all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 1.56 MiB | December 08 2014 | |||
1 | Cover Letter(s) | December 08 2014 | ||||||
1 | Cover Letter(s) | December 08 2014 | ||||||
1 | External Photos | December 08 2014 | ||||||
1 | ID Label/Location Info | December 08 2014 |
1 | User Manual | Users Manual | 1.56 MiB | December 08 2014 |
3.5 '' Auto Tracking Wireless Video Baby Monitor User's Manual Manuel de l'utilisateur Manual del Usuario Bedienungsanleitung Manuale d'uso I H S L G N E I S A N A R F L O A P S E H C S T U E D O N A I L A T I Figures and Quick Guide / Figures et Guide d'utilisation rapide
/ Figuras y gua rpida / Abbildungen und Schnellanleitung
/ Figure e Guida rapida Product Layout / Description du produit / Esquema del producto
/ Produktbersicht / Struttura del prodotto Camera / Camra / Cmara / Kamera / Telecamera 1 2 3 4 5 Fig. 1 Monitor /
Moniteur 12 13 14 15 16 1 11 10 9 i Fig. 2 6 7 8 9 10 17 18 4 2 3 5 6 7 8 19 Setup / Installation / Configuracin / Einrichtung / Installazione 1 Camera Setup / Installation de la camra / Configuracin de la cmara
/ Kameraeinrichtung / Installazione della telecamera 1.1 Power Supply - Using AC Power Alimentation - Avec alimentation secteur Fuente de alimentacin - Utilizar la alimentacin de CA Stromversorgung ber Netzstrom Alimentazione - Uso dell'alimentazione CA Fig. 3 ii 2 Monitor Setup / Installation du moniteur / Configuracin del monitor 2.1
/ Monitoreinrichtung / Installazione del monitor Power Supply / Alimentation / Fuente de alimentacin / Stromversorgung
/ Alimentazione Loading the Battery / Installation de la batterie / Insertar las pilas
/ Akku einlegen / Inserimento delle batterie 11 2 3 Using AC Power / Utilisation de l'alimentation secteur
/ Uso de la alimentacin de CA / Netzstrom verwenden
/ Uso dell'alimentazione CA Fig. 4 3 1 2 Fig. 5 Out of Range iii 2.2 Monitor Remote Control Function Fonction tlcommande du moniteur Funcin del mando a distancia del monitor Monitorfernbedienungsfunktion Funzioni del telecomando del monitor Tilt Pan Fig. 6 2.3 Zoom in Function / Fonction de zoom
/ Funcin de zoom de ampliacin / Vergrern-Funktion
/ Funzione ingrandimento Fig. 7 2.4 Video ON/OFF Function
/ Activer/dsactiver la fonction vido
/ Funcin de ACTIVACIN Y DESACTIVACIN de vdeo
/ Video-ein/aus-Funktion
/ Funzione Video ON/OFF Fig. 8 iv 2.5 Volume Setting / Rglage du volume
/ Configuracin del volumen
/ Lautstrkeeinstellung / Impostazione del volume Fig. 9 2.6 Talkback Function / Fonction de rponse
/ Funcin de intercomunicador
/ Gegensprechfunktion / Funzione interfono Fig. 10 2.7 Music Function / Fonction de musique / Funcin de msica
/ Musikfunktion / Funzione musica Fig. 11 v 3 Menu Options / Options du menu / Opciones del men
/ Menoptionen / Opzioni del menu Fig. 12 3.1 Camera Selection / Slection de la camra / Seleccin de la cmara
/ Kameraauswahl / Selezione telecamera Fig. 13 3.2 Feed Timer Setting / Paramtre du minuteur d'alimentation
/ Configuracin del temporizador de fuentes
/ Ftterungstimer-Einstellung / Impostazione timer alimentazione Fig. 14 vi 3.3 Temperature Setting / Rglage de la temprature
/ Configuracin de la temperatura / Temperatureinstellung
/ Impostazione temperatura Fig. 15 3.4 Camera Setting / Paramtre camra
/ Configuracin de la cmara
/ Kameraeinstellung / Impostazione videocamera Fig. 16 3.5 Brightness Setting / Rglage de la luminosit / Configuracin del brillo
/ Helligkeitseinstellung / Impostazione della luminosit Fig. 17 vii 3.6 Auto tracking / Suivi automatique / Seguimiento automtico
/ Auto-Verfolgung / Tracking automatico Fig. 18 4 Status Information /
Informations de statut
/
/
Informacin de estado Statusinformationen Informazioni di stato
/
1 2 3 4 5 6 7 8 9 10 viii Fig. 19 Package Contents One Camera One Monitor Two Power Adapters Battery for Monitor ( 3.7V 1100mAh Li-ion ) Two Cable Clips One Screw and One Wall Anchor This User's Manual Product Layout Camera (Fig. 1) 1. Light sensor 2. Microphone 3. Lens 4. Infrared LEDs 5. Speaker 6. Power adapter plug 7. Power/Pairing button 8. Antenna 9. Temperature sensor 10. Power indicator LED Monitor (Fig. 2) 1. LCD screen 2. Left button 3. Up button 4. Zoom/OK button 5. Right button 6. Down button 7. Speaker 8. Microphone 9. Power indicator LED 10. 11. Volume indicator LEDs 12. 13. Music button 14. Volume setup button 15. Talkback button 16. Menu button 17. Battery compartment 18. Holder 19. Power adapter plug Power / Video ON/OFF button Video OFF indicator LED I H S L G N E 1 Setup 1 1.1 1.2 1.3 1.4 2 2.1 2 Camera Setup ower Supply - Using AC Power P 1. Plug one end of the provided power adapter into a wall outlet and the other end into the back of the camera. See Fig. 3. Note : Use the adapter labeled OUTPUT: 6V DC with the camera. 2. Press the POWER button and keep it around 3 seconds to turn on the camera. The LED on the camera will light up (green light). See Fig. 3. Note : Press the POWER button and keep it around 3 seconds to turn off the camera. Fine Tuning Place the camera in a convenient location, point the lens toward the observation area. Night Vision The camera has eight high-intensity LEDs for picking up clear images in the dark. When the light sensor detects low ambient light levels, the LEDs will be automatically activated. Room Temperature Measurement Temperature sensor can measure room temperature on camera side and the room temperature indicator will be displayed on the screen of the monitor unit. Monitor Setup Power Supply The monitor uses 3.7V 1100mAh (Li-ion) battery or the household AC power current. Loading the Battery 1. Open the battery compartment cover on the rear of the monitor. See Fig. 4. 2. Insert the battery with the metal facing the battery compartment. See Fig. 4. 3. Close the battery compartment cover, and make sure it is locked securely. 4. Press the POWER
/ Video ON/OFF button and keep it around 3 seconds to turn the monitor on. See Fig. 4. Note 1: When power is sufficient, the "Power" LED will light up (green light);
When battery is low, the red LED light will start blinking. Note 2: Press the POWER to turn off the monitor. button and keep it around 3 seconds
/ Video ON/OFF 2.2 2.3 2.4 Using AC Power 1. Plug one end of the provided power adapter into a wall outlet and the other end into the monitor. See Fig. 5. Note : Use the adapter labeled OUTPUT: 6V DC with the monitor. 2. Press the POWER /
Video ON/OFF button and keep it around 3 seconds to turn the monitor on. See Fig. 5. Video ON/OFF button and keep it around 3 seconds Note 1: When power on the monitor, "Power" LED will light up (green light). Note 2: "Out of Range" will be displayed on the LCD screen if the monitor exceeds the range (unlink). Note 3: Press the POWER /
to turn off the monitor. Monitor Remote Control Function The monitor can control the movement of the camera. The camera head has the ability to rotate up, down, right and left. Press the up or down buttons on monitor to move the camera up or down. Press the left or right buttons on monitor to move the camera left or to the right. See Fig. 6. Note 1: Besides manual camera movement, the camera can also track moving objects using the auto tracking function. Auto tracking can be enabled or disabled in the menu. Note 2: The audio will be muted when the motor rotates. Zoom in Function Press the Zoom/OK button on monitor once for a 2X zoom of image and press again to change back to normal view. See Fig. 7. Note : When the zoom in function is enabled, auto tracking will be disabled until the user zooms out. Video ON/OFF Function 1. Press and hold the Power / Video ON/OFF button for less than one second on the monitor to switch Video ON/OFF function. This will turn the screen OFF but the Video OFF LED will remain ON (green) to remind the user that the Video OFF function is enable. Please see Fig. 8. 2. If you only want to hear your baby, press the Video ON/OFF button on the monitor to turn the screen off. Press again to turn on the screen. 3 Volume Setting 1. Press the volume setup button to enter volume setup. See Fig. 9. 2. Press up or down buttons to adjust volume level, and then press ok button to confirm the setting. Fig. 9. Talkback Function Press the talkback button to speak through the camera unit, and the icon will then be displayed on the screen. See Fig. 10. Music Function You can play the music with the camera (three pieces of music) . 1. Press the music button , the camera will play music. See Fig. 11. 2. Press the music button again, the camera will play the next song. Menu Options 1. Press the menu button on the monitor unit to display the main menu on the screen. See Fig. 12. 6 2. Use the left and right buttons to navigate through the menu. 3. Press the Zoom/OK button to confirm a setting. 4. The main menu contains submenus. Camera Selection ( Camera Select ) In this submenu you can switch between multiple cameras if the cameras have been paired. See Fig. 13. Feed Timer Setting ( Feed Timer ) In this submenu you can set up feed timer to remind you the timing. See Fig. 14. Temperature Setting ( Temp. Setting ) 1. In this submenu you can choose the temperature unit between degrees Celsius or degrees Fahrenheit. See Fig. 15. 2. You can set the temperature range of the temperature alert. If you select "Alert On" to enable the temperature alert and the temperature is outside the range, a warning sound will be emitted from the monitor unit. See Fig. 15. Camera Setting ( Camera Setting ) The system comes with a camera unit that has already been paired with the monitor unit. The "Cam Setting" function gives each baby unit a separate channel on the monitor unit. This is necessary for configuring additional camera units. 2.5 2.6 2.7 3 3.1 3.2 3.3 3.4 4 1. If you want to add a new camera, please choose which number of cameras you want to add, and then select add camera icon and press the button to confirm your selection (See Fig. 16). The screen will show "Press the pairing button on the Baby unit" , and then please also press and hold the power button less than 1 second on the camera side at the same time. 2. If you want to delete a paired camera, please choose which number of cameras you want to delete, and then select delete camera icon to delete the camera
(See Fig. 16). Brightness Setting ( Brightness ) In this submenu you can adjust brightness of the screen. See Fig. 17. Auto Tracking Setting ( Auto Tracking ) In the submenu you can select "On" to enable the auto tracking function or select
"Off " to disable it. When auto tracking is enabled, the camera will track moving objects in the camera viewing range. Please see Fig. 18. Note 1: The audio will be muted when motor rotates. Note 2: When the zoom in function is enabled, auto tracking will be disabled until the user zooms out. Status Information The status bar will be displayed on the top of the screen. See Fig. 19
. 3.5 3.6 4 1. Signal strength indicator 2. Camera number indicator 3. Temperature alert on/off indicator 4. Room temperature indicator 5. Zoom in indicator 6. Feed timer 7. Auto tracking 8. Talkback indicator 9. Battery status/Charging indicator 10.Music indicator 5 Troubleshooting are not getting any signal at all You Make sure the camera and the monitor are turned on. Make sure the power plugs are pushed all the way in. If the signal is poor, or there is interference If there is a microwave oven in use in the path between the camera and monitor, remove the microwave oven or turn it off. Make sure the camera and the monitor are within range of each other
(range of approximately 500 feet; 150 meters in a clear line of sight). If the power LED is on but only voice signal input is detected, the monitor can be in voice-activated mode. Press the VOX button to turn on the screen. Care and Maintenance Keep all parts and accessories out of children's reach. Fingerprints or dirt on the lens surface can adversely affect camera performances. Avoid touching the lens surface with your fingers. Should the lens become dirty, use a blower to blow off dirt and dust, or a soft, dry cloth to wipe off the lens. Keep the camera dry. Precipitation, humidity, and other liquids contain minerals will corrode electronic circuits. Do not use or store in dusty, dirty areas. Do not store in hot areas. High temperatures can shorten the life of electronic devices and warp or melt certain plastics. Do not store in very cold areas. When the system warms up (to its normal temperature), moisture can form inside the case, which may damage electronic circuit boards. Do not attempt to open the case. Non-expert handling of the device may damage the system. Avoid dropping or strong shocks. Operate this product using only with the power supply included or provided as an accessory. Do not overload electrical outlets or extension cords this can result in fire or electric shocks. Do remember that you are using public airwaves when you use the system and that sound and video may be broadcast to other 2.4 GHz receiving devices. Conversations, even from rooms near the camera, may be broadcast.To protect the privacy of your home, always turn the camera off when not in use. 6 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. 7 Following the safety tips To prevent deaths and injuries associated with baby monitor cords :
baby at least 3 feet (1 meter) away. It's important even if your baby is not yet standing or mobile. Make sure the baby unit and AC adapter cords are always out of reach of the Note :
Use a wireless baby monitor to avoid risk of strangulation. Never use extension cords with AC adapters. Only use the AC adapters provided. Specifications Camera Frequency Antenna Transmission distance Modulation Image Sensor Lens IR LED Dimensions Weight Power Operating temperature 2.4 GHz Dipole antenna 150 M (Line of Sight) GFSK, FHSS CMOS image sensor f 3.0mm, F 2.4 8 pcs 8.5(W) x 11(H) x 10(D) cm 223g DC 6V, 800mA 0 ~ 40 (32 ~ 104) Specifications subject to change without notice Monitor Frequency 2.4 GHz Antenna Monopole antenna Modulation GFSK, FHSS Display 3.5" LCD panel Display colors Full-color Brightness Control 8 levels Video ON/OFF Yes Dimensions 12(W) x 8.3(H) x 2.6(D) cm Weight 154g Power DC 6V, 800mA or Li battery Operating temperature 0 ~ 40 (32 ~ 104) This item is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. 8 Contenus de la bote Une camra Un moniteur Deux adaptateurs de courant Batterie pour le moniteur (3,7V 1100mAh Li-ion) Deux clips de cble Une vis et un ancrage de mur Ce Manuel de l'utilisateur Description du produit Camra (Fig. 1) 1. Capteur de lumire 2. Microphone 3. Objectif 4. DEL infrarouges 5. Haut-parleur 6. Prise de l'adaptateur de courant 7. Bouton d'alimentation/appariement 8. Antenne 9. Capteur de temprature 10. Voyant d'alimentation DEL Moniteur (Fig. 2) 1. cran LCD 2. Bouton gauche 3. Bouton haut 4. Bouton Zoom/OK 5. Bouton droite 6. Bouton bas 7. Haut-parleur 8. Microphone 9. Voyant d'alimentation 10. Voyant DEL de vido dsactive 11. Voyant de volume DEL 12. Bouton d'alimentation et activation ou dsactivation de la vido 13. Bouton de slection de musique 14. Bouton de configuration du volume 15. Bouton de rponse 16. Bouton menu 17. Compartiment des piles 18. Support 19. Prise de l'adaptateur de courant I S A N A R F 9 Installation 1 1.1 Installation de la camra Alimentation - Avec alimentation secteur 1. Branchez un cot de ladaptateur d'alimentation fourni sur une prise de courant et lautre cot sur la prise l'arrire de la camra. Voir Fig. 3. Remarque : Utilisez l'adaptateur indiqu SORTIE : 6V DC avec la camra. 2. Appuyez sur le bouton ALIMENTATION sans arrter pendant environ 3 secondes pour allumer la camra. Le DEL de la camra s'allumera (couleur verte). Voir Fig. 3. Remarque : Appuyez sur le bouton ALIMENTATION sans arrter pendant environ 3 secondes pour teindre la camra. Rglages prcis Placez la camra un endroit pratique, pointez l'objectif vers la zone d'observation. Vision nocturne La camra possde huit DEL haute intensit pour prendre des images claires dans l'obscurit. Quand le dtecteur de lumire dtecte des niveaux de lumire ambiante faibles, les DEL seront actives automatiquement. Mesure de la temprature de la pice Le capteur de temprature peut mesurer la temprature de la pice o la camra a t installe et l'indicateur de temprature de pice sera affich sur l'cran de l'unit du moniteur. Installation du moniteur Alimentation Le moniteur utilise une batterie 3,7V 1100mAh (Li-ion) ou une prise de courant secteur de la maison. Installation de la batterie
. Ouvrez le couvercle du compartiment de la batterie l'arrire du moniteur. Voir Fig. 4. 1 2. Insrez la batterie avec la partie mtallique faisant au compartiment de la batterie. Voir Fig. 4. 3. Fermez le couvercle du compartiment de la batterie et vrifiez qu'il est bien ferm. 4. Appuyez sur le bouton ALIMENTATION
/ ACTIVATION/DSACTIVATION sans arrter pendant environ 3 secondes pour allumer le moniteur. VIDO Voir Fig. 4. Remarque 1: Lorsque l'alimentation est suffisante, le voyant "Alimentation" est allum (en vert) ; lorsque la batterie est faible, le voyant DEL rouge commence clignoter. Remarque 2: Appuyez sur le bouton ALIMENTATION sans arrter
/
ACTIVATION/DSACTIVATION VIDO pendant environ 3 secondes pour teindre le moniteur. 1.2 1.3 1.4 2 2.1 10 2.2 2.3 2.4 Utilisation du courant secteur 1. Branchez un cot de ladaptateur d'alimentation fourni sur une prise de courant et lautre cot sur la prise de la camra. Voir Fig. 5. Remarque : Utilisez l'adaptateur indiqu SORTIE : 6V DC avec le moniteur. 2. Appuyez sur le bouton ALIMENTATION /
ACTIVATION/DSACTIVATION sans arrter pendant environ 3 secondes pour allumer le moniteur. VIDO Voir Fig. 5. Remarque 1: Lors de l'allumage du moniteur, la DEL "Alimentation"
s'allumera (en vert). Remarque 2: "Hors de porte" s'affichera sur l'cran LCD si le moniteur dpasse la porte (supprimer liaison). Remarque 3: Appuyez sur le bouton ALIMENTATION /
ACTIVATION/DSACTIVATION VIDO environ 3 secondes pour teindre le moniteur. sans arrter pendant Fonction tlcommande du moniteur Le moniteur peut contrler le mouvement de la camra. La tte de la camra peut tourner en haut, en bas, gauche et droite. Appuyez sur les boutons haut ou bas sur le moniteur pour relever ou abaisser la camra. Appuyez sur les boutons gauche ou droite sur le moniteur pour orienter la camra gauche ou droite. Voir Fig. 6. Remarque 1: En plus des mouvements de camra manuels, la camra peut aussi suivre des objets avec la fonction de suivi automatique. Le suivi automatique peut tre activ ou dsactiv dans le menu. Remarque 2: L'audio sera coup lorsque le moteur sera en rotation. Fonction de zoom avant Appuyez sur le bouton Zoom/OK une fois pour un zoom 2X de l'image et appuyez nouveau pour revenir une vue normale. Voir Fig. 7. Remarque : Lorsque la fonction de zoom est active, le suivi automatique sera dsactiv jusqu' ce que l'utilisateur dzoome. Activer/dsactiver la fonction vido 1. Appuyez sur et maintenez enfonc le bouton d'alimentation et activation ou dsactivation de la vido pendant moins d'une seconde sur le moniteur pour activer/dsactiver la fonction vido. Ceci teindra l'cran, mais la DEL de vido teinte restera claire (vert) pour rappeler l'utilisateur que la fonction vido est dsactive. Voir Fig. 8. 2. Si vous souhaitez seulement entendre votre bb, appuyez sur le bouton d'activation/ dsactivation de la vido pour teindre l'cran. Appuyez 11 2.5 2.6 2.7 3 3.1 3.2 3.3 3.4 12 Rglage du volume 1. Appuyez sur le bouton de configuration du volume pour accder la configuration du volume. Voir Fig. 9. 2. Appuyez sur les boutons haut ou bas pour ajuster le niveau de volume, puis sur le bouton OK pour confirmer le rglage. Fig. 9. Fonction de rponse Appuyez sur le bouton de rponse pour parler via l'unit de camra, l'icne s'affichera alors sur l'cran. Voir Fig. 10. Fonction de musique Vous pouvez jouer de la musique avec la camra (trois mlodies musicales). 1. Appuyez sur le bouton de musique , la camra commencera jouer la musique. Voir Fig. 11. 2. Appuyez sur le bouton de musique nouveau, la camra jouera la musique suivante. Options du menu 1. Appuyez sur le bouton menu de l'unit du moniteur pour afficher le menu sur lcran. Voir Fig. 12. 6 2. Utilisez les boutons gauche et droite pour naviguer travers le menu. 3. Appuyez sur le bouton Zoom/OK pour confirmer un paramtre. 4. Le menu principal est compos de sous-menus. Slection de camra (Choisir camra) Dans ce sous-menu, vous pouvez basculer entre plusieurs camras si les camras ont t apparies.Voir Fig. 13. Paramtre de minuteur d'alimentation( Minuteur d'alimentation ) Dans ce sous-menu, vous pouvez configurer le minuteur d'alimentation pour vous rappeler le timing. Voir Fig. 14. Paramtre temprature ( Param. temprature ) 1. Dans ce sous-menu, vous pouvez choisir l'unit de la temprature, degrs Celsius ou degrs Fahrenheit. Voir Fig. 15. 2. Vous pouvez rgler la plage de la temprature pour l'alerte de temprature. Si vous slectionnez "Alerte active" pour activer l'alerte de temprature et que la temprature est hors de la plage, un son d'avertissement sonnera sur l'unit du moniteur. Voir Fig. 15. Paramtre camra ( Paramtre camra ) Le systme vient avec une unit de camra qui a dj t apparie avec l'unit du moniteur. La fonction "Paramtres camra" permet d'utiliser un canal diffrent pour chaque unit de bb sur l'unit du moniteur. Cela est ncessaire pour configurer d'autres units de camra. 3.5 3.6 4 1. Si vous souhaitez ajouter une nouvelle camra, veuillez en choisir le nombre que vous souhaitez ajouter, puis slectionner l'icne d'ajout de camra et appuyez sur le bouton pour confirmer votre slection (Voir Fig. 16). L'cran affichera "Appuyez sur le bouton de l'appariement de l'unit bb" , appuyez alors sur le bouton d'alimentation et maintenez-le 1 seconde sur le ct de la camra au mme moment. 2. Si vous souhaitez supprimer une camra apparie, veuillez choisir le nombre de camras supprimer, puis slectionnez l'icne de suppression de camra pour supprimer la camra (Voir Fig. 16). Paramtre luminosit ( Luminosit ) Dans ce sous-menu, vous pouvez ajuster la luminosit de l'cran. Voir Fig. 17. Paramtre de suivi automatique ( Suivi automatique ) Dans le sous-menu, slectionnez Activer pour activer la fonction de suivi automatique ou Dsactiver pour la dsactiver. Lorsque la fonction de suivi automatique est active, la camra suivra les objets en mouvement dans le champ de vision de la camra. Voir Fig. Remarque 1: L'audio sera coup lorsque le moteur sera en rotation. Remarque 2: Lorsque la fonction de zoom est active, le suivi automatique 18. sera dsactiv jusqu ce que l'utilisateur dzoome. Informations de statut La barre de statut d'affichera au sommet de l'cran. Voir Fig. 19. 1. Indicateur de puissance de signal 2. Indicateur du numro de la camra 3. Indicateur d'alerte de temprature marche/arrt 4. Indicateur de temprature de la pice 5. Indicateur de zoom avant 6. Minuteur d'alimentation 7. Suivi automatique 8. Indicateur de rponse 9. Indicateur de recharge/statut de la batterie 10.Indicateur de musique 13 Guide de dpannage Vous ne recevez aucun signal. Assurez-vous que la camra et que le moniteur sont allums. Assurez-vous que les prises sont bien branchs jusqu'au fond. Si le signal est faible ou qu'il y a des interfrences. Si vous avez un four micro-ondes dans le chemin entre la camra et le moniteur, dplacez le four micro-ondes ou teignez-le. Assurez-vous que la camra et le moniteur sont une distance raisonnable l'un de l'autre (la plage est d'environ 500 pieds ou 150 mtres avec une vue directe). Si le LED d'alimentation est allum mais que seulement le signal vocal est dtect, le moniteur est peut-tre en mode d'activation vocale. Appuyez sur le bouton VOX pour allumer l'cran. Entretien et maintenance Gardez toutes les pices et les accessoires hors de la porte des enfants. Les empreintes de doigt ou de la poussire sur la surface de l'objectif peuvent affecter les performances de la camra. Evitez donc de toucher la surface de l'objectif avec les doigts. Si l'objectif est sale, utilisez un souffleur pour enlever la salet et la poussire, ou un chiffon doux et sec pour essuyer l'objectif. Gardez la camra au sec. La pluie, l'humidit et les liquides contenant des minraux peuvent endommager les circuits lectroniques. Ne pas utiliser ou ranger l'appareil dans des endroits sales ou poussireux. Ne pas ranger l'appareil dans des endroits chauds. Les tempratures leves peuvent rduire la dure de vie des appareils lectroniques et dformer ou faire fondre certains plastiques. Ne pas ranger l'appareil dans des endroits trs froids. Lorsque l'appareil se rchauffe sa temprature normale, de la bue peut se former l'intrieur, ce qui pourrait endommager les circuits lectroniques. Ne tentez pas d'ouvrir le botier. Une utilisation incorrecte de l'appareil peut lendommager. Evitez de le faire tomber ou de le cogner. Utilisez cet appareil uniquement avec la source d'alimentation fournie avec celui-ci ou en tant qu'accessoire optionnel. Ne pas surcharger les prises murales ou les rallonges lectriques, car cela risquerait de causer un incendie ou une lectrocution. Souvenez-vous que vous utilisez les ondes publiques lorsque vous utilisez cet appareil et que l'audio et la vido peut tre reue sur d'autres appareils rcepteurs fonctionnant sur 2,4 Ghz. Les conversation dans les pices prs de la camra peuvent tre diffuses. Pour protger votre vie prive, teignez toujours la camra lorsque vous ne voulez pas l'utiliser. 14 Suivez les astuces suivantes de scurit Pour protger contre les blessures ou la mort cause des cordons du moniteur de bb :
Assurez-vous que l'unit de bb et que le cordon de l'adaptateur secteur sont hors de la porte des bbs, par au moins 3 pieds (1 mtre). Remarque: Cela est important mme si votre bb ne peut pas encore marcher ou se dplacer. 3 pieds
(1 mtre) Cble d'adaptateur unit du bb 3 pieds
(1 mtre) Utilisez un moniteur de bb sans fil pour viter le risque d'tranglement. N'utilisez jamais des cordons d'extension avec les adaptateurs lectriquess. Utilisez uniquement les adaptateurs lectriques fournis. Cet lment est conforme aux dispositions et aux termes spcifiques de la Directive 1999/5/EC. 15 Contenido del paquete Una cmara Un monitor Dos adaptadores de alimentacin Pila para el monitor (3,7 V 1100 mAh, de iones de litio) Dos abrazaderas de cables Un tornillo y un taco para pared Este Manual del usuario Esquema del producto Cmara (Fig. 1) 1. Sensor luminoso 2. Micrfono 3. Objetivo 4. LED de infrarrojos 5. Altavoz 6. Enchufe del adaptador de alimentacin 7. Botn de encendido y asociacin 8. Antena 9. Sensor de temperatura 10. LED del indicador de alimentacin Monitor (Fig. 2) 1. Pantalla LCD 2. Botn Izquierda 3. Botn Arriba 4. Botn Zoom/Aceptar 5. Botn Derecha 6. Botn Abajo 7. Altavoz 8. Micrfono 9. LED del indicador de alimentacin 10. Indicador LED de DESACTIVACIN de vdeo 11. LED del indicador de volumen 12. Botn Encendido/ACTIVACIN Y DESACTIVACIN de vdeo 13. Botn de seleccin de msica 14. Botn de configuracin de volumen 15. Botn Intercomunicador 16. Botn Men 17. Compartimento de la batera 18. Soporte 19. Enchufe del adaptador de alimentacin L O A P S E 17 Configuracin 1 1.1 Configuracin de la cmara Fuente de alimentacin - Utilizar la alimentacin de CA 1. Enchufe un extremo del adaptador de alimentacin suministrado en una toma de corriente de la pared y el otro extremo en la parte posterior de la cmara. Vea la Fig. 3. Nota : utilice el adaptador denominado SALIDA: 6 VCC con la cmara. 2. Presione el botn de encendido y mantngalo presionado durante 3 segundos aproximadamente para encender la cmara. El indicador LED de la cmara se iluminar en verde claro. Vea la Fig. 3. Nota : presione el botn de encendido y mantngalo presionado unos 3 segundos para apagar la cmara. Enfoque Coloque la cmara en una ubicacin cmoda, apuntando con el objetivo hacia el rea de observacin. Visin nocturna La cmara tiene ocho LED de alta intensidad para capturar imgenes en la oscuridad. Cuando el sensor luminoso detecte bajos niveles de luz ambiental, los LED se activarn automticamente. Medicin de la temperatura ambiente El sensor de temperatura puede medir la temperatura ambiente desde la cmara y el indicador de temperatura ambiente se mostrar en la pantalla de la unidad del monitor. Configuracin del monitor Fuente de alimentacin El monitor utiliza pilas de iones de litio de 3,7 V 1100 mAh o la alimentacin de CA domstica. Insertar las pilas 1. Abra la tapa del compartimento de las pilas en la parte posterior del monitor. Vea la Fig. 4. 2. Inserte la pila con la parte metlica orientada hacia el compartimento de las pilas. Vea la Fig. 4. 3. Cierre la tapa del compartimento de las pilas y asegrese de que queda bloqueado. 4. Presione el botn de encendido/
ACTIVACIN Y DESACTIVACIN de vdeo y mantngalo presionado durante 3 segundos aproximadamente para encender el monitor. Vea la Fig. 4. Nota 1: cuando el nivel de las pilas sea suficiente, el indicador LED
"Alimentacin" se iluminar (verde claro); cuando el nivel de las pilas sea bajo, el LED rojo comenzar a parpadear. Nota 2: presione el botn de encendido/
ACTIVACIN Y DESACTIVACIN de y mantngalo presionado unos 3 segundos para apagar el monitor. vdeo 1.2 1.3 1.4 2 2.1 18 Uso de la alimentacin de CA 1. Enchufe un extremo del adaptador de alimentacin suministrado en una toma de corriente de la pared y el otro extremo en el monitor. Vea la Fig. 5. Nota : utilice el adaptador denominado SALIDA: 6 VCC con el monitor. 2. Presione el botn de encendido/
ACTIVACIN Y DESACTIVACIN de vdeo y mantngalo presionado durante 3 segundos aproximadamente para encender el monitor. Vea la Fig. 5. de vdeo ACTIVACIN Y DESACTIVACIN y mantngalo presionado unos 3 segundos para apagar el monitor. Nota 1: cuando el monitor se encienda, el LED "Alimentacin" se iluminar
(luz verde). Nota 2: "Fuera de intervalo" se iluminar en la pantalla LCD si el monitor supera el intervalo (desvincular). Nota 3: presione el botn de encendido/
Funcin del mando a distancia del monitor El monitor puede controlar el movimiento de la cmara. La cmara tiene la capacidad de girar hacia arriba, hacia abajo, hacia la derecha y hacia la izquierda. Presione los botones Arriba o Abajo del monitor para mover la cmara hacia arriba o hacia abajo. Presione los botones Izquierda o Derecha del monitor para mover la cmara hacia la izquierda o hacia la derecha. Vea la Fig. 6. Nota 1: adems del movimiento manual de la cmara, est tambin puede realizar un seguimiento a objetos mviles mediante la funcin de seguimiento automtico. La funcin Seguimiento automtico se puede habilitar o deshabilitar en el men. Nota 2: el audio se silenciar cuando el motor gire. Funcin de ampliacin de zoom Presione el botn Zoom/Aceptar del monitor una vez para aplicar un zoom 2X a la imagen; vuelva a presionarlo para volver a la vista normal. Vea la Fig. 7. Nota : cuando la funcin de ampliacin est habilitada, la funcin de seguimiento automtico se deshabilitar hasta que el usuario aplique la funcin de reduccin. Funcin de ACTIVACIN Y DESACTIVACIN de vdeo 1. Presione sin soltar el botn Encendido/ACTIVACIN Y DESACTIVACIN de vdeo durante menos de un segundo del monitor para ACTIVAR Y DESACTIVAR la funcin de vdeo. Esta accin APAGAR la pantalla pero el LED DESACTIVACIN DE VDEO permanecer ENCENDIDO (verde) para recordar al usuario que la funcin DESACTIVACIN de vdeo est habilitada. Consulte la figura 8. 2. Si solamente desea escuchar a su beb, presione el botn ACTIVACIN Y DESACTIVACIN de vdeo del monitor para apagar la pantalla. Presione de nuevo el botn para encender la pantalla. 19 2.2 2.3 2.4 Configuracin del volumen 1. Presione el botn de configuracin de volumen para entrar en la configuracin del volumen. Vea la Fig. 9. 2. Presione los botones Arriba o Abajo para ajustar el nivel de volumen y, a continuacin, presione el botn Aceptar para confirmar la configuracin. Fig. 9. Funcin de intercomunicador Presione el botn de intercomunicador para hablar a travs de la unidad de la cmara; se mostrar en la pantalla el icono . Vea la Fig. 10. Funcin de msica Puede reproducir msica con la cmara (tres piezas de msica). 1. Vea la Fig 2. siguiente cancin. Presione el botn de msica y la cmara comenzar a reproducirla. Presione el botn de msica de nuevo y la cmara comenzar a reproducir la
. 11. Opciones del men 1. Presione el botn de men de la unidad del monitor para mostrar el men principal en la pantalla. Vea la Fig. 12. 6 2. Utilice los botones Izquierda y Derecha para desplazarse por los mens. 3. Presione el botn Zoom/Aceptar para confirmar una configuracin. 4. El men principal contiene submens. Seleccin de cmara (seleccionar cmara) En este submen puede cambiar entre varias cmaras si estas estn asociadas. Vea la Fig. 13. Configuracin del temporizador de fuentes
(temporizador de fuentes) En este submen puede configurar el temporizador de fuentes para recordarle la temporizacin. Vea la Fig. 14. Configuracin de la temperatura (configuracin de la temp.) 1. En este submen puede elegir la unidad de temperatura entre grados centgrados o grados fahrenheit. Vea la Fig. 15. 2. Puede establecer el intervalo de temperatura de la alerta. Si selecciona "Alerta activada" para activar la alerta de temperatura y la temperatura se encuentra fuera del intervalo, se emitir un sonido de advertencia desde la unidad del monitor. Vea la Fig. 15. 2.5 2.6 2.7 3 3.1 3.2 3.3 20 3.4 3.5 3.6 4 Configuracin de la cmara (configuracin de la cmara) El sistema viene con una unidad de la cmara que ya se ha asociado con la unidad del monitor. La funcin "Configuracin de la cmara" proporciona a cada unidad del beb un canal independiente en la unidad del monitor. Esto es necesario para configurar las unidades de cmaras adicionales. 1. Si desea aadir una cmara nueva, elija el nmero de cmaras que desee aadir y, a continuacin, seleccione el icono Aadir cmara y presione el botn para confirmar la seleccin (vea la Fig. 16). La pantalla mostrar "Presione el botn de asociacin de la unidad del beb" y, a continuacin, mantenga presionado el botn de encendido durante menos de 1 segundo en el lateral de la cmara simultneamente. 2. Si desea eliminar una cmara asociada, elija el nmero de cmaras que desea eliminar y, a continuacin, seleccione el icono Eliminar cmara para eliminarla (vea la Fig. 16). Configuracin de brillo (brillo) En este submen puede ajustar el brillo de la pantalla. Vea la Fig. 17. Configuracin de seguimiento automtico (seguimiento automtico) En el submen, seleccione "Activar" o "Desactivar" para habilitar o deshabilitar, respectivamente, la funcin de seguimiento automtico. Cuando la funcin de seguimiento automtico est habilitada, la cmara realizar un seguimiento a objetos mviles en el mbito de visualizacin de la cmara. Consulte la Fig. Nota 1: el audio se silenciar cuando el motor gire. Nota 2: cuando la funcin de ampliacin est habilitada, la funcin de seguimiento automtico se deshabilitar hasta que el usuario aplique la funcin de reduccin. 18 Informacin de estado La barra de estado se mostrar en la parte superior de la pantalla. Vea la Fig. 19. 1. Indicador de potencia de la seal 2. Indicador de nmero de cmara 3. Indicador de activacin y desactivacin de alerta de temperatura 4. Indicador de temperatura de la habitacin 5. Indicador de ampliacin de zoom 6. Temporizador de fuente 7. Seguimiento automtico 8. Indicador Intercomunicador 9. Estado de la batera/Indicador de carga 10.Indicador de msica 21 Resolucin de problemas Asegrese de que la cmara y el monitor estn encendidos. Asegrese de que los enchufes de alimentacin estn insertados por completo. No recibe ninguna seal en absoluto Si la seal es deficiente o hay interferencias Si hay un microondas en uso entre la cmara y el monitor, retrelo o apguelo. Asegrese de que la cmara y el monitor estn dentro del alcance uno del otro:
alcance de aproximadamente 150 metros (500 pies) en una lnea clara de visin. Si el LED de alimentacin est encendido pero solo se detecta la entrada de seal de voz, el monitor puede estar en el modo de voz. Presione el botn VOX para encender la pantalla. Cuidado y mantenimiento Mantenga todas las piezas y los accesorios fuera del alcance de los nios. Las huellas digitales o la suciedad en la superficie del objetivo pueden afectar negativamente a las prestaciones de la cmara. Evite tocar la superficie del objetivo con los dedos. Si el objetivo est sucio, utilice un ventilador para soplar la suciedad y el polvo, o un pao seco para limpiar el objetivo. Mantenga la cmara seca. La lluvia, la humedad y otros lquidos contienen minerales que pueden corroer los circuitos electrnicos. No utilice ni almacene los dispositivos en reas con polvo y sucias. No almacene los dispositivos en reas donde la temperatura sea elevada. Las altas temperaturas pueden reducir la vida til de los dispositivos electrnicos, y deformar o derretir ciertos plsticos. No almacene los dispositivos en zonas donde la temperatura sea baja. Cuando el sistema se calienta (hasta su temperatura normal), se puede formar humedad dentro de la carcasa, lo que puede daar las placas del circuito. No intente abrir la carcasa. El manejo del dispositivo por personas no expertas puede daar el sistema. Evite las cadas o fuertes descargas. Utilice este producto solo con la fuente de alimentacin incluida o proporcionada como accesorio. No sobrecargue las tomas elctricas o extensiones, ya que esto puede provocar un incendio o un cortocircuito. Recuerde que utiliza ondas de radio pblicas al utilizar el sistema, y que el sonido y el vdeo se pueden transmitir a otros dispositivos de recepcin de 2,4 GHz. Las conversaciones, incluso desde las habitaciones cercanas a la cmara, se pueden transmitir. Para proteger la privacidad de su hogar, apague la cmara cuando no est en uso. 22 Consejos de seguridad Para evitar la muerte y las lesiones asociadas con los cables del monitor para bebs:
Asegrese de que la unidad del beb y los cables del adaptador de CA siempre estn fuera del alcance del beb, al menos a 1 metro. Nota: es importante incluso si su beb an no se pone de pie o se mueve. 1 metro
(3 pies) cable del adaptador unidad del beb 1 metro
(3 pies) Utilice un monitor para bebs inalmbrico para evitar el riesgo de estrangulamiento. Nunca utilice cables de extensin con adaptadores de CA. Utilice solo los adaptadores de CA proporcionados. Este artculo est en conformidad con los requisitos esenciales y otras disposiciones pertinentes de la Directiva 1999/5/CE. 23 Lieferumfang Eine Kamera Ein Monitor Zwei Netzteile Akku fr Monitor (Lithium-Ionen-Akku, 3,7 V, 1100 mAh) Zwei Kabelklemmen Eine Schraube und ein Dbel Diese Bedienungsanleitung Produktbersicht Kamera (Abb. 1) 1. Lichtsensor 2. Mikrofon 3. Objektiv 4. Infrarot-LEDs 5. Lautsprecher 6. Netzteilstecker 7. Ein/Aus-/Kopplungstaste 8. Antenne 9. Temperatursensor 10. Betriebsanzeige-LED Monitor (Abb. 2) 1. LCD-Bildschirm 2. Linkstaste 3. Aufwrtstaste 4. Zoom/OK-Taste 5. Rechtstaste 6. Abwrtstaste 7. Lautsprecher 8. Mikrofon 9. Betriebsanzeige-LED 10. Video-aus-LED 11. Lautstrkeanzeige-LEDs 12. Netz-/Video ein/aus-Taste 13. Musikauswahl-Taste 14. Lautstrkeeinstelltaste 15. Gegensprech-Taste 16. Mentaste 17. Akkufach 18. Halter 19. Netzteilstecker H C S T U E D 25 Einrichtung 1 1.1 Kameraeinrichtung Stromversorgung ber Netzstrom 1. Schlieen Sie ein Ende des mitgelieferten Netzteils an eine Steckdose an, verbinden Sie das andere Ende mit dem Anschluss an der Rckseite der Kamera. Siehe Abb. 3. Hinweis: Verwenden Sie das mit OUTPUT: 6V DC gekennzeichnete Netzteil mit der Kamera. 2. Halten Sie die Ein-/Austaste zum Abschalten der Kamera etwa 3 Sekunden gedrckt. Die LED an der Kamera leuchtet auf (grnes Licht). Siehe Abb. 3. Hinweis: Halten Sie die Ein-/Austaste zum Abschalten der Kamera etwa 3 Sekunden gedrckt. Feineinstellung Bringen Sie die Kamera in eine geeignete Position, richten Sie das Objektiv auf den berwachungsbereich. Nachtsicht Die Kamera hat acht LEDs mit hoher Intensitt, mit denen Sie auch bei Dunkelheit klare Bilder aufnehmen knnen. Wenn der Lichtsensor geringe Umgebungsbeleuchtung erkennt, werden die LEDs automatisch aktiviert. Raumtemperaturmessung Der Temperatursensor kann die Raumtemperatur am Aufstellungsort der Kamera messen; die Raumtemperaturanzeige erscheint am Bildschirm der Monitoreinheit. Monitoreinrichtung Stromversorgung Der Monitor funktioniert mit einem Lithium-Ionen-Akku (3,7 V, 1100 mAh) oder Netzstrom. Akku einlegen 1. ffnen Sie die Akkufachabdeckung an der Rckseite des Monitors. Siehe Abb. 4. 2. Legen Sie den Akku so ein, dass das Metall in Richtung des Akkufachs zeigt. Siehe Abb. 4. 3. Schlieen Sie die Akkufachabdeckung; achten Sie darauf, dass sie sicher verschlossen ist. 4. Halten Sie die Netz-/
-Taste zum Einschalten des Monitors Video ein/aus etwa 3 Sekunden gedrckt. Siehe Abb. 4. Hinweis 1: Bei ausreichender Akkuleistung leuchtet die Betriebsanzeige-LED
(grn); wenn der Akkustand gering ist, beginnt die rote LED zu blinken. Hinweis 2: Halten Sie die Netz-/
-Taste zum Abschalten des Monitors etwa 3 Sekunden gedrckt. Video ein/aus 1.2 1.3 1.4 2 2.1 26 2.2 2.3 2.4 Netzstrom verwenden 1. Schlieen Sie ein Ende des mitgelieferten Netzteils an eine Steckdose an, verbinden Sie das andere Ende mit dem Monitor. Siehe Abb. 5. Hinweis : Verwenden Sie das mit OUTPUT: 6V DC gekennzeichnete Netzteil mit dem Monitor. 2. Halten Sie die Netz-/
-Taste zum Einschalten des Monitors Video ein/aus etwa 3 Sekunden gedrckt. Siehe Abb. 5. Video ein/aus Hinweis 1: Wenn der Monitor eingeschaltet wird, leuchtet die Betriebsanzeige-
LED (grn). Hinweis 2: "Out of Range (Auer Reichweite)" wird am LCD-Bildschirm angezeigt, wenn der Monitor die Reichweite berschreitet (Verbindungstrennung). Hinweis 3: Halten Sie die Netz-/
-Taste zum Abschalten des Monitors etwa 3 Sekunden gedrckt. Monitorfernbedienungsfunktion Der Monitor kann die Kamerabewegung steuern. Der Kamerakoch kann sich nach oben, unten, rechts und links drehen. Drcken Sie zum Auf- oder Abwrtsbewegen der Kamera die Aufwrts- oder Abwrtstate am Monitor. Drcken Sie zur Bewegung der Kamera nicht links oder rechts die Links- oder Rechtstate am Monitor. Siehe Abb. 6. Hinweis 1: Neben manuellen Kamerabewegungen kann die Kamera per Auto-
Die Auto-Verfolgung knnen Sie im Men ein-und ausschalten. Verfolgungsfunktion auch bewegliche Objekte verfolgen. Hinweis 2: Der Ton wird stummgeschaltet, wenn der Motor arbeitet. Vergrern-Funktion Drcken Sie die Zoom/OK-Taste am Monitor zur 2fachen Vergrerung des Bildes einmal, durch erneute Bettigung gelangen Sie zur normalen Ansicht zurck. Siehe Abb. 7 Hinweis : Bei aktiver Zoom-Vergrerung wird die Auto-Verfolgung abgeschaltet, bis das Bild wieder in der Originalgre angezeigt wird. Video-ein/aus-Funktion 1. Drcken Sie zum Umschalten zur Video-ein/aus-Funktion kurz auf die Netz-
/Video ein/aus-Taste am Monitor. Dabei wird der Bildschirm abgeschaltet, die Video-aus-LED leuchtet weiter grn und erinnert Sie daran, dass die Video-aus-
Funktion aktiv ist. Schauen Sie sich bitte Abbildung 8 an. 2. Wenn Sie Ihr Baby lediglich hren mchten, schalten Sie den Bildschirm mit der Video-ein/aus-Taste am Monitor ab. Zum Wiedereinschalten des Bildschirms drcken Sie die Taste noch einmal. 27 2.5 2.6 2.7 3 3.1 3.2 3.3 3.4 28 Lautstrkeeinstellung 1. Drcken Sie zum Aufrufen der Lautstrkeeinstellung die Lautstrkeeinstelltaste . Siehe Abb. 9. 2. Passen Sie die Lautstrke mit der Aufwrts- oder Abwrtstaste an, drcken Sie zum Besttigen der Einstellung die OK-Taste . Abb. 9. Gegensprechfunktion Drcken Sie die Gegensprech-Taste , wenn Sie direkt ber die Kamera sprechen mchten; das -Symbol wird am Bildschirm angezeigt. Siehe Abb. 10. Musikfunktion Sie knnen Musik ber die Kamera wiedergeben (drei Musikstcke). 1. Drcken Sie zur Wiedergabe der Musik die Musiktaste Siehe Abb. 11. 2. Durch erneutes Drcken der Musiktaste gibt die Kamera das nchste Lied wieder. Menoptionen 1. Drcken Sie zur Einblendung des Hauptmens am Bildschirm die Mentaste . Siehe Abb. 12. 6 2. Navigieren Sie mit der Links- und Rechtstaste durch das Men. 3. Drcken Sie zum Besttigen einer Einstellung die Zoom/OK-Taste . 4. Das Hauptmen enthlt Untermens. Kameraauswahl In diesem Untermen knnen Sie zwischen mehreren Kameras umschalten, falls die Kameras gekoppelt wurden. Siehe Abb. 13. Ftterungstimer-Einstellung (Ftterungstimer) In diesem Untermen knnen Sie zur Erinnerung den Ftterungstimer einstellen. Siehe Abb. 14 Temperatureinstellung (Temp.-Einst.) 1. In diesem Untermen knnen Sie die Temperatureinheit whlen: Grad Celsius oder Grad Fahrenheit. Siehe Abb. 15. 2. Sie knnen den Temperaturbereich des Temperaturalarms einstellen. Falls Sie zum Aktivieren des Temperaturalarms "Alert On (Alarm ein)" whlen und sich die Temperatur auerhalb des Bereichs befindet, gibt der Monitor einen Warnton aus. Siehe Abb. 15. Kameraeinstellung Das System wird mit einer Kamera geliefert, die bereits mit dem Monitor gekoppelt wurde. Die "Cam Setting (Kameraeinstellung)" -Funktion teilt jeder Babyeinheit einen separaten Kanal an der Monitoreinheit zu. Dies ist zur Konfiguration zustzlicher Kameras erforderlich. 1. Falls Sie eine neue Kamera hinzufgen mchten, whlen Sie bitte die Anzahl Kameras, die Sie hinzufgen mchten; whlen Sie dann das Kamera-
hinzufgen-Symbol und drcken die -Taste zum Besttigen Ihrer Auswahl (siehe Abb. 16). Der Bildschirm zeigt "Press the pairing button on the Baby unit
(Kopplungstaste an der Babyeinheit drcken)" , halten Sie dann bitte gleichzeitig auch die Ein-/Austaste an der Kamera weniger als 1 Sekunde gedrckt. 2. Falls Sie eine gekoppelte Kamera lschen mchten, whlen Sie bitte die Anzahl Kameras, die Sie lschen mchten; whlen Sie dann zum Lschen der Kamera das Kamera-lschen-Symbol (siehe Abb. 16). VHelligkeitseinstellung (Helligkeit) In diesem Untermen knnen Sie die Bildschirmhelligkeit anpassen. Siehe Abb. 17. Auto-Verfolgungsfunktion (Auto-Verfolgung) Im Untermen schalten Sie die Auto-Verfolgung ein und aus. Bei eingeschalteter Auto-Verfolgung verfolgt die Kamera bewegliche Objekte in ihrem Erfassungsbereich. Schauen Sie sich dazu Abb. Hinweis 1: Der Ton wird stummgeschaltet, wenn der Motor arbeitet. Hinweis 2: Bei aktiver Zoom-Vergrerung wird die Auto-Verfolgung abgeschaltet, bis das Bild wieder in der Originalgre angezeigt wird. 18. Statusinformationen Die Statusleiste wird im oberen Bereich des Bildschirms angezeigt. Siehe Abb. 19. 3.5 3.6 4 1. Signalstrke 2. Kameranummer 3. Temperaturalarm ein/aus 4. Raumtemperatur 5. Vergrern 6. Ftterungstimer 7. Auto-Verfolgung 8. Gegensprechfunktion 9. Akkustatus/Ladeanzeige 10.Musik 29 Problemlsung Pflege und Wartung Stellen Sie sicher, dass Kamera und Monitor eingeschaltet sind. Sie empfangen keinerlei Signale Prfen Sie, ob die Netzstecker vollstndig eingesteckt sind. Bei schwachem Signal oder Signalstrungen Falls sich eine Mikrowelle im Pfad zwischen Kamera und Monitor befindet, stellen Sie die Mikrowelle an einen anderen Ort bzw. schalten Sie sie aus. Stellen Sie sicher, dass sich Kamera und Monitor innerhalb der untersttzten Reichweite zueinander befindet (ca. 150 Meter in direkter Sichtverbindung). Falls die Betriebsanzeige-LED leuchtet, jedoch nur ein Audiosignaleingang erkannt wird, befindet sich der Monitor mglicherweise im geruschaktivierten Modus. Drcken Sie die VOX-Taste zum Einschalten des Bildschirms. Bewahren Sie alle Teile und smtliches Zubehr auerhalb der Reichweite von Kindern auf. Fingerabdrcke und Schmutz an der Linsenoberflche knnen sich erheblich auf die Kameraleistung auswirken. Achten Sie darauf, die Linsenoberflche nicht mit Ihren Fingern zu berhren. Sollte die Linse schmutzig werden, beseitigen Sie Schmutz und Staub mit einem Druckluftreiniger oder einem weichen, trockenen Tuch. Halten Sie die Kamera trocken. Niederschlag, Feuchtigkeit und andere Flssigkeiten mit Mineralien lassen elektronische Schaltkreise korrodieren. Verwenden oder lagern Sie das Produkt nicht an staubigen, schmutzigen Orten. Bewahren Sie das Produkt nicht an heien Orten auf. Hohe Temperaturen knnen die Lebenszeit elektronischer Gerte verkrzen und bestimmte Kunststoffteile verformen oder schmelzen lassen. Bewahren Sie das Produkt nicht an sehr kalten Orten auf. Wenn sich das System erwrmt (auf normale Betriebstemperatur) kann sich Feuchtigkeit im Inneren des Gehuses bilden und die elektronische Schaltkreise beschdigen. Versuchen Sie nicht, das Gehuse zu ffnen. Unsachgeme Handhabung des Gertes kann das System beschdigen. Lassen Sie das Gert nicht fallen, setzen Sie es keinen starken Erschtterungen aus. Betreiben Sie das Produkt nur mit dem mitgelieferten oder als Zubehr bereitgestellten Netzteil. berlasten Sie Steckdosen oder Verlngerungskabel nicht, da dies Brand-
und Stromschlaggefahr bergen kann. Denken Sie daran, dass Sie beim Einsatz des Systems ffentliche Funkwellen verwenden und Ton und Video auf andere 2,4-GHz-Empfangsgerte bertragen werden knnen. Es knnen sogar Gesprche von Orten in der Nhe der Kamera bertragen werden. Schalten Sie die Kamera zum Schutz Ihrer Privatsphre immer aus, wenn Sie sie nicht verwenden. 30 Sicherheitstipps befolgen So vermeiden Sie (lebensgefhrliche) Verletzungen in Verbindung mit den Kabeln des Babymonitors:
Achten Sie darauf, dass sich die Kabel von Babyeinheit und Netzteil immer auerhalb der Reichweite des Babys befinden (mindestens 1 Meter entfernt). Hinweis: Dies ist auch dann zu beachten, wenn Ihr Baby noch nicht stehen oder sich bewegen kann. 1 Meter Netzteilkabel Babyeinheit 1 Meter Verwenden Sie zur Vermeidung von Strangulierungsgefahr einen kabellosen Babymonitor. Verwenden Sie niemals Verlngerungskabel in Verbindung mit Netzteilen. Verwenden Sie nur die mitgelieferten Netzteile. Dieses Gert stimmt mit den grundlegenden Anforderungen und anderen relevanten Bestimmungen der Richtlinie 1999/5/EG berein. 31 Contenuti della confezione Una telecamera Un monitor Due adattatori di corrente Batterie per il monitor (ioni di Litio, 3.7V, 1100mAh) Due fermacavo Una vite e una grappa Questo Manuale d'uso Layout del prodotto Videocamera (Fig. 1) 1. Sensore luci 2. Microfono 3. Obiettivo 4. LED a infrarossi 5. Altoparlante 6. Spina adattatore di corrente 7. Tasto di alimentazione/associazione 8. Antenna 9. Sensore temperatura 10. LED di alimentazione Monitor (Fig. 2) 1. Schermo LCD 2. Tasto sinistro 3. Tasto su 4. Tasto di zoom/OK 5. Tasto destro 6. Tasto gi 7. Altoparlante 8. Microfono 9. LED di alimentazione 10. LED indicatore Video OFF 11. LED volume 12. Tasto di alimentazione/Video ON/OFF 13. Tasto selezione musica 14. Tasto di impostazione volume 15. Tasto vivavoce 16. Tasto menu 17. Vano batteria 18. Supporto 19. Spina adattatore di corrente O N A L A T I I 33 Installazione 1 1.1 Impostazione della videocamera Alimentazione - Uso dell'alimentazione CA 1. Inserire un'estremit dell'adattatore di alimentazione in dotazione in una presa di corrente e l'altra estremit nella parte posteriore della videocamera. Vedere la Fig. 3. Nota : Con questa videocamera, usare l'adattatore con l'etichetta OUTPUT: 6V DC. 2. Premere il tasto POWER e tenerlo premuto per circa 3 secondi per accendere la videocamera. Il LED della videocamera si accende (spia verde). Vedere la Fig. 3. Nota : Premere il tasto POWER e tenerlo premuto per circa 3 secondi per spegnere la videocamera. Sintonia fine Posizionare la videocamera in un luogo comodo e puntare l'obiettivo verso l'area di osservazione. Visione notturna La videocamera dispone di otto LCD ad alta intensit per acquisire immagini nitide al buio. Quando il sensore luci rileva bassi livelli di luce ambientale, gli LCD si attivano automaticamente. Misurazione della temperatura ambientale Il sensore di temperatura in grado di misurare la temperatura ambientale sul lato della videocamera e l'indicatore della temperatura ambientale viene visualizzato sullo schermo del monitor. Impostazione del monitor Alimentazione Il monitor usa una batteria a 3,7 V 1100 mAh (ioni di litio) o la corrente CA domestica. Inserimento della batteria 1. Aprire il coperchio del vano batterie sulla parte posteriore del monitor. Vedere la Fig. 4. 2. Inserire la batteria con la parte metallica rivolta verso il vano batteria. Vedere la Fig. 4. 3. Chiudere il coperchio del vano batteria e assicurarsi che sia bloccato saldamente. 4. Premere il tasto di alimentazione
/Video ON/OFF e tenerlo premuto per circa 3 secondi per accendere il monitor. Vedere la Fig. 4. Nota 1: Se l'alimentazione sufficiente, il LED di "alimentazione" si accende
(spia verde); se la batteria quasi scarica, il LED rosso inizia a lampeggiare. Nota 2: Premere il tasto di alimentazione circa 3 secondi per spegnere il monitor. e tenerlo premuto per
/Video ON/OFF 1.2 1.3 1.4 2 2.1 34 2.2 2.3 2.4 Uso di alimentazione CA 1. Inserire un'estremit dell'adattatore di alimentazione in dotazione in una presa di corrente e l'altra estremit nel monitor. Vedere la Fig. 5. Nota : Con questo monitor, usare l'adattatore con l'etichetta OUTPUT: 6V DC. 2. Premere il tasto di alimentazione e tenerlo premuto per
/Video ON/OFF circa 3 secondi per accendere il monitor. Vedere la Fig. 5.
/Video ON/OFF e tenerlo premuto per Nota 1: Quando si accende il monitor, il LED di "alimentazione" si accende
(spia verde). Nota 2: Sullo schermo LCD viene visualizzato "Fuori range" se il monitor non rientra nel range (scollegato). Nota 3: Premere il tasto di alimentazione circa 3 secondi per spegnere il monitor. Funzioni del telecomando del monitor Il monitor in grado di controllare il movimento della videocamera. La testa della videocamera pu ruotare verso l'alto, il basso, destra e sinistra. Premere i tasti su o gi del monitor per spostare la videocamera verso l'alto o il basso. Premere i tasti sinistro o destro del monitor per spostare la videocamera verso sinistra o destra. Vedere la Fig. 6. Nota 1: Oltre al movimento manuale della videocamera, la videocamera pu anche monitorare oggetti in movimento utilizzando la funzione di tracking automatico. Il rilevamento automatico pu essere attivato o disattivato nel menu. Nota 2: L'audio viene disattivato quando il motore gira. Funzione ingrandimento Premere una volta il tasto di zoom/OK del monitor per un ingrandimento 2X dell'immagine, quindi premere di nuovo per tornare alla visualizzazione normale. Vedere la Fig. 7. Nota : Quando si attiva la funzione di ingrandimento, il tracking automatico viene disattivato finch l'utente non riduce l'immagine. Funzione video ON/OFF 1. Tenere premuto il tasto di alimentazione/Video ON/OFF per meno di un secondo sul monitor per commutare la funzione Video ON/OFF. In tal modo si spegne lo schermo, ma il LED Video OFF rimane acceso (verde) per ricordare all'utente che la funzione Video OFF abilitata. Vedere la Fig. 8. 2. Se si desidera solo ascoltare il bambino, premere il tasto Video ON/OFF sul monitor per spegnere lo schermo. Premere di nuovo per accendere lo schermo. 35 2.5 2.6 2.7 3 3.1 3.2 3.3 3.4 36 Impostazione del volume 1. Premere il tasto di impostazione volume per accedere alla relativa impostazione. Vedere la Fig. 9. 2. Premere i tasti su o gi per regolare il livello di volume, quindi premere il tasto Ok per confermare l'impostazione. Fig. 9. Funzione vivavoce Premere il tasto vivavoce per parlare attraverso la videocamera. L'icona viene visualizzata sullo schermo. Vedere la Fig. 10. Funzione musica possibile riprodurre la musica con la telecamera (tre brani musicali). 1. Premere il tasto musica , la telecamera riprodurr la musica. Fare riferimento alla Figura 11. 2. Premere di nuovo il tasto musica , la telecamera riprodurr il brano successivo. Opzioni del menu 1. Premere il tasto menu del monitor per visualizzare il menu principale sullo schermo. Vedere la Fig. 12. 6 2. Usare i tasti sinistro e destro per navigare tra i menu. 3. Premere il tasto di zoom/OK per confermare un'impostazione. 4. Il menu principale contiene menu secondari. Selezione della videocamera (Selezione videocamera) In questo menu possibile passare tra varie videocamere, se sono state associate. Vedere la Fig. 13. Impostazione timer alimentazione (Timer alimentazione) In questo menu secondario possibile impostare il timer alimentazione come promemoria. Vedere la Fig. 14. Impostazione della temperatura (Impostazione temp.) 1. In questo menu secondario possibile scegliere l'unit di temperatura tra gradi Celsius e gradi Fahrenheit. Vedere la Fig. 15. 2. possibile impostare l'intervallo di temperatura dell'avviso temperatura. Se si seleziona "Avviso On" per attivare l'avviso temperatura e la temperatura fuori range, dal monitor viene emesso un avviso acustico. Vedere la Fig. 15. Impostazione della videocamera (Impostazione videocamera) Il sistema dispone di una videocamera gi associata al monitor. La funzione
"Impostazione videocamera" garantisce a ciascuna unit bambino un canale a parte sul monitor. Ci necessario per la configurazione di altre videocamere. 1. Per aggiungere altre videocamera, scegliere il numero di videocamere da aggiungere, quindi selezionare l'icona di aggiunta videocamera e premere il tasto per confermare la selezione (vedere la Fig. 16). Sullo schermo viene visualizzato "Premere il tasto di associazione sull'unit bambino" , quindi tenere premuto contemporaneamente il tasto di alimentazione per meno di 1 secondo sulla videocamera. 2. Per eliminare una videocamera associata, scegliere il numero di videocamere da eliminare, quindi selezionare l'icona di eliminazione della videocamera per eliminarla (vedere la Fig. 16). Impostazione di luminosit (Luminosit) In questo menu secondario possibile regolare la luminosit dello schermo. Vedere la Fig. 17. lmpostazione ( Tracking automatico ) Nel sottomenu, selezionare "Acceso" per attivare la funzione di tracking automatico o selezionare "Spento" per disattivarla. Quando si attiva la funzione di tracking automatico, la videocamera effettua il monitoraggio di oggetti in movimento all'interno del range di visualizzazione della videocamera. Vedere la Fig. Nota 1: L'audio viene disattivato quando il motore gira. Nota 2: Quando si attiva la funzione di ingrandimento, il tracking automatico viene disattivato finch l'utente non riduce l'immagine. 18
. Informazioni di stato Sulla parte superiore dello schermo viene visualizzata la barra di stato. Vedere la Fig. 19
. 3.5 3.6 4 1. Indicatore intensit di segnale 2. Indicatore numero di videocamera 3. Indicatore di avviso temperatura On/Off 4. Indicatore temperatura ambientale 5. Indicatore di ingrandimento 6. Timer alimentazione 7. Tracking automatico 8. Indicatore vivavoce 9. Indicatore di stato batteria/carica 10.Indicatore musica 37 Risoluzione dei problemi Assicurarsi che sia la fotocamera ed il monitor siano accesi. Non si riceve alcun segnale Assicurarsi che le spine siano completamente inserite nelle prese. Se il segnale scarso, o ci sono interferenze Se nel percorso tra la telecamera ed il monitor c' un forno a microonde in uso, rimuovere il forno a microonde o spegnerlo. Assicurarsi che la telecamera ed il monitor si trovino all'interno dei rispettivi campi di copertura (portata di circa 500 piedi o 150 metri di una linea di vista senza ostacoli). Se il LED di alimentazione acceso, ma rilevato solo l'ingresso del segnale vocale, il monitor pu essere in modalit di attivazione vocale. Premere il tasto VOX per accendere i monitor. Cura e manutenzione Tenere tutte le parti e gli accessori lontani dalla portata dei bambini. Impronte digitali o sporcizia sulla superficie dell'obiettivo possono influenzare negativamente sulle prestazioni della telecamera. Evitare di toccare la superficie dell'obiettivo con le dita. Se l'obiettivo sporco, usare un soffiatore per rimuovere lo sporco e la polvere, oppure usare un panno morbido e asciutto per pulire l'obiettivo. Tenere la telecamera asciutta. Pioggia, umidit e altri liquidi contengono minerali che possono danneggiare i circuiti elettronici. Non usare o conservare in aree sporche e polverose. Non conservare in ambienti caldi. Le temperature elevate possono ridurre la durata utile dei dispositivi elettronici e deformare o fondere alcune plastiche. Non conservare in ambienti molto freddi. Quando il sistema si riscalda
(al sua normale temperatura) al suo interno si pu formare della condensa che pu danneggiare le schede dei circuiti elettronici. Non tentare di aprire la copertura. Il sistema pu subire danni se maneggiato da personale non specializzato. Evitare cadute o forti impatti. Far funzionare il prodotto usando solo l'alimentatore incluso o fornito come accessorio. Non sovraccaricare le prese a muro e le prolunghe, perch si possono provocare incendi e scosse elettriche. Ricordare che, quando si usa il sistema, si usano onde radio pubbliche e audio e video possono essere trasmessi ad altri dispositivi di ricezione 2.4 GHz. Possono essere trasmesse conversazioni, anche tenute in stanze vicine alla telecamera. Per proteggere la privacy della propria casa, spegnere sempre la telecamera quando non in uso. 38 Osservare le istruzioni sulla sicurezza Per prevenire la morte e lesioni in associazione ai cavi del baby monitor:
Assicurarsi che i cavi dell'unit e dell'adattatore AC siano sempre fuori della portata del bambino, ad una distanza di almeno 3 piedi (1 metro). Nota: importante, anche se il vostro bambino non ancora in grado di stare in piedi o di muoversi autonomamente. 3 piedi
(1 metro) Cavo adattatore Baby monitor 3 piedi
(1 metro) Usare un baby monitor wireless per evitare il rischio di strangolamento. Non usare mai prolunghe con gli adattatori AC. Usare solo gli adattatori AC forniti in dotazione. Questa attrezzatura conforme ai requisiti essenziali e ad altri requisiti relativi della Direttiva 1999/5/CE. 39 408-000782-00
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2014-08-12 | 2408 ~ 2468 | DSS - Part 15 Spread Spectrum Transmitter | Change in identification of presently authorized equipment. Original FCC ID: O6LTTD-VM2501R Grant Date: 08/19/2013 |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2014-08-12
|
||||
1 | Applicant's complete, legal business name |
Amcrest Technologies LLC
|
||||
1 | FCC Registration Number (FRN) |
0021139704
|
||||
1 | Physical Address |
16727 Park Row Dr.
|
||||
1 |
Houston, Texas 77084
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
k******@emcc.de
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
ZZ2
|
||||
1 | Equipment Product Code |
FBM3502R
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
A**** R******
|
||||
1 | Title |
Director
|
||||
1 | Telephone Number |
(315)********
|
||||
1 | Fax Number |
(713)********
|
||||
1 |
a******@amcrest.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless Video Baby Monitor | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Change in identification of presently authorized equipment. Original FCC ID: O6LTTD-VM2501R Grant Date: 08/19/2013 | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power output listed is peak conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC accepted multi-transmitter procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Intertek Testing Services Taiwan Ltd.
|
||||
1 | Name |
I****** C********
|
||||
1 | Telephone Number |
886-2******** Extension:
|
||||
1 | Fax Number |
886-2********
|
||||
1 |
i******@intertek.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2408.00000000 | 2468.00000000 | 0.0730000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC