FCC ID: HLZ7265NG 7265NGW

by: Acer Incorporated latest update: 2019-05-02 model: 7265NG

Sixty grants have been issued under this FCC ID from 10/02/2014 to 05/02/2019 (this is one of seventy-seven releases in 2019 for this grantee). Public details available include frequency information, manuals, and internal & external photos. some products also feature user submitted or linked password defaults, drivers, troubleshooting guides, warrantee terms, & instructions.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various Quick guide Users Manual pdf 1.91 MiB
various Safety guide Users Manual pdf 1.03 MiB
various TempConfidential [STC] User Manual Users Manual pdf 41.70 KiB
various User Manual Users Manual pdf 4.78 MiB
various User Manual Safety Users Manual pdf 2.05 MiB
various User Manual Safety Guide Users Manual pdf 1.06 MiB November 08 2015 / July 02 2016
various User Manual-A715-73Grolsch KLS UM Users Manual pdf 4.25 MiB December 02 2019 / December 08 2019
various User Manual-Acer Regulatory Information and Safety Guide Users Manual pdf 1.17 MiB December 02 2019 / December 08 2019
various User Manual-Regulatory,safty guide Users Manual pdf 625.86 KiB
various User Manual Safety Guide Users Manual pdf 1.58 MiB March 10 2014 / August 04 2015
various Users Manual Users Manual pdf 2.86 MiB
various Users Manual-Acer Regulatory and Safety Guide Users Manual pdf 1.61 MiB
various Internal Photo Internal Photos pdf 3.59 MiB March 10 2014 / August 04 2015
various Internal Photos Internal Photos pdf 942.92 KiB December 02 2019 / December 08 2019
various Confidentiality Letter External Photos pdf 22.76 KiB
various External Photo External Photos pdf 518.05 KiB March 10 2014 / August 04 2015
various External Photo Ver.02 External Photos pdf 1.83 MiB March 10 2014 / August 04 2015
various External Photos External Photos pdf 621.62 KiB December 02 2019 / December 08 2019
various ID label/Location info ID Label/Location Info pdf 30.07 KiB / February 05 2019
various Label ID Label/Location Info pdf 106.18 KiB
various Label & Label Location ID Label/Location Info pdf 114.14 KiB
various Label (Module) Ver.01 ID Label/Location Info pdf 312.71 KiB January 10 2014 / February 10 2014
various Label Location (Host) ID Label/Location Info pdf 8.83 KiB March 10 2014 / September 10 2014
various Label and Label Location ID Label/Location Info pdf 1.34 MiB
various Label and Location ID Label/Location Info pdf 91.85 KiB
various Labels and Locations ID Label/Location Info pdf 1.66 MiB
various Module Label Location ID Label/Location Info pdf 8.87 KiB January 10 2014 / February 10 2014
various label location ID Label/Location Info pdf 51.19 KiB
various Authorization letter Cover Letter(s) pdf 20.15 KiB / February 05 2019
various Declaration of authorization Cover Letter(s) pdf 6.77 KiB / February 05 2019
various FCC Class II permissive change letter Cover Letter(s) pdf 34.85 KiB / February 05 2019
various RF Exposure Info pdf / February 05 2019
various RF Exposure Info pdf / February 05 2019
various RF Exposure Info pdf / February 05 2019
various confidentiality Cover Letter(s) pdf 8.89 KiB / February 05 2019
various Declaration of authorization revised Cover Letter(s) pdf 5.32 KiB
various FCC Class II permissive change letter revised Cover Letter(s) pdf 33.76 KiB
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf December 02 2019
various RF Exposure Info pdf December 02 2019
various Class II permissive change letter Cover Letter(s) pdf 34.77 KiB December 02 2019
various RF Exposure Info pdf December 02 2019
various Test Setup Photos pdf December 02 2019 / December 08 2019
various Class II Permissive Change Cover Letter(s) pdf 40.76 KiB / November 10 2018
various RF Exposure Info pdf January 10 2018 / November 10 2018
various Test Setup Photos pdf
various LTC/STC Letter Cover Letter(s) pdf 23.73 KiB
various RF Exposure Info pdf
various Test Setup Photos pdf
various Class II change Letter Cover Letter(s) pdf 32.04 KiB
various Test Setup Photos pdf
various Class 2 letter Cover Letter(s) pdf 13.03 KiB
various Test Setup Photos pdf
various Test Report pdf
various agent letter Cover Letter(s) pdf 12.63 KiB
various confidentiality letter Cover Letter(s) pdf 13.20 KiB
various Test Setup Photos pdf
various Test Setup Photos pdf
various Test Report pdf
various Agent Authorization Cover Letter(s) pdf 13.91 KiB January 05 2017
various Confidentilaity letter Cover Letter(s) pdf 14.20 KiB January 05 2017
various Permissive Change Cover Letter(s) pdf 315.45 KiB January 05 2017
various Test Setup Photos pdf January 05 2017
various Test Report pdf January 05 2017
various Test Report pdf January 05 2017
various Test Report pdf January 05 2017
various Test Report pdf January 05 2017
various Agent Authorization Letter Cover Letter(s) pdf 12.63 KiB
various Letter of Conformity Cover Letter(s) pdf 19.02 KiB
various Authority to Act as Agent Cover Letter(s) pdf 18.46 KiB
various Request for Confidentiality Cover Letter(s) pdf 20.46 KiB
various Confidentiality Letter Revised Cover Letter(s) pdf 16.81 KiB
various PC Cover Letter Version 6/13/16 Cover Letter(s) pdf 76.84 KiB
various PC Cover Letter Version 3 Cover Letter(s) pdf 87.85 KiB August 06 2016 / September 06 2016
various Permissive Change Letter Cover Letter(s) pdf 44.33 KiB
various RF Exposure Info pdf
various Test Setup Photos pdf / October 09 2016
various Permissive Change Letter Revised Cover Letter(s) pdf 126.53 KiB / December 08 2015
various RF Exposure Info pdf November 08 2015 / December 08 2015
various RF Justification Letter Cover Letter(s) pdf 25.77 KiB November 08 2015 / December 08 2015
various Test Setup Photos pdf February 06 2015 / September 12 2015
various Passive-Active Scan Attestation Attestation Statements pdf 19.19 KiB / March 11 2014
various Authority to Act as Agent-Letters Cover Letter(s) pdf 20.29 KiB March 10 2014 / September 10 2014
various FCC Class II permissive change letter(SKI Intel 7265) Cover Letter(s) pdf 44.58 KiB March 10 2014 / September 10 2014
various FCC Confidentility Letter (Ver.01) Cover Letter(s) pdf 24.06 KiB March 10 2014 / September 10 2014
various RF Exposure Info pdf March 10 2014 / September 10 2014
various Test Setup Photos pdf March 10 2014 / August 04 2015
various ACB-Form-FCC-Application-Letters(Authority) Signed Cover Letter(s) pdf 196.15 KiB January 10 2014 / February 10 2014
various ACB-Form-FCC-Application-Letters(Confidentiality) Signed Cover Letter(s) pdf 20.64 KiB January 10 2014 / February 10 2014
various FCC Auth Ltr for Change of ID ACER Cover Letter(s) pdf 25.22 KiB January 10 2014 / February 10 2014
various Quick guide Users Manual pdf 1.91 MiB
various Safety guide Users Manual pdf 1.03 MiB
various TempConfidential [STC] User Manual Users Manual pdf 41.70 KiB
various User Manual Users Manual pdf 4.78 MiB
various User Manual Safety Users Manual pdf 2.05 MiB
various User Manual Safety Guide Users Manual pdf 1.06 MiB November 08 2015 / July 02 2016
various User Manual-A715-73Grolsch KLS UM Users Manual pdf 4.25 MiB December 02 2019 / December 08 2019
various User Manual-Acer Regulatory Information and Safety Guide Users Manual pdf 1.17 MiB December 02 2019 / December 08 2019
various User Manual-Regulatory,safty guide Users Manual pdf 625.86 KiB
various User Manual Safety Guide Users Manual pdf 1.58 MiB March 10 2014 / August 04 2015
various Users Manual Users Manual pdf 2.86 MiB
various Users Manual-Acer Regulatory and Safety Guide Users Manual pdf 1.61 MiB
various Internal Photo Internal Photos pdf 3.59 MiB March 10 2014 / August 04 2015
various Internal Photos Internal Photos pdf 942.92 KiB December 02 2019 / December 08 2019
various Confidentiality Letter External Photos pdf 22.76 KiB
various External Photo External Photos pdf 518.05 KiB March 10 2014 / August 04 2015
various External Photo Ver.02 External Photos pdf 1.83 MiB March 10 2014 / August 04 2015
various External Photos External Photos pdf 621.62 KiB December 02 2019 / December 08 2019
various ID label/Location info ID Label/Location Info pdf 30.07 KiB / February 05 2019
various Label ID Label/Location Info pdf 106.18 KiB
various Label & Label Location ID Label/Location Info pdf 114.14 KiB
various Label (Module) Ver.01 ID Label/Location Info pdf 312.71 KiB January 10 2014 / February 10 2014
various Label Location (Host) ID Label/Location Info pdf 8.83 KiB March 10 2014 / September 10 2014
various Label and Label Location ID Label/Location Info pdf 1.34 MiB
various Label and Location ID Label/Location Info pdf 91.85 KiB
various Labels and Locations ID Label/Location Info pdf 1.66 MiB
various Module Label Location ID Label/Location Info pdf 8.87 KiB January 10 2014 / February 10 2014
various label location ID Label/Location Info pdf 51.19 KiB
various Authorization letter Cover Letter(s) pdf 20.15 KiB / February 05 2019
various Declaration of authorization Cover Letter(s) pdf 6.77 KiB / February 05 2019
various FCC Class II permissive change letter Cover Letter(s) pdf 34.85 KiB / February 05 2019
various confidentiality Cover Letter(s) pdf 8.89 KiB / February 05 2019
various Declaration of authorization revised Cover Letter(s) pdf 5.32 KiB
various FCC Class II permissive change letter revised Cover Letter(s) pdf 33.76 KiB
various Class II permissive change letter Cover Letter(s) pdf 34.77 KiB December 02 2019
various Class II Permissive Change Cover Letter(s) pdf 40.76 KiB / November 10 2018
various LTC/STC Letter Cover Letter(s) pdf 23.73 KiB
various Class II change Letter Cover Letter(s) pdf 32.04 KiB
various Class 2 letter Cover Letter(s) pdf 13.03 KiB
various agent letter Cover Letter(s) pdf 12.63 KiB
various confidentiality letter Cover Letter(s) pdf 13.20 KiB
various Agent Authorization Cover Letter(s) pdf 13.91 KiB January 05 2017
various Confidentilaity letter Cover Letter(s) pdf 14.20 KiB January 05 2017
various Permissive Change Cover Letter(s) pdf 315.45 KiB January 05 2017
various Agent Authorization Letter Cover Letter(s) pdf 12.63 KiB
various Letter of Conformity Cover Letter(s) pdf 19.02 KiB
various Authority to Act as Agent Cover Letter(s) pdf 18.46 KiB
various Request for Confidentiality Cover Letter(s) pdf 20.46 KiB
various Confidentiality Letter Revised Cover Letter(s) pdf 16.81 KiB
various PC Cover Letter Version 6/13/16 Cover Letter(s) pdf 76.84 KiB
various PC Cover Letter Version 3 Cover Letter(s) pdf 87.85 KiB August 06 2016 / September 06 2016
various Permissive Change Letter Cover Letter(s) pdf 44.33 KiB
various Permissive Change Letter Revised Cover Letter(s) pdf 126.53 KiB / December 08 2015
various RF Justification Letter Cover Letter(s) pdf 25.77 KiB November 08 2015 / December 08 2015
various Passive-Active Scan Attestation Attestation Statements pdf 19.19 KiB / March 11 2014
various Authority to Act as Agent-Letters Cover Letter(s) pdf 20.29 KiB March 10 2014 / September 10 2014
various FCC Class II permissive change letter(SKI Intel 7265) Cover Letter(s) pdf 44.58 KiB March 10 2014 / September 10 2014
various FCC Confidentility Letter (Ver.01) Cover Letter(s) pdf 24.06 KiB March 10 2014 / September 10 2014
various ACB-Form-FCC-Application-Letters(Authority) Signed Cover Letter(s) pdf 196.15 KiB January 10 2014 / February 10 2014
various ACB-Form-FCC-Application-Letters(Confidentiality) Signed Cover Letter(s) pdf 20.64 KiB January 10 2014 / February 10 2014
various FCC Auth Ltr for Change of ID ACER Cover Letter(s) pdf 25.22 KiB January 10 2014 / February 10 2014

frequency equipment class purpose
1 2019-05-02 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II permissive change or modification of presently authorized equipment
2 2422 ~ 2452 DTS - Digital Transmission System
3 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
4 2019-04-26 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
5 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
6 2402 ~ 2480 DTS - Digital Transmission System
7 2019-02-13 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
8 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
9 2412 ~ 2462 DTS - Digital Transmission System
10 2018-10-11 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
11 2422 ~ 2452 DTS - Digital Transmission System
12 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
13 2018-04-25 2422 ~ 2452 DTS - Digital Transmission System
14 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
15 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
16 2018-04-18 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
17 2422 ~ 2452 DTS - Digital Transmission System
18 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
19 2018-03-23 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
20 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
21 2422 ~ 2452 DTS - Digital Transmission System
22 2018-03-13 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
23 2422 ~ 2452 DTS - Digital Transmission System
24 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
25 2017-11-29 5755 ~ 5795 DTS - Digital Transmission System
26 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
27 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
28 2017-09-15 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
29 5755 ~ 5795 DTS - Digital Transmission System
30 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
31 2017-05-01 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
32 5755 ~ 5795 DTS - Digital Transmission System
33 2017-04-26 5755 ~ 5795 DTS - Digital Transmission System
34 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
35 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
36 2017-04-20 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
37 2016-06-13 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
38 2016-06-09 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
39 2016-03-14 5755 ~ 5795 DTS - Digital Transmission System
40 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
41 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
42 2015-08-12 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
43 5755 ~ 5795 DTS - Digital Transmission System
44 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
45 2015-06-12 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
46 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
47 5755 ~ 5795 DTS - Digital Transmission System
48 2014-11-03 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
49 5755 ~ 5795 DTS - Digital Transmission System
50 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
51 2014-10-14 5755 ~ 5795 DTS - Digital Transmission System
52 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
53 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
54 2014-10-09 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
55 5755 ~ 5795 DTS - Digital Transmission System
56 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
57 2014-10-02 5755 ~ 5795 DTS - Digital Transmission System Change in identification of presently authorized equipment. Original FCC ID: PD97265NG Grant Date: 03/21/2014
58 JBP - Part 15 Class B Computing Device Peripheral
59 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
60 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter

Application Forms

app s Applicant Information
various Effective 2019-05-02
various 2019-04-26
various 2019-02-13
various 2018-10-11
various 2018-04-25
various 2018-04-18
various 2018-03-23
various 2018-03-13
various 2017-11-29
various 2017-09-15
various 2017-05-01
various 2017-04-26
various 2017-04-20
various 2016-06-13
various 2016-06-09
various 2016-03-14
various 2015-08-12
various 2015-06-12
various 2014-11-03
various 2014-10-14
various 2014-10-09
various 2014-10-02
various Applicant's complete, legal business name Acer Incorporated
various FCC Registration Number (FRN) 0013355508
various Physical Address 8F, 88, Sec 1, Hsin Tai Wu Rd
various Hsichih, Taipei Hsien, 221
various Taiwan
app s TCB Information
various TCB Application Email Address c******@telefication.com
various t******@siemic.com
various u******@sgs.com
various h******@acbcert.com
various H******@acbcert.com
various H******@acbcert.coms
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code HLZ
various Equipment Product Code 7265NG
app s Person at the applicant's address to receive grant or for contact
various Name H**** S******** L****
various Title Manager
various Telephone Number 886-2******** Extension:
various Fax Number 886-2********
various E-mail H******@acer.com.tw
app s Technical Contact
various Firm Name SGS Taiwan Ltd
various SGS Taiwan Ltd.
various SGS Tawian Ltd
various SGS
various SGS-CSTC
various Name J****** C****
various W****** C****
various W******** C****
various Physical Address 134, Wu Kung Road, WuKu Industrial Zone
various 134, Wu KungRoad, WuKu Industrial Zone
various 134,Wu Kung Road,WuKu Industrial Zone
various No. 134, Wu Kung Rd., New Taipei Industrial Park
various No. 134, Wu Kung Road
various 134, Wu Kung Road, New Taipei Industrial Park
various 134 Wu Kung Rd. New Taipei Industrial Pk.
various 134 Wu Kung Rd.
various 134, Wu Kung Rd., Wuku Industrail Zone
various New Taipei City, 24803
various Taiwan
various Telephone Number 886 2********
various 886-2********
various 88622******** Extension:
various +886 ******** Extension:
various +886 ********
various 886 2********
various 88********
various 886 2******** Extension:
various 88622******** Extension:
various 88622********
various Fax Number 886 2********
various 886-2********
various 88622********
various 886 2********
various 88********
various 886 2********
various 88622********
various E-mail J******@sgs.com
various j******@sgs.com
various w******@sgs.com
various w******@sgs.com
app s Non Technical Contact
various Firm Name SGS Taiwan Ltd
various SGS Taiwan Ltd.
various Acer Incorporated
various Name J******** C******
various W******** C****
various H**** L********
various Physical Address 134, Wu Kung Road, WuKu Industrial Zone
various 134, Wu KungRoad, WuKu Industrial Zone
various 134,Wu Kung Road,WuKu Industrial Zone
various No. 134, Wu Kung Rd., New Taipei Industrial Park
various No. 134, Wu Kung Road
various 8F,88, Sec. 1, Hsin Tai Wu Rd. Hsichih Taipei Hsie
various New Taipei City, 24803
various Hsien, Taipei Hsien, 221
various Taiwan
various Telephone Number 886 2********
various 886-2********
various 88622******** Extension:
various +886 ******** Extension:
various +886 ********
various 886 2********
various +886-********
various Fax Number 886 2********
various 886-2********
various 88622********
various 886 2********
various 886********
various E-mail J******@sgs.com
various j******@sgs.com
various w******@sgs.com
various H******@acer.com.tw
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)10/24/2019
various10/21/2019
various08/12/2019
various03/30/2019
various10/23/2018
various10/16/2018
various09/20/2018
various09/10/2018
various05/28/2018
various03/14/2018
various10/27/2017
various10/28/2017
various10/23/2017
various10/17/2017
various09/10/2016
various02/07/2016
various12/09/2015
various04/28/2015
various04/12/2015
various04/08/2015
various03/31/2015
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassDSS - Part 15 Spread Spectrum Transmitter
variousDTS - Digital Transmission System
variousNII - Unlicensed National Information Infrastructure TX
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)7265NGW
variousHLZ7265NG
various7265NG
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousModular Equipment TypeSingle Modular Approval
variousDoes not apply
variousPurpose / Application is forClass II permissive change or modification of presently authorized equipment
variousChange in identification of presently authorized equipment. Original FCC ID: PD97265NG Grant Date: 03/21/2014
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsClass II Permissive Change: To incorporates approved Module into the dedicated host of the laptop platform as described in this filing (acer/Model: N18Q10). The highest reported SAR for body, and simultaneous transmission use conditions are: <0.1W/kg, and 0.55 W/kg, respectively. Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co­located with any other transmitters except in accordance with FCC multi­transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End­users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Simultaneous SAR is 1.55 W/kg.
variousClass II Permissive Change: To incorporates approved Module into the dedicated host of the laptop platform as described in this filing (acer/Model: N18Q10). The highest reported SAR for body, and simultaneous transmission use conditions are: 0.29 W/kg, and 0.56 W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co­located with any other transmitters, except in accordance with FCC multi­transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
variousClass II Permissive Change: To incorporates approved Module into the dedicated host of the laptop platform as described in this filing (acer/Model: N18Q10). The highest reported SAR for body, and simultaneous transmission use conditions are: 0.56 W/kg, and 1.06 W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
variousClass II Permissive Change: To incorporates approved Module into the dedicated host of the laptop platform as described in this filing (acer/Model: N18Q11). The highest reported SAR for body, and simultaneous transmission use conditions are: <0.1W/kg, and 0.43W/kg, respectively Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co­located with any other transmitters except in accordance with FCC multi­transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End­users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
variousClass II Permissive Change: To incorporates approved Module into the dedicated host of the laptop platform as described in this filing (acer/Model: N18Q11). The highest reported SAR for body, and simultaneous transmission use conditions are: 0.47 W/kg, and 0.89 W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
variousClass II Permissive Change: To incorporates approved Module into the dedicated host of the laptop platform as described in this filing (acer/Model: N18Q11). The highest reported SAR for body, and simultaneous transmission use conditions are: 0.26 W/kg, and 0.49 W/kg, respectively Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co­located with any other transmitters, except in accordance with FCC multi­transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
variousClass II Permissive Change: To incorporates this Module into the dedicated host of the laptop plateform as described in this filing (acer/Model: N18P3). The highest reported SAR for body, and simultaneous transmission use conidtion are: 0.50 W/kg, and 0.87 W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured Body and Simultaneous SAR values are 0.79W/kg. Simultaneous TX: 1.55W/kg respectively. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power.
variousClass II Permissive Change: To incorporates this Module into the dedicated host of the laptop plateform as described in this filing (acer/Model: N18P3). The highest reported SAR for body, and simultaneous transmission use conidtion are: <0.10 W/kg, and 0.38W/kg, respectively. Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co­located with any other transmitters except in accordance with FCC multi­transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End­users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Simultaneous SAR is 1.55 W/kg.
variousClass II Permissive Change: To incorporates this Module into the dedicated host of the laptop plateform as described in this filing (acer/Model: N18P3). The highest reported SAR for body, and simultaneous transmission use conidtion are: 0.37 W/kg, and 0.64 W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co­located with any other transmitters, except in accordance with FCC multi­transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value is: 0.55 W/kg. Simultaneous TX: 1.55W/kg.
variousClass II Permissive Change: To incorporates this Module into the dedicated host of the laptop plateform as described in this filing (acer/Model: N18Q3). The highest reported SAR for body, and simultaneous transmission use conidtion are: 0.53W/kg, and 0.98W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured Body and Simultaneous SAR values are 0.79W/kg. Simultaneous TX: 1.55W/kg respectively. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power.
variousClass II Permissive Change: To incorporates this Module into the dedicated host of the laptop plateform as described in this filing (acer/Model: N18Q3). The highest reported SAR for body, and simultaneous transmission use conidtion are: 0.22W/kg, and 0.38W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co­located with any other transmitters, except in accordance with FCC multi­transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value is: 0.55 W/kg. Simultaneous TX: 1.55W/kg.
variousClass II Permissive Change: To incorporates this Module into the dedicated host of the laptop plateform as described in this filing (acer/Model: N18Q3). The highest reported SAR for body, and simultaneous transmission use conidtion are: <0.10W/kg, and 0.46W/kg, respectively Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co­located with any other transmitters except in accordance with FCC multi­transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End­users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Simultaneous SAR is 1.55 W/kg.
variousCIIPC to add Acer Notebook Computer model N17Q9. The highest reported SAR for body and simultaneous transmission mode are 0.51W/kg, and 0.89W/kg. Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co­located with any other transmitters, except in accordance with FCC multi­transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value is: 0.55 W/kg. Simultaneous TX: 1.55W/kg.
variousCIIPC to add Acer Notebook Computer model N17Q9. The highest reported SAR for body and simultaneous transmission mode are 0.80W/kg, and 1.54W/kg. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured Body and Simultaneous SAR values are 0.79W/kg. Simultaneous TX: 1.55W/kg respectively. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power.
variousCIIPC to add Acer Notebook Computer model N17Q9. The highest reported SAR for body and simultaneous transmission mode are <0.10W/kg, and 0.83W/kg. Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co¬located with any other transmitters except in accordance with FCC multi¬transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End¬users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Simultaneous SAR is 1.55 W/kg.
variousCIIPC to add Acer Notebook Computer model N17P6. The highest reported SAR for body and simultaneous transmission mode are 0.50W/kg, and 0.88W/kg. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured Body and Simultaneous SAR values are 0.79W/kg. Simultaneous TX: 1.55W/kg respectively. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power.
variousCIIPC to add Acer Notebook Computer model N17P6. The highest reported SAR for body and simultaneous transmission mode are 0.39W/kg, and 0.71W/kg. Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co­located with any other transmitters, except in accordance with FCC multi­transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value is: 0.55 W/kg. Simultaneous TX: 1.55W/kg.
variousCIIPC to add Acer Notebook Computer model N17P6. The highest reported SAR for body and simultaneous transmission mode are <0.10W/kg, and 0.38W/kg. Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co¬located with any other transmitters except in accordance with FCC multi¬transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End¬users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Simultaneous SAR is 1.55 W/kg.
variousCIIPC to add Acer Notebook Computer model N17W7. The highest reported SAR for body and simultaneous transmission mode are 0.77W/kg, and 1.46W/kg. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured Body and Simultaneous SAR values are 0.79W/kg. Simultaneous TX: 1.55W/kg respectively. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power.
variousCIIPC to add Acer Notebook Computer model N17W7. The highest reported SAR for body and simultaneous transmission mode are <0.10W/kg, and 0.70W/kg. Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co¬located with any other transmitters except in accordance with FCC multi¬transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End¬users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Simultaneous SAR is 1.55 W/kg
variousCIIPC to add Acer Notebook Computer model N17W7. The highest reported SAR for body and simultaneous transmission mode are 0.27W/kg, and 0.46W/kg. Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co­located with any other transmitters, except in accordance with FCC multi­transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value is: 0.55 W/kg. Simultaneous TX: 1.55W/kg.
variousCIIPC to add Acer Notebook Computer model N17Q8. The highest reported SAR for body and simultaneous transmission mode are <0.10W/kg, and 0.89W/kg. Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co¬located with any other transmitters except in accordance with FCC multi¬transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End¬users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Simultaneous SAR is 1.55 W/kg.
variousCIIPC to add Acer Notebook Computer model N17Q8. The highest reported SAR for body and simultaneous transmission mode are 0.35W/kg, and 0.59W/kg. Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co­located with any other transmitters, except in accordance with FCC multi­transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value is: 0.55 W/kg. Simultaneous TX: 1.55W/kg.
variousCIIPC to add Acer Notebook Computer model N17Q8. The highest reported SAR for body and simultaneous transmission mode are 0.87W/kg, and 1.46W/kg. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured Body and Simultaneous SAR values are 0.79W/kg. Simultaneous TX: 1.55W/kg respectively. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co¬-located with any other transmitters except in accordance with FCC multi¬-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End ¬users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported body SAR value is: 0.34 W/kg. Simultaneous TX: 0.62W/kg. This change is for module being used in different host (Portable category configuration, Host Acer/Model: N17W3. SAR Testing has been performed to demonstrate RF Compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported body SAR value is 0.55W/kg. Simultaneous TX: 1.01W/kg respectively. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power. This change is for module being used in different host (Portable category configuration, Host Acer/Model: N17W3. SAR Testing has been performed to demonstrate RF Compliance.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported body SAR value is: 0.02 W/kg. Simultaneous TX: 0.56W/kg. This change is for module being used in different host (Portable category configuration), Host Acer/Model: N17W3. SAR Testing has been performed to demonstrate RF Compliance.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported body SAR value is: 0.02 W/kg. Simultaneous TX: 0.27W/kg. This change is for module being used in different host (Portable category configuration), Host Acer/Model: N17Q5. SAR Testing has been performed to demonstrate RF Compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported body SAR value is: 0.24 W/kg. Simultaneous TX: 0.47W/kg. This change is for module being used in different host (Portable category configuration), Host Acer/Model: N17Q5. SAR Testing has been performed to demonstrate RF Compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported body SAR value is 0.54W/kg. Simultaneous TX: 0.73W/kg respectively. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power. This change is for module being used in different host (Portable category configuration), Host Acer/Model: N17Q5. SAR Testing has been performed to demonstrate RF Compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body SAR value is 1.10W/kg. Simultaneous TX: 1.12W/kg . This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power. This change is for module being used in different host (Portable category configuration), Host Acer/Model: N16Q15. SAR Testing has been performed to demonstrate RF Compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-¬located with any other transmitters, except in accordance with FCC multi-¬transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported body SAR value is: 0.38 W/kg. Simultaneous TX: 0.66W/kg. This change is for module being used in different host (Portable category configuration), Host Acer/Model: N16Q15. SAR Testing has been performed to demonstrate RF Compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-Located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported body SAR value is: 0.38 W/kg. Simultaneous TX: 0.74W/kg. This change is for module being used in different host (Portable category configuration, Host Acer/Model: N16Q14. SAR Testing has been performed to demonstrate RF Compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body SAR value is 0.76W/kg. Simultaneous TX: 1.36W/kg. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power. This change is for module being used in different host (Portable category configuration, Host Acer/Model: N16Q14. SAR Testing has been performed to demonstrate RF Compliance.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported body SAR value is: 0.02 W/kg. Simultaneous TX: 0.63W/kg. This change is for module being used in different host (Portable category configuration, Host Acer/Model: N16Q14. SAR Testing has been performed to demonstrate RF Compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured Body and Simultaneous SAR values are 0.79W/kg. Simultaneous TX: 1.55W/kg respectively. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be used except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR values is 0.65W/kg. This change is for module being used in different host (Portable category configuration, Host Acer/Model: N15Q8. SAR Testing has been performed to demonstrate RF Compliance This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10 dBi with no changes to hardware or output power.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR values is 0.96W/kg. This change is for module being used in different host (Portable category configuration), Host Acer, Model: N16P1. SAR Testing has been performed to demonstrate RF Compliance. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10 dBi with no changes to hardware or output power.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 2.4 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR values is 0.40 W/kg. This change is for module being used in different host (Portable category configuration), Host Acer, Model: N16P1. SAR Testing has been performed to demonstrate RF Compliance.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported body SAR is 0.17 W/kg. This change is for module being used in different host (Portable category configuration), Host Acer, Model: N16P1. SAR Testing has been performed to demonstrate RF Compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz and 5.47-5.725 GHz bands. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR values is 0.96W/kg. This change is for module being used in different host (Portable category configuration), Host Acer, Model: N16P1. SAR Testing has been performed to demonstrate RF Compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be used except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz and 5.47-5.725 GHz bands. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR values is 0.65W/kg. This change is for module being used in different host (Portable category configuration, Host Acer/Model: N15Q8. SAR Testing has been performed to demonstrate RF Compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be used except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 2.4 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR values is 0.46 W/kg. This change is for module being used in different host (Portable category configuration, Host Acer/Model: N15Q8. SAR Testing has been performed to demonstrate RF Compliance.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported body SAR is 0.65 W/kg. This change is for module being used in different host (Portable category configuration, Host Acer/Model: N15Q8. SAR Testing has been performed to demonstrate RF Compliance.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The subject approved module is being used in different host Portable category Configuration, SW5-173/Model:N15C3. SAR Testing is performed to demonstrate RF Compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be used except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value is: 1.55 W/kg. The subject approved module is being used in different host Portable category Configuration, SW5-173/Model:N15C3. SAR Testing is performed to demonstrate RF Compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be used except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value is: 1.04 W/kg. The subject approved module is being used in different host Portable category Configuration, SW5-173/Model:N15C3. SAR Testing is performed to demonstrate RF Compliance.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported body and simultaneous SAR is 0.22 W/kg and 1.56W/kg respectively. This change is for module being used in different host (Portable category Configuration, Host Acer/Model: MS2398). SAR Testing has been performed to demonstrate RF Compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body and simultaneous SAR values is: 1.14 W/kg and 1.56W/kg respectively. This change is for module being used in different host (Portable category Configuration, Host Acer/Model: MS2398). SAR Testing has been performed to demonstrate RF Compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.155.25GHz and 5.475.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body and simultaneous SAR values is: 1.54 W/kg and 1.56W/kg respectively. This change is for module being used in different host (Portable category Configuration, Host Acer/Model: MS2398). SAR Testing has been performed to demonstrate RF Compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body and simultaneous SAR values is: 0.85 W/kg and 1.37W/kg respectively. This change is for module being used in different host (Portable category Configuration, Host Acer/Model: SW5-171, SW5-171P). SAR Testing has been performed to demonstrate RF Compliance.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported body and simultaneous SAR is 0.17 W/kg and 1.37W/kg respectively. This change is for module being used in different host (Portable category Configuration, Host Acer/Model: SW5-171, SW5-171P). SAR Testing has been performed to demonstrate RF Compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.155.25GHz and 5.475.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body and simultaneous SAR values is: 1.46 W/kg and 1.37W/kg respectively. This change is for module being used in different host (Portable category Configuration, Host Acer/Model: SW5-171, SW5-171P). SAR Testing has been performed to demonstrate RF Compliance.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be colocated with any other transmitters except in accordance with FCC multitransmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Endusers and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Simultaneous SAR is 1.55 W/kg. This change is to request approval for portable category host PC, model number: ZS8 (acer Aspire R 13, R7-371T and R7-372T), with the specific antennas used as documented in this filing.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be colocated with any other transmitters, except in accordance with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value is: 0.55 W/kg. Simultaneous TX: 1.55W/kg. This change is to request approval for portable category host PC, model number: ZS8 (acer Aspire R 13, R7-371T and R7-372T), with the specific antennas used as documented in this filing. The highest reported SAR for stand-alone transmission is 1.08 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be colocated with any other transmitters, except in accordance with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.155.25GHz and 5.475.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value is: 0.79W/kg. Simultaneous TX: 1.55W/kg. This change is to request approval for portable category host PC, model number: ZS8 (acer Aspire R 13, R7-371T and R7-372T), with the specific antennas used as documented in this filing. The highest reported SAR for stand-alone transmission is 1.49 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co­located with any other transmitters, except in accordance with FCC multi­transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value is: 0.55 W/kg. Simultaneous TX: 1.55W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co­located with any other transmitters, except in accordance with FCC multi­transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15­5.25GHz and 5.47­5.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value is: 0.79W/kg. Simultaneous TX: 1.55W/kg.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co­located with any other transmitters except in accordance with FCC multi­transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End­users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Simultaneous SAR is 1.55 W/kg.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name SGS Taiwan Ltd. Electronics & Communication Lab
various SGS Taiwan Ltd.
various SGS TAIWAN LTD.
various Name W**** C********
various R****** W********
various R******** W********
various N**** B********
various J**** L****
various Telephone Number +886-******** Extension:
various +886-******** Extension:
various +886-******** Extension:
various 886-2******** Extension:
various 886-2******** Extension:
various Fax Number +886-********
various +886-********
various 886-2********
various 886 2********
various E-mail w******@sgs.com
various r******@sgs.com
various R******@sgs.com
various n******@sgs.com
various j******@sgs.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402 2480 0.002
2 2 15C CC MO 2412 2462 0.104
2 3 15C CC MO 2422 2452 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15E CC MO 5180 5240 0.028
3 2 15E CC MO 5190 5230 0.044
3 3 15E CC MO ND 5260 5320 0.047
3 4 15E CC MO ND 5270 5310 0.092
3 5 15E CC MO ND 5500 5700 0.058
3 6 15E CC MO ND 5510 5670 0.047
3 7 15E CC MO ND 5720 5720 0.044
3 8 15E CC MO ND 5710 5710 0.044
3 9 15E CC MO ND 5530 5690 0.091
3 1 15E CC MO 5745 5825 0.045
3 11 15E CC MO 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15E CC MO 5180 5240 0.028
5 2 15E CC MO 5190 5230 0.044
5 3 15E CC MO ND 5260 5320 0.047
5 4 15E CC MO ND 5270 5310 0.092
5 5 15E CC MO ND 5500 5700 0.058
5 6 15E CC MO ND 5510 5670 0.047
5 7 15E CC MO ND 5720 5720 0.044
5 8 15E CC MO ND 5710 5710 0.044
5 9 15E CC MO ND 5530 5690 0.091
5 1 15E CC MO 5745 5825 0.045
5 11 15E CC MO 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2402 2480 0.002
6 2 15C CC MO 2412 2462 0.104
6 3 15C CC MO 2422 2452 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15E CC MO 5180 5240 0.028
7 2 15E CC MO 5190 5230 0.044
7 3 15E CC MO ND 5260 5320 0.047
7 4 15E CC MO ND 5270 5310 0.092
7 5 15E CC MO ND 5500 5700 0.058
7 6 15E CC MO ND 5510 5670 0.047
7 7 15E CC MO ND 5720 5720 0.044
7 8 15E CC MO ND 5710 5710 0.044
7 9 15E CC MO ND 5530 5690 0.091
7 1 15E CC MO 5745 5825 0.045
7 11 15E CC MO 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15C CC 2402 2480 0.002
9 2 15C CC MO 2412 2462 0.104
9 3 15C CC MO 2422 2452 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15E 38 CC MO 5180 5240 0.028
10 2 15E 38 CC MO 5190 5230 0.044
10 3 15E 38 CC MO ND 5260 5320 0.047
10 4 15E 38 CC MO ND 5270 5310 0.092
10 5 15E 38 CC MO ND 5500 5700 0.058
10 6 15E 38 CC MO ND 5510 5670 0.047
10 7 15E 38 CC MO ND 5720 5720 0.044
10 8 15E 38 CC MO ND 5710 5710 0.044
10 9 15E 38 CC MO ND 5530 5690 0.091
10 1 15E 49 CC MO 5745 5825 0.045
10 11 15E 49 CC MO 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15C CC 2402 2480 0.002
11 2 15C CC MO 2412 2462 0.104
11 3 15C CC MO 2422 2452 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15C CC 2402 2480 0.002
13 2 15C CC MO 2412 2462 0.104
13 3 15C CC MO 2422 2452 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15E 38 CC MO 5180 5240 0.028
14 2 15E 38 CC MO 5190 5230 0.044
14 3 15E 38 CC MO ND 5260 5320 0.047
14 4 15E 38 CC MO ND 5270 5310 0.092
14 5 15E 38 CC MO ND 5500 5700 0.058
14 6 15E 38 CC MO ND 5510 5670 0.047
14 7 15E 38 CC MO ND 5720 5720 0.044
14 8 15E 38 CC MO ND 5710 5710 0.044
14 9 15E 38 CC MO ND 5530 5690 0.091
14 1 15E 49 CC MO ND 5745 5825 0.045
14 11 15E 49 CC MO ND 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15E 38 CC MO 5180 5240 0.028
16 2 15E 38 CC MO 5190 5230 0.044
16 3 15E 38 CC MO ND 5260 5320 0.047
16 4 15E 38 CC MO ND 5270 5310 0.092
16 5 15E 38 CC MO ND 5500 5700 0.058
16 6 15E 38 CC MO ND 5510 5670 0.047
16 7 15E 38 CC MO ND 5720 5720 0.044
16 8 15E 38 CC MO ND 5710 5710 0.044
16 9 15E 38 CC MO ND 5530 5690 0.091
16 1 15E 49 CC MO ND 5745 5825 0.045
16 11 15E 49 CC MO ND 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15C CC 2402 2480 0.002
17 2 15C CC MO 2412 2462 0.104
17 3 15C CC MO 2422 2452 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
18 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
19 1 15E 38 CC MO 5180 5240 0.028
19 2 15E 38 CC MO 5190 5230 0.044
19 3 15E 38 CC MO ND 5260 5320 0.047
19 4 15E 38 CC MO ND 5270 5310 0.092
19 5 15E 38 CC MO ND 5500 5700 0.058
19 6 15E 38 CC MO ND 5510 5670 0.047
19 7 15E 38 CC MO ND 5720 5720 0.044
19 8 15E 38 CC MO ND 5710 5710 0.044
19 9 15E 38 CC MO ND 5530 5690 0.091
19 1 15E 49 CC MO ND 5745 5825 0.045
19 11 15E 49 CC MO ND 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
20 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
21 1 15C CC 2402 2480 0.002
21 2 15C CC MO 2412 2462 0.104
21 3 15C CC MO 2422 2452 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
22 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
23 1 15C CC 2402 2480 0.002
23 2 15C CC MO 2412 2462 0.104
23 3 15C CC MO 2422 2452 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
24 1 15E 38 CC MO 5180 5240 0.028
24 2 15E 38 CC MO 5190 5230 0.044
24 3 15E 38 CC MO ND 5260 5320 0.047
24 4 15E 38 CC MO ND 5270 5310 0.092
24 5 15E 38 CC MO ND 5500 5700 0.058
24 6 15E 38 CC MO ND 5510 5670 0.047
24 7 15E 38 CC MO ND 5720 5720 0.044
24 8 15E 38 CC MO ND 5710 5710 0.044
24 9 15E 38 CC MO ND 5530 5690 0.091
24 1 15E 49 CC MO ND 5745 5825 0.045
24 11 15E 49 CC MO ND 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
25 1 15C CC 2402 2480 0.002
25 2 15C CC MO 2412 2462 0.104
25 3 15C CC MO 2422 2452 0.054
25 4 15C CC MO 5745 5825 0.045
25 5 15C CC MO 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
26 1 15E CC MO 5180 5240 0.028
26 2 15E CC MO 5190 5230 0.044
26 3 15E CC MO ND 5260 5320 0.047
26 4 15E CC MO ND 5270 5310 0.092
26 5 15E CC MO ND 5500 5700 0.058
26 6 15E CC MO ND 5510 5670 0.047
26 7 15E CC MO ND 5720 5720 0.044
26 8 15E CC MO ND 5710 5710 0.044
26 9 15E CC MO ND 5530 5690 0.091
26 1 15E CC MO ND 5745 5825 0.045
26 11 15E CC MO ND 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
27 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
28 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
29 1 15C CC 2402 2480 0.002
29 2 15C CC MO 2412 2462 0.104
29 3 15C CC MO 2422 2452 0.054
29 4 15C CC MO 5745 5825 0.045
29 5 15C CC MO 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
30 1 15E 38 CC MO 5180 5240 0.028
30 2 15E 38 CC MO 5190 5230 0.044
30 3 15E 38 CC MO ND 5260 5320 0.047
30 4 15E 38 CC MO ND 5270 5310 0.092
30 5 15E 38 CC MO ND 5500 5700 0.058
30 6 15E 38 CC MO ND 5510 5670 0.047
30 7 15E 38 CC MO ND 5720 5720 0.044
30 8 15E 38 CC MO ND 5710 5710 0.044
30 9 15E 38 CC MO ND 5530 5690 0.091
30 1 15E 49 CC MO ND 5745 5825 0.045
30 11 15E 49 CC MO ND 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
31 1 15E 38 CC MO 5180 5240 0.028
31 2 15E 38 CC MO 5190 5230 0.044
31 3 15E 38 CC MO ND 5260 5320 0.047
31 4 15E 38 CC MO ND 5270 5310 0.092
31 5 15E 38 CC MO ND 5500 5700 0.058
31 6 15E 38 CC MO ND 5510 5670 0.047
31 7 15E 38 CC MO ND 5720 5720 0.044
31 8 15E 38 CC MO ND 5710 5710 0.044
31 9 15E 38 CC MO ND 5530 5690 0.091
31 1 15E 49 CC MO ND 5745 5825 0.045
31 11 15E 49 CC MO ND 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
32 1 15C CC 2402 2480 0.002
32 2 15C CC MO 2412 2462 0.104
32 3 15C CC MO 2422 2452 0.054
32 4 15C CC MO 5745 5825 0.045
32 5 15C CC MO 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
33 1 15C CC 2402 2480 0.002
33 2 15C CC MO 2412 2462 0.104
33 3 15C CC MO 2422 2452 0.054
33 4 15C CC MO 5745 5825 0.045
33 5 15C CC MO 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
34 1 15E 38 CC MO 5180 5240 0.028
34 2 15E 38 CC MO 5190 5230 0.044
34 3 15E 38 CC MO ND 5260 5320 0.047
34 4 15E 38 CC MO ND 5270 5310 0.092
34 5 15E 38 CC MO ND 5500 5700 0.058
34 6 15E 38 CC MO ND 5510 5670 0.047
34 7 15E 38 CC MO ND 5720 5720 0.044
34 8 15E 38 CC MO ND 5710 5710 0.044
34 9 15E 38 CC MO ND 5530 5690 0.091
34 1 15E 49 CC MO ND 5745 5825 0.045
34 11 15E 49 CC MO ND 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
35 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
36 1 15E 38 CC MO 5180 5240 0.028
36 2 15E 38 CC MO 5190 5230 0.044
36 3 15E 38 CC MO ND 5260 5320 0.047
36 4 15E 38 CC MO ND 5270 5310 0.092
36 5 15E 38 CC MO ND 5500 5700 0.058
36 6 15E 38 CC MO ND 5510 5670 0.047
36 7 15E 38 CC MO ND 5720 5720 0.044
36 8 15E 38 CC MO ND 5710 5710 0.044
36 9 15E 38 CC MO ND 5530 5690 0.091
36 1 15E 49 CC MO ND 5745 5825 0.045
36 11 15E 49 CC MO ND 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
37 1 15E 38 CC MO 5180 5240 0.028
37 2 15E 38 CC MO 5190 5230 0.044
37 3 15E 38 CC MO ND 5260 5320 0.047
37 4 15E 38 CC MO ND 5270 5310 0.092
37 5 15E 38 CC MO ND 5500 5700 0.058
37 6 15E 38 CC MO ND 5510 5670 0.047
37 7 15E 38 CC MO ND 5720 5720 0.044
37 8 15E 38 CC MO ND 5710 5710 0.044
37 9 15E 38 CC MO ND 5530 5690 0.091
37 1 15E 49 CC MO 5745 5825 0.045
37 11 15E 49 CC MO 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
38 1 15E 38 CC MO 5180 5240 0.028
38 2 15E 38 CC MO 5190 5230 0.044
38 3 15E 38 CC MO ND 5260 5320 0.047
38 4 15E 38 CC MO ND 5270 5310 0.092
38 5 15E 38 CC MO ND 5500 5700 0.058
38 6 15E 38 CC MO ND 5510 5670 0.047
38 7 15E 38 CC MO ND 5720 5720 0.044
38 8 15E 38 CC MO ND 5710 5710 0.044
38 9 15E 38 CC MO ND 5530 5690 0.091
38 1 15E 49 CC MO 5745 5825 0.045
38 11 15E 49 CC MO 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
39 1 15C CC 2402 2480 0.002
39 2 15C CC MO 2412 2462 0.104
39 3 15C CC MO 2422 2452 0.054
39 4 15C CC MO 5745 5825 0.045
39 5 15C CC MO 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
40 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
41 1 15E CC MO 5180 5240 0.028
41 2 15E CC MO 5190 5230 0.044
41 3 15E CC MO ND 5260 5320 0.047
41 4 15E CC MO ND 5270 5310 0.092
41 5 15E CC MO ND 5500 5700 0.058
41 6 15E CC MO ND 5510 5670 0.047
41 7 15E CC MO ND 5720 5720 0.044
41 8 15E CC MO ND 5710 5710 0.044
41 9 15E CC MO ND 5530 5690 0.091
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
42 1 15E CC MO 5180 5240 0.028
42 2 15E CC MO 5190 5230 0.044
42 3 15E CC MO ND 5260 5320 0.047
42 4 15E CC MO ND 5270 5310 0.092
42 5 15E CC MO ND 5500 5700 0.058
42 6 15E CC MO ND 5510 5670 0.047
42 7 15E CC MO ND 5720 5720 0.044
42 8 15E CC MO ND 5710 5710 0.044
42 9 15E CC MO ND 5530 5690 0.091
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
43 1 15C CC 2402 2480 0.002
43 2 15C CC MO 2412 2462 0.104
43 3 15C CC MO 2422 2452 0.054
43 4 15C CC MO 5745 5825 0.045
43 5 15C CC MO 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
44 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
45 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
46 1 15E CC MO 5180 5240 0.028
46 2 15E CC MO 5190 5230 0.044
46 3 15E CC MO ND 5260 5320 0.047
46 4 15E CC MO ND 5270 5310 0.092
46 5 15E CC MO ND 5500 5700 0.058
46 6 15E CC MO ND 5510 5670 0.047
46 7 15E CC MO ND 5720 5720 0.044
46 8 15E CC MO ND 5710 5710 0.044
46 9 15E CC MO ND 5530 5690 0.091
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
47 1 15C CC 2402 2480 0.002
47 2 15C CC MO 2412 2462 0.104
47 3 15C CC MO 2422 2452 0.054
47 4 15C CC MO 5745 5825 0.045
47 5 15C CC MO 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
48 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
49 1 15C CC 2402 2480 0.002
49 2 15C CC MO 2412 2462 0.104
49 3 15C CC MO 2422 2452 0.054
49 4 15C CC MO 5745 5825 0.045
49 5 15C CC MO 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
50 1 15E CC MO 5180 5240 0.028
50 2 15E CC MO 5190 5230 0.05
50 3 15E CC MO ND 5260 5320 0.047
50 4 15E CC MO ND 5270 5310 0.092
50 5 15E CC MO ND 5500 5700 0.058
50 6 15E CC MO ND 5510 5670 0.047
50 7 15E CC MO ND 5720 5720 0.044
50 8 15E CC MO ND 5710 5710 0.09
50 9 15E CC MO ND 5530 5690 0.091
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
51 1 15C CC 2402 2480 0.002
51 2 15C CC MO 2412 2462 0.104
51 3 15C CC MO 2422 2452 0.054
51 4 15C CC MO 5745 5825 0.045
51 5 15C CC MO 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
52 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
53 1 15E CC MO 5180 5240 0.028
53 2 15E CC MO 5190 5230 0.044
53 3 15E CC MO ND 5260 5320 0.047
53 4 15E CC MO ND 5270 5310 0.092
53 5 15E CC MO ND 5500 5700 0.058
53 6 15E CC MO ND 5510 5670 0.047
53 7 15E CC MO ND 5720 5720 0.044
53 8 15E CC MO ND 5710 5710 0.044
53 9 15E CC MO ND 5530 5690 0.091
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
54 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
55 1 15C CC 2402 2480 0.002
55 2 15C CC MO 2412 2462 0.104
55 3 15C CC MO 2422 2452 0.054
55 4 15C CC MO 5745 5825 0.045
55 5 15C CC MO 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
56 1 15E CC MO 5180 5240 0.028
56 2 15E CC MO 5190 5230 0.044
56 3 15E CC MO ND 5260 5320 0.047
56 4 15E CC MO ND 5270 5310 0.092
56 5 15E CC MO ND 5500 5700 0.058
56 6 15E CC MO ND 5510 5670 0.047
56 7 15E CC MO ND 5720 5720 0.044
56 8 15E CC MO ND 5710 5710 0.044
56 9 15E CC MO ND 5530 5690 0.091
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
57 1 15C CC 2402 2480 0.002
57 2 15C CC MO 2412 2462 0.104
57 3 15C CC MO 2422 2452 0.054
57 4 15C CC MO 5745 5825 0.045
57 5 15C CC MO 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
58 1 15B CC
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
59 1 15E CC MO 5180 5240 0.028
59 2 15E CC MO 5190 5230 0.044
59 3 15E CC MO ND 5260 5320 0.047
59 4 15E CC MO ND 5270 5310 0.092
59 5 15E CC MO ND 5500 5700 0.058
59 6 15E CC MO ND 5510 5670 0.047
59 7 15E CC MO ND 5720 5720 0.044
59 8 15E CC MO ND 5710 5710 0.044
59 9 15E CC MO ND 5530 5690 0.091
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
60 1 15C CC 2402.00000000 2480.00000000 0.0030000

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC