2462 DTS - Digital Transmission System
367 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
368 2022-02-28 2422 ~ 2462 DTS - Digital Transmission System Class II Permissive Change
369 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
370 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
371 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
372 2022-01-31 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
373 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
374 2422 ~ 2462 DTS - Digital Transmission System
375 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
376 2022-01-26 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
377 2422 ~ 2462 DTS - Digital Transmission System
378 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
379 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
380 2022-01-25 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
381 2422 ~ 2462 DTS - Digital Transmission System
382 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
383 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
384 2022-01-20 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX Class II permissive change or modification of presently authorized equipment
385 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
386 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
387 2422 ~ 2462 DTS - Digital Transmission System
388 2022-01-14 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client Class II Permissive Change
389 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
390 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
391 2422 ~ 2462 DTS - Digital Transmission System
392 2021-12-22 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II permissive change or modification of presently authorized equipment
393 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
394 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
395 2422 ~ 2462 DTS - Digital Transmission System
396 2021-12-17 2422 ~ 2462 DTS - Digital Transmission System Class II Permissive Change
397 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
398 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
399 2021-12-10 2422 ~ 2462 DTS - Digital Transmission System
400 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
401 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
402 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
403 2021-11-30 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
404 2021-11-03 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
405 2021-10-28 2422 ~ 2462 DTS - Digital Transmission System
406 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
407 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
408 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
409 2021-09-02 2422 ~ 2462 DTS - Digital Transmission System
410 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
411 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
412 2021-08-31 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
413 2422 ~ 2462 DTS - Digital Transmission System
414 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
415 2021-07-01 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
416 2422 ~ 2462 DTS - Digital Transmission System
417 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
418 2021-06-28 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
419 2422 ~ 2462 DTS - Digital Transmission System
420 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
421 2021-04-26 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client Original Equipment
422 2021-02-17 JBP - Part 15 Class B Computing Device Peripheral
423 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
424 2422 ~ 2462 DTS - Digital Transmission System
425 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
app s submitted / available
various AX211NGW host label P132F ID Label/Location Info pdf 100.46 KiB March 11 2024
various AX211NGW host label P186G ID Label/Location Info pdf 101.81 KiB February 22 2024 / February 23 2024
various AX211NGW E-label Regency TPN-C176 ID Label/Location Info pdf 181.53 KiB February 20 2024
various Label and Location ID Label/Location Info pdf 149.48 KiB February 16 2024
various Longbay Label Location for FCC&IC (AX211NGW) r1 ID Label/Location Info pdf 78.56 KiB March 08 2024
various ThinkBook 14 2-IN-1 G4 IML AX211NGW label illustration ID Label/Location Info pdf 63.70 KiB February 23 2024 / February 26 2024
various 231113-02.TR01 FCC IC WLAN SAR Legacy Dell P132F RF Exposure Info pdf 1.64 MiB March 11 2024
various 231113-02.TR01 FCC IC WLAN SAR Legacy Dell P132F Annex E RF Exposure Info pdf 2.10 MiB March 11 2024
various 231113-02.TR01 FCC IC WLAN SAR Legacy Dell P132F Annex F Test Setup Photos pdf March 11 2024 / September 07 2024 delayed release
various Attestation Letter Per KDB 986446 2.911(d)(5) Attestation Statements pdf 89.26 KiB March 11 2024
various C2PC letter AX211NGW 186 Rev01 Cover Letter(s) pdf 612.00 KiB March 11 2024
various FCC Agent for Service of Process Intel - BL-RP October 26 2023 Attestation Statements pdf 95.08 KiB March 11 2024
various FCC-Modular-Letter-AX211NGW 186 Cover Letter(s) pdf 338.75 KiB March 11 2024
various FCC Confidentiality 186 Cover Letter(s) pdf 691.08 KiB March 11 2024
various P132F Dell WLAN Antenna report NB SPEED 20231103-1 Test Report pdf 1.05 MiB March 11 2024
various P132F Dell WLAN Antenna report NB SPEED 20231103-2 Test Setup Photos pdf March 11 2024 / September 07 2024 delayed release
various Regulatory Mockument Template-WW-A11-Inspiron 16 Plus 7640 DIS Users Manual pdf March 11 2024 / September 07 2024 delayed release
various statement website Users Manual pdf March 11 2024 / September 07 2024 delayed release
various unitedstates wirelesstext us 6G Users Manual pdf March 11 2024 / September 07 2024 delayed release
various 231113-02.TR02 FCC WLAN SAR 6E Dell P132F RF Exposure Info pdf 2.49 MiB March 11 2024
various 231113-02.TR02 FCC WLAN SAR 6E Dell P132F Annex E RF Exposure Info pdf 2.31 MiB March 11 2024
various 231113-02.TR02 FCC WLAN SAR 6E Dell P132F Annex F Test Setup Photos pdf March 11 2024 / September 07 2024 delayed release
various 210504 DPCSA Op Report FCC AX201D2W Rev04 Operational Description pdf March 11 2024 confidential
various 231113-02.TR04 FCC WLAN TAS Dell P132F RF Exposure Info pdf 516.47 KiB March 11 2024
various Intel DPCSA Declaration - RevD Cover Letter(s) pdf 212.00 KiB March 11 2024
various 240205-01.TR01 - HP TPN-W157 G sensor RF Exposure Info pdf 409.45 KiB March 08 2024
various 240205-01.TR04 FCC WLAN TAS HP TPN-W157 RF Exposure Info pdf 699.08 KiB March 08 2024
various 240205-01.TR06 FCC IC WLAN SAR Legacy HP TPN W157 RF Exposure Info pdf 1.69 MiB March 08 2024
various 240205-01.TR06 FCC IC WLAN SAR Legacy HP TPN W157 Annex E RF Exposure Info pdf 1.36 MiB March 08 2024
various C2PC letter AX211NGW 188 r1 Cover Letter(s) pdf 602.55 KiB March 08 2024
various Longbay Agency report WLAN HP (202209) INPAQ Intel 20240304-1 Test Report pdf 2.19 MiB March 08 2024
various Longbay Antenna report WLAN HP (202209) HTK Intel 20240304-1 Test Report pdf 2.49 MiB March 08 2024
various 240205-01.TR02 FCC WLAN SAR 6E HP TPN-W157 RF Exposure Info pdf 2.26 MiB March 08 2024
various 240205-01.TR02 FCC WLAN SAR 6E HP TPN-W157 Annex F RF Exposure Info pdf 2.33 MiB March 08 2024
various 200611-01.TR09 - FCC-ISED, WLAN LOW SKU, AX211NGW RF Exposure Info pdf 4.14 MiB February 23 2024 / February 26 2024
various 231213-01.TR01 - Lenovo ThinkBook 14 2-in-1 G4 IML G sensor RF Exposure Info pdf 403.07 KiB February 23 2024 / February 26 2024
various 231213-01.TR02 FCC IC WLAN SAR Lenovo ThinkBook 14 2-in-1 G4 IML RF Exposure Info pdf 1.76 MiB February 23 2024 / February 26 2024
various 231213-01.TR02 FCC IC WLAN SAR Lenovo ThinkBook 14 2-in-1 G4 IML Annex E RF Exposure Info pdf 2.90 MiB February 23 2024 / February 26 2024
various C2PC letter AX211NGW 173 Cover Letter(s) pdf 1.47 MiB February 23 2024 / February 26 2024
various ThinkBook 14 2-in-1 G4 IML Antenna AWAN antenna info Test Report pdf 1.02 MiB February 23 2024 / February 26 2024
various ThinkBook 14 2-in-1 G4 IML Antenna Luxshare-ICT antenna info Test Report pdf 1.16 MiB February 23 2024 / February 26 2024
various 210923-01.TR01- FCC, WLAN - SAR - WiFi 6E-Low Sku, AX211NGW RF Exposure Info pdf 2.75 MiB February 23 2024 / February 26 2024
various 210923-01.TR01- FCC, WLAN - SAR - WiFi 6E-Low Sku, AX211NGW, Certificates RF Exposure Info pdf 3.20 MiB February 23 2024 / February 26 2024
various 231213-01.TR03 FCC WLAN SAR 6E Lenovo ThinkBook 14 2-in-1 G4 IML RF Exposure Info pdf 2.34 MiB February 23 2024 / February 26 2024
various 231213-01.TR03 FCC WLAN SAR 6E Lenovo ThinkBook 14 2-in-1 G4 IML Annex E RF Exposure Info pdf 2.33 MiB February 23 2024 / February 26 2024
various 200611-01.TR09 - FCC-ISED, WLAN LOW SKU, AX211NGW, Annex F Test Setup Photos pdf February 22 2024 / August 22 2024 delayed release
various 200611-01.TR10 - FCC-ISED, WLAN MID SKU, AX211NGW RF Exposure Info pdf 4.14 MiB February 22 2024 / February 23 2024
various 200611-01.TR10 - FCC-ISED, WLAN MID SKU, AX211NGW, Annex F Test Setup Photos pdf February 22 2024 / August 22 2024 delayed release
various 220915-01.TR01-FCC SAR WLAN AX211NGW Low Sku Annex E RF Exposure Info pdf 2.69 MiB February 22 2024 / February 23 2024
various 220915-01.TR01-FCC SAR WLAN AX211NGW Low Sku Annex F Test Setup Photos pdf February 22 2024 / August 22 2024 delayed release
various 220915-01.TR01-FCC SAR WLAN AX211NGW Low Sku UNII4 RF Exposure Info pdf 1.00 MiB February 22 2024 / February 23 2024
various 231020-01.TR01 FCC IC WLAN SAR Legacy Dell P186G RF Exposure Info pdf 1.66 MiB February 22 2024 / February 23 2024
various 231020-01.TR01 FCC IC WLAN SAR Legacy Dell P186G Annex E RF Exposure Info pdf 2.12 MiB February 22 2024 / February 23 2024
various 231020-01.TR01 FCC IC WLAN SAR Legacy Dell P186G Annex F Test Setup Photos pdf February 22 2024 / August 22 2024 delayed release
various C2PC letter AX211NGW 172 Cover Letter(s) pdf 840.33 KiB February 22 2024 / February 23 2024
various FCC Confidentiality 172 Cover Letter(s) pdf 734.28 KiB February 22 2024 / February 23 2024
various Inquiry for SAR test plan reduction - Concept Operational Description pdf February 22 2024 confidential
various Inquiry for SAR test plan reduction - test data analysis Operational Description pdf February 22 2024 confidential
various KDB Inquiry history Operational Description pdf February 22 2024 confidential
various P186G Dell Antenna report template 20231016 HB Test Report pdf 5.36 MiB February 22 2024 / February 23 2024
various P186G Dell Antenna report template 20231016 HB Annex(Photo) Test Setup Photos pdf February 22 2024 / August 22 2024 delayed release
various Quick Start Guide Users Manual pdf February 22 2024 / August 22 2024 delayed release
various 210910-01.TR01- FCC WLAN - SAR - WiFi 6E-MidSku AX211NGW RF Exposure Info pdf 2.87 MiB February 22 2024 / February 23 2024
various 210910-01.TR01- FCC WLAN - SAR - WiFi 6E-MidSku AX211NGW, Certificates RF Exposure Info pdf 3.20 MiB February 22 2024 / February 23 2024
various 210910-01.TR01- FCC WLAN - SAR - WiFi 6E-MidSku AX211NGW, Photographs Test Setup Photos pdf February 22 2024 / August 22 2024 delayed release
various 231020-01.TR02 FCC WLAN SAR 6E Dell P186G RF Exposure Info pdf 2.43 MiB February 22 2024 / February 23 2024
various 231020-01.TR02 FCC WLAN SAR 6E Dell P186G Annex E RF Exposure Info pdf 2.32 MiB February 22 2024 / February 23 2024
various 231020-01.TR02 FCC WLAN SAR 6E Dell P186G Annex F Test Setup Photos pdf February 22 2024 / August 22 2024 delayed release
various
RF Exposure Info pdf February 22 2024 / February 23 2024
various
RF Exposure Info pdf February 22 2024 / February 23 2024
various 231024-09.TR01 FCC IC WLAN SAR Legacy HP TPN-C176 Rev02 RF Exposure Info pdf 1.66 MiB February 20 2024
various 231024-09.TR01 FCC IC WLAN SAR Legacy HP TPN-C176 Rev02 Annex E RF Exposure Info pdf 2.11 MiB February 20 2024
various 231024-09.TR01 FCC IC WLAN SAR Legacy HP TPN-C176 Rev02 Annex F Test Setup Photos pdf February 20 2024 / August 19 2024 delayed release
various 231024-09.TR04 FCC WLAN TAS HP TPN-C176 AX211NGW RF Exposure Info pdf 512.92 KiB February 20 2024
various C2PC letter AX211NGW 176 Rev01 Cover Letter(s) pdf 424.42 KiB February 20 2024
various N25728-004 (English) Users Manual pdf February 20 2024 / August 19 2024 delayed release
various UG-EN-M19507-001 Oct 2020 compressed Users Manual pdf February 20 2024 / August 19 2024 delayed release
various WLAN antenna report (Annex) Regency Hong-Bo Intel 20231016 Test Setup Photos pdf February 20 2024 / August 19 2024 delayed release
various WLAN antenna report (Annex) Regency INPAQ Intel 20231013 Test Setup Photos pdf February 20 2024 / August 19 2024 delayed release
various WLAN antenna report (Annex) Regency WNC Intel 20231017 Test Setup Photos pdf February 20 2024 / August 19 2024 delayed release
various WLAN antenna report Regency Hong-Bo Intel 20240207 Test Report pdf 1.20 MiB February 20 2024
various WLAN antenna report Regency INPAQ Intel 20240207 Test Report pdf 938.72 KiB February 20 2024
various WLAN antenna report Regency WNC Intel 20240207 Test Report pdf 1.12 MiB February 20 2024
various 231024-09.TR02 FCC WLAN SAR 6E HP TPN-C176 Rev01 RF Exposure Info pdf 2.44 MiB February 20 2024
various 231024-09.TR02 FCC WLAN SAR 6E HP TPN-C176 Rev01 Annex E RF Exposure Info pdf 2.32 MiB February 20 2024
various 231024-09.TR02 FCC WLAN SAR 6E HP TPN-C176 Rev01 Annex F Test Setup Photos pdf February 20 2024 / August 19 2024 delayed release
various 231128-01.TR01 - HP HSN-I61C AX211NGW Gsensor Test Report pdf 551.97 KiB February 16 2024
various 231128-01.TR02 FCC IC WLAN SAR Legacy HP TPN-I61C AX211NGW RF Exposure Info pdf 1.54 MiB February 16 2024
various 231128-01.TR02 FCC IC WLAN SAR Legacy HP TPN-I61C AX211NGW Annex E RF Exposure Info pdf 2.11 MiB February 16 2024
various 231128-01.TR05 FCC WLAN TAS HP HSN-I61C AX211NGW Rev01 Test Report pdf 348.35 KiB February 16 2024
various Attestation Covered List Attestation Statements pdf 177.47 KiB February 16 2024
various ErnestoX WLAN Agency report WLAN SKU HB NB 20231113 Test Report pdf 286.36 KiB February 16 2024
various FCC Permisive Change Letter Cover Letter(s) pdf 990.41 KiB February 16 2024
various Internal Photos Internal Photos pdf February 16 2024 / August 14 2024 delayed release
various TempConfidential 231128-01.TR02 FCC IC WLAN SAR Legacy HP TPN-I61C AX211NGW Anne Test Setup Photos pdf February 16 2024 / August 14 2024 delayed release
various TempConfidential ErnestoX WLAN Agency report WLAN SKU HB NB 20231113 Photos Test Setup Photos pdf February 16 2024 / August 14 2024 delayed release
various TempConfidential ErnestoX WLAN Agency report WLAN SKU HB TB 20231123 Photos Test Setup Photos pdf February 16 2024 / August 14 2024 delayed release
various TempConfidential ErnestoX WLAN Agency report WLAN SKU WNC NB 20231127 Photos Test Setup Photos pdf February 16 2024 / August 14 2024 delayed release
various TempConfidential ErnestoX WLAN Agency report WLAN SKU WNC TB 20231113 Photos Test Setup Photos pdf February 16 2024 / August 14 2024 delayed release
various TempConfidential RG-EN-L25269-009 Dec 2021 Users Manual pdf February 16 2024 / August 14 2024 delayed release
various TempConfidential UG-EN-M19507-001 Oct 2020 Users Manual pdf February 16 2024 / August 14 2024 delayed release

Application Forms

app s Applicant Information
various Effective 2024-03-11
various 2024-03-08
various 2024-02-26
various 2024-02-23
various 2024-02-20
various 2024-02-16
various 2024-02-15
various 2024-02-08
various 2024-02-01
various 2024-01-24
various 2024-01-12
various 2024-01-05
various 2024-01-03
various 2023-12-21
various 2023-12-17
various 2023-12-13
various 2023-12-10
various 2023-11-29
various 2023-11-27
various 2023-11-23
various 2023-10-16
various 2023-09-13
various 2023-09-10
various 2023-08-14
various 2023-05-31
various 2023-05-30
various 2023-05-24
various 2023-05-19
various 2023-05-10
various 2023-04-21
various 2023-04-03
various 2023-03-31
various 2023-03-29
various 2023-03-27
various 2023-03-24
various 2023-03-22
various 2023-03-20
various 2023-03-17
various 2023-03-16
various 2023-03-15
various 2023-03-09
various 2023-03-07
various 2023-03-06
various 2023-03-04
various 2023-03-03
various 2023-03-02
various 2023-02-27
various 2023-02-15
various 2023-02-14
various 2023-02-13
various 2023-02-12
various 2023-02-10
various 2023-02-09
various 2023-02-08
various 2023-02-07
various 2023-02-03
various 2023-02-01
various 2023-01-30
various 2023-01-19
various 2023-01-17
various 2023-01-10
various 2023-01-09
various 2023-01-06
various 2023-01-05
various 2023-01-03
various 2022-11-18
various 2022-08-29
various 2022-08-23
various 2022-07-04
various 2022-07-01
various 2022-06-30
various 2022-06-02
various 2022-05-20
various 2022-05-17
various 2022-05-16
various 2022-05-11
various 2022-04-28
various 2022-04-22
various 2022-04-19
various 2022-04-18
various 2022-04-13
various 2022-04-11
various 2022-04-06
various 2022-03-29
various 2022-03-28
various 2022-03-25
various 2022-03-23
various 2022-03-21
various 2022-03-16
various 2022-03-11
various 2022-03-09
various 2022-03-08
various 2022-03-07
various 2022-03-04
various 2022-03-03
various 2022-02-28
various 2022-01-31
various 2022-01-26
various 2022-01-25
various 2022-01-20
various 2022-01-14
various 2021-12-22
various 2021-12-17
various 2021-12-10
various 2021-11-30
various 2021-11-03
various 2021-10-28
various 2021-09-02
various 2021-08-31
various 2021-07-01
various 2021-06-28
various 2021-04-26
various 2021-02-17
various Applicant's complete, legal business name Intel Corporation
various FCC Registration Number (FRN) 0033159344
various 0008035131
various Physical Address 425 rue de Goa Le Cargo B6
various 100 Center Point Circle Suite 200
various 425 rue de Goa
various 100 Center Point Circle
various Antibes, N/A
various Antibes, N/A 06600
various Columbia, SC
various Columbia, South Carolina 29210
various Columbia
various France
various United States
app s TCB Information
various TCB Application Email Address Q******@sporton-usa.com
various M******@sporton-usa.com
various h******@acbcert.com
various K******@sporton-usa.com
various b******@intel.com
various K******@sporton-usa.com
various h******@ACBcert.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code PD9
various Equipment Product Code AX211NG
app s Person at the applicant's address to receive grant or for contact
various Name B**** L********
various S****** C******** H******
various Title Regulatory Engineer
various Product Regulations Engineer
various Telephone Number 04930********
various 803-3********
various Fax Number 04930********
various 803-2********
various E-mail b******@intel.com
various s******@intel.com
app s Technical Contact
various Firm Name Intel Corporation
various Intel Mobile Communications
various Name B**** L********
various S**** C******** H********
various S****** H******
various Physical Address 425 rue de Goa
various 100 Center Point Circle
various 100 center Point Circle
various 100 Center Point Circle Suite 200
various 100 Center Point Circle Sute 200
various Columbia
various Antibes, 06600
various Columbia, 29212
various Columbia, 29210
various Columbia, South Carolina 29210
various 29210
various Columbia, South Carolina
various France
various United States
various Telephone Number +3349********
various 04930********
various 80321********
various 80331********
various 98032********
various E-mail b******@intel.com
various s******@intel.com
various g******@intel.com
app s Non Technical Contact
various Firm Name Intel Corporation
various Name B**** L********
various G****** C********
various G**** C****** C******
various Physical Address 425 rue de Goa
various Antibes, 06600
various Antibes, 29212
various Antibes, 0
various Antebes, 06600
various France
various United States
various Telephone Number +3349********
various 04930********
various 80321********
various 33493********
various E-mail b******@intel.com
various g******@intel.com
various B******@intel.com
various g******@catala@intel.com
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)09/07/2024
various09/05/2024
various08/25/2024
various08/22/2024
various08/19/2024
various08/14/2024
various08/07/2024
various07/31/2024
various07/21/2024
various07/11/2024
various07/03/2024
various07/02/2024
various06/19/2024
various06/15/2024
various06/11/2024
various06/08/2024
various05/28/2024
various05/26/2024
various05/22/2024
various04/13/2024
various03/12/2024
various03/08/2024
various11/28/2023
various11/27/2023
various11/20/2023
various11/15/2023
various11/16/2023
various10/19/2023
various09/30/2023
various09/27/2023
various09/25/2023
various09/23/2023
various09/20/2023
various09/19/2023
various09/16/2023
various09/13/2023
various09/12/2023
various09/11/2023
various09/06/2023
various09/04/2023
various09/02/2023
various09/01/2023
various08/31/2023
various08/30/2023
various08/13/2023
various08/14/2023
various08/12/2023
various08/10/2023
various08/07/2023
various08/03/2023
various07/31/2023
various07/18/2023
various07/10/2023
various07/09/2023
various07/06/2023
various07/05/2023
various04/29/2023
various05/06/2023
various01/01/2023
various12/27/2022
various11/29/2022
various11/26/2022
various11/28/2022
various11/16/2022
various11/13/2022
various11/12/2022
various11/07/2022
various10/25/2022
various10/18/2022
various10/16/2022
various10/15/2022
various10/10/2022
various10/08/2022
various10/03/2022
various09/25/2022
various09/24/2022
various09/21/2022
various09/19/2022
various09/17/2022
various09/12/2022
various09/07/2022
various09/05/2022
various09/04/2022
various09/03/2022
various08/31/2022
various08/30/2022
various08/29/2022
various08/27/2022
various07/30/2022
various07/25/2022
various07/24/2022
various07/19/2022
various07/12/2022
various06/18/2022
various06/20/2022
various06/14/2022
various06/08/2022
various05/28/2022
various05/02/2022
various04/25/2022
various03/01/2022
various02/27/2022
various12/28/2021
various12/16/2021
various12/25/2021
various10/16/2021
various08/15/2021
various08/10/2021
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassDSS - Part 15 Spread Spectrum Transmitter
various6XD - 15E 6 GHz Low Power Indoor Client
variousDTS - Digital Transmission System
variousNII - Unlicensed National Information Infrastructure TX
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Intel Wi-Fi 6E AX211
variousIntel AX211
variousIntel Wi-Fi 6 AX211
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousYes
variousModular Equipment TypeSingle Modular Approval
variousDoes not apply
variousPurpose / Application is forClass II Permissive Change
variousClass II permissive change or modification of presently authorized equipment
variousOriginal Equipment
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC establishes portable category SAR conditions for the Dell model P132F Notebook PC. The highest reported Body and Simultaneous SAR values are 0.22 W/kg and 1.30 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. This C2PC establishes portable category SAR conditions for the Dell model P132F Notebook PC. The highest reported Body and Simultaneous SAR values are 1.08 W/kg and 1.30 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC establishes portable category SAR conditions for the Dell model P132F Notebook PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 0.72 W/kg and 1.21 W/kg respectively.
variousPower Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC establishes portable category SAR conditions for the Dell model P132F Notebook PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 0.51 W/kg and 1.26 W/kg respectively.
variousPower Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC establishes portable category SAR conditions for the HP model TPN-W157 convertible PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 0.72 W/kg and 1.49 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. This C2PC establishes portable category SAR conditions for the HP model TPN-W157 convertible PC. The highest reported Body and Simultaneous SAR values are 0.75 W/kg and 1.46 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC establishes portable category SAR conditions for the HP model TPN-W157 convertible PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 0.54 W/kg and 1.07 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC establishes portable category SAR conditions for the HP model TPN-W157 convertible PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.49 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Lenovo model ThinkBook 14 2-in-1 G4 IML convertible PC. The highest reported Body and Simultaneous SAR values are 1.18 W/kg and 1.45 W/kg respectively.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. This change establishes portable category SAR conditions for the Lenovo model ThinkBook 14 2-in-1 G4 IML convertible PC. The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.46 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Lenovo model ThinkBook 14 2-in-1 G4 IML convertible PC. The highest reported Body and Simultaneous SAR values are 0.27 W/kg and 1.46 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. This change establishes portable category SAR conditions for the Lenovo model ThinkBook 14 2-in-1 G4 IML convertible PC. The highest reported Body and Simultaneous SAR values are 1.50 W/kg and 1.51 W/kg respectively.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. This change establishes portable category SAR conditions for the Dell model P186G convertible PC. The highest reported Body and Simultaneous SAR values are 1.20 W/kg and 1.26 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. This change establishes portable category SAR conditions for the Dell model P186G convertible PC. The highest reported Body and Simultaneous SAR values are 0.80 W/kg and 1.33 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P186G convertible PC. The highest reported Body and Simultaneous SAR values are 0.47 W/kg and 0.84 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P186G convertible PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.26 W/kg respectively.
variousPower Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC establishes portable category SAR conditions for the HP model TPN-C176 Notebook PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.56 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. This C2PC establishes portable category SAR conditions for the HP model TPN-C176 Notebook PC. The highest reported Body and Simultaneous SAR values are 0.32 W/kg and 0.57 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC establishes portable category SAR conditions for the HP model TPN-C176 Notebook PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 0.32 W/kg and 0.59 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC establishes portable category SAR conditions for the HP model TPN-C176 Notebook PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.56 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.41W/kg and 0.78W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I61C. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.32W/kg and 0.78W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I61C. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.78 W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I61C. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 0.78W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I61C. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC establishes portable category SAR conditions for the HP model TPN-C174 convertible PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.27 W/kg respectively.
variousPower Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC establishes portable category SAR conditions for the HP model TPN-C174 convertible PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.27 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. This C2PC establishes portable category SAR conditions for the HP model TPN-C174 convertible PC. The highest reported Body and Simultaneous SAR values are 0.56 W/kg and 1.08 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC establishes portable category SAR conditions for the HP model TPN-C174 convertible PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 1.16 W/kg and 1.24 W/kg respectively.
variousPower Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC establishes portable category SAR conditions for the HP model TPN-C172 convertible PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 1.20 W/kg and 1.26 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. This C2PC establishes portable category SAR conditions for the HP model TPN-C172 convertible PC. The highest reported Body and Simultaneous SAR values are 0.78 W/kg and 1.49 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC establishes portable category SAR conditions for the HP model TPN-C172 convertible PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.49 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC establishes portable category SAR conditions for the HP model TPN-C172 convertible PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 0.91 W/kg and 0.91 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. This C2PC establishes portable category SAR conditions for the Dell model P133F convertible PC. The highest reported Body and Simultaneous SAR values are 0.37 W/kg and 1.06 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC establishes portable category SAR conditions for the Dell model P133F convertible PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 0.68 W/kg and 1.18 W/kg respectively.
variousPower Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC establishes portable category SAR conditions for the Dell model P133F convertible PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 0.56 W/kg and 1.16 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC establishes portable category SAR conditions for the Dell model P133F convertible PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.16 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.01W/kg and 1.59W/kg respectively. This change establishes portable category SAR conditions for the Dell model P182G with Wistron antenna Part number 0772W9 and 08V97D with TAS implemented in DTS and UNII-1 to UNII-4 Bands. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.14W/kg and 1.59W/kg respectively. This change establishes portable category SAR conditions for the Dell model P182G with Wistron antenna Part number 0772W9 and 08V97D with TAS implemented in DTS and UNII-1 to UNII-4 Bands. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.44W/kg and 1.59W/kg respectively. This change establishes portable category SAR conditions for the Dell model P182G with Wistron antenna Part number 0772W9 and 08V97D with TAS implemented in DTS and UNII-1 to UNII-4 Bands. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.78 W/kg and 1.59 W/kg respectively. This change establishes portable category SAR conditions for the Dell model P182G with Wistron antenna Part number 0772W9 and 08V97D with TAS implemented in DTS and UNII-1 to UNII-4 Bands. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Lenovo model IdeaPad 5 2-in-1 14IRU9 convertible PC. The highest reported Body and Simultaneous SAR values are 1.20 W/kg and 1.27 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Lenovo model IdeaPad 5 2-in-1 16IRU9 convertible PC. The highest reported Body and Simultaneous SAR values are 0.11 W/kg and 1.10 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Lenovo model IdeaPad 5 2-in-1 14IRU9 convertible PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.27 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Lenovo model IdeaPad 5 2-in-1 16IRU9 convertible PC. The highest reported Body and Simultaneous SAR values are 0.99 W/kg and 1.10 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Lenovo model IdeaPad 5 2-in-1 14IRU9 convertible PC. The highest reported Body and Simultaneous SAR values are 1.08 W/kg and 1.15 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. This change establishes portable category SAR conditions for the Lenovo model IdeaPad 5 2-in-1 16IRU9 convertible PC. The highest reported Body and Simultaneous SAR values are 0.90 W/kg and 1.57 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. This change establishes portable category SAR conditions for the Lenovo model IdeaPad 5 2-in-1 14IRU9 convertible PC. The highest reported Body and Simultaneous SAR values are 0.96 W/kg and 1.50 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Lenovo model IdeaPad 5 2-in-1 16IRU9 convertible PC. The highest reported Body and Simultaneous SAR values are 1.01 W/kg and 1.03 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08/kg and 1.15W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I46C convertible PC with PIFA antennas part number 6036B0350401 (81EAB815.G21) and 6036B0350501(81EAB815.G22). Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.52W/kg and 1.15W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I46C convertible PC with PIFA antennas part number 6036B0350401 (81EAB815.G21) and 6036B0350501(81EAB815.G22). Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.07 W/kg and 1.15 W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I46C convertible PC with PIFA antennas part number 6036B0350401 (81EAB815.G21) and 6036B0350501(81EAB815.G22). Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.26W/kg and 1.15W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I46C convertible PC with PIFA antennas part number 6036B0350401 (81EAB815.G21) and 6036B0350501(81EAB815.G22). Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC establishes portable category SAR conditions for the HP model TPN-W157 convertible PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 1.00 W/kg and 1.08 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC establishes portable category SAR conditions for the HP model TPN-W157 convertible PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 0.70 W/kg and 1.37 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. This C2PC establishes portable category SAR conditions for the HP model TPN-W157 convertible PC. The highest reported Body and Simultaneous SAR values are 0.65 W/kg and 1.20 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC establishes portable category SAR conditions for the HP model TPN-W157 convertible PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.20 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC establishes portable category SAR conditions for the HP model TPN-W156 convertible PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.49 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC establishes portable category SAR conditions for the HP model TPN-W156 convertible PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 0.54 W/kg and 1.07 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. This C2PC establishes portable category SAR conditions for the HP model TPN-W156 convertible PC. The highest reported Body and Simultaneous SAR values are 0.75 W/kg and 1.46 W/kg respectively.
variousPower Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC establishes portable category SAR conditions for the HP model TPN-W156 convertible PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 0.72 W/kg and 1.49 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC establishes portable category SAR conditions for the Dell model P132F notebook PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.38 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC establishes portable category SAR conditions for the Dell model P132F notebook PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 0.86 W/kg and 1.45 W/kg respectively.
variousPower Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC establishes portable category SAR conditions for the Dell model P132F notebook PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 0.60 W/kg and 1.16 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. This C2PC establishes portable category SAR conditions for the Dell model P132F notebook PC. The highest reported Body and Simultaneous SAR values are 0.71 W/kg and 1.38 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Lenovo model ThinkBook 14 G6+ IMH notebook PC. The highest reported Body and Simultaneous SAR values are 0.10 W/kg and 1.29 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Lenovo model ThinkBook 14 G6+ IMH notebook PC. The highest reported Body and Simultaneous SAR values are 0.70 W/kg and 1.31 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Lenovo model ThinkBook 14 G6+ IMH notebook PC. The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.60 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. This change establishes portable category SAR conditions for the Lenovo model ThinkBook 14 G6+ IMH notebook PC. The highest reported Body and Simultaneous SAR values are 0.62 W/kg and 1.22 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC establishes portable category SAR conditions for the Dell model P187G notebook PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 0.85 W/kg and 1.21 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC establishes portable category SAR conditions for the Dell model P187G notebook PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.17 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. This C2PC establishes portable category SAR conditions for the Dell model P187G notebook PC. The highest reported Body and Simultaneous SAR values are 1.08 W/kg and 1.13 W/kg respectively.
variousPower Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC establishes portable category SAR conditions for the Dell model P187G notebook PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 1.12 W/kg and 1.50 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the HP model TPN-Q296 convertible PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.15 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. This change establishes portable category SAR conditions for the HP model TPN-Q296 convertible PC. The highest reported Body and Simultaneous SAR values are 0.48 W/kg and 0.84 W/kg respectively.
variousPower Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the HP model TPN-Q296 convertible PC. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 1.12 W/kg and 1.15 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the HP model TPN-Q296 convertible PC. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.45 W/kg and 0.87 W/kg respectively.
variousPower Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the HP model TPN-Q295 notebook PC. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.31 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the HP model TPN-Q295 notebook PC. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 1.11 W/kg and 1.23 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the HP model TPN-Q295 notebook PC. The highest reported Body and Simultaneous SAR values are 0.12 W/kg and 1.31 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. This change establishes portable category SAR conditions for the HP model TPN-Q295 notebook PC. The highest reported Body and Simultaneous SAR values are 0.47 W/kg and 0.97 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P181G PC. The highest reported Body and Simultaneous SAR values are 0.31 W/kg and 0.47 W/kg respectively. Class II Permissive Change: WLAN TAS feature activation operating in WLAN 2.4 GHz and WLAN 5 GHz bands for the Dell model P181G PC.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P181G PC. The highest reported Body and Simultaneous SAR values are 0.93 W/kg and 1.29 W/kg respectively. Class II Permissive Change: WLAN TAS feature activation operating in WLAN 2.4 GHz and WLAN 5 GHz bands for the Dell model P181G PC.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P181G PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.29 W/kg respectively. Class II Permissive Change: WLAN TAS feature activation operating in WLAN 2.4 GHz and WLAN 5 GHz bands for the Dell model P181G PC.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. This change establishes portable category SAR conditions for the Dell model P181G PC. The highest reported Body and Simultaneous SAR values are 0.31 W/kg and 0.41 W/kg respectively. Class II Permissive Change: WLAN TAS feature activation operating in WLAN 2.4 GHz and WLAN 5 GHz bands for the Dell model P181G PC.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz and 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations. For the UNII-1 to UNII-3 band this device has been previously approved for Antenna type: monopole Antenna P/N 260-25083 was tested at 29mm. The highest reported Body and Simultaneous SAR values are 0.58W/kg and 1.14W/kg respectively. SAR testing has been performed to demonstrate RF compliance for the UNII-1 to UNII-3 bands. This change is to add a new antenna for a monopole type (Hong-Bo part no. 260-25084 and 260-25083) for the UNII-4 Band. All other hardware remains identical and all antenna gains are equal or less than those approved originally. Use of this antenna meets MPE requirements of KDB447498 and can be used in mobile configurations. Use in portable configurations requires appropriate evaluation and Permissive Change as required by RF exposure procedures.
variousPower Output listed is conducted. Modular Approval filing. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the HP model TPN-Q293 convertible PC. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.75 W/kg and 1.32 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the HP model TPN-Q293 convertible PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.36 W/kg respectively.
variousPower Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the HP model TPN-Q293 convertible PC. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.75 W/kg and 1.36 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. This change establishes portable category SAR conditions for the HP model TPN-Q293 convertible PC. The highest reported Body and Simultaneous SAR values are 0.69 W/kg and 1.11 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the HP model TPN-Q292 convertible PC. The highest reported Body and Simultaneous SAR values are 0.11 W/kg and 1.49 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the HP model TPN-Q292 convertible PC. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 1.01 W/kg and 1.12 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the HP model TPN-Q292 convertible PC. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 1.07 W/kg and 1.49 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. This change establishes portable category SAR conditions for the HP model TPN-Q292 convertible PC. The highest reported Body and Simultaneous SAR values are 0.80 W/kg and 1.51 W/kg respectively.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz and 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations. Addition of a new antenna and antenna type for the UNII-4 Band. (Antenna type: Dipole Antenna Wieson Part no ARY121-0009-002-H0).
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P128F PC. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.78 W/kg and 1.47 W/kg respectively.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P172G Convertible PC. The highest reported Body and Simultaneous SAR values are 0.79 W/kg and 1.58 W/kg respectively.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.63W/kg and 1.11W/kg respectively. This change establishes portable category SAR conditions for the Dell model P125F Notebook PC with SPEED F-0GFS- 6144-001-00 and F-0G-FS-6144-002-00 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.86W/kg and 1.33W/kg respectively. This change establishes portable category SAR conditions for the Dell model P162G Notebook PC with WNC DC33002QV0L and DC33002QV1L antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P171G Notebook PC. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.45 W/kg and 1.06 W/kg respectively.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P117F PC. The highest reported Body and Simultaneous SAR values are 0.69 W/kg and 1.34 W/kg respectively.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P120F PC. The highest reported Body and Simultaneous SAR values are 0.35 W/kg and 0.77 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.57 W/kg and 1.40 W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C165 Convertible PC with PIFA antennas, Vendor 1: 48EABP0R, 48EABP0S, Vendor 2: 219HCTN12274, 219HCTN12275. TAS feature enabled. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 1.40W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C165 Convertible PC with PIFA antennas, Vendor 1: 48EABP0R, 48EABP0S, Vendor 2: 219HCTN12274, 219HCTN12275. TAS feature enabled. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.40W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C165 Convertible PC with PIFA antennas, Vendor 1: 48EABP0R, 48EABP0S, Vendor 2: 219HCTN12274, 219HCTN12275. TAS feature enabled. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.40W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C165 Convertible PC with PIFA antennas, Vendor 1: 48EABP0R, 48EABP0S, Vendor 2: 219HCTN12274, 219HCTN12275. TAS feature enabled. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.68W/kg and 1.41W/kg respectively. This modules satisfies conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value less than 0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. This change establishes portable category SAR conditions for the Asus model UX3404V Notebook PC with Innowave F00193213110001 and INPAQ WA-P-LELE-04-039 antennas. TAS feature is enabled. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.16W/kg and 1.41W/kg respectively. This modules satisfies conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value less than 0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. This change establishes portable category SAR conditions for the Asus model UX3404V Notebook PC with Innowave F00193213110001 and INPAQ WA-P-LELE-04-039 antennas. TAS feature is enabled. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.34 W/kg and 0.68 W/kg respectively. This modules satisfies conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value less than 0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. This change establishes portable category SAR conditions for the Asus model UX3404V Notebook PC with Innowave F00193213110001 and INPAQ WA-P-LELE-04-039 antennas. TAS feature is enabled. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.68W/kg and 1.41W/kg respectively. This modules satisfies conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value less than 0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. This change establishes portable category SAR conditions for the Asus model UX3404V Notebook PC with Innowave F00193213110001 and INPAQ WA-P-LELE-04-039 antennas. TAS feature is enabled. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.86W/kg and 1.33W/kg respectively. This change establishes portable category SAR conditions for the Dell model P162G Notebook PC with WNC DC33002QV0L and DC33002QV1L antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.33W/kg respectively. This change establishes portable category SAR conditions for the Dell model P162G Notebook PC with WNC DC33002QV0L and DC33002QV1L antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.27W/kg and 1.33W/kg respectively. This change establishes portable category SAR conditions for the Dell model P162G Notebook PC with WNC DC33002QV0L and DC33002QV1L antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08 W/kg and 1.33 W/kg respectively. This change establishes portable category SAR conditions for the Dell model P162G Notebook PC with WNC DC33002QV0L and DC33002QV1L antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.20 W/kg and 1.21 W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C164 Notebook PC with with PIFA antennas Vendor 1 DC33002SH00 and DC33002SH10 and Vendor 2 81EABP15.G41 and 81EABP15.G42. The WLAN TAS feature is enabled. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.35W/kg and 1.21W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C164 Notebook PC with with PIFA antennas Vendor 1 DC33002SH00 and DC33002SH10 and Vendor 2 81EABP15.G41 and 81EABP15.G42. The WLAN TAS feature is enabled. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.18W/kg and 1.21W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C164 Notebook PC with with PIFA antennas Vendor 1 DC33002SH00 and DC33002SH10 and Vendor 2 81EABP15.G41 and 81EABP15.G42. The WLAN TAS feature is enabled. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.21W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C164 Notebook PC with with PIFA antennas Vendor 1 DC33002SH00 and DC33002SH10 and Vendor 2 81EABP15.G41 and 81EABP15.G42. The WLAN TAS feature is enabled. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.96 W/kg and 1.11 W/kg respectively. This change establishes portable category SAR conditions for the Dell model P125F Notebook PC with SPEED F-0G-FS-6144-001-00 and F-0G-FS-6144-002-00 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.63W/kg and 1.11W/kg respectively. This change establishes portable category SAR conditions for the Dell model P125F Notebook PC with SPEED F-0G-FS-6144-001-00 and F-0G-FS-6144-002-00 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.31W/kg and 1.11W/kg respectively. This change establishes portable category SAR conditions for the Dell model P125F Notebook PC with SPEED F-0G-FS-6144-001-00 and F-0G-FS-6144-002-00 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.11W/kg respectively. This change establishes portable category SAR conditions for the Dell model P125F Notebook PC with SPEED F-0G-FS-6144-001-00 and F-0G-FS-6144-002-00 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P171G Notebook PC. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.45 W/kg and 1.06 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. This change establishes portable category SAR conditions for the Dell model P171G Notebook PC. The highest reported Body and Simultaneous SAR values are 0.47 W/kg and 0.96 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P171G Notebook PC. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.94 W/kg and 1.58 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P171G Notebook PC. The highest reported Body and Simultaneous SAR values are 0.17 W/kg and 1.11 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.62W/kg and 1.34W/kg respectively. This change establishes portable category SAR conditions for the Dell model P168G Convertible PC with WNC antenna Part number 81EABW15.G19 and 81EABW15.G20. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.52 W/kg and 1.34 W/kg respectively. This change establishes portable category SAR conditions for the Dell model P168G Convertible PC with WNC antenna Part number 81EABW15.G19 and 81EABW15.G20. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and 1.34W/kg respectively. This change establishes portable category SAR conditions for the Dell model P168G Convertible PC with WNC antenna Part number 81EABW15.G19 and 81EABW15.G20. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.34W/kg respectively. This change establishes portable category SAR conditions for the Dell model P168G Convertible PC with WNC antenna Part number 81EABW15.G19 and 81EABW15.G20. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 0.89W/kg respectively. This change establishes portable category SAR conditions for the Dell model P115F Notebook PC with WNC DC33002SL0L and DC33002SL1L antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.48W/kg and 0.89W/kg respectively. This change establishes portable category SAR conditions for the Dell model P115F Notebook PC with WNC DC33002SL0L and DC33002SL1L antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.42W/kg and 0.89W/kg respectively. This change establishes portable category SAR conditions for the Dell model P115F Notebook PC with WNC DC33002SL0L and DC33002SL1L antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.20 W/kg and 0.89 W/kg respectively. This change establishes portable category SAR conditions for the Dell model P115F Notebook PC with WNC DC33002SL0L and DC33002SL1L antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.29W/kg and 0.75W/kg respectively. This change establishes portable category SAR conditions for the Dell model P114F Notebook PC with WNC DC33002SK0L and DC33002SK1L antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 0.75W/kg respectively. This change establishes portable category SAR conditions for the Dell model P114F Notebook PC with WNC DC33002SK0L and DC33002SK1L antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.46W/kg and 0.75W/kg respectively. This change establishes portable category SAR conditions for the Dell model P114F Notebook PC with WNC DC33002SK0L and DC33002SK1L antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03 W/kg and 0.75 W/kg respectively. This change establishes portable category SAR conditions for the Dell model P114F Notebook PC with WNC DC33002SK0L and DC33002SK1L antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.61 W/kg and 1.41 W/kg respectively. This change establishes portable category SAR conditions for the Lenovo Legion Slim 5 16IRH8 Notebook PC with High-Tek DC33002T900 and DC33002T910 and Pulse DC33002TF00 and DC33002TF10 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.41W/kg respectively. This change establishes portable category SAR conditions for the Lenovo Legion Slim 5 16IRH8 Notebook PC with High-Tek DC33002T900 and DC33002T910 and Pulse DC33002TF00 and DC33002TF10 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.41W/kg respectively. This change establishes portable category SAR conditions for the Lenovo Legion Slim 5 16IRH8 Notebook PC with High-Tek DC33002T900 and DC33002T910 and Pulse DC33002TF00 and DC33002TF10 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.20W/kg and 1.41W/kg respectively. This change establishes portable category SAR conditions for the Lenovo Legion Slim 5 16IRH8 Notebook PC with High-Tek DC33002T900 and DC33002T910 and Pulse DC33002TF00 and DC33002TF10 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P165G PC. The highest reported Body and Simultaneous SAR values are 0.25 W/kg and 0.25 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P165G PC. The highest reported Body and Simultaneous SAR values are 0.25 W/kg and 0.25 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. This change establishes portable category SAR conditions for the Dell model P165G PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and < 0.10 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P165G PC. This device meets the SAR test exemption threshold listed in KDB 447498 and is authorized for portable operation.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. This change establishes portable category SAR conditions for the Dell model P181G PC. The highest reported Body and Simultaneous SAR values are 0.31 W/kg and 0.41 W/kg respectively.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. This change establishes portable category SAR conditions for the Dell model P181G PC. The highest reported Body and Simultaneous SAR values are 0.93 W/kg and 1.29 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P181G PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.29 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P181G PC. The highest reported Body and Simultaneous SAR values are 0.31 W/kg and 0.47 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.78 W/kg and 1.59 W/kg respectively. This change establishes portable category SAR conditions for the Dell model P182G with Wistron antenna Part number 0772W9 and 08V97D. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.44W/kg and 1.59W/kg respectively. This change establishes portable category SAR conditions for the Dell model P182G with Wistron antenna Part number 0772W9 and 08V97D. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.14W/kg and 1.59W/kg respectively. This change establishes portable category SAR conditions for the Dell model P182G with Wistron antenna Part number 0772W9 and 08V97D. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.01W/kg and 1.59W/kg respectively. This change establishes portable category SAR conditions for the Dell model P182G with Wistron antenna Part number 0772W9 and 08V97D. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P172G Convertible PC. The highest reported Body and Simultaneous SAR values are 0.40 W/kg and 1.58 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P172G Convertible PC. The highest reported Body and Simultaneous SAR values are 0.40 W/kg and 1.58 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P172G Convertible PC. The highest reported Body and Simultaneous SAR values are 0.79 W/kg and 1.58 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. This change establishes portable category SAR conditions for the Dell model P172G Convertible PC. The highest reported Body and Simultaneous SAR values are 0.56 W/kg and 1.08 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. This change establishes portable category SAR conditions for the Lenovo model Yoga 7 16IRL8 PC. The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.29 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Lenovo model Yoga 7 16IRL8 PC. The highest reported Body and Simultaneous SAR values are 0.13 W/kg and 1.58 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Lenovo model Yoga 7 16IRL8 PC. The highest reported Body and Simultaneous SAR values are 1.45 W/kg and 1.58 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Lenovo model Yoga 7 16IRL8 PC. The highest reported Body and Simultaneous SAR values are 0.93 W/kg and 1.11 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Lenovo model Yoga 7 14IRL8 PC. The highest reported Body and Simultaneous SAR values are 0.72 W/kg and 1.13 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. This change establishes portable category SAR conditions for the Lenovo model Yoga 7 14IRL8 PC. The highest reported Body and Simultaneous SAR values are 1.54 W/kg and 1.59 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Lenovo model Yoga 7 14IRL8 PC. The highest reported Body and Simultaneous SAR values are 1.18 W/kg and 1.27 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Lenovo model Yoga 7 14IRL8 PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.27 W/kg respectively.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.11W/kg and 1.52W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C160 PC with WLAN TAS implementation with Vendor 1 Part number 81EABP15.G21 and 81EABP15.G22 and Vendor 2 Part Number 0ACCN021019N and 0ACCN021020N antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.37W/kg and 1.52W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C160 PC with WLAN TAS implementation with Vendor 1 Part Number 81EABP15.G21 and 81EABP15.G22 and Vendor 2 Part Number 0ACCN021019N and 0ACCN021020N antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 1.52 W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C160 PC with WLAN TAS implementation with Vendor 1 Part Number 81EABP15.G21 and 81EABP15.G22 and Vendor 2 Part number 0ACCN021019N and 0ACCN021020N antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.52W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C160 PC with WLAN TAS implementation with Vendor 1 Part Number 81EABP15.G21 and 81EABP15.G22 and Vendor 2 Part Number 0ACCN021019N and 0ACCN021020N antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.56 W/kg and 1.50 W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-W158 with PIFA antennas Vendor 1 Part number, 025.9027J.0001 and 025.9027K.0001 and Vendor 2 Part number, 025.9027I.0001 and 025.9027H.0001. TAS feature is enabled. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.42W/kg and 1.50W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-W158 with PIFA antennas Vendor 1 Part number, 025.9027J.0001 and 025.9027K.0001 and Vendor 2 Part number, 025.9027I.0001 and 025.9027H.0001. TAS feature is enabled. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.50W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-W158 with PIFA antennas Vendor 1 Part number, 025.9027J.0001 and 025.9027K.0001 and Vendor 2 Part number, 025.9027I.0001 and 025.9027H.0001. TAS feature is enabled. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.50W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-W158 with PIFA antennas Vendor 1 Part number, 025.9027J.0001 and 025.9027K.0001 and Vendor 2 Part number, 025.9027I.0001 and 025.9027H.0001. TAS feature is enabled. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Lenovo model Lenovo 500e Yoga Chromebook Gen 4 convertible PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.32 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Lenovo model Lenovo 500e Yoga Chromebook Gen 4 convertible PC. The highest reported Body and Simultaneous SAR values are 0.64 W/kg and 1.22 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Lenovo model Lenovo 500e Yoga Chromebook Gen 4 convertible PC. The highest reported Body and Simultaneous SAR values are 0.94 W/kg and 1.32 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. This change establishes portable category SAR conditions for the Lenovo model Lenovo 500e Yoga Chromebook Gen 4 convertible PC. The highest reported Body and Simultaneous SAR values are 1.06 W/kg and 1.12 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. This change establishes portable category SAR conditions for the Lenovo model IdeaPad Slim 5 14IRL8 PC The highest reported Body and Simultaneous SAR values are 0.64 W/kg and 1.22 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Lenovo model IdeaPad Slim 5 14IRL8 PC The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.49 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Lenovo model IdeaPad Slim 5 14IRL8 PC The highest reported Body and Simultaneous SAR values are 0.96 W/kg and 1.51 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Lenovo model IdeaPad Slim 5 14IRL8 PC The highest reported Body and Simultaneous SAR values are 0.97 W/kg and 1.49 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. This change establishes portable category SAR conditions for the Lenovo model IdeaPad Slim 5 16IRL8 PC The highest reported Body and Simultaneous SAR values are 0.49 W/kg and 1.00 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Lenovo model IdeaPad Slim 5 16IRL8 PC The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.45 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Lenovo model IdeaPad Slim 5 16IRL8 PC The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.19 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Lenovo model IdeaPad Slim 5 16IRL8 PC The highest reported Body and Simultaneous SAR values are 1.00 W/kg and 1.45 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.14 W/kg and 1.44W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I45C PC with TAS feature enabled and extension of the UNII-4 band. Hong-Bo 6036B0314201 and 6036B0316301, 6036B0314301 and 6036B0314401 and WNC 6036B0316401 and 6036B0313501, 6036B0313601 and 6036B0313701 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.21W/kg and 1.44W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I45C PC with TAS feature enabled and extension of the UNII-4 band. Hong-Bo 6036B0314201 and 6036B0316301, 6036B0314301 and 6036B0314401 and WNC 6036B0316401 and 6036B0313501, 6036B0313601 and 6036B0313701 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.44W/kg respectively. This change establishes portable category SAR conditions for the HP model HSNI45C PC with TAS feature enabled and extension of the UNII-4 band. Hong-Bo 6036B0314201 and 6036B0316301, 6036B0314301 and 6036B0314401 and WNC 6036B0316401 and 6036B0313501, 6036B0313601 and 6036B0313701 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and simultaneous SAR values are 1.54W/kg and 1.44W/kg respectively. This change establishes portable category SAR conditions for the HP model HSNI45C PC with TAS feature enabled and extension of the UNII-4 band. Hong-Bo 6036B0314201 and 6036B0316301, 6036B0314301 and 6036B0314401 and WNC 6036B0316401 and 6036B0313501, 6036B0313601 and 6036B0313701 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I46C PC with Vendor 1 6036B0312901 and 6036B0313001 and Vendor 2 6036B0312401 and 6036B0312501 antennas. The WLAN TAS feature is enabled for this application. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. This change establishes portable category SAR conditions for the Dell model P120F PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 0.21 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P120F PC. The highest reported Body and Simultaneous SAR values are 0.76 W/kg and 1.28 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P120F PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 0.51 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P120F PC. The highest reported Body and Simultaneous SAR values are 0.25 W/kg and 0.51 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. This change establishes portable category SAR conditions for the Lenovo model Lenovo 14e Chromebook Gen 3 PC. The highest reported Body and Simultaneous SAR values are 0.23 W/kg and 0.58 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Lenovo model Lenovo 14e Chromebook Gen 3 PC. The highest reported Body and Simultaneous SAR values are 0.64 W/kg and 1.21 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Lenovo model Lenovo 14e Chromebook Gen 3 PC. The highest reported Body and Simultaneous SAR values are 0.76 W/kg and 1.45 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Lenovo model Lenovo 14e Chromebook Gen 3 PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.45 W/kg respectively.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.43W/kg and 1.45W/kg respectively. This change for HP model TPN-C159 PC establishes the extension to UNII-4 Band. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.09W/kg and 0.95W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model IP Flex 3 Chrome 12IAN8 convertible PC with ZTX DC33001ZZ00 and DC33001ZZ10 and Luxshare-ICT DC33001ZW10 and DC33001ZW00 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.42W/kg and 0.95W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model IP Flex 3 Chrome 12IAN8 convertible PC with ZTX DC33001ZZ00 and DC33001ZZ10 and Luxshare-ICT DC33001ZW10 and DC33001ZW00 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 0.95W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model IP Flex 3 Chrome 12IAN8 convertible PC with ZTX DC33001ZZ00 and DC33001ZZ10 and Luxshare-ICT DC33001ZW10 and DC33001ZW00 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.40 W/kg and 0.95 W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model IP Flex 3 Chrome 12IAN8 convertible PC with ZTX DC33001ZZ00 and DC33001ZZ10 and Luxshare-ict DC33001ZW10 and DC33001ZW00 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.90W/kg and 1.47W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C155 PC with TAS feature enabled. SAR testing was performed to demonstrate RF compliance.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.52W/kg and 1.60W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C157 PC has been granted on 3/27/2022 for SAR condition, and has been granted on 4/28/2022 for TAS feature enabled. This C2PC establishes the extension to UNII-4 Band. SAR testing was performed to demonstrate RF compliance.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.87W/kg and 1.60W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C154 with PIFA antennas of equal or lesser gain. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.49 W/kg and 1.60 W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C154 with PIFA antennas of equal or lesser gain. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.60W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C154 with PIFA antennas of equal or lesser gain. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.52W/kg and 1.60W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C154 with PIFA antennas of equal or lesser gain. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P171G PC with Speed F-0G-FS-6142-001-00 and F-0G-FS-6142-002-00 antennas. The highest reported Body and Simultaneous SAR values are 0.27 W/kg and 1.39 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. This change establishes portable category SAR conditions for the Dell model P171G PC with Speed F-0G-FS-6142-001-00 and F-0G-FS-6142-002-00 antennas. The highest reported Body and Simultaneous SAR values are 0.95 W/kg and 1.11 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P171G PC with Speed F-0G-FS-6142-001-00 and F-0G-FS-6142-002-00 antennas. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 1.12 W/kg and 1.39 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P171G PC with Speed F-0G-FS-6142-001-00 and F-0G-FS-6142-002-00 antennas. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.60 W/kg and 1.16 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P171G PC with Speed F-0G-FS-6143-001-00 and F-0G-FS-6143-002-00 antennas. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.47 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P171G PC with Speed F-0G-FS-6143-001-00 and F-0G-FS-6143-002-00 antennas. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.90 W/kg and 1.47 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. This change establishes portable category SAR conditions for the Dell model P171G PC with Speed F-0G-FS-6143-001-00 and F-0G-FS-6143-002-00 antennas. The highest reported Body and Simultaneous SAR values are 0.76 W/kg and 1.18 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P171G PC with Speed F-0G-FS-6143-001-00 and F-0G-FS-6143-002-00 antennas. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.72 W/kg and 1.28 W/kg respectively.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. The equipment in this application is HP model TPN-W155 PC has been granted on 5/17/2022 for SAR condition, and has been granted on 5/20/2022 for TAS feature enabled, and has been granted on 8/23/2022 for EnDM (enhanced device mode) enabled. The module has been granted on 8/29/2022 for the UNII-4 band, and this C2PC establishes the extension of UNII-4 band on this equipment. The highest reported Body and Simultaneous SAR values are 1.26 W/kg and 1.59 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P125F PC with HONG-BO 025.9025N.0001 and 025.9025O.0001 antennas. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.56 W/kg and 1.17 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. This change establishes portable category SAR conditions for the Dell model P125F PC with HONG-BO 025.9025N.0001 and 025.9025O.0001 antennas. The highest reported Body and Simultaneous SAR values are 0.95 W/kg and 1.21 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P125F PC with HONG-BO 025.9025N.0001 and 025.9025O.0001 antennas. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.80 W/kg and 1.07 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P125F PC with HONG-BO 025.9025N.0001 and 025.9025O.0001 antennas. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 1.17 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P128F PC with WNC 025.9025Q.0001 and 025.9025Q.0001 antennas. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.78 W/kg and 1.47 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. This change establishes portable category SAR conditions for the Dell model P128F PC with WNC 025.9025Q.0001 and 025.9025Q.0001 antennas. The highest reported Body and Simultaneous SAR values are 0.52 W/kg and 1.15 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P128F PC with WNC 025.9025Q.0001 and 025.9025Q.0001 antennas. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.95 W/kg and 1.35 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P128F PC with WNC 025.9025Q.0001 and 025.9025Q.0001 antennas. The highest reported Body and Simultaneous SAR values are 0.18 W/kg and 1.47 W/kg respectively.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.18W/kg and 1.27W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I57C Convertible PC. Antenna(s) is/are of the same type and lower gain from original approval, G-Sensor is enabled. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are0.03W/kg and 1.27W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I57C Convertible PC. Antenna(s) is/are of the same type and lower gain from original approval, G-Sensor is enabled. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.77 W/kg and 1.27 W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I57C Convertible PC. Antenna(s) is/are of the same type and lower gain from original approval, G-Sensor is enabled. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.68W/kg and 1.27W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I57C Convertible PC. Antenna(s) is/are of the same type and lower gain from original approval, G-Sensor is enabled. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This C2PC establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value less than 0.8W/kg for mixed mobile/portable conditions. The highest reported Body and Simultaneous SAR values are 0.67 W/kg and 1.42 W/kg respectively. SAR testing was performed to demonstrate RF compliance.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This C2PC establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg for mixed mobile/portable conditions. The highest reported Body and Simultaneous SAR values are 0.68 W/kg and 1.41 W/kg respectively. SAR testing was performed to demonstrate RF compliance.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.43W/kg and 1.59W/kg respectively. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. The equipment in this application is HP model TPN-W155 PC has been granted on 5/17/2022 for SAR condition, and has been granted on 5/20/2022 for TAS feature enabled. This C2PC establishes the EnDM (enhanced device mode).
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.62 W/kg and 1.26 W/kg respectively. Device is a 2 x 2 MIMO configuration. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. The equipment in this application is HP model TPN-W155 PC has been granted on 5/17/2022 for SAR condition, and has been granted on 5/20/2022 for TAS feature enabled. This C2PC establishes the EnDM (enhanced device mode) enabled.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.26W/kg and 1.29W/kg respectively. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. The equipment in this application is HP model TPN-W155 PC has been granted on 5/17/2022 for SAR condition, and has been granted on 5/20/2022 for TAS feature enabled. This C2PC establishes the EnDM (enhanced device mode) enabled.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.16W/kg and 1.59W/kg respectively. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. The equipment in this application is HP model TPN-W155 PC has been granted on 5/17/2022 for SAR condition, and has been granted on 5/20/2022 for TAS feature enabled. This C2PC establishes the EnDM (enhanced device mode) enabled.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.61W/kg and 1.20W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C161 PC with WNC 48EABP07.SGBMLL and 48EABP08.SGBMLL and HTK 219HCTN12195 and 219HCTN12196 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.13W/kg and 1.47W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C161 PC with WNC 48EABP07.SGBMLL and 48EABP08.SGBMLL and HTK 219HCTN12195 and 219HCTN12196 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.74W/kg and 1.47W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C161 PC with WNC 48EABP07.SGBMLL and 48EABP08.SGBMLL and HTK 219HCTN12195 and 219HCTN12196 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.66 W/kg and 1.20 W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C161 PC with WNC 48EABP07.SGBMLL and 48EABP08.SGBMLL and HTK 219HCTN12195 and 219HCTN12196 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. The highest reported Body and Simultaneous SAR values are 0.63 W/kg and 1.29 W/kg respectively. This change is to request approval for portable category specific host notebook PC, Intel RC57 with Auden ANTRP5C119-1801 (Tx1) and ANTRP5C119-1802 (Tx2) antennas. And decrease in the WLAN Output Power through BIOS respectively. Antenna is of the same type and higher gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.38W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model IP 5 Chrome 16IAU7 PC with SPEED DC33001YD00 and Luxshare-Ict DC33001YC00 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.53W/kg and 1.38W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model IP 5 Chrome 16IAU7 PC with SPEED DC33001YD00 and Luxshare-Ict DC33001YC00 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.53 W/kg and 1.38 W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model IP 5 Chrome 16IAU7 PC with SPEED DC33001YD00 and Luxshare-Ict DC33001YC00 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.38W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model IP 5 Chrome 16IAU7 PC with SPEED DC33001YD00 and Luxshare-Ict DC33001YC00 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.43 W/kg and 0.71 W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model Lenovo Flex 7 14IAU7 PC with AWAN 025.9020M.0001 and 025.9020N.0001 and WNC 025.9020M.0021 and 025.9020N.0021 and HTK 025.9020M.0011 and 025.9020N.0011 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.36 W/kg and 0.61 W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model Lenovo Flex 7 14IAU7 PC with AWAN 025.9020M.0001 and 025.9020N.0001 and WNC 025.9020M.0021 and 025.9020N.0021 and HTK 025.9020M.0011 and 025.9020N.0011 antennas. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.61 W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model Lenovo Flex 7 14IAU7 PC with AWAN 025.9020M.0001 and 025.9020N.0001 and WNC 025.9020M.0021 and 025.9020N.0021 and HTK 025.9020M.0011 and 025.9020N.0011 antennas. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance and Power Density. Addition of a new antenna, antenna type is different with the original application. Hong Bo - HLN P/N 260-25083 (Antenna type: Monopole Antenna). This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.51 W/kg and 0.80 W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model Lenovo Flex 7 14IAU7 PC with AWAN 025.9020M.0001 and 025.9020N.0001 and WNC 025.9020M.0021 and 025.9020N.0021 and HTK 025.9020M.0011 and 025.9020N.0011 antennas. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.43W/kg and 1.59W/kg respectively. The equipment in this application is HP model TPN-W155 PC has been granted the 5/17/2022 with High-Tek 8025.901ZV.0001 and 025.901ZU.0001 and INPAQ 025.90204.0001 and 025.90205.0001 antennas. TAS feature is enabled. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.16W/kg and 1.59W/kg respectively. The equipment in this application is HP model TPN-W155 PC has been granted the 5/17/2022 with High-Tek 8025.901ZV.0001 and 025.901ZU.0001 and INPAQ 025.90204.0001 and 025.90205.0001 antennas. TAS feature is enabled. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.99W/kg and 1.59W/kg respectively. The equipment in this application is HP model TPN-W155 PC has been granted the 5/17/2022 with High-Tek 8025.901ZV.0001 and 025.901ZU.0001 and INPAQ 025.90204.0001 and 025.90205.0001 antennas. TAS feature is enabled. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.62 W/kg and 1.59 W/kg respectively. The equipment in this application is HP model TPN-W155 PC has been granted the 5/17/2022 with High-Tek 8025.901ZV.0001 and 025.901ZU.0001 and INPAQ 025.90204.0001 and 025.90205.0001 antennas. TAS feature is enabled. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.16W/kg and 1.59W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-W155 PC with High-Tek 025.901ZV.0001 and 025.901ZU.0001 and INPAQ 025.90204.0001 and 025.90205.0001 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.62 W/kg and 1.26 W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-W155 PC with High-Tek 025.901ZV.0001 and 025.901ZU.0001 and INPAQ 025.90204.0001 and 025.90205.0001 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.43W/kg and 1.59W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-W155 PC with High-Tek 025.901ZV.0001 and 025.901ZU.0001 and INPAQ 025.90204.0001 and 025.90205.0001 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.26W/kg and 1.29W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-W155 PC with High-Tek 025.901ZV.0001 and 025.901ZU.0001 and INPAQ 025.90204.0001 and 025.90205.0001 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.15W/kg and 1.35W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model ThinkBook 14 G4 IAP PC with SOUTHSTAR DC33002O000 and High-Tek DC33002O100 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.10W/kg and 1.17W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model ThinkBook 14 G4 IAP PC with SOUTHSTAR DC33002O000 and High-Tek DC33002O100 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.20W/kg and 1.35W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model ThinkBook 14 G4 IAP PC with SOUTHSTAR DC33002O000 and High-Tek DC33002O100 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.51 W/kg and 1.11 W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model ThinkBook 14 G4 IAP PC with SOUTHSTAR DC33002O000 and High-Tek DC33002O100 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.76W/kg and 1.34W/kg respectively. This change establishes portable category SAR conditions for the Dell model P117F PC with SPEED F-0G-FS-6123-001 and F-0G-FS-6123-002 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.53W/kg and 1.60W/kg respectively. This change establishes portable category SAR conditions for the Dell model P157G PC with WNC WTN291000L and WTN291000R antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.69W/kg and 1.34W/kg respectively. This change establishes portable category SAR conditions for the Dell model P117F PC with SPEED F-0G-FS-6123-001 and F-0G-FS-6123-002 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.16 W/kg and 1.31 W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-W147 PC with INPAQ 025.901SO.0001 and 025.901SP.0001 and WNC 025.901SL.0001 and 025.901SL.0011 antennas Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.78 W/kg and 1.12 W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-W147 PC with INPAQ 025.901SO.0001 and 025.901SP.0001 and WNC 025.901SL.0001 and 025.901SL.0011 antennas Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.55 W/kg and 1.60 W/kg respectively. This change establishes portable category SAR conditions for the Dell model P157G PC with WNC WTN291000L and WTN291000R antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.19 W/kg and 1.34 W/kg respectively. This change establishes portable category SAR conditions for the Dell model P117F PC with SPEED F-0G-FS-6123-001 and F-0G-FS-6123-002 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 1.34W/kg respectively. This change establishes portable category SAR conditions for the Dell model P117F PC with SPEED F-0G-FS-6123-001 and F-0G-FS-6123-002 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 1.60W/kg respectively. This change establishes portable category SAR conditions for the Dell model P157G PC with WNC WTN291000L and WTN291000R antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.15 W/kg and 1.31 W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-W147 PC with INPAQ 025.901SO.0001 and 025.901SP.0001 and WNC 025.901SL.0001 and 025.901SL.0011 antennas Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.84W/kg and 1.60W/kg respectively. This change establishes portable category SAR conditions for the Dell model P157G PC with WNC WTN291000L and WTN291000R antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.12 W/kg and 1.12 W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-W147 PC with INPAQ 025.901SO.0001 and 025.901SP.0001 and WNC 025.901SL.0001 and 025.901SL.0011 antennas Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.95W/kg and1.57W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C157 PC with WNC 48EABP01.SGCLOC and 48EABP02.SGCLOC and HTK 219HCTN12198 and 219HCTN12197 antennas. The WLAN TAS feature is enabled. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.80 W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C160 PC with WLAN TAS implementation with WNC 81EABP15.G21 and 81EABP15.G22 and HighTek 0ACCN021019N and 0ACCN021020N antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 0.80W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C160 PC with WLAN TAS implementation with WNC 81EABP15.G21 and 81EABP15.G22 and HighTek 0ACCN021019N and 0ACCN021020N antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.85W/kg and 1.57W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C157 PC with WNC 48EABP01.SGCLOC and 48EABP02.SGCLOC and HTK 219HCTN12198 and 219HCTN12197 antennas. The WLAN TAS feature is enabled. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.93W/kg and 0.80W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C160 PC with WLAN TAS implementation with WNC 81EABP15.G21 and 81EABP15.G22 and HighTek 0ACCN021019N and 0ACCN021020N antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.37W/kg and 0.80W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C160 PC with WLAN TAS implementation with WNC 81EABP15.G21 and 81EABP15.G22 and High-Tek 0ACCN021019N and 0ACCN021020N antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08W/kg and 1.57W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C157 PC with WNC 48EABP01.SGCLOC and 48EABP02.SGCLOC and HTK 219HCTN12198 and 219HCTN12197 antennas. The WLAN TAS feature is enabled. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.51 W/kg and 1.57 W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C157 PC with WNC 48EABP01.SGCLOC and 48EABP02.SGCLOC and HTK 219HCTN12198 and 219HCTN12197 antennas. The WLAN TAS feature is enabled. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.57W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model ThinkBook 15 G4 IAP PC with Southstar DC33002O200 and DC33002O210 and High-Tek DC33002O300 and DC33002O310 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08W/kg and 1.57W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model ThinkBook 15 G4 IAP PC with Southstar DC33002O200 and DC33002O210 and High-Tek DC33002O300 and DC33002O310 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.95 W/kg and 1.57 W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model ThinkBook 15 G4 IAP PC with Southstar DC33002O200 and DC33002O210 and High-Tek DC33002O300 and DC33002O310 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.99W/kg and 1.57W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model ThinkBook 15 G4 IAP PC with Southstar DC33002O200 and DC33002O210 and High-Tek DC33002O300 and DC33002O310 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.23W/kg and 1.45W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model 14IAL7 PC with AWAN DC33001XQ00 and DC33001XQ10 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.13 W/kg and 1.45 W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model 14IAL7 PC with AWAN DC33001XQ00 and DC33001XQ10 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.45W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model 14IAL7 PC with AWAN DC33001XQ00 and DC33001XQ10 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.38W/kg and 1.45W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model 14IAL7 PC with AWAN DC33001XQ00 and DC33001XQ10 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.06W/kg and 1.08W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I47C PC with HONG-BO 6036B0316701 and WNC 6036B0315601 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.43W/kg and 1.08W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I47C PC with HONG-BO 6036B0316701 and WNC 6036B0315601 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.08W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I47C PC with HONG-BO 6036B0316701 and WNC 6036B0315601 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.13 W/kg and 1.08 W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I47C PC with HONG-BO 6036B0316701 and WNC 6036B0315601 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.39W/kg and 1.48W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model IP Flex 5 Chrome 14IAU7 PC with Speed DC33001W200 and LUXSHARE-ICT and DC33001W100 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.35W/kg and 1.48W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model IP Flex 5 Chrome 14IAU7 PC with Speed DC33001W200 and LUXSHARE-ICT and DC33001W100 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.49 W/kg and 1.48 W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model IP Flex 5 Chrome 14IAU7 PC with Speed DC33001W200 and LUXSHARE-ICT and DC33001W100 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.76W/kg and 1.48W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model IP Flex 5 Chrome 14IAU7 PC with Speed DC33001W200 and LUXSHARE-ICT and DC33001W100 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.34 W/kg and 1.45 W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C159 PC with WNC 81EABP15.G19 and 81EABP15.G20 and High-Tek 0ACCN021017N and 0ACCN021018N antennas. TAS feature is enabled. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.43W/kg and 1.45W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C159 PC with WNC 81EABP15.G19 and 81EABP15.G20 and High-Tek 0ACCN021017N and 0ACCN021018N antennas. TAS feature is enabled. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.60W/kg and 1.45W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C159 PC with WNC 81EABP15.G19 and 81EABP15.G20 and High-Tek 0ACCN021017N and 0ACCN021018N antennas. TAS feature is enabled. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.45W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C159 PC with WNC 81EABP15.G19 and 81EABP15.G20 and High-Tek 0ACCN021017N and 0ACCN021018N antennas. TAS feature is enabled. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.12W/kg and 1.04W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model ThinkBook 14s Yoga G2 IAP PC with SOUTHSTAR DC33002O400 and DC33002O410 and High-Tek DC33002O500 and DC33002O510 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.46W/kg and 1.04W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model ThinkBook 14s Yoga G2 IAP PC with SOUTHSTAR DC33002O400 and DC33002O410 and High-Tek DC33002O500 and DC33002O510 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.31 W/kg and 1.04 W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model ThinkBook 14s Yoga G2 IAP PC with SOUTHSTAR DC33002O400 and DC33002O410 and High-Tek DC33002O500 and DC33002O510 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.72W/kg and 1.04W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model ThinkBook 14s Yoga G2 IAP PC with SOUTHSTAR DC33002O400 and DC33002O410 and High-Tek DC33002O500 and DC33002O510 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.19W/kg and 0.27W/kg respectively. This change establishes portable category SAR conditions for the Dell model P158G PC with Hong-BO 025.901XO.0011 antenna. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.01W/kg and 0.27W/kg respectively. This change establishes portable category SAR conditions for the Dell model P158G PC with Hong-BO 025.901XO.0011 antenna. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 0.27W/kg respectively. This change establishes portable category SAR conditions for the Dell model P158G PC with Hong-BO 025.901XO.0011 antenna. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04 W/kg and 0.27 W/kg respectively. This change establishes portable category SAR conditions for the Dell model P158G PC with Hong-BO 025.901XO.0011 antenna. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.65W/kg and 1.36W/kg respectively. This change establishes portable category SAR conditions for the Dell model P159G PC with WNC 81EABJ15.G27 and 81EABJ15.G28 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.70W/kg and 1.36W/kg respectively. This change establishes portable category SAR conditions for the Dell model P159G PC with WNC 81EABJ15.G27 and 81EABJ15.G28 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.36W/kg respectively. This change establishes portable category SAR conditions for the Dell model P159G PC with WNC 81EABJ15.G27 and 81EABJ15.G28 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.88 W/kg and 1.36 W/kg respectively. This change establishes portable category SAR conditions for the Dell model P159G PC with WNC 81EABJ15.G27 and 81EABJ15.G28 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.77W/kg and 1.47W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C155 PC with INPAQ DC33002K3C0 antenna. TAS feature is enabled. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.18W/kg and 1.47W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C155 PC with INPAQ DC33002K3C0 antenna. TAS feature is enabled. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.37W/kg and 1.47W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C155 PC with INPAQ DC33002K3C0 antenna. TAS feature is enabled. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.49 W/kg and 1.47 W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C155 PC with INPAQ DC33002K3C0 antenna. TAS feature is enabled. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.44W/kg and 1.41W/kg respectively. This change establishes portable category SAR conditions for the Asus model PUX3402ZA/UX3402Z/RX3402Z/BX3402Z/Q409Z PC with INPAQ WA-P-LELE-04-014 ZTX 2.00001568 antennas. The WLAN TAS feature is enabled. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.41 W/kg and 1.57 W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-W153 PC with INPAQ 025.901Z9.0001 and 025.901ZA.0001 and HTK 025.901Z7.0001 and 025.901Z8.0001 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.68W/kg and 1.41W/kg respectively. This change establishes portable category SAR conditions for the Asus model PUX3402ZA/UX3402Z/RX3402Z/BX3402Z/Q409Z PC with INPAQ WA-P-LELE-04-014 ZTX 2.00001568 antennas. The WLAN TAS feature is enabled. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.17W/kg and 1.57W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-W153 PC with INPAQ 025.901Z9.0001 and 025.901ZA.0001 and HTK 025.901Z7.0001 and 025.901Z8.0001 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.34 W/kg and 1.41 W/kg respectively. This change establishes portable category SAR conditions for the Asus model PUX3402ZA/UX3402Z/RX3402Z/BX3402Z/Q409Z PC with INPAQ WA-P-LELE-04-014 and ZTX 2.00001568 antennas. The WLAN TAS feature is enabled. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.80W/kg and 1.57W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-W153 PC with INPAQ 025.901Z9.0001 and 025.901ZA.0001 and HTK 025.901Z7.0001 and 025.901Z8.0001 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.16W/kg and 1.41W/kg respectively. This change establishes portable category SAR conditions for the Asus model PUX3402ZA/UX3402Z/RX3402Z/BX3402Z/Q409Z PC with INPAQ WA-P-LELE-04-014 ZTX 2.00001568 antennas. The WLAN TAS feature is enabled. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.76W/kg and 1.57W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-W153 PC with INPAQ 025.901Z9.0001 and 025.901ZA.0001 and HTK 025.901Z7.0001 and 025.901Z8.0001 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.45 W/kg and 1.35 W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model 16IAP7 PC with AWAN DC33001XR00 and DC33001XR10 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are0.78W/kg and 1.35W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model 16IAP7 PC with AWAN DC33001XR00 and DC33001XR10 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.18W/kg and 1.35W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model 16IAP7 PC with AWAN DC33001XR00 and DC33001XR10 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.12W/kg and 1.35W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model 16IAP7 PC with AWAN DC33001XR00 and DC33001XR10 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.53W/kg and 1.13W/kg respectively. This change establishes portable category SAR conditions for the Dell model P119F PC with WNC 81EABJ15.G21 antenna. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.13W/kg respectively. This change establishes portable category SAR conditions for the Dell model P119F PC with WNC 81EABJ15.G21 antenna. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.39 W/kg and 1.13 W/kg respectively. This change establishes portable category SAR conditions for the Dell model P119F PC with WNC 81EABJ15.G21 antenna. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.13W/kg respectively. This change establishes portable category SAR conditions for the Dell model P119F PC with WNC 81EABJ15.G21 antenna. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.12W/kg and 1.30W/kg respectively. This change establishes portable category SAR conditions for the Dell model P117F PC with SPEED F-0G-FS-6122-001-00 and F-0G-FS-6122-002-00 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.54W/kg and 1.30W/kg respectively. This change establishes portable category SAR conditions for the Dell model P117F PC with SPEED F-0G-FS-6122-001-00 and F-0G-FS-6122-002-00 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.30W/kg respectively. This change establishes portable category SAR conditions for the Dell model P117F PC with SPEED F-0G-FS-6122-001-00 and F-0G-FS-6122-002-00 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.47 W/kg and 1.30 W/kg respectively. This change establishes portable category SAR conditions for the Dell model P117F PC with SPEED F-0G-FS-6122-001-00 and F-0G-FS-6122-002-00 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.15W/kg and 1.08W/kg respectively. This change establishes portable category SAR conditions for the Dell model P161G PC with Hong-BO 260-29100 and 260-29101 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.43W/kg and 1.08W/kg respectively. This change establishes portable category SAR conditions for the Dell model P161G PC with Hong-BO 260-29100 and 260-29101 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 1.08 W/kg respectively. This change establishes portable category SAR conditions for the Dell model P161G PC with Hong-BO 260-29100 and 260-29101 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.08W/kg respectively. This change establishes portable category SAR conditions for the Dell model P161G PC with Hong-BO 260-29100 and 260-29101 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.93W/kg and 0.80W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C160 PC with WNC 81EABP15.G21 and 81EABP15.G22 and High-Tek 0ACCN021019N and 0ACCN021020N antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.37W/kg and 0.80W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C160 PC with WNC 81EABP15.G21 and 81EABP15.G22 and High-Tek 0ACCN021019N and 0ACCN021020N antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.80 W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C160 PC with WNC 81EABP15.G21 and 81EABP15.G22 and High- Tek 0ACCN021019N and 0ACCN021020N antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 0.80W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C160 PC with WNC 81EABP15.G21 and 81EABP15.G22 and High- Tek 0ACCN021019N and 0ACCN021020N antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.54W/kg and 1.00W/kg respectively. This change establishes portable category SAR conditions for the Dell model P139G PC with WNC 025.901RG.0011 and 025.901RG.0011 and Hong-BO 260-29064 and 260-29064 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.09W/kg and 1.00W/kg respectively. This change establishes portable category SAR conditions for the Dell model P139G PC with WNC 025.901RG.0011 and 025.901RG.0011 and Hong-BO 260-29064 and 260-29064 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.46W/kg and 1.00W/kg respectively. This change establishes portable category SAR conditions for the Dell model P139G PC with WNC 025.901RG.0011 and 025.901RG.0011 and Hong-BO 260-29064 and 260-29064 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 1.00 W/kg respectively. This change establishes portable category SAR conditions for the Dell model P139G PC with WNC 025.901RG.0011 and 025.901RG.0011 and Hong-BO 260-29064 and 260-29064 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08W/kg and 1.57W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C157 PC with WNC 48EABP01.SGCLOC and 48EABP02.SGCLOC and HTK 219HCTN12198 and 219HCTN12197 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.51 W/kg and 1.57 W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C157 PC with WNC 48EABP01.SGCLOC and 48EABP02.SGCLOC and HTK 219HCTN12198 and 219HCTN12197 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.95W/kg and 1.57W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C157 PC with WNC 48EABP01.SGCLOC and 48EABP02.SGCLOC and HTK 219HCTN12198 and 219HCTN12197 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 1.37W/kg respectively. This change establishes portable category SAR conditions for the Dell model P139G PC with WNC 025.901RE.0011 and 025.901RF.0011 and Hong-BO 260-29062 and 260-29063 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.37W/kg respectively. This change establishes portable category SAR conditions for the Dell model P139G PC with WNC 025.901RE.0011 and 025.901RF.0011 and Hong-BO 260-29062 and 260-29063 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.85W/kg and 1.57W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C157 PC with WNC 48EABP01.SGCLOC and 48EABP02.SGCLOC and HTK 219HCTN12198 and 219HCTN12197 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.35 W/kg and 1.37 W/kg respectively. This change establishes portable category SAR conditions for the Dell model P139G PC with WNC 025.901RE.0011 and 025.901RF.0011 and Hong-BO 260-29062 and 260-29063 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.12W/kg and 1.37W/kg respectively. This change establishes portable category SAR conditions for the Dell model P139G PC with WNC 025.901RE.0011 and 025.901RF.0011 and Hong-BO 260-29062 and 260-29063 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.49 W/kg and 1.60 W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C154 PC with INPAQ DC33002JZ00 antenna. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.81W/kg and 1.60W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C154 PC with INPAQ DC33002JZ00 antenna. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.52W/kg and 1.60W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C154 PC with INPAQ DC33002JZ00 antenna. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.60W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C154 PC with INPAQ DC33002JZ00 antenna. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08W/kg and 1.31W/kg respectively. This change establishes portable category SAR conditions for the Dell model P157G PC with WNC 81EABJ15.G45 and 81EABJ15.G46 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.82 W/kg and 1.31 W/kg respectively. This change establishes portable category SAR conditions for the Dell model P157G PC with WNC 81EABJ15.G45 and 81EABJ15.G46 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.58W/kg and 1.31W/kg respectively. This change establishes portable category SAR conditions for the Dell model P157G PC with WNC 81EABJ15.G45 and 81EABJ15.G46 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.31W/kg respectively. This change establishes portable category SAR conditions for the Dell model P157G PC with WNC 81EABJ15.G45 and 81EABJ15.G46 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.40W/kg and 1.28W/kg respectively. This change establishes portable category SAR conditions for the Samsung models NP641BEF, NP641BED PC with WNC BA42-00746A and BA42-00747A antenna. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.12 W/kg and 1.28 W/kg respectively. This change establishes portable category SAR conditions for the Samsung models NP641BEF, NP641BED PC with WNC BA42-00746A and BA42-00747A antenna. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.13W/kg and 1.28W/kg respectively. This change establishes portable category SAR conditions for the Samsung models NP641BEF, NP641BED PC with WNC BA42-00746A and BA42-00747A antenna. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.15W/kg and 1.28W/kg respectively. This change establishes portable category SAR conditions for the Samsung models NP641BEF, NP641BED PC with WNC BA42-00746A and BA42-00747A antenna. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 1.48W/kg respectively. This change establishes portable category SAR conditions for the Dell model P109F PC with WNC 81EABJ15.G53 and 81EABJ15.G54 and Hong-Bo 260-24394 and 260-24393 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.48W/kg respectively. This change establishes portable category SAR conditions for the Dell model P109F PC with WNC 81EABJ15.G53 and 81EABJ15.G54 and Hong-Bo 260-24394 and 260-24393 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.48W/kg respectively. This change establishes portable category SAR conditions for the Dell model P109F PC with WNC 81EABJ15.G53 and 81EABJ15.G54 and Hong-Bo 260-24394 and 260-24393 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.16 W/kg and 1.48 W/kg respectively. This change establishes portable category SAR conditions for the Dell model P109F PC with WNC 81EABJ15.G53 and 81EABJ15.G54 and Hong-Bo 260-24394 and 260-24393 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10 W/kg and 1.28 W/kg respectively. This change establishes portable category SAR conditions for the Dell model P150G PC with SPEED F-0G-FH-6144-003-00 and WNC C33002L72L antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.40W/kg and 1.28W/kg respectively. This change establishes portable category SAR conditions for the Dell model P150G PC with SPEED F-0G-FH-6144-003-00 and WNC C33002L72L antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.28W/kg respectively. This change establishes portable category SAR conditions for the Dell model P150G PC with SPEED F-0G-FH-6144-003-00 and WNC C33002L72L antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.63W/kg and 1.28W/kg respectively. This change establishes portable category SAR conditions for the Dell model P150G PC with SPEED F-0G-FH-6144-003-00 and WNC C33002L72L antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.14 W/kg and 1.32 W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I45C PC with TAS feature enabled. Hong-Bo 6036B0314201 & 6036B0316301, 6036B0314301& 6036B0314401 and WNC 6036B0316401 & 6036B0313501, 6036B0313601 & 6036B0313701 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.54W/kg and 1.32W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I45C PC with TAS feature enabled. Hong-Bo 6036B0314201 and 6036B0316301, 6036B0314301 and 6036B0314401 and WNC 6036B0316401 and 6036B0313501, 6036B0313601 and 6036B0313701 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.32W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I45C PC with TAS feature enabled. Hong-Bo 6036B0314201 and 6036B0316301, 6036B0314301 and 6036B0314401 and WNC 6036B0316401 and 6036B0313501, 6036B0313601 and 6036B0313701 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.21W/kg and 1.32W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I45C PC with TAS feature enabled. Hong-Bo 6036B0314201 & 6036B0316301, 6036B0314301& 6036B0314401 and WNC 6036B0316401 & 6036B0313501, 6036B0313601 & 6036B0313701 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.47W/kg and 0.87W/kg respectively. This change establishes portable category SAR conditions for the Dell model P111F PC with WNC 81EABJ15.G60 and 81EABJ15.G23 and AWAN AXP8Y DC33002 -100009 and AXP8Y DC33002IV -100004 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07 W/kg and 0.87 W/kg respectively. This change establishes portable category SAR conditions for the Dell model P111F PC with WNC 81EABJ15.G60 and 81EABJ15.G23 and AWAN AXP8Y DC33002 -100009 and AXP8Y DC33002IV -100004 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 0.87W/kg respectively. This change establishes portable category SAR conditions for the Dell model P111F PC with WNC 81EABJ15.G60 and 81EABJ15.G23 and AWAN AXP8Y DC33002 -100009 and AXP8Y DC33002IV -100004 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.53W/kg and 0.87W/kg respectively. This change establishes portable category SAR conditions for the Dell model P111F PC with WNC 81EABJ15.G60 and 81EABJ15.G23 and AWAN AXP8Y DC33002 -100009 and AXP8Y DC33002IV -100004 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.58 W/kg and 1.43 W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I46C PC with Hong-Bo 6036B0312901 and 6036B0313001 and WNC 6036B0312401 and 6036B0312501 antennas. The WLAN TAS feature is enabled for this application. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.16W/kg and 1.43W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I46C PC with Hong-Bo 6036B0312901 and 6036B0313001 and WNC 6036B0312401 and 6036B0312501 antennas. The WLAN TAS feature is enabled for this application. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.65W/kg and 1.43W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I46C PC with Hong-Bo 6036B0312901 and 6036B0313001 and WNC 6036B0312401 and 6036B0312501 antennas. The WLAN TAS feature is enabled for this application. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.34W/kg and 1.43W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I46C PC with Hong-Bo 6036B0312901 and 6036B0313001 and WNC 6036B0312401 and 6036B0312501 antennas. The WLAN TAS feature is enabled for this application. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.12W/kg and 1.44W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-W146 ( Slinky 1.2) PC with INPAQ 025.901SM.0021 and 025.901SM.0031 and WNC 025.901SM.0001 and 025.901SM.0011 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.34 W/kg and 1.60 W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-W146 ( Slinky 1.2) PC with INPAQ 025.901SM.0021 and 025.901SM.0031 and WNC 025.901SM.0001 and 025.901SM.0011 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.32W/kg and 1.44W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-W146 ( Slinky 1.2) PC with INPAQ 025.901SM.0021 and 025.901SM.0031 and WNC 025.901SM.0001 and 025.901SM.0011 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.08W/kg and 1.44W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-W146 ( Slinky 1.2) PC with INPAQ 025.901SM.0021 and 025.901SM.0031 and WNC 025.901SM.0001 and 025.901SM.0011 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.94 W/kg and 1.25 W/kg respectively. This change is to request approval for portable category specific host notebook PC, Intel RC57 with Auden ANTRP5C119-1801 (Tx1) and ANTRP5C119-1802 (Tx2) antennas. And decrease in the WLAN Output Power through BIOS respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.34 W/kg and 1.53 W/kg respectively. This change is to request approval for portable category specific host notebook PC, Intel RC57 with Auden ANTRP5C119-1801 (Tx1) and ANTRP5C119-1802 (Tx2) antennas. And decrease in the WLAN Output Power through BIOS respectively. Antenna is of the same type and higher gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.20 W/kg and 1.53 W/kg respectively. This change is to request approval for portable category specific host notebook PC, Intel RC57 with Auden ANTRP5C119-1801 (Tx1) and ANTRP5C119-1802 (Tx2) antennas. And decrease in the WLAN Output Power through BIOS respectively. Antenna is of the same type and higher gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.31W/kg and 1.27W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-W148 PC with High-Tek 025.901S2.0011 and 025.901S2.0001 and WNC 025.901S2.0031 and 025.901S2.0021 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.27W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-W148 PC with High-Tek 025.901S2.0011 and 025.901S2.0001 and WNC 025.901S2.0031 and 025.901S2.0021 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.25W/kg and 1.27W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-W148 PC with High-Tek 025.901S2.0011 and 025.901S2.0001 and WNC 025.901S2.0031 and 025.901S2.0021 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.36 W/kg and 0.74 W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-W148 PC with High-Tek 025.901S2.0011 and 025.901S2.0001 and WNC 025.901S2.0031 and 025.901S2.0021 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.34 W/kg and 0.68 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 5mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This filing meets KDB 447498 as a mobile device. Addition an new antenna, antenna type is different from the original application. The antenna gain is <= original. (Antenna type: Dipole Antenna / 6XD Grant). Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.29W/kg and 1.35W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-W149 PC with WNC 025.901S3.0011 and 025.901S3.0001 and High-Tek 025.901S3.0031 and 025.901S3.0021 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.41 W/kg and 0.88 W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-W149 PC with WNC 025.901S3.0011 and 025.901S3.0001 and High-Tek 025.901S3.0031 and 025.901S3.0021 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.16W/kg and 1.35W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-W149 PC with WNC 025.901S3.0011 and 025.901S3.0001 and High-Tek 025.901S3.0031 and 025.901S3.0021 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.35W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-W149 PC with WNC 025.901S3.0011 and 025.901S3.0001 and High-Tek 025.901S3.0031 and 025.901S3.0021 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.44W/kg and 1.41W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.68W/kg and 1.41W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.16W/kg and 1.41W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.67W/kg and 1.42W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.53W/kg and 1.42W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and 1.42W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. Addition of new antenna, antenna type is different with the original application. Antenna type - Wieson Dipole ARY121-0009-002-H0, tested at 20cm.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. Addition of new antenna, antenna type is different from the original application. Antenna type - Wieson Dipole ARY121-0009-002-H0 tested at 20cm.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. Addition of new antenna, antenna type is different with the original application. Antenna type - Wieson Dipole ARY121-0009-002-H0, tested at 20cm.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.01W/kg and 1.14W/kg respectively. Addition of a new antenna, antenna type is different with the original application. (Antenna type: Hong Bo Monopole Antenna P/N 260-25083) tested at 29mm. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.09W/kg and 1.14W/kg respectively. Addition of a new antenna, antenna type is different with the original application. (Antenna type: Hong Bo Monopole Antenna P/N 260-25083) tested at 29mm. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.58W/kg and 1.14W/kg respectively. Addition of a new antenna, antenna type is different with the original application. (Antenna type: Hong Bo Monopole Antenna P/N 260-25083) tested at 29mm. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name Intel Corporation S.A.S.
various Intel Corporation - Oregon CPRS Labs
various DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
various SPORTON International Inc.
various EMITECH Montpellier
various Name N**** A********
various F**** B****
various M******** L********
various A******** C******
various O******** H********
various Telephone Number 00334********
various 50361********
various +886-******** Extension:
various +886-******** Extension:
various 33-4-********
various 00334********
various Fax Number 50369********
various +886-********
various 33-4-********
various 00334********
various E-mail n******@intel.com
various f******@intel.com
various m******@dekra.com
various a******@sporton.com.tw
various o******@emitech-group.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15E CC MO 5955 7115 0.003
2 2 15E CC MO 5965 7085 0.007
2 3 15E CC MO 5985 7025 0.012
2 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC 2402 2480 0.009
3 2 15C CC MO 2412 2472 0.979
3 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15E CC MO 5180 5240 0.152
4 2 15E CC MO 5190 5230 0.182
4 3 15E CC MO 5210 5210 0.093
4 4 15E CC MO 5250 5250 0.064
4 5 15E CC MO ND 5260 5320 0.152
4 6 15E CC MO ND 5270 5310 0.194
4 7 15E CC MO ND 5290 5290 0.088
4 8 15E CC MO ND 5500 5700 0.154
4 9 15E CC MO ND 5510 5670 0.249
4 1 15E CC MO ND 5710 5710 0.122
4 11 15E CC MO ND 5720 5720 0.104
4 12 15E CC MO ND 5530 5690 0.215
4 13 15E CC MO 5745 5825 0.254
4 14 15E CC MO 5755 5795 0.257
4 15 15E CC MO 5775 5775 0.212
4 16 15E CC EP MO 5845 5885 0.296
4 17 15E CC EP MO 5835 5875 0.64
4 18 15E CC EP MO 5855 5855 0.676
4 19 15E CC EP MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15E CC MO 5180 5240 0.152
5 2 15E CC MO 5190 5230 0.182
5 3 15E CC MO 5210 5210 0.093
5 4 15E CC MO 5250 5250 0.064
5 5 15E CC MO ND 5260 5320 0.152
5 6 15E CC MO ND 5270 5310 0.194
5 7 15E CC MO ND 5290 5290 0.088
5 8 15E CC MO ND 5500 5700 0.154
5 9 15E CC MO ND 5510 5670 0.249
5 1 15E CC MO ND 5710 5710 0.122
5 11 15E CC MO ND 5720 5720 0.104
5 12 15E CC MO ND 5530 5690 0.215
5 13 15E CC MO 5745 5825 0.254
5 14 15E CC MO 5755 5795 0.257
5 15 15E CC MO 5775 5775 0.212
5 16 15E CC EP MO 5845 5885 0.296
5 17 15E CC EP MO 5835 5875 0.64
5 18 15E CC EP MO 5855 5855 0.676
5 19 15E CC EP MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15E CC MO 5955 7115 0.003
6 2 15E CC MO 5965 7085 0.007
6 3 15E CC MO 5985 7025 0.012
6 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC 2402 2480 0.009
7 2 15C CC MO 2412 2472 0.979
7 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15C CC 2402 2480 0.009
9 2 15C CC MO 2412 2472 0.979
9 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15E CC MO 5180 5240 0.152
10 2 15E CC MO 5190 5230 0.182
10 3 15E CC MO 5210 5210 0.093
10 4 15E CC MO 5250 5250 0.064
10 5 15E CC MO ND 5260 5320 0.152
10 6 15E CC MO ND 5270 5310 0.194
10 7 15E CC MO ND 5290 5290 0.088
10 8 15E CC MO ND 5500 5700 0.154
10 9 15E CC MO ND 5510 5670 0.249
10 1 15E CC MO ND 5710 5710 0.122
10 11 15E CC MO ND 5720 5720 0.104
10 12 15E CC MO ND 5530 5690 0.215
10 13 15E CC MO 5745 5825 0.254
10 14 15E CC MO 5755 5795 0.257
10 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15E CC MO 5955 7115 0.003
12 2 15E CC MO 5965 7085 0.007
12 3 15E CC MO 5985 7025 0.012
12 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15E CC MO 5180 5240 0.152
13 2 15E CC MO 5190 5230 0.182
13 3 15E CC MO 5210 5210 0.093
13 4 15E CC MO 5250 5250 0.064
13 5 15E CC MO ND 5260 5320 0.152
13 6 15E CC MO ND 5270 5310 0.194
13 7 15E CC MO ND 5290 5290 0.088
13 8 15E CC MO ND 5500 5700 0.154
13 9 15E CC MO ND 5510 5670 0.249
13 1 15E CC MO ND 5710 5710 0.122
13 11 15E CC MO ND 5720 5720 0.104
13 12 15E CC MO ND 5530 5690 0.215
13 13 15E CC MO 5745 5825 0.254
13 14 15E CC MO 5755 5795 0.257
13 15 15E CC MO 5775 5775 0.212
13 16 15E CC EP MO 5845 5885 0.296
13 17 15E CC EP MO 5835 5875 0.64
13 18 15E CC EP MO 5855 5855 0.676
13 19 15E CC EP MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15E CC MO 5955 7115 0.003
14 2 15E CC MO 5965 7085 0.007
14 3 15E CC MO 5985 7025 0.012
14 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15C CC 2402 2480 0.009
15 2 15C CC MO 2412 2472 0.979
15 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15E CC MO 5180 5240 0.152
17 2 15E CC MO 5190 5230 0.182
17 3 15E CC MO 5210 5210 0.093
17 4 15E CC MO 5250 5250 0.064
17 5 15E CC MO ND 5260 5320 0.152
17 6 15E CC MO ND 5270 5310 0.194
17 7 15E CC MO ND 5290 5290 0.088
17 8 15E CC MO ND 5500 5700 0.154
17 9 15E CC MO ND 5510 5670 0.249
17 1 15E CC MO ND 5710 5710 0.122
17 11 15E CC MO ND 5720 5720 0.104
17 12 15E CC MO ND 5530 5690 0.215
17 13 15E CC MO 5745 5825 0.254
17 14 15E CC MO 5755 5795 0.257
17 15 15E CC MO 5775 5775 0.212
17 16 15E CC EP MO 5845 5885 0.296
17 17 15E CC EP MO 5835 5875 0.64
17 18 15E CC EP MO 5855 5855 0.676
17 19 15E CC EP MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
18 1 15E CC MO 5955 7115 0.003
18 2 15E CC MO 5965 7085 0.007
18 3 15E CC MO 5985 7025 0.012
18 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
19 1 15C CC 2402 2480 0.009
19 2 15C CC MO 2412 2472 0.979
19 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
20 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
21 1 15C CC 2402 2480 0.009
21 2 15C CC MO 2412 2472 0.979
21 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
22 1 15E CC MO 5180 5240 0.152
22 2 15E CC MO 5190 5230 0.182
22 3 15E CC MO 5210 5210 0.093
22 4 15E CC MO 5250 5250 0.064
22 5 15E CC MO ND 5260 5320 0.152
22 6 15E CC MO ND 5270 5310 0.194
22 7 15E CC MO ND 5290 5290 0.088
22 8 15E CC MO ND 5500 5700 0.154
22 9 15E CC MO ND 5510 5670 0.249
22 1 15E CC MO ND 5710 5710 0.122
22 11 15E CC MO ND 5720 5720 0.104
22 12 15E CC MO ND 5530 5690 0.215
22 13 15E CC MO 5745 5825 0.254
22 14 15E CC MO 5755 5795 0.257
22 15 15E CC MO 5775 5775 0.212
22 16 15E CC MO 5845 5885 0.296
22 17 15E CC MO 5835 5875 0.64
22 18 15E CC MO 5855 5855 0.676
22 19 15E CC MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
23 1 15E CC MO 5955 7115 0.003
23 2 15E CC MO 5965 7085 0.007
23 3 15E CC MO 5985 7025 0.012
23 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
24 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
25 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
26 1 15E CC MO 5180 5240 0.152
26 2 15E CC MO 5190 5230 0.182
26 3 15E CC MO 5210 5210 0.093
26 4 15E CC MO 5250 5250 0.064
26 5 15E CC MO ND 5260 5320 0.152
26 6 15E CC MO ND 5270 5310 0.194
26 7 15E CC MO ND 5290 5290 0.088
26 8 15E CC MO ND 5500 5700 0.154
26 9 15E CC MO ND 5510 5670 0.249
26 1 15E CC MO ND 5710 5710 0.122
26 11 15E CC MO ND 5720 5720 0.104
26 12 15E CC MO ND 5530 5690 0.215
26 13 15E CC MO 5745 5825 0.254
26 14 15E CC MO 5755 5795 0.257
26 15 15E CC MO 5775 5775 0.212
26 16 15E CC EP MO 5845 5885 0.296
26 17 15E CC EP MO 5835 5875 0.64
26 18 15E CC EP MO 5855 5855 0.676
26 19 15E CC EP MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
27 1 15E CC MO 5955 7115 0.003
27 2 15E CC MO 5965 7085 0.007
27 3 15E CC MO 5985 7025 0.012
27 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
28 1 15C CC 2402 2480 0.009
28 2 15C CC MO 2412 2472 0.979
28 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
29 1 15E CC MO 5180 5240 0.152
29 2 15E CC MO 5190 5230 0.182
29 3 15E CC MO 5210 5210 0.093
29 4 15E CC MO 5250 5250 0.064
29 5 15E CC MO ND 5260 5320 0.152
29 6 15E CC MO ND 5270 5310 0.194
29 7 15E CC MO ND 5290 5290 0.088
29 8 15E CC MO ND 5500 5700 0.154
29 9 15E CC MO ND 5510 5670 0.249
29 1 15E CC MO ND 5710 5710 0.122
29 11 15E CC MO ND 5720 5720 0.104
29 12 15E CC MO ND 5530 5690 0.215
29 13 15E CC MO 5745 5825 0.254
29 14 15E CC MO 5755 5795 0.257
29 15 15E CC MO 5775 5775 0.212
29 16 15E CC EP MO 5845 5885 0.296
29 17 15E CC EP MO 5835 5875 0.64
29 18 15E CC EP MO 5855 5855 0.676
29 19 15E CC EP MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
30 1 15E CC MO 5955 7115 0.003
30 2 15E CC MO 5965 7085 0.007
30 3 15E CC MO 5985 7025 0.012
30 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
31 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
32 1 15C CC 2402 2480 0.009
32 2 15C CC MO 2412 2472 0.979
32 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
33 1 15E CC MO 5955 7115 0.003
33 2 15E CC MO 5965 7085 0.007
33 3 15E CC MO 5985 7025 0.012
33 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
34 1 15C CC 2402 2480 0.009
34 2 15C CC MO 2412 2472 0.979
34 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
35 1 15E CC MO 5180 5240 0.152
35 2 15E CC MO 5190 5230 0.182
35 3 15E CC MO 5210 5210 0.093
35 4 15E CC MO 5250 5250 0.064
35 5 15E CC MO ND 5260 5320 0.152
35 6 15E CC MO ND 5270 5310 0.194
35 7 15E CC MO ND 5290 5290 0.088
35 8 15E CC MO ND 5500 5700 0.154
35 9 15E CC MO ND 5510 5670 0.249
35 1 15E CC MO ND 5710 5710 0.122
35 11 15E CC MO ND 5720 5720 0.104
35 12 15E CC MO ND 5530 5690 0.215
35 13 15E CC MO 5745 5825 0.254
35 14 15E CC MO 5755 5795 0.257
35 15 15E CC MO 5775 5775 0.212
35 16 15E CC EP MO 5845 5885 0.296
35 17 15E CC EP MO 5835 5875 0.64
35 18 15E CC EP MO 5855 5855 0.676
35 19 15E CC EP MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
36 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
37 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
38 1 15E CC MO 5180 5240 0.152
38 2 15E CC MO 5190 5230 0.182
38 3 15E CC MO 5210 5210 0.093
38 4 15E CC MO 5250 5250 0.064
38 5 15E CC MO ND 5260 5320 0.152
38 6 15E CC MO ND 5270 5310 0.194
38 7 15E CC MO ND 5290 5290 0.088
38 8 15E CC MO ND 5500 5700 0.154
38 9 15E CC MO ND 5510 5670 0.249
38 1 15E CC MO ND 5710 5710 0.122
38 11 15E CC MO ND 5720 5720 0.104
38 12 15E CC MO ND 5530 5690 0.215
38 13 15E CC MO 5745 5825 0.254
38 14 15E CC MO 5755 5795 0.257
38 15 15E CC MO 5775 5775 0.212
38 16 15E CC MO 5845 5885 0.296
38 17 15E CC MO 5835 5875 0.64
38 18 15E CC MO 5855 5855 0.676
38 19 15E CC MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
39 1 15C CC 2402 2480 0.009
39 2 15C CC MO 2412 2472 0.979
39 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
40 1 15E CC MO 5955 7115 0.003
40 2 15E CC MO 5965 7085 0.007
40 3 15E CC MO 5985 7025 0.012
40 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
41 1 15E CC MO 5180 5240 0.152
41 2 15E CC MO 5190 5230 0.182
41 3 15E CC MO 5210 5210 0.093
41 4 15E CC MO 5250 5250 0.064
41 5 15E CC MO ND 5260 5320 0.152
41 6 15E CC MO ND 5270 5310 0.194
41 7 15E CC MO ND 5290 5290 0.088
41 8 15E CC MO ND 5500 5700 0.154
41 9 15E CC MO ND 5510 5670 0.249
41 1 15E CC MO ND 5710 5710 0.122
41 11 15E CC MO ND 5720 5720 0.104
41 12 15E CC MO ND 5530 5690 0.215
41 13 15E CC MO 5745 5825 0.254
41 14 15E CC MO 5755 5795 0.257
41 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
42 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
43 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
44 1 15E CC MO 5180 5240 0.152
44 2 15E CC MO 5190 5230 0.182
44 3 15E CC MO 5210 5210 0.093
44 4 15E CC MO 5250 5250 0.064
44 5 15E CC MO ND 5260 5320 0.152
44 6 15E CC MO ND 5270 5310 0.194
44 7 15E CC MO ND 5290 5290 0.088
44 8 15E CC MO ND 5500 5700 0.154
44 9 15E CC MO ND 5510 5670 0.249
44 1 15E CC MO ND 5710 5710 0.122
44 11 15E CC MO ND 5720 5720 0.104
44 12 15E CC MO ND 5530 5690 0.215
44 13 15E CC MO 5745 5825 0.254
44 14 15E CC MO 5755 5795 0.257
44 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
45 1 15C CC 2402 2480 0.009
45 2 15C CC MO 2412 2472 0.979
45 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
46 1 15E CC MO 5955 7115 0.003
46 2 15E CC MO 5965 7085 0.007
46 3 15E CC MO 5985 7025 0.012
46 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
47 1 15E CC MO 5955 7115 0.003
47 2 15E CC MO 5965 7085 0.007
47 3 15E CC MO 5985 7025 0.012
47 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
48 1 15C CC 2402 2480 0.009
48 2 15C CC MO 2412 2472 0.979
48 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
49 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
50 1 15C CC 2402 2480 0.009
50 2 15C CC MO 2412 2472 0.979
50 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
51 1 15E CC MO 5955 7115 0.003
51 2 15E CC MO 5965 7085 0.007
51 3 15E CC MO 5985 7025 0.012
51 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
52 1 15E CC MO 5180 5240 0.152
52 2 15E CC MO 5190 5230 0.182
52 3 15E CC MO 5210 5210 0.093
52 4 15E CC MO 5250 5250 0.064
52 5 15E CC MO ND 5260 5320 0.152
52 6 15E CC MO ND 5270 5310 0.194
52 7 15E CC MO ND 5290 5290 0.088
52 8 15E CC MO ND 5500 5700 0.154
52 9 15E CC MO ND 5510 5670 0.249
52 1 15E CC MO ND 5710 5710 0.122
52 11 15E CC MO ND 5720 5720 0.104
52 12 15E CC MO ND 5530 5690 0.215
52 13 15E CC MO 5745 5825 0.254
52 14 15E CC MO 5755 5795 0.257
52 15 15E CC MO 5775 5775 0.212
52 16 15E CC MO 5845 5885 0.296
52 17 15E CC MO 5835 5875 0.64
52 18 15E CC MO 5855 5855 0.676
52 19 15E CC MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
53 1 15E CC MO 5180 5240 0.152
53 2 15E CC MO 5190 5230 0.182
53 3 15E CC MO 5210 5210 0.093
53 4 15E CC MO 5250 5250 0.064
53 5 15E CC MO ND 5260 5320 0.152
53 6 15E CC MO ND 5270 5310 0.194
53 7 15E CC MO ND 5290 5290 0.088
53 8 15E CC MO ND 5500 5700 0.154
53 9 15E CC MO ND 5510 5670 0.249
53 1 15E CC MO ND 5710 5710 0.122
53 11 15E CC MO ND 5720 5720 0.104
53 12 15E CC MO ND 5530 5690 0.215
53 13 15E CC MO 5745 5825 0.254
53 14 15E CC MO 5755 5795 0.257
53 15 15E CC MO 5775 5775 0.212
53 16 15E CC EP MO 5845 5885 0.296
53 17 15E CC EP MO 5835 5875 0.64
53 18 15E CC EP MO 5855 5855 0.676
53 19 15E CC EP MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
54 1 15C CC 2402 2480 0.009
54 2 15C CC MO 2412 2472 0.979
54 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
55 1 15E CC MO 5955 7115 0.003
55 2 15E CC MO 5965 7085 0.007
55 3 15E CC MO 5985 7025 0.012
55 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
56 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
57 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
58 1 15C CC 2402 2480 0.009
58 2 15C CC MO 2412 2472 0.979
58 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
59 1 15E CC MO 5955 7115 0.003
59 2 15E CC MO 5965 7085 0.007
59 3 15E CC MO 5985 7025 0.012
59 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
60 1 15E CC MO 5180 5240 0.152
60 2 15E CC MO 5190 5230 0.182
60 3 15E CC MO 5210 5210 0.093
60 4 15E CC MO 5250 5250 0.064
60 5 15E CC MO ND 5260 5320 0.152
60 6 15E CC MO ND 5270 5310 0.194
60 7 15E CC MO ND 5290 5290 0.088
60 8 15E CC MO ND 5500 5700 0.154
60 9 15E CC MO ND 5510 5670 0.249
60 1 15E CC MO ND 5710 5710 0.122
60 11 15E CC MO ND 5720 5720 0.104
60 12 15E CC MO ND 5530 5690 0.215
60 13 15E CC MO 5745 5825 0.254
60 14 15E CC MO 5755 5795 0.257
60 15 15E CC MO 5775 5775 0.212
60 16 15E CC EP MO 5845 5885 0.296
60 17 15E CC EP MO 5835 5875 0.64
60 18 15E CC EP MO 5855 5855 0.676
60 19 15E CC EP MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
61 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
62 1 15C CC 2402 2480 0.009
62 2 15C CC MO 2412 2472 0.979
62 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
63 1 15E CC MO 5180 5240 0.152
63 2 15E CC MO 5190 5230 0.182
63 3 15E CC MO 5210 5210 0.093
63 4 15E CC MO 5250 5250 0.064
63 5 15E CC MO ND 5260 5320 0.152
63 6 15E CC MO ND 5270 5310 0.194
63 7 15E CC MO ND 5290 5290 0.088
63 8 15E CC MO ND 5500 5700 0.154
63 9 15E CC MO ND 5510 5670 0.249
63 1 15E CC MO ND 5710 5710 0.122
63 11 15E CC MO ND 5720 5720 0.104
63 12 15E CC MO ND 5530 5690 0.215
63 13 15E CC MO 5745 5825 0.254
63 14 15E CC MO 5755 5795 0.257
63 15 15E CC MO 5775 5775 0.212
63 16 15E CC EP MO 5845 5885 0.296
63 17 15E CC EP MO 5835 5875 0.64
63 18 15E CC EP MO 5855 5855 0.676
63 19 15E CC EP MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
64 1 15E CC MO 5955 7115 0.003
64 2 15E CC MO 5965 7085 0.007
64 3 15E CC MO 5985 7025 0.012
64 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
65 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
66 1 15C CC 2402 2480 0.009
66 2 15C CC MO 2412 2472 0.979
66 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
67 1 15E CC MO 5180 5240 0.152
67 2 15E CC MO 5190 5230 0.182
67 3 15E CC MO 5210 5210 0.093
67 4 15E CC MO 5250 5250 0.064
67 5 15E CC MO ND 5260 5320 0.152
67 6 15E CC MO ND 5270 5310 0.194
67 7 15E CC MO ND 5290 5290 0.088
67 8 15E CC MO ND 5500 5700 0.154
67 9 15E CC MO ND 5510 5670 0.249
67 1 15E CC MO ND 5710 5710 0.122
67 11 15E CC MO ND 5720 5720 0.104
67 12 15E CC MO ND 5530 5690 0.215
67 13 15E CC MO 5745 5825 0.254
67 14 15E CC MO 5755 5795 0.257
67 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
68 1 15E CC MO 5955 7115 0.003
68 2 15E CC MO 5965 7085 0.007
68 3 15E CC MO 5985 7025 0.012
68 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
69 1 15C CC 2402 2480 0.009
69 2 15C CC MO 2412 2472 0.979
69 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
70 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
71 1 15E CC MO 5955 7115 0.003
71 2 15E CC MO 5965 7085 0.007
71 3 15E CC MO 5985 7025 0.012
71 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
72 1 15E CC MO 5180 5240 0.152
72 2 15E CC MO 5190 5230 0.182
72 3 15E CC MO 5210 5210 0.093
72 4 15E CC MO 5250 5250 0.064
72 5 15E CC MO ND 5260 5320 0.152
72 6 15E CC MO ND 5270 5310 0.194
72 7 15E CC MO ND 5290 5290 0.088
72 8 15E CC MO ND 5500 5700 0.154
72 9 15E CC MO ND 5510 5670 0.249
72 1 15E CC MO ND 5710 5710 0.122
72 11 15E CC MO ND 5720 5720 0.104
72 12 15E CC MO ND 5530 5690 0.215
72 13 15E CC MO 5745 5825 0.254
72 14 15E CC MO 5755 5795 0.257
72 15 15E CC MO 5775 5775 0.212
72 16 15E CC EP MO 5845 5885 0.296
72 17 15E CC EP MO 5835 5875 0.64
72 18 15E CC EP MO 5855 5855 0.676
72 19 15E CC EP MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
73 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
74 1 15E CC MO 5955 7115 0.003
74 2 15E CC MO 5965 7085 0.007
74 3 15E CC MO 5985 7025 0.012
74 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
75 1 15E CC MO 5180 5240 0.152
75 2 15E CC MO 5190 5230 0.182
75 3 15E CC MO 5210 5210 0.093
75 4 15E CC MO 5250 5250 0.064
75 5 15E CC MO ND 5260 5320 0.152
75 6 15E CC MO ND 5270 5310 0.194
75 7 15E CC MO ND 5290 5290 0.088
75 8 15E CC MO ND 5500 5700 0.154
75 9 15E CC MO ND 5510 5670 0.249
75 1 15E CC MO ND 5710 5710 0.122
75 11 15E CC MO ND 5720 5720 0.104
75 12 15E CC MO ND 5530 5690 0.215
75 13 15E CC MO 5745 5825 0.254
75 14 15E CC MO 5755 5795 0.257
75 15 15E CC MO 5775 5775 0.212
75 16 15E CC EP MO 5845 5885 0.296
75 17 15E CC EP MO 5835 5875 0.64
75 18 15E CC EP MO 5855 5855 0.676
75 19 15E CC EP MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
76 1 15C CC 2402 2480 0.009
76 2 15C CC MO 2412 2472 0.979
76 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
77 1 15E CC MO 5180 5240 0.152
77 2 15E CC MO 5190 5230 0.182
77 3 15E CC MO 5210 5210 0.093
77 4 15E CC MO 5250 5250 0.064
77 5 15E CC MO ND 5260 5320 0.152
77 6 15E CC MO ND 5270 5310 0.194
77 7 15E CC MO ND 5290 5290 0.088
77 8 15E CC MO ND 5500 5700 0.154
77 9 15E CC MO ND 5510 5670 0.249
77 1 15E CC MO ND 5710 5710 0.122
77 11 15E CC MO ND 5720 5720 0.104
77 12 15E CC MO ND 5530 5690 0.215
77 13 15E CC MO 5745 5825 0.254
77 14 15E CC MO 5755 5795 0.257
77 15 15E CC MO 5775 5775 0.212
77 16 15E CC EP MO 5845 5885 0.296
77 17 15E CC EP MO 5835 5875 0.64
77 18 15E CC EP MO 5855 5855 0.676
77 19 15E CC EP MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
78 1 15C CC 2402 2480 0.009
78 2 15C CC MO 2412 2472 0.979
78 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
79 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
80 1 15E CC MO 5955 7115 0.003
80 2 15E CC MO 5965 7085 0.007
80 3 15E CC MO 5985 7025 0.012
80 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
81 1 15C CC 2402 2480 0.009
81 2 15C CC MO 2412 2472 0.979
81 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
82 1 15E CC MO 5180 5240 0.152
82 2 15E CC MO 5190 5230 0.182
82 3 15E CC MO 5210 5210 0.093
82 4 15E CC MO 5250 5250 0.064
82 5 15E CC MO ND 5260 5320 0.152
82 6 15E CC MO ND 5270 5310 0.194
82 7 15E CC MO ND 5290 5290 0.088
82 8 15E CC MO ND 5500 5700 0.154
82 9 15E CC MO ND 5510 5670 0.249
82 1 15E CC MO ND 5710 5710 0.122
82 11 15E CC MO ND 5720 5720 0.104
82 12 15E CC MO ND 5530 5690 0.215
82 13 15E CC MO 5745 5825 0.254
82 14 15E CC MO 5755 5795 0.257
82 15 15E CC MO 5775 5775 0.212
82 16 15E CC EP MO 5845 5885 0.296
82 17 15E CC EP MO 5835 5875 0.64
82 18 15E CC EP MO 5855 5855 0.676
82 19 15E CC EP MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
83 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
84 1 15E CC MO 5955 7115 0.003
84 2 15E CC MO 5965 7085 0.007
84 3 15E CC MO 5985 7025 0.012
84 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
85 1 15E CC MO 5180 5240 0.152
85 2 15E CC MO 5190 5230 0.182
85 3 15E CC MO 5210 5210 0.093
85 4 15E CC MO 5250 5250 0.064
85 5 15E CC MO ND 5260 5320 0.152
85 6 15E CC MO ND 5270 5310 0.194
85 7 15E CC MO ND 5290 5290 0.088
85 8 15E CC MO ND 5500 5700 0.154
85 9 15E CC MO ND 5510 5670 0.249
85 1 15E CC MO ND 5710 5710 0.122
85 11 15E CC MO ND 5720 5720 0.104
85 12 15E CC MO ND 5530 5690 0.215
85 13 15E CC MO 5745 5825 0.254
85 14 15E CC MO 5755 5795 0.257
85 15 15E CC MO 5775 5775 0.212
85 16 15E CC MO 5845 5885 0.296
85 17 15E CC MO 5835 5875 0.64
85 18 15E CC MO 5855 5855 0.676
85 19 15E CC MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
86 1 15C CC 2402 2480 0.009
86 2 15C CC MO 2412 2472 0.979
86 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
87 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
88 1 15E CC MO 5180 5240 0.152
88 2 15E CC MO 5190 5230 0.182
88 3 15E CC MO 5210 5210 0.093
88 4 15E CC MO 5250 5250 0.064
88 5 15E CC MO ND 5260 5320 0.152
88 6 15E CC MO ND 5270 5310 0.194
88 7 15E CC MO ND 5290 5290 0.088
88 8 15E CC MO ND 5500 5700 0.154
88 9 15E CC MO ND 5510 5670 0.249
88 1 15E CC MO ND 5710 5710 0.122
88 11 15E CC MO ND 5720 5720 0.104
88 12 15E CC MO ND 5530 5690 0.215
88 13 15E CC MO 5745 5825 0.254
88 14 15E CC MO 5755 5795 0.257
88 15 15E CC MO 5775 5775 0.212
88 16 15E CC EP MO 5845 5885 0.296
88 17 15E CC EP MO 5835 5875 0.64
88 18 15E CC EP MO 5855 5855 0.676
88 19 15E CC EP MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
89 1 15E CC MO 5955 7115 0.003
89 2 15E CC MO 5965 7085 0.007
89 3 15E CC MO 5985 7025 0.012
89 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
90 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
91 1 15C CC 2402 2480 0.009
91 2 15C CC MO 2412 2472 0.979
91 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
92 1 15E CC MO 5180 5240 0.152
92 2 15E CC MO 5190 5230 0.182
92 3 15E CC MO 5210 5210 0.093
92 4 15E CC MO 5250 5250 0.064
92 5 15E CC MO ND 5260 5320 0.152
92 6 15E CC MO ND 5270 5310 0.194
92 7 15E CC MO ND 5290 5290 0.088
92 8 15E CC MO ND 5500 5700 0.154
92 9 15E CC MO ND 5510 5670 0.249
92 1 15E CC MO ND 5710 5710 0.122
92 11 15E CC MO ND 5720 5720 0.104
92 12 15E CC MO ND 5530 5690 0.215
92 13 15E CC MO 5745 5825 0.254
92 14 15E CC MO 5755 5795 0.257
92 15 15E CC MO 5775 5775 0.212
92 16 15E CC MO 5845 5885 0.296
92 17 15E CC MO 5835 5875 0.64
92 18 15E CC MO 5855 5855 0.676
92 19 15E CC MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
93 1 15E CC EP MO 5955 7115 0.003
93 2 15E CC EP MO 5965 7085 0.007
93 3 15E CC EP MO 5985 7025 0.012
93 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
94 1 15E CC MO 5180 5240 0.152
94 2 15E CC MO 5190 5230 0.182
94 3 15E CC MO 5210 5210 0.093
94 4 15E CC MO 5250 5250 0.064
94 5 15E CC MO ND 5260 5320 0.152
94 6 15E CC MO ND 5270 5310 0.194
94 7 15E CC MO ND 5290 5290 0.088
94 8 15E CC MO ND 5500 5700 0.154
94 9 15E CC MO ND 5510 5670 0.249
94 1 15E CC MO ND 5710 5710 0.122
94 11 15E CC MO ND 5720 5720 0.104
94 12 15E CC MO ND 5530 5690 0.215
94 13 15E CC MO 5745 5825 0.254
94 14 15E CC MO 5755 5795 0.257
94 15 15E CC MO 5775 5775 0.212
94 16 15E CC MO 5845 5885 0.296
94 17 15E CC MO 5835 5875 0.64
94 18 15E CC MO 5855 5855 0.676
94 19 15E CC MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
95 1 15E CC MO 5180 5240 0.152
95 2 15E CC MO 5190 5230 0.182
95 3 15E CC MO 5210 5210 0.093
95 4 15E CC MO 5250 5250 0.064
95 5 15E CC MO ND 5260 5320 0.152
95 6 15E CC MO ND 5270 5310 0.194
95 7 15E CC MO ND 5290 5290 0.088
95 8 15E CC MO ND 5500 5700 0.154
95 9 15E CC MO ND 5510 5670 0.249
95 1 15E CC MO ND 5710 5710 0.122
95 11 15E CC MO ND 5720 5720 0.104
95 12 15E CC MO ND 5530 5690 0.215
95 13 15E CC MO 5745 5825 0.254
95 14 15E CC MO 5755 5795 0.257
95 15 15E CC MO 5775 5775 0.212
95 16 15E CC EP MO 5845 5885 0.296
95 17 15E CC EP MO 5835 5875 0.64
95 18 15E CC EP MO 5855 5855 0.676
95 19 15E CC EP MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
96 1 15E CC MO 5180 5240 0.152
96 2 15E CC MO 5190 5230 0.182
96 3 15E CC MO 5210 5210 0.093
96 4 15E CC MO 5250 5250 0.064
96 5 15E CC MO ND 5260 5320 0.152
96 6 15E CC MO ND 5270 5310 0.194
96 7 15E CC MO ND 5290 5290 0.088
96 8 15E CC MO ND 5500 5700 0.154
96 9 15E CC MO ND 5510 5670 0.249
96 1 15E CC MO ND 5710 5710 0.122
96 11 15E CC MO ND 5720 5720 0.104
96 12 15E CC MO ND 5530 5690 0.215
96 13 15E CC MO 5745 5825 0.254
96 14 15E CC MO 5755 5795 0.257
96 15 15E CC MO 5775 5775 0.212
96 16 15E CC EP MO 5845 5885 0.296
96 17 15E CC EP MO 5835 5875 0.64
96 18 15E CC EP MO 5855 5855 0.676
96 19 15E CC EP MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
97 1 15E CC MO 5180 5240 0.152
97 2 15E CC MO 5190 5230 0.182
97 3 15E CC MO 5210 5210 0.093
97 4 15E CC MO 5250 5250 0.064
97 5 15E CC MO ND 5260 5320 0.152
97 6 15E CC MO ND 5270 5310 0.194
97 7 15E CC MO ND 5290 5290 0.088
97 8 15E CC MO ND 5500 5700 0.154
97 9 15E CC MO ND 5510 5670 0.249
97 1 15E CC MO ND 5710 5710 0.122
97 11 15E CC MO ND 5720 5720 0.104
97 12 15E CC MO ND 5530 5690 0.215
97 13 15E CC MO 5745 5825 0.254
97 14 15E CC MO 5755 5795 0.257
97 15 15E CC MO 5775 5775 0.212
97 16 15E CC MO 5845 5885 0.296
97 17 15E CC MO 5835 5875 0.64
97 18 15E CC MO 5855 5855 0.676
97 19 15E CC MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
98 1 15E CC MO 5180 5240 0.152
98 2 15E CC MO 5190 5230 0.182
98 3 15E CC MO 5210 5210 0.093
98 4 15E CC MO 5250 5250 0.064
98 5 15E CC MO ND 5260 5320 0.152
98 6 15E CC MO ND 5270 5310 0.194
98 7 15E CC MO ND 5290 5290 0.088
98 8 15E CC MO ND 5500 5700 0.154
98 9 15E CC MO ND 5510 5670 0.249
98 1 15E CC MO ND 5710 5710 0.122
98 11 15E CC MO ND 5720 5720 0.104
98 12 15E CC MO ND 5530 5690 0.215
98 13 15E CC MO 5745 5825 0.254
98 14 15E CC MO 5755 5795 0.257
98 15 15E CC MO 5775 5775 0.212
98 16 15E CC MO 5845 5885 0.296
98 17 15E CC MO 5835 5875 0.64
98 18 15E CC MO 5855 5855 0.676
98 19 15E CC MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
99 1 15E CC MO 5180 5240 0.152
99 2 15E CC MO 5190 5230 0.182
99 3 15E CC MO 5210 5210 0.093
99 4 15E CC MO 5250 5250 0.064
99 5 15E CC MO ND 5260 5320 0.152
99 6 15E CC MO ND 5270 5310 0.194
99 7 15E CC MO ND 5290 5290 0.088
99 8 15E CC MO ND 5500 5700 0.154
99 9 15E CC MO ND 5510 5670 0.249
99 1 15E CC MO ND 5710 5710 0.122
99 11 15E CC MO ND 5720 5720 0.104
99 12 15E CC MO ND 5530 5690 0.215
99 13 15E CC MO 5745 5825 0.254
99 14 15E CC MO 5755 5795 0.257
99 15 15E CC MO 5775 5775 0.212
99 16 15E CC EP MO 5845 5885 0.296
99 17 15E CC EP MO 5835 5875 0.64
99 18 15E CC EP MO 5855 5855 0.676
99 19 15E CC EP MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
100 1 15E CC MO 5180 5240 0.152
100 2 15E CC MO 5190 5230 0.182
100 3 15E CC MO 5210 5210 0.093
100 4 15E CC MO 5250 5250 0.064
100 5 15E CC MO ND 5260 5320 0.152
100 6 15E CC MO ND 5270 5310 0.194
100 7 15E CC MO ND 5290 5290 0.088
100 8 15E CC MO ND 5500 5700 0.154
100 9 15E CC MO ND 5510 5670 0.249
100 1 15E CC MO ND 5710 5710 0.122
100 11 15E CC MO ND 5720 5720 0.104
100 12 15E CC MO ND 5530 5690 0.215
100 13 15E CC MO 5745 5825 0.254
100 14 15E CC MO 5755 5795 0.257
100 15 15E CC MO 5775 5775 0.212
100 16 15E CC EP MO 5845 5885 0.296
100 17 15E CC EP MO 5835 5875 0.64
100 18 15E CC EP MO 5855 5855 0.676
100 19 15E CC EP MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
101 1 15E CC MO 5180 5240 0.152
101 2 15E CC MO 5190 5230 0.182
101 3 15E CC MO 5210 5210 0.093
101 4 15E CC MO 5250 5250 0.064
101 5 15E CC MO ND 5260 5320 0.152
101 6 15E CC MO ND 5270 5310 0.194
101 7 15E CC MO ND 5290 5290 0.088
101 8 15E CC MO ND 5500 5700 0.154
101 9 15E CC MO ND 5510 5670 0.249
101 1 15E CC MO ND 5710 5710 0.122
101 11 15E CC MO ND 5720 5720 0.104
101 12 15E CC MO ND 5530 5690 0.215
101 13 15E CC MO 5745 5825 0.254
101 14 15E CC MO 5755 5795 0.257
101 15 15E CC MO 5775 5775 0.212
101 16 15E CC EP MO 5845 5885 0.296
101 17 15E CC EP MO 5835 5875 0.64
101 18 15E CC EP MO 5855 5855 0.676
101 19 15E CC EP MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
102 1 15E CC MO 5955 7115 0.003
102 2 15E CC MO 5965 7085 0.007
102 3 15E CC MO 5985 7025 0.012
102 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
103 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
104 1 15E CC MO 5180 5240 0.152
104 2 15E CC MO 5190 5230 0.182
104 3 15E CC MO 5210 5210 0.093
104 4 15E CC MO 5250 5250 0.064
104 5 15E CC MO ND 5260 5320 0.152
104 6 15E CC MO ND 5270 5310 0.194
104 7 15E CC MO ND 5290 5290 0.088
104 8 15E CC MO ND 5500 5700 0.154
104 9 15E CC MO ND 5510 5670 0.249
104 1 15E CC MO ND 5710 5710 0.122
104 11 15E CC MO ND 5720 5720 0.104
104 12 15E CC MO ND 5530 5690 0.215
104 13 15E CC MO 5745 5825 0.254
104 14 15E CC MO 5755 5795 0.257
104 15 15E CC MO 5775 5775 0.212
104 16 15E CC MO 5845 5885 0.296
104 17 15E CC MO 5835 5875 0.64
104 18 15E CC MO 5855 5855 0.676
104 19 15E CC MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
105 1 15C CC 2402 2480 0.009
105 2 15C CC MO 2412 2472 0.979
105 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
106 1 15C CC 2402 2480 0.009
106 2 15C CC MO 2412 2472 0.979
106 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
107 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
108 1 15E CC MO 5955 7115 0.003
108 2 15E CC MO 5965 7085 0.007
108 3 15E CC MO 5985 7025 0.012
108 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
109 1 15E CC MO 5180 5240 0.152
109 2 15E CC MO 5190 5230 0.182
109 3 15E CC MO 5210 5210 0.093
109 4 15E CC MO 5250 5250 0.064
109 5 15E CC MO ND 5260 5320 0.152
109 6 15E CC MO ND 5270 5310 0.194
109 7 15E CC MO ND 5290 5290 0.088
109 8 15E CC MO ND 5500 5700 0.154
109 9 15E CC MO ND 5510 5670 0.249
109 1 15E CC MO ND 5710 5710 0.122
109 11 15E CC MO ND 5720 5720 0.104
109 12 15E CC MO ND 5530 5690 0.215
109 13 15E CC MO 5745 5825 0.254
109 14 15E CC MO 5755 5795 0.257
109 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
110 1 15E CC MO 5180 5240 0.152
110 2 15E CC MO 5190 5230 0.182
110 3 15E CC MO 5210 5210 0.093
110 4 15E CC MO 5250 5250 0.064
110 5 15E CC MO ND 5260 5320 0.152
110 6 15E CC MO ND 5270 5310 0.194
110 7 15E CC MO ND 5290 5290 0.088
110 8 15E CC MO ND 5500 5700 0.154
110 9 15E CC MO ND 5510 5670 0.249
110 1 15E CC MO ND 5710 5710 0.122
110 11 15E CC MO ND 5720 5720 0.104
110 12 15E CC MO ND 5530 5690 0.215
110 13 15E CC MO 5745 5825 0.254
110 14 15E CC MO 5755 5795 0.257
110 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
111 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
112 1 15C CC 2402 2480 0.009
112 2 15C CC MO 2412 2472 0.979
112 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
113 1 15E CC MO 5955 7115 0.003
113 2 15E CC MO 5965 7085 0.007
113 3 15E CC MO 5985 7025 0.012
113 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
114 1 15E CC MO 5955 7115 0.003
114 2 15E CC MO 5965 7085 0.007
114 3 15E CC MO 5985 7025 0.012
114 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
115 1 15C CC 2402 2480 0.009
115 2 15C CC MO 2412 2472 0.979
115 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
116 1 15E CC MO 5180 5240 0.152
116 2 15E CC MO 5190 5230 0.182
116 3 15E CC MO 5210 5210 0.093
116 4 15E CC MO 5250 5250 0.064
116 5 15E CC MO ND 5260 5320 0.152
116 6 15E CC MO ND 5270 5310 0.194
116 7 15E CC MO ND 5290 5290 0.088
116 8 15E CC MO ND 5500 5700 0.154
116 9 15E CC MO ND 5510 5670 0.249
116 1 15E CC MO ND 5710 5710 0.122
116 11 15E CC MO ND 5720 5720 0.104
116 12 15E CC MO ND 5530 5690 0.215
116 13 15E CC MO 5745 5825 0.254
116 14 15E CC MO 5755 5795 0.257
116 15 15E CC MO 5775 5775 0.212
116 16 15E CC MO 5845 5885 0.296
116 17 15E CC MO 5835 5875 0.64
116 18 15E CC MO 5855 5855 0.676
116 19 15E CC MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
117 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
118 1 15E CC MO 5955 7115 0.003
118 2 15E CC MO 5965 7085 0.007
118 3 15E CC MO 5985 7025 0.012
118 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
119 1 15E CC MO 5180 5240 0.152
119 2 15E CC MO 5190 5230 0.182
119 3 15E CC MO 5210 5210 0.093
119 4 15E CC MO 5250 5250 0.064
119 5 15E CC MO ND 5260 5320 0.152
119 6 15E CC MO ND 5270 5310 0.194
119 7 15E CC MO ND 5290 5290 0.088
119 8 15E CC MO ND 5500 5700 0.154
119 9 15E CC MO ND 5510 5670 0.249
119 1 15E CC MO ND 5710 5710 0.122
119 11 15E CC MO ND 5720 5720 0.104
119 12 15E CC MO ND 5530 5690 0.215
119 13 15E CC MO 5745 5825 0.254
119 14 15E CC MO 5755 5795 0.257
119 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
120 1 15C CC 2402 2480 0.009
120 2 15C CC MO 2412 2472 0.979
120 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
121 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
122 1 15E CC MO 5180 5240 0.152
122 2 15E CC MO 5190 5230 0.182
122 3 15E CC MO 5210 5210 0.093
122 4 15E CC MO 5250 5250 0.064
122 5 15E CC MO ND 5260 5320 0.152
122 6 15E CC MO ND 5270 5310 0.194
122 7 15E CC MO ND 5290 5290 0.088
122 8 15E CC MO ND 5500 5700 0.154
122 9 15E CC MO ND 5510 5670 0.249
122 1 15E CC MO ND 5710 5710 0.122
122 11 15E CC MO ND 5720 5720 0.104
122 12 15E CC MO ND 5530 5690 0.215
122 13 15E CC MO 5745 5825 0.254
122 14 15E CC MO 5755 5795 0.257
122 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
123 1 15E CC MO 5955 7115 0.003
123 2 15E CC MO 5965 7085 0.007
123 3 15E CC MO 5985 7025 0.012
123 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
124 1 15C CC 2402 2480 0.009
124 2 15C CC MO 2412 2472 0.979
124 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
125 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
126 1 15C CC 2402 2480 0.009
126 2 15C CC MO 2412 2472 0.979
126 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
127 1 15E CC MO 5955 7115 0.003
127 2 15E CC MO 5965 7085 0.007
127 3 15E CC MO 5985 7025 0.012
127 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
128 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
129 1 15E CC MO 5180 5240 0.152
129 2 15E CC MO 5190 5230 0.182
129 3 15E CC MO 5210 5210 0.093
129 4 15E CC MO 5250 5250 0.064
129 5 15E CC MO ND 5260 5320 0.152
129 6 15E CC MO ND 5270 5310 0.194
129 7 15E CC MO ND 5290 5290 0.088
129 8 15E CC MO ND 5500 5700 0.154
129 9 15E CC MO ND 5510 5670 0.249
129 1 15E CC MO ND 5710 5710 0.122
129 11 15E CC MO ND 5720 5720 0.104
129 12 15E CC MO ND 5530 5690 0.215
129 13 15E CC MO 5745 5825 0.254
129 14 15E CC MO 5755 5795 0.257
129 15 15E CC MO 5775 5775 0.212
129 16 15E CC MO 5845 5885 0.296
129 17 15E CC MO 5835 5875 0.64
129 18 15E CC MO 5855 5855 0.676
129 19 15E CC MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
130 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
131 1 15E CC MO 5180 5240 0.152
131 2 15E CC MO 5190 5230 0.182
131 3 15E CC MO 5210 5210 0.093
131 4 15E CC MO 5250 5250 0.064
131 5 15E CC MO ND 5260 5320 0.152
131 6 15E CC MO ND 5270 5310 0.194
131 7 15E CC MO ND 5290 5290 0.088
131 8 15E CC MO ND 5500 5700 0.154
131 9 15E CC MO ND 5510 5670 0.249
131 1 15E CC MO ND 5710 5710 0.122
131 11 15E CC MO ND 5720 5720 0.104
131 12 15E CC MO ND 5530 5690 0.215
131 13 15E CC MO 5745 5825 0.254
131 14 15E CC MO 5755 5795 0.257
131 15 15E CC MO 5775 5775 0.212
131 16 15E CC MO 5845 5885 0.296
131 17 15E CC MO 5835 5875 0.64
131 18 15E CC MO 5855 5855 0.676
131 19 15E CC MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
132 1 15C CC 2402 2480 0.009
132 2 15C CC MO 2412 2472 0.979
132 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
133 1 15E CC MO 5955 7115 0.003
133 2 15E CC MO 5965 7085 0.007
133 3 15E CC MO 5985 7025 0.012
133 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
134 1 15E CC MO 5180 5240 0.152
134 2 15E CC MO 5190 5230 0.182
134 3 15E CC MO 5210 5210 0.093
134 4 15E CC MO 5250 5250 0.064
134 5 15E CC MO ND 5260 5320 0.152
134 6 15E CC MO ND 5270 5310 0.194
134 7 15E CC MO ND 5290 5290 0.088
134 8 15E CC MO ND 5500 5700 0.154
134 9 15E CC MO ND 5510 5670 0.249
134 1 15E CC MO ND 5710 5710 0.122
134 11 15E CC MO ND 5720 5720 0.104
134 12 15E CC MO ND 5530 5690 0.215
134 13 15E CC MO 5745 5825 0.254
134 14 15E CC MO 5755 5795 0.257
134 15 15E CC MO 5775 5775 0.212
134 16 15E CC MO 5845 5885 0.296
134 17 15E CC MO 5835 5875 0.64
134 18 15E CC MO 5855 5855 0.676
134 19 15E CC MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
135 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
136 1 15C CC 2402 2480 0.009
136 2 15C CC MO 2412 2472 0.979
136 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
137 1 15E CC MO 5955 7115 0.003
137 2 15E CC MO 5965 7085 0.007
137 3 15E CC MO 5985 7025 0.012
137 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
138 1 15E CC MO 5955 7115 0.003
138 2 15E CC MO 5965 7085 0.007
138 3 15E CC MO 5985 7025 0.012
138 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
139 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
140 1 15C CC 2402 2480 0.009
140 2 15C CC MO 2412 2472 0.979
140 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
141 1 15E CC MO 5180 5240 0.152
141 2 15E CC MO 5190 5230 0.182
141 3 15E CC MO 5210 5210 0.093
141 4 15E CC MO 5250 5250 0.064
141 5 15E CC MO ND 5260 5320 0.152
141 6 15E CC MO ND 5270 5310 0.194
141 7 15E CC MO ND 5290 5290 0.088
141 8 15E CC MO ND 5500 5700 0.154
141 9 15E CC MO ND 5510 5670 0.249
141 1 15E CC MO ND 5710 5710 0.122
141 11 15E CC MO ND 5720 5720 0.104
141 12 15E CC MO ND 5530 5690 0.215
141 13 15E CC MO 5745 5825 0.254
141 14 15E CC MO 5755 5795 0.257
141 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
142 1 15E CC MO 5180 5240 0.152
142 2 15E CC MO 5190 5230 0.182
142 3 15E CC MO 5210 5210 0.093
142 4 15E CC MO 5250 5250 0.064
142 5 15E CC MO ND 5260 5320 0.152
142 6 15E CC MO ND 5270 5310 0.194
142 7 15E CC MO ND 5290 5290 0.088
142 8 15E CC MO ND 5500 5700 0.154
142 9 15E CC MO ND 5510 5670 0.249
142 1 15E CC MO ND 5710 5710 0.122
142 11 15E CC MO ND 5720 5720 0.104
142 12 15E CC MO ND 5530 5690 0.215
142 13 15E CC MO 5745 5825 0.254
142 14 15E CC MO 5755 5795 0.257
142 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
143 1 15C CC 2402 2480 0.009
143 2 15C CC MO 2412 2472 0.979
143 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
144 1 15E CC MO 5955 7115 0.003
144 2 15E CC MO 5965 7085 0.007
144 3 15E CC MO 5985 7025 0.012
144 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
145 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
146 1 15E CC MO 5955 7115 0.003
146 2 15E CC MO 5965 7085 0.007
146 3 15E CC MO 5985 7025 0.012
146 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
147 1 15E CC MO 5180 5240 0.152
147 2 15E CC MO 5190 5230 0.182
147 3 15E CC MO 5210 5210 0.093
147 4 15E CC MO 5250 5250 0.064
147 5 15E CC MO ND 5260 5320 0.152
147 6 15E CC MO ND 5270 5310 0.194
147 7 15E CC MO ND 5290 5290 0.088
147 8 15E CC MO ND 5500 5700 0.154
147 9 15E CC MO ND 5510 5670 0.249
147 1 15E CC MO ND 5710 5710 0.122
147 11 15E CC MO ND 5720 5720 0.104
147 12 15E CC MO ND 5530 5690 0.215
147 13 15E CC MO 5745 5825 0.254
147 14 15E CC MO 5755 5795 0.257
147 15 15E CC MO 5775 5775 0.212
147 16 15E CC EP MO 5845 5885 0.296
147 17 15E CC EP MO 5835 5875 0.64
147 18 15E CC EP MO 5855 5855 0.676
147 19 15E CC EP MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
148 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
149 1 15C CC 2402 2480 0.009
149 2 15C CC MO 2412 2472 0.979
149 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
150 1 15E CC MO 5955 7115 0.003
150 2 15E CC MO 5965 7085 0.007
150 3 15E CC MO 5985 7025 0.012
150 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
151 1 15C CC 2402 2480 0.009
151 2 15C CC MO 2412 2472 0.979
151 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
152 1 15E CC MO 5180 5240 0.152
152 2 15E CC MO 5190 5230 0.182
152 3 15E CC MO 5210 5210 0.093
152 4 15E CC MO 5250 5250 0.064
152 5 15E CC MO ND 5260 5320 0.152
152 6 15E CC MO ND 5270 5310 0.194
152 7 15E CC MO ND 5290 5290 0.088
152 8 15E CC MO ND 5500 5700 0.154
152 9 15E CC MO ND 5510 5670 0.249
152 1 15E CC MO ND 5710 5710 0.122
152 11 15E CC MO ND 5720 5720 0.104
152 12 15E CC MO ND 5530 5690 0.215
152 13 15E CC MO 5745 5825 0.254
152 14 15E CC MO 5755 5795 0.257
152 15 15E CC MO 5775 5775 0.212
152 16 15E CC MO 5845 5885 0.296
152 17 15E CC MO 5835 5875 0.64
152 18 15E CC MO 5855 5855 0.676
152 19 15E CC MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
153 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
154 1 15C CC 2402 2480 0.009
154 2 15C CC MO 2412 2472 0.979
154 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
155 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
156 1 15E CC MO 5180 5240 0.152
156 2 15E CC MO 5190 5230 0.182
156 3 15E CC MO 5210 5210 0.093
156 4 15E CC MO 5250 5250 0.064
156 5 15E CC MO ND 5260 5320 0.152
156 6 15E CC MO ND 5270 5310 0.194
156 7 15E CC MO ND 5290 5290 0.088
156 8 15E CC MO ND 5500 5700 0.154
156 9 15E CC MO ND 5510 5670 0.249
156 1 15E CC MO ND 5710 5710 0.122
156 11 15E CC MO ND 5720 5720 0.104
156 12 15E CC MO ND 5530 5690 0.215
156 13 15E CC MO 5745 5825 0.254
156 14 15E CC MO 5755 5795 0.257
156 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
157 1 15E CC MO 5955 7115 0.003
157 2 15E CC MO 5965 7085 0.007
157 3 15E CC MO 5985 7025 0.012
157 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
158 1 15E CC MO 5955 7115 0.003
158 2 15E CC MO 5965 7085 0.007
158 3 15E CC MO 5985 7025 0.012
158 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
159 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
160 1 15E CC MO 5180 5240 0.152
160 2 15E CC MO 5190 5230 0.182
160 3 15E CC MO 5210 5210 0.093
160 4 15E CC MO 5250 5250 0.064
160 5 15E CC MO ND 5260 5320 0.152
160 6 15E CC MO ND 5270 5310 0.194
160 7 15E CC MO ND 5290 5290 0.088
160 8 15E CC MO ND 5500 5700 0.154
160 9 15E CC MO ND 5510 5670 0.249
160 1 15E CC MO ND 5710 5710 0.122
160 11 15E CC MO ND 5720 5720 0.104
160 12 15E CC MO ND 5530 5690 0.215
160 13 15E CC MO 5745 5825 0.254
160 14 15E CC MO 5755 5795 0.257
160 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
161 1 15C CC 2402 2480 0.009
161 2 15C CC MO 2412 2472 0.979
161 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
162 1 15C CC 2402 2480 0.009
162 2 15C CC MO 2412 2472 0.979
162 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
163 1 15E CC MO 5955 7115 0.003
163 2 15E CC MO 5965 7085 0.007
163 3 15E CC MO 5985 7025 0.012
163 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
164 1 15E CC MO 5180 5240 0.152
164 2 15E CC MO 5190 5230 0.182
164 3 15E CC MO 5210 5210 0.093
164 4 15E CC MO 5250 5250 0.064
164 5 15E CC MO ND 5260 5320 0.152
164 6 15E CC MO ND 5270 5310 0.194
164 7 15E CC MO ND 5290 5290 0.088
164 8 15E CC MO ND 5500 5700 0.154
164 9 15E CC MO ND 5510 5670 0.249
164 1 15E CC MO ND 5710 5710 0.122
164 11 15E CC MO ND 5720 5720 0.104
164 12 15E CC MO ND 5530 5690 0.215
164 13 15E CC MO 5745 5825 0.254
164 14 15E CC MO 5755 5795 0.257
164 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
165 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
166 1 15E CC MO 5180 5240 0.152
166 2 15E CC MO 5190 5230 0.182
166 3 15E CC MO 5210 5210 0.093
166 4 15E CC MO 5250 5250 0.064
166 5 15E CC MO ND 5260 5320 0.152
166 6 15E CC MO ND 5270 5310 0.194
166 7 15E CC MO ND 5290 5290 0.088
166 8 15E CC MO ND 5500 5700 0.154
166 9 15E CC MO ND 5510 5670 0.249
166 1 15E CC MO ND 5710 5710 0.122
166 11 15E CC MO ND 5720 5720 0.104
166 12 15E CC MO ND 5530 5690 0.215
166 13 15E CC MO 5745 5825 0.254
166 14 15E CC MO 5755 5795 0.257
166 15 15E CC MO 5775 5775 0.212
166 16 15E CC MO 5845 5885 0.296
166 17 15E CC MO 5835 5875 0.64
166 18 15E CC MO 5855 5855 0.676
166 19 15E CC MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
167 1 15C CC 2402 2480 0.009
167 2 15C CC MO 2412 2472 0.979
167 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
168 1 15E CC MO 5955 7115 0.003
168 2 15E CC MO 5965 7085 0.007
168 3 15E CC MO 5985 7025 0.012
168 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
169 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
170 1 15E CC MO 5955 7115 0.003
170 2 15E CC MO 5965 7085 0.007
170 3 15E CC MO 5985 7025 0.012
170 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
171 1 15E CC MO 5180 5240 0.152
171 2 15E CC MO 5190 5230 0.182
171 3 15E CC MO 5210 5210 0.093
171 4 15E CC MO 5250 5250 0.064
171 5 15E CC MO ND 5260 5320 0.152
171 6 15E CC MO ND 5270 5310 0.194
171 7 15E CC MO ND 5290 5290 0.088
171 8 15E CC MO ND 5500 5700 0.154
171 9 15E CC MO ND 5510 5670 0.249
171 1 15E CC MO ND 5710 5710 0.122
171 11 15E CC MO ND 5720 5720 0.104
171 12 15E CC MO ND 5530 5690 0.215
171 13 15E CC MO 5745 5825 0.254
171 14 15E CC MO 5755 5795 0.257
171 15 15E CC MO 5775 5775 0.212
171 16 15E CC MO 5845 5885 0.296
171 17 15E CC MO 5835 5875 0.64
171 18 15E CC MO 5855 5855 0.676
171 19 15E CC MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
172 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
173 1 15C CC 2402 2480 0.009
173 2 15C CC MO 2412 2472 0.979
173 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
174 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
175 1 15C CC 2402 2480 0.009
175 2 15C CC MO 2412 2472 0.979
175 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
176 1 15E CC MO 5180 5240 0.152
176 2 15E CC MO 5190 5230 0.182
176 3 15E CC MO 5210 5210 0.093
176 4 15E CC MO 5250 5250 0.064
176 5 15E CC MO ND 5260 5320 0.152
176 6 15E CC MO ND 5270 5310 0.194
176 7 15E CC MO ND 5290 5290 0.088
176 8 15E CC MO ND 5500 5700 0.154
176 9 15E CC MO ND 5510 5670 0.249
176 1 15E CC MO ND 5710 5710 0.122
176 11 15E CC MO ND 5720 5720 0.104
176 12 15E CC MO ND 5530 5690 0.215
176 13 15E CC MO 5745 5825 0.254
176 14 15E CC MO 5755 5795 0.257
176 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
177 1 15E CC MO 5955 7115 0.003
177 2 15E CC MO 5965 7085 0.007
177 3 15E CC MO 5985 7025 0.012
177 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
178 1 15E CC MO 5955 7115 0.003
178 2 15E CC MO 5965 7085 0.007
178 3 15E CC MO 5985 7025 0.012
178 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
179 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
180 1 15C CC 2402 2480 0.009
180 2 15C CC MO 2412 2472 0.979
180 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
181 1 15E CC MO 5180 5240 0.152
181 2 15E CC MO 5190 5230 0.182
181 3 15E CC MO 5210 5210 0.093
181 4 15E CC MO 5250 5250 0.064
181 5 15E CC MO ND 5260 5320 0.152
181 6 15E CC MO ND 5270 5310 0.194
181 7 15E CC MO ND 5290 5290 0.088
181 8 15E CC MO ND 5500 5700 0.154
181 9 15E CC MO ND 5510 5670 0.249
181 1 15E CC MO ND 5710 5710 0.122
181 11 15E CC MO ND 5720 5720 0.104
181 12 15E CC MO ND 5530 5690 0.215
181 13 15E CC MO 5745 5825 0.254
181 14 15E CC MO 5755 5795 0.257
181 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
182 1 15E CC MO 5955 7115 0.003
182 2 15E CC MO 5965 7085 0.007
182 3 15E CC MO 5985 7025 0.012
182 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
183 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
184 1 15C CC 2402 2480 0.009
184 2 15C CC MO 2412 2472 0.979
184 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
185 1 15E CC MO 5180 5240 0.152
185 2 15E CC MO 5190 5230 0.182
185 3 15E CC MO 5210 5210 0.093
185 4 15E CC MO 5250 5250 0.064
185 5 15E CC MO ND 5260 5320 0.152
185 6 15E CC MO ND 5270 5310 0.194
185 7 15E CC MO ND 5290 5290 0.088
185 8 15E CC MO ND 5500 5700 0.154
185 9 15E CC MO ND 5510 5670 0.249
185 1 15E CC MO ND 5710 5710 0.122
185 11 15E CC MO ND 5720 5720 0.104
185 12 15E CC MO ND 5530 5690 0.215
185 13 15E CC MO 5745 5825 0.254
185 14 15E CC MO 5755 5795 0.257
185 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
186 1 15E CC MO 5955 7115 0.003
186 2 15E CC MO 5965 7085 0.007
186 3 15E CC MO 5985 7025 0.012
186 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
187 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
188 1 15E CC MO 5180 5240 0.152
188 2 15E CC MO 5190 5230 0.182
188 3 15E CC MO 5210 5210 0.093
188 4 15E CC MO 5250 5250 0.064
188 5 15E CC MO ND 5260 5320 0.152
188 6 15E CC MO ND 5270 5310 0.194
188 7 15E CC MO ND 5290 5290 0.088
188 8 15E CC MO ND 5500 5700 0.154
188 9 15E CC MO ND 5510 5670 0.249
188 1 15E CC MO ND 5710 5710 0.122
188 11 15E CC MO ND 5720 5720 0.104
188 12 15E CC MO ND 5530 5690 0.215
188 13 15E CC MO 5745 5825 0.254
188 14 15E CC MO 5755 5795 0.257
188 15 15E CC MO 5775 5775 0.212
188 16 15E CC MO 5845 5885 0.296
188 17 15E CC MO 5835 5875 0.64
188 18 15E CC MO 5855 5855 0.676
188 19 15E CC MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
189 1 15C CC 2402 2480 0.009
189 2 15C CC MO 2412 2472 0.979
189 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
190 1 15E CC MO 5180 5240 0.152
190 2 15E CC MO 5190 5230 0.182
190 3 15E CC MO 5210 5210 0.093
190 4 15E CC MO 5250 5250 0.064
190 5 15E CC MO ND 5260 5320 0.152
190 6 15E CC MO ND 5270 5310 0.194
190 7 15E CC MO ND 5290 5290 0.088
190 8 15E CC MO ND 5500 5700 0.154
190 9 15E CC MO ND 5510 5670 0.249
190 1 15E CC MO ND 5710 5710 0.122
190 11 15E CC MO ND 5720 5720 0.104
190 12 15E CC MO ND 5530 5690 0.215
190 13 15E CC MO 5745 5825 0.254
190 14 15E CC MO 5755 5795 0.257
190 15 15E CC MO 5775 5775 0.212
190 16 15E CC MO 5845 5885 0.296
190 17 15E CC MO 5835 5875 0.64
190 18 15E CC MO 5855 5855 0.676
190 19 15E CC MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
191 1 15E CC MO 5955 7115 0.003
191 2 15E CC MO 5965 7085 0.007
191 3 15E CC MO 5985 7025 0.012
191 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
192 1 15C CC 2402 2480 0.009
192 2 15C CC MO 2412 2472 0.979
192 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
193 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
194 1 15E CC MO 5180 5240 0.152
194 2 15E CC MO 5190 5230 0.182
194 3 15E CC MO 5210 5210 0.093
194 4 15E CC MO 5250 5250 0.064
194 5 15E CC MO ND 5260 5320 0.152
194 6 15E CC MO ND 5270 5310 0.194
194 7 15E CC MO ND 5290 5290 0.088
194 8 15E CC MO ND 5500 5700 0.154
194 9 15E CC MO ND 5510 5670 0.249
194 1 15E CC MO ND 5710 5710 0.122
194 11 15E CC MO ND 5720 5720 0.104
194 12 15E CC MO ND 5530 5690 0.215
194 13 15E CC MO 5745 5825 0.254
194 14 15E CC MO 5755 5795 0.257
194 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
195 1 15E CC MO 5955 7115 0.003
195 2 15E CC MO 5965 7085 0.007
195 3 15E CC MO 5985 7025 0.012
195 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
196 1 15C CC 2402 2480 0.009
196 2 15C CC MO 2412 2472 0.979
196 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
197 1 15E CC MO 5180 5240 0.152
197 2 15E CC MO 5190 5230 0.182
197 3 15E CC MO 5210 5210 0.093
197 4 15E CC MO 5250 5250 0.064
197 5 15E CC MO ND 5260 5320 0.152
197 6 15E CC MO ND 5270 5310 0.194
197 7 15E CC MO ND 5290 5290 0.088
197 8 15E CC MO ND 5500 5700 0.154
197 9 15E CC MO ND 5510 5670 0.249
197 1 15E CC MO ND 5710 5710 0.122
197 11 15E CC MO ND 5720 5720 0.104
197 12 15E CC MO ND 5530 5690 0.215
197 13 15E CC MO 5745 5825 0.254
197 14 15E CC MO 5755 5795 0.257
197 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
198 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
199 1 15E CC MO 5180 5240 0.152
199 2 15E CC MO 5190 5230 0.182
199 3 15E CC MO 5210 5210 0.093
199 4 15E CC MO 5250 5250 0.064
199 5 15E CC MO ND 5260 5320 0.152
199 6 15E CC MO ND 5270 5310 0.194
199 7 15E CC MO ND 5290 5290 0.088
199 8 15E CC MO ND 5500 5700 0.154
199 9 15E CC MO ND 5510 5670 0.249
199 1 15E CC MO ND 5710 5710 0.122
199 11 15E CC MO ND 5720 5720 0.104
199 12 15E CC MO ND 5530 5690 0.215
199 13 15E CC MO 5745 5825 0.254
199 14 15E CC MO 5755 5795 0.257
199 15 15E CC MO 5775 5775 0.212
199 16 15E CC MO 5845 5885 0.296
199 17 15E CC MO 5835 5875 0.64
199 18 15E CC MO 5855 5855 0.676
199 19 15E CC MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
200 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
201 1 15E CC MO 5180 5240 0.152
201 2 15E CC MO 5190 5230 0.182
201 3 15E CC MO 5210 5210 0.093
201 4 15E CC MO 5250 5250 0.064
201 5 15E CC MO ND 5260 5320 0.152
201 6 15E CC MO ND 5270 5310 0.194
201 7 15E CC MO ND 5290 5290 0.088
201 8 15E CC MO ND 5500 5700 0.154
201 9 15E CC MO ND 5510 5670 0.249
201 1 15E CC MO ND 5710 5710 0.122
201 11 15E CC MO ND 5720 5720 0.104
201 12 15E CC MO ND 5530 5690 0.215
201 13 15E CC MO 5745 5825 0.254
201 14 15E CC MO 5755 5795 0.257
201 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
202 1 15C CC 2402 2480 0.009
202 2 15C CC MO 2412 2472 0.979
202 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
203 1 15E CC MO 5955 7115 0.003
203 2 15E CC MO 5965 7085 0.007
203 3 15E CC MO 5985 7025 0.012
203 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
204 1 15E CC MO 5180 5240 0.152
204 2 15E CC MO 5190 5230 0.182
204 3 15E CC MO 5210 5210 0.093
204 4 15E CC MO 5250 5250 0.064
204 5 15E CC MO ND 5260 5320 0.152
204 6 15E CC MO ND 5270 5310 0.194
204 7 15E CC MO ND 5290 5290 0.088
204 8 15E CC MO ND 5500 5700 0.154
204 9 15E CC MO ND 5510 5670 0.249
204 1 15E CC MO ND 5710 5710 0.122
204 11 15E CC MO ND 5720 5720 0.104
204 12 15E CC MO ND 5530 5690 0.215
204 13 15E CC MO 5745 5825 0.254
204 14 15E CC MO 5755 5795 0.257
204 15 15E CC MO 5775 5775 0.212
204 16 15E CC MO 5845 5885 0.296
204 17 15E CC MO 5835 5875 0.64
204 18 15E CC MO 5855 5855 0.676
204 19 15E CC MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
205 1 15E CC MO 5180 5240 0.152
205 2 15E CC MO 5190 5230 0.182
205 3 15E CC MO 5210 5210 0.093
205 4 15E CC MO 5250 5250 0.064
205 5 15E CC MO ND 5260 5320 0.152
205 6 15E CC MO ND 5270 5310 0.194
205 7 15E CC MO ND 5290 5290 0.088
205 8 15E CC MO ND 5500 5700 0.154
205 9 15E CC MO ND 5510 5670 0.249
205 1 15E CC MO ND 5710 5710 0.122
205 11 15E CC MO ND 5720 5720 0.104
205 12 15E CC MO ND 5530 5690 0.215
205 13 15E CC MO 5745 5825 0.254
205 14 15E CC MO 5755 5795 0.257
205 15 15E CC MO 5775 5775 0.212
205 16 15E CC MO 5845 5885 0.296
205 17 15E CC MO 5835 5875 0.64
205 18 15E CC MO 5855 5855 0.676
205 19 15E CC MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
206 1 15E CC MO 5180 5240 0.152
206 2 15E CC MO 5190 5230 0.182
206 3 15E CC MO 5210 5210 0.093
206 4 15E CC MO 5250 5250 0.064
206 5 15E CC MO ND 5260 5320 0.152
206 6 15E CC MO ND 5270 5310 0.194
206 7 15E CC MO ND 5290 5290 0.088
206 8 15E CC MO ND 5500 5700 0.154
206 9 15E CC MO ND 5510 5670 0.249
206 1 15E CC MO ND 5710 5710 0.122
206 11 15E CC MO ND 5720 5720 0.104
206 12 15E CC MO ND 5530 5690 0.215
206 13 15E CC MO 5745 5825 0.254
206 14 15E CC MO 5755 5795 0.257
206 15 15E CC MO 5775 5775 0.212
206 16 15E CC MO 5845 5885 0.296
206 17 15E CC MO 5835 5875 0.64
206 18 15E CC MO 5855 5855 0.676
206 19 15E CC MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
207 1 15E CC MO 5955 7115 0.003
207 2 15E CC MO 5965 7085 0.007
207 3 15E CC MO 5985 7025 0.012
207 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
208 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
209 1 15C CC 2402 2480 0.009
209 2 15C CC MO 2412 2472 0.979
209 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
210 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
211 1 15E CC EP MO 5955 7115 0.003
211 2 15E CC EP MO 5965 7085 0.007
211 3 15E CC EP MO 5985 7025 0.012
211 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
212 1 15E CC MO 5180 5240 0.152
212 2 15E CC MO 5190 5230 0.182
212 3 15E CC MO 5210 5210 0.093
212 4 15E CC MO 5250 5250 0.064
212 5 15E CC MO ND 5260 5320 0.152
212 6 15E CC MO ND 5270 5310 0.194
212 7 15E CC MO ND 5290 5290 0.088
212 8 15E CC MO ND 5500 5700 0.154
212 9 15E CC MO ND 5510 5670 0.249
212 1 15E CC MO ND 5710 5710 0.122
212 11 15E CC MO ND 5720 5720 0.104
212 12 15E CC MO ND 5530 5690 0.215
212 13 15E CC MO 5745 5825 0.254
212 14 15E CC MO 5755 5795 0.257
212 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
213 1 15C CC 2402 2480 0.009
213 2 15C CC MO 2412 2472 0.979
213 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
214 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
215 1 15E CC MO 5180 5240 0.152
215 2 15E CC MO 5190 5230 0.182
215 3 15E CC MO 5210 5210 0.093
215 4 15E CC MO 5250 5250 0.064
215 5 15E CC MO ND 5260 5320 0.152
215 6 15E CC MO ND 5270 5310 0.194
215 7 15E CC MO ND 5290 5290 0.088
215 8 15E CC MO ND 5500 5700 0.154
215 9 15E CC MO ND 5510 5670 0.249
215 1 15E CC MO ND 5710 5710 0.122
215 11 15E CC MO ND 5720 5720 0.104
215 12 15E CC MO ND 5530 5690 0.215
215 13 15E CC MO 5745 5825 0.254
215 14 15E CC MO 5755 5795 0.257
215 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
216 1 15E CC EP MO 5955 7115 0.003
216 2 15E CC EP MO 5965 7085 0.007
216 3 15E CC EP MO 5985 7025 0.012
216 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
217 1 15C CC 2402 2480 0.009
217 2 15C CC MO 2412 2472 0.979
217 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
218 1 15E CC MO 5180 5240 0.152
218 2 15E CC MO 5190 5230 0.182
218 3 15E CC MO 5210 5210 0.093
218 4 15E CC MO 5250 5250 0.064
218 5 15E CC MO ND 5260 5320 0.152
218 6 15E CC MO ND 5270 5310 0.194
218 7 15E CC MO ND 5290 5290 0.088
218 8 15E CC MO ND 5500 5700 0.154
218 9 15E CC MO ND 5510 5670 0.249
218 1 15E CC MO ND 5710 5710 0.122
218 11 15E CC MO ND 5720 5720 0.104
218 12 15E CC MO ND 5530 5690 0.215
218 13 15E CC MO 5745 5825 0.254
218 14 15E CC MO 5755 5795 0.257
218 15 15E CC MO 5775 5775 0.212
218 16 15E CC EP MO 5845 5885 0.296
218 17 15E CC EP MO 5835 5875 0.64
218 18 15E CC EP MO 5855 5855 0.676
218 19 15E CC EP MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
219 1 15E CC MO 5180 5240 0.152
219 2 15E CC MO 5190 5230 0.182
219 3 15E CC MO 5210 5210 0.093
219 4 15E CC MO 5250 5250 0.064
219 5 15E CC MO ND 5260 5320 0.152
219 6 15E CC MO ND 5270 5310 0.194
219 7 15E CC MO ND 5290 5290 0.088
219 8 15E CC MO ND 5500 5700 0.154
219 9 15E CC MO ND 5510 5670 0.249
219 1 15E CC MO ND 5710 5710 0.122
219 11 15E CC MO ND 5720 5720 0.104
219 12 15E CC MO ND 5530 5690 0.215
219 13 15E CC MO 5745 5825 0.254
219 14 15E CC MO 5755 5795 0.257
219 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
220 1 15E CC EP MO 5955 7115 0.003
220 2 15E CC EP MO 5965 7085 0.007
220 3 15E CC EP MO 5985 7025 0.012
220 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
221 1 15C CC 2402 2480 0.009
221 2 15C CC MO 2412 2472 0.979
221 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
222 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
223 1 15E CC MO 5180 5240 0.152
223 2 15E CC MO 5190 5230 0.182
223 3 15E CC MO 5210 5210 0.093
223 4 15E CC MO 5250 5250 0.064
223 5 15E CC MO ND 5260 5320 0.152
223 6 15E CC MO ND 5270 5310 0.194
223 7 15E CC MO ND 5290 5290 0.088
223 8 15E CC MO ND 5500 5700 0.154
223 9 15E CC MO ND 5510 5670 0.249
223 1 15E CC MO ND 5710 5710 0.122
223 11 15E CC MO ND 5720 5720 0.104
223 12 15E CC MO ND 5530 5690 0.215
223 13 15E CC MO 5745 5825 0.254
223 14 15E CC MO 5755 5795 0.257
223 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
224 1 15E CC EP MO 5955 7115 0.003
224 2 15E CC EP MO 5965 7085 0.007
224 3 15E CC EP MO 5985 7025 0.012
224 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
225 1 15C CC 2402 2480 0.009
225 2 15C CC MO 2412 2472 0.979
225 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
226 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
227 1 15E CC MO 5180 5240 0.152
227 2 15E CC MO 5190 5230 0.182
227 3 15E CC MO 5210 5210 0.093
227 4 15E CC MO 5250 5250 0.064
227 5 15E CC MO ND 5260 5320 0.152
227 6 15E CC MO ND 5270 5310 0.194
227 7 15E CC MO ND 5290 5290 0.088
227 8 15E CC MO ND 5500 5700 0.154
227 9 15E CC MO ND 5510 5670 0.249
227 1 15E CC MO ND 5710 5710 0.122
227 11 15E CC MO ND 5720 5720 0.104
227 12 15E CC MO ND 5530 5690 0.215
227 13 15E CC MO 5745 5825 0.254
227 14 15E CC MO 5755 5795 0.257
227 15 15E CC MO 5775 5775 0.212
227 16 15E CC MO 5845 5885 0.094
227 17 15E CC MO 5835 5875 0.202
227 18 15E CC MO 5855 5855 0.214
227 19 15E CC MO 5815 5815 0.086
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
228 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
229 1 15E CC MO 5955 7115 0.003
229 2 15E CC MO 5965 7085 0.007
229 3 15E CC MO 5985 7025 0.012
229 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
230 1 15C CC 2402 2480 0.009
230 2 15C CC MO 2412 2472 0.979
230 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
231 1 15E CC MO 5180 5240 0.152
231 2 15E CC MO 5190 5230 0.182
231 3 15E CC MO 5210 5210 0.093
231 4 15E CC MO 5250 5250 0.064
231 5 15E CC MO ND 5260 5320 0.152
231 6 15E CC MO ND 5270 5310 0.194
231 7 15E CC MO ND 5290 5290 0.088
231 8 15E CC MO ND 5500 5700 0.154
231 9 15E CC MO ND 5510 5670 0.249
231 1 15E CC MO ND 5710 5710 0.122
231 11 15E CC MO ND 5720 5720 0.104
231 12 15E CC MO ND 5530 5690 0.215
231 13 15E CC MO 5745 5825 0.254
231 14 15E CC MO 5755 5795 0.257
231 15 15E CC MO 5775 5775 0.212
231 16 15E CC MO 5845 5885 0.296
231 17 15E CC MO 5835 5875 0.64
231 18 15E CC MO 5855 5855 0.676
231 19 15E CC MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
232 1 15E CC MO 5180 5240 0.152
232 2 15E CC MO 5190 5230 0.182
232 3 15E CC MO 5210 5210 0.093
232 4 15E CC MO 5250 5250 0.064
232 5 15E CC MO ND 5260 5320 0.152
232 6 15E CC MO ND 5270 5310 0.194
232 7 15E CC MO ND 5290 5290 0.088
232 8 15E CC MO ND 5500 5700 0.154
232 9 15E CC MO ND 5510 5670 0.249
232 1 15E CC MO ND 5710 5710 0.122
232 11 15E CC MO ND 5720 5720 0.104
232 12 15E CC MO ND 5530 5690 0.215
232 13 15E CC MO 5745 5825 0.254
232 14 15E CC MO 5755 5795 0.257
232 15 15E CC MO 5775 5775 0.212
232 16 15E CC MO 5845 5885 0.296
232 17 15E CC MO 5835 5875 0.64
232 18 15E CC MO 5855 5855 0.676
232 19 15E CC MO 5815 5815 0.272
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
233 1 15E CC MO 5180 5240 0.152
233 2 15E CC MO 5190 5230 0.182
233 3 15E CC MO 5210 5210 0.093
233 4 15E CC MO 5250 5250 0.064
233 5 15E CC MO ND 5260 5320 0.152
233 6 15E CC MO ND 5270 5310 0.194
233 7 15E CC MO ND 5290 5290 0.088
233 8 15E CC MO ND 5500 5700 0.154
233 9 15E CC MO ND 5510 5670 0.249
233 1 15E CC MO ND 5710 5710 0.122
233 11 15E CC MO ND 5720 5720 0.104
233 12 15E CC MO ND 5530 5690 0.215
233 13 15E CC MO 5745 5825 0.254
233 14 15E CC MO 5755 5795 0.257
233 15 15E CC MO 5775 5775 0.212
233 16 15E CC MO 5845 5885 0.094
233 17 15E CC MO 5835 5875 0.202
233 18 15E CC MO 5855 5855 0.214
233 19 15E CC MO 5815 5815 0.086
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
234 1 15C CC 2402 2480 0.009
234 2 15C CC MO 2412 2472 0.979
234 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
235 1 15E CC EP MO 5955 7115 0.003
235 2 15E CC EP MO 5965 7085 0.007
235 3 15E CC EP MO 5985 7025 0.012
235 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
236 1 15E CC MO 5180 5240 0.152
236 2 15E CC MO 5190 5230 0.182
236 3 15E CC MO 5210 5210 0.093
236 4 15E CC MO 5250 5250 0.064
236 5 15E CC MO ND 5260 5320 0.152
236 6 15E CC MO ND 5270 5310 0.194
236 7 15E CC MO ND 5290 5290 0.088
236 8 15E CC MO ND 5500 5700 0.154
236 9 15E CC MO ND 5510 5670 0.249
236 1 15E CC MO ND 5710 5710 0.122
236 11 15E CC MO ND 5720 5720 0.104
236 12 15E CC MO ND 5530 5690 0.215
236 13 15E CC MO 5745 5825 0.254
236 14 15E CC MO 5755 5795 0.257
236 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
237 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
238 1 15C CC 2402 2480 0.009
238 2 15C CC MO 2412 2472 0.979
238 3 15C CC MO 2442 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
239 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
240 1 15E CC MO 5180 5240 0.152
240 2 15E CC MO 5190 5230 0.182
240 3 15E CC MO 5210 5210 0.093
240 4 15E CC MO 5250 5250 0.064
240 5 15E CC MO ND 5260 5320 0.152
240 6 15E CC MO ND 5270 5310 0.194
240 7 15E CC MO ND 5290 5290 0.088
240 8 15E CC MO ND 5500 5700 0.154
240 9 15E CC MO ND 5510 5670 0.249
240 1 15E CC MO ND 5710 5710 0.122
240 11 15E CC MO ND 5720 5720 0.104
240 12 15E CC MO ND 5530 5690 0.215
240 13 15E CC MO 5745 5825 0.254
240 14 15E CC MO 5755 5795 0.257
240 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
241 1 15E CC EP MO 5955 7115 0.003
241 2 15E CC EP MO 5965 7085 0.007
241 3 15E CC EP MO 5985 7025 0.012
241 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
242 1 15E CC EP MO 5955 7115 0.003
242 2 15E CC EP MO 5965 7085 0.007
242 3 15E CC EP MO 5985 7025 0.012
242 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
243 1 15E CC MO 5180 5240 0.152
243 2 15E CC MO 5190 5230 0.182
243 3 15E CC MO 5210 5210 0.093
243 4 15E CC MO 5250 5250 0.064
243 5 15E CC MO ND 5260 5320 0.152
243 6 15E CC MO ND 5270 5310 0.194
243 7 15E CC MO ND 5290 5290 0.088
243 8 15E CC MO ND 5500 5700 0.154
243 9 15E CC MO ND 5510 5670 0.249
243 1 15E CC MO ND 5710 5710 0.122
243 11 15E CC MO ND 5720 5720 0.104
243 12 15E CC MO ND 5530 5690 0.215
243 13 15E CC MO 5745 5825 0.254
243 14 15E CC MO 5755 5795 0.257
243 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
244 1 15C CC 2402 2480 0.009
244 2 15C CC MO 2412 2472 0.979
244 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
245 1 15E CC MO 5955 7115 0.003
245 2 15E CC MO 5965 7085 0.007
245 3 15E CC MO 5985 7025 0.012
245 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
246 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
247 1 15E CC MO 5955 7115 0.003
247 2 15E CC MO 5965 7085 0.007
247 3 15E CC MO 5985 7025 0.012
247 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
248 1 15E CC MO 5180 5240 0.152
248 2 15E CC MO 5190 5230 0.182
248 3 15E CC MO 5210 5210 0.093
248 4 15E CC MO 5250 5250 0.064
248 5 15E CC MO ND 5260 5320 0.152
248 6 15E CC MO ND 5270 5310 0.194
248 7 15E CC MO ND 5290 5290 0.088
248 8 15E CC MO ND 5500 5700 0.154
248 9 15E CC MO ND 5510 5670 0.249
248 1 15E CC MO ND 5710 5710 0.122
248 11 15E CC MO ND 5720 5720 0.104
248 12 15E CC MO ND 5530 5690 0.215
248 13 15E CC MO 5745 5825 0.254
248 14 15E CC MO 5755 5795 0.257
248 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
249 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
250 1 15E CC MO 5955 7115 0.003
250 2 15E CC MO 5965 7085 0.007
250 3 15E CC MO 5985 7025 0.012
250 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
251 1 15C CC 2402 2480 0.009
251 2 15C CC MO 2412 2472 0.979
251 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
252 1 15C CC 2402 2480 0.009
252 2 15C CC MO 2412 2472 0.979
252 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
253 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
254 1 15E CC MO 5180 5240 0.152
254 2 15E CC MO 5190 5230 0.182
254 3 15E CC MO 5210 5210 0.093
254 4 15E CC MO 5250 5250 0.064
254 5 15E CC MO ND 5260 5320 0.152
254 6 15E CC MO ND 5270 5310 0.194
254 7 15E CC MO ND 5290 5290 0.088
254 8 15E CC MO ND 5500 5700 0.154
254 9 15E CC MO ND 5510 5670 0.249
254 1 15E CC MO ND 5710 5710 0.122
254 11 15E CC MO ND 5720 5720 0.104
254 12 15E CC MO ND 5530 5690 0.215
254 13 15E CC MO 5745 5825 0.254
254 14 15E CC MO 5755 5795 0.257
254 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
255 1 15E CC MO 5955 7115 0.003
255 2 15E CC MO 5965 7085 0.007
255 3 15E CC MO 5985 7025 0.012
255 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
256 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
257 1 15E CC EP MO 5955 7115 0.003
257 2 15E CC EP MO 5965 7085 0.007
257 3 15E CC EP MO 5985 7025 0.012
257 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
258 1 15C CC 2402 2480 0.009
258 2 15C CC MO 2412 2472 0.979
258 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
259 1 15E CC MO 5180 5240 0.152
259 2 15E CC MO 5190 5230 0.182
259 3 15E CC MO 5210 5210 0.093
259 4 15E CC MO 5250 5250 0.064
259 5 15E CC MO ND 5260 5320 0.152
259 6 15E CC MO ND 5270 5310 0.194
259 7 15E CC MO ND 5290 5290 0.088
259 8 15E CC MO ND 5500 5700 0.154
259 9 15E CC MO ND 5510 5670 0.249
259 1 15E CC MO ND 5710 5710 0.122
259 11 15E CC MO ND 5720 5720 0.104
259 12 15E CC MO ND 5530 5690 0.215
259 13 15E CC MO 5745 5825 0.254
259 14 15E CC MO 5755 5795 0.257
259 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
260 1 15C CC 2402 2480 0.009
260 2 15C CC MO 2412 2472 0.979
260 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
261 1 15E CC MO 5180 5240 0.152
261 2 15E CC MO 5190 5230 0.182
261 3 15E CC MO 5210 5210 0.093
261 4 15E CC MO 5250 5250 0.064
261 5 15E CC MO ND 5260 5320 0.152
261 6 15E CC MO ND 5270 5310 0.194
261 7 15E CC MO ND 5290 5290 0.088
261 8 15E CC MO ND 5500 5700 0.154
261 9 15E CC MO ND 5510 5670 0.249
261 1 15E CC MO ND 5710 5710 0.122
261 11 15E CC MO ND 5720 5720 0.104
261 12 15E CC MO ND 5530 5690 0.215
261 13 15E CC MO 5745 5825 0.254
261 14 15E CC MO 5755 5795 0.257
261 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
262 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
263 1 15E CC EP MO 5955 7115 0.003
263 2 15E CC EP MO 5965 7085 0.007
263 3 15E CC EP MO 5985 7025 0.012
263 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
264 1 15C CC 2402 2480 0.009
264 2 15C CC MO 2412 2472 0.979
264 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
265 1 15C CC 2402 2480 0.009
265 2 15C CC MO 2412 2472 0.979
265 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
266 1 15E CC MO 5180 5240 0.152
266 2 15E CC MO 5190 5230 0.182
266 3 15E CC MO 5210 5210 0.093
266 4 15E CC MO 5250 5250 0.064
266 5 15E CC MO ND 5260 5320 0.152
266 6 15E CC MO ND 5270 5310 0.194
266 7 15E CC MO ND 5290 5290 0.088
266 8 15E CC MO ND 5500 5700 0.154
266 9 15E CC MO ND 5510 5670 0.249
266 1 15E CC MO ND 5710 5710 0.122
266 11 15E CC MO ND 5720 5720 0.104
266 12 15E CC MO ND 5530 5690 0.215
266 13 15E CC MO 5745 5825 0.254
266 14 15E CC MO 5755 5795 0.257
266 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
267 1 15C CC 2402 2480 0.009
267 2 15C CC MO 2412 2472 0.979
267 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
268 1 15E CC EP MO 5955 7115 0.003
268 2 15E CC EP MO 5965 7085 0.007
268 3 15E CC EP MO 5985 7025 0.012
268 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
269 1 15E CC MO 5955 7115 0.003
269 2 15E CC MO 5965 7085 0.007
269 3 15E CC MO 5985 7025 0.012
269 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
270 1 15E CC MO 5955 7115 0.003
270 2 15E CC MO 5965 7085 0.007
270 3 15E CC MO 5985 7025 0.012
270 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
271 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
272 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
273 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
274 1 15E CC MO 5180 5240 0.152
274 2 15E CC MO 5190 5230 0.182
274 3 15E CC MO 5210 5210 0.093
274 4 15E CC MO 5250 5250 0.064
274 5 15E CC MO ND 5260 5320 0.152
274 6 15E CC MO ND 5270 5310 0.194
274 7 15E CC MO ND 5290 5290 0.088
274 8 15E CC MO ND 5500 5700 0.154
274 9 15E CC MO ND 5510 5670 0.249
274 1 15E CC MO ND 5710 5710 0.122
274 11 15E CC MO ND 5720 5720 0.104
274 12 15E CC MO ND 5530 5690 0.215
274 13 15E CC MO 5745 5825 0.254
274 14 15E CC MO 5755 5795 0.257
274 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
275 1 15E CC MO 5180 5240 0.152
275 2 15E CC MO 5190 5230 0.182
275 3 15E CC MO 5210 5210 0.093
275 4 15E CC MO 5250 5250 0.064
275 5 15E CC MO ND 5260 5320 0.152
275 6 15E CC MO ND 5270 5310 0.194
275 7 15E CC MO ND 5290 5290 0.088
275 8 15E CC MO ND 5500 5700 0.154
275 9 15E CC MO ND 5510 5670 0.249
275 1 15E CC MO ND 5710 5710 0.122
275 11 15E CC MO ND 5720 5720 0.104
275 12 15E CC MO ND 5530 5690 0.215
275 13 15E CC MO ND 5745 5825 0.254
275 14 15E CC MO 5755 5795 0.257
275 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
276 1 15E CC MO 5180 5240 0.152
276 2 15E CC MO 5190 5230 0.182
276 3 15E CC MO 5210 5210 0.093
276 4 15E CC MO 5250 5250 0.064
276 5 15E CC MO ND 5260 5320 0.152
276 6 15E CC MO ND 5270 5310 0.194
276 7 15E CC MO ND 5290 5290 0.088
276 8 15E CC MO ND 5500 5700 0.154
276 9 15E CC MO ND 5510 5670 0.249
276 1 15E CC MO ND 5710 5710 0.122
276 11 15E CC MO ND 5720 5720 0.104
276 12 15E CC MO ND 5530 5690 0.215
276 13 15E CC MO 5745 5825 0.254
276 14 15E CC MO 5755 5795 0.257
276 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
277 1 15E CC MO 5955 7115 0.003
277 2 15E CC MO 5965 7085 0.007
277 3 15E CC MO 5985 7025 0.012
277 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
278 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
279 1 15C CC 2402 2480 0.009
279 2 15C CC MO 2412 2472 0.979
279 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
280 1 15E CC MO 5180 5240 0.152
280 2 15E CC MO 5190 5230 0.182
280 3 15E CC MO 5210 5210 0.093
280 4 15E CC MO 5250 5250 0.064
280 5 15E CC MO ND 5260 5320 0.152
280 6 15E CC MO ND 5270 5310 0.194
280 7 15E CC MO ND 5290 5290 0.088
280 8 15E CC MO ND 5500 5700 0.154
280 9 15E CC MO ND 5510 5670 0.249
280 1 15E CC MO ND 5710 5710 0.122
280 11 15E CC MO ND 5720 5720 0.104
280 12 15E CC MO ND 5530 5690 0.215
280 13 15E CC MO 5745 5825 0.254
280 14 15E CC MO 5755 5795 0.257
280 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
281 1 15C CC 2402 2480 0.009
281 2 15C CC MO 2412 2472 0.979
281 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
282 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
283 1 15E CC MO 5955 7115 0.003
283 2 15E CC MO 5965 7085 0.007
283 3 15E CC MO 5985 7025 0.012
283 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
284 1 15E CC MO 5180 5240 0.152
284 2 15E CC MO 5190 5230 0.182
284 3 15E CC MO 5210 5210 0.093
284 4 15E CC MO 5250 5250 0.064
284 5 15E CC MO ND 5260 5320 0.152
284 6 15E CC MO ND 5270 5310 0.194
284 7 15E CC MO ND 5290 5290 0.088
284 8 15E CC MO ND 5500 5700 0.154
284 9 15E CC MO ND 5510 5670 0.249
284 1 15E CC MO ND 5710 5710 0.122
284 11 15E CC MO ND 5720 5720 0.104
284 12 15E CC MO ND 5530 5690 0.215
284 13 15E CC MO 5745 5825 0.254
284 14 15E CC MO 5755 5795 0.257
284 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
285 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
286 1 15E CC MO 5955 7115 0.003
286 2 15E CC MO 5965 7085 0.007
286 3 15E CC MO 5985 7025 0.012
286 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
287 1 15C CC 2402 2480 0.009
287 2 15C CC MO 2412 2472 0.979
287 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
288 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
289 1 15E CC MO 5955 7115 0.003
289 2 15E CC MO 5965 7085 0.007
289 3 15E CC MO 5985 7025 0.012
289 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
290 1 15C CC 2402 2480 0.009
290 2 15C CC MO 2412 2472 0.979
290 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
291 1 15E CC MO 5180 5240 0.152
291 2 15E CC MO 5190 5230 0.182
291 3 15E CC MO 5210 5210 0.093
291 4 15E CC MO 5250 5250 0.064
291 5 15E CC MO ND 5260 5320 0.152
291 6 15E CC MO ND 5270 5310 0.194
291 7 15E CC MO ND 5290 5290 0.088
291 8 15E CC MO ND 5500 5700 0.154
291 9 15E CC MO ND 5510 5670 0.249
291 1 15E CC MO ND 5710 5710 0.122
291 11 15E CC MO ND 5720 5720 0.104
291 12 15E CC MO ND 5530 5690 0.215
291 13 15E CC MO 5745 5825 0.254
291 14 15E CC MO 5755 5795 0.257
291 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
292 1 15E CC MO 5180 5240 0.152
292 2 15E CC MO 5190 5230 0.182
292 3 15E CC MO 5210 5210 0.093
292 4 15E CC MO 5250 5250 0.064
292 5 15E CC MO ND 5260 5320 0.152
292 6 15E CC MO ND 5270 5310 0.194
292 7 15E CC MO ND 5290 5290 0.088
292 8 15E CC MO ND 5500 5700 0.154
292 9 15E CC MO ND 5510 5670 0.249
292 1 15E CC MO ND 5710 5710 0.122
292 11 15E CC MO ND 5720 5720 0.104
292 12 15E CC MO ND 5530 5690 0.215
292 13 15E CC MO 5745 5825 0.254
292 14 15E CC MO 5755 5795 0.257
292 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
293 1 15C CC 2402 2480 0.009
293 2 15C CC MO 2412 2472 0.979
293 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
294 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
295 1 15E CC MO 5955 7115 0.003
295 2 15E CC MO 5965 7085 0.007
295 3 15E CC MO 5985 7025 0.012
295 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
296 1 15C CC 2402 2480 0.009
296 2 15C CC MO 2412 2472 0.979
296 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
297 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
298 1 15E CC MO 5955 7115 0.003
298 2 15E CC MO 5965 7085 0.007
298 3 15E CC MO 5985 7025 0.012
298 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
299 1 15E CC MO 5180 5240 0.152
299 2 15E CC MO 5190 5230 0.182
299 3 15E CC MO 5210 5210 0.093
299 4 15E CC MO 5250 5250 0.064
299 5 15E CC MO ND 5260 5320 0.152
299 6 15E CC MO ND 5270 5310 0.194
299 7 15E CC MO ND 5290 5290 0.088
299 8 15E CC MO ND 5500 5700 0.154
299 9 15E CC MO ND 5510 5670 0.249
299 1 15E CC MO ND 5710 5710 0.122
299 11 15E CC MO ND 5720 5720 0.104
299 12 15E CC MO ND 5530 5690 0.215
299 13 15E CC MO 5745 5825 0.254
299 14 15E CC MO 5755 5795 0.257
299 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
300 1 15E CC MO 5955 7115 0.003
300 2 15E CC MO 5965 7085 0.007
300 3 15E CC MO 5985 7025 0.012
300 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
301 1 15E CC MO 5180 5240 0.152
301 2 15E CC MO 5190 5230 0.182
301 3 15E CC MO 5210 5210 0.093
301 4 15E CC MO 5250 5250 0.064
301 5 15E CC MO ND 5260 5320 0.152
301 6 15E CC MO ND 5270 5310 0.194
301 7 15E CC MO ND 5290 5290 0.088
301 8 15E CC MO ND 5500 5700 0.154
301 9 15E CC MO ND 5510 5670 0.249
301 1 15E CC MO ND 5710 5710 0.122
301 11 15E CC MO ND 5720 5720 0.104
301 12 15E CC MO ND 5530 5690 0.215
301 13 15E CC MO 5745 5825 0.254
301 14 15E CC MO 5755 5795 0.257
301 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
302 1 15C CC 2402 2480 0.009
302 2 15C CC MO 2412 2472 0.979
302 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
303 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
304 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
305 1 15E CC MO 5180 5240 0.152
305 2 15E CC MO 5190 5230 0.182
305 3 15E CC MO 5210 5210 0.093
305 4 15E CC MO 5250 5250 0.064
305 5 15E CC MO ND 5260 5320 0.152
305 6 15E CC MO ND 5270 5310 0.194
305 7 15E CC MO ND 5290 5290 0.088
305 8 15E CC MO ND 5500 5700 0.154
305 9 15E CC MO ND 5510 5670 0.249
305 1 15E CC MO ND 5710 5710 0.122
305 11 15E CC MO ND 5720 5720 0.104
305 12 15E CC MO ND 5530 5690 0.215
305 13 15E CC MO 5745 5825 0.254
305 14 15E CC MO 5755 5795 0.257
305 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
306 1 15E CC MO 5955 7115 0.003
306 2 15E CC MO 5965 7085 0.007
306 3 15E CC MO 5985 7025 0.012
306 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
307 1 15C CC 2402 2480 0.009
307 2 15C CC MO 2412 2472 0.979
307 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
308 1 15C CC 2402 2480 0.009
308 2 15C CC MO 2412 2472 0.979
308 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
309 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
310 1 15E CC MO 5180 5240 0.152
310 2 15E CC MO 5190 5230 0.182
310 3 15E CC MO 5210 5210 0.093
310 4 15E CC MO 5250 5250 0.064
310 5 15E CC MO ND 5260 5320 0.152
310 6 15E CC MO ND 5270 5310 0.194
310 7 15E CC MO ND 5290 5290 0.088
310 8 15E CC MO ND 5500 5700 0.154
310 9 15E CC MO ND 5510 5670 0.249
310 1 15E CC MO ND 5710 5710 0.122
310 11 15E CC MO ND 5720 5720 0.104
310 12 15E CC MO ND 5530 5690 0.215
310 13 15E CC MO 5745 5825 0.254
310 14 15E CC MO 5755 5795 0.257
310 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
311 1 15E CC MO 5955 7115 0.003
311 2 15E CC MO 5965 7085 0.007
311 3 15E CC MO 5985 7025 0.012
311 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
312 1 15C CC 2402 2480 0.009
312 2 15C CC MO 2412 2472 0.979
312 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
313 1 15E CC MO 5180 5240 0.152
313 2 15E CC MO 5190 5230 0.182
313 3 15E CC MO 5210 5210 0.093
313 4 15E CC MO 5250 5250 0.064
313 5 15E CC MO ND 5260 5320 0.152
313 6 15E CC MO ND 5270 5310 0.194
313 7 15E CC MO ND 5290 5290 0.088
313 8 15E CC MO ND 5500 5700 0.154
313 9 15E CC MO ND 5510 5670 0.249
313 1 15E CC MO ND 5710 5710 0.122
313 11 15E CC MO ND 5720 5720 0.104
313 12 15E CC MO ND 5530 5690 0.215
313 13 15E CC MO 5745 5825 0.254
313 14 15E CC MO 5755 5795 0.257
313 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
314 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
315 1 15E CC MO 5955 7115 0.003
315 2 15E CC MO 5965 7085 0.007
315 3 15E CC MO 5985 7025 0.012
315 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
316 1 15E CC MO 5180 5240 0.152
316 2 15E CC MO 5190 5230 0.182
316 3 15E CC MO 5210 5210 0.093
316 4 15E CC MO 5250 5250 0.064
316 5 15E CC MO ND 5260 5320 0.152
316 6 15E CC MO ND 5270 5310 0.194
316 7 15E CC MO ND 5290 5290 0.088
316 8 15E CC MO ND 5500 5700 0.154
316 9 15E CC MO ND 5510 5670 0.249
316 1 15E CC MO ND 5710 5710 0.122
316 11 15E CC MO ND 5720 5720 0.104
316 12 15E CC MO ND 5530 5690 0.215
316 13 15E CC MO 5745 5825 0.254
316 14 15E CC MO 5755 5795 0.257
316 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
317 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
318 1 15C CC 2402 2480 0.009
318 2 15C CC MO 2412 2472 0.979
318 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
319 1 15E CC MO 5955 7115 0.003
319 2 15E CC MO 5965 7085 0.007
319 3 15E CC MO 5985 7025 0.012
319 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
320 1 15C CC 2402 2480 0.009
320 2 15C CC MO 2412 2472 0.979
320 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
321 1 15E CC MO 5955 7115 0.003
321 2 15E CC MO 5965 7085 0.007
321 3 15E CC MO 5985 7025 0.012
321 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
322 1 15E CC MO 5180 5240 0.152
322 2 15E CC MO 5190 5230 0.182
322 3 15E CC MO 5210 5210 0.093
322 4 15E CC MO 5250 5250 0.064
322 5 15E CC MO ND 5260 5320 0.152
322 6 15E CC MO ND 5270 5310 0.194
322 7 15E CC MO ND 5290 5290 0.088
322 8 15E CC MO ND 5500 5700 0.154
322 9 15E CC MO ND 5510 5670 0.249
322 1 15E CC MO ND 5710 5710 0.122
322 11 15E CC MO ND 5720 5720 0.104
322 12 15E CC MO ND 5530 5690 0.215
322 13 15E CC MO 5745 5825 0.254
322 14 15E CC MO 5755 5795 0.257
322 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
323 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
324 1 15E CC MO 5955 7115 0.003
324 2 15E CC MO 5965 7085 0.007
324 3 15E CC MO 5985 7025 0.012
324 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
325 1 15C CC 2402 2480 0.009
325 2 15C CC MO 2412 2472 0.979
325 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
326 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
327 1 15E CC MO 5180 5240 0.152
327 2 15E CC MO 5190 5230 0.182
327 3 15E CC MO 5210 5210 0.093
327 4 15E CC MO 5250 5250 0.064
327 5 15E CC MO ND 5260 5320 0.152
327 6 15E CC MO ND 5270 5310 0.194
327 7 15E CC MO ND 5290 5290 0.088
327 8 15E CC MO ND 5500 5700 0.154
327 9 15E CC MO ND 5510 5670 0.249
327 1 15E CC MO ND 5710 5710 0.122
327 11 15E CC MO ND 5720 5720 0.104
327 12 15E CC MO ND 5530 5690 0.215
327 13 15E CC MO 5745 5825 0.254
327 14 15E CC MO 5755 5795 0.257
327 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
328 1 15E CC MO 5955 7115 0.003
328 2 15E CC MO 5965 7085 0.007
328 3 15E CC MO 5985 7025 0.012
328 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
329 1 15C CC 2402 2480 0.009
329 2 15C CC MO 2412 2472 0.979
329 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
330 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
331 1 15E CC MO 5180 5240 0.152
331 2 15E CC MO 5190 5230 0.182
331 3 15E CC MO 5210 5210 0.093
331 4 15E CC MO 5250 5250 0.064
331 5 15E CC MO ND 5260 5320 0.152
331 6 15E CC MO ND 5270 5310 0.194
331 7 15E CC MO ND 5290 5290 0.088
331 8 15E CC MO ND 5500 5700 0.154
331 9 15E CC MO ND 5510 5670 0.249
331 1 15E CC MO ND 5710 5710 0.122
331 11 15E CC MO ND 5720 5720 0.104
331 12 15E CC MO ND 5530 5690 0.215
331 13 15E CC MO 5745 5825 0.254
331 14 15E CC MO 5755 5795 0.257
331 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
332 1 15E CC MO 5180 5240 0.152
332 2 15E CC MO 5190 5230 0.182
332 3 15E CC MO 5210 5210 0.093
332 4 15E CC MO 5250 5250 0.064
332 5 15E CC MO ND 5260 5320 0.152
332 6 15E CC MO ND 5270 5310 0.194
332 7 15E CC MO ND 5290 5290 0.088
332 8 15E CC MO ND 5500 5700 0.154
332 9 15E CC MO ND 5510 5670 0.249
332 1 15E CC MO ND 5710 5710 0.122
332 11 15E CC MO ND 5720 5720 0.104
332 12 15E CC MO ND 5530 5690 0.215
332 13 15E CC MO 5745 5825 0.254
332 14 15E CC MO 5755 5795 0.257
332 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
333 1 15C CC 2402 2480 0.009
333 2 15C CC MO 2412 2472 0.979
333 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
334 1 15E CC MO 5955 7115 0.003
334 2 15E CC MO 5965 7085 0.007
334 3 15E CC MO 5985 7025 0.012
334 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
335 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
336 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
337 1 15E CC MO 5180 5240 0.152
337 2 15E CC MO 5190 5230 0.182
337 3 15E CC MO 5210 5210 0.093
337 4 15E CC MO 5250 5250 0.064
337 5 15E CC MO ND 5260 5320 0.152
337 6 15E CC MO ND 5270 5310 0.194
337 7 15E CC MO ND 5290 5290 0.088
337 8 15E CC MO ND 5500 5700 0.154
337 9 15E CC MO ND 5510 5670 0.249
337 1 15E CC MO ND 5710 5710 0.122
337 11 15E CC MO ND 5720 5720 0.104
337 12 15E CC MO ND 5530 5690 0.215
337 13 15E CC MO 5745 5825 0.254
337 14 15E CC MO 5755 5795 0.257
337 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
338 1 15C CC 2402 2480 0.009
338 2 15C CC MO 2412 2472 0.979
338 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
339 1 15E CC MO 5955 7115 0.003
339 2 15E CC MO 5965 7085 0.007
339 3 15E CC MO 5985 7025 0.012
339 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
340 1 15C CC 2402 2480 0.009
340 2 15C CC MO 2412 2472 0.979
340 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
341 1 15E CC MO 5180 5240 0.152
341 2 15E CC MO 5190 5230 0.182
341 3 15E CC MO 5210 5210 0.093
341 4 15E CC MO 5250 5250 0.064
341 5 15E CC MO ND 5260 5320 0.152
341 6 15E CC MO ND 5270 5310 0.194
341 7 15E CC MO ND 5290 5290 0.088
341 8 15E CC MO ND 5500 5700 0.154
341 9 15E CC MO ND 5510 5670 0.249
341 1 15E CC MO ND 5710 5710 0.122
341 11 15E CC MO ND 5720 5720 0.104
341 12 15E CC MO ND 5530 5690 0.215
341 13 15E CC MO 5745 5825 0.254
341 14 15E CC MO 5755 5795 0.257
341 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
342 1 15E CC MO 5955 7115 0.003
342 2 15E CC MO 5965 7085 0.007
342 3 15E CC MO 5985 7025 0.012
342 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
343 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
344 1 15E CC MO 5180 5240 0.152
344 2 15E CC MO 5190 5230 0.182
344 3 15E CC MO 5210 5210 0.093
344 4 15E CC MO 5250 5250 0.064
344 5 15E CC MO ND 5260 5320 0.152
344 6 15E CC MO ND 5270 5310 0.194
344 7 15E CC MO ND 5290 5290 0.088
344 8 15E CC MO ND 5500 5700 0.154
344 9 15E CC MO ND 5510 5670 0.249
344 1 15E CC MO ND 5710 5710 0.122
344 11 15E CC MO ND 5720 5720 0.104
344 12 15E CC MO ND 5530 5690 0.215
344 13 15E CC MO 5745 5825 0.254
344 14 15E CC MO 5755 5795 0.257
344 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
345 1 15C CC 2402 2480 0.008
345 2 15C CC MO 2412 2472 0.979
345 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
346 1 15E CC MO 5955 7115 0.003
346 2 15E CC MO 5965 7085 0.007
346 3 15E CC MO 5985 7025 0.012
346 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
347 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
348 1 15C CC 2402 2480 0.008
348 2 15C CC MO 2412 2472 0.979
348 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
349 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
350 1 15E CC MO 5180 5240 0.152
350 2 15E CC MO 5190 5230 0.182
350 3 15E CC MO 5210 5210 0.093
350 4 15E CC MO 5250 5250 0.064
350 5 15E CC MO ND 5260 5320 0.152
350 6 15E CC MO ND 5270 5310 0.194
350 7 15E CC MO ND 5290 5290 0.088
350 8 15E CC MO ND 5500 5700 0.154
350 9 15E CC MO ND 5510 5670 0.249
350 1 15E CC MO ND 5710 5710 0.122
350 11 15E CC MO ND 5720 5720 0.104
350 12 15E CC MO ND 5530 5690 0.215
350 13 15E CC MO 5745 5825 0.254
350 14 15E CC MO 5755 5795 0.257
350 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
351 1 15E CC MO 5955 7115 0.003
351 2 15E CC MO 5965 7085 0.007
351 3 15E CC MO 5985 7025 0.012
351 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
352 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
353 1 15E CC MO 5955 7115 0.003
353 2 15E CC MO 5965 7085 0.007
353 3 15E CC MO 5985 7025 0.012
353 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
354 1 15E CC MO 5180 5240 0.152
354 2 15E CC MO 5190 5230 0.182
354 3 15E CC MO 5210 5210 0.093
354 4 15E CC MO 5250 5250 0.064
354 5 15E CC MO ND 5260 5320 0.152
354 6 15E CC MO ND 5270 5310 0.194
354 7 15E CC MO ND 5290 5290 0.088
354 8 15E CC MO ND 5500 5700 0.154
354 9 15E CC MO ND 5510 5670 0.249
354 1 15E CC MO ND 5710 5710 0.122
354 11 15E CC MO ND 5720 5720 0.104
354 12 15E CC MO ND 5530 5690 0.215
354 13 15E CC MO 5745 5825 0.254
354 14 15E CC MO 5755 5795 0.257
354 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
355 1 15C CC 2402 2480 0.008
355 2 15C CC MO 2412 2472 0.979
355 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
356 1 15E CC MO 5180 5240 0.152
356 2 15E CC MO 5190 5230 0.182
356 3 15E CC MO 5210 5210 0.93
356 4 15E CC MO 5250 5250 0.064
356 5 15E CC MO ND 5260 5320 0.152
356 6 15E CC MO ND 5270 5310 0.194
356 7 15E CC MO ND 5290 5290 0.088
356 8 15E CC MO ND 5500 5700 0.154
356 9 15E CC MO ND 5510 5670 0.249
356 1 15E CC MO ND 5710 5710 0.122
356 11 15E CC MO ND 5720 5720 0.104
356 12 15E CC MO ND 5530 5690 0.215
356 13 15E CC MO 5745 5825 0.254
356 14 15E CC MO 5755 5795 0.257
356 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
357 1 15C CC 2402 2480 0.008
357 2 15C CC MO 2412 2472 0.979
357 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
358 1 15E CC MO 5955 7115 0.003
358 2 15E CC MO 5965 7085 0.007
358 3 15E CC MO 5985 7025 0.012
358 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
359 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
360 1 15E CC MO 5955 7115 0.003
360 2 15E CC MO 5965 7085 0.007
360 3 15E CC MO 5985 7025 0.012
360 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
361 1 15E CC MO 5180 5240 0.152
361 2 15E CC MO 5190 5230 0.182
361 3 15E CC MO 5210 5210 0.093
361 4 15E CC MO 5250 5250 0.064
361 5 15E CC MO ND 5260 5320 0.152
361 6 15E CC MO ND 5270 5310 0.194
361 7 15E CC MO ND 5290 5290 0.088
361 8 15E CC MO ND 5500 5700 0.154
361 9 15E CC MO ND 5510 5670 0.249
361 1 15E CC MO ND 5710 5710 0.122
361 11 15E CC MO ND 5720 5720 0.104
361 12 15E CC MO ND 5530 5690 0.215
361 13 15E CC MO 5745 5825 0.254
361 14 15E CC MO 5755 5795 0.257
361 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
362 1 15C CC 2402 2480 0.008
362 2 15C CC MO 2412 2472 0.979
362 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
363 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
364 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
365 1 15E CC MO 5955 7115 0.003
365 2 15E CC MO 5965 7085 0.007
365 3 15E CC MO 5985 7025 0.012
365 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
366 1 15C CC 2402 2480 0.008
366 2 15C CC MO 2412 2472 0.979
366 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
367 1 15E CC MO 5180 5240 0.152
367 2 15E CC MO 5190 5230 0.182
367 3 15E CC MO 5210 5210 0.093
367 4 15E CC MO 5250 5250 0.064
367 5 15E CC MO ND 5260 5320 0.152
367 6 15E CC MO ND 5270 5310 0.194
367 7 15E CC MO ND 5290 5290 0.088
367 8 15E CC MO ND 5500 5700 0.154
367 9 15E CC MO ND 5510 5670 0.249
367 1 15E CC MO ND 5710 5710 0.122
367 11 15E CC MO ND 5720 5720 0.104
367 12 15E CC MO ND 5530 5690 0.215
367 13 15E CC MO 5745 5825 0.254
367 14 15E CC MO 5755 5795 0.257
367 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
368 1 15C CC 2402 2480 0.008
368 2 15C CC MO 2412 2472 0.979
368 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
369 1 15E CC MO 5955 7115 0.003
369 2 15E CC MO 5965 7085 0.007
369 3 15E CC MO 5985 7025 0.012
369 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
370 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
371 1 15E CC MO 5180 5240 0.152
371 2 15E CC MO 5190 5230 0.182
371 3 15E CC MO 5210 5210 0.093
371 4 15E CC MO 5250 5250 0.064
371 5 15E CC MO ND 5260 5320 0.152
371 6 15E CC MO ND 5270 5310 0.194
371 7 15E CC MO ND 5290 5290 0.088
371 8 15E CC MO ND 5500 5700 0.154
371 9 15E CC MO ND 5510 5670 0.249
371 1 15E CC MO ND 5710 5710 0.122
371 11 15E CC MO ND 5720 5720 0.104
371 12 15E CC MO ND 5530 5690 0.215
371 13 15E CC MO 5745 5825 0.254
371 14 15E CC MO 5755 5795 0.257
371 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
372 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
373 1 15E CC MO 5180 5240 0.152
373 2 15E CC MO 5190 5230 0.182
373 3 15E CC MO 5210 5210 0.093
373 4 15E CC MO 5250 5250 0.064
373 5 15E CC MO ND 5260 5320 0.152
373 6 15E CC MO ND 5270 5310 0.194
373 7 15E CC MO ND 5290 5290 0.088
373 8 15E CC MO ND 5500 5700 0.154
373 9 15E CC MO ND 5510 5670 0.249
373 1 15E CC MO ND 5710 5710 0.122
373 11 15E CC MO ND 5720 5720 0.104
373 12 15E CC MO ND 5530 5690 0.215
373 13 15E CC MO 5745 5825 0.254
373 14 15E CC MO 5755 5795 0.257
373 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
374 1 15C CC 2402 2480 0.008
374 2 15C CC MO 2412 2472 0.979
374 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
375 1 15E CC MO 5955 7115 0.003
375 2 15E CC MO 5965 7085 0.007
375 3 15E CC MO 5985 7025 0.012
375 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
376 1 15E CC MO 5955 7115 0.003
376 2 15E CC MO 5965 7085 0.007
376 3 15E CC MO 5985 7025 0.012
376 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
377 1 15C CC 2402 2480 0.008
377 2 15C CC MO 2412 2472 0.979
377 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
378 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
379 1 15E CC MO 5180 5240 0.152
379 2 15E CC MO 5190 5230 0.182
379 3 15E CC MO 5210 5210 0.093
379 4 15E CC MO 5250 5250 0.064
379 5 15E CC MO ND 5260 5320 0.152
379 6 15E CC MO ND 5270 5310 0.194
379 7 15E CC MO ND 5290 5290 0.088
379 8 15E CC MO ND 5500 5700 0.154
379 9 15E CC MO ND 5510 5670 0.249
379 1 15E CC MO ND 5710 5710 0.122
379 11 15E CC MO ND 5720 5720 0.104
379 12 15E CC MO ND 5530 5690 0.215
379 13 15E CC MO 5745 5825 0.254
379 14 15E CC MO 5755 5795 0.257
379 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
380 1 15E CC MO 5955 7115 0.003
380 2 15E CC MO 5965 7085 0.007
380 3 15E CC MO 5985 7025 0.012
380 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
381 1 15C CC 2402 2480 0.008
381 2 15C CC MO 2412 2472 0.979
381 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
382 1 15E CC MO 5180 5240 0.152
382 2 15E CC MO 5190 5230 0.182
382 3 15E CC MO 5210 5210 0.093
382 4 15E CC MO 5250 5250 0.064
382 5 15E CC MO ND 5260 5320 0.152
382 6 15E CC MO ND 5270 5310 0.194
382 7 15E CC MO ND 5290 5290 0.088
382 8 15E CC MO ND 5500 5700 0.154
382 9 15E CC MO ND 5510 5670 0.249
382 1 15E CC MO ND 5710 5710 0.122
382 11 15E CC MO ND 5720 5720 0.104
382 12 15E CC MO ND 5530 5690 0.215
382 13 15E CC MO 5745 5825 0.254
382 14 15E CC MO 5755 5795 0.257
382 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
383 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
384 1 15E CC MO 5180 5240 0.152
384 2 15E CC MO 5190 5230 0.182
384 3 15E CC MO 5210 5210 0.093
384 4 15E CC MO 5250 5250 0.064
384 5 15E CC MO ND 5260 5320 0.152
384 6 15E CC MO ND 5270 5310 0.194
384 7 15E CC MO ND 5290 5290 0.088
384 8 15E CC MO ND 5500 5700 0.154
384 9 15E CC MO ND 5510 5670 0.249
384 1 15E CC MO ND 5710 5710 0.122
384 11 15E CC MO ND 5720 5720 0.104
384 12 15E CC MO ND 5530 5690 0.215
384 13 15E CC MO 5745 5825 0.254
384 14 15E CC MO 5755 5795 0.257
384 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
385 1 15E CC MO 5955 7115 0.003
385 2 15E CC MO 5965 7085 0.007
385 3 15E CC MO 5985 7025 0.012
385 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
386 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
387 1 15C CC 2402 2480 0.009
387 2 15C CC MO 2412 2472 0.979
387 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
388 1 15E CC MO 5955 7115 0.003
388 2 15E CC MO 5965 7085 0.007
388 3 15E CC MO 5985 7025 0.012
388 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
389 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
390 1 15E CC MO 5180 5240 0.152
390 2 15E CC MO 5190 5230 0.182
390 3 15E CC MO 5210 5210 0.093
390 4 15E CC MO 5250 5250 0.064
390 5 15E CC MO ND 5260 5320 0.152
390 6 15E CC MO ND 5270 5310 0.194
390 7 15E CC MO ND 5290 5290 0.088
390 8 15E CC MO ND 5500 5700 0.154
390 9 15E CC MO ND 5510 5670 0.249
390 1 15E CC MO ND 5710 5710 0.122
390 11 15E CC MO ND 5720 5720 0.104
390 12 15E CC MO ND 5530 5690 0.215
390 13 15E CC MO 5745 5825 0.254
390 14 15E CC MO 5755 5795 0.257
390 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
391 1 15C CC 2402 2480 0.009
391 2 15C CC MO 2412 2472 0.979
391 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
392 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
393 1 15E CC MO 5955 7115 0.003
393 2 15E CC MO 5965 7085 0.007
393 3 15E CC MO 5985 7025 0.012
393 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
394 1 15E CC MO 5180 5240 0.152
394 2 15E CC MO 5190 5230 0.182
394 3 15E CC MO 5210 5210 0.093
394 4 15E CC MO 5250 5250 0.064
394 5 15E CC MO ND 5260 5320 0.152
394 6 15E CC MO ND 5270 5310 0.194
394 7 15E CC MO ND 5290 5290 0.088
394 8 15E CC MO ND 5500 5700 0.154
394 9 15E CC MO ND 5510 5670 0.249
394 1 15E CC MO ND 5710 5710 0.122
394 11 15E CC MO ND 5720 5720 0.104
394 12 15E CC MO ND 5530 5690 0.215
394 13 15E CC MO 5745 5825 0.254
394 14 15E CC MO 5755 5795 0.257
394 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
395 1 15C CC 2402 2480 0.009
395 2 15C CC MO 2412 2472 0.979
395 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
396 1 15C CC 2402 2480 0.009
396 2 15C CC MO 2412 2472 0.979
396 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
397 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
398 1 15E CC MO 5180 5240 0.152
398 2 15E CC MO 5190 5230 0.182
398 3 15E CC MO 5210 5210 0.093
398 4 15E CC MO 5250 5250 0.064
398 5 15E CC MO ND 5260 5320 0.152
398 6 15E CC MO ND 5270 5310 0.194
398 7 15E CC MO ND 5290 5290 0.088
398 8 15E CC MO ND 5500 5700 0.154
398 9 15E CC MO ND 5510 5670 0.249
398 1 15E CC MO ND 5710 5710 0.122
398 11 15E CC MO ND 5720 5720 0.104
398 12 15E CC MO ND 5530 5690 0.215
398 13 15E CC MO 5745 5825 0.254
398 14 15E CC MO 5755 5795 0.257
398 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
399 1 15C CC 2402 2480 0.009
399 2 15C CC MO 2412 2472 0.979
399 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
400 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
401 1 15E CC MO 5180 5240 0.152
401 2 15E CC MO 5190 5230 0.182
401 3 15E CC MO 5210 5210 0.093
401 4 15E CC MO 5250 5250 0.064
401 5 15E CC MO ND 5260 5320 0.152
401 6 15E CC MO ND 5270 5310 0.194
401 7 15E CC MO ND 5290 5290 0.088
401 8 15E CC MO ND 5500 5700 0.154
401 9 15E CC MO ND 5510 5670 0.249
401 1 15E CC MO ND 5710 5710 0.122
401 11 15E CC MO ND 5720 5720 0.104
401 12 15E CC MO ND 5530 5690 0.215
401 13 15E CC MO 5745 5825 0.254
401 14 15E CC MO 5755 5795 0.257
401 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
402 1 15E CC MO 5955 7115 0.003
402 2 15E CC MO 5965 7085 0.007
402 3 15E CC MO 5985 7025 0.012
402 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
403 1 15E CC MO 5955 7115 0.003
403 2 15E CC MO 5965 7085 0.007
403 3 15E CC MO 5985 7025 0.012
403 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
404 1 15E CC MO 5955 7115 0.003
404 2 15E CC MO 5965 7085 0.007
404 3 15E CC MO 5985 7025 0.012
404 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
405 1 15C CC 2402 2480 0.009
405 2 15C CC MO 2412 2472 0.979
405 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
406 1 15E CC MO 5955 7115 0.003
406 2 15E CC MO 5965 7085 0.007
406 3 15E CC MO 5985 7025 0.012
406 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
407 1 15E CC MO 5180 5240 0.152
407 2 15E CC MO 5190 5230 0.182
407 3 15E CC MO 5210 5210 0.093
407 4 15E CC MO 5250 5250 0.064
407 5 15E CC MO ND 5260 5320 0.152
407 6 15E CC MO ND 5270 5310 0.194
407 7 15E CC MO ND 5290 5290 0.088
407 8 15E CC MO ND 5500 5700 0.154
407 9 15E CC MO ND 5510 5670 0.249
407 1 15E CC MO ND 5710 5710 0.122
407 11 15E CC MO ND 5720 5720 0.104
407 12 15E CC MO ND 5530 5690 0.215
407 13 15E CC MO 5745 5825 0.254
407 14 15E CC MO 5755 5795 0.257
407 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
408 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
409 1 15C CC 2402 2480 0.009
409 2 15C CC MO 2412 2472 0.979
409 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
410 1 15E CC MO 5180 5240 0.152
410 2 15E CC MO 5190 5230 0.182
410 3 15E CC MO 5210 5210 0.093
410 4 15E CC MO 5250 5250 0.064
410 5 15E CC MO ND 5260 5320 0.152
410 6 15E CC MO ND 5270 5310 0.194
410 7 15E CC MO ND 5290 5290 0.088
410 8 15E CC MO ND 5500 5700 0.154
410 9 15E CC MO ND 5510 5670 0.249
410 1 15E CC MO ND 5710 5710 0.122
410 11 15E CC MO ND 5720 5720 0.104
410 12 15E CC MO ND 5530 5690 0.215
410 13 15E CC MO 5745 5825 0.254
410 14 15E CC MO 5755 5795 0.257
410 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
411 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
412 1 15E CC MO 5180 5240 0.152
412 2 15E CC MO 5190 5230 0.182
412 3 15E CC MO 5210 5210 0.093
412 4 15E CC MO 5250 5250 0.064
412 5 15E CC MO ND 5260 5320 0.152
412 6 15E CC MO ND 5270 5310 0.194
412 7 15E CC MO ND 5290 5290 0.088
412 8 15E CC MO ND 5500 5700 0.154
412 9 15E CC MO ND 5510 5670 0.249
412 1 15E CC MO ND 5710 5710 0.122
412 11 15E CC MO ND 5720 5720 0.104
412 12 15E CC MO ND 5530 5690 0.215
412 13 15E CC MO 5745 5825 0.254
412 14 15E CC MO 5755 5795 0.257
412 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
413 1 15C CC 2402 2480 0.009
413 2 15C CC MO 2412 2472 0.979
413 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
414 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
415 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
416 1 15C CC 2402 2480 0.009
416 2 15C CC MO 2412 2472 0.979
416 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
417 1 15E CC MO 5180 5240 0.152
417 2 15E CC MO 5190 5230 0.182
417 3 15E CC MO 5210 5210 0.093
417 4 15E CC MO 5250 5250 0.064
417 5 15E CC MO ND 5260 5320 0.152
417 6 15E CC MO ND 5270 5310 0.194
417 7 15E CC MO ND 5290 5290 0.088
417 8 15E CC MO ND 5500 5700 0.154
417 9 15E CC MO ND 5510 5670 0.249
417 1 15E CC MO ND 5710 5710 0.122
417 11 15E CC MO ND 5720 5720 0.104
417 12 15E CC MO ND 5530 5690 0.215
417 13 15E CC MO 5745 5825 0.254
417 14 15E CC MO 5755 5795 0.257
417 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
418 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
419 1 15C CC 2402 2480 0.009
419 2 15C CC MO 2412 2472 0.979
419 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
420 1 15E CC MO 5180 5230 0.152
420 2 15E CC MO 5190 5230 0.182
420 3 15E CC MO 5210 5210 0.093
420 4 15E CC MO 5250 5250 0.064
420 5 15E CC MO ND 5260 5320 0.152
420 6 15E CC MO ND 5270 5310 0.194
420 7 15E CC MO ND 5290 5290 0.088
420 8 15E CC MO ND 5500 5700 0.154
420 9 15E CC MO ND 5510 5670 0.249
420 1 15E CC MO ND 5710 5710 0.122
420 11 15E CC MO ND 5720 5720 0.104
420 12 15E CC MO ND 5530 5690 0.215
420 13 15E CC MO 5745 5825 0.254
420 14 15E CC MO 5755 5795 0.257
420 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
421 1 15E CC EP MO 5955 7115 0.003
421 2 15E CC EP MO 5965 7085 0.007
421 3 15E CC EP MO 5985 7025 0.012
421 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
422 1 15B
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
423 1 15E CC MO 5180 5240 0.152
423 2 15E CC MO 5190 5230 0.182
423 3 15E CC MO 5210 5210 0.093
423 4 15E CC MO 5250 5250 0.064
423 5 15E CC MO ND 5260 5320 0.152
423 6 15E CC MO ND 5270 5310 0.194
423 7 15E CC MO ND 5290 5290 0.088
423 8 15E CC MO ND 5500 5700 0.154
423 9 15E CC MO ND 5510 5670 0.249
423 1 15E CC MO ND 5710 5710 0.122
423 11 15E CC MO ND 5720 5720 0.104
423 12 15E CC MO ND 5530 5690 0.215
423 13 15E CC MO 5745 5825 0.254
423 14 15E CC MO 5755 5795 0.257
423 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
424 1 15C CC 2402 2480 0.009
424 2 15C CC MO 2412 2472 0.979
424 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
425 1 15C CC 2402.00000000 2480.00000000 0.0110000

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC