app
s
|
Applicant Information
|
|
various
|
Effective |
2021-02-07
|
various
|
2020-08-30
|
various
|
2020-02-26
|
various
|
2020-01-06
|
various
|
Applicant's complete, legal business name |
MediaTek Inc.
|
various
|
FCC Registration Number (FRN) |
0022229074
|
various
|
Physical Address |
No. 1, Dusing 1st Rd. Hsinchu Science Park
|
various
|
No. 1, Dusing 1st Rd.
|
various
|
Hsinchu City
|
various
|
Taiwan
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
h******@acbcert.com
|
various
|
c******@nacsemc.com
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
RAS
|
various
|
Equipment Product Code |
MT7663
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
S******
|
various
|
Title |
Manager
|
various
|
Telephone Number |
886-3******** Extension:
|
various
|
Fax Number |
886-3********
|
various
|
E-mail |
s******@mediatek.com
|
|
app
s
|
Technical Contact
|
various
|
Firm Name |
DEKRA Testing and Certification Co., Ltd.
|
various
|
Name |
T**** H****
|
various
|
Physical Address |
Taiwan
|
various
|
E-mail |
t******@dekra.com
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
various | Yes |
various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 02/27/2021 |
various | 08/24/2020 |
various | 07/04/2020 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
various | DSS - Part 15 Spread Spectrum Transmitter |
various | DTS - Digital Transmission System |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 2TX 11ac + BLE Combo Card |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
various | Modular Equipment Type | Limited Single Modular Approval |
various | Single Modular Approval |
various | Purpose / Application is for | Class II Permissive Change |
various | Original Equipment |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Class II Permissive Change to add a portable RF Exposure configuration for Laptop host (ASUS models: S532F, K532F, V532F, K532E, S532E and V532E, with the PIFA antennas used as WA-P-LB-02-647 (ASUS no. 04072-03320100), WA-P-LB-01-225 (ASUS no. 04072-03320100), WA-P-LB-02-647-1 (ASUS no. 04072-03320000) and WA- P-LB-01-225-1 (ASUS no. 04072-03320000)) with reduced power through BIOS respectively. The highest reported SAR value for body and simultaneously transmitting exposure conditions are 0.96 W/kg and 1.02 W/kg respectively.
Power listed is maximum combined conducted output power. This device supports 20, 40, and 80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
various | Class II Permissive Change to add a portable RF Exposure configuration for Laptop host (ASUS models: S532F, K532F, V532F, K532E, S532E and V532E, with the PIFA antennas used as WA-P-LB-02-647 (ASUS no. 04072-03320100), WA-P-LB-01-225 (ASUS no. 04072-03320100), WA-P-LB-02-647-1 (ASUS no. 04072-03320000) and WA-P-LB-01-225-1 (ASUS no. 04072-03320000)) with reduced power through BIOS respectively. The highest reported SAR value for body and simultaneously transmitting exposure conditions are 0.14 W/kg and 1.02 W/kg respectively.
Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
various | Class II Permissive Change to add a portable RF Exposure configuration for Laptop host (ASUS models: S532F, K532F, V532F, K532E, S532E and V532E, with the PIFA antennas used as WA-P-LB-02-647 (ASUS no. 04072-03320100), WA-P-LB-01-225 (ASUS no. 04072-03320100), WA-P-LB-02-647-1 (ASUS no. 04072-03320000) and WA- P-LB-01-225-1 (ASUS no. 04072-03320000)) with reduced power through BIOS respectively. The highest reported SAR value for body and simultaneously transmitting exposure conditions are 1.06 W/kg and 1.0 W/kg respectively.
Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co- transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
various | Class II Permissive Change to enable channels 12-13 (HT20) and 10-11 (HT40) via software as described in this filing. When used in portable RF exposure configuration for laptop host with reduced power, the module antennas must be installed in the laptop host to provide a separation distance of at least 5 mm from all person(s), while the separation distance between the two antennas must be at least 11 cm apart. Also, the module output power must be fixed to the respective power settings and follow the provided OEM instructions as described in this filing. The highest reported SAR value for body and simultaneously transmitting exposure conditions are 0.33 W/kg and 0.68 W/kg respectively.
Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
various | Class II Permissive Change to add portable RF exposure configuration for laptop host with reduced power. The module antennas must be installed in the laptop host to provide a separation distance of at least 5 mm from all person(s), while the separation distance between the two antennas must be at least 11 cm apart. Also, the module output power must be fixed to the respective power settings and follow the provided OEM instructions as described in this filing. The highest reported SAR value for body and simultaneously transmitting exposure conditions are 0.33 W/kg and 0.68 W/kg respectively.
Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
various | Class II Permissive Change to add portable RF exposure configuration for laptop host with reduced power. The module antennas must be installed in the laptop host to provide a separation distance of at least 5 mm from all person(s), while the separation distance between the two antennas must be at least 11 cm apart. Also, the module output power must be fixed to the respective power settings and follow the provided OEM instructions as described in this filing. The highest reported SAR value for body and simultaneously transmitting exposure conditions are 0.79 W/kg and 0.68 W/kg respectively.
Power listed is maximum combined conducted output power. This device supports 20, 40, and 80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
various | Class II Permissive Change to add portable RF exposure configuration for laptop host with reduced power. The module antennas must be installed in the laptop host to provide a separation distance of at least 5 mm from all person(s), while the separation distance between the two antennas must be at least 11 cm apart. Also, the module output power must be fixed to the respective power settings and follow the provided OEM instructions as described in this filing. The highest reported SAR value for body and simultaneously transmitting exposure conditions are 0.12 W/kg and 0.68 W/kg respectively.
Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
various | Power listed is maximum combined conducted output power. This device supports 20, 40, and 80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
various | Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
various | Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
DEKRA TESTING AND CERTIFICATION Lin Kou Lab.
|
various
|
Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
|
various
|
Name |
V****** L****
|
various
|
E**** L********
|
various
|
Telephone Number |
88628******** Extension:
|
various
|
886-3******** Extension:
|
various
|
Fax Number |
88628********
|
various
|
+886-********
|
various
|
E-mail |
v******@dekra.com
|
various
|
e******@tw.bureauveritas.com
|
|