app
s
|
Applicant Information
|
|
1 2 3
|
Effective |
2019-11-07
|
1 2 3
|
2019-03-26
|
1 2 3
|
Applicant's complete, legal business name |
Silicon Laboratories Finland Oy
|
1 2 3
|
FCC Registration Number (FRN) |
0007782659
|
1 2 3
|
Physical Address |
Alberga Business Park, Bertel Jungin aukio 3
|
1 2 3
|
Espoo, N/A
|
1 2 3
|
Espoo, N/A 02600
|
1 2 3
|
Finland
|
|
app
s
|
TCB Information
|
1 2 3
|
TCB Application Email Address |
a******@dekra.com
|
1 2 3
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
1 2 3
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
app
s
|
FCC ID
|
1 2 3
|
Grantee Code |
QOQ
|
1 2 3
|
Equipment Product Code |
WGM160P
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3
|
Name |
P****** R******
|
1 2 3
|
Title |
Staff HW Engineer
|
1 2 3
|
Telephone Number |
+3589********
|
1 2 3
|
Fax Number |
+3589********
|
1 2 3
|
E-mail |
p******@silabs.com
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 05/05/2020 |
1 2 3 | 09/22/2019 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 | Equipment Class | DTS - Digital Transmission System |
1 2 3 | JAB - Part 15 Class B Digital Device |
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wi-Fi bgn wireless radio module with embedded full stack |
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
1 2 3 | No |
1 2 3 | Modular Equipment Type | Single Modular Approval |
1 2 3 | Purpose / Application is for | Class II Permissive Change |
1 2 3 | Original Equipment |
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 | Grant Comments | Output power is conducted.
Single Modular Approval.
Compliance of this device in all final product configurations is the responsibility of the Grantee.
Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate.
This device is approved for mobile and fixed use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance.
Multi-transmitter, supporting simultaneous transmission, configurations have not been evaluated and shall be evaluated according to KDB Publication 447498 and §15.31(h) and §15.31(k) composite system.
Class 2 Permissive change to modify one impedance match component of the internal antenna and the application board size. |
1 2 3 | Output power is conducted.
Single Modular Approval.
Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate.
This device is approved for mobile and fixed use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance.
Multi-transmitter, supporting simultaneous transmission, configurations have not been evaluated and shall be evaluated according to KDB Publication 447498 and §15.31(h) and §15.31(k) composite system. |
1 2 3 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3
|
Firm Name |
DEKRA Testing and Certification, S.A.U.
|
1 2 3
|
Name |
F******** C********
|
1 2 3
|
Telephone Number |
34-95********
|
1 2 3
|
Fax Number |
34-95********
|
1 2 3
|
E-mail |
f******@dekra.com
|
|