Specification PCM-UR02 Android Mainboard SPEC (V_1.0) 1 / 8 Specification Chapter 1 Product Overview---------------3 1.1 Overview --------------------------3 1.2 Description -------------------3 1.3 Sketch map of appearance and interface----4 Chapter 2 Hardware Spec----------5 Chapter 3 Dimension drawing -------------7 Chapter 4 Note---------------------------8 2 / 8 Specification Product 1 Overview Chapter 1.1 Overview PCM-UR02 board is one Android mainboard based on RK3288 chip with small size,high performance,low power consumption,cost-effective and so on.It supports Ethernet,HDMI,WIFI,Bluetooth,Camera, supports most video and image format, supports HDMI/VGA video outputLVDS display driver with dual 8 bits. It also could lighten different sizes of TFT LCDsimplify the system design of the machine, with SD card and SIM card connector more strong stability suitable for POS cash registervideo advertising machineself-service terminalssmart home and used for various industry applications. 1.2 Description Full functionwith USB/LVDS/MIPI/Ethernet/HDMI/WIFI/Bluetooths on boardsimplifing the system designwith SD card connector. network support built in PCI-E connector support all kinds of with PCI-E connectortransferring and updating on linebetter suited for remote maintenance of POS POS cash register advertising machine,saving labor cost. Full extended connectorseight USB2.0(6 sockets,2 standard USB 2.0),3 UART, GPIO/ADCsatisfy all kinds of peripheral needs. definitionMaximum support for 4K decoding and different High kind 3 / 8 Specification of LCDs with LVDS singnal. 1.3 Sketch map of appearance and interface TOP Bottom 4 / 8 Specification Chapter 2 Hardware Spec CPU Memory FLASH Hardware Spec sheet RK3288 Cortex A17 Quad-core @1.6GHz 2G eMMC FLASH 16G WIFIBluetooth Built in Wifi/Bluetooth Ethernet USB socket X110M/100M/1000M 2 USB HOST + 6 USB socket 2 RS232 ttyS1, ttyS3+1 DB9-ttyS4 Extended memory Support TF card HDMI output LVDS output EDP output Audio output RTC IR Time switch OS Support 4K Support Dual LVDS output Support 1080P Support left/right channel outputBuilt Speakerearphone socket Mic socket Support Support Support Android8.1 above OS updating Support USB/TF/Network on line updating Working temperature Weight(g) 0~60C 147.5 5 / 8 Specification Video Image Support aviflvwmvrmrmvbmpeg tsmp4 etc. Support JPEGPNGGIFBMP etc. 6 / 8 Specification Chapter 3 Dimension drawing 3.1PCB Dimension PCB6 Layer Size146mm*102mm0.5mm, thickness1.6mm0.5mm Screw hole specificationDiameter3mm0.5mm x 4 7 / 8 Specification Chapter 4 Note During assembly and use, please pay attention to the following problems:
1. Short circuit between bare board and peripherals. 2. Pay attention to anti-static measures during assembly to avoid damaging the motherboard. 3. When installing LVDS panel, pay attention to whether the voltage and current of the panel meet the requirements. Pay attention to the pin pin sequence of the screen socket. 4. When installing LVDS screen, pay attention to whether the screen backlight voltage and current meet the requirements. If the power of the screen backlight is more than 20W, whether to use other power supply boards for power supply. 5. When installing peripherals (USB, IO. Etc), pay attention to the IO level and current output of peripherals. 8 / 8 FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) thi s device may not cause harmful interference, and (2) this device must accept any interference received, incl uding interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursua nt to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inte rference in a residential installation. This equipment generates uses and can radiate radio frequency energy a nd, if not installed and used in accordance with the instructions, may cause harmful interference to radio com munications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turn ing the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help important announcement Important Note:
Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Country Code selection feature to be disabled for products marketed to the US/Canada. This device is intended only for OEM integrators under the following conditions:
1. The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2. The transmitter module may not be co-located with any other transmitter or antenna, 3. For all products market in US, OEM has to limit the operation channels in CH1 to CH11 for 2.4G band by supplied firmware programming tool. OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain change. (if modular only test Channel 1-11) As long as the three conditions above are met, further transmitter testing will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Important Note:
In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling The final end product must be labeled in a visible area with the following" Contains FCC ID: M82-PCMUR02"
Manual Information to the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01 2.2 List of applicable FCC rules CFR 47 FCC PART 15 SUBPART C has been investigated. It is applicable to the modular transmitter 2.3 Specific operational use conditions This module is stand-alone modular. If the end product will involve the Multiple simultaneously transmitting condition or different operational conditions for a stand-alone modular transmitter in a host, host manufacturer have to consult with module manufacturer for the installation method in end system. 2.4 Limited module procedures Not applicable 2.5 Trace antenna designs Not applicable 2.6 RF exposure considerations This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 2.7 Antennas This radio transmitter FCC ID:M82-PCMUR02 has been approved by Federal Communications Commission to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. Antenna No. Bluetooth&2.4G 5GWIFI Model No. of antenna:
Type of antenna:
Gain of the antenna
(Max.) Frequency range:
PIFA Antenna PIFA Antenna 1.26dBi for 2400~2500MHz;
0.74dBi for 5150~5850MHz;
2.8 Label and compliance information The final end product must be labeled in a visible area with the following" Contains FCC ID:M82-PCMUR02". 2.9 Information on test modes and additional testing requirements Host manufacturer is strongly recommended to confirm compliance with FCC requirements for the transmitter when the module is installed in the host. 2.10 Additional testing, Part 15 Subpart B disclaimer Host manufacturer is responsible for compliance of the host system with module installed with all other applicable requirements for the system such as Part 15 B.