ID SKU 69 AXXXX 100mm 40mm User Manual Package Contents 1. Amazt Verge Smartwatch 2 . USB Charging Cable and Base 3. User Manual Know the watch Buon Screen Microphone Watchband Charging and data transmission port Horn hole Heart rate sensor Download the Amazt Watch App The companion app is available for iOS in the Apple Store and for Android in the Google Play. Please search for Amazt Watch to download and install the app Turn Your Watch On/O To turn on your watch, press and hold the buon on its top right side. Your watch screen will light up and show a startup animation. The animation may play for several minutes upon initial startup. To turn o your watch, press and hold the same buon for more than six seconds to display the turn o interface. A QR code will display on your watch screen when it rst turns on. This code will be used to pair your watch with your mobile device. When the screen is in the rest state aer being switched on, press the key to lighten the screen shortly. Safety Notice The watch has the IP68 water and dust resistance rating, which can withstand soaking for 30 minutes in freshwater at 1.5 meters deep with normal temperature, but does not support showers, saunas and swimming. Please do not operate the watch underwater. Aer submerging, dry it with a so cloth before operating or charging. The watch is not waterproof against corrosive liquids such as acidic and alkaline solutions, chemical reagents, etc. The damage or defect caused by misuse or improper use is not within the scope of warranty. Regulatory Notice:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. FCC ID:XXXXXXXXXXXXXX Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Please take aention that changes or modication not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. IC: xxxxxxxxxxxxxxxxxxxxx ICAN ICES-3(B)/NMB-3(B) Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromere le fonctionnement. Under Industry Canada regulations, this radio transmier may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmier by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation d'Industrie Canada, le prsent meeur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'meeur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. Binding your watch Disposal and Recycling Information Open the "Amazt Watch" APP on your mobile phone, log in and scan the QR code displayed on the watch for binding as prompted. Charging your watch Aach your watch to the charging base as shown below. Make sure to align the 4 charging pins on the backside of the watch with the ones on the charging base. Connect the charging base to a USB plug or computer via the provided USB cable. "Charging" will display on the watch screen once clipped in. Please use a power adapter that is rated above 5V and 1.0A. Built-In Baery Precautions Do not aempt to replace the devices baery on your own or force open the built-in baery. Use only the ocial charging base to charge your device. The use of the WEEE Symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, you will help protect the environment. For more detailed information about the recycling of this product, please contact your local authority, your household waste disposal service provider or the shop where you purchased the product. Certications and Safety Approvals Hereby, Anhui Huami Information Technology Co., Ltd., declares that the radio equipment type A1811 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
hp://en.amazt.com/support.html For more regulatory information and product certication/compliance logos related to Amazt Verge, please go to Seings->About->Regulatory on your watch. Specications Name: Amazt Verge Model: A1811 Baery Capacity: 390 mAh Wireless Connectivity: Wi-Fi IEEE 802.11b/g 2.4GHz, Bluetooth 4.2BLE Input Voltage: 5V 700mA(Max.) Frequency: 2402-2480MHz Max. Output: 5.42 dBm Max. Output: 12.13 dBm Max. Output: 9 dBm Operating Temperatures: 32F - 104F / 0C - 40C Water & Dust Resistance Rating: IP68 Compatible With: Android 4.4, iOS 9.0 or above Warranty and Return Policy All Amazt products are covered by a 1-year limited warranty. Ocial website: en.amazt.com U.S . website : us.amazt.com Help: support.amazt.com Email us at: support@amazt.com __ V1.0 2018.09.04 105g
-----
0.1mm 0.5mm PANTONG Black C 1:1 mm