|
app
s
|
Applicant Information
|
|
|
various
|
Effective |
2023-08-30
|
|
various
|
2023-05-22
|
|
various
|
2023-04-21
|
|
various
|
2023-03-30
|
|
various
|
2023-02-01
|
|
various
|
2022-12-27
|
|
various
|
2022-12-25
|
|
various
|
2022-11-09
|
|
various
|
2022-11-04
|
|
various
|
2022-10-06
|
|
various
|
2022-10-04
|
|
various
|
2022-08-24
|
|
various
|
2022-07-26
|
|
various
|
2022-06-03
|
|
various
|
2022-03-28
|
|
various
|
2022-03-24
|
|
various
|
2022-03-02
|
|
various
|
2022-01-27
|
|
various
|
2021-11-08
|
|
various
|
2021-09-09
|
|
various
|
Applicant's complete, legal business name |
Intel Corporation
|
|
various
|
FCC Registration Number (FRN) |
0033159344
|
|
various
|
0008035131
|
|
various
|
Physical Address |
425 rue de Goa Le Cargo B6
|
|
various
|
100 Center Point Circle Suite 200
|
|
various
|
425 rue de Goa
|
|
various
|
100 Center Point Circle
|
|
various
|
Antibes, N/A
|
|
various
|
Columbia, SC
|
|
various
|
Antibes, N/A 06600
|
|
various
|
Columbia, South Carolina 29210
|
|
various
|
France
|
|
various
|
United States
|
|
|
app
s
|
TCB Information
|
|
various
|
TCB Application Email Address |
s******@intel.com
|
|
various
|
h******@acbcert.com
|
|
various
|
K******@sporton-usa.com
|
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
various
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
|
app
s
|
FCC ID
|
|
various
|
Grantee Code |
PD9
|
|
various
|
Equipment Product Code |
AX411NG
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
various
|
Name |
B****** L******
|
|
various
|
S**** C****** H******
|
|
various
|
Title |
Regulatory Engineer
|
|
various
|
Product Regulations Engineer
|
|
various
|
Telephone Number |
04930********
|
|
various
|
803-3********
|
|
various
|
Fax Number |
04930********
|
|
various
|
803-2********
|
|
various
|
E-mail |
b******@intel.com
|
|
various
|
s******@intel.com
|
|
|
app
s
|
Technical Contact
|
|
various
|
Firm Name |
Intel Mobile Communications
|
|
various
|
Intel Corporation
|
|
various
|
Name |
S****** C****** H******
|
|
various
|
S**** H********
|
|
various
|
Physical Address |
100 Center Point Circle
|
|
various
|
100 center Point Circle
|
|
various
|
100 Center Point Circle Suite 200
|
|
various
|
Columbia, 29212
|
|
various
|
Columbia, 29210
|
|
various
|
Columbia, South Carolina 29210
|
|
various
|
United States
|
|
various
|
Telephone Number |
80321********
|
|
various
|
80331********
|
|
various
|
E-mail |
s******@intel.com
|
|
|
app
s
|
Non Technical Contact
|
|
various
|
Firm Name |
Intel Corporation
|
|
various
|
Name |
G**** C****
|
|
various
|
B****** L********
|
|
various
|
Physical Address |
425 rue de Goa
|
|
various
|
Antibes, 06600
|
|
various
|
France
|
|
various
|
Telephone Number |
+3349********
|
|
various
|
E-mail |
g******@intel.com
|
|
various
|
B******@intel.com
|
|
|
app
s
|
Confidentiality (long or short term)
|
| various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| various | No |
| various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| various | No |
| various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 02/24/2024 |
| various | 11/18/2023 |
| various | 10/19/2023 |
| various | 09/27/2023 |
| various | 09/26/2023 |
| various | 08/01/2023 |
| various | 06/26/2023 |
| various | 06/24/2023 |
| various | 05/03/2023 |
| various | 04/04/2023 |
| various | 04/03/2023 |
| various | 01/23/2023 |
| various | 11/30/2022 |
| various | 09/24/2022 |
| various | 09/19/2022 |
| various | 08/30/2022 |
| various | 07/26/2022 |
| various | 05/07/2022 |
| various | 03/08/2022 |
| various | 03/07/2022 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| various |
Is this application for software defined/cognitive radio authorization? | No |
| various | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| various | 6XD - 15E 6 GHz Low Power Indoor Client |
| various | DSS - Part 15 Spread Spectrum Transmitter |
| various | DTS - Digital Transmission System |
| various | JBP - Part 15 Class B Computing Device Peripheral |
| various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Intel AX411 |
| various | Intel Wi-Fi 6E AX411 |
| various | Intel WiFi 6E AX411 |
| various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
| various | No |
| various | Modular Equipment Type | Single Modular Approval |
| various | Does not apply |
| various | Purpose / Application is for | Class II Permissive Change |
| various | Class II permissive change or modification of presently authorized equipment |
| various | Original Equipment |
| various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| various | Grant Comments | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz and 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations.
Addition of a new antenna and antenna type for the UNII-4 Band. (Antenna type: Dipole Antenna Wieson Part no ARY121-0009-002-H0). |
| various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz and 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.38W/kg and 1.07W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P162G Notebook PC with WNC DC33002QV0L and DC33002QV1L antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, and 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 15mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P120F PC. The highest reported Body and Simultaneous SAR values are 0.41 W/kg and 1.16 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz and 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.38W/kg and 1.07W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P162G Notebook PC with WNC DC33002QV0L and DC33002QV1L antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06 W/kg and 1.07 W/kg respectively.
This change establishes portable category SAR conditions for the
Dell model P162G Notebook PC with WNC DC33002QV0L and DC33002QV1L
antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.07W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P162G Notebook PC with WNC DC33002QV0L and DC33002QV1L antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.25W/kg and 1.07W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P162G Notebook PC with WNC DC33002QV0L and DC33002QV1L antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance.
This change establishes portable category SAR conditions for the Dell model P120F PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.39 W/kg respectively.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this
filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and
160 MHz BW modes. |
| various | Power Output listed is conducted. Modular approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This change establishes portable category SAR conditions for the Dell model P120F PC. The highest reported Body and Simultaneous SAR values are 0.11 W/kg and 0.87 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This change establishes portable category SAR conditions for the Dell model P120F PC. The highest reported Body and Simultaneous SAR values are 0.75 W/kg and 1.28 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This change establishes portable category SAR conditions for the Dell model P120F PC. The highest reported Body and Simultaneous SAR values are 0.41 W/kg and 1.16 W/kg respectively. |
| various | Power Output listed is conducted. Modular approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This change establishes portable category SAR conditions for the Dell model P171G PC with WNC 81EABW15.G15 and 81EABW15.G16 antennas. The highest reported Body and Simultaneous SAR values are 0.22 W/kg and 1.54 W/kg respectively. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance.
This change establishes portable category SAR conditions for the Dell model P171G PC with WNC 81EABW15.G15 and 81EABW15.G16 antennas. The highest reported Body and Simultaneous SAR values are 0.93 W/kg and 1.59 W/kg respectively.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this
filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and
160 MHz BW modes. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This change establishes portable category SAR conditions for the Dell model P171G PC with WNC 81EABW15.G15 and 81EABW15.G16 antennas. TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.66 W/kg and 1.59 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This change establishes portable category SAR conditions for the Dell model P171G PC with WNC 81EABW15.G15 and 81EABW15.G16 antennas. TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.93 W/kg and 1.59 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This change establishes portable category SAR conditions for the Dell model P125F PC with AWAN 025.9025N.0011 and 025.9025O.0011 antennas. TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.39 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This change establishes portable category SAR conditions for the Dell model P125F PC with AWAN 025.9025N.0011 and 025.9025O.0011 antennas. TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.69 W/kg and 1.39 W/kg respectively. |
| various | Power Output listed is conducted. Modular approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This change establishes portable category SAR conditions for the Dell model P125F PC with AWAN 025.9025N.0011 and 025.9025O.0011 antennas. The highest reported Body and Simultaneous SAR values are 0.31 W/kg and 1.39 W/kg respectively. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance.
This change establishes portable category SAR conditions for the Dell model P125F PC with AWAN 025.9025N.0011 and 025.9025O.0011 antennas. The highest reported Body and Simultaneous SAR values are 0.67 W/kg and 1.42 W/kg respectively.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this
filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz and 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value. Simultaneous SAR values are 0.74 W/kg and 1.49 W/kg respectively. |
| various | Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value Simultaneous SAR values are 0.72 W/kg and 1.28 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This C2PC establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. The highest reported Body and Simultaneous SAR values are 0.15 W/kg and 1.45 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. The highest reported Body and Simultaneous SAR values are 0.74 W/kg and 1.45 W/kg respectively. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This C2PC establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. The highest reported Body and Simultaneous SAR values are 0.40 W/kg and 1.44 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. The highest reported Body and Simultaneous SAR values are 0.76 W/kg and 1.37 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. The highest reported Body and Simultaneous SAR values are 0.58 W/kg and 1.43 W/kg respectively. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This C2PC establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. The highest reported Body and Simultaneous SAR values are 0.66 W/kg and 1.45 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. The highest reported Body and Simultaneous SAR values are 0.72 W/kg and 1.48 W/kg respectively. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This C2PC establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. The highest reported Body and Simultaneous SAR values are 0.21 W/kg and 1.48 W/kg respectively. |
| various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, and 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.48W/kg and 1.28W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 15mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This change establishes portable category SAR conditions for the HP model TPN-C154 PC. The highest reported Body and Simultaneous SAR values are 1.29 W/kg and 1.29 W/kg respectively.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This change establishes portable category SAR conditions for the HP model TPN-C154 PC. The highest reported Body and Simultaneous SAR values are 0.20 W/kg and 0.31 W/kg respectively.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This change establishes portable category SAR conditions for the HP model TPN-C154 PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 0.97 W/kg respectively.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance.
This change establishes portable category SAR conditions for the HP model TPN-C154 PC. The highest reported Body and Simultaneous SAR values are 0.24 W/kg and 0.44 W/kg respectively.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04 W/kg and 0.35 W/kg respectively.
This change establishes portable category SAR conditions for the Dell
model P111F PC with AWAN AXP8Y DC33002 -100009 and AXP8Y DC33002 -100004 and WNC 81EABJ15.G60 and 81EABG15.G23 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or
similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers
must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.32 W/kg and 1.37 W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C155 PC with INPAQ DC33002K3C0 antenna.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described
in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band
operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and
Simultaneous SAR values are 0.59W/kg and 1.37W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C155 PC with INPAQ DC33002K3C0 antenna.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.37W/kg respectively.
This change establishes portable category SAR conditions for the HP
model TPN-C155 PC with INPAQ DC33002K3C0 antenna.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations.
Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used
with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot
be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host
integrator must be provided with antenna installation instructions and transmitter operating conditions to
satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration,
enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.15W/kg and
1.37W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C155 PC with INPAQ DC33002K3C0 antenna.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described
in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band
operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.61W/kg and 1.02W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P111F PC with AWAN AXP8Y DC33002 -100009 and AXP8Y DC33002IV -100004 and WNC 81EABJ15.G60 and 81EABG15.G60 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations.
Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used
with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot
be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host
integrator must be provided with antenna installation instructions and transmitter operating conditions to
satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration,
enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.17W/kg and
1.02W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P111F PC with AWAN AXP8Y DC33002 -100009 and AXP8Y DC33002IV -100004 and WNC 81EABJ15.G60 and 81EABG15.G60 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported
Body and Simultaneous SAR values are 0.05W/kg and 1.02W/kg respectively.
This change establishes portable category SAR conditions for the Dell
model P111F PC with AWAN AXP8Y DC33002 -100009 and AXP8Y DC33002IV
-100004 and WNC 81EABJ15.G60 and 81EABG15.G60 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations.
Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used
with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot
be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host
integrator must be provided with antenna installation instructions and transmitter operating conditions to
satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration,
enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they choose to
integrate into a host product. This filing meets KDB447498 as a mobile device.
Addition of a new antenna, antenna type is different than the original application.(Antenna type: Dipole Antenna). |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. This filing meets KDB447498 as a mobile device.
Addition of a new antenna, antenna type is different than the original application.(Antenna type: Dipole Antenna). |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This filing meets KDB447498 as a mobile device.
Addition of a new antenna, antenna type is different than the original application.(Antenna type: Dipole Antenna / 6XD Grant).
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described
in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band
operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets KDB447498 as a mobile device.
Addition of a new antenna, antenna type is different than the original application.(Antenna type: Dipole Antenna). |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.23W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P150G PC with SPEED F-0G-FH-6144-003-00 and WNC DC33002L72L antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.
Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures.
This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s)
with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation
of this device into specific final products may require the submission of a permissive change application, containing
appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth
modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4
or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for
complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.64W/kg and 1.23W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P150G PC with SPEED F-0G-FH-6144-003-00 and WNC DC33002L72L antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations.
Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used
with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change
application, containing appropriate data demonstrating compliance,or a new application. OEM/Host
integrator must be provided with antenna installation instructions and transmitter operating conditions to
satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.57W/kg and 1.23W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P150G PC with SPEED F-0G-FH-6144-003-00 and WNC DC33002L72L antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11 W/kg and 1.23 W/kg respectively.
This change establishes portable category SAR conditions for the Dell
model P150G PC with SPEED F-0G-FH-6144-003-00 and WNC DC33002L72L
antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multi-transmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or
similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must
be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.74 W/kg respectively.
This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 15mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When
all conditions of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance, or a new
application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client
only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in
this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions
and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and
Simultaneous SAR values are 0.48W/kg and 1.28W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 15mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multi-transmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or
similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must
be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.28W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 15mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
| various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.39W/kg and 1.28W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 15mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
| various | Is there an equipment authorization waiver associated with this application? | No |
| various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
various
|
Firm Name |
Intel Corporation S.A.S.
|
|
various
|
SPORTON International Inc.
|
|
various
|
TUV Rheinland Nederland B.V.
|
|
various
|
Name |
N******** A****
|
|
various
|
A****** C********
|
|
various
|
R******** v****
|
|
various
|
Telephone Number |
00334********
|
|
various
|
+886-******** Extension:
|
|
various
|
00334********
|
|
various
|
31-08********
|
|
various
|
Fax Number |
00334********
|
|
various
|
31-59********
|
|
various
|
E-mail |
n******@intel.com
|
|
various
|
a******@sporton.com.tw
|
|
various
|
r******@nl.tuv.com
|
|