all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
USERS MANUAL | Users Manual | 1.12 MiB | ||||
1 | Block Diagram | |||||||
1 | Operational Description | |||||||
1 | External Photos | native | ||||||
1 | Internal Photos | native | ||||||
1 | Internal Photos | native | ||||||
1 | ID Label/Location Info | native | ||||||
1 | Internal Photos | native | ||||||
1 | Internal Photos | native | ||||||
1 | Internal Photos | native | ||||||
1 | Internal Photos | native | ||||||
1 | Internal Photos | native | ||||||
1 | Internal Photos | native | ||||||
1 | Schematics | |||||||
1 | Schematics | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos | native | ||||||
1 | Test Setup Photos | native |
1 | USERS MANUAL | Users Manual | 1.12 MiB |
T8665C,D,E EnergyPro Thermostat OWNERS GUIDE U.S. Registered Trademark Copyright 2003 Honeywell International Inc. All Rights Reserved 69-1538 Contents 3 Introduction .................................................................................................................................... 4 Using this Guide ............................................................................................................................ Thermostat Features ..................................................................................................................... 7 Operating Your Thermostat ........................................................................................................... 11 Setting the Clock ........................................................................................................................... 12 Programming Your Thermostat ..................................................................................................... 25 Replacing the Batteries (T8665C Only) ......................................................................................... 38 Adaptive Intelligent Recovery Control ........................................................................................ 40 Troubleshooting (Table 3) .............................................................................................................. 43 Warranty ........................................................................................................................................ 50 Customer Assistance .................................................................................................................... 51 69-1538 2 INTRODUCTION Congratulations on purchasing your new EnergyPro Thermostat. This exciting new product is designed to add a new level of service, energy savings and convenience to your home comfort system. As part of a larger system of products and services from your Energy Utility, your new thermostat allows you to take advantage of special programs offered through your Energy Utility. These programs allow you to further increase your energy savings beyond the efficiency of a traditional programmable thermostat. Although the EnergyPro Thermostat can be used standalone, it is intended to be part of a communicating system provided by your Energy Utility. Read this document thoroughly to take advantage of the convenience and energy saving benefits of using this product. 3 69-1538 USING THIS GUIDE The T8665C,D,E Communicating Thermostat uses two-way radio frequency (RF) to send and receive information. This information can be used to make changes to your thermostat settings, or settings from your Energy Utility. The following symbols will help you identify the features that apply to your system:
7 0 80 9 0 60 6 0 70 90 8 0 HEAT PUMP 69-1538 Tip symbol. Look for helpful tips throughout this guide when you see this symbol. Compressor with the word, Heat Pump, below.These features are availble when used with a heat pump. 4 Keyboard and Display Description Keyboard The keyboard is located behind the thermostat cover. Three frequently used keys: increase , decrease , and i key are located next to the display. See Fig. 1. Display The thermostat displays important information such as day, time, schedule period, temperature, filter information, system and fan operation. See Fig. 2. WARNING: This product operates under provisions of Part 15 of the FCC Rules. Modifications to this product not specifically authorized by Honeywell may void the users authority to operate this device. TIME / TIME SETS TIME FORWARD OR BACK WAKE SET WAKE TIMES AND TEMPERATURES LEAVE SET LEAVE TIMES AND TEMPERATURES DIGITAL DISPLAY INCREASE RAISES TEMPERATURE SETTING SET CURRENT DAY/TIME SETS CURRENT DAY AND TIME RUN PROGRAM RETURNS THERMOSTAT TO NORMAL OPERATING MODE. PRESS AND HOLD TO CANCEL ENERGY SAVINGS AND PRE-HEAT/PRE-COOL MODES
(MY CHOICE). DAY SETS DAY OF THE WEEK HOLD TEMP SETS A HOLD TEMPERATURE SETTING AND ACTIVATES VACATION HOLD FEATURE DAYLIGHT TIME SELECTS STANDARD TIME OR DAYLIGHT SAVING TIME Run Program Set Current Day/Time Wake Leave Return Sleep Time Set Program Hold Temp Day Heat/Cool Settings Filter System Fan Daylight Time Copy COPY COPIES SETTINGS FROM ONE DAY TO ANOTHER DAY FOR QUICKPROGRAMMING DECREASE LOWERS TEMPERATURE SETTING INFORMATION DISPLAYS CURRENT HEAT/COOL TEMPERATURE SETTING, FILYER STATUS, AND OUTDOOR TEMPERATURE (WHEN INSTALLED). RETURN SET RETURN TIMES AND TEMPERATURES SLEEP SET SLEEP TIMES AND TEMPERATURES PROGRAM SCHEDULING WAKE LEAVE RETURN SLEEP ENTERS PROGRAMMING MODE FAN SELECTS AUTO/ON SYSTEM SELECTS HEAT/OFF/COOL (AUTO) HEAT/COOL SETTINGS SWITCHES BETWEEN HEAT SETPOINTS AND COOL SETPOINTS WHILE PROGRAMMING FILTER SELECTS FILTER TIMER REMINDER PERIOD (0, 15, 30, 60, 90, 120 DAYS) M20893A Fig. 1. Thermostat keyboard description. 5 69-1538 SHOWS ACTIVE PRICE TIER
(HIGH, MEDIUM OR LOW) SHOWS CRITICAL PRICE TIER IS ACTIVE SHOWS VACATION HOLD DURATION SHOWS FILTER TIMER EXPIRED (TIME TO REPLACE FILTER) SHOWS CURRENT DAY OR DAYS BEING PROGRAMMED SHOWS CURRENT PROGRAM PERIOD OR PERIOD BEING PROGRAMMED DISPLAYS EITHER CURRENT TIME OF DAY OR PROGRAM TIMES SHOWS WHEN THERMOSTAT IS IN THE PROGRAMMING MODE SHOWS THERMOSTAT IS IN THE SET CURRENT DAY/TIME MODE SHOWS TEMPERATURE SETTING CHANGED FOR THIS PROGRAM PERIOD SHOWS TEMPERATURE DISPLAYED IS THE CURRENT SET TEMPERATURE SHOWS THAT THERMOSTAT IS CALLING FOR HiMedLo Critical Hold for Filter Mon Wake Set Program Set Day/Time Temporary Setting AM Em Ht Aux Ht TueWedThuFriSat Sun Repl Batt Room Days Leave Return Sleep Recovery DST System Em Heat Off Wait Fan On Auto SHOWS CURRENT SYSTEM KEY POSITION HEAT/OFF/COOL SHOWS CURRENT FAN KEY POSITION ON/AUTO SHOWS BATTERIES NEED REPLACING SHOWS ADAPTIVE INTELLIGENT RECOVERYTM IS IN EFFECT SHOWS SYSTEM ON DAYLIGHT SAVING TIME SHOWS TEMPERATURE DISPLAYED IS THE CURRENT ROOM TEMPERATURE SHOWS SMART RESPONSE IS OFF AND CONVENTIONAL RECOVERY IS ON DISPLAYS EITHER ROOM OR SET TEMPERATURE Fig. 2. Example of thermostat display. SHOWS THERMOSTAT IS CALLING FOR THE FAN SHOWS THERMOSTAT IS COMMUNICATING SUCCESSFULLY M20894 69-1538 6 THERMOSTAT FEATURES Adaptive Intelligent Recovery Control for comfort and energy savings. Customize the program schedule program your own schedule to fit your needs. Temporary schedule overrideset the thermostat higher or lower for the current program schedule. Permanent schedule overrideset the thermostat higher or lower indefinitely. Vacation mode (1 to 255 days) for added comfort and energy savings. Set the temperature higher or lower for energy savings while on vacation. At the same time, set the comfort level you want when you return. Set the filter indicator (0, 15, 30, 60, 90, or 120 days) to remind you to change the filter. Information at the press of a buttonuse the i (information) key to see the outdoor temperature (C7089B Outdoor Temper-
ature Sensor optional accessory), the current setpoints, or the filter status. Daylight Time key for quick time changes between Daylight and Standard time. Backlit display for improved readability
(press any key to activate). Optional outdoor temperature display ask your installer to install an outdoor temperature sensor to activate this feature. For additional features, see the System Users Guide provided by your Energy Utility or systems provider. 7 69-1538 of this thermostat or these special programs and features, please contact your local Energy Utility. Set Program Set Day/Time Em Ht Aux Ht Sat Wake Room DST System Cool Fan Auto M20901 Special Energy Saving Features The EnergyPro Thermostat supports Demand Response and Price Response Programs from your Energy Utility. If you have any questions concerning the application of this thermostat or these special programs and features, please contact your local Energy Utility. Demand Response If your utility offers a Demand Response Program, this thermostat can be managed by your utility to reduce your energy consumption during times of peak demand. When your thermostat is helping your Energy Utility to manage energy in your community, the word, SAVE, is displayed on the thermostat as shown. If you have any questions about the application 69-1538 8 Pre-Cool and Pre-Heat Your Energy Utility may decide to use the Pre-cool /Pre-heat feature to slightly raise or lower your home temperature setting immediately prior to a Demand Response event to minimize the effect on your comfort. When the Pre-heat or Pre-cool option is in effect, the thermostat displays PrE. Set Program Set Day/Time Em Ht Aux Ht Tue Wake Room DST System Cool Fan Auto M20902 Price Response If your utility offers a Price Response Program, this thermostat works with your Energy Utility to inform you of the rate in effect at any given time and automatically adjust your energy use for each rate. The rate in effect is indicated on the thermostat display as shown (Critical, Hi, Med, and Lo). This typically involves controlling your home at a higher temperature during cooling season and a lower temperature during heating season to reduce energy consumption. 9 69-1538 Critical Set Program Set Day/Time AM Em Ht Aux Ht Tue Wake Room DST Display shows Critical rate in effect. Hi Set Program Set Day/Time AM Em Ht Aux Ht Tue Wake Room DST System Cool Fan Auto M20906 System Cool Fan Auto M20903 Med Set Program Set Day/Time AM Em Ht Aux Ht Tue Wake Room DST System Cool Fan Auto M20904 Display shows Medium rate in effect. Lo Set Program Set Day/Time AM Em Ht Aux Ht Tue Wake Room DST System Cool Fan Auto M20905 Display shows High rate in effect. Display shows Low rate in effect. 69-1538 10 My Choice There may be times when you need to cancel an energy-saving event such as Demand Response, Pre-heat or Pre-cool. Your Energy Utility may offer a program that incorporates the My Choice feature. To use My Choice and cancel an energy-saving event, press and hold Run Program key for three seconds until the thermostat displays Done. M14596 If the utility does not offer the My Choice feature, pressing and holding the Run Program key will not cancel the energy-saving event. Call your Energy Utility provider for further information. Program Run OPERATING YOUR THERMOSTAT Your new thermostat saves energy and keeps you comfortable at the same time. You may be wondering how to program your thermostat and how to use some more time and energy-saving features. First, lets look at features youll be using often, like setting the System and Fan keys, how to override the current programming mode or to hold the thermostat at a specific temperature while you go on vacation. You can 11 69-1538 even program the thermostat to return to your regular programming schedule on your last day of vacation so you are comfortable when you return and yet save energy while you are away. SETTING THE CLOCK Setting Current Day and Time IMPORTANT Always press keys with your fingertip or similar blunt tool. Sharp instruments like pens and pencil points can damage keyboard. On initial powerup or after an extended power loss, 1:00 PM flashes on display until a key is pressed. 69-1538 12 1. Press Set Current Day/Time key. PM Mon M14580 Press Set Current Day/Time key to show information displayed. Setting the clock can be controlled as part of the system using two-way RF communication; then the time is automatically updated. 80 70 60 90 7 0 8 0 9 0 6 0 2. Press Day key until current day displays. Day Mon = Monday, Tue = Tuesday, Tap Set Current Day/Time key to 7 0 80 9 0 60 6 0 70 90 8 0 Wed = Wednesday, Thu = Thursday, Fri = Friday, Sat = Saturday, Sun = Sunday. 7 0 80 9 0 60 6 0 70 90 8 0 advance time in one-hour increments. PM Press Day key to set current day. Example display shows Tuesday. M14581 3. Press Time or Time key until current time displays. 4. Press Run Program key to return to normal operation. Run Program AM Press Time or Time key to set current time. Example display shows 8:15 AM. M14582 13 69-1538 Daylight Saving Time NOTE:
If current time is Daylight Saving Time, press Daylight Time key to display DST. Daylight Time 0 6 0 9 8 0 7 0 90 60 70 80 Pressing Daylight Tiime key more than once in a five-minute period scrolls you through various time options (example: one-hour earlier or later with or without DST). Pressing Daylight Time six times in a five-minute period returns you to your original setting. AM Press Daylight Time key to set Daylight Saving Time. M14583 Setting System and Fan Keys Use the System and Fan keys to change the system and fan settings. The fan settings can be set for each schedule period individually. System selection is for all schedule periods. 69-1538 14 CAUTION Equipment Damage Hazard. Can cause permanent damage to the compressor or other equipment. To avoid possible compressor damage, allow compressor to remain off for five minutes before restarting. To avoid possible equipment damage, do not operate cooling when outside temperature is below 50F (10C). See equipment manufacturer instructions. Heat: The thermostat controls the heating. Off: Both the heating and cooling are off. Cool: The thermostat controls the cooling. Auto: The thermostat automatically changes between heating and cooling operation, depending on the indoor temperature. Em.Ht: Emergency heat is controlled as stage 1 heat. The Cooling system is off. The compressor is de-
energized. HEAT PUMP Setting System Key Press the System key until the desired system (Heat, Off, Cool, or Auto) displays. System 15 69-1538 Setting Fan Key Press Fan key until desired mode
(On or Auto) displays:
Fan On: Fan operates continuously. Auto: Fan operates only when heating or cooling. Setting Temporary Temperatures You can override the current schedule period to temporarily change the temperature setting until the next schedule period, or you can change and hold the temperature setting indefinitely. You can also change the temperature setting until a designated day and period (for example, while you are on vacation). 69-1538 16 Changing Temperature to Temporary Setting Until Next Schedule Period Press increase or decrease key until the desired temperature setpoint displays. Temporary Setting M14563 While selecting a temporary setting, only the setpoint displays. The temporary temperature setting you select displays for approximately three seconds. The display reads Temporary until the next period begins or when you cancel the temporary temperature setting. Press the Run Program key to cancel the temporary temperature setting before the designated time. Temporary AM Heat Mon Run Program System Heat Fan Auto After selecting a temporary setting, the display reads Temporary until cancelled. Example display shows temporary heat setting of 70 at 6:00 AM. M14564 If or appears under temperature display, 7 0 80 9 0 60 6 0 70 90 8 0 both heating and cooling setpoints are being adjusted. Tapping or key changes both heat and cool setpoints one degree.
(Press i key after setpoint is reached to verify setpoints.) Changing and Holding Temperature Setting Indefinitely 1. Press Hold Temp key once. 2. Press increase or decrease key to change temperature setpoint, if desired. Hold Temp 17 69-1538 NOTE: The Display changes from setpoint to room temperature after approximately three seconds. 3. Press Run Program key to cancel hold. Hold Temp Changing Temperature Setting Until a Designated Day and Period (Vacation Hold) 1. Press Hold Temp key twice. Hold Temp Setting System Heat Heat Fan Auto Press Hold Temp key once to display the thermostat in Hold mode. Example display shows temporary heat setting of 60. M14565 Hold for Wake Setting System Heat Days Heat Fan Auto M14833 Press Hold Temp key twice to display thermostat in Vacation mode. Example display shows temporary heat setting of 60. 69-1538 18 IMPORTANT To cancel Vacation Hold before desig-
nated time, press Run Program key. 3. Press Wake, Leave, Return or Sleep key to select the period the Hold ends. Wake Leave Return Sleep 2. Press Time or Time until desired number of days (1 to 255 days) displays. Hold for Wake Setting System Heat Days Heat Fan Auto M14834 Press Time or Time key to select number of vacation days. Example display shows 18 vacation days. System Heat Fan Auto M14571 In this example, the Hold ends after the 18th day at the beginning of the Return period. 4. Press increase or decrease to adjust temperature setting, if desired. 19 69-1538 5. Press Heat/Cool Settings key to change between heat and cool settings. Heat/Cool Settings 6. Press increase or decrease to adjust temperature setting, if desired (for example, if cool is set to 84, cooling equipment operates when room temperature is above 84F). 7. Press Run Program to start over or return display to normal. Run Program NOTE: Only the heating temperature is used when System is set to Heat. Similarly, only the cooling temperature is used when System is set to Cool. The thermostat uses both heating and cooling temperatures when System is set to Auto. System Heat Fan Auto M14572 Press increase or decrease key to select a new Hold temperature. Example display shows temporary heat setting of 55. 69-1538 20 Using the i (Information) Key AM Tue Wake Room DST System Em Heat Fan Auto INFORMATION KEY M20896 If filter status is expired, refer to Filter Indicator section. Sequence of i key presses is:
Filter status. Outdoor temperature (if equipped). Current setpoint of mode in use (Heat or Cool). Setpoint of mode not currently in use. Displaying Outdoor Temperature The i (information) key provides information at your fingertips in this sequence of key presses:
Outdoor temperature (if equipped). Current setpoint of mode in use (Heat or Cool). Setpoint of mode not currently in use. Filter status. Outdoor INFORMATION KEY M20897 Press i key once to display outdoor temperature. Example display shows outdoor temperature at 50. Press i key once to display outdoor temperature
(if equipped). 21 69-1538 If filter status is expired, press i key twice to display outdoor temper-
ature. See Filter Indicator section for instructions on resetting filter indicator. 80 70 60 90 7 0 8 0 9 0 6 0 Displaying Current Settings Press i key twice to check current temperature setpoint. Press i key three times to check temperature setpoint of mode not currently in use. 69-1538 22 Cool M20898 Press i key twice to display current setpoint. Example display shows cooling setpoint of 75. Without outdoor temperature sensor, press i key once to display current setpoint;
press i key twice for opposite setpoint. If filter status is expired, press i key three times 7 0 80 9 0 60 6 0 70 90 8 0 to check current temper-
ature setpoint, if equipped with outdoor sensor. Filter Indicator AM Room DST System Em Heat Fan Auto Filter Tue Wake FILTER EXPIRATION INDICATOR M20899 Your thermostat monitors the amount of time the fan is running and lets you know when to replace the filter, based on the number of fan run-time days you select. On expiration, thermostat displays Filter. One fan run-time day equals 24 fan run-time 7 0 80 9 0 60 6 0 70 90 8 0 hours. (If fan is on only one-
third of the time each day, it takes three days to deduct one fan run-time day.) Setting or Resetting Filter Indicator Your thermostat comes preset to a 30-day setting. To change this setting or reset after filter expiration:
1. Press Filter key to enter Filter mode. Filter M14577 Press Filter key to display filter information. Example display shows current fan run time set to 30 days with filter set to expire in five days. 2. Press and hold Filter key for at least three seconds to reset fan run time. 23 Filter 69-1538 LED Indicators (T8665D Only) Setting Filter Days HEAT PUMP FAULT MONITOR LED EQUIPMENT MONITOR LED Hold down Filter key to reset counter. M17762A 3. Press Time or Time until desired number of days display (0, 15, 30, 60, 90, or 120). 4. Press Run Program key to return to normal operation. Run Program IMPORTANT To track time fan is running, you must select a setting other than 0 (0 means off). If setting is 0 days, display always shows 0 Days; 0 Setting when Filter key is pressed. 69-1538 24 M19467 Two LED indicators located on upper right of the thermostat indicate when a Heat Pump Fault Monitor or Equipment Monitor signal is sent to the thermostat from the system. When Heat Pump Fault Monitor LED indicator lights (red), see Troubleshooting section. Heat Pump Fault Monitor LED lights red when heat pump failure is detected. Switch thermostat to Em. Ht. and contact you heat pump service com-
pany. Heating with Em. Ht. is expensive, so act quickly. HEAT PUMP Successful Communication Indicator The thermostat periodically sends and receives messages. The small triangle right of the temperature display indicates the thermostat successfully communicated with the system controller installed by your Energy Utility. Mon Temporary AM Heat System Heat Fan Auto M17763 PROGRAMMING YOUR THERMOSTAT 7-Day Program and Operation Your thermostat is 7-day programmable, which means you can set your thermostat for four periods (Wake, Leave, Return and Sleep) and up to eight temperatures (four Heat and four Cool) for each day of the week. Each day can be the same or different. 25 69-1538 Program Periods:
WAKEThe program period when you want the house at a comfortable temperature when you get up and while you get ready for work or school. (This is a higher temperature during heating season and a cooler temper-
ature during cooling season.) LEAVEThe program period you can set for an energy saving temperature while you are away at work or school. This is a lower tem-
perature during heating season, and higher temperature during cooling season and it follows the WAKE period. RETURNThe program period when you want the house at a comfortable tempera-
ture for activities before bedtime. This is a higher temperature during heating season and a cooler temperature during cooling season and it follows the energy-saving LEAVE period. SLEEPThe program period you set for an energy-saving temperature while you are sleeping. This is a lower temperature during heating season and a higher temperature during cooling season and it follows the RETURN period. 7-Day Preprogrammed Schedule Your thermostat is preprogrammed with the schedule shown in Table 1 (same schedule for all days of the week). You may keep this schedule or develop your own. Before starting the programming procedure, use Table 2 to plan your schedule. 69-1538 26 Instructions:
period. 1. Write the time you want for each program 2. Write the heating and cooling tempera-
tures you want for each period. 3. Draw a circle around the fan operation you desire for each period. Table 1. 7-Day Preprogrammed Schedule. Day All Days WAKE LEAVE RETURN SLEEP TIME FAN H 70
(21) 6:00 AM AUTO C 78
(2.5) TIME FAN H 62
(16.5) 8:00 AM AUTO C 85
(29.5) TIME FAN H 70
(21) 6:00 PM AUTO C 78
(25.5) TIME FAN H 62
(16.5) 10:00 PM AUTO C 82
(28) 27 69-1538 Customizing Your Own 7-Day Schedule Table 2. Your 7-Day Schedule. WAKE LEAVE RETURN SLEEP TIME FAN H TIME FAN H TIME FAN H TIME FAN H AUTO C AUTO C AUTO C AUTO C ON ON ON ON TIME FAN H TIME FAN H TIME FAN H TIME FAN H AUTO C AUTO C AUTO C AUTO C ON ON ON ON 28 TIME FAN H TIME FAN H TIME FAN H TIME FAN H AUTO C AUTO C AUTO C AUTO C ON ON ON ON TIME FAN H TIME FAN H TIME FAN H TIME FAN H AUTO C AUTO C AUTO C AUTO C ON ON ON ON Day SUN MON TUES WED 69-1538 Day THURS FRI SAT Table 2. Your 7-Day Schedule. (Continued) WAKE LEAVE RETURN SLEEP TIME FAN H TIME FAN H TIME FAN H AUTO C AUTO C AUTO C ON ON ON TIME FAN H TIME FAN H TIME FAN H AUTO C AUTO C AUTO C ON ON ON 29 TIME FAN H TIME FAN H TIME FAN H AUTO C AUTO C AUTO C ON ON ON TIME FAN H TIME FAN H TIME FAN H AUTO C AUTO C AUTO C ON ON ON 69-1538 Programming the First Day To modify the preprogrammed schedule, start by programming the Wake time and temper-
ature and fan operation for any one day. 1. Press the Wake key. Wake AM System Heat Fan Auto Press Wake key to enter program mode. Example display shows 6:00 AM Tuesday with Heat set to 70F. M14586 2. Press Day key until desired day displays. Day 69-1538 30 Set Program AM Setting System Heat Mon Wake Heat Fan Auto M14588 Press Day key to select day to program. Example display shows Monday is selected and ready to program. 3. Press Time or Time key until desired Wake time displays. Set Program AM Setting System Heat Set Program AM Setting System Heat Mon Wake Heat Fan Auto M14589 Press the Time or Time key to select time Wake period will begin. Example display shows Wake period will begin at 6:30 AM. The program times are in fifteen-minute 7 0 80 9 0 60 6 0 70 90 8 0 intervals; for example, 8:00, 8:15, 8:30. Mon Wake Heat Fan Auto M14590 Press increase or decrease key to select temperature for Wake period. Example display hows heating Wake period set for 68. Setpoint temperature range is 40 to 90F
(4 to 32C) for heating;
55 to 99F (13 to 37C) for cooling. 80 70 60 90 7 0 8 0 9 0 6 0 4. Press increase or decrease until desired Wake temperature displays. 31 69-1538 Set Program AM Setting System Heat Mon Wake Fan Cool Auto Press Heat/Cool Settings key to select cooling system (if you previously set heating temperature). Current setting displays. Example display shows cooling system previously set for 78. M14591 5. Press Fan key to modify fan operation. Selecting Auto means fan runs only when heating or cooling equipment is operat-
ing. Selecting On means fan runs contin-
uously for entire schedule period. Fan 6. Press Heat/Cool Settings key to make selections for opposite system setting
(either Heat or Cool). Heat/Cool Settings 69-1538 32 7. Press increase or decrease key until desired temperature setpoint displays. Set Program AM Setting System Heat Mon Wake Fan Cool Auto Press increase or decrease to select cooling Wake temperature. Example display shows cooling Wake period set for 76. M14592 8. Press Leave, Return or Sleep and repeat steps 3 through 6 to program entire day. The day (first day of a 7-day schedule) is now programmed. Leave Return Sleep IMPORTANT Repeat steps 1 through 7 for each day of the week that has a different schedule from the first day. Or refer to Copying a Day section to copy any programmed day to another day. 9. Press Run Program key to return to normal operation. Run Program Copying a Day The thermostat must be in program mode to 7 0 80 9 0 60 6 0 70 90 8 0 use the copy feature. Go to step 2 if the thermostat is already in program mode
(set program displays in upper left corner). 33 69-1538 1. Press Wake, Leave, Return or Sleep key to enter program mode. 3. Press Copy key. Copy Wake Leave Return Sleep 2. Press Day key to select the day to copy from. Day Set Program AM Setting System Heat Mon Wake Heat Fan Auto M14590 Press Day key to select the day schedule to copy. Example display shows thermostat in program mode with Monday ready to be copied. Mon Press Copy key to copy a day schedule into memory. Example display shows Monday schedule was coped into memory. M14594 4. Press Day key until day to be copied to is displayed. Day 69-1538 34 Mon Wed M14595 Press Day key again to select the day to copy to. Example display shows Monday and Wednesday. Because Monday was already selected, Monday schedule will be copied to Wednesday. 5. Press Copy key. Copy Press Copy key again to complete copy command. Example display shows donE. Monday schedule was successfully copied to Wednesday (Monday and Wednesday now have the same schedule). M14596 NOTE:
donE displays for two seconds before the normal display returns. 6. Repeat steps, as necessary, for all peri-
ods and days desired. 7. Press Run Program key to return to normal operation. Run Program 69-1538 35 Clearing a Program Period Thermostat must be in program mode to use 7 0 80 9 0 60 6 0 70 90 8 0 clear feature. Go to step 2 if thermostat is already in program mode (Set Program displays in upper left corner. 1. Press Leave, Return or Sleep key to enter program mode. Leave Return Sleep 69-1538 36 Set Program AM Setting System Heat Mon Leave Fan On Heat Press Leave, Return, or Sleep to enter the program mode. Example display shows 8:00 AM on Monday in Leave period with Heat set for 62. M14597 2. Press Day key until desired day displays. Day Set Program AM Setting System Heat Sat Leave Heat Fan On Press Day key to select the day to begin clearing the periods. Example display shows Saturday is selected. M14598 3. Press and hold Leave, Return or Sleep key until start time and temperature set-
ting clear (approximately three seconds). Leave Return Sleep Set Program Setting Sat Leave Heat Press and hold Leave, Return or Sleep key to clear the period for that day. Example display shows Saturday Leave period cleared. M14599 NOTE: Wake cannot be cleared. You do not have to program a replacement time 7 0 80 9 0 60 6 0 70 90 8 0 for the remaining periods;
for example, Wake and Sleep. If you clear only Leave and Return periods for Saturday (or any day), thermostat remains in Wake period for all of Saturday until Sleep period. 4. Repeat steps, as necessary, for all periods to be cleared. 5. Press Run Program key to return to normal operation. Run Program 37 69-1538 REPLACING THE BATTERIES
(T8665C ONLY) IMPORTANT Three AA alkaline batteries are included with the thermostat. Batteries must be installed for programming and operation of the thermostat and the heating/cooling system. 1. 2. Install batteries in wallplate so positive terminals all point up (as shown). If the thermostat is already mounted on the wall, remove the thermostat by placing your thumb between the thermostat and wallplate and pulling the thermostat up and away as shown on the next page. 69-1538 38 WALLPLATE B R RC O W Y G INSTALL 3 AA ALKALINE BATTERIES AS SHOWN, POSITIVE (+) TERMINALS TOWARD TOP. Day M10622 MPORTANT Although thermostat has a low battery indicator, replace batteries yearly to prevent leakage and thermostat and heating/cooling system from shutting down due to lack of thermostat battery power. 4. If you insert new batteries within 20 to 30 seconds of removing old batteries, the system retains current time and day. If the display is blank, batteries are dead or installed incorrectly. You must reset time and day. See Setting the Clock section. As a precaution, when leaving home for longer 7 0 80 9 0 60 6 0 70 90 8 0 than a month, change batteries before leaving to prevent system shutting down due to lack of power. 39 69-1538 M16424 3. When batteries are running low, a REPL BAT message flashes for one to two months before batteries run out com-
pletely. Replace batteries as soon as pos-
sible after message flashes. Always use fresh alkaline batteries. Non-
alkaline batteries do not last as long and can leak, causing damage to the thermostat and wall surface. ADAPTIVE INTELLIGENT RECOVERY CONTROL Your new thermostat is so smart, its almost human. You perceive temperature from a variety of sources, not only from the air in the room, but also from your surrounding walls, windows and furnishings. Humans feel differences in temperature as slight as two degrees Fahrenheit. Common household thermometers and standard thermostats sense only air temperature, which may not reflect how hot or cold the room actually new thermostat 69-1538 40 reads both the temperature of the wall and in the air, and responds to temperature changes as little as one degree Fahrenheit, so room temperature is more likely to feel right to you and your family. The thermostat acts like a computer. When calculating the time to turn on your heating or cooling system, it considers air temperature, wall temperature, and the time you want to reach the comfort temperature. After considering these three things, Adaptive Intelligent Recovery control gradually changes the temperature from the energy savings setting to the comfort setting (for example, from a heating temperature of 62 at night to 70 in the morning). The system runs continuously until the comfort temperature you choose is reached without overshooting the setting. This saves energy. How do you know when the system is in recovery? The thermostat displays Recovery whenever the thermostat activates Adaptive Intelligent Recovery control. (See display.) Recovery displays during recovery time from Sleep to Wake and from Leave to Return. Set Program Set Day/Time AM Em Ht Aux Ht Mon Wake Room Recovery System Heat Fan Auto M20895 After installation or new schedule programming, your thermostat learns from experience. Each day it checks how closely it hit the recovery target (for example, 70 at 6:00 AM) and adjusts the next days recovery start time accordingly. After four to eight days, the thermostat has adjusted to local weather, your lifestyle, the construction of your home, and your heating and cooling system. Optimum Comfort and Energy Savings In Fig. 3, Adaptive Intelligent Recovery control starts to recover at 5:00 AM and reaches the comfort temperature of 68 at 6:30 AM. Recovery time varies with the starting temperature and the comfort temperature you choose. 41 69-1538 At 7:00 AM System Operating in Comfort Mode AM Room System Heat Fan Auto At 6:00 AM Recovery Continues AM Mon Room Sleep Recovery Mon Wake System Heat Fan Auto 1 System Heat Fan Auto At 5:00 AM Recovery Continues AM Mon Room Sleep Recovery E R U T A R E P M E T At 4:00 AM Recovery Begins AM Mon Room Sleep Recovery System Heat Fan Auto ENERGY SAVINGS PERIOD RECOVERY FROM ENERGY SAVINGS TIME COMFORT PERIOD THE THERMOSTAT USES THE SAME SCHEME TO RETURN GRADUALLY TO LOWER COMFORT TEMPERATURE DURING THE COOLING SEASON. 1 IF In Recovery IS DISPLAYED, PRESS TO SEE THE COMFORT SETPOINT. M19473 Fig. 3. Explanation of Adaptive Intelligent Recovery control. 69-1538 42 TROUBLESHOOTING (TABLE 3) Table 3. Troubleshooting. Symptom Possible Cause Action Display does not come on. Thermostat is not being powered. Check if the thermostat is mounted and latched on the wallplatemount and latch the thermostat on the wallplate. Check if the circuit breaker is tripped reset the circuit breaker. Check if the fuse at the fuse box is blownreplace the fuse. Check if System switch at equipment is in the Off positionset to On position. Check if batteries are correctly installed be sure they are fresh and installed correctly. Replace them, if necessary. 43 69-1538 Table 3. Troubleshooting. (Continued) Symptom Possible Cause Action Temperature setting does not change (Example:
cannot set the heating higher or the cooling lower). The upper or lower temperature limits were reached. Check that the temperature setpoints are Heating: 40 to 90 (4.5 to 32 C). Cooling: 45 to 99 (7 to 37 C). 69-1538 44 Table 3. Troubleshooting. (Continued) Symptom Possible Cause Action Heating does not come on. The thermostat is part of a Demand Response event. No power to thermostat. System selection is not set to Heat. Heating setpoint is below room temperature. If thermostat indicates SAVE, wait until energy saving event is complete. To cancel energy saving event, if available, press and hold Run Program. Check that setpoint is above room temperature. Check if circuit breaker is trippedreset circuit breaker. Check if fuse at fuse box is blown replace fuse. Check if System switch at equipment is in Off positionset to On position. Wait five minutes for System to respond
(thermostat displays Wait). Set System selection to Heat. 45 69-1538 Table 3. Troubleshooting. (Continued) Symptom Possible Cause Action Cooling does not come on The thermostat is part of a Demand Response event. No power to thermostat. System selection is not set to Cool. Cooling setpoint is above room temperature. If thermostat indicates SAVE, wait until energy saving event is complete. To cancel energy saving event, if available, press and hold Run Program. Check that setpoint is below room temperature. Check if circuit breaker is trippedreset circuit breaker. Check if fuse at fuse box is blown replace fuse. Check if System switch at equipment is in Off positionset to On position. Wait five minutes for System to respond
(thermostat displays Wait). Set System selection to Cool. 69-1538 46 Table 3. Troubleshooting. (Continued) Symptom Possible Cause Action System on indicator for heat;
for cool is lit, but no warm or cool air is coming from the registers. Heat Pump Fault Monitor LED is lighted. Heating/cooling equipment turns on the fan when the equipment has reached the preset time or temperature. Wait a minute after seeing the or and then check the registers. The heat pump signaled the thermostat to indicate a problem. Move the System switch to Em. Ht setting
(heat pump only). See Heat pump Operating Instructions or call your local heat pump dealer or Energy Utility for assistance. 47 69-1538 Table 3. Troubleshooting. (Continued) Symptom Possible Cause Action Room temperature is cooler than current setting and air conditioner is still running. Outdoor temperature is not displayed or is incorrect. Thermostat is operating in Pre-cool mode. If the thermostat displays PrE, wait until the Pre-cool event is complete. To cancel, press and hold Run Program for three seconds until DONE is displayed. Installer did not activate this option. Outdoor sensor is connected incorrectly. Filter expired. 69-1538 48 If PrE does not display, contact your local heating contractor or Energy Utility. Contact installer or service technician. Press i key twice for outdoor temperature when filter expiration shows on display. Refer to the Filter Indicator section. Table 3. Troubleshooting. (Continued) Symptom Possible Cause Action 1COM is displayed. Heat or cool turns on before programmed time. The thermostat is unable to communicate with Energy Utility management system controller. Adaptive Intelligent Recovery control is on. Contact your energy utility for assistance. Adaptive Intelligent Recovery control brings the heat or cool on early to meet the temperature set for the programmed period. See Adaptive Intelligent Recovery control section. To disable Adaptive Intelligent Recovery control, contact you local Heating and Air Conditioning contractor. 49 69-1538 WARRANTY Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use and service, for a period of one (1) year from the date of purchase by the consumer. If, at any time during the warranty period, the product is defective or malfunctions, Honeywell shall repair or replace it (at Honeywells option) within a reasonable period of time. If the product is defective:
(i) return it, with a bill of sale or other dated proof of purchase, to the retailer where you purchased it, or
(ii) package it carefully, along with proof of purchase
(including date of purchase) and a short description of the malfunction, and mail it, postage prepaid, to the following address:
Honeywell Return Goods Dock 4 MN10-3860 1885 Douglas Drive North Golden Valley, MN 55422 This warranty does not cover removal or reinstallation costs. This warranty shall not apply if it is shown by Honeywell that the defect or malfunction was caused by damage which occurred while the product was in the possession of a consumer. Honeywells sole responsibility shall be to repair or replace the product within the terms stated above. HONEYWELL SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY WARRANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS PRODUCT. Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation may not apply to you. 69-1538 50 CUSTOMER ASSISTANCE After reading this guide, if you have any questions about the operation of your thermostat, please visit the Honeywell website at www.honeywell.com/yourhome. For service, contact your Installer or Energy Utility company or service provider. THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL MAKES ON THIS PRODUCT. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED TO THE ONE YEAR DURATION OF THIS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from state to state. If you have any questions concerning this warranty, please write our Honeywell Customer Relations, 1985 Douglas Drive North, Golden Valley, MN 55422. In Canada, write Retail Products ON15-02H, Honeywell Limited/Honeywell Limite, 35 Dynamic Drive, Scarborough, Ontario M1V 4Z9. 51 69-1538 Automation and Control Solutions Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 Honeywell Limited-Honeywell Limite 35 Dynamic Drive Scarborough, Ontario M1V 4Z9 69-1538 G.H. 04-03 Printed in Taiwan R.O.C. www.honeywell.com/yourhome
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2003-06-24 | 916.2 ~ 916.8 | DXT - Part 15 Low Power Transceiver, Rx Verified | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2003-06-24
|
||||
1 | Applicant's complete, legal business name |
Ademco Inc
|
||||
1 | FCC Registration Number (FRN) |
0004788345
|
||||
1 | Physical Address |
1985 Douglas Drive
|
||||
1 |
Golden Valley, Minnesota 55422-3922
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
HS9
|
||||
1 | Equipment Product Code |
T8665D
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
P****** W******
|
||||
1 | Title |
Sr. Compliance Engr
|
||||
1 | Telephone Number |
763-9********
|
||||
1 | Fax Number |
763-9********
|
||||
1 |
P******@Honeywell.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DXT - Part 15 Low Power Transceiver, Rx Verified | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | WIRELESS THERMOSTAT | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Carl T. Jones Corporation
|
||||
1 | Name |
C******** J****
|
||||
1 | Telephone Number |
703-5********
|
||||
1 | Fax Number |
12345********
|
||||
1 |
c******@ctjc.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CE | 916.20000000 | 916.80000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC