app
s
|
Applicant Information
|
|
various
|
Effective |
2022-03-11
|
various
|
2022-01-28
|
various
|
2021-11-03
|
various
|
2021-07-26
|
various
|
2021-06-21
|
various
|
2021-02-17
|
various
|
2021-01-05
|
various
|
Applicant's complete, legal business name |
MediaTek Inc.
|
various
|
FCC Registration Number (FRN) |
0022229074
|
various
|
0010188456
|
various
|
Physical Address |
No. 1, Dusing 1st Rd. Hsinchu Science Park
|
various
|
No. 1, Dusing 1st Rd.
|
various
|
Hsinchu City, N/A
|
various
|
Taiwan
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
c******@telefication.com
|
various
|
c******@nacsemc.com
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
RAS
|
various
|
Equipment Product Code |
MT7921K
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
S******
|
various
|
Title |
Manager
|
various
|
Telephone Number |
886-3******** Extension:
|
various
|
Fax Number |
886-3********
|
various
|
E-mail |
s******@mediatek.com
|
|
app
s
|
Technical Contact
|
various
|
Firm Name |
Bureau Veritas Consumer Products Services (H.K.)
|
various
|
Bureau Veritas Consumer Products Services
|
various
|
Name |
K******** L****
|
various
|
Physical Address |
E-2,no.1,Li Hsin 1st Road, Hsinchu Science Park
|
various
|
Taiwan
|
various
|
Telephone Number |
+8863********
|
various
|
+8863******** Extension:
|
various
|
Fax Number |
88633********
|
various
|
E-mail |
k******@bureauveritas.com
|
|
app
s
|
Non Technical Contact
|
various
|
Firm Name |
Bureau Veritas Consumer Products Services (H.K.)
|
various
|
Bureau Veritas Consumer Products Services
|
various
|
Name |
A**** H********
|
various
|
D**** L********
|
various
|
Physical Address |
No.19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan
|
various
|
No.19, Hwa Ya 2nd Rd., Wen Hwa Vil.
|
various
|
Taiwan
|
various
|
Telephone Number |
+8863********
|
various
|
+8863******** Extension:
|
various
|
+8863******** Extension:
|
various
|
E-mail |
a******@bureauveritas.com
|
various
|
D******@bureauveritas.com
|
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
various | Yes |
various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 04/07/2022 |
various | 01/23/2022 |
various | 12/18/2021 |
various | 08/17/2021 |
various | 07/04/2021 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | DTS - Digital Transmission System |
various | 6XD - 15E 6 GHz Low Power Indoor Client |
various | NII - Unlicensed National Information Infrastructure TX |
various | DSS - Part 15 Spread Spectrum Transmitter |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 2TX 11ax (WiFi6E) +BT/BLE Combo Card |
various | 2TX 11ax (WiFi6E) + BT/BLE Combo Card |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
various | Modular Equipment Type | Single Modular Approval |
various | Purpose / Application is for | Class II Permissive Change |
various | Original Equipment |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | C2PC: 1. Enabling UNII-4 and UNII-3 & UNII-4 span channels by software. 2. Verify the power of UNII band. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.72 W/kg and 0.80 W/kg, respectively.
Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
various | C2PC: 1. Enabling UNII-4 and UNII-3 & UNII-4 span channels by software. 2. Verify the power of UNII band. Power Density and SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.47 W/kg and 0.55 W/kg, respectively.
C2PC: Adding 2 new antennas.
C2PC: 1. Re-test CBP testing. 2. Updating Tx power value for SAR testing and be used for portable device. Power Density and SAR testing was performed to demonstrate RF exposure compliance.
Power listed is maximum combined conducted output power. This module is authorized for Low Power Indoor Client applications only; final host product must be for indoor operations only. This device supports 20, 40, and 80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. For 5.925-7.125 GHz, the antenna information is described in the filling. |
various | C2PC: 1. Enabling UNII-4 and UNII-3 & UNII-4 span channels by software. 2. Verify the power of UNII band. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.76 W/kg and 0.87 W/kg, respectively.
Power listed is maximum combined conducted output power. This device supports 20, 40, and 80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
various | C2PC: Adding 2 new antennas.
C2PC: 1. Re-test CBP testing. 2. Updating Tx power value for SAR testing and be used for portable device. Power Density and SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.47 W/kg and 0.55 W/kg, respectively.
Power listed is maximum combined conducted output power. This module is authorized for Low Power Indoor Client applications only; final host product must be for indoor operations only. This device supports 20, 40, and 80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. For 5.925-7.125 GHz, the antenna information is described in the filling. |
various | C2PC: 1. Re-test CBP testing. 2. Updating Tx power value for SAR testing and be used for portable device. Power Density and SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.47 W/kg and 0.55 W/kg, respectively.
Power listed is maximum combined conducted output power. This module is authorized for Low Power Indoor Client applications only; final host product must be for indoor operations only. This device supports 20, 40, and 80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. For 5.925-7.125 GHz, the antenna information is described in the filling. |
various | Class II Permissive Change to add two new antenna sets as described in this filing (Models LA9RF059-CS-H & 14008-02650500 with max 1.40 dBi & 3.08 dBi gain respectively).
Power listed is maximum combined conducted output power. This module is authorized for Low Power Indoor Client applications only; final host product must be for indoor operations only. This device supports 20, 40, and 80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. For 5.925-7.125GHz band operation, only those antenna(s) tested with this device or of same type with equal or lesser gain (no lower than 0 dBi) may be used with this module. |
various | Class II Permissive Change to add one new antenna set (Model: JR2Q00340-1) with max 3.93 dBi gain as described in the filing.
Power listed is maximum combined conducted output power. This module is authorized for Low Power Indoor Client applications only; final host product must be for indoor operations only. This device supports 20, 40, and 80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. For 5.925-7.125GHz band operation, only the tested antenna (Model No. RFMTA311020EMMB301 with max 3.31 dBi gain in 6 GHz band) can be used with this approval; all other antennas with higher or lower antenna gain will need a C2PC re-evaluation or new certification. |
various | Class II Permissive Change to add one new antenna set (Model: RFMTA311020EMMB301_V02) with max 4.76 dBi gain as described in the filing.
Power listed is maximum combined conducted output power. This module is authorized for Low Power Indoor Client applications only; final host product must be for indoor operations only. This device supports 20, 40, and 80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. For 5.925-7.125GHz band operation, only the tested antenna (Model No. RFMTA311020EMMB301 with max 3.31 dBi gain in 6 GHz band) can be used with this approval; all other antennas with higher or lower antenna gain will need a C2PC re-evaluation or new certification. |
various | Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
various | Power listed is maximum combined conducted output power. This module is authorized for Low Power Indoor Client applications only; final host product must be for indoor operations only. This device supports 20, 40, and 80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. For 5.925-7.125GHz band operation, only the tested antenna (Model No. RFMTA311020EMMB301 with max 3.31 dBi gain in 6 GHz band) can be used with this approval; all other antennas with higher or lower antenna gain will need a C2PC re-evaluation or new certification. |
various | Power listed is maximum combined conducted output power. This device supports 20, 40, and 80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
various | Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
|
various
|
Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
|
various
|
Name |
R******** C****
|
various
|
E******** L******
|
various
|
Telephone Number |
+886-********
|
various
|
886-3******** Extension:
|
various
|
Fax Number |
+886-********
|
various
|
+886-********
|
various
|
E-mail |
r******@bureauveritas.com
|
various
|
e******@tw.bureauveritas.com
|
|