all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
USERS MANUAL | Users Manual | 875.20 KiB | November 04 2005 | |||
1 | Cover Letter(s) | November 04 2005 | ||||||
1 | External Photos | November 04 2005 | ||||||
1 | ID Label/Location Info | November 04 2005 | ||||||
1 | ID Label/Location Info | November 04 2005 | ||||||
1 | Internal Photos | November 04 2005 | ||||||
1 | Test Report | November 04 2005 | ||||||
1 | Test Setup Photos | November 04 2005 |
1 | USERS MANUAL | Users Manual | 875.20 KiB | November 04 2005 |
SNU6500 EN User manual 1 Helpline Belgi/Belgique/Belgien/
02 275 0701 Luxemburg/Luxembourg 26 84 3000 Danmark 35 25 87 61 Deutschland 0696 698 4712 Espaa 09 17 45 62 46 France 03 8717 0033 00800 3122 1223 Ireland 01 601 1161 Italia 02 48 27 11 53 Cyprus 800 92256 Nederland 053 482 9800 Norge 22 70 82 50 sterreich 01 546 575 603 Portugal 0800 831 363 Schweiz/ Suisse/ Svizzera 02 23 10 21 16 Suomi 09 2290 1908 Sverige 08 632 0016 UK (United Kingdom) 0207 949 0069 European Regulations This product has been designed, tested and manufactured according to the European R&TTE Directive 1999/5/EC. Following this Directive, this product can be brought into service in the following states:
B DK E GR F IRL I L NL A P SU S UK N D CH 2 Contents EN Introduction Factors determining your network range and network speed Securing your wireless network Important safety information Safety Precautions Environmental information 4 4 4 4 Disclaimer 5 Whats in the box 6 6 What are wireless network connections?
6 6 7 Your Wireless USB Adapter 11g True Turbo 108 Mbps 8 8 9 10 12 Advanced 12 13 14 14 What do the settings mean 17 Network terminology 19 Glossary of terms 20 Technical specifications 20 Troubleshooting 23 Install Install the drivers Install hardware for Windows Connect Securing your wireless network Setup of an Ad Hoc computer network Accessing your wireless network setting. FCC complicance 3 EN Important safety information Please install and connect the product in the order as described in the Quick Start Guide booklet only. This assures best installation results with the least technical hassles. Please read this manual and the Quick Start Guide booklet carefully before using the Wireless USB Adapter 11g True Turbo 108 Mbps; and keep these documents for future reference. The most recent downloads and information on this product will be available through our web site www.philips.com/support During set-up and installation, it may be helpful to have the instructions for your PC and other network components at hand. Safety Precautions Radio equipment for wireless applications is not protected against disturbance from other radio services. Do not expose the system to excessive moisture, rain, sand or heat sources. The product should not be exposed to dripping or splashing. No object filled with liquids, such as vases, should be placed on the product. Keep the product away from domestic heating equipment and direct sunlight. Allow a sufficient amount of free space all around the product for adequate Do not open this product. Contact your Philips retailer if you experience ventilation. technical difficulties. Environmental information All redundant packing material has been omitted. We have done our utmost to make the packaging easily separable into two mono materials: cardboard (box) and polyethylene (bags, protective foam sheet).Your set consists of materials that can be recycled if disassembled by a specialised company. Please observe the local regulations regarding the disposal of packing materials and old equipment. Disclaimer This product is provided by Philips as is and without any express or implied warranty of any kind of warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. In no event shall Philips be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of information, data, or profits; or business interruption) howsoever caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of inability to use this product, even if advised of the possibility of such damages. Philips further does not warrant the accuracy or completeness of the information, text, graphics, links or other items transmitted by this product. 4 Whats in the box EN Wireless USB Adapter 11g True turbo 108 Mbps USB 2.0 cable Quick Start Guide Installation CD What else youll need or Computer USB port Windows 2000/XP Wireless Basestation Other wireless devices 5 EN Introduction SNU6500 Thank you for purchasing the Philips Wireless USB Adapter 11g True Turbo 108 Mbps. This Wireless USB Adapter 11g True Turbo 108 Mbps is a WiFi (IEEE 802.11g) compatible USB device. It fully supports high data rates up to 108 Mbps with automatic fallback to lower speeds for secure operation at lower data rates in even the most difficult of wireless environments. In this manual we will expand on how to install, configure, and use your Wireless USB Adapter 11g True Turbo 108 Mbps. This chapter will give you background information on wireless networks and their security in general. What are wireless network connections?
Your wireless network adapter uses a wireless protocol
(called IEEE 802.11g or WiFi) to communicate with other network computers by means of radio transmissions.WiFi radio waves travel outwards from the antenna in all directions, and can transmit through walls and floors.Wireless transmissions can theoretically reach up to 450 meters in an open environment and reach speeds of up to 108 megabits per second (Mbps) at close range. However, the actual network range and data throughput rate will be less, depending on the wireless link quality. Factors determining your network range and network speed The environment: Radio signals can travel farther outside of buildings, and if the wireless components are in direct line of sight to one another. Putting wireless components in high places helps avoid physical obstacles and provides better coverage. Building construction such as metal framing and concrete or masonry walls and floors will reduce radio signal strength. Avoid putting wireless components next to walls and other large, solid objects; or next to large metal objects such as computers, monitors, and appliances. Wireless signal range, speed, and strength can be affected by interference from neighbouring wireless networks and devices. Electro-magnetic devices such as televisions, radios, microwave ovens, and cordless phones, especially those with frequencies in the 2.4 GHz range, may also interfere with wireless transmission. Standing or sitting too close to wireless equipment can also affect radio signal quality. Adjusting the antenna: Do not place antennas next to large pieces of metal, because this might cause interference. Securing your wireless network As wireless computer networks use radio signals, it is possible for other wireless network devices outside your immediate area to pick up the wireless signals and either connect to your network or to capture the network traffic.Therefore, you should always enable the Wired Equivalent Privacy (WEP) or WiFi Protected Access
(WPA) network encryption key to help prevent unauthorised connections or the possibility of eavesdroppers listening in on your network traffic. For an example of how to secure your network, please see the chapter on An example of how to secure your wireless network. 6 Your Wireless USB Adapter 11g True Turbo 108 Mbps EN 1 USB Connector to PC For connecting the Wireless USB Adapter 11g True Turbo 108 Mbps to the USB port of your PC. The difference between USB 2.0 and USB 1.1:
- USB 2.0 wireless speed is max. 108 Mbps
- USB 1.1 wireless speed is max. 11 Mbps Built-in antenna for establishing wireless connections. 2 Integrated antenna 3 Indicator LED Displays the network status. LED LED colour PWR/ACT Blue Meaning Off when not connected or with PC switched off. On when receiving power and ready for operation. Blinking when transmitting data (network activity). 4 Label with MAC address The designation consisting of 12 characters (e.g. 00:30:F1:A1:F4:A5 or, in general, xx:xx:xx:xx:xx:xx) is the unique MAC address of this network device. Some safety features or network identification purposes need this MAC address. 7 EN Install Install the drivers Place the Installation CD in the CD-drive Select Agree If this screen does not appear, start the CD manually 1 Open My Computer 2 Open CD-drive 3 Open Setup.exe Click on the Wireless USB Adapter 11g True Turbo 108 Mbps photo Click on Install software Choose your situation:
Either: Infrastructure (a) Or: Ad-Hoc (b) Click Click 8 Wait until you see this window Connect your Wireless USB Adapter 11g True Turbo 108 Mbps to the computer 1 Take the USB cable 2 Plug the square connector of the USB cable into the Wireless USB Adapter 11g True Turbo 108 Mbps 3 Plug the Wireless USB Adapter 11g True Turbo 108 Mbps into one of the USB ports on your computer The difference between USB 2.0 and USB 1.1:
- USB 2.0 wireless speed is max. 108 Mbps
- USB 1.1 wireless speed is max. 11 Mbps Install hardware for Windows Either: Windows 2000 No Additional actions needed Or: Windows XP / Windows XP Service Pack 1 1 Select Next 2 Select Finish EN 9 EN 10 View the available wireless networks 1 Select No, not this time 2 Select Next 3 Select Next 4 Select Finish Click on finish
> Your Wireless USB Adapter 11g True Turbo 108 Mbps is ready for use after the reboot Connect Connect to your network Start Philips Wireless Network Manager program Double click on the tray icon If the Philips Wireless Network Manager does not start, double-click this icon View the available wireless networks 1 Select Site Survey 2 Click on Scan 3 Double click on your wireless Network Name When asked:
Input Security credentials 1 Select your Authentication Type 2 Select your Key Type 3 Select Use Passphrase if applicable 4 Enter your encryption Key See the user manual of your basestation on how to identify these security credentials. TIP for more information on encryption see Configuration sub-tab Security on page 15. Store your profile details Select Save Activate the current profile Select Apply Changes EN 11 EN Advanced Securing your wireless network. Start Philips Wireless Network Manager program Double click on the tray icon If the Philips Wireless Network Manager does not start, double-click this icon. Go to security settings 1 Select Configuration tab 2 Select Security tab 3 Click on Security off, to switch it on Input Security credentials 1 Select your Authentication Type 2 Select your Key Type if applicable 3 Select Use Passphrase if applicable 4 Enter your encryption Key See the user manual of your basestation on how to identify these security credentials. TIP for more information on encryption see Configuration sub-tab Security on page 15. Store your profile details Select Save Activate the current profile Select Apply Changes Configure other devices Make sure other networked devices use the same Network Name (SSID), Ad-Hoc wireless mode and Security credentials 12 EN Setup of an Ad Hoc computer network Start Philips Wireless Network Manager program Double click on the tray icon If the Philips Wireless Network Manager does not start, double-click this icon. Create an Ad-Hoc wireless network 1 Click on Configuration 2 Click on Common 3 Enter the wireless Network Name (SSID) 4 Select Ad-Hoc as operating mode 5 Select the Network Type Go to the Security settings 1 Select Security tab 2 Click on Security off, to switch it on Setup the encryption 1 Select your Authentication Type 2 Select your Key Type 3 Select Use Passphrase if applicable 4 Enter your encryption Key TIP for more information on encryption see Configuration sub-tab Security on page 15. Saving the profile settings 1 Click on New 2 Enter the Profile name 3 Click OK Activating the new profiles settings 4 Click on Apply Configure other devices Make sure other networked devices use the same Network Name (SSID), Ad-Hoc wireless mode and Security credentials 13 EN 14 Accessing your wireless network setting. Start Philips Wireless Network Manager program Double click on the tray icon If the Philips Wireless Network Manager does not start, double-click this icon. What do the settings mean The Philips Wireless Network Manager program has five main tabs with information and settings. Note: The Wireless On/Off button appears on the bottom of every tab to give you control over enabling and disabling the wireless link. Configuration The Configuration tab lets you manage your profiles, and gives you access to your wireless network and encryption settings. Select profile A profile is a set of all settings needed for a particular wireless connection. If you want to change between wireless networks, you can simply switch from one saved profile to the other. Use the New, Save and Delete buttons for managing your profiles. Auto Profile On/Off When Auto Profile is On, the New profile and Save profile buttons will be disabled. After you Apply Changes a profile will automatically be created with your network settings The Configuration tab contains two sub-tabs: Common and Security. See below for an explanation of the settings of these sub-tabs. Configuration sub-tab Common Network Name Input a wireless network name for the wireless network to which you want to connect. Alternatively, use the Site Survey tab to choose from the list of available Network Names. (Default: philips.) Operating Mode Set the operation mode to Ad Hoc (Peer-to-Peer) for network configurations that do not have a Wireless Base Station, and to Infrastructure for configurations with a wireless base station.
(Infrastructure is the default setting.) Transmit Rate Auto will automatically negotiate the highest possible wireless network speed. Or set a lower speed manually. Lower speeds will give better range. Channel If you are setting up an Ad Hoc wireless network, set the channel number to the same radio channel as that used by the other wireless devices in your group. However, if you are connecting to a network via a base station, then the channel is automatically set to the channel of the base station to which the adapter connects. The Channel can only be set when the Operating Mode is set to Ad Hoc
(Peer-to-Peer). Power Save Click the box if you want to use power management to reduce your portable computer's consumption of battery power and still keep the computer available for immediate use. IMPORTANT: All computers and wireless network devices in the same network should have the same Network Name (SSID) and the same encryption key for wireless security. In Ad Hoc mode, you must also specify the same radio channel for all wireless devices. Configuration sub-tab Security First, click the Security ON/OFF button to enable or disable wireless security. Authentication Type Choose WEP or WPA-PSK depending on the type of wireless security in the rest of your wireless network. Wired Equivalent Privacy (WEP) and WiFi Protected Access (WPA) are implemented in the adapter to prevent unauthorized access to your wireless network. Key Type For more secure data transmissions, set encryption to the highest number of bits. E.g. a 128-bit setting gives you a higher level of security than 64-bit. IMPORTANT: The setting must be the same for all clients in your wireless network. Use Passphrase If Passphrase is selected, security keys for WEP encryption are generated from your passphrase string. If encryption is set to 128 bit, only Key 1 is generated. If encryption is set to 64 bit, Keys 1-4 are generated.You must use the same Passphrase and Default Key settings on all the other stations in your network. Note: A passphrase string can consist of up to 32 alphanumeric characters. The WPA (WiFi Protected Access) implemented in this Wireless USB Adapter11g True Turbo 108 Mpbs uses an alphanumeric password between 8 and 63 characters long. This password may include symbols and spaces. IMPORTANT: You must use the same encryption key throughout your network. Apply changes Click on Apply changes to activate the changes you made. Key 1-4 If the Key Type is set to Hex, the security keys are four 10 digit keys for the 64-bit WEP setting and four 26-digit keys for the 128-bit WEP setting.
(The hexadecimal digits can be 0~9 & A~F, e.g. D7 0A 9C 7F E5.) Default Key Choose the Key ID that has the encryption string you prefer. If you are using a key generated from the passphrase, you must use the same passphrase and key on each wireless device. Link information The Link information tab displays information on the wireless network name
(SSID) to which there is a wireless connection: the signal strength, Troughput history, current connection speed, channel and Basestation Name ID (MAC). IP information The IP information tab displays information on the Host Name, IP Address, IP Netmask, and Gateway. This window also contains buttons for releasing and renewing the IP address. This is done to bring a computer back onto the network after moving it to a different location, or after experiencing an unexpected outage. First release, then renew the IP address. Computers on DHCP networks often (but not always) re-establish network connectivity automatically. EN 15 EN Site Survey Selecting the Site Survey tab displays a list of available wireless network access points. Next, click Scan to update the list. It shows you the following information:
Network type shows the network setup The name of the wireless connection (Network Name, or SSID) Network mode shows which WIFI standard is used An icon reflecting if encryption is enabled Signal strength Channel that is used by the network MAC address of the device Double-click one of the network names to open the Profile Wizard for establishing a wireless connection with that network. Version information Selecting this tab displays vendor and version information. 16 Network terminology EN Read this chapter if you want to know how to interpret the terminology used in this manual. A network provides a means of communication between two or more computers
(and other devices) that are connected to each other through wired or wireless means. WIRED At each computer, you will need a network adapter or Network Interface Card
(NIC) to be able to connect the computer to the network cable. Examples are:
Ethernet cable Ethernet notebook adapter Already built-in ETHERNET WIRELESS At each computer, you will need to install a WiFi wireless adapter to be able to connect to another wireless enabled device. Examples are:
Wireless USB adapter Wireless notebook adapter 11g Already built-in 17 In a network, the computers need to be able to connect to each other physically. Therefore, another important network property is how the computers connect to each other, either directly or through a central device. ONE-ON-ONE WIRED NETWORK also known as: Direct connection (max. 2 PCs) NOTE: Use a crossover Ethernet cable to connect two computers directly to each other. WIRED NETWORK WITH MORE THAN 2 PCs Use a hub or switch to connect more than 2 PCs to each other. NOTE: Use straight-through Ethernet cables to connect the computers to the central device (hub/switch). HOW TO INTERCONNECT WIRED NETWORKS Use a gateway router to connect one network to another (e.g. to the Internet, also known as WAN). ONE-ON-ONE WIRELESS NETWORK Also known as: Ad Hoc / Peer-to-Peer WIRELESS NETWORK WITH MORE THAN 2 PCs Also known as: Ad Hoc / Peer-to-Peer The wireless medium forms a hub in and of itself. No hardware hub is needed. CONNECTING WIRELESS TO WIRED NETWORKS also known as: Infrastructure / Access Point Use a wireless base station. Central devices, like a hub, switch, router or wireless access point may be stand-
alone devices or built into a computer. A hub has multiple ports and serves as a central connection point for communication lines from all computers on a wired network. It copies all data arriving at one port to the other ports. A switch is similar to a hub, but is able to handle different network speeds at each port. Gateway routers and wireless access points route network traffic from one network to another (e.g. from a wired network to the Internet, or from a wireless network to a wired network or to the Internet). EN 18 Glossary of terms EN DHCP Dynamic Host Configuration Protocol. This protocol automatically configures the TCP/IP settings of every computer on your home network. DNS Server Address DNS stands for Domain Name System, which allows Internet host computers to have a domain name and one or more IP addresses . A DNS server keeps a database of host computers and their respective domain names and IP addresses, so that when a domain name is requested , the user is sent to the proper IP address. The DNS server address used by the computers on your home network is the location of the DNS server your ISP has assigned. DSL Modem DSL stands for Digital Subscriber Line. A DSL modem uses your existing phone lines to transmit data at high speeds. Ethernet A standard for computer networks. Ethernet networks are connected by special cables and hubs, and move data around at up to 10 million bits per second
(Mbps). HPNA Home Phone line Networking Alliance, which is an association of corporations (including ) working to ensure the adoption of a single, unified phone line networking standard. Your Home Connect home network gateway is compliant with HPNA Specification 2.0, which allows networking speeds of up to 1 million bits per second (Mbps) using your existing home phone lines. IP Address IP stands for Internet Protocol. An IP address consists of a series of four numbers separated by periods, that identifies an single, unique Internet computer host. Example: 192.34.45.8. ISP Gateway Address(see ISP for definition). The ISP Gateway Address is an IP address for the Internet router located at the ISP's office. This address is required only when using a cable or DSL modem. ISP Internet Service Provider. An ISP is a business that provides connectivity to the Internet for individuals and other businesses or organizations. LAN Local Area Network. A LAN is a group of computers and devices connected together in a relatively small area (such as a house or an office). Your home network is considered a LAN. MAC Address MAC stands for Media Access Control. A MAC address is the hardware address of a device connected to a network. NAT Network Address Translation. This process allows all of the computers on your home network to use one IP address. Using the NAT capability of the Home Connect home network gateway, you can access the Internet from any computer on your home network without having to purchase more IP addresses from your ISP. PPPoE Point-to-Point Protocol over Ethernet. Point-to-Point Protocol is a method of secure data transmission originally created for dial-up connections; PPPoE is for Ethernet connections. Secondary Dial-Up A secondary dial-up phone number is used by your ISP in case your primary dial-up number has too many other customers accessing it. The secondary dial-up phone number will be used if your primary dial-up phone number cannot be accessed. SPI Stateful Packet Inspection. SPI is the type of corporate-grade Internet security provided by your Home Connect home network gateway. Using SPI, the gateway acts as a "firewall," protecting your network from computer hackers. Subnet Mask A subnet mask, which may be a part of the TCP/IP information provided by your ISP, is a set of four numbers configured like an IP address. It is used to create IP address numbers used only within a particular network (as opposed to valid IP address numbers recognized by the Internet, which must assigned by InterNIC). TCP/IP Transmission Control Protocol/Internet Protocol. This is the standard protocol for data transmission over the Internet. WAN Wide Area Network. A network that connects computers located in geographically separate areas, (i.e., different buildings, cities, countries). The Internet is a wide area network. 19 EN Technical specifications Radio Radio Technology Antenna Type Data Rate Host interface Power consumption send / receive Dimensions
(h x w x d) Weight Operating Temperature Storage Temperature Humidity Troubleshooting IEEE 802.11g Direct Sequence Spread Spectrum
(DSSS) Orthological Frequency Division Multiplexing (OFDM) Built-in antenna 1 / 2 / 5.5 / 6 / 9 / 11 /12 / 18 / 24 / 36 /
48 / 54 / 72 / 96 / 108 Mbps USB specification version 2.0 (max. 108 Mbps) & 1.1 (max. 11 Mbps) Approx. 500 mA / 420 mA 22 x 79 x 93 mm Approx. 55 g (adapter only) 0 ~ 55C 20 ~ 75C 5 ~ 90% non-condensing Please, check the following troubleshooting items and our web site www.philips.com/support before contacting our technical support. Problem Possible cause Solution ADAPTER INSTALLATION PROBLEMS Your PC cannot find the Wireless USB Adapter or the net-
work driver does not install correctly. USB Adapter not connected. Make sure the USB cable is securely connected to the USB connectors of both the adapter and of your PC. USB Adapter damaged Check for any hardware problems, such as physical damage to the adapter's connector. USB Adapter or port Try to connect the adapter to defective. another USB port. If this also fails, test your computer with another USB device that is known to operate correctly. Conflicting network adapters. If there are other network adapters in the computer, they may be causing conflicts. Remove all other adapters from the computer and test the wireless adapter separately. If it still does not work, try re-installing the wireless USB adapter 11g from the original Installation CD. Restart your PC. 20 Problem Possible cause Solution EN PC or other network Make sure the computer and other devices switched off. network devices are receiving power. NETWORK CONNECTION PROBLEMS If the Link LED on the Wireless USB Adapter 11g True Turbo 108 Mbps does not light, or if you cannot access any network resources from the computer. No access to a Windows or Net-
Ware service on the network. Service unavailable. Check that you have enabled and configured the service correctly. If you cannot connect to a particular server, be sure that you have access rights and a valid ID and password. If you cannot access the Internet, be sure you have configured your system for TCP/IP. If your wireless adapter cannot communicate with a computer in the network when configured for Infrastructure mode. Wrong settings Range too long
(weak radio signal). Base Station / Access Make sure the access point that the station is associated with is powered Point is switched off. on. Reposition your Wireless Adapter. Network speed does not exceed 11 Mbps. USB 1.1 port used in stead of USB 2.0. Other network components are unsuitable for higher network speeds. Make sure the SSID and the network encryption key are the same as those used by the wireless access point. Connect the wireless adapter to a hi-speed USB 2.0 port for maximum speed. Make sure all network components are suitable for high network speeds. 21 English Hereby, Philips Consumer Electronics, BLC P&A CC, declares that this SNU6500 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Finnish Philips Consumer Electronics, BLC P&A CC vakuuttaa tten ett SNU6500 tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Dutch Hierbij verklaart, Philips Consumer Electronics, BLC P&A CC dat het toestel SNU6500 in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. French Par la prsente, Philips Consumer Electronics, BLC P&A CC, dclare que l'appareil SNU6500 est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE Swedish Hrmed intygar, Philips Consumer Electronics, BLC P&A CC, att denna SNU6500 str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG. Danish Undertegnede Philips Consumer Electronics, BLC P&A CC erklrer herved, at flgende udstyr SNU6500 overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF German Hiermit erklrt Philips Consumer Electronics, BLC P&A CC die bereinstimmung des Gertes SNU6500 mit den grundlegenden Anforderungen und den anderen relevanten Festlegungen der Richtlinie 1999/5/EG. Greek O Philips Consumer Electronics, B.U. Peripherals Accessories O SNU6500 O O O O O 1 999/5/
Italian Con la presente Philips Consumer Electronics, BLC P&A CC dichiara che questo SNU6500 conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Spanish Por medio de la presente, Philips Consumer Electronics, BLC P&A CC, declara que el SNU6500 cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE Portuguese Philips Consumer Electronics, BLC P&A CC declara que este SNU6500 est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/CE. EN 22 FCC compliance This device complies with Part 15 of the FCC Rules (U.S.A.). Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment to an outlet on a circuit different from that to which the Increase the separation between the equipment and receiver. receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radion & your body. IMPORTANT Any changes or modifications to the equipment by the user not expressly approved by the guarantee or manufacturer could void the user's authority to operate such equipment. EN 23 Certificado de garantia Certificato di garanzia Certificado de garantia Garantibevis Garanticertifikat Garantibevis Takuutodistus year warranty anne garantie Jahr Garantie jaar garantie ao garantia anno garanzia r garanti r garanti r garanti vuosi takuu ao garantia Guarantee certificate Certificat de garantie Garantieschein Garantiebewijs 22 Type:
SNU6500 Serial nr: _____________________________________________________________________ Date of purchase - Date de la vente - Verkaufsdatum - Aankoopdatum - Fecha de compra - Date dacquisito -
Data da adquirio - Ga a - Inkpsdatum - Anskaffelsesdato - Kjpedato - Oatopiv -
Dealers name, address and signature Nom, adresse et signature du revendeur Name, Anschrift und Unterschrift des Hndlers Naam, adres en handtekening v.d. handelaar Nombre, direccion y firma del distribudor Nome, indirizzo e firma del fornitore a, a a . terfrsljarens namn, adress och signatur Forhandlerens navn, adresse og unterskrift Forhandlerens navn, adresse og unterskrift Jlleenmyyjn nimi, osoite ja allekirjoitus Nome, morada e assinature da loja 0682 Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. 2005 Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change without notice. 26 www.philips.com 3122-377-0251.1 PHILIPS CE BCU PERIPHERALS &
ACCESSORIES Project Office Author: Luuk Pals COMPANY CONFIDENTIAL Product Specification CPWUA054 AV84-MMN/LP/03-11-21.00 Rev 0.2 Page: 1/18 2004 Dec 13 Supersedes:
Date:
Product Specifications SNU6500 IEEE 802.11g (Super G) USB2.0 Adapter v 0.1 SNU6500 1 PHILIPS CE BCU PERIPHERALS &
ACCESSORIES Project Office Author: Luuk Pals Revision History COMPANY CONFIDENTIAL Product Specification CPWUA054 AV84-MMN/LP/03-11-21.00 Rev 0.2 Page: 2/18 2004 Dec 13 Supersedes:
Date:
Edition #
Reason for revision V 0.1 V 0.2 V 0.3 Initial Document Updated to Philips doc Updated to Philips doc Issue date Dec. 2,2004 Dec. 13,2004 Dec. 14, 2004 Written by Jason Lee Luuk Pals Jason Lee SNU6500 2 PHILIPS CE BCU PERIPHERALS &
ACCESSORIES Project Office Author: Luuk Pals COMPANY CONFIDENTIAL Product Specification CPWUA054 AV84-MMN/LP/03-11-21.00 Rev 0.2 Page: 3/18 2004 Dec 13 Supersedes:
Date:
Chapter 2 Chapter 1 Table of Contents Revision History ____________________________________________________________ 2 Table of Contents ___________________________________________________________ 3 Introduction ________________________________________________________________ 5 Introduction ____________________________________________________________ 5 Scope: This chapter describes the hardware architecture and product features for the Wireless USB adapter ____________________________________________________ 5 Product Features ________________________________________________________ 5 Applications ___________________________________________________________ 6 Appearance ________________________________________ 6 PCB Dimension : must be filled in by Arcdyan ________________________________ 7 Hardware ___________________________________________ 8 General Overview _______________________________________________________ 8 Main Chipset Information _________________________________________________ 8 Product specifications: ___________________________________________________ 9 Philips Codes number ____________________________________________________ 9 USB cable ____________________________________________________________ 10 Dimensions (folded)mm _________________________________________________ 10 User instruction ________________________________________________________ 10 CDROM _____________________________________________________________ 10 Gift box ______________________________________________________________ 10 Shipping carton ________________________________________________________ 11 Modulation Rate _______________________________________________________ 13 Software ___________________________________________ 15 Operating System Supported______________________________________________ 15 Security ______________________________________________________________ 15 Configuration Utility____________________________________________________ 15 SW User interface specification.___________________________________________ 16 Chapter 3 SNU6500 3 PHILIPS CE BCU PERIPHERALS &
ACCESSORIES Project Office Author: Luuk Pals COMPANY CONFIDENTIAL Product Specification CPWUA054 AV84-MMN/LP/03-11-21.00 Rev 0.2 Page: 4/18 2004 Dec 13 Supersedes:
Date:
Packaging. ____________________________________________________________ 16 Default SW settings_____________________________________________________ 16 Approbation Requirement________________________________________________ 16 References __________________________________________________________ 16 Signed for agreement: _______________________________________________________ 18 SNU6500 4 PHILIPS CE BCU PERIPHERALS &
ACCESSORIES Project Office Author: Luuk Pals COMPANY CONFIDENTIAL Product Specification CPWUA054 AV84-MMN/LP/03-11-21.00 Rev 0.2 Page: 5/18 2004 Dec 13 Supersedes:
Date:
Introduction Introduction The SNU6500 Wireless USB Adapter is a set containing:
1 x Wireless USB Adapter 1x USB2.0 Cable 1x Before You Start Card ( BYSC) 1x CD rom with PC connection wizard software + User Manual ( 12 languages) 1x Giftbox SNU6500 is an industrial wireless 802.11g USB2.0 Adapter which enables wireless networking systems to attain data transmission speeds up to 108 megabits-per-second (Mbps), USB v2.0 while remaining backward compatible to the existing installed base of over 15 million Wi-Fi systems worldwide. It supports operation to both the IEEE 802.11b and IEEE 802.11g standards. SNU6500 enables a next generation of high-data-rate platforms for operation in the 2.4 GHz band that deliver a five-fold speed increase. SNU6500 incorporates the 802.11g standard's mandatory modulation schemesComplementary Code Keying (CCK), which is used in 802.11b, and Orthogonal Frequency Division Multiplexing (OFDM), used in 802.11g. Scope: This chapter describes the hardware architecture and product features for the Wireless USB adapter Product Features High speed for wireless LAN connection, up at 108 Mbps data rate. Backward compatible to the existing IEEE 802.11b WLAN infrastructure. An user-friendly utility to configure SSID, security setup and site survey. Wireless data encryption with 64, 128 encryption for security. Support USB v2.0 High data rate 108, 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2 and 1Mbps IEEE 802.11g Direct Sequence high rate compatible. IEEE 802.11b Direct Sequence high rate compatible. SNU6500 5 PHILIPS CE BCU PERIPHERALS &
ACCESSORIES Project Office Author: Luuk Pals COMPANY CONFIDENTIAL Product Specification CPWUA054 AV84-MMN/LP/03-11-21.00 Rev 0.2 Page: 6/18 2004 Dec 13 Supersedes:
Date:
Auto fallback data rate under noisy environment. RC4 wireless data encryption with 64 and 128 bits encryption for security.(WEP) Built-in antenna User-friendly text input WEP Key by any text (comply with Atheros) or Hex input. Site survey tool to scan and easily join all nearby base stations. Support RTS and CTS threshold control for better throughput. Driver upgradeable. Supports for 802.1x, WPA, WPA2,TKIP USB 2.0 cable for connection to PC/laptop. CD with Driver and Utility (Arcadyan) , Install Wizard (Philips) Applications Home networking for device sharing. Wireless multimedia. Wireless office for extension Ethernet range. Mobile networking for notebook PC, Desktop PC, Monitor, PDA with USB port ready device. Chapter 1 Appearance LED 1 Name OFF ON Blink Power Power Power Color Blue Blue Blue Function Off: Power off On : Power on Blinking: activity, data transmitting SNU6500 6 PHILIPS CE BCU PERIPHERALS &
ACCESSORIES Project Office Author: Luuk Pals COMPANY CONFIDENTIAL Product Specification CPWUA054 AV84-MMN/LP/03-11-21.00 Rev 0.2 Page: 7/18 2004 Dec 13 Supersedes:
Date:
PCB Dimension : must be filled in by Arcdyan PCB size: 6.9 x 4.7cm Same housing as used for the Philips CPWUA054 adapter. By re-using the housing the development time will decrease and time to market is as fast as possible. SNU6500 7 PHILIPS CE BCU PERIPHERALS &
ACCESSORIES Project Office Author: Luuk Pals COMPANY CONFIDENTIAL Product Specification CPWUA054 AV84-MMN/LP/03-11-21.00 Rev 0.2 Page: 8/18 2004 Dec 13 Supersedes:
Date:
Chapter 2 Hardware General Overview USB 2.0 Interface and 802.11 g chipset-on-board design. Antenna: 1. Internal two Antenna 2. External LNA module antenna No external antenna 2.1 Hardware Architecture The Hardware architecture displayed below is delivered from the specification of Arcadyan The architecture is based on the Atheros chipset Hardware Architecture:
8021.11b/g AR2112 Main Chipset Information 2.1.1 Atheros AR5523+AR2112 2.1.2 An IEEE 802.11g MAC + Baseband processor, on-chip SRAM memory and USB2.0 interface. Radio-on-Chip (RoC). A zero-IF direct down conversion transceiver. SNU6500 8 PHILIPS CE BCU PERIPHERALS &
ACCESSORIES Project Office Author: Luuk Pals COMPANY CONFIDENTIAL Product Specification CPWUA054 AV84-MMN/LP/03-11-21.00 Rev 0.2 Page: 9/18 2004 Dec 13 Supersedes:
Date:
2.4GHz power amplifier. 5GHz SiGe monolithic VCO. Product specifications:
Philips Codes number Type number SNU6500/00 SNU6500/37 12NC 9082 100 04463 Supplied to Europe USA & CA Dimensions Material Length Width Height Weight PCB 92.80mm 78.40mm 21.40mm 55 g
(55 g for wireless USB adapter only) FR4 Mechanics ABS + PC Current consumption:
Tx:
Rx:
500 mA Max 420 mA Max Operating Temperature: 0 ~ 55 oC ambient
-20 ~ 75 oC Storage Temperature:
Humidity:
5 ~ 90% non-condensing ESD:
EN61000-4-2, which specifies 4kV contact and 8kV air discharge Packaging:
In protective bag SNU6500 9 COMPANY CONFIDENTIAL Product Specification CPWUA054 AV84-MMN/LP/03-11-21.00 Rev 0.2 Page: 10/18 2004 Dec 13 Supersedes:
Date:
105 mm 32 mm 25 mm A5 format, thickness: 15 mm A5, folded A4 paper White envelope 120 x 120 mm Drivers, installation SW, Instruction For Use, Warranty card Provided by Philips P&A PHILIPS CE BCU PERIPHERALS &
ACCESSORIES Project Office Author: Luuk Pals USB cable Dimensions (folded)mm Length Width Height User instruction Instruction For Use:
Dimensions:
Quick Starting Guide:
Dimensions CDROM CDROM packaging CDROM content CDROM printing Gift box Dimensions Printing Length 251 mm Width 162 mm Height 50 mm Provided by Philips P&A SNU6500 10 COMPANY CONFIDENTIAL Product Specification CPWUA054 AV84-MMN/LP/03-11-21.00 Rev 0.2 Page: 11/18 2004 Dec 13 PHILIPS CE BCU PERIPHERALS &
ACCESSORIES Project Office Author: Luuk Pals Shipping carton Dimensions Number of single units Frequency Band:
Supersedes:
Date:
545 mm 373 mm 181 mm Length Width Height 14 802.11g Radio : 2.4 GHz 802.11b Radio : 2.4 GHz USA FCC Canada IC Europe ETSI Japan STD-T66/STD-33 Modulation TYPE: OFDM, CCK Operating Channels:
IEEE 802.11b compliant:
2412~2462MHz (Ch1~Ch11) 2412~2462MHz (Ch1~Ch11) 2412~2472MHz (Ch1~Ch13) 2412~2484MHz (Ch1~Ch14) 11 channels (US, Canada) 13 channels (ETSI) 14 channels (Japan) IEEE 802.11g compliant:
11 channels (US, Canada) 13 channels (Europe, Japan) Security: Hardware 64/128-bit WEP, Support for WPA in Windows XP Zero Client Configuration Transmitted Power: See Table 1(will update later) Rates/Sensitivity/Allowable Path Loss: See the Table 2(will update later) Regulatory compliance:
ETSI/ CE Current consumption: TX: 485mA Max; RX: 330mA Max;
Host Interface: USB 2.0 SNU6500 11 PHILIPS CE BCU PERIPHERALS &
ACCESSORIES Project Office Author: Luuk Pals COMPANY CONFIDENTIAL Product Specification CPWUA054 AV84-MMN/LP/03-11-21.00 Rev 0.2 Page: 12/18 2004 Dec 13 Supersedes:
Date:
Operating Temperature: 0 ~ 50 oC ambient Storage Temperature: -20 ~ 70 oC ambient Humidity: 5 ~ 90% and must be non-condensing ESD: EN61000-4-2, which specifies 4kV contact and 8kV air discharge. SNU6500 12 PHILIPS CE BCU PERIPHERALS &
ACCESSORIES Project Office Author: Luuk Pals COMPANY CONFIDENTIAL Product Specification CPWUA054 AV84-MMN/LP/03-11-21.00 Rev 0.2 Page: 13/18 2004 Dec 13 Supersedes:
Date:
Table 1: Modulation Scheme and Transmit Power Modulation Rate Output Power 2.4-2.5GHz (dBm) 802.11b 1Mbps 802.11b 2Mbps 802.11b 5.5Mbps 802.11b 11Mbps 17 17 17 17 Modulation Rate Output Power 2.4-2.5GHz (dBm) 802.11g 6Mbps 802.11g 9Mbps 802.11g 12Mbps 802.11g 18Mbps 802.11g 24Mbps 802.11g 36Mbps 802.11g 48Mbps 802.11g 54Mbps 802.11g 108Mbps Table 2: Typical Range at Which Frame (1000 Bytes PDUs) Packet Error Rate=10%
14 14 14 14 13 13 12 12 12 Modulation Rate Receiver Sensitivity (dBm) 2.412 ~ 2.484 GHz 802.11b 1Mbps 802.11b 2Mbps 802.11b 5.5Mbps 802.11b 11Mbps
-92
-89
-85
-82 SNU6500 13 PHILIPS CE BCU PERIPHERALS &
ACCESSORIES Project Office Author: Luuk Pals COMPANY CONFIDENTIAL Product Specification CPWUA054 AV84-MMN/LP/03-11-21.00 Rev 0.2 Page: 14/18 2004 Dec 13 Supersedes:
Date:
Modulation Rate Receiver Sensitivity (dBm) 802.11g 6Mbps 802.11g 9Mbps 802.11g 12Mbps 802.11g 18Mbps 802.11g 24Mbps 802.11g 36Mbps 802.11g 48Mbps 802.11g 54Mbps 802.11g 108Mbps
-82
-81
-79
-77
-74
-70
-66
-65
-65 SNU6500 14 PHILIPS CE BCU PERIPHERALS &
ACCESSORIES Project Office Author: Luuk Pals COMPANY CONFIDENTIAL Product Specification CPWUA054 AV84-MMN/LP/03-11-21.00 Rev 0.2 Page: 15/18 2004 Dec 13 Supersedes:
Date:
Chapter 3 Software Operating System Supported Windows ME, Windows 2000 and Windows XP, Security Wired Equivalent Privacy (WEP) supports modes that have 64, and 128 bit keys. Support for WPA in Windows XP Zero Client Configuration Configuration Utility An Utility to set SSID, WEP key and dynamically view configuration. Utility + Installer for:
Windows Me Windows 2000 Windows XP Mac OS XDont suport SNU6500 15 PHILIPS CE BCU PERIPHERALS &
ACCESSORIES Project Office Author: Luuk Pals COMPANY CONFIDENTIAL Product Specification CPWUA054 AV84-MMN/LP/03-11-21.00 Rev 0.2 Page: 16/18 2004 Dec 13 Supersedes:
Date:
SW User interface specification. The SNU6500 will be supplied with PC software. The software developed for the CPWUA 054can be re-used after it is updated. Both the drivers for USB2.0 and 802.11g needs to be added. With the backward compatibility of 802.11g standard also the software should enable to view the current connection type (802.11b or 802.11g). According document AV84-MMN/LP/03-11-21.01 Packaging. The SNU6500 will be supplied in a gift box with same dimensions as the CPWUA 54. The packaging artwork of the CPWUA 054 is available at Arcadyan and needs to be update by Philips to the SNA6500 situation (ie replace 802.11b by 802.11g etc) For silkscreen in Mechanic and Approbation label Philips provide the content , Arcadyan update the print . Default SW settings Approbation Requirement Approbation requirements and documentation for the CPWUA054 (/00 /37 and /50 /87) is discussed in the project team. Specification of approbation is communicated via the project managers and quality manager of both companies. See reference [6]
References Atheros Reference Design Functional Specification IEEE802.11b/IEEE802.11g Standard USB2.0 Specification SNU6500 16 COMPANY CONFIDENTIAL Product Specification CPWUA054 AV84-MMN/LP/03-11-21.00 Rev 0.2 Page: 17/18 2004 Dec 13 Supersedes:
Date:
PHILIPS CE BCU PERIPHERALS &
ACCESSORIES Project Office Author: Luuk Pals Reference list
[1] NRE on certification costs 20030924 covers requirements on approbation & safety, including notification per country.
[2] Quality requirement spec AHQ-LP-16260
[3] SW specification document AV84-MMN/LP/03-11-21.01
[4] 09242003 AR84-PRO_MG_03-064 Rev 1.0 Product spec USB 2.0 cable1
[5] Approbation Requirements specification 1 Color will be Pantone 429C (grey) for connector and cable. SNU6500 17 PHILIPS CE BCU PERIPHERALS &
ACCESSORIES Project Office Author: Luuk Pals COMPANY CONFIDENTIAL Product Specification CPWUA054 AV84-MMN/LP/03-11-21.00 Rev 0.2 Page: 18/18 2004 Dec 13 Supersedes:
Date:
WARNING This document is intended for internal use only. A Non-Disclosure Agreement (NDA) is required to release this document under any circumstances. Signed for agreement:
SNU6500 18
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2005-04-11 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2005-04-11
|
||||
1 | Applicant's complete, legal business name |
Arcadyan Technology Corporation
|
||||
1 | FCC Registration Number (FRN) |
0009258708
|
||||
1 | Physical Address |
No.8, Sec.2, Guangfu Rd.
|
||||
1 |
Hsinchu, N/A 30071
|
|||||
1 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
RAX
|
||||
1 | Equipment Product Code |
WN4501M
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
S******** L******
|
||||
1 | Title |
Manager
|
||||
1 | Telephone Number |
886-3******** Extension:
|
||||
1 | Fax Number |
886-3********
|
||||
1 |
s******@arcadyan.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | WIRELESS USB ADAPTER 11g | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
SPORTON International Inc
|
||||
1 | Name |
K****** L******
|
||||
1 | Telephone Number |
886-2******** Extension:
|
||||
1 | Fax Number |
886-2********
|
||||
1 |
k******@sporton.com.tw
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.0500000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC