R5122 Roav SmartCharge Halo Users manual

Important Safety Instructions SAVE THESE INSTRUCTIONS This manual contains important safety and operating instructions for the car charger (Model R5122). Please read and understand all instructions before using this product. If damage is caused by failure to follow the instructions, the warranty does not apply. Read all instructions and cautionary markings before using this product. Do not expose to rain, moisture, or snow. Use of an attachment is not recommended or sold by the manufacturer may result in a risk of fire, electric shock, or injury to persons. Do not operate this car charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified service person. Do not disassemble this car charger; take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire. To reduce risk of electric shock, unplug this car charger before attempting any maintenance or cleaning. Turning off controls will not reduce this risk. To reduce risk of fire or electric shock, do not interconnect output terminations. Avoid long exposure to direct sunlight, which may cause damage to the device. Exposing this product to open flames may cause it to explode. Do not use this product in strong magnetic fields. Use a dry, soft, lint-free cloth to clean. Do not use any corrosive cleaner or oil to clean. CAUTION - For continued protection against fire risk, replace only with the same type and ratings of fuse. The fuse rating is 63V DC / 7A. Always obey traffic laws and pay attention to the road. Do not attempt to use this device while driving, as some features are limited while the vehicle is in motion. Failure to pay full attention to the operation of your vehicle could result in death, serious injury or property damage. You assume total responsibility and risk for using this device. Consignes de scurit importantes CONSERVEZ CES CONSIGNES - Ce manuel contient d'importantes instructions de scurit et d'utilisation relatives au chargeur de voiture modle R5122. Veuillez lire et comprendre toutes les instructions avant d'utiliser ce produit. Si le non-respect des instructions entrane des dommages, la garantie ne s'appliquera pas. Lisez toutes les instructions et les mises en garde avant d'utiliser ce produit. Ne pas exposer la pluie, l'humidit ou la neige. L'utilisation d'un accessoire non recommand ou vendu par le fabricant peut entraner un risque d'incendie, de choc lectrique ou de blessure. Ne pas utiliser ce chargeur de voiture s'il a reu un coup violent, s'il est tomb ou s'il a t endommag de quelque faon que ce soit ;

lapporter un technicien qualifi. Ne pas dmonter ce chargeur de voiture ; lapporter un technicien qualifi lorsquune rparation est ncessaire. Un rassemblage incorrect peut entraner un risque d'lectrocution ou d'incendie. Pour rduire les risques d'lectrocution, dbrancher le chargeur de voiture avant d'effectuer toute opration d'entretien ou de nettoyage. La dsactivation des commandes ne rduit pas ce risque. Pour rduire les risques d'incendie ou d'lectrocution, ne pas interconnecter les terminaisons de sortie. viter toute exposition prolonge la lumire directe du soleil, qui pourrait endommager l'appareil. Owners Manual Roav SmartCharge Halo L'exposition de ce produit des flammes nues peut provoquer son explosion. Ne pas utiliser ce produit dans des champs magntiques puissants. Utiliser un chiffon sec, doux et non pelucheux pour le nettoyage. Ne pas utiliser de nettoyant corrosif ni d'huile. ATTENTION - Pour une protection continue contre les risques d'incendie, ne remplacer le fusible que par un fusible de mme type et de mme spcification. Le fusible utilis est de 63V DC / 7A. Keep these instructions. Do not drop, puncture or disassemble this product. This product shall not be exposed to dripping or splashing liquids. Avoid long exposure to direct sunlight, which may cause damage to this product. Exposing this product to open flames may cause explosion. Do not use this product in strong magnetic fields. Use a clean, soft cloth to clean. Do not use any corrosive cleaner/oil to clean. Introduction Getting Started At a Glance Download the Roav Charger app from the App Store (iOS devices) or Google Play (Android devices). Features Anker PowerIQ charging technology Quick Charge 3.0 charging technology Companion Roav Charger app with car battery monitor and car locator. LED indicatorring with colors customizable via the Roav Charger app. Whats Included Owners Manual USB charging port (PowerIQ) USB charging port (Quick Charge 3.0) LED indicator ring Adapter ROAV Halo Plug Roav SmartCharge Halo into your vehicles cigarette lighter socket. Start the engine and Roav SmartCharge Halo will automatically power on. LED Indicator Ring Status Status Power on Waiting Bluetooth connect Bluetooth connected Bluetooth not connected Power off LED Indicator Ring Turns blue Flashes slowly for 90 seconds Steady blue (by default) Steady red (by default) Off Note: Users can customize colors for connection status on the Roav Charger app. Users can also turn off the LED indicator ring via Roav Charger app. Model: R5122 51005001098 V01 Open the Roav Charger app and follow the instructions to connect the device via Bluetooth. Enable Bluetooth on your smartphone and search for available Bluetooth devices. Select Roav Halo_XXX and connect. Once connected, the LED indicator ring will turn blue by default. Charge Your Devices Specifications Spec Notice Roav SmartCharge Halo has three USB charging ports. You can charge three devices at the same time with a maximum output power of 30W. Roav Halo_XXX Now you can locate your car, set a parking timer, check your vehicles car battery, customize the colors of the LED indicator ring, and find out more via the Roav Charger app. Specifications are subject to change without notice. 2.4A DC input: 12V-24V Power IQ output: 5V Quick Charge 3.0 output: 3.6V-6.5V Total wattage: 30W Bluetooth: V4.1 Operating temperature range: -20C to 40C / -4F to 104F Storage temperature range: -40C to 85C / -40F to 185F 3A, 6.5V-9V 2A, 9V-12V 1.5A FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help. FCC Radio Frequency Exposure Statement The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm. Qualcomm Quick Charge is a product of Qualcomm Technologies, Inc. Qualcomm and Quick Charge are trademarks of Qualcomm Incorporated, registered in the United States and other countries. All Qualcomm Incorporated trademarks are used with permission. Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. Google Play and the Google Play logo are trademarks of Google Inc. Customer Service 18-month limited warranty Lifetime technical support support@goroav.com

+1(800) 988 7973 (US) Mon-Fri 9:00-17:00 (PT)

@GoRoav

@GoRoav Anker Innovations Limited All rights reserved. ROAV and the ROAV logo are trademarks of Anker Innovations Limited registered in the United States and other countries. All other trademarks are the property of their respective owners.