submitted | available | document details (if available) | source link |
---|---|---|---|
August 28 2019 | August 28 2019 | Kestrel_英文_低配_20190724 Adobe PDF library 15.00 |
various | User Manual | Users Manual | 1.05 MiB | August 28 2019 |
01 Package Contents 02 About the Watch Note: If the watch is powered o and doesnt turn on when you press and hold the power buon, the baery may be running low. Please charge the watch and try again. Heart rate sensor Charging plates Power buon:
Smartwatch with the band 1 Charging base 1 Instruction Manual 1 1 2 03 Installing the App 04 Pairing the Watch The watch works with the Amazt App. The Amazt App helps you control your smartwatch and all its functions. 1. 2. Press and hold the power buon to turn the watch on. Scan the QR code on the Instruction Manual with your mobile phone to download the Amazt App to your mobile phone. You can also download the latest version of the Amazt App from the Google Play Store or Apple App store. 1. Open the Amazt App on your mobile phone and create an account. Please login if you already have an account. 2. From the device list, select the watch you want to pair. Finish pairing by following the instructions on the app. 3. Once the pairing is done, the watch will display the correct time. You can set the other watch functions as needed. Note:
1. For a beer user experience, please use the most recent version of the Amazt App. The operating system needs to be Android 5.0, iOS10.0, or above. 2. 3 Note:
Do not pair the watch directly using your mobile phones Bluetooth. Follow the steps in the app to pair your watch correctly. 4 05 Charging the Watch Only use the original charger to charge your watch. The charging plates on the back of the watch should be aligned with those of the charger. Once the watch begins to charge, the charging indicator will appear on the screen. 06 Disassembly and Assembly of the Watch Strap 1. The strap can be adjusted according to your wrist size. 2. Please refer to the illustrations to disassemble or assemble the watch strap. Note:
Only use the original charging base provided in the product package to charge your watch. Also make sure that the charging base is always kept dry. 5 Note:
1. Once the strap is assembled, pull the strap properly to ensure it is installed successfully. 2. The leather strap is not waterproof or water resistant. Please keep it away from any liquids. If you are planning to wear your watch during swimming or any other activities that may expose to water, please replace the leather strap with a silicon one. 6 07 Regulatory Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including the interference that may cause undesired operation. FCC ID:2AC8UA1914 Any changes or modications that are not expressly approved by the party responsible for the compliance may void the users authority to operate the device. Note: This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferences in a residential installation. This device generates, uses, and may radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the device o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
7 8
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit dierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired operation if the device. IC:21806-A1914 CAN ICES-3(B)/NMB-3(B) Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromere le fonctionnement. 9 10 Under Industry Canada regulations, this radio transmier may only operate using an antenna of a type and the maximum (or lesser) gain approved for the transmier by Industry Canada. To reduce the potential of radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotopically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation d'Industrie Canada, le prsent meeur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'meeur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. 08 Disposal and Recycling Information The following symbol signies that this device has to be disposed separately from ordinary household wastes at the end of its life. Please kindly be aware that this is your responsibility to dispose the electronic device at recycling centers so as to help conserve the natural resources. 11 12 09 Certications and Safety Approvals 10 Safety Notice Hereby, Anhui Huami Information Technology Co., Ltd. declares that the radio device type A1914 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
hp://en.amazt.com/support.html For more regulatory information and product certication/compliance logos related to Amazt GTS, please go to Regulatory on your Amazt GTS. 1. The device is water resistant with a certied rating of 5ATM. This means that the device is resistant to rain and can be worn while showering. It may also be used in shallow-water activities, such as swimming in a pool. 2. However, the watch should not be used when scuba diving, bathing, taking a sauna, or in other activities involving a high-velocity of water or the submersion below shallow depth. 3. Please do not operate the watch underwater. Aer submerging, dry it with a dry cloth before operating or charging. 4. The watch is not protected against chemical reagents, acidic or alkaline solutions, etc. Defects caused by liquid damages are not covered under the warranty. 13 14 11 Basic Parameters 12 Warranty and Return Policy Product model: A1926 Baery capacity: 220 mAh Wireless connection: BT 5.0, BLE Input: 5 V 500 mA MAX Frequency: 24022480 MHz Max. Output: 0 dBm Operating temperature: 0C to 45C Water resistance rating: 5 ATM Device requirements: Devices installed with Android 5.0 or iOS 10.0 or above OS versions The Amazt Limited Warranty covers Amazt products against manufacturing defects beginning on the original purchase date. The warranty period is 12 months or other period as the applicable consumer laws in the consumers country of purchase require. Our warranty is in addition to rights provided by applicable consumer laws. Ocial website: en.amazt.com Support: support.amazt.com Email: support@amazt.com 15 16
This product uses the FCC Data API but is not endorsed or certified by the FCC