FCC ID: 2ATCAULDWAV USB-C Dock Wave 3-in-1

Making the Connection A) Docking Station 1. Connect the USB-C Dock Wave to the Thunderbolt 3/ USB-C port (DP Alt mode enabled) on your laptop. The Plug and Play design allow you to use the dock without installing any drivers or software. 2. Connect the dock to an external 4K HDMI display with a compatible cable. 3. Charging an external device via the USB-A port requires a compatible cable. 4. Charge your laptop via the USB-C port with a compatible USB-C cable and USB-C charger (Should have minimum 45W power output) 5. Data transfer is available via any of the following connections: 2 x USB-A, SD and micro SD card readers. compatible cables not included. B) Wireless power bank 1. Before using the Dock Waves wireless charging capabilities, fully charge the device by plugging it into a USB-C compatible wall charger. All four white LED lights will appear once the dock is fully charged. 2. Press the power button for 3 seconds to turn the power bank on. 3. Press the power button twice to switch the wireless charging on. 4. Place your Qi-enabled device on the wireless charging pad. Ensure that the centre of the device is aligned with the Qi logo. The blue LED light will appear to breathe slowly, indicating that your device is charging. In the event that a foreign object is detected or if your device is emitting high temperatures the LED indicator will flash red. 5. 6. Battery capacity is indicated by the four LED lights, as 25% increments. 7. Turn off the power bank by pressing the power button for 3 seconds. wall charger not included. 4 5 6

ALOGIC Corporation Pty Ltd. To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Regarding; Confidentiality Request regarding application for FCC ID: 2ATCAULDWAV LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission's rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic Block Diagram Operational Description The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Print Name: Pratik Kumar Title: Product Manager f Signature:

On behalf of Company: ALOGIC Corporation Pty Ltd. Telephone: +61405653162 Fax: +61 39706 6081 E-mail: pratik.kumar@alogic.co

ALOGIC Corporation Pty Ltd. Cover Letter-Wireless Charger Approval FCC ID: 2ATCAULDWAV Date: 2019-11-26 Gentlemen:

Theres a Wireless charger that would like to have your authorization as an Inductive wireless power transfer applications approval. The specific product as below, Wireless charger , with its designed features and specified description, meets special requirements for KDB 680106 DO1 section 5.2 requirements. Product Name:

Model Number:

FCC ID:

KDB 680106 DO1 Section 5.2 Requirements:

a) Power transfer frequency is less than 1 MHz b) Output power from each primary coil is less than or equal to ALOGIC Corporation Pty Ltd. USB-C Dock Wave 3-in-1 ULDWAV 2ATCAULDWAV Product Technical Specification:

114.42KHz to194.39KHz Complied 5watts Complied 15 watts. c) The transfer system includes only single primary and secondary Complied coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils d) Client device is placed directly in contact with the transmitter. e) Mobile exposure conditions only (portable exposure conditions Complied Complied are not covered by this exclusion) f) The aggregate H-field strengths at 15 cm surrounding the Please refer to RF exposure report Complied device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Sincerely, Print Name: Pratik Kumar Title: Product Manager Signature: aa?

On behalf of Company: ALOGIC Corporation Pty Ltd. Telephone: +61405653162 Fax: +61 3 9706 6081

ALOGIC Corporation Pty Ltd. Date: 2019-11-26 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID : 2ATCAULDWAV To whom it may concern:

We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Joyce Shi in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, | acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with ALOGIC Corporation Pty Ltd. This authorization is valid until further written notice from the applicant. Print Name: Pratik Kumar Title: Product Manager Signature: Pose On behalf of Company: ALOGIC Corporation Pty Ltd. Telephone: +61405653162 Fax: +61 3 9706 6081 E-mail: pratik.kumar@alogic.co