A1355 Access Point Manual

Time CapsuleSetup Guide 3 Contents 5Chapter 1: Getting Started7 About Your Time Capsule 8 About the AirPort Software 9 What You Need to Get Started 11 The Time Capsule Status Light 13Chapter 2: Setting Up Your Time Capsule14 Using Your Time Capsule to Create Your Wireless Network 17 Using AirPort Utility 19 Creating a New Wireless Network 19 Configuring and Sharing Internet Access 21 Setting Advanced Options 22 Allowing Wireless Clients to Access Your Network Without Entering a Password 23 Using Time Machine with Your Time Capsule 25Chapter 3: Tips and Troubleshooting25 If You Cant Connect to the Internet 25 If You Forgot Your Network Password or Time Capsule Password 26 If Your Time Capsule Isnt Responding 27 If Your Time Capsule Status Light Flashes Amber 4 Contents 28 If Your Printer Isnt Responding 29 Updating AirPort Software 29 Time Capsule Placement Considerations 30 Items That Can Cause Interference with AirPort 31Chapter 4: Learning More, Service, and Support33Appendix: Time Capsule Specifications and Safety Guidelines36 Regulatory Compliance Information 1 5 1 Getting Started Congratulations on purchasing your Time Capsule. Read this guide to get started. The new Time Capsule offers you the simplicity of fully automated backup for yourWi-Fi network. Using the Time Machine application in Mac OS X v10.5.2 Leopard or later, its easy and automatic to back up all the computers on your network to a single Time Capsule.The Time Capsule is also a fully featured AirPort Extreme Base Station that provides simultaneous dual-band wireless networking. When you set up your Time Capsule, it creates two high-speed Wi-Fi networks: A 2.4 gigahertz (GHz) network for 802.11b, 802.11g, and 802.11n devices, such as iPhone, iPod touch, and older computers A 5 GHz network for 802.11n and 802.11a devices, such as newer computers and Apple TVWireless devices join the network that provides them the best performance and compatibility, and the Time Capsule shares your broadband Internet connection with computers and devices on your network. 6Chapter 1 Getting Started With your Time Capsule, you can: Use the Time Machine application in Mac OS X v10.5.2 (or later) to back up all the computers on your wireless network, as well as computers connected to your Time Capsule using Ethernet. Note: Your first backup with Time Capsule and Time Machine could take overnight or longer, depending on how much data youre backing up. To speed up the initial backup, use an Ethernet cable to connect your computer to the LAN port on your Time Capsule. For more information about using Time Machine, see Using Time Machine with Your Time Capsule on page 23. Create a password-protected wireless home network, and then connect to the Internet and share the connection with other computers and Wi-Fi devices, such as iPhone, iPod touch, and Apple TV. You can also share files among computers connected to the network. Create a guest network with or without password protection, to provide Internet-only access to wireless devices, such as computers, iPhone, iPod touch, and Apple TV. Connect your Time Capsule to your Ethernet network. Wireless-equipped Macintosh, Windows XP, or Windows Vista computers can then have access to an entire network without being connected by a cable. Connect a supported USB printer to your Time Capsule. Compatible computers on the AirPort network, both wireless and wired, can print to it. Connect an additional USB hard drive to your Time Capsule. Compatible computers on the AirPort network, both wireless and wired, can access information on the hard disk. Chapter 1 Getting Started 7 Connect a USB hub to your Time Capsule, and then connect multiple USB devices, such as printers or hard disks. All computers on the network have access to those devices. Important: Install AirPort Utility 5.4 from the CD that came with your Time Capsule, or download it using Software Update. Previous versions of AirPort Setup Assistant and AirPort Admin Utility are not compatible with this Time Capsule. About Your Time Capsule Your Time Capsule has five ports on the back: One 10/100/1000Base-T Gigabit Ethernet Wide Area Network (WAN) port for connecting a DSL or cable modem, or for connecting to an existing Ethernet network Three 10/100/1000Base-T Gigabit Ethernet Local Area Network (LAN) ports for connecting Ethernet devices, such as printers or computers, or for connecting to an existing Ethernet network 8Chapter 1 Getting Started One USB port for connecting a compatible USB printer, hard drive, or hub for connecting several devicesThe reset button next to the ports is used for troubleshooting your Time Capsule. The status light on the front shows the current status. About the AirPort Software Your Time Capsule works with AirPort Utility, included on the Time Capsule CD.Install AirPort Utility and follow the instructions on the following pages to set up your Time Capsule and your AirPort wireless network.Status lightInternet WAN portPower portPower cordReset buttonUSB portEthernet portsSecurity slotEthernetactivity light Chapter 1 Getting Started 9 Note: You must use AirPort Utility v5.4 to set up your Time Capsule. This Time Capsule is not compatible with previous versions of AirPort software. What You Need to Get Started To use your Time Capsule, you need a wireless-enabled computer thats compliant with IEEE 802.11a, 802.11b, or 802.11g standards, or with an IEEE 802.11n draft specification. To set up your Time Capsule, your computer must meet the requirements listed below. Note: To use your Time Capsule with Time Machine in Mac OS X Leopard, you need to use Mac OS X v10.5.2 or later. To set up your Time Capsule using a Macintosh, you need the following: A Macintosh computer with an AirPort or AirPort Extreme Card installed to set it up wirelessly, or a Macintosh computer connected to your Time Capsule with an Ethernet cable to set it up using Ethernet AirPort Utility Use AirPort Utility to set up your Time Capsule to create a wireless network, connect to the Internet, and share compatible USB printers and hard disks. You can also connect your Time Capsule to an existing AirPort Extreme wireless network.AirPort Utility is also an advanced tool for setting up and managing the Time Capsule, AirPort Extreme, and AirPort Express Base Stations. Use it to manually adjust network, routing, and security settings and other advanced options.Z AirPort status menu Use the AirPort status menu in the menu bar to switch quickly between AirPort networks, monitor the signal quality of the current network, create a computer-to-computer network, and turn AirPort on or off. The status menu is available on computers using Mac OS X. 10Chapter 1 Getting Started Mac OS X v10.4 or later AirPort Utility v5.4 or later To set up your Time Capsule using a Windows PC, you need the following: A Windows PC with 300 MHz or higher processor speed and a compatible 802.11a, 802.11b, or 802.11g wireless card, or a wireless card that complies with an IEEE 802.11n draft specification Windows XP Home or Professional (with Service Pack 2 installed) or Windows Vista AirPort Utility v5.4 or later Plugging In Your Time Capsule Before you plug in your Time Capsule, first connect the appropriate cables to the ports you want to use: Connect the Ethernet cable thats connected to your DSL or cable modem (if you will connect to the Internet) to the Ethernet WAN (< ) port. Connect a USB cable connected from the USB (d ) port on your Time Capsule to a compatible USB printer (if you will print to a USB printer), a hard disk, or a hub. Connect an Ethernet cable from any Ethernet device to the Ethernet LAN (G ) ports.After youve connected the cables for all the devices you plan to use, connect the power cord to the power port and plug your Time Capsule into a power outlet. There is no power switch. Important: Use only the power cord that came with your Time Capsule. Chapter 1 Getting Started 11 When you plug your Time Capsule into a power outlet, the status light flashes green for one second and then glows amber while your Time Capsule starts up. After your Time Capsule has started up completely, the status light flashes amber until your Time Capsule has been updated with the correct settings. The status light glows solid green after your Time Capsule is properly set up and connected to the Internet or a network.When you connect Ethernet cables to the Ethernet ports, the lights above them glow solid green. The Time Capsule Status Light The following table explains the Time Capsule light sequences and what they indicate. LightStatus/description Off Your Time Capsule is unplugged. Solid amber Your Time Capsule is completing its startup sequence. Flashing amber Your Time Capsule cant establish a connection to the network or the Internet, or is encountering a problem. Make sure you have installed AirPort Utility and use it to get information about what might cause the status light to flash amber. See If Your Time Capsule Status Light Flashes Amber on page 27. Solid green Your Time Capsule is on and working properly. If you choose Flash On Activity from the Status Light pop-up menu (in the Base Station pane of AirPort settings in AirPort Utility), the status light may flash green to indicate normal activity. Flashing amber and green There may be a problem starting up. Your Time Capsule will restart and try again. 12Chapter 1 Getting Started Whats Next After you plug in your Time Capsule, use AirPort Utility to set it up to work with your Internet connection, USB printer or hard disk, or an existing network. AirPort Utility is located in the Utilities folder in the Applications folder on a computer using Mac OS X, and in Start > All Programs > AirPort on a computer using Windows XP or Windows Vista. Solid blue Your Time Capsule is ready to allow a wireless client access to the network. See Allowing Wireless Clients to Access Your Network Without Entering a Password on page 22. LightStatus/description 2 13 2 Setting Up Your Time Capsule This chapter provides information and instructions for connecting your Time Capsule to the Internet, and using AirPort Utility to set it up to create or join a wireless network. This chapter provides an overview of connecting your Time Capsule to the Internet, and using the setup assistant in AirPort Utility to set up your network and other features of your Time Capsule. For more information about wireless networking, and for information about the advanced features of AirPort Utility, refer to Designing AirPort Networks Using AirPort Utility (Mac OS X v10.5 + Windows) at www.apple.com/support/airport.After you install AirPort Utility from the CD that came with your Time Capsule, you can do most of your network setup and configuration tasks using the setup assistant in AirPort Utility. To set advanced options, choose Manual Setup from the Base Station menu of AirPort Utility. See Setting Advanced Options on page 21. 14Chapter 2 Setting Up Your Time Capsule Using Your Time Capsule to Create Your Wireless Network When you set up your Time Capsule to provide network and Internet access, the following computers and devices can access the wireless AirPort network to share files, play games, and use Internet applications such as web browsers and email applications: Macintosh computers with AirPort or AirPort Extreme Cards 802.11a, 802.11b, 802.11g, and IEEE 802.11n draft specification wireless-equipped computers Other Wi-Fi devicesComputers connected to your Time Capsule using Ethernet can also access the network to share files and connect to the Internet.With Mac OS X v10.5.2 or later you can set up Time Machine to back up all the computers on the network to your Time Capsule. See Using Time Machine with Your Time Capsule on page 23 for more information.When you connect a compatible USB printer to your Time Capsule, supported computers on the network (wired and wireless) can print to it. Chapter 2 Setting Up Your Time Capsule 15 Using Time Capsule to create a wireless network To set it up:1 Connect your DSL or cable modem to your Time Capsule using the Ethernet WAN (< ) port.to InternetDSL or cable modemInternet WAN port<Shared printerTime Capsuleto USB port2.4 GHz2.4 or 5 GHz2.4 or 5 GHz 16Chapter 2 Setting Up Your Time Capsule 2 If you plan to share a USB printer on the network, connect it to the Time Capsule USB (d ) port or to a USB hub, using a USB cable. 3 Open AirPort Utility (located in the Utilities folder in the Applications folder on a computer using Mac OS X, and in Start > All Programs > AirPort on a computer using Windows), select your Time Capsule, and then click Continue. 4 Follow the onscreen instructions to create a new network. To print from a computer using Mac OS X v10.5:1 Choose Apple > System Preferences, and then click Print & Fax. 2 Click Add (+) and select your printer from the list. 3 Click the Add button.If your printer isnt in the list, use the buttons in the toolbar to search for it. To print from a computer using Mac OS X v10.3 or 10.4:1 Open Printer Setup Utility (located in the Utilities folder in the Applications folder). 2 Select the printer from the list.If the printer isnt in the list, click Add and choose Bonjour from the pop-up menu, and then select the printer from the list. To print from a computer using Windows XP or Windows Vista:1 Install Bonjour for Windows from the CD that came with your Time Capsule. 2 Follow the onscreen instructions to connect to your printer.Computers using AirPort or other compatible wireless cards or adapters can connect to the Internet through your Time Capsule. Computers connected to the Time Capsule Ethernet ports can also access the network and connect to the Internet. Chapter 2 Setting Up Your Time Capsule 17 Wireless computers and computers connected to the Ethernet ports can also communicate with each other through your Time Capsule. Using AirPort Utility To set up and configure your Time Capsule, use the setup assistant in AirPort Utility. AirPort Utility is installed on your computer when you install the software from the Time Capsule CD. On a Macintosh computer using Mac OS X v10.4 or later:1 Open AirPort Utility, located in the Utilities folder in the Applications folder. 2 Select your Time Capsule and click Continue.If you dont see the Time Capsule you want to configure, click Rescan to scan for available wireless devices, and then select your Time Capsule from the list. 3 Follow the onscreen instructions to set up your Time Capsule and your wireless network. On a computer using Windows XP (with Service Pack 2) or Windows Vista:1 Open AirPort Utility, located in Start > All Programs > AirPort. 2 Select your Time Capsule and click Continue. 18Chapter 2 Setting Up Your Time Capsule 3 Follow the onscreen instructions to set up your Time Capsule and your wireless network.The AirPort Utility setup assistant asks you questions about the type of network you want to use and the services you want to set up, and helps you enter the appropriate settings.If youre using your Time Capsule to connect to the Internet, you need a broadband (DSL or cable modem) account with an Internet service provider (ISP), or a connection to the Internet using an existing Ethernet network. If you received specific information from your ISP (such as a static IP address or a DHCP client ID), you may need to enter it in AirPort Utility. Have this information available when you set up your Time Capsule. Chapter 2 Setting Up Your Time Capsule 19 Creating a New Wireless Network You can use the AirPort Utility setup assistant to create a new wireless network. The setup assistant guides you through the steps necessary to name your network, protect your network with a password, and set other options.If you plan to share a USB printer or USB hard disk on your network: 1 Connect the printer or hard disk to the Time Capsule USB (d ) port. 2 Open AirPort Utility, located in the Utilities folder in the Applications folder on a Macintosh, or in Start > All Programs > AirPort on a computer using Windows XP. 3 Select your Time Capsule and click Continue.If you dont see the Time Capsule you want to configure, click Rescan to scan for available wireless devices, and then select your Time Capsule from the list. 4 Follow the onscreen instructions to create a new network. Configuring and Sharing Internet Access If you plan to share your Internet connection with wireless-enabled computers on your network or with computers connected to the Ethernet ports, you need to set up your Time Capsule as an AirPort Base Station. After your Time Capsule is set up, computers access the Internet through the AirPort network. Your Time Capsule connects to the Internet and transmits information to the computers over the wireless network.Before you use AirPort Utility to set up your Time Capsule, connect your DSL or cable modem to the Time Capsule Ethernet WAN (< ) port. If youre connecting your Time Capsule to an Ethernet network that already has Internet access, connect it to the Ethernet network. 20Chapter 2 Setting Up Your Time CapsuleUse the AirPort Utility setup assistant to enter your ISP settings and configure how your Time Capsule shares the settings with other computers.1Open AirPort Utility, located in the Utilities folder in the Applications folder on a computer using Mac OS X, or in Start > All Programs > AirPort on a computer using Windows XP.2Select your Time Capsule and click Continue.If youre making changes to a Time Capsule that has already been set up, you might have to connect to the network its created before making changes to the Time Capsule.To choose the wireless network you want to change on a Macintosh, use the AirPort status menu in the menu bar. On a computer using Windows XP, hold the pointer over the wireless connection icon until you see the network name (SSID), and then choose it from the list if there are multiple networks available.3Follow the onscreen instructions to configure and share Internet access on your Time Capsule.AirPort Utility provides a quick and easy way to set up your Time Capsule and network. If you want to set additional options for your network, such as restricting access to your network or setting advanced DHCP options, choose Manual Setup from the Base Station menu of AirPort Utility. Chapter 2 Setting Up Your Time Capsule21Setting Advanced OptionsUse AirPort Utility to set up your Time Capsule manually if you want to set advanced Time Capsule options such as advanced security options, closed networks, DHCP lease time, access control, power controls, user accounts, and more.To set advanced options:1Open AirPort Utility, located in the Utilities folder in the Applications folder on a Macintosh, and in Start > All Programs > AirPort on a computer using Windows XP.2If theres more than one wireless device in the list, select the one you want to configure. If you dont see the Time Capsule you want to configure, click Rescan to scan for available wireless devices, and then select your Time Capsule from the list.If youre making changes to a Time Capsule that has already been set up, you might have to connect to the network its created before making changes to your Time Capsule.To choose the wireless network you want to change, on a Macintosh use the AirPort status menu in the menu bar. On a computer using Windows XP, hold the pointer over the wireless connection icon until you see the network name (SSID), and then choose it from the list if there are multiple networks available.3Choose Manual Setup from the Base Station menu. If youre prompted for a password, enter it.For more about the manual setup features in AirPort Utility, see Designing AirPort Networks Using AirPort Utility (Mac OS X v10.5 + Windows) at www.apple.com/support/airport. 22Chapter 2 Setting Up Your Time CapsuleAllowing Wireless Clients to Access Your Network Without Entering a PasswordIf your network is password-protected using WPA Personal or WPA/WPA2 Personal, you can provide wireless clients access to your network without requiring them to enter the network password.When you allow a client access to your network, the clients name and wireless MAC address (or AirPort ID) are stored in the access control list of AirPort Utility until you remove the client from the list. You can also provide 24 hours of access, after which time the client will no longer be able to access your network.When you give a client access to your wireless network, the client doesnt need to enter the network password.To allow a client to access your network without entering the network password:1Open AirPort Utility, select your Time Capsule, and then choose Manual Setup from the Base Station menu. Enter the password if necessary.2Choose Add Wireless Clients from the Base Station menu.3Select how you want the client to access the network:Select PIN to enter the eight-digit number provided by the client requesting network access.Select First attempt to allow network access to the first client attempting to join the network.While the Time Capsule waits for a client to join the network, the LED glows blue. Chapter 2 Setting Up Your Time Capsule23Select Limit clients access to 24 hours if you want to provide just one day of access to your network. If you dont select this option, the client will have access until you remove the client from the list.Using Time Machine with Your Time CapsuleWith the Time Machine application in Mac OS X Leopard you can back up everything on your computer, including your photos, music, movies, and documents.After you set up Time Machine, it automatically backs up your computer on a regular basis.If youre using Mac OS X v10.5.2 or later, the first time you connect to your Time Capsule, Time Machine asks if youd like to use it to back up your files. Click Use as Backup Disk, and Time Machine takes care of the rest.Use the Time Machine pane of System Preferences in Mac OS X Leopard to set up automatic backups, change to a different backup disk, or adjust other settings.To set up or adjust Time Machine on a computer using Mac OS X Leopard:1Choose Apple > System Preferences, and then click Time Machine.2Slide the switch to ON.3Click Change Disk.4Choose your Time Capsule and click Use for Backup. 24Chapter 2 Setting Up Your Time CapsuleYour first backup with Time Capsule and Time Machine could take overnight or longer, depending on how much data youre backing up. To speed up the initial backup, connect your Time Capsule to your computer using Ethernet. In each subsequent backup, Time Machine backs up only files that have changed since the previous backup, so the backups dont take as long.Time Capsule is a great wireless backup solution for portable computers. Since the first backup can take some time, plug your portable into a power adapterthis conserves battery power and guarantees that backups wont be interrupted. Also, for the best wireless performance, place your portable computer in the same room as your Time Capsule.If you shut down your Mac or put it to sleep during a backup, Time Machine stops the backup and then continues from where it left off after your Mac starts up again. For more information about Time Machine, choose Help > Mac Help from the Finder menu on a computer using Mac OS X Leopard, and then type Time Machine in the search field. 3 253Tips and TroubleshootingYou can quickly solve most problems with your Time Capsule by following the advice in this chapter.If You Cant Connect to the InternetTry connecting to the Internet directly from your computer. If you cant connect, check to make sure your network settings are correct. If they appear to be correct and you still cant connect, contact your Internet service provider (ISP).Make sure youre connecting to the correct wireless network.If You Forgot Your Network Password or Time Capsule PasswordYou can clear the AirPort network password or Time Capsule password by resetting your Time Capsule. To reset the Time Capsule password:1Use something pointed (such as a ballpoint pen) to press and hold down the reset button for one second. Important: If you hold the reset button for more than one second, you may lose your network settings. 26Chapter 3 Tips and Troubleshooting2Select your AirPort network.On a Macintosh, use the AirPort status menu in the menu bar to select the network created by your Time Capsule (the network name doesnt change).On a computer using Windows XP, hold the pointer over the wireless connection icon until you see your AirPort network name (SSID), and choose it from the list if there are multiple networks available.3Open AirPort Utility (in the Utilities folder in the Applications folder on a Macintosh, and in Start > All Programs > AirPort on a computer using Windows XP).4Select your Time Capsule, and then choose Manual Setup from the Base Station menu.5Click AirPort in the toolbar, and then click Base Station.6Enter a new password for your Time Capsule. 7Click Wireless and choose an encryption method from the Wireless Security pop-up menu to turn on encryption and activate password protection for your AirPort network. If you turn on encryption, enter a new password for your AirPort network.8Click Update to restart your Time Capsule and load the new settings.If Your Time Capsule Isnt RespondingTry unplugging it and plugging it back in.If your Time Capsule stops responding completely, you may need to reset it to the factory default settings.Important: Resetting your Time Capsule to factory default settings erases all of the current settings and resets them to the settings that came with your Time Capsule. Chapter 3 Tips and Troubleshooting27To return your Time Capsule to the factory settings:mUse something pointed (such as a ballpoint pen) to press down and hold the reset button until the status light flashes quickly (about 5 seconds).Your Time Capsule resets with the following settings:Your Time Capsule receives its IP address using DHCP.The network name is reset to Apple Network XXXXXX (where XXXXXX is replaced with the last six digits of the AirPort ID).The Time Capsule password is reset to public.If your Time Capsule still isnt responding, try the following:1Unplug your Time Capsule.2Use something pointed to press and hold down the reset button while you plug in your Time Capsule.If Your Time Capsule Status Light Flashes AmberThe Ethernet cable may not be connected properly, your Time Capsule may be out of range of an AirPort network, or there may be a problem with your Internet service provider. If youre connected to the Internet with a DSL or cable modem, the modem may have lost its connection to the network or the Internet. Even if the modem seems to be working properly, try disconnecting it from its power supply, waiting a few seconds, and then reconnecting it. Make sure your Time Capsule is connected directly to the modem via Ethernet before reconnecting power to the modem. 28Chapter 3 Tips and TroubleshootingFor more information about why the light is flashing, open AirPort Utility, select your Time Capsule, and then choose Manual Setup from the Base Station menu. Click Base Station Status to display information about the flashing light.You can also select Monitor base station for problems in AirPort preferences. If the base station has a problem, AirPort Utility opens and walks you through solving the problem.If Your Printer Isnt RespondingIf you connected a printer to the USB port on your Time Capsule and the computers on the AirPort network cant print, try the following:1Make sure the printer is plugged in and turned on.2Make sure the cables are securely connected to the printer and to the Time Capsule USB port.3Make sure the printer is selected in the Printer List window on client computers.On a Macintosh using Mac OS X v10.5 or later:Choose Apple > System Preferences, and then click Print & Fax.Click Add (+) and select your printer in the list, and then click Add (+).On a Macintosh using Mac OS X v10.2.7 or later:Open Printer Setup Utility, located in the Utilities folder in the Applications folder.If the printer isnt in the list, click Add.Choose Bonjour from the pop-up menu, select the printer and click Add (+). Chapter 3 Tips and Troubleshooting29On a computer using Windows XP:Open Printers and Faxes from the Start menu.Select the printer. If the printer isnt in the list, click Add Printer and then follow the onscreen instructions.4Turn off the printer, wait a few seconds, and then turn it back on.Updating AirPort SoftwareApple periodically updates AirPort software. It is recommended that you update your Time Capsule to use the latest software. You can select Check for updates when opening AirPort Utility, or Check for updates in AirPort preferences. If you select Check for updates, choose an increment of time, such as weekly, from the pop-up menu to automatically check for updates.Time Capsule Placement ConsiderationsThe following recommendations can help your Time Capsule achieve the best wireless range and network coverage.Place your Time Capsule in an open area where there are few obstructions, such as large pieces of furniture or walls. Try to place it away from metallic surfaces.If you place your Time Capsule behind furniture, keep at least an inch of space between the Time Capsule and the edge of the furniture. Avoid placing your Time Capsule in areas surrounded by metal surfaces on three or more sides. 30Chapter 3 Tips and TroubleshootingIf you place your Time Capsule in an entertainment center with your stereo equipment, avoid surrounding your Time Capsule with audio, video, or power cables. Place your Time Capsule so that the cables are to one side. Maintain as much space as possible between your Time Capsule and the cables.Try to place your Time Capsule at least 25 feet (7.6 meters) from any microwave oven, 2.4 or 5 gigahertz (GHz) cordless phone, and other sources of interference.Do not place other objects (books, papers, small pets, etc.) on top of the Time Capsule. It may interfere with Time Capsule cooling.Items That Can Cause Interference with AirPortThe farther away the interference source, the less likely it is to cause a problem. The following can interfere with AirPort communication:Microwave ovensDirect Satellite Service (DSS) radio frequency leakageThe original coaxial cable that came with certain types of satellite dishes. Contact the device manufacturer and obtain newer cables.Certain electrical devices such as power lines, electrical railroad tracks, and power stationsCordless telephones that operate in the 2.4 or 5 GHz range. If you have problems with your phone or AirPort communication, change the channel your base station or Time Capsule uses, or change the channel your phone uses.Nearby base stations using adjacent channels. For example, if base station A is set to channel 1, base station B should be set to channel 6 or 11. 4 314Learning More, Service, and SupportYou can find more information about using your Time Capsule on the web and in onscreen help.Online Resources For the latest information about the Time Capsule, go to www.apple.com/airport.To register your Time Capsule (if you didnt do it when you installed the software on the Time Capsule CD), go to www.apple.com/register.For AirPort support information, forums with product-specific information and feedback, and the latest Apple software downloads, go to www.apple.com/support/airport.For support outside of the United States, go to www.apple.com/support, and then choose your country. 32Chapter 4 Learning More, Service, and SupportOnscreen HelpTo learn more about using AirPort Utility with your Time Capsule, open AirPort Utility and choose Help > AirPort Utility Help.Obtaining Warranty ServiceIf your Time Capsule appears to be damaged or doesnt function properly, please follow the advice in this booklet, the onscreen help, and the online resources. If your Time Capsule still doesnt function, go to www.apple.com/support for information about getting warranty service.Finding the Serial Number of Your Time CapsuleThe serial number is printed on the bottom of your Time Capsule. 33AppendixTime Capsule Specifications and Safety GuidelinesTime Capsule SpecificationsFrequency Band: 2.4 and 5 GHzRadio Output Power: Up to 23 dBm (nominal)Standards: 802.11 DSSS 1 and 2 Mbps standard, 802.11a, 802.11b, 802.11g specifications, and a draft 802.11n specificationInterfaces1 RJ-45 10/100/1000Base-T Gigabit Ethernet WAN (<)3 RJ-45 10/100/1000Base-T Gigabit Ethernet LAN (G)Universal Serial Bus (USB d) 2.0802.11 a/b/g/n AirPort Extreme wirelessEnvironmental SpecificationsOperating Temperature: 32 F to 95 F (0 C to 35 C)Storage Temperature: 13 F to 140 F (25 C to 60 C)Relative Humidity (Operational): 20% to 80% relative humidityRelative Humidity (Storage): 10% to 90% relative humidity, noncondensing 34Appendix Time Capsule Specifications and Safety GuidelinesSize and WeightLength: 7.75 inches (197.0 mm)Width: 7.75 inches (197.0 mm)Height: 1.43 inches (36.33 mm)Weight: 3.5 pounds (1.6 kilograms)Hardware Media Access Control (MAC) AddressesThe Time Capsule has three hardware addresses printed on the bottom of the case:AirPort ID: The two addresses used to identify the Time Capsule on a wireless network.Ethernet ID: You may need to provide this address to your ISP to connect your Time Capsule to the Internet.Using Your Time Capsule SafelyThe only way to shut off power completely to your Time Capsule is to disconnect it from the power source.When connecting or disconnecting your Time Capsule, always hold the plug by its sides. Keep fingers away from the metal part of the plug.Your Time Capsule should not be opened for any reason, even when its unplugged. If your Time Capsule needs service, see Learning More, Service, and Support on page 31. Never force a connector into a port. If the connector and port dont join with reasonable ease, they probably dont match. Make sure that the connector matches the port and that youve positioned the connector correctly in relation to the port. Appendix Time Capsule Specifications and Safety Guidelines35About Operating and Storage TemperaturesWhen youre using your Time Capsule, it is normal for the case to get warm. The Time Capsule case functions as a cooling surface that transfers heat from inside the unit to the cooler air outside.Avoid Wet LocationsKeep your Time Capsule away from sources of liquid, such as drinks, washbasins, bathtubs, shower stalls, and so on.Protect your Time Capsule from direct sunlight and rain or other moisture.Take care not to spill any food or liquid on your Time Capsule. If you do, unplug it before cleaning up the spill.Do not use your Time Capsule outdoors. The Time Capsule is an indoor product.Do Not Make Repairs YourselfAbout HandlingYour Time Capsule may be damaged by improper storage or handling. Be careful not to drop your Time Capsule when transporting it.WARNING: To reduce the chance of shock or injury, do not use your Time Capsule in or near water or wet locations.WARNING: Do not attempt to open your Time Capsule or disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside. 36Regulatory Compliance InformationWireless Radio UseThis device is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range to reduce the potential for harmful interference to co-channel Mobile Satellite systems.Cet appareil doit tre utilis lintrieur.Exposure to Radio Frequency EnergyThe radiated output power of this device is well below the FCC and EU radio frequency exposure limits. However, this device should be operated with a minimum distance of at least 20 cm between its antennas and a persons body and the antennas used with this transmitter must not be colocated or operated in conjunction with any other antenna or transmitter subject to the conditions of the FCC Grant.FCC Declaration of ConformityThis device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See instructions if interference to radio or television reception is suspected.Radio and Television InterferenceThis computer equipment generates, uses, and can radiate radio-frequency energy. If it is not installed and used properlythat is, in strict accordance with Apples instructionsit may cause interference with radio and television reception.This equipment has been tested and found to comply with the limits for a Class B digital device in accordance with the specifications in Part 15 of FCC rules. These specifications are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation.You can determine whether your computer system is causing interference by turning it off. If the interference stops, it was probably caused by the computer or one of the peripheral devices.If your computer system does cause interference to radio or television reception, try to correct the interference by using one or more of the following measures:Turn the television or radio antenna until the interference stops.Move the computer to one side or the other of the television or radio.Move the computer farther away from the television or radio.Plug the computer into an outlet that is on a different circuit from the television or radio. (That is, make certain the computer and the television or radio are on circuits controlled by different circuit breakers or fuses.)If necessary, consult an Apple Authorized Service Provider or Apple. See the service and support information that came with your Apple product. Or, consult an experienced radio/television technician for additional suggestions.Important: Changes or modifications to this product not authorized by Apple Inc. could void the EMC compliance and negate your authority to operate the product. 37This product was tested for FCC compliance under conditions that included the use of Apple peripheral devices and Apple shielded cables and connectors between system components. It is important that you use Apple peripheral devices and shielded cables and connectors between system components to reduce the possibility of causing interference to radios, television sets, and other electronic devices. You can obtain Apple peripheral devices and the proper shielded cables and connectors through an Apple-authorized dealer. For non-Apple peripheral devices, contact the manufacturer or dealer for assistance. Responsible party (contact for FCC matters only)Apple Inc., Corporate Compliance, 1 Infinite Loop M/S 26-A, Cupertino, CA 95014-2084Industry Canada StatementThis Class B device meets all requirements of the Canadian interference-causing equipment regulations. Cet appareil numrique de la Class B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada.VCCI Class B StatementEuropeEU Declaration of ConformityFor more information, see www.apple.com/euro/compliance.European Union Disposal InformationThis symbol means that according to local laws and regulations your product should be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. Some collection points accept products for free. The separate collection and recycling of your product at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.Disposal and Recycling InformationThis product has an internal battery. Please dispose of it according to your local environmental laws and guidelines. For information about Apples recycling program, go to www.apple.com/environment.California: The coin cell battery in your product contains perchlorates. Special handling and disposal may apply. Refer to www.dtsc.ca.gov/hazardouswaste/perchlorate.Deutschland: Dieses Gert enthlt Batterien. Bitte nicht in den Hausmll werfen. Entsorgen Sie dieses Gertes am Ende seines Lebenszyklus entsprechend der mageblichen gesetzlichen Regelungen.Nederlands: Gebruikte batterijen kunnen worden ingeleverd bij de chemokar of in een speciale batterijcontainer voor klein chemisch afval (kca) worden gedeponeerd. 38Taiwan: Singapore Wireless CertificationTaiwan Warning StatementsKorea Warning Statements 2009 Apple Inc. All rights reserved.Apple, the Apple logo, AirPort, AirPort Express, AirPort Extreme, Apple TV, Bonjour, iPod, Leopard, Macintosh, Mac OS, and Time Capsule are trademarks of Apple Inc., registered in the U.S. and other countries. Finder, iPhone, and Time Machine are trademarks of Apple Inc.Other product and company names mentioned herein may be trademarks of their respective companies. www.apple.com/airportwww.apple.com/support/airport034-5084-APrinted in XXXX