Gotham / Regular 6 PT Gotham / Light 5.5 PT JP / Normal 6 PT JP / Light 5.5 PT KR / Normal 6 PT KR / Light 5.5 PT Low Battery Charging Fully Charged USB USB VmA
, USB USB . V mA
. 103 Built-In Battery Precautions Connecting Your Device Do not attempt to replace the devices battery on your own or force open the built-in battery. Use only the official charging base to charge your device. Please make sure you have the Bluetooth feature activated on your phone. Then, open the Amazt app and follow the onscreen instructions in the app to login into an existing account(or create a new account if needed). Once logged in, pair the device with your phone by selecting into "Prole" > "Add device" > "Watch" > "Amazt Bip S". The pairing requires the identication of the device and pressing "Pair" on the watch. Install the Amazt app on your phone Search forAmazton the App Store/Google Play or scan the QR code below to download and install the app. Amazt Bip S Amazt Bip S Amazt app-
. Amazt app QR Amazt Amazt . QR , Amazt . 97 99 101 018-180359 Amazt Bip S Lite /
Amazt Bip S Lite
: Amazt Bip S Lite
: A
: Bluetooth . BLE
: V mA
: -MHz
: dBm
: ATMm
: Android .iOS .OS
. Amazt Bip S Lite / Amazt Bip S Lite
: Amazt Bip S Lite
: A
: . BLE
: V mA()
: -MHz
: dBm
: C~C
: ATM
: Android . iOS . OS 105 107 Amazt
: en.amazt.com
: support.amazt.com
: support@amazt.com Amazt .
: en.amazt.com
: support.amazt.com
: support@amazt.com 98 100 102 104 106 108 32 User Manual 1 14 Manual de usuario 24 P Manuale Utente 39 Manuel utilisateur 47 Bedienungsanleitung 55
63 Instrukcja Obsugi 76 Manual do usurio 84 97 103 Kullanm Klavuzu 109 117 125 Charging Your Watch Place the watch on the charging cradle as shown in the gure, and plug the charging cable into a USB power adapter or USB port. Please use a power adapter that is rated 5V and above 500mA. 1 3 5 7 9 11 13 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1 . This device may not cause harmful interference, and 2 . This device must accept any interference received, including the interference that may cause undesired operation. Regulatory Notice FCC ID: 2AC8UA1823 Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferences in a residential installation. This equipment generates, uses, and may radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures:
Any changes or modications that are not expressly approved by the party responsible for the compliance may void the users authority to operate the equipment.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. ThedevicehasbeenevaluatedtomeetgeneralRFexposurerequirement.Thedevice canbeusedinportable exposureconditionwithoutrestriction. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
( 1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired operation if the device. IC: 21806-A1823 CAN ICES-3(B)/NMB-3(B) Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorise aux deux conditions suivantes :
( 1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and the maximum(or lesser) gain approved for the transmitter by Industry Canada. To reduce the potential of radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power(e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. Disposal and Recycling Information The following symbol signies that this product has to be disposed separately from ordinary household wastes at its end of life. Please kindly be aware that this is your responsibility to dispose the electronic equipment at recycling centers so as to help conserve the natural resources. Certications and Safety Approvals Hereby, Anhui Huami Information Technology Co., Ltd., declares that the radio equipment type A1821 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://en.amazt.com/support.html For more regulatory information and product certication/compliance logos related to Amazt Bip S , please go to Regulatory on your Amazt Bip S . Safety Notice The device is water resistant with a certied rating of 5 ATM. This means that the device is resistant to rain and when showering. It may also be used in shallow-water activities, such as swimming in a pool. However, the watch should not be used when scuba diving, bathing, using a sauna, or in other activities involving a high-velocity of water or the submersion below shallow depth. Please do not operate the watch underwater. After submerging, dry it with a dry cloth before operating or charging. The watch is not protected against chemical reagents, acidic or alkaline solutions, etc. Defects caused by liquid damages are not covered under the warranty. Specications Warranty and Return Policy Product Name: Amazt Bip S Lite Product model: A1823 Wireless connection: Bluetooth 5.0 BLE Input: 5 V 500 mA (Max.) Frequency: 24022480 MHz Max. Output: 0 dBm Operating temperature: 0C to 45C Water resistance rating: 5 ATM Device requirements: Devices installed with Android 5.0 or iOS 10.0 or above OS versions All Amazt products are covered by a 1-year limited warranty. Official website: en.amazt.com Help: support.amazt.com Email us at: support@amazt.com 2 4 6 8 10 12