A1806 Amazfit Bip 2 user manual

ID SKU Amazfit Bip2 69 User Guide Charging Your Watch Place the watch on the charging dock as shown in the gure, and plug the charging cable into a USB power adapter or USB port. Use power adapters that are rated above 5V and 500mA. Download The Mi Fit App The Mi Fit app is available for iOS in the Apple App Store and for Android in the Google Play Store, please search for Mi Fit and install the app or visit www.amazt.com/setup Low Baery Charging Fully Charged Built-In Baery Precautions Do not aempt to replace the devices baery on your own or force open the built-in baery. Use only the ocial charging base to charge your device. Connecting Your Device Please make sure you have Bluetooth activated on your phone, open the Mi Fit app then follow the on-screen instructions in the app to login into an existing account

(or create a new one). Once logged in, pair the device with your phone by selecting Prole > Add device > Watch > Amazt Bip2. Pairing requires the identication of the device and pressing Pair on the watch. Regulatory Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1 . This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. FCC ID: 2AC8UA1806 Any changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. ThedevicehasbeenevaluatedtomeetgeneralRFexposurerequirement.Thedevice canbeusedinportable exposureconditionwithoutrestriction. For more regulatory information and product certication/compliance logos related to Amazt Bip2, please go to Seings-> About on your Amazt Bip2 Disposal and Recycling Information The symbol signies that this product has to be disposed separately from ordinary household wastes at its end of life. Please kindly be aware that this is your responsibility to dispose electronic equipment at recycling centers so as to help conserve natural resources. Certications and Safety Approvals We Anhui Huami Information Technology Co., Ltd., Hereby, declares that this equipment is in compliance with the applicable Directives and European Norms, and amendments. Safety Notice 1 . The watch is water resistant with a certied 5 ATM rating. This means the device is resistant to rain, shower and may be used for shallow-water activities like swimming in a pool. However, the watch should not be used for scuba diving, bathing and sauna, or other activities involving high-velocity water or submersion below shallow depth. Please do not operate the watch underwater. Aer submerging, dry it with a so cloth before operating or charging. The watch is not protected against chemical reagents, acidic and alkaline solutions, etc. Defects caused by liquid damage are not covered under warranty. 2 . 3 . Technical Specications Product Name: Amazt Bip2 Wireless Connection: Bluetooth 4.2 BLE Input: 5V DC 300mAh (Max) Water Resistance Rating: 5 ATM / 50 m / 164 Operating Temperatures: 32F - 104F / 0C - 40C Device Requirements: Devices that support Bluetooth 4.2 and run Android 4.4 or iOS 9.0 or above. Model Name: A1806 Baery Capacity: 200mAh Frequency: 2402-2480MHz Max Output: 0dBm Warranty and Return Policy All Amazt products are covered by a 1-year limited warranty. Details at: www.amazt.com/warranty Ocial website: www.amazt.com Help: www.amazt.com/support Email us at: support@amazt.com Patents: www.amazt.com/patents Copyright 2017 Huami. All rights reserved. 2485 Old Middleeld Way, Suite 30, Mountain View, CA 94043 Regulatory Notice This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1)This device may not cause interference, and

(2)This device must accept any interference, including interference that may cause undesired operation of the device. IC : 21806-A1806 Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromere le fonctionnement. ICAN ICES-3 (B)/NMB-3(B) Dongtinghu__ V1.0 2018.07.10 80g

---

0.1mm 0.5mm PANTONG BlackC Adelle Sans/regular 6PT5PT Adelle Sans/Light 5PT AdelleSansCYR/regular6PT5.5PT AdelleSansCYR/Light5PT

/508R 6PT5PT

/504L 5PT 76mm*42mm 1:1 mm