3-3. Using the hands-free phone system (for cellular phone) Hands-free phone system (for cellular phone) features (CD player with changer only) This system supports Bluetooth, which allows you to make or receive calls without using cables to connect a cellular phone and the system, and without operating the cellular phone. Owners of models equipped with a navigation system should refer to the Navigation System Owner's Manual. Title Using the hands-free phone system Making a phone call Setting a cellular phone Security and system setup Using the phone book Page P. 235 P. 244 P. 248 P. 253 P. 257 n Conditions affecting operation The hands-free phone system may not operate normally in the following situ-
ations:
l The cellular phone is turned off, or located outside the service area. l The cellular phone has a low battery. l The cellular phone is not connected to the system. l The cellular phone is behind the seat or in the glove box, or metal mate-
rial covers or touches the phone. n When transferring ownership of the vehicle Be sure to initialize the system to prevent personal data from being improp-
erly accessed. n Required profiles for the cellular phone l HFP (Hands Free Profile) Ver. 1.0 l OPP (Object Push Profile) Ver. 1.1 232 3-3. Using the hands-free phone system (for cellular phone) n Trademark owned by Bluetooth SIG. Inc. n Certification for the hands-free phone system FCC HYQBTAU01A IC ID:
ID:
1551A-
3 I t n e r i o r f t e a u r e s NOTE:
This device complies with Part 15 of the FCC Rules and RSS-210 of industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired oper-
ation. NOTICE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. How-
ever, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
l Reorient or relocate the receiving antenna. l l Connect the equipment into an outlet on a circuit different from that to Increase the separation between the equipment and receiver. which the receiver is connected. l Consult the dealer or an experienced radio/TV technician for help. 233 3-3. Using the hands-free phone system (for cellular phone) FCC WARNING:
Changes or modifications in construction not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. CAUTION:
Radio Frequency Radiation Exposure This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive expo-
sure evaluation (MPE). But it is desirable that it should be installed and oper-
ated with at least 20 cm and more between the radiator and persons body
(excluding extremities: hands, wrists, feet and legs). Co-location:
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. CAUTION n Caution while driving Do not use a cellular phone, or connect the Bluetooth phone. NOTICE n To prevent damage to a cellular phone Do not leave a cellular phone in the vehicle. The temperature inside may become high resulting in damage to the phone. 234 3-3. Using the hands-free phone system (for cellular phone) Using the hands-free phone system (for cellular phone) n Audio unit Displays such items as message, name, and phone number Lower-case characters and special characters, such as an umlaut, cannot be dis-
played. Press and hold: Displays information that is too long to be displayed at one time on the screen Selects speed dials Selects items such as menu or number Turn: Selects an item Press: Inputs the selected item Displays Bluetooth con-
nection condition If BT is not displayed, the hands-free phone system cannot be used. Displays the reception level 235 3 I t n e r i o r f t e a u r e s 3-3. Using the hands-free phone system (for cellular phone) n Steering wheel Type A Volume The voice guidance volume cannot be adjusted by using this button. Hands-free phone system off/ends a call/refuses a call
(on-hook switch) Hands-free phone system on/starts a call (off-hook switch) Press: Voice command sys-
tem on Press and hold: Voice com-
mand system off
(talk switch) 236 3-3. Using the hands-free phone system (for cellular phone) Type B n Microphone Volume The voice guidance volume cannot be adjusted by using this button. Hands-free phone system on/starts a call (off-hook switch) Hands-free phone system off/ends a call/refuses a call
(on-hook switch) Press: Voice command sys-
tem on Press and hold: Voice com-
mand system off
(talk switch) 237 3 I t n e r i o r f t e a u r e s 3-3. Using the hands-free phone system (for cellular phone) Operating the system by using a voice command By following voice guidance instructions output from the speaker, voice commands can be given to allow for operation of the hands-
free phone system without checking the display or operating
. n Operation procedure when using a voice command Press the talk switch and say the command for a desired function.
(P. 240) n Auxiliary commands when using a voice command The following auxiliary commands can be used when operating the system using a voice command:
Cancel: Exits the hands-free phone system Repeat: Repeats the previous voice guidance instruction Go back: Returns to the previous procedure Help: Reads aloud the function summary if a help comment is registered for the selected function 238 3-3. Using the hands-free phone system (for cellular phone) Using the hands-free phone system for the first time Before using the hands-free phone system, it is necessary to register a cellular phone in the system. The phone registration mode will be entered automatically when starting the system with no cellular phone registered. Follow the procedure below to register a cellular phone:
STEP 1 The introductory guidance and phone name registration instructions are heard. STEP 2 Register a phone name by either of the following methods. Press the off-hook switch or the talk switch. a. Select Record Name by using
, and say a name to be registered. b. Press the talk switch and say a name to be registered. A voice guidance instruction to confirm the input is heard. STEP 3 Select Confirm by using a voice command or
. A passkey is displayed and heard, and a voice guidance instruction for inputting the passkey into the cellular phone is heard. STEP 4 Input the passkey into the cellular phone. Refer to the manual that comes with the cellular phone for the oper-
ation of the phone. Guidance for registration completion is heard. 239 3 I t n e r i o r f t e a u r e s 3-3. Using the hands-free phone system (for cellular phone) Menu list of the hands-free phone system n Normal operation First menu Second menu Third menu Operation detail
Dialing a number stored in the incoming call history memory Dialing a number stored in the outgoing call history memory Dialing by inputting a number Dialing by inputting a name registered in the phone book Adding a new number Changing a name in the phone book Deleting the phone book data Deleting a registered speed dial Listing the phone book data Registering a speed dial
Add Entry Change Name Delete Entry Delete Speed Dial
(Del Spd Dial) List Names Set Speed Dial
(Speed Dial) Callback Redial Dial by number Dial by name Phonebook 240 3-3. Using the hands-free phone system (for cellular phone) First menu Second menu Third menu Operation detail Security Setup Phone Setup System Setup Set PIN Phonebook Lock Phonebook Unlock Pair Phone Change Name Delete List phones Select phone Set Passkey Guidance Vol-
ume
(Guidance Vol) Initialize Setting a PIN code Locking the phone book Unlocking the phone book Registering the cellular phone to be used Changing a registered name of a cellular phone Deleting a registered cellular phone Listing the registered cellular phones Selecting a cellular phone to be used Changing the passkey Setting voice guidance vol-
ume Initialization 241 3 I t n e r i o r f t e a u r e s 3-3. Using the hands-free phone system (for cellular phone) n Using a short cut key First menu Second menu Operation detail Dial XXX (name) Phone book add entry Phone book change name Phone book delete entry Phone book set speed dial Phone book delete speed dial Phonebook
Dialing a number registered in the phone book Adding a new number Changing the name of a phone number in the phone book Deleting phone book data Registering a speed dial Deleting a speed dial Phonebook Unlock Phonebook Lock Unlocking the phone book Locking the phone book 242 3-3. Using the hands-free phone system (for cellular phone) n Automatic adjustment of volume When vehicle speed is 50 mph (80 km/h) or more, the volume automatically increases. The volume returns to the previous volume setting when vehicle speed drops to 43 mph (70 km/h) or less. n When using a voice command For numbers, say a combination of single digits from zero to nine, # (pound),
(star), and + (plus). Say a command correctly and clearly. n The system may not recognize your voice in the following situations:
l When driving on a rough road l When driving at high speeds l When air is blowing out of the vents onto the microphone l When the air conditioning fan emits a loud noise n The following cannot be performed while driving:
l Operating the system with l Registering a cellular phone to the system n Changing the passkey P. 251 243 3 I t n e r i o r f t e a u r e s 3-3. Using the hands-free phone system (for cellular phone) Making a phone call n Making a phone call l Dialing by inputting a number Dial by number l Dialing by inputting a name Dial by name l Speed dialing l Dialing a number stored in the outgoing history memory Redial l Dialing a number stored in the incoming history memory Call back n Receiving a phone call l Answering the phone l Refusing the call n Transferring a call n Using the call history memory l Dialing l Storing data in the phone book l Deleting Dialing by inputting a number STEP 1 STEP 2 STEP 3 Press the talk switch and say Dial by number. Press the talk switch and say the phone number. Dial by one of the following methods:
a. Press the off-hook switch. b. Press the talk switch and say Dial. c. Select Dial by using
. 244 3-3. Using the hands-free phone system (for cellular phone) Dialing by inputting a name STEP 1 STEP 2 Press the talk switch and say Dial by name. Select a registered name to be input by either of the following methods:
a. Press the talk switch and say a registered name. b. Press the talk switch and say List names. Press the talk switch while the desired name is being read aloud. STEP 3 Dial by one of the following methods:
a. Press the off-hook switch. b. Press the talk switch and say Dial. c. Select Dial by using
. Speed dialing STEP 1 STEP 2 STEP 3 Press the off-hook switch. Press the preset button in which the desired number is regis-
tered. Press the off-hook switch. When receiving a phone call n Answering the phone Press the off-hook switch. n Refusing the call Press the on-hook switch. 245 3 I t n e r i o r f t e a u r e s 3-3. Using the hands-free phone system (for cellular phone) Transferring a call A call can be transferred between the cellular phone and system while dialing, receiving a call, or during a call. Use one of the follow-
ing methods:
a. Operate the cellular phone. Refer to the manual that comes with the cellular phone for the oper-
ation of the phone. b. Press the off-hook switch*1. c. Press the talk switch and say Call Transfer*2.
*1: This operation can be performed only when transferring a call from the cellular phone to the system during a call.
*2: While the vehicle is in motion, a call cannot be transferred from the system to the cellular phone. Using the call history memory Follow the procedure below to use a number stored in the call history memory:
STEP 1 Press the talk switch and say Redial (when using a number stored in the outgoing call history memory) or Call back
(when using a number stored in the incoming call history memory). Select the number by either of the following methods:
a. Say Previous or Go back until the desired number is dis-
played. b. Select the desired number by using
. STEP 2 246 3-3. Using the hands-free phone system (for cellular phone) The following operations can be performed:
Dialing: Press the off-hook switch or select Dial by using a voice command or
. Storing the number in the phone book: Select Store by using a voice command or
. Deleting: Select Delete by using a voice command or
. 3 I t n e r i o r f t e a u r e s n Call history Up to 5 numbers can be stored in each of the outgoing and incoming call his-
tory memories. n When talking on the phone l Do not talk simultaneously with the other party. l Keep the volume of the received voice down. Otherwise, voice echo will increase. 247 3-3. Using the hands-free phone system (for cellular phone) Setting a cellular phone Registering a cellular phone in the hands-free phone system allows the system to function. The following functions can be used for reg-
istered cellular phones:
n Functions and operation procedures To enter the menu for each function, follow the steps below by using a voice command or
l Registering a cellular phone 1. Setup 2. Phone Setup 3. Pair Phone l Selecting the cellular phone to be used 1. Setup 2. Phone Setup 3. Select Phone l Changing a registered name 1. Setup 2. Phone Setup 3. Change Name l Listing the registered cellular phones 1. Setup 2. Phone Setup 3. List Phones l Deleting a cellular phone 1. Setup 2. Phone Setup 3. Delete l Changing the passkey 1. Setup 2. Phone Setup 3. Set Passkey Registering a cellular phone Select Pair Phone by using a voice command or procedure for registering a cellular phone. (P. 239)
, and do the 248 3-3. Using the hands-free phone system (for cellular phone) Selecting the cellular phone to be used STEP 1 Select Select Phone by using a voice command or
. Pattern A STEP 2 Select the cellular phone to be used by either of the following methods, and select Confirm by using a voice command or
a. Press the talk switch and say the desired phone name. b. Press the talk switch and say List phones. While the name of the desired cellular phone is being read aloud, press the talk switch. Pattern B STEP 2 Select the cellular phone to be used by using
. Changing a registered name STEP 1 Select Change Name by using a voice command or
. STEP 2 Select the name of the cellular phone to be changed by either of the following methods:
a. Press the talk switch and say the desired phone name, and select Confirm by using a voice command or
. b. Press the talk switch and say List phones. While the desired phone name is being read aloud, press the talk switch. c. Select the desired phone name by using
. 249 3 I t n e r i o r f t e a u r e s 3-3. Using the hands-free phone system (for cellular phone) STEP 3 Press the talk switch or select Record Name by using
, and say a new name. STEP 4 Select Confirm by using a voice command or
. Listing the registered cellular phones causes Selecting List Phones by using a voice command or the list of registered cellular phones to be read aloud. When listing is complete, the system returns to Phone Setup. Pressing the talk switch while the name of a cellular phone is being read selects the cellular phone, and the following functions will be available:
Selecting a cellular phone: Select Phone Changing a registered name: Change Name Deleting a cellular phone: Delete 250 3-3. Using the hands-free phone system (for cellular phone) Deleting a cellular phone STEP 1 Select Delete by using a voice command or
. Pattern A STEP 2 Select the cellular phone to be deleted by either of the follow-
ing methods and select Confirm by using a voice command or
a. Press the talk switch and say the name of the desired cellu-
lar phone. b. Press the talk switch and say List phones. While the name of the desired cellular phone is being read aloud, press the talk switch. Pattern B STEP 2 Select the desired cellular phone to be deleted by using
. Changing the passkey STEP 1 Select Set Passkey by using a voice command or
. Pattern A STEP 2 Press the talk switch, say a 4 to 8-digit number, and select Confirm by using a voice command or
. 251 3 I t n e r i o r f t e a u r e s 3-3. Using the hands-free phone system (for cellular phone) Pattern B STEP 2 Select a 4 to 8-digit number by using
. The number should be input 1 digit at a time. When the entire number to be registered as a passkey has STEP 3 been input, press once again. n The number of cellular phones that can be registered Up to 6 cellular phones can be registered in the system. 252 3-3. Using the hands-free phone system (for cellular phone) Security and system setup To enter the menu of each setting, follow the steps below:
n Security setting items and operation procedure l Setting or changing the PIN (Personal Identification Number) 1. Setup 2. Security 3. Set PIN l Locking the phone book 1. Setup 2. Security 3. Phonebook Lock l Unlocking the phone book 1. Setup 2. Security 3. Phonebook Unlock n System setup items and operation procedure l Setting voice guidance volume 1. Setup 2. System Setup 3. Guidance Vol Initialization 1. Setup 2. System Setup 3. Initialize l can only be used for system setup operation. Setting or changing the PIN n Setting a PIN STEP 1 Select Set PIN by using a voice command or
. STEP 2 Enter a PIN by using a voice command or
. When using
, input the code 1 digit at a time. 253 3 I t n e r i o r f t e a u r e s 3-3. Using the hands-free phone system (for cellular phone) n Changing the PIN STEP 1 Select Set PIN by using a voice command or
. STEP 2 Enter the registered PIN by using a voice command or
. STEP 3 Enter a new PIN by using a voice command or
. When using
, input the code 1 digit at a time. Locking or unlocking the phone book STEP 1 Select Phonebook lock (Phbk Lock) or Phonebook unlock
(Phbk Unlock) by using a voice command or
. STEP 2 Input the PIN by either of the following methods and select Confirm by using a voice command or
a. Press the talk switch and say the registered PIN. b. Input a new PIN by using
. 254 3-3. Using the hands-free phone system (for cellular phone) Setting voice guidance volume STEP 1 Select Guidance Vol by using
. STEP 2 Change the voice guidance volume. To decrease the volume: Turn counterclockwise. To increase the volume: Turn clockwise. Initialization 3 I t n e r i o r f t e a u r e s STEP 1 Select Initialize and then Confirm by using
. STEP 2 Select Confirm by using
. 255 3-3. Using the hands-free phone system (for cellular phone) n Initialization l The following data in the system can be initialized:
Phone book Outgoing and incoming call history Speed dials Registered cellular phone data Security code l Once the initialization has been completed, the data cannot be restored to its original state. n When the phone book is locked The following functions cannot be used:
l Dialing by inputting a name l Speed dialing l Dialing a number stored in the call history memory l Using the phone book 256 3-3. Using the hands-free phone system (for cellular phone) Using the phone book To enter the menu of each setting, follow the steps below:
l Adding a new phone number 1. Phonebook 2. Add Entry l Setting speed dial 1. Phonebook 2. Set Speed Dial (Speed Dial) l Changing a registered name 1. Phonebook 2. Change Name l Deleting registered data 1. Phonebook 2. Delete Entry l Deleting speed dial 1. Phonebook 2. Delete Speed Dial (Del Spd Dial) 3 I t n e r i o r f t e a u r e s l Listing the registered data 1. Phonebook 2. List Names Adding a new phone number The following methods can be used to add a new phone number:
l l Transferring data from the cellular phone Inputting a phone number by using a voice command l Inputting a phone number by using l Selecting a phone number from outgoing or incoming call history 257 3-3. Using the hands-free phone system (for cellular phone) n Adding procedure STEP 1 Select Add Entry by using a voice command or
. STEP 2 Use one of the following methods to input a telephone num-
ber:
Inputting a telephone number by using a voice command STEP2-1 Select By Voice by using a voice command or
. STEP2-2 Press the talk switch, say the desired number, and select Confirm by using a voice command. Transferring data from the cellular phone STEP2-1 Select By Phone and then Confirm by using a voice command or
. STEP2-2 Transfer the data from the cellular phone. Refer to the manual that comes with the cellular phone for the details of transferring data. STEP2-3 Select the data to be registered by either of the fol-
lowing methods:
a. Say Previous or Next until the desired data is displayed, and select Confirm by using a voice command. b. Select the desired data by using
. 258 3-3. Using the hands-free phone system (for cellular phone) Inputting a phone number by using STEP2-1 Select Manual Input by using
. STEP2-2 Input a phone number by using
, and press once again. Input the phone number 1 digit at a time. Selecting a phone number from outgoing or incoming call history 3 STEP2-1 Select Call History by using a voice command or I t n e r i o r f t e a u r e s
. STEP2-2 Select Outgoing or Incoming by using a voice command or
. STEP2-3 Select the data to be registered by either of the fol-
lowing methods:
a. Say Previous or Go back until the desired data is displayed, and select Confirm by using a voice command. b. Select the desired data by using
. 259 3-3. Using the hands-free phone system (for cellular phone) STEP 3 Select the name to be registered by either of the following methods, and select Confirm by using a voice command or
a. Press the talk switch and say the desired name. b. Select Record Name by using
, and say the desired name. STEP 4 Select Confirm by using a voice command or
. STEP 3 In firm registers the newly added phone number as a speed dial.
, selecting Set Speed Dial (Speed Dial) instead of Con-
Setting speed dials STEP 1 Select Set Speed Dial (Speed Dial) by using a voice com-
mand or
. STEP 2 Select the data to be registered as a speed dial by either of the following methods:
a. Press the talk switch, say desired number, and select Con-
firm by using a voice command or
. b. Press the talk switch, and say List names. While the desired name is being read aloud, press the talk switch, and select Confirm by using a voice command or
. c. Select the desired data by using
. 260 3-3. Using the hands-free phone system (for cellular phone) STEP 3 Select the desired preset button, and register the data into speed dial by either of the following methods:
a. Press the desired preset button, and select Confirm by using a voice command or
. b. Press and hold the desired preset button. Changing a registered name STEP 1 Select Change Name by using a voice command or
. STEP 2 Select the name to be changed by either of the following methods. a. Press the talk switch, say desired name, and select Con-
firm by using a voice command or
. b. Press the talk switch, and say List names. While the desired name is being read aloud, press the talk switch, and select Confirm by using a voice command or
. c. Select the desired name by using
. STEP 3 Select Record Name with or the talk switch. STEP 4 Say a new name, and select Confirm by using a voice com-
mand or
. 261 3 I t n e r i o r f t e a u r e s 3-3. Using the hands-free phone system (for cellular phone) Deleting registered data STEP 1 Select Delete Entry by using a voice command or
. Pattern A STEP 2 Select the data to be deleted by either of the following meth-
ods, and select Confirm by using a voice command or
a. Press the talk switch, and say the name of the desired phone number to be deleted. b. Press the talk switch, say List phones. While the name of the desired phone number is being read aloud, press the talk switch. Pattern B STEP 2 Select the data to be deleted by using
. Deleting speed dials STEP 1 Select Delete Speed Dial (Del Spd Dial) by using a voice command or
. STEP 2 Press the preset button in which the desired speed dial is reg-
istered, and select Confirm by using a voice command or
. 262 3-3. Using the hands-free phone system (for cellular phone) Listing the registered data Selecting List names by using a voice command causes a list of the registered data to be read aloud. When listing is complete, the system returns to Phonebook. Pressing the talk switch while the desired data is being read aloud selects the data, and the following function will be available. Dialing: Dial Changing a registered name: Change Name Deleting an entry: Delete Entry Setting a speed dial: Set Speed Dial (Speed Dial) 3 I t n e r i o r f t e a u r e s n Limitation of number of digits A phone number that exceeds 24 digits cannot be registered. 263