Half PCIe MINI CARD WLE200N2 WIRELESS-BGN 2 x 2 NETWORK MINIPCIE ADAPTER Superior Performance for Multimedia Networking WLE200N2 is an 802.11n Single-Band wireless mini pci express Half Mini Card based on Atheros AR9287 chipset. It supports 2T2R (2-
stream) function, which provides maximum data rate up to 300Mbps and improves the overall Wi-Fi coverage area. Secure Wireless Connection This Mini PCIe wireless card, WLE200N2, incorporated advanced security encryption, such as WPA, and WPA2, to help prevent users devices from malicious attacks. Features IEEE 802.11n compliant and backward compatible with 802.11b/g Atheros HB97 reference design 2.4GHz Single-band 2 x 2 MIMO spatial multiplexing technique Output Power up to 16dBm Supports up to 300Mbps physical data rates Multi-Country Roaming Supported 2 x U.FL Antenna Connector Complaint with PCI-Express Mini Card 1.1 Standard Enhanced wireless security: WEP, WPA, WPA2 Support Windows XP/ Vista, Win 7, Android by request Chipset Host Interface Operating Voltage Power Consumption Antenna Connector Output Power
(2T) Receive Sensitivity
(2R) Standards Technical Specifications AR9287 PCIExpress 1.1 Standard DC 3.3 V9%
Continue TX 570mA Continue Rx 530mA 2 x U.FL Antenna Connector 802.11b: 16dBm 1.5dBm@11Mbps 802.11g: 11dBm 1.5dBm@54Mbps 802.11gn HT20: 12dBm 1.5dBm@MCS7 802.11gn HT40: 11dBm 1.5dBm@MCS7 802.11b: -88dBm 2dBm@11Mbps 802.11g: -70dBm 2dBm@54Mbps 802.11gn HT20: -67dBm 2dBm@MCS7 802.11gn HT40: -65dBm 2dBm@MCS7 5.5Mbps 48Mbps IEEE 802.11b :
IEEE 802.11g :
11Mbps 54Mbps Fallback to 5.5Mbps, 2Mbps, 1Mbps 2Mbps 36Mbps 1Mbps 24Mbps 18Mbps 12Mbps 9Mbps 6Mbps automatically IEEE 802.11n :
20MHZ 40MHz 1Nss: 65Mbps @ 800GI, 72.2Mbps @ 400GI (Max.) 2Nss: 130Mbps @ 800GI, 144.4Mbps @ 400GI (Max.) 1Nss: 135Mbps @ 800GI, 150Mbps @ 400GI (Max.) 2Nss: 270Mbps @ 800GI, 300Mbps @ 400GI (Max.) Frequency Range IEEE 802.11b/g/n:
2.412GHz ~ 2.462GHz (US & Canada) 2.412GHz ~ 2.472GHz (Europe) 2.412GHz ~ 2.484GHz (Japan) OFDM: BPSK, QPSK, 16 QAM, 64QAM DSSS: DBPSK, DQPSK, CCK Operating: -20C to 70C Storage: -40C to 90C 5% to 95% (non-condensing) 9g 30mm x 26.8mm x 3.45mm Modulation Techniques Environment Specifications Humidity Weight Dimension Ordering Informaion Model Code WLE200N2 6A0000 Chipset AR9287 Form Factor Half Size CARD INFORMATIONS 802.11 b/g/n PCIe mini card
Configurations are subject to change without notice Please contact Compex sales representatives for other available configurations DIMENSIONS DRAWING Compex Systems Pte Ltd 135 Joo Seng Road, PM Industrial Building #08-01, Singapore 368363 Tel: (65) 6286 2086 Fax: (65) 6280-9947 Email: sales@compex.com.sg Compex (Suzhou) Co. Ltd No. 12, ChuangTou Industrial Square, LouFeng North, Suzhou Industrial Park, Suzhou, Jiangsu Province, China 21122 Tel: (86)-512-62950031 Fax: (86)-512-62950032 Copyright 2010 Compex Systems. All rights reserved. COMPEX and the COMPEX logo, are registered trademarks of COMPEX Inc. Atheros and other trademarks are properties of their respective owners. While every effort is made to ensure the information accurate, Compex does not accept liability for any errors or mistakes that may arise. All specification is subject to change without notice. DS: V1.0.1 Alex 120823 For more information, visit www.compex.com.sg IC Radiation Exposure Statement for Canada This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent is otropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. User manuals for transmitters equipped with detachable antennas shall also contain the following notice in a conspicuous location:
This radio transmitter (identify the device by certification number, or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le prsent metteur radio (identifier le dispositif par son numro de certification ou son numro de modle s'il fait partie du matriel de catgorie I) a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal et l'impdance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste,ou dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. Frequency Band Type Model No. Antenna
(GHz) 2.4 ~ 2.5 Dual Band Omni Directional Antenna SAA04-22008A 2.4 ~ 2.5 Omni Directional Antenna WD12020124G Gain (dBi) 4.5 2.0 The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. If the module installed in the host device. The antenna(s) used for this host device must be installed to provide a separation distance of at least 20cm from all persons. The host device shall be properly labelled to identify the modules within the host device. The Industry Canada certification label of a module shall be clearly visible at all times when installed in the host device, otherwise the host device must be labelled to display the Industry Canada certification number of the module, preceded by the words Contains transmitter module, or the word Contains, or similar wording expressing the same meaning, as follows:
Contains transmitter module IC: 7849A-WLE200N2 Compliance Information FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. This device must accept any interference received, including interference that may cause undesired operation. Product that is a radio transmitter is labeled with FCC ID. FCC Caution:
(1) Exposure to Radio Frequency Radiation. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
(2) Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment.
(3) This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
(4) Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. RF exposure warning This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The equipment must not be co-located or operating in conjunction with any other antenna or transmitter. IMPORTANT NOTE: In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. The antenna gain which being use as below:
(1) The modules FCC ID is not visible when installed in the host, or
(2) If the host is marketed so that end users do not have straight forward commonly used methods for access to remove the module so that the FCC ID of the module is visible; then an additional permanent OEM integration instructions This device is intended only for OEM integrators under the following conditions The antenna must be installed such that 20 cm is maintained between the antenna and usersand the transmitter module may not be co-located with any other transmit or antenna. The module shall be only used with the integral antenna(s) that has been originally tested and certified with this module. As long as 3 conditions above are metfurther transmitter test will not be required. Howeverthe OEM integrator is still responsible for testing their end-product for any additional compliance requirement with this module installed(for exampledigital device emissionPC peripheral requirementsetc.) OEM integration instructions In the event that these conditions cannot be met (for example certain laptop configuration or co-location with another transmitter), then the FCC authorization for this module in combination with the host equipment is no longer considered valid and the FCC ID of the module cannot be used on the final product. In these and circumstancethe OEM integrator will be responsible for re-evaluating. The end product (including the transmitter) and obtaining a separate FCC authorization End product labeling This transmitter module is authorization only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following Contains Transmitter Module FCC ID: CF S8DLWLE200N2 or Contains FCC ID: CF S8DLWLE200N2 Information that must be placed in the end user manual The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual.