all | frequencies |
|
|
|
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|---|---|---|
manuals | photos | labels |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User Manual-3 | Users Manual | 201.78 KiB | April 03 2015 / May 03 2015 | |||
1 2 |
|
Users Manual-1 | Users Manual | 1.81 MiB | April 03 2015 / May 03 2015 | |||
1 2 |
|
Users Manual-2 | Users Manual | 2.76 MiB | April 03 2015 / May 03 2015 | |||
1 2 |
|
Internal Photos | Internal Photos | 2.66 MiB | April 03 2015 / May 03 2015 | |||
1 2 |
|
External Photos | External Photos | 2.03 MiB | April 03 2015 / May 03 2015 | |||
1 2 |
|
Label/Location Info-1 | ID Label/Location Info | 569.78 KiB | April 03 2015 / May 03 2015 | |||
1 2 |
|
Label/Location Info-2 | ID Label/Location Info | 434.91 KiB | April 03 2015 / May 03 2015 | |||
1 2 |
|
Confidentiality | Cover Letter(s) | 21.36 KiB | April 03 2015 / May 03 2015 | |||
1 2 |
|
Declaration of authorization | Cover Letter(s) | 31.66 KiB | April 03 2015 / May 03 2015 | |||
1 2 |
|
FCC DOC | Cover Letter(s) | 531.06 KiB | April 03 2015 / May 03 2015 | |||
1 2 | RF Exposure Info | April 03 2015 / May 03 2015 | ||||||
1 2 | Test Report | April 03 2015 / May 03 2015 | ||||||
1 2 | Test Setup Photos | April 03 2015 / May 03 2015 |
1 2 | User Manual-3 | Users Manual | 201.78 KiB | April 03 2015 / May 03 2015 |
HandlingInformation:
Senseisintendedforindooruseatreasonabletemperatures. Useasoft,clean,lintfreeclothtocleanSense.DonotcleanSenseoritscomponentswhile theyareconnectedtoapowersource.Donotuseliquidsorabrasivesolutions.Senseisnot waterproof. Batterydisposal:
Pleaserecycleordisposeofyourbatteryaccordingtoyourlocallawsandregulations. UnderwritersLaboratories(UL) TheSensepoweradapterhasbeentestedtocomplywithsafetystandardsintheUnited StatessetoutbyUnderwritersLaboratoriesInc.(UL).TheSensepoweradaptercomplies withthefollowingULstandards:
UL609501andCAN/CSAC22.2No.60950107 FCCComplianceStatement Thisdevicecomplieswithpart15oftheFCCrules.Operationissubjecttothefollowingtwo conditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemust acceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation. Note:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigital device,pursuanttopart15oftheFCCRules.Theselimitsaredesignedtoprovide reasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.Thisequipment generates,uses,andcanradiateradiofrequencyenergyand,ifnotinstalledandusedin accordancewiththeinstructions,maycauseharmfulinterferencetoradiocommunications. However,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation.If thisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,whichcanbe determinedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrectthe interferencebyoneormoreofthefollowingmeasures:
isconnected. Important:ChangesormodificationsnotexpresslyapprovedbyHello,Inc.couldvoidthe usersauthoritytooperatetheequipment. ThisequipmentcomplieswithFCCradiationexposurelimitssetforthforanuncontrolled environment.Thistransmittermustnotbecolocatedoroperatedinconjunctionwithany otherantennaortransmitter.Senseshouldbeinstalledandoperatedwithaminimum distanceof20centimetersbetweenthetransmitterandyourbody. Reorientorrelocatethereceivingantenna. Increasetheseparationbetweentheequipmentandreceiver. Connecttheequipmenttoanoutletonacircuitdifferentfromthattowhichthereceiver Consultthedealeroranexperiencedradio/TVtechnicianforhelp. CanadianRegulatoryStatement ThisdevicecomplieswithIndustryCanadalicenceexemptRSSstandard(s).Operationis subjecttothefollowingtwoconditions:(1)thisdevicemaynotcauseinterference,and(2)this devicemustacceptanyinterference,includinginterferencethatmaycauseundesired operationofthedevice. SenseandSleepPillmeettheexemptionfromtheroutineevaluationlimitsinsection2.5of RSS102andcompliancewithRSS102RFexposure.UserscanobtainCanadianinformation onRFexposureandcomplianceathttp://www.ic.gc.ca TheSensetransmittermustnotbecolocatedoroperatinginconjunctionwithanyother antennaortransmitter.Senseshouldbeinstalledandoperatedwithaminimumdistanceof 20centimetersbetweenthetransmitterandyourbody. ThisClassBdigitalapparatuscomplieswithCanadianICES003. Cetappareilestconformela/auxnorme(s)RSSsurlexemptiondelicencedIndustrie Canada.Sonutilisationestsubordonneauxdeuxconditionssuivantes:(1)cetappareilne doitpascauserdinterfrenceset(2)ildoitacceptertouteinterfrence,ycomprisles interfrencespouvantperturbersonfonctionnement. SenseandSleepPillestconformelexemptiondeslimitesdvaluationderoutinefigurant lasection2.5delanormeRSS102etlanormeRSS102surlexpositionauxRF.Les utilisateurspeuventsinformersurlesrglescanadiennesenmatiredexpositionauxRFet deconformitsurhttp://www.ic.gc.ca LmetteurSensenedoittrecoimplantouutilisenconjonctionavecaucuneautre antenneouaucunautremetteur.Sensedoittreinstalletutilisenmnageantune distancedaumoins20centimtresentrelmetteuretvous. CetappareilnumriquedeClasseBestconformelanormeICES003duCanada. CECertification Hello,Inc.isauthorizedtoapplytheCEMarktoitsSenseandSleepPillproducts,thereby declaringconformitytotherelevantprovisionsofthefollowingdirectives:
EMCDirective2004/108/EC LowVoltageDirective2006/95/EC R&TTEDirective1999/5/EC EcodesignrequirementsforEnergyRelatedProductsDirective2009/125/EC RoHSRecastDirective2011/65/EU TheCEmarkfortheSleepPillislocatedinsidethebatterycompartmentonitsbottompanel. EuropeanUnionDisposalandRecyclingInformationforUsers
[Insertsymbolofrubbishbin]
Thissymbolmeansyourproductshouldnotbedisposedofwithyournormalhousehold waste.Instead,youshouldprotecthumanhealthandtheenvironmentbyhandingoveryour wasteequipmenttoadesignatedcollectionpointfortherecyclingofwasteelectricaland electronicequipment.FormoreinformationabouthowtodisposeofyourSensewaste equipment,pleasecontactyourhouseholdwastedisposalservice. liminationetrecyclagedelUnioneuropenneInformationsauxusagers Cesymbolesignifiequevotreproduitnedoitpastreliminavecvosorduresmnagres habituelles.Vousdevezpluttconfierlamiseaurebutdevotredispositifunpointde collectedsignpourlerecyclagedesdchetsdquipementslectriquesetlectroniques, demanireprotgerlasanthumaineetlenvironnement.Pourobtenirdautres informationssurlafaondliminervotredispositifSenseusag,veuillezcontactervotre servicedliminationdesorduresmnagres. Australia/NewZealandRegulatoryComplianceMark(RCM) Hello,Inc.isauthorizedtoapplytheRCMmarktoitsSenseandSleepPillproducts,thereby declaringconformitytotherelevantprovisionsofthefollowingstandards:
AS/NZSCISPR22:2009 AS/NZS4268:2012 AS/NZS4665.1:2005
1 2 | Users Manual-1 | Users Manual | 1.81 MiB | April 03 2015 / May 03 2015 |
SURFboard SBR-AC1750 Wireless Router User Guide DRAFT 1.0 March 2015 2015 ARRIS Enterprises, Inc. All rights reserved. No part of this publication may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from ARRIS Enterprises, Inc. (ARRIS). ARRIS reserves the right to revise this publication and to make changes in content from time to time without obligation on the part of ARRIS to provide notification of such revision or change. ARRIS, SURFboard, and the ARRIS logo are all trademarks of ARRIS Enterprises, Inc. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and the names of their products. ARRIS disclaims proprietary interest in the marks and names of others. ARRIS provides this guide without warranty of any kind, implied or expressed, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. ARRIS may make improvements or changes in the product(s) described in this manual at any time. The capabilities, system requirements and/or compatibility with third-party products described herein are subject to change without notice. Table of Contents Chapter 1. Chapter 2. Chapter 3. Chapter 4. Chapter 5. Safety and Regulatory Information .............................................. 6 Getting Started .....................................................................10 What about Security ..................................................................................... 10 Ethernet or Wireless? .................................................................................... 11 In the Box ................................................................................................. 11 Additional Items You May Need ....................................................................... 11 System Requirements ................................................................................... 12 Recommended Hardware ........................................................................ 12 Windows ............................................................................................ 12 MacOS ............................................................................................... 12 Linux/other Unix .................................................................................. 12 Contact Information ..................................................................................... 12 Product Overview ..................................................................13 Front Panel ................................................................................................ 13 SBR-AC1750 Indicator Lights .................................................................... 14 Using the Reset Button ........................................................................... 15 Resetting the Router to Factory Defaults .................................................... 15 Rear Panel ................................................................................................. 15 Gateway Label ............................................................................................ 16 Installing the Router ...............................................................17 Desktop Mounting Instructions ......................................................................... 17 Cleaning Instructions ............................................................................. 17 Factors Affecting Wireless Range .............................................................. 18 Connect the SBR-AC1750 ............................................................................... 18 Configuring Your Ethernet Connection ........................................20 Requirements ............................................................................................. 20 How to use this Chapter ................................................................................ 20 TCP/IP Configuration for Windows XP ................................................................ 20 TCP/IP Configuration for Windows Vista ............................................................. 21 TCP/IP Configuration for Windows 7 or Windows 8 ................................................ 21 TCP/IP Configuration for MacOS X .................................................................... 22 Chapter 6. Troubleshooting Tips ..............................................................23 Solutions ................................................................................................... 23 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 3 This document is uncontrolled pending incorporation in an ARRIS CMS Chapter 7. Chapter 8. Basic Configuration ................................................................25 Accessing the Configuration Interface ........................................................ 25 Configuring Your Wireless Network ............................................................ 26 Enabling or Disabling the Wireless Network. ................................................ 26 Changing Your Login Password.................................................................. 26 Changing the Default Wireless Network Name (SSID) ...................................... 26 Configuring Wi-Fi Protected Setup (WPS) .................................................... 27 Troubleshooting Your Wireless Connection................................................... 27 Setting Up Your WAN Connection .............................................................. 30 Advanced Configuration ...........................................................32 LAN Setup Configuring DHCP ......................................................................... 32 LAN Setup Adding and Deleting DHCP Clients .............................................. 33 LAN Setup Selecting the NAT Mode ................................................................. 33 Wireless Setup Setting the Wireless Mode ......................................................... 33 Wireless Setup Setting the 802.11n Operation Mode ............................................ 34 Wireless Setup Using MAC Address Filtering ....................................................... 34 Finding the MAC Address of a Computer ...................................................... 35 Firewall General Firewall Configuration Settings ................................................ 36 Firewall Configuring a Virtual Server (Port Forwarding) ........................................ 36 Firewall Configuring Port Triggers .................................................................. 37 Firewall Configuring Client IP Filters ............................................................... 38 Firewall Configuring Client IPV6 Filters ............................................................ 38 Firewall Configuring DMZ for Gaming or Conferencing Applications .......................... 39 Utilities Viewing Network System Information .................................................... 40 Utilities Restarting the Router ....................................................................... 40 Utilities Reverting to Factory Default Settings ................................................... 40 Utilities Viewing the System Logs ................................................................... 41 Utilities DDNS ........................................................................................... 41 Chapter 9. Web GUI Screens Overview .......................................................42 Basic Setup ................................................................................................ 42 Basic Wireless Settings ........................................................................... 42 WPS Settings ....................................................................................... 43 WAN Setup ................................................................................................ 44 Dynamic ............................................................................................ 44 Static ................................................................................................ 45 DNS 45 Dynamic (IPV6) .................................................................................... 46 Static (IPV6) ........................................................................................ 47 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 4 This document is uncontrolled pending incorporation in an ARRIS CMS LAN Setup ................................................................................................. 48 LAN Settings ....................................................................................... 48 LAN Settings (IPV6) ............................................................................... 50 Client List .......................................................................................... 51 Wireless .................................................................................................... 53 Basic Setup ......................................................................................... 53 Guest Access ....................................................................................... 55 Advanced ........................................................................................... 56 StreamBoost .............................................................................................. 57 StreamBoost Settings ............................................................................. 57 Priorities ............................................................................................ 58 STAT: Downloads .................................................................................. 58 STAT: Up Time ..................................................................................... 59 Firewall .................................................................................................... 59 Firewall Settings .................................................................................. 59 Virtual Servers ..................................................................................... 60 DMZ .................................................................................................. 61 WAN Ping Blocking ................................................................................ 62 Remote Management ............................................................................. 62 ALG 63 Utilities .................................................................................................... 64 System Information ............................................................................... 64 Restart Router ..................................................................................... 65 Factory Default .................................................................................... 66 Firmware Upgrade ................................................................................ 66 System Settings .................................................................................... 67 System Log ......................................................................................... 68 DDNS................................................................................................. 68 Chapter 10. ARRIS Contact Information .......................................................70 Before You Call ARRIS Support......................................................................... 70 By Telephone ............................................................................................. 70 By Email ................................................................................................... 74 Ask ARRIS Customer Portal ............................................................................. 75 Global Knowledge Services and Training ............................................................ 75 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 5 This document is uncontrolled pending incorporation in an ARRIS CMS Chapter 1 Safety and Regulatory Information Important Safety Instructions Read This Before You Begin When using your equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
Read all of the instructions listed here and/or in the user manual before you operate this device. Give particular attention to all safety precautions. Retain the instructions for future reference. This device must be installed and used in strict accordance with manufacturers instructions, as described in the user documentation that is included with the device. Comply with all warning and caution statements in the instructions. Observe all warning and caution symbols that are affixed to this device. To prevent fire or shock hazard, do not expose this device to rain or moisture. The device must not be exposed to dripping or splashing. Do not place objects filled with liquids, such as vases, on the device. This device was qualified under test conditions that included the use of the supplied cables between system components. To ensure regulatory and safety compliance, use only the provided power and interface cables and install them properly. Different types of cord sets may be used for connections to the main POWER supply circuit. Use only a main line cord that complies with all applicable device safety requirements of the country of use. Installation of this device must be in accordance with national wiring codes and conform to local regulations. Operate this device only from the type of power source indicated on the devices marking label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. Do not overload outlets or extension cords, as this can result in a risk of fire or electric shock. Overloaded AC outlets, extension cords, frayed power cords, damaged or cracked wire insulation, and broken plugs are dangerous. They may result in a shock or fire hazard. Route power supply cords so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords where they are attached to plugs and convenience receptacles, and examine the point where they exit from the device. Place this device in a location that is close enough to an electrical outlet to accommodate the length of the power cord. Place the device to allow for easy access when disconnecting the power cord of the device from the AC wall outlet. Do not connect the plug into an extension cord, receptacle, or other outlet unless the plug can be fully inserted with no part of the blades exposed. Place this device on a stable surface. It is recommended that the customer install an AC surge protector in the AC outlet to which this device is connected. This is to avoid damaging the device by local lightning strikes and other electrical surges. Postpone installation until there is no risk of thunderstorm or lightning activity in the area. Do not use this product near water: for example, near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. Do not cover the device or block the airflow to the device with any other objects. Keep the device away from excessive heat and humidity and keep the device free from vibration and dust. Wipe the device with a clean, dry cloth. Never use cleaning fluid or similar chemicals. Do not spray cleaners directly on the device or use forced air to remove dust. For added protection, unplug the device from the wall outlet and disconnect the cables to avoid damage to this device due to lightning and power surges. Upon completion of any service or repairs to this device, ask the service technician to perform safety checks to determine that the device is in safe operating condition. Do not open the device. Do not perform any servicing other than that contained in the installation and troubleshooting instructions. Refer all servicing to qualified service personnel. This device should not be used in an environment that exceeds 104 F (40 C). 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 6 This document is uncontrolled pending incorporation in an ARRIS CMS SAVE THE ABOVE INSTRUCTIONS Note to CATV System Installer This reminder is provided to call the CATV system installers attention to Article 820.93 and 820.100 of the National Electric Code, which provides guidelines for proper grounding and, in particular, specifies that the Coaxial cable shield shall be connected to the grounding system of the building, as close to the point of cable entry as practical. FCC STATEMENTS FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the device and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. FCC CAUTION: Any changes or modifications not expressly approved by ARRIS for compliance could void the users authority to operate the equipment. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To comply with the FCC RF exposure compliance requirements, the separation distance between the antenna and any persons body (including hands, wrists, feet and ankles) must be at least 20 cm (8 inches). This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter except those already approved in this filing. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Cet emetteur ne doit pas etre Co-place ou ne fonctionnant en meme temps qu'aucune autre antenne ou emetteur. Cet equipement devrait etre installe et actionne avec une distance minimum de 20 centimetres entre le radiateur et votre corps The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destinations. The firmware setting is not accessible by the end user. INDUSTRY CANADA (IC) STATEMENT This device complies with Industry Canadas license-exempt RSSs. Operation is subject to the following two conditions:
This device may not cause interference, and This device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-3 (B)/NMB-3 (B) In Canada, RLAN devices are restricted from using the 5600-5650 MHz frequency band. CAUTION: To reduce the potential for harmful interference to co-channel mobile satellite systems, use of the 5150-5250 MHz frequency band is restricted to indoor use only. High power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 5650-5850 MHz frequency bands. These radars could cause interference and/or damage to License ExemptLocal Area Network (LE-LAN) devices. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 7 This document is uncontrolled pending incorporation in an ARRIS CMS AVIS D'INDUSTRIE CANADA (IC) Le present appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorisee aux deux conditions suivantes :
(1) lappareil ne doit pas produire de brouillage;
(2) lutilisateur de lappareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible den compromettre le fonctionnement. CAN ICES-3 (B)/NMB-3 (B) Au Canada, les appareils de rseau local sans fil ne sont pas autoriss utiliser les bandes de frquence 5600-5650 MHz. AVERTISSEMENT: afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux, les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation l'intrieur. Les radars haute puissance sont dfinis en tant qu'utilisateurs principaux (c.--d. prioritaires) des bandes de frquences 5250-5350 MHz et 5650-5850 MHz. Ces radars peuvent causer de l'interfrence ou des dommages susceptibles de nuire aux appareils exempts de licencerseau local (LAN-EL). Le dispositif rencontre l'exemption des limites courantes d'evaluation dans la section 2.5 de RSS 102 et la conformite a l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformite de rf. IC RADIATION EXPOSURE STATEMENT IMPORTANT NOTE: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. DCLARATION DE IC SUR L'EXPOSITION AUX RAYONNEMENTS NOTE IMPORTANTE: cet quipement est conforme aux limites d'exposition aux rayonnements tablies par IC pour un environnement non contrl. Cet quipement doit tre install et utilis de manire maintenir une distance d'au moins 20 cm entre la source de rayonnement et votre corps. WIRELESS LAN INFORMATION This device is a wireless network product that uses Direct Sequence Spread Spectrum (DSSS) and Orthogonal Frequency-Division Multiple Access (OFDMA) radio technologies. The device is designed to be interoperable with any other wireless DSSS and OFDMA products that comply with:
The IEEE 802.11 Standard on Wireless LANs (Revision B, Revision G, and Revision N), as defined and approved by the Institute of Electrical Electronics Engineers The Wireless Fidelity (Wi-Fi) certification as defined by the Wireless Ethernet Compatibility Alliance (WECA). Restrictions on the Use of Wireless Devices In some situations or environments, the use of wireless devices may be restricted by the proprietor of the building or responsible representatives of the organization. For example, using wireless equipment in any environment where the risk of interference to other devices or services is perceived or identified as harmful. If you are uncertain of the applicable policy for the use of wireless equipment in a specific organization or environment, you are encouraged to ask for authorization to use the device prior to turning on the equipment. The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of the devices included with this product, or the substitution or attachment of connecting cables and equipment other than specified by the manufacturer. Correction of the interference caused by such unauthorized modification, substitution, or attachment is the responsibility of the user. The manufacturer and its authorized resellers or distributors are not liable for any damage or violation of government regulations that may arise from failing to comply with these guidelines. Note: The use of the 5150-5250 MHz frequency band is restricted to Indoor Use Only. SECURITY WARNING: This device allows you to create a wireless network. Wireless network connections may be accessible by unauthorized users. For more information on how to protect your network, visit the ARRIS Support website at www.arris.com/consumer. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 8 This document is uncontrolled pending incorporation in an ARRIS CMS CARING FOR THE ENVIRONMENT BY RECYCLING When you see this symbol on an ARRIS product, do not dispose of the product with residential or commercial waste. Recycling your ARRIS Equipment Please do not dispose of this product with your residential or commercial waste. Some countries or regions, such as the European Union, have set up systems to collect and recycle electrical and electronic waste items. Contact your local authorities for information about practices established for your region. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 9 This document is uncontrolled pending incorporation in an ARRIS CMS Chapter 2 Getting Started The ARRIS SURFboard SBR-AC1750 Wireless Router is a 3x3 dual-band 11ac router, allowing users to connect to the Internet through a separate DOCSIS-compliant cable modem. With Qualcomm solution and StreamBoost application to provide best throughput in different applications. The SBR-AC1750 Wireless Router has the following features:
Remote management capability: allows you to make changes to your Wireless Router's configuration from anywhere on the Internet. Smart stream management: Qualcomm StreamBoostTM technology automatically gives applications and devices the bandwidth they need for the best online experience Convenience: supports Ethernet and 802.11a/b/g/n/ac wireless connections; both can be used simultaneously This guide provides a product overview and instructions for installing and configuring the SBR-AC1750. It also includes procedures for setting up secure wireless network connections and managing your SBR-AC1750 and network configurations. What about Security Having a high-speed, always-on connection to the Internet requires a certain amount of responsibility to other Internet usersincluding the need to maintain a reasonably secure system. While no system is 100% secure, you can use the following tips to enhance your systems security:
Keep the operating system of your computer updated with the latest security patches. Run the system update utility at least weekly. Keep your email program updated with the latest security patches. In addition, avoid opening email containing attachments, or opening files sent through chat rooms, whenever possible. Install a virus checker and keep it updated. Avoid providing web or file-sharing services over your Wireless Router. Besides certain vulnerability problems, most cable companies prohibit running servers on consumer-level accounts and may suspend your account for violating your terms of service. Use the cable companys mail servers for sending email. Avoid using proxy software unless you are certain that it is not open for abuse by other Internet users (some are shipped open by default). Criminals can take advantage of open proxies to hide their identity when breaking into other computers or sending spam. If you have an open proxy, your cable company may suspend your account to protect the rest of the network. The SBR-AC1750 ships with wireless LAN security set by default (for the same reasons that you should run only secured proxies). See the security label on your product for the factory security settings. If you need to modify the default wireless security settings, see Configuring Your Wireless Connection. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 10 This document is uncontrolled pending incorporation in an ARRIS CMS Ethernet or Wireless?
There are two ways to connect your computer (or other equipment) to the SBR-AC1750. The following will help you decide which is best for you:
Ethernet Ethernet is a standard method of connecting two or more computers into a Local Area Network (LAN). You can use the Ethernet connection if your computer has built-in Ethernet hardware. Note: To connect more than four computers to the SBR-AC1750 through the Ethernet ports, you need an Ethernet hub (available at computer retailers). The Wireless Router package comes with one 4-foot (1.2m) Ethernet cable (the connectors look like wide telephone connectors); you can purchase more cables if necessary at a computer retailer. If you are connecting the Wireless Router directly to a computer, or to an Ethernet hub with a cross-over switch, ask for Category 5e (CAT5e) straight-through cable. CAT5e cable is required for gigabit Ethernet (Gig-E), not regular CAT5 cable. In the Box Before installing the SBR-AC1750, check that the following items are included in the box. If any items are missing, please call ARRIS Technical Support at 1-877-466-8646. SBR-AC1750 Wireless Router Power Supply Ethernet Cable Software License &
Regulatory Card SBR-AC1750 Quick Start Guide Figure 1 SBR-AC1750 Package Contents Additional Items You May Need If you are installing the SBR-AC1750 yourself, make sure you have the following items on hand before continuing:
Wireless Router package: see In the Box for a list of items in the package. Ethernet Cable: In addition to the Ethernet cable provided, you will need an additional Ethernet cable. This is a standard Ethernet cable with RJ45 type connectors on both ends. Ethernet cables are available for purchase from any electronics retailer or discount store. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 11 This document is uncontrolled pending incorporation in an ARRIS CMS Information packet: your cable company should furnish you with a packet containing information about your service and how to set it up. Read this information carefully and contact your cable company if you have any questions. System Requirements The SBR-AC1750 Wireless Router operates with most computers. The following describes requirements for each operating system; see the documentation for your system for details on enabling and configuring networking. To use the Wireless Router, you need DOCSIS high-speed Internet service from your cable company. Telephone service requires that the cable company has PacketCable support. Recommended Hardware The following hardware configuration is recommended. Computers not meeting this configuration can still work with the SBR-AC1750, but may not be able to make maximum use of SBR-AC1750 throughput. CPU: P4, 3GHz or faster RAM: 1GB or greater Hard drive: 7200 RPM or faster Ethernet: Gig-E (1000BaseT) Windows Windows XP , Windows Vista, Windows 7, or Windows 8. A supported Ethernet or wireless LAN connection must be available. MacOS System 7.5 to MacOS 9.2 (Open Transport recommended) or MacOS X. A supported Ethernet or wireless LAN connection must be available. Linux/other Unix Hardware drivers, TCP/IP, and DHCP must be enabled in the kernel. A supported Ethernet or wireless LAN connection must be available. Contact Information For technical support or additional ARRIS product information:
Visit the ARRIS Support website: www.arris.com/consumer. Call ARRIS Technical Support: 1-877-466-8646 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 12 This document is uncontrolled pending incorporation in an ARRIS CMS Chapter 3 Product Overview Front Panel Figure 2 SBR-AC1750 Front View The SBR-AC1750 front panel has the following LEDs:
Power: indicates whether AC power is available to the unit. WAN: indicates the status of WAN connectivity. 2.4G: indicates the status of the 2.4 GHz wireless LAN. 5G: indicates the status of the 5 GHz wireless LAN. LAN (1 - 4): indicates the status of LAN connectivity. USB: indicates whether a USB device is attached. WPS: indicates Wireless Protected Setup (WPS) is active. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 13 This document is uncontrolled pending incorporation in an ARRIS CMS SBR-AC1750 Indicator Lights The Wireless Router has several LED indicator lights to assist in troubleshooting:
LED Color/Behavior Description Power Solid green System power is on. WAN Solid green An IP address has been received and is ready to transmit data, or bridge mode is active. Flashing green The Ethernet cable connection has been detected. Off No Ethernet cable is connected to the Wireless Router. 2.4G Wi-Fi Solid green The wireless port has linked with a wireless client. Wireless is disabled. 5G Wi-Fi Solid green The wireless port has linked with a wireless client. Wireless is disabled. WPS Solid green WPS has been started. Flashing green (slow flash) Flashing green (quick flash) LAN 1 4 Solid green WPS has been started, and Wireless Router is ready to accept a client connection. WPS error. NOTE TO REVIEWERS: What kind of error? What should the user do to correct it?
10/100/1000Mbps link detected. Flashing green Receiving/transmitting data at 10/100/1000Mbps. Off No Ethernet connection. USB Solid green USB device successfully connected and active. Flashing green USB device read/write activity. Off No USB device connected, or the attached USB device can now be safely removed. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 14 This document is uncontrolled pending incorporation in an ARRIS CMS Using the Reset Button Use the Reset button, on the back of the Wireless Router, to reset the Wireless Router and perform initialization as if you power cycled the unit. You may need to reset the Wireless Router if you are having problems connecting to the Internet. You will not use this button often. Use a pointed non-metallic object to press this button. The Reset button is recessed to prevent accidental resets. Resetting the Router to Factory Defaults To reset the router to factory defaults, press and hold the Reset button (1) on the back of the Wireless Router for more than fifteen seconds. This restores the wireless setup configuration and router configuration parameters to the factory defaults. You may need to do this if a configuration error has locked out all access. Rear Panel Figure 3 SBR-AC1750 Rear View The SBR-AC1750 rear panel has the following connectors and controls:
Reset button: resets the Wireless Router as if you power cycled the unit. Use a pointed non-
metallic object to press this button. USB: USB host connector - future support for external USB devices Ethernet (1 - 4): connectors for use with a computer LAN port. WAN: connector for the cable modem. Power: connector for the power cord. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 15 This document is uncontrolled pending incorporation in an ARRIS CMS Gateway Label Figure 4 SBR-AC1750 Label The gateway label is located on the bottom of the SBR-AC1750. It contains specific router ID information that you may need when contacting your service provider or ARRIS Technical Support. When contacting your service provider for assistance, you may need to provide the following information listed on the gateway label :
Router model name (SBG6900-AC) Router serial number (SN) 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 16 This document is uncontrolled pending incorporation in an ARRIS CMS Chapter 4 Installing the Router This product is for indoor use only. Do not route the Ethernet cable(s) outside of the building. Exposure of the cables to lightning could create a safety hazard and damage the product. There are a number of factors to consider when choosing a location to install your Wireless Router:
Is an AC outlet available nearby? For best results, the outlet should not be switched and should be close enough to the Wireless Router that extension cords are not required. Is the cable modem nearby? Can you easily run cables between the wireless routers location and the cable modem?
If you are connecting devices to the Ethernet ports, can you easily run cables between the Wireless Routers location and those devices?
If you want to mount the Wireless Router on a wall, does the location provide a solid surface for secure attachment? For best results when mounting the Wireless Router on drywall, position the Wireless Router so at least one of the screws are fastened to a stud. This may prevent the Wireless Router from pulling out of the wall in the future. If you want to install the Wireless Router on a desktop, is there enough space on either side to keep the vents clear? Blocking the vents may cause overheating. How close are your wireless devices? The Wireless Router wireless connection range is typically 100200 feet (30m65m). A number of factors can affect connection range, as described below. Desktop Mounting Instructions Position the Wireless Router so that:
Air flows freely around it. The rear faces the nearest wall. It will not fall to the floor if bumped or moved. The sides of the unit are not blocked. Cleaning Instructions Clean the Wireless Router using only a clean, slightly moistened, cloth. Do not use aerosols in the vicinity of the Wireless Router. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 17 This document is uncontrolled pending incorporation in an ARRIS CMS Factors Affecting Wireless Range A number of factors can affect the usable range for wireless connections. Increases range Decreases range Raising the unit above the devices (for example, installing the Wireless Router in the upper floor of a multi-story dwelling) Lowering the unit below the devices (for example, installing the Wireless Router in a basement) Metal or concrete walls between the Wireless Router and other devices Large metal appliances, aquariums, or metal cabinets between the Wireless Router and other devices Interference and RF noise (2.4 GHz wireless phones, microwave ovens, or other wireless networks) Note: Note that decreasing the range of your wireless network may be beneficial, as long as the decreased range is sufficient for your needs. By limiting your networks range, you reduce interference with other networks and make it harder for unwanted users to find and connect to your network. Note: Setting the transmit power level to High increases the range. Setting it to Medium or Low decreases the range proportionately. Connect the SBR-AC1750 Figure 5 SBR-AC1750 Connection Diagram 1. Unplug the power to turn off your cable modem. If your cable modem has a battery backup, remove the battery to be sure the cable modem is powered off. 2. Connect one end of the blue Ethernet cable (included) to your cable modem, and the other end to the WAN port on your Wireless Router. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 18 This document is uncontrolled pending incorporation in an ARRIS CMS 3. Reconnect the power cable on your cable modem to turn it back on. Wait approximately two minutes to allow your cable modem to fully power up. Replace the battery , if applicable. 4. Connect the power adapter (included) to the power connector on the back of the Wireless Router, and then connect the power adapter to an available AC outlet. Wait until the 2.4G and 5G LEDs on the front panel of the Wireless Router turn solid green. 5. To manage the setup of your Wireless Router, you can connect a computer using a second Ethernet cable (not provided). Or, you can connect wirelessly by using the preset wireless security settings printed on the security label located on the bottom of your Wireless Router. 6. Open a browser on your computer to access the management interface of the Wireless Router. If the webpage does not display correctly, try another browser. See Accessing the Configuration Interface (page 25) for more information. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 19 This document is uncontrolled pending incorporation in an ARRIS CMS Chapter 5 Configuring Your Ethernet Connection If your computer is equipped with a LAN card providing an Ethernet connection, you may have to configure your computers TCP/IP settings. The steps that follow will guide you through setting your computers TCP/IP settings to work with the Wireless Router. Requirements Make sure you have the following before attempting to configure your Ethernet connection:
Computer with Ethernet interface Ethernet cable (supplied) IP address, subnet, gateway, and DNS information for installations not using DHCP How to use this Chapter The following list shows the procedures for modifying the TCP/IP settings on the computer. The procedure is slightly different depending on the operating system that you are using. Please ensure you are using the correct steps for the operating system on your computer. Follow the links below for instructions to configure your Ethernet connection on your operating system. TCP/IP Configuration for Windows XP (page 20) TCP/IP Configuration for Windows Vista (page 21) TCP/IP Configuration for Windows 7 or Windows 8 (page 21) TCP/IP Configuration for MacOS X (page 22) TCP/IP Configuration for Windows XP Follow these steps to configure the Ethernet interface on a Windows XP operating system. TCP/IPv6 Note: This procedure shows the configuration of TCP/IPv4. TCP/IPv6 is not installed or enabled by default in Windows XP. If your cable provider requires TCP/IPv6 you must first install and enable it on your Windows XP system. Refer to Microsoft support materials on Windows XP for installation instructions. Once installed and enabled, follow this same configuration example, but select TCP/IPv6 at the appropriate step. 1. From the computer, select Start > Settings > Control Panel and double-click Network Connections in the Control Panel. The Network Connection window displays a list of LAN connections and associated network adapters. 2. Double-click the local area connection to be used for your devices network connection. The Local Area Connection Status widow displays. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 20 This document is uncontrolled pending incorporation in an ARRIS CMS 3. Click Properties. 4. Select TCP/IP by clicking it one time. Then click Properties. 5. Click the General tab. Then click Obtain an IP address automatically and click OK. 6. Click OK to accept the new settings, and OK again to close the Properties window. 7. You may have to restart your computer in order for your computer to obtain a new IP address from the network. TCP/IP Configuration for Windows Vista Follow these steps to configure the Ethernet interface on a Windows Vista operating system. 1. Open the Vista Control Panel. 2. Double-click Network and Sharing Center to display the Network and Sharing Center Window. 3. Click Manage network connections. If prompted for a connection, choose Local Area Connection. The Network Connections window displays. 4. Double-click the Local Area Connection to open the Properties window:
Note: If Windows requests permission to continue, click Continue. 5. Double-click Internet Protocol Version 4 (TCP/IPv4) to configure TCP/IPv4. Note: If your cable provider requires TCP/IP version 6, double-click Internet Protocol Version 6 (TCP/IPv6) to configure TCP/IPv6. The TCP/IP properties window for the version you selected displays. 6. For either TCP/IPv4 or TCP/IPv6, select Obtain an IP address automatically and Obtain DNS server address automatically, unless instructed otherwise by your cable provider. 7. Click OK to accept the new settings and close the Properties window. TCP/IP Configuration for Windows 7 or Windows 8 Follow these steps to configure the Ethernet interface on a Windows 7 or Windows 8 operating system. 1. Open the Windows Control Panel. 2. Click Network and Internet. 3. Click Network and Sharing Center. 4. Click Local Area Connection to open the Status window. 5. Click Properties to open the Properties window. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 21 This document is uncontrolled pending incorporation in an ARRIS CMS 6. Select Internet Protocol Version 4 (TCP/IPv4) and click Properties to configure TCP/IPv4. Note: If your cable provider requires TCP/IP version 6, select Internet Protocol Version 6 (TCP/IPv6) and click Properties to configure TCP/IPv6. The TCP/IP properties window for the version you selected displays. 7. For either TCP/IPv4 or TCP/IPv6, select Obtain an IP address automatically and Obtain DNS server address automatically, unless instructed otherwise by your cable provider. 8. Click OK to accept the new settings and close the Properties window. Then click Close to back out of the remaining setup screens. TCP/IP Configuration for MacOS X Follow these steps to configure the Ethernet interface on a MacOS X operating system. 1. Open System Preferences, either by choosing System Preferences from the Apple menu or by clicking the System Preferences icon in the dock. 2. Click the Network icon. 3. Choose Automatic from the Location drop-down menu, and Built-in Ethernet from the Show menu. 4. Choose the TCP/IP tab, if necessary. If you are using TCP/IPv4, go to step 5. If your cable provider requires TCP/IPv6, go to step 8. 5. Choose Using DHCP from the Configure IPv4 menu. 6. 7. Close the System Properties application. If necessary, click the Renew DHCP Lease button. TCP/IPv4 configuration is completed. If you are using TCP/IPv6, click Configure IPv6 near the bottom of the previous window. 8. 9. Choose Automatically from the Configure IPv6 drop-down menu and click OK. 10. Close the System Properties application. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 22 This document is uncontrolled pending incorporation in an ARRIS CMS Chapter 6 Troubleshooting Tips Solutions The Wireless Router is plugged in, but the Power light is Off Check all power connections. Is the power cord plugged in firmly at both ends?
If you plugged the power cord into a power strip, make sure the strip is switched on. Avoid using an outlet controlled by a wall switch, if possible. Finally, check the fuse or circuit breaker panel. I'm not getting on the Internet (all connections) It may take over 30 minutes to establish a connection the first time you power up your Wireless Router, especially when many people are online. Always leave your Wireless Router plugged into AC power and connected to the cable system. Check the front panel lights:
The Power and Online lights should be on. If the Power light blinks for more than 30 minutes, call your cable company for assistance. Check your cable connections. Connectors should be tight. The coax cable should not be pinched, kinked, or bent sharplyany of these can cause a break or short in the cable (you may have to replace the cable). If you have one or more splitters between the Wireless Router and CATV outlet, remove the splitters and connect the Wireless Router directly to the outlet. Proceed to the Ethernet or wireless solutions if necessary. I'm not getting on the Internet (Ethernet) If you are using a hub, is the hub turned on?
Are you using the right type of Ethernet cable? Use the supplied cable for direct connection to a computer; use a cross-over cable for connection to a hub. Press the Reset button on the back of the Wireless Router. A misconfiguration could lock out all access to the Wireless Router router. If you think this has happened, see Resetting the Router to Factory Defaults (page Error! Bookmark not defined.). I'm not getting on the Internet (Wireless) Check the indicator lights, see Using the Wireless Router the Wi-Fi light should be on. Does your connection utility discover your wireless LAN? If you turned off Broadcast SSID you need to manually enter the name of your wireless LAN in the connection utility. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 23 This document is uncontrolled pending incorporation in an ARRIS CMS Change your security mode to disabled. Enable one of the other security modes as soon as you find the problem. A misconfiguration could lock out all access to the SBR-AC1750. If you think this has happened, see Resetting the Router to Factory Defaults (page Error! Bookmark not defined.). My wireless Internet connection stops working sometimes This is usually caused by interference. Two common sources are 2.4GHz remote telephones and microwave ovens. If you cannot remove the interfering product, try using a different channel or setting Protected Mode. I can get on the Internet, but everything is slow If the Web site you are visiting is very popular, that site may be having trouble servicing all the requests. If other sites download quickly, wait for a few minutes and try again. Usage during peak hours may also affect the connection speed. Other communications on the LAN, or interference with wireless connections, may slow down your connection. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 24 This document is uncontrolled pending incorporation in an ARRIS CMS Chapter 7 Basic Configuration The router ships with a basic factory default configuration that should allow you to immediately access the Internet after installing the hardware according to your Users Guide. If you need to modify the routers default basic settings, or if you want to configure advanced settings, refer to the appropriate instructions in this document. As a minimum, it is recommended that you:
Change the default login password Change the default wireless network name, also called the Service Set Identifier (SSID) Wireless LAN Default Security Setting: The router ships with wireless LAN security set by default. See the security label on your product for the factory security settings: network name
(SSID), encryption method, network key, and WPS PIN. If you need to modify the routers default wireless security settings, or if you want to configure any other settings, refer to the appropriate instructions in this document. Note: You must set up your computer and other client devices to work with the security settings on the router. Refer to the documentation for your client device for instructions on setting security. If your computer or client device supports Wi-Fi Alliance WPS (Wireless Protected Setup), activate WPS on your computer or client device and the router simultaneously to easily set up your system security. Accessing the Configuration Interface Perform the following steps to access the configuration interface. 1. If security has been properly set up on your computer to access the wireless LAN on the router, use the connection utility for your operating system to connect to the wireless LAN using its network name (SSID), as shown on the security label. Note: If you cannot access the wireless LAN, you must first establish a wired Ethernet connection between your computer and the router. 2. In your web browser, type http://192.168.0.1/ to access the wireless router setup. The Login screen displays. 3. Enter the user name and password and click the Apply button to log in. Note: The default user name is "admin". The default password is "password", in lower case letters. The System Basic Setup screen displays. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 25 This document is uncontrolled pending incorporation in an ARRIS CMS 4. Set basic setup configuration parameters as required for your system. Note: Most configuration parameters that you may want to set can be accessed on the System Basic Setup screen or under the More LAN Settings or More Wireless Settings links. Configuring Your Wireless Network Perform the following procedures to make the basic configuration settings for your wireless network. Enabling or Disabling the Wireless Network. Perform the following steps to enable the wireless network. 1. Access and log into the configuration interface. 2. Click the Basic Setup tab. 3. Click the Enable Wireless checkbox in either the Wireless 2.4 Ghz section or the Wireless 5 GHz section to enable wireless networking for that frequency. 4. Click the Apply button. Changing Your Login Password You should change your login password to something other than the default password. Note: The default user name is "admin," the default password is "password" (both lower case). Perform the following steps to change your password. 1. Access and log into the configuration interface via a direct wired Ethernet or wireless connection. 2. Click the Utilities tab. 3. Click System Settings in the side menu. 4. Enter your old password in the Current Password field. 5. Enter your new password in both the New Password and Confirm New Password fields. Note: Passwords are case-sensitive. Valid characters are the numbers 0 to 9, the letters a through z and A through Z, and printable special characters (such as $, !, ?, &, #, @, and others.) 6. Click the Apply button. Changing the Default Wireless Network Name (SSID) While still on the Basic Setup screen, perform the following steps to change your wireless 2.4 GHz and/or wireless 5 GHz network name. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 26 This document is uncontrolled pending incorporation in an ARRIS CMS 1. Enter a unique user friendly name to identify your wireless network in the Wireless Network Name
(SSID) field under either Wireless 2.4 GHz or Wireless 5 GHz. Note: This name is also referred to as the Service Set Identifier (SSID). The name can be up to 32 characters long. 2. Click the Apply button at the bottom of the screen. Configuring Wi-Fi Protected Setup (WPS) WPS is a standard method for easily configuring a secure connection between your router and computers or other wireless devices (known as enrollees) that support WPS. When WPS is enabled you can attach other wireless devices by pressing the WPS buttons on the device (if equipped) and on your router, or by entering the enrollees PIN and then clicking the Start WPS Association icon. Perform the following steps to enable the wireless network. 1. Access and log into the configuration interface. 2. Click the Basic Setup tab. 3. Click WPS Settings in the side menu. 4. Click the Wi-Fi Protected Setup (WPS) Enable checkbox and click the Apply button to enable WPS on your system. 5. Select the mode from the WPS Mode drop-down menu. It can be set to PBC (Push Button Control) or PIN Code. If your client device has a WPS button, select PBC and go to step 6a. If your client device has a PIN number select PIN Code and go to step 6b. 6. a) If using PBC, press the WPS buttons on the client device and on your router simultaneously to start the WPS association. b) If using PIN codes, enter the enrollees PIN in the Enrollee PIN Code field, and then click the Start WPS Association icon. Enter the routers PIN code in the Device PIN Code field if requested during connection. 7. If the connection is successful, the WPS indicator light on the router stops flashing and remains lit. If unsuccessful, the WPS light continues to flash for up to two minutes (indicating that its ready to accept a client connection) and then turns off. If the WPS light turns off, start the association process over. Troubleshooting Your Wireless Connection The three main factors that affect wireless network performance are:
Range from the client devices Interference from other wireless devices Client device hardware/software configuration 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 27 This document is uncontrolled pending incorporation in an ARRIS CMS Factors Affecting Wireless Range How close are your wireless devices to your Wireless Router? The Wireless Routers wireless connection range is typically 100 to 200 feet (30m to 65m). Note: You should try to centralize the Wireless Router in relation to where the wireless client devices will usually be located. A number of factors can affect the usable range for wireless connections, as described in this table. Effect on Range Factor Increases range Raising the unit above the devices (for example, installing the Wireless Router in the upper floor of a multi-story dwelling) Decreases range Setting the transmit power level to High Lowering the unit below the devices (for example, installing the Wireless Router in a basement) Metal or concrete walls between the Wireless Router and client devices Large metal appliances, aquariums, or metal cabinets between the Wireless Router and client devices Interference and RF noise (2.4 GHz wireless phones, microwave ovens, or other wireless networks) Setting the transmit power level to Medium or Low Setting the wireless mode to 5 GHz reduces interference but also decreases range. Note: Decreasing the range of your wireless network may be beneficial, as long as the decreased range is sufficient for your needs. By limiting your networks range, you reduce interference with other networks and make it harder for unwanted users to find and connect to your network. Interference from Other Wireless Devices Interference from other equipment operating at 2.4 GHz or 5 GHz in the area of your wireless network can significantly affect the range and performance of your network, such as:
Cordless phones Wireless speakers Microwave ovens Baby monitors Gaming consoles, such as Wii, Xbox, and PlayStation Any other devices operating at 2.4 GHz or 5 GHz Note: If your cordless phones or other wireless devices are interfering with your wireless networks performance, replace them with a similar device that operates on a different frequency if possible. For example, change to 5.8 GHz cordless phones. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 28 This document is uncontrolled pending incorporation in an ARRIS CMS Client Device Hardware/Software Configuration Client device hardware/software configuration can also affect your wireless network performance. For example, your computers operating system, network adapter, processor, and hard drive access speed can all affect the transfer speeds that you experience across the network. If wireless performance is slow, check the following items. Verify which 802.11 Standard the Wireless Clients Can Use If your client device network adapters use the older 802.11b or 802.11g standards, you should upgrade them to the 802.11n standard. Network adapters using the older standards can reduce the performance of your entire network. 802.11b (becoming more rare but not extinct yet) is much slower than 802.11g, which is slower than 802.11n. The MAXIMUM theoretical limit for each standard is as follows. 802.11b: 11 Mbps 802.11g: 54 Mbps 802.11n: 130 Mbps to 450 Mbps (depending on the wireless router AND wireless client hardware) Note: Actual maximum throughput performance typically does not exceed 50% of the above values. Perform a Site Survey to Determine the Best Channel Use wireless network scanning software such as MetaGeeks free inSSIDer tool to see how many other wireless routers and access points are broadcasting. For wireless 2.4 GHz, try to find the cleanest channel among channels 1, 6, and 11. These are the only three channels that do not overlap. If there are no good options among channels 1, 6 and 11, you can try channel 4 or 8. However, selecting these channels can cause degraded throughput speeds if there is a lot of traffic on channel 1, 6, or 11. For wireless 5 GHz, choose a channel that is farthest away from the channel used by any other unit operating in the area. It is a trial and error process to find the best channel. The best setting may change at any time depending on all of the other wireless routers in the environment. Note: When Touchstone 16xx Gateways are set to Auto channel, they will automatically select the cleanest of the available channels upon boot up. Adjust the Gateways Wireless Configuration Settings Security Mode/Encryption Algorithm The recommended security mode/encryption algorithm is WPA2-PSK (AES) for best performance. All other options will result in degraded throughput speeds. For example, using WEP and WPA reduces throughput by approximately 80% comparatively. Note that Security Mode WEP and WPA are not compatible with the 802.11n standard. Performance would be limited to 802.11g speeds of 54mbps. Also, 802.11n requires WPA2 and AES. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 29 This document is uncontrolled pending incorporation in an ARRIS CMS Wireless Mode Set your wireless mode to optimize performance based on the type of network adapters being used by your network devices, e.g., 802.11b, 820.11g, and 802.11n. Select the proper mode to support all of the wireless devices that will connect to your router. Its best to have an environment with only one standard and set the Gateway to that standard. Since this is not always feasible, ONLY include the standards that are used in your environment. The presence of 802.11b devices in an active network will cause the greatest performance degradation. BG Protection This option allows you to properly operate 802.11b client devices in 802.11g networks. These older 802.11b devices required the unit to add overhead to most transmissions. Operation Mode The options are Mixed mode or Greenfield. Select Mixed mode if you network consists of a mix of 802.11 b, g, and n clients. Select Greenfield if your network consists of ONLY 802.11n clients. The Greenfield mode improves efficiency of networks using only 802.11n devices by eliminating support for the 802.11a/b/g client devices. Channel Bandwidth (802.11n only) Options are 20 MHz or 20/40 MHz . The default setting is 20 MHz. If your wireless network is in a very clean RF environment setting the Channel Bandwidth to 20/40 will increase your throughput by bonding two channels. However, if there are any other wireless routers or access points within range of the device it will stay in 20 MHz bandwidth regardless of this setting. This is a WiFi Alliance requirement. (You can verify the channel bandwidth by using the previously mentioned wireless network scanning software, MetaGeeks inSSIDer.) Guard Interval (802.11n only) This is the time in nanoseconds between symbols for 802.11n frames. Selecting 400ns provides higher throughput in networks where the coverage distance is small (indoors). Selecting 800ns provides higher throughput in networks where the coverage distance is large
(outdoors). Setting Up Your WAN Connection A Dynamic or DHCP (Dynamic Host Configuration Protocol) connection is the most commonly used WAN connection type. Note: Do not change this setting unless your Internet Service Provider tells you to use another connection type. Perform the following steps to change your connection type. 1. Access and log into the configuration interface. 2. Click the WAN Setup tab. 3. Click Dynamic, Dynamic (IPV6), Static, or Static (IPV6) in the side menu to display the appropriate screen for configuring that type of WAN connection. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 30 This document is uncontrolled pending incorporation in an ARRIS CMS 4. Set the required configuration parameters for the connection type you selected as provided by your Internet Service Provider. Note: Refer to WAN Setup in Web GUI Screens Overview (page 42) for specific instructions on setting the various connection type configuration parameters. 5. Click the Apply button at the bottom of the screen. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 31 This document is uncontrolled pending incorporation in an ARRIS CMS Chapter 8 Advanced Configuration The following are the most common advanced configuration options for your router:
WAN Setup LAN Setup Wireless Setup Firewall Utilities Note: Refer to Web GUI Screens Overview (page 42) for additional advanced configuration options. LAN Setup Configuring DHCP DHCP (Dynamic Host Protocol Configuration) is enabled by default on your router which allows your router to act as a DHCP server and automatically assign an IP address to each device on your network. DHCP is a set of rules used by devices such as a computer, router, or network adapter to allow the device to request and obtain an IP address from a server which maintains a list of addresses available for use. The DHCP server ensures that all IP addresses are unique, e.g., no IP address is assigned to a second device while the first device's assignment is valid (its lease has not expired). Without DHCP, the IP addresses must be entered manually at each computer or device and a new IP address must be entered each time it moves to a new location on the network. Perform the following steps to configure DHCP. 1. Access and log into the configuration interface. 2. Click the LAN Setup tab. 3. Click LAN Settings or LAN Settings (IPV6) in the side menu to display the LAN Settings screen. 4. Click the Enable DHCP Server checkbox under DHCP Server Settings. 5. Enter the Start IP Address and End IP Address for the range of IP addresses that the DHCP Server will be allowed to assign to a network device. 6. Enter the Lease Time in seconds before the assigned IP address will expire. (After the lease time is up, the user is automatically assigned a new dynamic IP address.) Note: Refer to LAN Setup (page 48) for specific instructions on setting the various DHCP configuration parameters. 7. Click the Apply button at the bottom of the screen. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 32 This document is uncontrolled pending incorporation in an ARRIS CMS LAN Setup Adding and Deleting DHCP Clients The DHCP Client screen shows the host Name, IP address, and MAC Address of each computer that is connected to your network. If a computer does not have a specified host name, then the host Name field will be blank. Perform the following steps to configure the DHCP Clients. 1. Access and log into the configuration interface. 2. Click the LAN Setup tab. 3. Click Client List in the side menu to display the Client List screen. 4. Click the Add button to add a reserved IP client. Select an existing DHCP client and then click the Delete button to delete the client. Click the Refresh button to update the Clients List. LAN Setup Selecting the NAT Mode NAT (Network Address Translation) allows your router to manipulate IP addresses so that just one single IP address can represent an entire group of computers on your network and let them all communicate with the Internet. This conserves IP addresses and is necessary since there are a finite number of available IP addresses for use. Perform the following steps to select the NAT Mode. 1. Access and log into the configuration interface. 2. Click the LAN Setup tab. 3. Click LAN Settings in the side menu to display the LAN Settings screen. 4. Select the NAT Mode from the NAT Mode field drop-down list. The optional modes are:
Bridged - Data will pass through the device directly without any routing. Routed with NAT - Data will be routed by the device and all the outgoing packets will be NATed. Routed without NAT - Data will be routed by the device but all the outgoing packets will not be NATed. 5. Click the Apply button at the bottom of the screen. Note: A dialog box displays Restarting your router is recommended when NAT settings change. Click OK to restart. Wireless Setup Setting the Wireless Mode You can set your wireless mode to optimize performance based on the type of network adapters being used by your network devices, e.g., 802.11b, 820.11g, and 802.11n. Select the proper mode to support all of the wireless devices that will connect to your router. Perform the following steps to set your wireless mode. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 33 This document is uncontrolled pending incorporation in an ARRIS CMS 1. Access and log into the configuration interface. 2. Click the Wireless 2.4 GHz and/or Wireless 5 GHz tab. 3. Click Advanced in the side menu to display the Advanced Settings screen. 4. Under Wireless Network Settings select the proper mode from the Wireless Mode drop-down list. 2.4 GHz Options: B/G mixed, B only, G only, N only, G/N mixed, and B/G/N mixed. 5 GHz Options: A/N mixed, A only, and N only. 5. Click the Apply button at the bottom of the screen. Note: Refer to Advanced (page 56) for instructions on setting additional advanced wireless configuration parameters. Wireless Setup Setting the 802.11n Operation Mode The 802.11 operation mode must be set to work properly with the selected wireless mode setting. The default setting, Mixed Mode, is for networks with a mix of 802.11b/g/n client devices. Mixed Mode can be used with any Wireless Mode setting. If all of your network devices are 802.11n devices, you can improve the efficiency of your network by setting the Wireless Mode to N only and setting the 802.11n operation mode to Greenfield. Perform the following steps to set your 802.11n operation mode. 1. Access and log into the configuration interface. 2. Click the Wireless 2.4 GHz tab. 3. Click Advanced in the side menu to display the Advanced Settings screen. 4. Under 802.11n Specific Settings select the proper mode from the Operation Mode drop-down list. Options are: Greenfield and Mixed Mode. 5. Click the Apply button at the bottom of the screen. Note: Refer to Advanced (page 56) for instructions on setting additional advanced wireless configuration parameters. Wireless Setup Using MAC Address Filtering MAC address filtering allows you to restrict access to your wireless network to those computers you specifically authorize to connect. This filter type is called an Allowed List. Optionally, you can block specific computers from accessing your network. This filter type is called a Blocked List. You have to choose one type or the other. Perform the following steps to set up MAC address filtering. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 34 This document is uncontrolled pending incorporation in an ARRIS CMS 1. Access and log into the configuration interface. 2. Click the Wireless 2.4 GHz and/or Wireless 5 GHz tab. 3. Click MAC Address Control in the side menu to display the MAC Address Control screen. 4. Under MAC Address Filtering select the proper filter type from the MAC Address Filter Type drop-down list. Options are: None, Allowed List, and Blocked List. 5. Under MAC Address Filter List click the Add button to display the Add MAC Address dialog box. 6. Enter the MAC address of a computer that you want to add to the filter list, and then click the Add MAC Address button. Note: If you dont know how to find your computers MAC address, see Finding the MAC Address of a Computer (page 35). 7. Repeat Step 6 for each MAC address you want to add. Note: To delete a MAC address, first select a MAC address in the list and then click the Delete button. 8. Click the Apply button. Finding the MAC Address of a Computer Use the specific operating system of your computer to find its MAC address, as follows. Windows:
From the Start menu, find and select the Control Panel. Double-click Network Connections
(Windows XP), or Network & Sharing Center (Windows Vista or Windows 7). Then double-click either Wireless Network Connection for a wireless connection, or Local Area Connection for an Ethernet connection. Next click the Details button (Windows Vista or Windows 7), or click the Support tab and then the Details button (Windows XP). The Physical Address line shows the MAC address. MacOS X:
Open System Preferences and click the Network icon. To find the Ethernet MAC address, select Built-
in Ethernet from the Show drop-down, then click the Ethernet tab. The Ethernet ID field shows the MAC address. To find the wireless MAC address, select Airport from the Show drop-down, then click the Airport tab. The Airport ID field shows the MAC address. Linux:
Open a shell window and type /sbin/ifconfig (and press Enter). The wireless interface is eth1 (unless there is no Ethernet adapter, in which case the interface is eth0). 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 35 This document is uncontrolled pending incorporation in an ARRIS CMS Firewall General Firewall Configuration Settings Your router is equipped with a firewall that will protect your network from a wide array of common hacker attacks, including Ping of Death (PoD) and Denial of Service (DoS) attacks. You can also configure VPN pass-through to enable VPN tunneling using IPSec, PPTP, or L2TP protocols to pass through the routers firewall so that you can connect to a Virtual Private Network at your office, for example. You can disable the firewall function if needed. Turning off the firewall protection will not leave your network completely vulnerable to hacker attacks, but it is recommended that you enable the firewall whenever possible. Perform the following steps to enable the firewall and make general firewall settings. 1. Access and log into the configuration interface. 2. Click the Firewall tab. 3. Click Firewall Settings in the side menu to display the Firewall Settings screen. 4. Check the Enable Firewall checkbox to enable the firewall on your network. 5. Check the Enable DoS Attack Protection Firewall checkbox to protect against DoS attacks. 6. Check the Enable Ping Blocking checkbox to protect against PoD attacks. 7. Check the Enable IPSec Pass Through checkbox to allow IPSec tunnels to pass through the router. 8. Check the Enable PPTP Pass Through checkbox to allow PPTP tunnels to pass through the router. 9. Check the Enable L2TP Pass Through checkbox to allow L2TP tunnels to pass through the router. 10. Check the Enable Block Fragmented IP Packets checkbox to block fragmented IP packets. 11. Click the Apply button at the bottom of the screen. Firewall Configuring a Virtual Server (Port Forwarding) The port forwarding function forwards inbound traffic from the Internet to a specified single device on your network. Examples include allowing access to a web server on your network, peer-to-peer file sharing, applications that allow remote access to your computer, some gaming and videoconferencing applications, and others. If you have a server in your network that you want to make available to the general Internet, you can configure a virtual server. The firewall passes requests from the Internet to the designated computer on your network. This function works by allowing you to route external (Internet) calls for services such as a web server (port 80), FTP server (Port 21), or other applications through your router to your internal network. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 36 This document is uncontrolled pending incorporation in an ARRIS CMS Perform the following steps to configure a virtual server. 1. Access and log into the configuration interface. 2. Click the Firewall tab. 3. Click Virtual Servers in the side menu to display the Virtual Server Configuration screen. 4. Check the Add button to display the Add Virtual Server dialog box. 5. Enter the following parameters in the dialog box. Description Enter a name for the virtual server. Inbound Port Enter the inbound port range for the virtual server. It should be the same range as the local port. Format Sets the format for the port. Options are TCP, UDP, or BOTH. Private IP Address Enter the IP address of the machine on the LAN that you want the connections to go to. Local Port Enter the local port range for the virtual server. It should be the same range as the inbound port. 6. Click the Add Virtual Server button to add the virtual server. Note: To delete a virtual server, first select a virtual server in the list and then click the Delete button. Firewall Configuring Port Triggers Port triggering lets you set the router to watch outgoing traffic for specific port numbers, remember the IP address of the sending computer, and then route the data back to the sending computer when the requested data returns. This is typically used for online gaming and online chat applications. Perform the following steps to add a port trigger. 1. Access and log into the configuration interface. 2. Click the Firewall tab. 3. Click Port Triggers in the side menu to display the Port Triggers screen. 4. Check the Add button to display the Add Port Trigger dialog box. 5. Enter the following parameters in the dialog box. Description Enter a name for the port trigger. Outbound Port Enter the outbound port range for the port trigger. It should be the same range as the inbound port. Format Sets the format for the port. Options are TCP, UDP, or BOTH. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 37 This document is uncontrolled pending incorporation in an ARRIS CMS Inbound Port Enter the inbound port range for the port trigger. It should be the same range as the outbound port. 6. Click the Add Port Trigger button to add the port trigger. Note: To delete a port trigger, first select a port trigger in the list and then click the Delete button. Firewall Configuring Client IP Filters The router can be configured to restrict access to the Internet, email, or other network services at specific days and times. Perform the following steps to add a client IP filter. 1. Access and log into the configuration interface. 2. Click the Firewall tab. 3. Click Client IP Filters in the side menu to display the Client IP Filter Configuration screen. 4. Check the Add button to display the Add Client IP Filter dialog box. 5. Enter the following parameters in the dialog box. Client IP Address Enter the client IP address or range to filter. Port Enter the outbound traffic port number range, starting and ending. Type Sets the port type. Options are TCP, UDP, or BOTH. Day Click the check boxes for the days you want access allowed, or click the All Week checkbox for all week. Time Sets the start time and end time for the allowed access during the specified days (24-hour clock). 00:00 to 24:00 indicates all day, or click the checkbox for All Day. 6. Click the Add Client IP Filter button to add the filter. Note: To delete a client IP filter, first select a client IP filter in the list and then click the Delete button. Firewall Configuring Client IPV6 Filters The router can be configured to restrict access to the Internet, email, or other network services. Perform the following steps to add a client IPV6 filter. 1. Access and log into the configuration interface. 2. Click the Firewall tab. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 38 This document is uncontrolled pending incorporation in an ARRIS CMS 3. Click Client IPV6 Filters in the side menu to display the Client IPV6 Filter Configuration screen. 4. Check the Add button to display the Add Client IP Filter dialog box. 5. Enter the following parameters in the dialog box. Action/Direction - Select either Allow+Incoming or Deny+Outgoing to allow data watching this filter and watch incoming data or deny data watching and watch outgoing data. Client IP Address Enter the range of IPV6 addresses to filter. Port Enter the outbound traffic port number range, starting and ending. Type Sets the port type. Options are TCP, UDP, or BOTH. Day Click the check boxes for the days you want access allowed, or click the All Week checkbox for all week. Time Sets the start time and end time for the allowed access during the specified days (24-hour clock). 00:00 to 24:00 indicates all day, or click the checkbox for All Day. 6. Click the Add Client IP Filter button to add the filter. Note: To delete a client IP filter, first select a client IP filter in the list and then click the Delete button. Firewall Configuring DMZ for Gaming or Conferencing Applications The DMZ feature allows you to specify one computer on your network to be placed outside of the NAT firewall. This may be necessary if the NAT feature is causing problems with an application such as a game or video conferencing application. Use this feature only on a temporary basis. The computer in the DMZ is not protected from hacker attacks. Perform the following steps to put a computer in the DMZ. 1. Access and log into the configuration interface. 2. Click the Firewall tab. 3. Click DMZ in the side menu to display the DMZ Settings screen. 4. Enter the following parameters. Enable DMZ Click this checkbox to enable DMZ on your network. WAN IP Displays the public IP address. Private IP Enter the IP address of the computer to be placed in the DMZ. Be sure that the address is not in the range of addresses delivered by the DHCP server if enabled. After placing the computer in the DMZ, all ports on the computer are open to the Internet and not protected. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 39 This document is uncontrolled pending incorporation in an ARRIS CMS 5. Click the Apply button at the bottom of the screen. Note: To remove the computer from the DMZ, delete the entries and uncheck the Enable DMZ checkbox. Utilities Viewing Network System Information You can view status and system information for your network on the Utilities System Information screen. Perform the following steps to view system status information. 1. Access and log into the configuration interface. 2. Click the Utilities tab. 3. Click System Information in the side menu to display the System Information screen. Note: Refer to System Information (page 64) for an explanation of the various status information parameters. Utilities Restarting the Router It may be necessary to restart (reboot) the router if it begins working improperly. Restarting the router will not delete any of your configuration settings. Perform the following steps to restart the router. 1. Access and log into the configuration interface. 2. Click the Utilities tab. 3. Click Restart Router in the side menu to display the Restart Router screen. 4. Click the Restart button to restart the router. Utilities Reverting to Factory Default Settings This function restores all of the routers configuration settings to the factory default setting. Before restoring the factory defaults, you should back up your current configuration settings using the Save/Backup Settings function. Perform the following steps to revert to factory default settings. 1. Access and log into the configuration interface. 2. Click the Utilities tab. 3. Click Factory Defaults in the side menu to display the Factory Defaults screen. 4. Click the Factory Defaults button to reset the router to factory default settings. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 40 This document is uncontrolled pending incorporation in an ARRIS CMS Utilities Viewing the System Logs The Utilities - System Logs screen displays the system logs. Perform the following steps to configure the system logs. 1. Access and log into the configuration interface. 2. Click the Utilities tab. 3. Click System Logs in the side menu to display the System Logs. When viewing the logs, click the Refresh button to update the list. Click the Clear Log button to clear the list. Utilities DDNS DDNS (Dynamic DNS) allows you to provide Internet users with a fixed domain name (instead of an IP address which may periodically change). This allows your gateway and applications set up in your gateway's virtual servers to be accessed from various locations on the Internet without knowing your current IP address. Requirements In order to use DDNS you must first create an account with a DDNS provider. The DDNS provider maps your chosen domain name to your IP address. Once your account is established, perform the following steps to enable DDNS. 1. Access and log into the configuration interface. 2. Click the Utilities tab. 3. Click DDNS in the side menu to display the DDNS configuration screen. 4. Click the DDNS Enable checkbox. Note: Refer to DDNS (page 68) for specific instructions on setting the various DDNS configuration parameters. 5. After setting the necessary configuration parameters, click the Apply button at the bottom of the screen. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 41 This document is uncontrolled pending incorporation in an ARRIS CMS Chapter 9 Web GUI Screens Overview This section provides an overview of the ARRIS graphical user interface (GUI) router setup screens. Each of the following tabs in the GUI and their individual sub-menus and configuration parameters are explained in detail:
Basic Setup WAN Setup LAN Setup Wireless StreamBoost Firewall Utilities Basic Setup Basic Wireless Settings While your system has many configuration options, the options on this Basic Setup page are those required by most users. Click the tabs to access the other configuration pages to set advanced options. Hover the mouse pointer over the question mark icon next to an option to view a description of that option. For changes to take effect, you must click the Apply button. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 42 This document is uncontrolled pending incorporation in an ARRIS CMS Wireless 2.4 GHz/Wireless 5 GHz:
Enable Wireless Click this checkbox to enable the wireless network on your system. Wireless Network Name (SSID) Enter a user friendly name to identify your wireless network. This name is also referred to as the Service Set Identifier (SSID). The name can be up to 32 characters long. Password Sets your password. Use a password that will not be easy to guess. Passwords are case-
sensitive. Valid characters are the numbers 0 to 9, the letters a through z and A through Z, and printable special characters (such as $, !, ?, &, #, @, and others). You must click the Apply button to save your new password. Note: You must be logged into the configuration interface via a direct wired Ethernet connection to change your password. WPS Settings Wi-Fi Protected Setup (WPS) is the industry standard method to simplify the security setup and management of Wi-Fi networks. You can now easily set up and connect to a WPA-enabled 802.11 network with WPS-certified devices using either a Personal Information Number (PIN) or the Push Button Configuration (PBC) method. Legacy devices without WPS can be added to the network using the traditional manual configuration method. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 43 This document is uncontrolled pending incorporation in an ARRIS CMS WPS Enable/Disable Wireless 2.4 GHz/Wireless 5 Ghz Click the frequency for which you want to enable WPS. WPS Enable Click this checkbox to enable WPS on your system. WPS is a standard method for easily configuring a secure connection between your router and computers or other wireless devices
(known as enrollees) that support WPS. When WPS is enabled you can attach other wireless devices by pressing the WPS buttons on the device (if equipped) and on your router, or by entering the enrollees PIN and then clicking the Start WPS Association icon. PIN Method:
Enrollee PIN Code If your client device has a WPS PIN number, enter it here, then click Enrolle. Device PIN Code Enter this code on your computer if requested during connection. PBC Method:
Start PBC Click to start the PBC connection process. WAN Setup Dynamic A dynamic connection type is the most common. The Wireless Router gets its IP address from a DHCP server at the cable company. If you are not sure of your connection type, use this type. For changes to take effect, you must click the Apply button. DHCP Enable DHCP Click this checkbox to enable a DHCP connection for your system. Host name This field displays the host name of the Wireless Router. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 44 This document is uncontrolled pending incorporation in an ARRIS CMS Static A static IP address connection type is less common than others and uses a permanent IP address to connect to the Internet. If your Internet Service Provider gives you an IP address that never changes, then use this option. For changes to take effect, you must click the Apply button. Static IP Settings:
Enable Static IP Click this checkbox to enable a static IP address connection for your system. IP Address Enter the IP address assigned by your ISP or static IP operation. Subnet Mask Enter the subnet mask assigned for your device by your ISP or static IP operation. Gateway Address Enter the gateway address assigned for your device by your ISP or static IP operation. Click here to enter your DNS Settings If your ISP gave you specific DNS settings, click here to go to the DNS Settings screen to enter those settings. DNS 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 45 This document is uncontrolled pending incorporation in an ARRIS CMS If your ISP gave you specific DNS settings, use this screen to enter them. DNS Settings Automatic from ISP Click this checkbox if your Wireless Router should automatically get its DNS settings from your ISP. Primary DNS Server IP Enter the IP address of the primary DNS server. Secondary DNS Server IP Enter the IP address of the secondary DNS server. Dynamic (IPV6) This screen enables a DHCPv6 configured IPV6 stack. A dynamic connection type is the most common. The router gets its IP address from a DHCP server at the cable company. If you are not sure of your connection type, use this type. For changes to take effect, you must click the Apply button. Dynamic Configuration (IPV6):
Enable DHCP (IPV6) Click this checkbox to enable a DHCP (IPV6) connection for your system. IP Address V6 This field displays the IPV6 address automatically assigned by the MSO. An IPV6 address has eight groups of four hexadecimal digits (0-9, a-f). The groups are separated by colons (:) e.g. 2001:0db8:85a3:0000:0000:8a2e:0370:7334. A double colon (::) is shorthand for an address of all zeros. Delegated Prefix This field displays the assigned IPV6 prefix to be used by addresses allocated in the local network. Delegated Prefix Length This field displays the assigned IPV6 prefix length. IPV6 Gateway Address This field displays the gateway address. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 46 This document is uncontrolled pending incorporation in an ARRIS CMS Static (IPV6) This screen enables a statically configured IPV6 stack. A static IP address connection type is less common than others and uses a permanent IP address to connect to the Internet. If your Internet Service Provider gives you an IP address that never changes, then use this option. For changes to take effect, you must click the Apply button. Static IP Settings (IPV6):
Enable Static IPV6 - Click this checkbox to enable a static IPV6 address connection for your system. IP Address V6 Enter the IPV6 address assigned by your ISP or static IP operation. An IPV6 address has eight groups of four hexadecimal digits (0-9, a-f). The groups are separated by colons (:) e.g. 2001:0db8:85a3:0000:0000:8a2e:0370:7334. A double colon (::) is shorthand for an address of all zeros. Prefix Length (IPV6) The length of the network portion of this address. IPV6 Gateway Address Enter the gateway address assigned for your device by your ISP or static IP operation. Primary DNS Server (IPV6) Enter the IPV6 address of the primary DNS server. Your ISP will provide this information. Secondary DNS Server (IPV6) Enter the IPV6 address of the secondary DNS server. Your ISP will provide this information. Domain Name The entry here will be displayed as the domain name on your client devices. It can be specified by your ISP or by you. Delegated Prefix The network portion of the IPV6 addresses to be allocated to local clients. Delegated Prefix Length The length of the network portion of the IPV6 addresses to be allocated to local clients. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 47 This document is uncontrolled pending incorporation in an ARRIS CMS LAN Setup LAN Settings You can make changes to the Local Area Network (LAN) configuration here. For changes to take effect, you must click the Apply button. Note: You can optionally set up the system so that there is more than one LAN in your network. This is most useful for commercial applications, not home use. All of the "LAN Setup" and "Wireless Setup"
configuration parameters can be set independently for each individual LAN. LAN IP Settings:
IP Address This field displays the IP address of your LAN. Subnet Mask This field displays the subnet mask of your LAN. DHCP Server Settings:
Enable DHCP Server Click this checkbox to enable the use of a Dynamic Host Configuration Protocol
(DHCP) Server on your network. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 48 This document is uncontrolled pending incorporation in an ARRIS CMS DHCP is a set of rules used by devices such as a computer, router, or network adapter to allow the device to request and obtain an IP address from a server which maintains a list of addresses available for use. The DHCP server ensures that all IP addresses are unique, e.g., no IP address is assigned to a second device while the first device's assignment is valid (its lease has not expired). Without DHCP, the IP addresses must be entered manually at each computer in an organization and a new IP address must be entered each time a computer moves to a new location on the network. Start IP Address Enter the starting address in the range of IP addresses that the DHCP Server will be allowed to assign to a network device. End IP Address Enter the ending address in the range of IP addresses that the DHCP Server will be allowed to assign to a network device. Lease Time Enter the lease time in seconds before the assigned IP address will expire. (After the lease time is up, the user is automatically assigned a new dynamic IP address.) DHCP uses the concept of a "lease" or amount of time that a given IP address will be valid for a computer or other network device. The lease time can vary depending on how long a user is likely to require the Internet connection at a particular location. Using very short leases, DHCP can dynamically reconfigure networks where there are more computers than available IP addresses, such as educational environments. Domain Name This field displays the domain name. NAT:
NAT Mode Select the NAT Mode. Routed with NAT - Data will be routed by the device and all the outgoing packets will be NATed. Routed without NAT - Data will be routed by the device but all the outgoing packets will not be NATed. Bridged - Data will pass through the device directly without any routing. UPnP:
Enable UPnP Click this checkbox to enable UPnP (Universal Plug and Play) on the system. Advertisement Time To Live IGMP Proxy:
Enable IGMP Proxy Click this checkbox to enable the IGMP (Internet Group Management Protocol) proxy on the system. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 49 This document is uncontrolled pending incorporation in an ARRIS CMS LAN Settings (IPV6) This screen configures LAN side support for IPV6. You can make changes to the Local Area Network
(LAN) configuration here. For changes to take effect, you must click the Apply button. Note: You can optionally set up the system so that there is more than one LAN in your network. This is most useful for commercial applications not home use. All of the "LAN Setup" and "Wireless Setup"
configuration parameters can be set independently for each individual LAN. LAN Settings (IPV6):
IP Address (IPV6) This field displays the IPV6 address of your LAN. An IPV6 address has eight groups of four hexadecimal digits (0-9, a-f). The groups are separated by colons (:) e.g. 2001:0db8:85a3:0000:0000:8a2e:0370:7334. A double colon (::) is shorthand for an address of all zeros. Prefix Length V6 Length of the network portion of the IPV6 address. Link Local Address (IPV6) IPV6 address that can be used only on this network. DHCP Server Settings (IPV6):
Enable DHCP Server (IPV6) Click this checkbox to enable the use of a V6 Dynamic Host Configuration Protocol (DHCP) Server on your network. DHCP is a set of rules used by devices such as a computer, router, or network adapter to allow the device to request and obtain an IP address from a server which maintains a list of addresses available for use. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 50 This document is uncontrolled pending incorporation in an ARRIS CMS The DHCP server ensures that all IP addresses are unique, e.g., no IP address is assigned to a second device while the first device's assignment is valid (its lease has not expired). Without DHCP, the IP addresses must be entered manually at each computer in an organization and a new IP address must be entered each time a computer moves to a new location on the network. Start IP Address (IPV6) Enter the starting address in the range of IPV6 addresses that the DHCP Server will be allowed to assign to a network device. End IP Address (IPV6) Enter the ending address in the range of IPV6 addresses that the DHCP Server will be allowed to assign to a network device. Lease Time V6 Enter the lease time in seconds before the assigned IPV6 address will expire. (After the lease time is up, the user is automatically assigned a new dynamic IP address.) DHCP uses the concept of a "lease" or amount of time that a given IP address will be valid for a computer or other network device. The lease time can vary depending on how long a user is likely to require the Internet connection at a particular location. Using very short leases, DHCP can dynamically reconfigure networks where there are more computers than available IP addresses, such as educational environments. DNS Relay Settings (IPV6):
Enable DNS Relay (IPV6) Click this checkbox to enable DNS Relay and mask the DNS address. Click this checkbox to enable Domain Name System (DNS) relay functionality on your system. The DNS Relay feature allows the system to act as a DNS server to other IP stations, while it simply forwards the requests to real DNS servers and then sends their responses back to the original requesters. Your gateway basically acts as an intermediate between the requester and the real DNS servers. When DNS Relay is enabled, the gateway will act as a DNS server, send requests to the Internet Service Provider's DNS server, and cache the information for later access. When DNS relay is disabled, the computer will pull domain name/IP address information directly from the ISP's DNS server. Client List 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 51 This document is uncontrolled pending incorporation in an ARRIS CMS This page shows the host Name, IP address, and MAC Address of each computer that is connected to your network. If a computer does not have a specified host name, then the host Name field will be blank. Note: You can optionally set up the system so that there is more than one LAN in your network. This is most useful for commercial applications not home use. All of the "LAN Setup" and "Wireless Setup"
configuration parameters can be set independently for each individual LAN. Static Client List:
Click the Add button to create a new fixed client lease. IP Address Enter the clients IP address. Name Enter a name for the client. MAC Address Enter the clients MAC address. Select a client and then click the Delete button to delete the client lease. Attached Client List:
Click the Refresh button to update the client list. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 52 This document is uncontrolled pending incorporation in an ARRIS CMS Wireless Basic Setup While your system has many configuration options, the options on this Basic Setup page are those required by most users. Click the tabs to access the other configuration pages to set advanced options. Hover the mouse pointer over the question mark icon next to an option to view a description of that option. For changes to take effect, you must click the Apply button. Note: You can optionally set up the system so that there is more than one LAN in your network. This is most useful for commercial applications not home use. All of the "LAN Setup" and "Wireless Setup"
configuration parameters can be set independently for each individual LAN. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 53 This document is uncontrolled pending incorporation in an ARRIS CMS Wireless 2.4 GHz/Wireless 5 GHz Enable Wireless Click this checkbox to enable the wireless network on your system. Channel Sets a communications channel for your router. The default setting is "Auto", in which the router selects a channel with the least amount of interference to use. For 2.4 GHz, if you manually select a channel, its best to choose channel 1, 6, or 11, since these channels do not overlap. If another unit is operating in the area, choose a channel that is farthest away from the channel that unit uses. For example, if one is using channel 11, set yours to channel 1. For 5 GHz choose a channel that is farthest away from the channel used by any other unit operating in the area. If you experience interference or poor performance on a particular channel, try a different channel. Wireless Network Name (SSID) Enter a user friendly name to identify your wireless network. This name is also referred to as the Service Set Identifier (SSID). The name can be up to 32 characters long. Wireless Mode Sets the wireless mode. 2.4 GHz Options are: B/G mixed, B only, G only, and G/N mixed. 5 GHz Options are: A only, A/N mixed, and A/N/AC mixed. Select the proper mode to support all of the wireless devices that will connect to your router. (802.11b supports bandwidth up to 11 Mb/s. 802.11g supports bandwidth up to 54 Mb/s. 802.11n supports bandwidth up to 300 Mb/s. 802.11ac support bandwidth up to 1.3Gb/s.) Channel Bandwidth Sets the 802.11n Channel Bandwidth. Options are 20 MHz, 40MHz,20/40 MHz, or 80 MHz (5 GHz only). The default setting is 20/40 MHz. Broadcast Network Name (SSID) Click this checkbox to allow the SSID to be broadcast by the router. If enabled, your SSID could be obtained allowing unauthorized access to your network. If you would like others not to see your access point, uncheck the checkbox to hide the SSID. AP Isolation Click this checkbox to enable AP isolation. When enabled each of your wireless clients will be in its own virtual network and will not be able to communicate with one another. This may be useful if you have many quests using your network. Enable WMM Click this checkbox to enable Wi-Fi Multimedia (WMM) functionality. Enabling WMM can help control latency and jitter when transmitting multimedia content over a wireless connection. Disabling WMM will reduce wireless performance in 802.11n mode. This quality of service mechanism uses four access categories, which in order of priority are: voice, video, best effort, and background. This ensures that applications with low tolerance for latency and jitter are treated with higher priority than less-sensitive data applications. WMM sets different wait times for the four categories in order to provide priority network access for applications that are less tolerant of packet delays. Security Mode Sets the security mode for your router. Can be set to OPEN (no security) WEP
(64/128) (Wired Equivalency Privacy 64/128) (poor security), WPA/WPA2-PSK (TKIP/AES) (Wi-Fi Protected Access/ Wi-Fi Protected Access 2 Pre-Shared Key TKIP/AES encryption) (most compatible), WPA2-PSK (AES) (Wi-Fi Protected Access 2 Pre-Shared Key AES encryption)
(recommended), WPA Enterprise, or WPA2 Enterprise. 802.11n performance is only available in Open or WPA2 with AES encryption. Pre-Shared Key - Sets your WPA Pre-Shared Key. This text string is used to generate a unique set of encryption keys for your network. Enter a text string in this field. The key can be either ASCII (text) or Hex (hexadecimal). An ASCII text key can be from 8 to 63 characters long. Valid characters are numbers "0" through "9" and letters "a" through "z", and printable special characters (such as $, !, ?, &, 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 54 This document is uncontrolled pending incorporation in an ARRIS CMS
#, @, and others). A hexadecimal key must be 64 characters long. Valid characters are numbers "0"
through "9" and letters "a" through "f". Guest Access Guest access allows access to the Internet through the WAN port, but it limits guests from accessing the internal network, LAN, and WLAN. The feature is supported both on 2.4 GHz and 5 GHz. Wireless 2.4 GHz/Wireless 5 GHz:
Guest SSID Guest Access Enable Click this checkbox to enable guest access for your system. Wireless Network Name (SSID) Enter a user friendly name to identify the guest wireless network. This name is also referred to as the Service Set Identifier (SSID). The name can be up to 32 characters long. Security mode Sets the security mode for your router. Available options are WPA/WPA2-PSK or Open. Pre-Shared Key Sets your WPA Pre-Shared Key. This text string is used to generate a unique set of encryption keys for your network. Enter a text string in this field. The key can be either ASCII (text) or Hex (Hexadecimal). An ASCII text key can be from 8 to 63 characters long. Valid characters are numbers 0 through 9 and letters a through z as well as most other characters. A hexadecimal key must be 64 characters long. Valid characters are numbers 0 through 9 and letters a through f. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 55 This document is uncontrolled pending incorporation in an ARRIS CMS Advanced The Advanced Settings page is used to set up the routers advanced wireless functions. These settings should only be adjusted by an expert administrator since incorrect settings can reduce wireless performance. For changes to take effect, you must click the Apply button. Wireless 2.4 GHz/Wireless 5 GHz:
Note: These older 802.11b devices required the unit to add overhead to most transmissions. Performance will increase if no 802.11b devices are present and this feature is disabled (OFF). The unit will auto detect 802.11b devices and set the feature accordingly when the BG protection checkbox is checked (AUTO). Beacon Interval Sets the time interval between beacon transmissions in milliseconds. The router uses these transmissions to synchronize the wireless network and its client devices. For compliance with most client devices, the Beacon Interval should remain set at the default of 100ms. The allowable setting range is from 20 to 1024ms. DTM Interval Sets the DTIM (Delivery Traffic Indication Message) Interval. The DTIM Interval informs the wireless client devices of the next available window for listening to broadcast and multicast messages. When the router sends a DTIM beacon the client devices hear the beacon and then listen for the messages. For compliance with most client devices, the DTIM Interval should be left at 1 ms. The allowable setting range is from 1 to 255 ms. RTS Threshold Sets the packet size limit. When the threshold is passed, the ready to send/clear to send (RTS/CTS) function is invoked. The default setting is 2347 bytes. The allowable setting range is from 1 to 2347 bytes. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 56 This document is uncontrolled pending incorporation in an ARRIS CMS Fragment Threshold Sets the fragmentation threshold. This threshold should be set to equal the maximum Ethernet frame size allowable on the link including overhead. Setting a lower threshold can damage data throughput since large frames could be fragmented and/or collisions could occur. The default setting is 2346. The allowable setting range is from 256 to 2346 bytes. Guard Interval The spacing between transmission of symbols in nanoseconds. Can be set to AUTO, 400ns or 800ns. The default is AUTO. Selecting 400ns provides higher throughput in networks where the coverage distance is small (indoors). Selecting 800ns provides higher throughput in networks where the coverage distance is large (outdoors). StreamBoost StreamBoost Settings The StreamBoost Settings screen lets users configure the StreamBoost Quality of Service (QoS) settings. StreamBoost is used to improve the online experience for connected clients based on the devices they use and the applications they are running. From this screen, the administrator can control and test the throughput limits in the downstream and upstream directions. StreamBoost Settings:
StreamBoost Enable Click this checkbox to enable StreamBoost technology. Auto Bandwidth Detection Click this checkbox to enable Auto Bandwidth Detection. Up Limit (Mbps) Down limit (Mbps) NOTE TO REVIEWERS: What do I need to say about Up Limit and Down Limit? What do these fields do?
Bandwidth Test Click this button to run the bandwidth test. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 57 This document is uncontrolled pending incorporation in an ARRIS CMS Keep StreamBoost Up to Date:
Enable Automatic Update Click this checkbox to enable automatic StreamBoost updates during your initial 3-year manufacturer service term. The service term will begin on the date of manufacture and run for three years or until April 1st, 2017, whichever comes first. (After the 3-year period, the manufacturer may make further updates available via firmware updates.) StreamBoost updates may improve your router's Internet traffic management capabilities through better traffic identification and bandwidth management techniques. In exchange, your Wireless Router will provide anonymous, performance-related information to the StreamBoost server for improved future StreamBoost service. Priorities Set bandwidth priority at the connected device level to ensure that your most important client devices have access to the bandwidth they need to perform well. STAT: Downloads Observe how bandwidth is being used in your local network on a per-device and per-application level. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 58 This document is uncontrolled pending incorporation in an ARRIS CMS NOTE TO REVIEWERS: What should users do with this screen? Will the dropdown boxes at the bottom be labeled in any way?
STAT: Up Time Observe how bandwidth is being used in your local network on a per-device and per-application level. Firewall Firewall Settings Your router is equipped with a firewall that will protect your network from a wide array of common hacker attacks, including Ping of Death (PoD) and Denial of Service (DoS) attacks. You can disable the firewall function if needed. Turning off the firewall protection will not leave your network completely vulnerable to hacker attacks, but it is recommended that you enable the firewall whenever possible. For changes to take effect, you must click the Apply button. Firewall Enable/Disable:
Enable Firewall Click this checkbox to enable the firewall on your system. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 59 This document is uncontrolled pending incorporation in an ARRIS CMS Virtual Servers The port forwarding function forwards inbound traffic from the Internet to a specified single device on your network. Examples include allowing access to a web server on your network, peer-to-peer file sharing, some gaming and videoconferencing applications, and others. This function allows you to route external (Internet) calls for services such as a web server (port 80), FTP server (Port 21), or other applications through your router to your internal network. Click the Add button to add a virtual server. Select a virtual server from the list and click the Delete button to delete a virtual server. Virtual Servers:
Service List Select the kind of service you would like to set up, and click Add. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 60 This document is uncontrolled pending incorporation in an ARRIS CMS Clear Entry To clear an entry from the Virtual Servers Table, select the entry that you want to clear and click Clear. Virtual Servers Table:
Description Enter a name for the virtual server. Inbound Port Enter the inbound port range for the virtual server. It should be the same range as the local port. Type Sets the format for the port. Options are TCP, UDP, or BOTH. Private IP Address Enter the IP address of the machine on the LAN that you want the connections to go to. Private Port Enter the private port range for the virtual server. It should be the same range as the inbound port. DMZ The DMZ feature allows you to specify one computer on your network to be placed outside of the NAT firewall. This may be necessary if the NAT feature is causing problems with an application such as a game or video conferencing application. Use this feature only on a temporary basis. The computer in the DMZ is not protected from hacker attacks. To put a computer in the DMZ, click the Enable DMZ checkbox, enter its IP address, and click the Apply button. IP Address Of Virtual DMZ Host:
Enable DMZ Click this checkbox to enable DMZ on your network. Static IP Displays the Static IP address. Private IP Enter the IP address of the computer to be placed in the DMZ. Be sure that the address is not in the range of addresses delivered by the DHCP server if enabled. After placing the computer in the DMZ, all ports on the computer are open to the Internet and not protected. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 61 This document is uncontrolled pending incorporation in an ARRIS CMS WAN Ping Blocking You can configure the Wireless Router not to respond to an ICMP Ping (ping to the WAN port). This offers a heightened level of security. Block ICMP Ping:
Block ICMP Ping Enable Click this checkbox to enable WAN Ping Blocking. Remote Management Remove management lets you make changes to your Wireless Router's settings from anywhere on the Internet. Before you enable this function, make sure you have set the administrator password. Remote Management Settings:
Remote Management Enable Click this checkbox to enable the Remote Management feature. Remote IP Settings Select Any to allow management connections from any IP address, or select IP Range to specify a range of IP addresses that can connect. Remote IP Address From/To Use these fields to enter the IP addresses that can connect to make changes to your settings. You must set Remote IP Settings to IP Range to activate these fields. Remote Access Port Enter the port that you would like to use for remote access. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 62 This document is uncontrolled pending incorporation in an ARRIS CMS ALG Application layer gateway settings allow the router to recognize and treat certain network protocols specially. Application Layer Gateway:
Click the checkbox for each network protocol for which you want special handling. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 63 This document is uncontrolled pending incorporation in an ARRIS CMS Utilities System Information This page shows a summary of your systems status. Hardware Software Version:
Serial Number This field displays the product serial number. Bootcode Version This field displays the bootcode version. Hardware Version This field displays the hardware version. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 64 This document is uncontrolled pending incorporation in an ARRIS CMS Firmware Version This field displays the firmware version. WAN Status Summary:
WAN MAC Address This field displays the WAN MAC address. Connection Setup This field displays the connection type: Dynamic or Static IP Address This field displays the WAN IP address. Subnet Mask This field displays the WAN subnet mask. Primary DNS This field displays the Primary DNS IP address. Secondary DNS This field displays the Secondary DNS IP address. Gateway This field displays the gateway IP address. LAN Status Summary:
MAC Address This field displays the LAN MAC Address. IP Address This field displays the IP Address of your LAN. Subnet Mask This field displays the subnet mask of your LAN. DHCP Server This field displays the status of the DHCP Server: Enabled or Disabled. Other Features Summary:
Firewall Settings - This field displays the status of the firewall settings: Enabled or Disabled. SSID This field displays the status of the SSID Broadcast function: Enabled or Disabled. Security This field displays the status of the Security feature: Enabled or Disabled. UPNP This field displays the status of the UPnP feature: Enabled or Disabled. Remote Management This field displays the status of the Remote Management feature: Enabled or Disabled. WPS This field displays the status of the WPS function: Enabled or Disabled. Guest Access This field displays the status of the Guest Access function: Enabled or Disabled. Guest SSID Guest Password (PSK) Restart Router 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 65 This document is uncontrolled pending incorporation in an ARRIS CMS It may be necessary to restart (reboot) the router if it begins working improperly. Restarting the router will not delete any of your configuration settings. To restart the router, click the Restart button. Note: A dialog box displays "This will restart your router. Current connections and telephony may be interrupted." Click OK to restart now or click Cancel to restart later. Factory Default This function restores all of the routers configuration settings to the factory default setting. Before restoring the factory defaults, you should back up your current configuration settings using the Save/Backup Settings page. NOTE TO REVIEWERS: The text on this screen says that users can backup their settings. How do they do that?
Click the Factory Defaults button to restore the factory default configuration settings. Note: A dialog box displays "This will restore your router to its factory state. Any customizations you have made will be lost. Current connections and telephony may be interrupted." Click OK to restore now or click Cancel to restore later. Firmware Upgrade 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 66 This document is uncontrolled pending incorporation in an ARRIS CMS From time to time, ARRIS may release new versions of firmware for the Wireless Router. Firmware updates contain improvements and fixes to problems that may have existed. Click the link below to see if there is a new firmware update available for this <TSProductType). System Settings This page allows you to make certain system settings. For changes to take effect, you must click the Apply button. Administrator Login:
Current Password Enter your old password to change your password. New Password/Confirm New Password Enter your new password in both fields to change your password. Login Timeout Enter the number of seconds that these web pages can remain idle before the user is logged out. Time And Time Zone:
Current Time Displays the current time. Current Language Select the language you want to use. Time Zone Select your time zone. Daylight Savings Click this checkbox to automatically update the system clock for Daylight Saving Time. Primary NTP Server The host name or IP address of the primary NTP server. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 67 This document is uncontrolled pending incorporation in an ARRIS CMS Secondary NTP Server The host name or IP address of the secondary NTP server. System Log This page displays the system logs. Click the Refresh button to update the list. Click the Clear Log button to clear the list. DDNS 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 68 This document is uncontrolled pending incorporation in an ARRIS CMS DDNS (Dynamic DNS) allows you to provide Internet users with a fixed domain name (instead of an IP address which may periodically change). This allows your <TSProductNameLowerCase> and applications set up in your virtual servers to be accessed from various locations on the Internet without knowing your current IP address. For changes to take effect, you must click the Apply button. Note: You must first create an account with a DDNS provider in order to use DDNS. The DDNS provider maps your chosen domain name to your IP address. DDNS Setting:
DDNS Enable Click this checkbox to enable DDNS on your system. DDNS Service Sets the DDNS provider that our account is with. The options are DynDNS and TZO. User Name Enter the user name for your DDNS account. Password Enter the password for your DDNS account. (Provided by your DDNS provider.) Domain Name Enter the domain name you selected to use with your DDNS account. 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 69 This document is uncontrolled pending incorporation in an ARRIS CMS Chapter 10 ARRIS Contact Information ARRIS offers broadband service providers a complete, integrated, application-oriented IP suite of back-
office automation tools for network content, subscriber, and workforce management as well as advanced advertising and on demand services. Before You Call ARRIS Support When working with Technical Support, you can help us to expedite your call by following these guidelines:
Please be prepared to give your Technical Support Contract ID number whenever you contact ARRIS Technical Support. If you do not know your Technical Support Contract ID number or have questions about a support contract, please contact ARRIS Technical Services at:
services.orders@arris.com or 678 473-8302. Be prepared to provide your name, company name, site location, serial number of the system you are calling about (if applicable), system and software version numbers, and as much detail about the problem as possible. Review available documentation, including release notes, product and installation manuals, and online help for information about your problem. Do not reboot or restart equipment or software processes prior to consulting with ARRIS Technical Supportvital data that could assist in resolving the problem can be lost when these actions are performed. All personnel who call Technical Support should have a high level of familiarity with the ARRIS system, including knowing the system passwords. We strongly recommend that you have personnel trained through ARRIS Educational Services programs. ARRIS Technical Support supports ARRIS-supplied products only. Issues related to other hardware, software, or non-ARRIS networks must be addressed by your organization or the appropriate third-
party vendor. By Telephone North America Region Legacy ARRIS Legacy Motorola Home
+1 888 221 9797 (North America)
+1 678 473 5656 (Worldwide)
+ 1 888 944 4357 (North America)
+1 215 323 2345 (Worldwide) 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 70 This document is uncontrolled pending incorporation in an ARRIS CMS Latin America Region:
Argentina:
Aruba:
Bolivia:
Brazil:
Chile:
Colombia:
Costa Rica:
Ecuador:
El Salvador:
Honduras:
Mexico:
Panama:
Peru:
Puerto Rico:
Rep. Dominicana:
Venezuela:
Legacy Motorola Home 0 800 666 3601 Legacy Motorola Home 215 323 2346 Legacy Motorola Home 800 100 694 Legacy Motorola Home 0 800 891 5314 Legacy ARRIS
+55 11 2737 7629 Legacy Motorola Home 1230 020 5564 Legacy ARRIS
+56 2 678 4500 Legacy Motorola Home 1 8005 1 80947 Legacy ARRIS
+57 1 381 9103 Legacy Motorola Home 215 323 2346 Legacy Motorola Home 215 323 2346 Legacy Motorola Home 800 6625 Legacy Motorola Home 800 0123, then 866 842 0264 Legacy Motorola Home 001 866 391 2349 Legacy ARRIS Legacy Motorola Home 001 800 203 4345 Legacy Motorola Home 0 800 5 3651 Legacy Motorola Home 866 862 2627 Legacy Motorola Home 1 888 751 8898 Legacy Motorola Home 0 800 100 9161 01 800 522 7747 or +52 55 22828531 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 71 This document is uncontrolled pending incorporation in an ARRIS CMS Europe Region:
+31 20 311 2525 Europe:
Legacy ARRIS Belgium:
Legacy Motorola Home 0 800 72 163 Denmark:
Legacy Motorola Home 80 88 6748 Finland:
Legacy Motorola Home 0 800 114 263 France:
Legacy Motorola Home 0 800 90 7038 Germany:
Legacy Motorola Home 0 800 18 73019 Legacy Motorola Home 06 800 18164 Hungary:
Ireland:
Legacy Motorola Home 1 800 55 9871 1 809 25 2071 Israel Golden Lines: Legacy Motorola Home Israel Bezeq:
Legacy Motorola Home 1 809 42 9181 Legacy Motorola Home Israel Barak:
1 809 31 5435 Legacy Motorola Home 800 788 304 Italy:
Luxembourg:
Legacy Motorola Home 0 800 2 5310 Legacy Motorola Home 0 800 022 0176 Netherlands -
Holland:
Norway:
Poland:
Portugal:
Spain:
Sweden:
Switzerland:
United Kingdom:
Legacy Motorola Home 800 15 670 Legacy Motorola Home 00 800 111 3671 Legacy Motorola Home 800 81 3461 Legacy Motorola Home 900 99 1771 Legacy Motorola Home 020 79 0241 Legacy Motorola Home 0 800 561 872 Legacy Motorola Home 0 800 404 8439 Asia Region:
Asia Japan Region:
Japan:
Legacy ARRIS Legacy Motorola Home
+86 755 8634 9110
+1 847 725 4011 (Worldwide) Legacy ARRIS Legacy Motorola Home
+81 3 5461 7320
+1 847 725 4011 (Worldwide) 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 72 This document is uncontrolled pending incorporation in an ARRIS CMS Korea Region:
Korea:
China Region:
Legacy ARRIS Legacy Motorola Home
+82 31 740 4203
+1 847 725 4011 (Worldwide) China:
Legacy ARRIS Legacy Motorola Home Australia / New Zealand Region:
+86 755 8634 9110 or 4008810685 (in China only)
+1 847 725 4011 (Worldwide) Australia /
New Zealand Legacy ARRIS
+86 755 8634 9110 Legacy Motorola Home 61 3 81997220 or 1800 242664
(Australia only) 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 73 This document is uncontrolled pending incorporation in an ARRIS CMS By Email North America - Headend and Network Equipment:
RF Optics:
Ruckus, Optics, Amps, Nodes, Transmitters, CHP, Passives, OptiMax, CoreWave, CoreView RFOptics-support@arris.com CMTS Products:
CMTS Product:
Moxi and WHS Products:
D5 and DVS Products:
DVS Products:
EMP Products:
C3, C4, ICO, ASA, CxM, CMTS1000, CMTS1500, E6000 BSR, SRM4, HSIM4, TX32, RX48, SRM10G Moxi, MCR, Portal, WHS, WHS5225, MediaPlayer, Whole Home Solution, Gateway D5, Application Manager, VIPr, Hemi, Encore, Quartet, Prelude, EGT or DVS CAS, DACs, CASMR, APEX3000, NC2000, DreamGallery, Secure Media, VideoFlow, AVP100, STBs, AS-RAC, QT Plus, CherryPicker, Encoder, Astria AdEdge, APS, BEQ6XXX, BME50, BMR1200, CVEx, MSP2XXX, RMS, SBSS, SVA, VMS Digital Ad Insertion: Ad Insertion, Skyvision, Spots, ACM, n5, Assurance Products: ServAssure, OpsLogic, Powersense, XMS Video OnDemand, VOD, nABLE, CMM, n5, XMS, Transit B1 Video Server, M3 Video Server, cDVR Video Solution WorkAssure, I&R, SageQuest, Wireless Matrix, Tech Director, Tech Calendar, SSM Alarms SALIVE, EventAssure, HouseCheck, Data Warehouse, Starnodes GPON, POL, Carrier Ethernet DSR, Uplink, IPTV, Encoder Legacy ARRIS Products Legacy Motorola Home Legacy ARRIS Products Video on Demand:
VOD Products:
WorkAssure:
GPON Product:
Satellite and Modular Systems:
Korea:
Korea:
Australia / New Zealand:
Australia / New Zealand:
365-095-27433 x.1 techsupport.na@arris.com tac.helpdesk@arris.com techsupport.na@arris.com techsupport.na@arris.com tac.helpdesk@arris.com emp-support@arris.com ai-support@arris.com vod-support@arris.com tac.helpdesk@arris.com workassure-support@arris.com assurance-support@arris.com tac.helpdesk@arris.com tac.helpdesk@arris.com techsupport.korea@arris.com tac.helpdesk@arris.com techsupport.asia@arris.com Legacy Motorola Home support.anz@arris.com This document is uncontrolled pending incorporation in an ARRIS CMS SBR-AC1750 Wireless Router User Guide 74 Customer Premise Equipment:
Touchstone Products: TGxxx, TMxxx, Touchstone, TTM, Packet Ace, Cornerstone, HDT, Incognito, CableModem, eMTA, Telephone Gateway Cable Modem, MTA CableModem:
International (All Products):
Latin America:
Latin America:
Europe:
Europe:
Asia:
Asia:
Japan:
Japan:
Legacy ARRIS Products Legacy Motorola Home Legacy ARRIS Products Legacy Motorola Home Legacy ARRIS Products Legacy Motorola Home Legacy ARRIS Products Legacy Motorola Home Ask ARRIS Customer Portal The Ask ARRIS Customer Portal enables you to:
techsupport.na@arris.com tac.helpdesk@arris.com techsupport.cala@arris.com tac.helpdesk@arris.com techsupport.europe@arris.com tac.helpdesk@arris.com techsupport.asia@arris.com tac.helpdesk@arris.com techsupport.japan@arris.com tac.helpdesk@arris.com Use innovative search technology to deliver fast, relevant, reliable information exactly when you need it, 24x7 Manage technical support cases for your products, support level, and site location Access technical documentation and webcasts To use the portal, you will need to register for the site using your support contract ID and email address. To access the customer portal:
http://www.arris.com/support Global Knowledge Services and Training For more information about Global Knowledge Services and the programs we offer, e-mail us at:
training@arris.com 365-095-27433 x.1 SBR-AC1750 Wireless Router User Guide 75 This document is uncontrolled pending incorporation in an ARRIS CMS ARRIS Enterprises, Inc. 3871 Lakefield Drive Suwanee, GA 30024 USA www.arris.com 365-095-27433 x.1 3/15
1 2 | Users Manual-2 | Users Manual | 2.76 MiB | April 03 2015 / May 03 2015 |
Touchstone TR3300-AC 802.11ac Wireless Router User Guide Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide Release 33 STANDARD 1.5 ARRIS Copyrights and Trademarks ARRIS Enterprises, Inc. 2015 All rights reserved. No part of this publication may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from ARRIS Enterprises, Inc. (ARRIS). ARRIS reserves the right to revise this publication and to make changes in content from time to time without obligation on the part of ARRIS to provide notification of such revision or change. ARRIS and the ARRIS logo are all trademarks of ARRIS Enterprises, Inc. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and the names of their products. ARRIS disclaims proprietary interest in the marks and names of others. ARRIS provides this guide without warranty of any kind, implied or expressed, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. ARRIS may make improvements or changes in the product(s) described in this manual at any time. The capabilities, system requirements and/or compatibility with third-party products described herein are subject to change without notice. Patent Notice Protected under one or more of the following U.S. patents: http://www.arris.com/legal Other patents pending. Table of Contents Chapter 1. Overview.............................................................................. 6 Introduction.................................................................................................6 Chapter 2. Chapter 3. Chapter 4. Chapter 5. Safety Requirements ............................................................... 7 FCC Part 15 .................................................................................................7 RF Exposure ..........................................................................................8 Industry Canada Compliance.............................................................................8 For Mexico...................................................................................................9 Product Overview..................................................................10 About The Wireless Router ............................................................................. 10 What's in the Box?........................................................................................ 10 Items You Need........................................................................................... 10 System Requirements ................................................................................... 11 Recommended Hardware ........................................................................ 11 Windows ............................................................................................ 11 MacOS ............................................................................................... 11 Linux/other Unix .................................................................................. 11 About this Manual........................................................................................ 11 What About Security? ................................................................................... 12 Installing the Wireless Router ...................................................13 Front Panel................................................................................................ 13 Indicator Lights for the TR3300-AC ................................................................... 14 Rear Panel................................................................................................. 15 Selecting an Installation Location..................................................................... 15 Desktop Mounting Instructions.................................................................. 16 Factors Affecting Wireless Range .............................................................. 16 Ethernet or Wireless?.................................................................................... 17 Connecting the Wireless Router ....................................................................... 18 Configuring the Wireless Connection ................................................................. 18 Basic Configuration ................................................................19 Accessing the Configuration Interface ............................................................... 19 Configuring the Wireless Network .................................................................... 20 Enabling or Disabling the Wireless Network.................................................. 20 Changing the Login Password ................................................................... 20 Changing the Default Wireless Network Name (SSID) ...................................... 21 Configuring Wi-Fi Protected Setup (WPS) .................................................... 21 Setting Up the WAN Connection................................................................ 22 Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 3 Chapter 6. Advanced Configuration Options................................................23 LAN Setup Configuring DHCP ......................................................................... 23 LAN Setup Adding and Deleting DHCP Clients.............................................. 24 LAN Setup Selecting the NAT Mode ................................................................. 24 Wireless Setup Setting the Wireless Mode ......................................................... 24 Firewall General Firewall Configuration Settings ................................................ 25 Firewall Configuring a Virtual Server (Port Forwarding) ........................................ 25 Firewall Configuring DMZ for Gaming or Conferencing Applications.......................... 26 Utilities Viewing Network System Information.................................................... 27 Utilities Restarting the Wireless Router ........................................................... 27 Utilities Reverting to Factory Default Settings ................................................... 28 Utilities Viewing the System Logs ................................................................... 28 Utilities DDNS ........................................................................................... 28 Chapter 7. Wireless Router Configuration Screen Descriptions.........................29 Basic Setup ................................................................................................ 29 Basic Wireless Settings........................................................................... 29 WPS Settings ....................................................................................... 30 WAN Setup ................................................................................................ 31 Dynamic ............................................................................................ 31 Static................................................................................................ 32 DNS32 Dynamic (IPV6) .................................................................................... 33 Static (IPV6)........................................................................................ 34 LAN Setup ................................................................................................. 35 LAN Settings ....................................................................................... 35 LAN Settings (IPV6) ............................................................................... 37 Client List .......................................................................................... 38 Wireless.................................................................................................... 39 Basic Setup ......................................................................................... 39 Guest Access ....................................................................................... 41 Advanced ........................................................................................... 42 StreamBoost .............................................................................................. 43 StreamBoost Settings............................................................................. 43 Priorities............................................................................................ 44 STAT: Downloads.................................................................................. 45 STAT: Up Time..................................................................................... 46 Firewall .................................................................................................... 46 Firewall Settings .................................................................................. 46 Virtual Servers..................................................................................... 47 DMZ.................................................................................................. 48 WAN Ping Blocking ................................................................................ 49 Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 4 Remote Management ............................................................................. 49 ALG50 Utilities .................................................................................................... 51 System Information ............................................................................... 51 Restart Router ..................................................................................... 52 Factory Default.................................................................................... 53 Firmware Upgrade ................................................................................ 53 System Settings.................................................................................... 54 System Log ......................................................................................... 55 DDNS................................................................................................. 55 Troubleshooting ....................................................................57 The Wireless Router is plugged in, but the Power light is Off ................................... 57 I'm not getting on the Internet (all connections) .................................................. 57 I'm not getting on the Internet (Ethernet) .......................................................... 57 I'm not getting on the Internet (Wireless) ........................................................... 57 My wireless Internet connection stops working sometimes ...................................... 58 I can get on the Internet, but everything is slow .................................................. 58 ARRIS Contacts......................................................................59 Before You Call ARRIS Support......................................................................... 59 By Telephone ............................................................................................. 59 By Email ................................................................................................... 62 Ask ARRIS Customer Portal ............................................................................. 63 Global Knowledge Services and Training ............................................................ 63 Chapter 8. Chapter 9. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 5 Chapter 1 Overview Introduction Get ready to experience the Internets express lane! Whether youre checking out streaming media, downloading new software, or checking your email, the Touchstone TR3300-AC 802.11ac Wireless Router brings it all to you faster and more reliably. The Touchstone TR3300-AC 802.11ac Wireless Router provides four Ethernet connections for use as the hub of your home/office Local Area Network (LAN). The TR3300-AC also provides 802.11a/b/g/n/ac wireless connectivity for enhanced mobility and versatility. Installation is simple and your service provider will provide assistance to you for any special requirements. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 6 Chapter 2 Safety Requirements The ARRIS TR3300-AC Wireless Router complies with the applicable requirements for performance, construction, labeling, and information when used as outlined below:
Do not use product near water (i.e. wet basement, bathtub, sink or near a swimming pool, etc.), to avoid risk of electrocution. The product shall be cleaned using only a damp, lint-free, cloth. No solvents or cleaning agents shall be used. Do not use spray cleaners or aerosols on the Wireless Router. Avoid using and/or connecting the equipment during an electrical storm, to avoid risk of electrocution. Do not locate the equipment within 6 feet (1.9 m) of a flame or ignition source (i.e. heat registers, space heaters, fireplaces, etc.). Use only power supply and power cord included with the equipment. Equipment should be installed near the power outlet and should be easily accessible. In areas of high surge events or poor grounding situations and areas prone to lightning strikes, additional surge protection may be required (i.e. PF11VNT3 from American Power Conversion) on the AC and Ethernet lines. When the Wireless Router is connected to a local computer through Ethernet cables, the computer must be properly grounded to the building/residence AC ground network. All plug-in cards within the computer must be properly installed and grounded to the computer frame per the manufacturers specifications. Ensure proper ventilation. Position the Wireless Router so that air flows freely around it and the ventilation holes on the unit are not blocked. Do not mount the Wireless Router on surfaces that are sensitive to heat and/or which may be damaged by the heat generated by the modem, its power supply, or other accessories. FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 7 Chapter 2: Safety Requirements Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. WARNING Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 7.9 inches (20cm) between the radiator and your body. This transmitter must not be co-
located or operating in conjunction with any other antenna or transmitter. Industry Canada Compliance This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) lappareil ne doit pas produire de brouillage;
(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'valuation dans la section 2.5 de RSS 102 et la conformit a l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformit de rf. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Cet metteur ne doit pas tre Co-plac ou ne fonctionnant en mme temps qu'aucune autre antenne ou metteur. Cet quipement devrait tre install et actionn avec une distance minimum de 20 centimtres entre le radiateur et votre corps. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 8 Chapter 2: Safety Requirements The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. For Mexico The operation of this equipment is subject to the following two conditions: (1) This equipment or device cannot cause harmful interference and (2) this equipment or device must accept any interference, including interference that may cause some unwanted operation of the equipment. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 9 Chapter 3 Product Overview About The Wireless Router The TR3300-AC Wireless Router is a 3x3 dual-band 802.11ac router for MSOs, allowing users to connect to the Internet through a separate modem. The TR3300-AC Wireless Router has the following features:
Remote management capability: allows you to make changes to the Wireless Router's configuration from anywhere on the Internet Smart stream management: StreamBoostTM technology automatically gives applications and devices the bandwidth they need for the best online experience Convenience: supports Ethernet and 802.11a/b/g/n/ac wireless connections; both wired and wireless connections can be used simultaneously Four Ethernet ports for connections to non-wireless devices A USB 2.0 host port (future support for external USB devices) What's in the Box?
Make sure you have the following items before proceeding. Call your service provider for assistance if anything is missing. Wireless Router Power Adapter Wireless Installation Guide Ethernet Cable End User License Agreement Items You Need Make sure you have the following items on hand before continuing:
Wireless Router package: see What's in the Box? (page 10) for a list of items in the package. Ethernet Cable: In addition to the Ethernet cable provided, you may need an additional Ethernet cable if you want to connect to wired clients. This is a standard Ethernet cable with RJ45 type connectors on both ends. You can buy Ethernet cables from any electronics retailer and many discount stores. Information packet: your service provider should furnish you with a packet containing information about your service and how to set it up. Read this information carefully and contact your service provider if you have any questions. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 10 Chapter 3: Product Overview System Requirements The Touchstone Wireless Router operates with most computers. The following describes requirements for each operating system; see the documentation for your system for details on enabling and configuring networking. To use the Wireless Router, you need high-speed Internet service from your service provider. Recommended Hardware The following hardware configuration is recommended. Computers not meeting this configuration can still work with the TR3300-AC, but may not be able to make maximum use of TR3300-AC throughput. CPU: P4, 3GHz or faster RAM: 1GB or greater Ethernet: Gig-E (1000BaseT) Wi-Fi: 802.11a, b, g, n, or ac compliant Wi-Fi equipment Windows MacOS Windows XP , Windows Vista, Windows 7, or Windows 8. A supported Ethernet or wireless LAN connection must be available. System 7.5 to MacOS 9.2 (Open Transport recommended) or MacOS X. A supported Ethernet or wireless LAN connection must be available. Linux/other Unix Hardware drivers, TCP/IP, and DHCP must be enabled in the kernel. A supported Ethernet or wireless LAN connection must be available. About this Manual This manual covers the Touchstone TR3300-AC Wireless Router. The model number is on the label affixed to the bottom of the Wireless Router. 1. Model number Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 11 Chapter 3: Product Overview 2. WLAN-24 MAC address 3. PreShared Key 4. WPS PIN What About Security?
Having a high-speed, always-on connection to the Internet requires a certain amount of responsibility to other Internet usersincluding the need to maintain a reasonably secure system. While no system is 100% secure, you can use the following tips to enhance the systems security:
Keep the operating system of the computer updated with the latest security patches. Run the system update utility at least weekly. Keep the email program updated with the latest security patches. In addition, avoid opening email containing attachments, or opening files sent through chat rooms, whenever possible. Install a virus checker and keep it updated. Avoid providing web or file-sharing services over the Wireless Router. Besides certain vulnerability problems, most service providers prohibit running servers on consumer-
level accounts and may suspend your account for violating the terms of service. Use the service provider's mail servers for sending email. Avoid using proxy software unless you are certain that it is not open for abuse by other Internet users (some are shipped open by default). Criminals can take advantage of open proxies to hide their identity when breaking into other computers or sending spam. If you have an open proxy, your service provider may suspend your account to protect the rest of the network. The TR3300-AC ships with wireless LAN security set by default (for the same reasons that you should run only secured proxies). See the security label on the product for the factory security settings. If you need to modify the default wireless security settings, see Configuring the Wireless Connection (page 18). Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 12 Chapter 4 Installing the Wireless Router Before you start, make sure that:
You have all the Items You Need (page 10):
The modem and power outlets are available nearby. Front Panel The front of the Wireless Router has the following indicators:
1. Power: indicates whether AC power is available to the unit. 2. WAN: indicates the status of Internet service connectivity. 3. 2.4G: indicates the status of the 2.4 GHz wireless LAN. 4. 5G: indicates the status of the 5 GHz wireless LAN. 5. LAN (1 - 4): indicates the status of LAN connectivity on each of the wired ports. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 13 6. USB: indicates whether a USB device is attached. 7. WPS: indicates Wireless Protected Setup (WPS) is active. Indicator Lights for the TR3300-AC Chapter 4: Installing the Wireless Router The Wireless Router has several LED indicator lights to assist in troubleshooting. LED Color/Behavior Description Power WAN Solid green Solid green Flashing green Off System power is on. An IP address has been received and is ready to transmit data, or bridge mode is active. The Ethernet cable connection has been detected. No Ethernet cable is connected to the Wireless Router. 2.4G Wi-Fi Solid green The wireless port has linked with a wireless client. Off Wireless is disabled. 5G Wi-Fi Solid green The wireless port has linked with a wireless client. Off Wireless is disabled. WPS Solid green WPS has been started. Flashing green (slow flash) Flashing green (quick flash) Solid green LAN 1 4 WPS has been started, and Wireless Router is ready to accept a client connection. WPS error. 10/100/1000Mbps link detected. Flashing green Receiving/transmitting data at 10/100/1000Mbps. Off No Ethernet connection. USB Solid green USB device successfully connected and active. Flashing green USB device read/write activity. Off No USB device connected, or the attached USB device can now be safely removed. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 14 Rear Panel The rear of the Wireless Router has the following connectors and controls:
Chapter 4: Installing the Wireless Router 1. Reset button: resets the Wireless Router as if you power cycled the unit. Use a pointed non-metallic object to press this button. Note: If you hold the Reset button for more than five seconds, the Wireless Router will be reset to the factory default settings and will reboot. 2. WPS Button: begins associating the Wireless Router with a wireless device. 3. USB: USB host connector - future support for external USB devices. 4. Ethernet (1 - 4): connectors for use with a computer LAN port. 5. WAN: connector for the modem. 6. Power: connector for the power cord. Selecting an Installation Location There are a number of factors to consider when choosing a location to install the Wireless Router:
Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 15 Chapter 4: Installing the Wireless Router Is an AC outlet available nearby? For best results, the outlet should not be switched and should be close enough to the Wireless Router that extension cords are not required. Is the modem nearby? Can you easily run cables between the Wireless Routers location and the modem?
If you are connecting devices to the Ethernet ports, can you easily run cables between the Wireless Routers location and those devices?
If you want to install the Wireless Router on a desktop, is there enough space on either side to keep the vents clear? Blocking the vents may cause overheating. How close are the wireless devices? In general, the Wireless Router should be located close to the center of the user sphere. The Wireless Router wireless connection range is typically 100200 feet (30m65m) for 2.4 GHz signals and less for 5 GHz signals. A number of factors can affect connection range, as described below. Desktop Mounting Instructions Position the Wireless Router so that:
air flows freely around it the back faces the nearest wall it will not fall to the floor if bumped or moved the sides of the unit are not blocked. Note: Clean the Wireless Router using only a clean, slightly moistened, cloth. Do not use aerosols in the vicinity of the Wireless Router. Factors Affecting Wireless Range A number of factors can affect the usable range for wireless connections. Increases range Decreases range Locating the unit centrally Creating as much "line-of-sight" as possible with client devices Metal or concrete walls between the Wireless Router and other devices Large metal appliances, aquariums, or metal cabinets between the Wireless Router and other devices Interference and RF noise (2.4 GHz wireless phones, microwave ovens, wireless speaker/receiver systems, or other wireless networks) Placing the device in a cabinet or other enclosed space Note: Decreasing the range of the wireless network may be beneficial, as long as the decreased range is sufficient for your needs. By limiting the networks range, you reduce interference with other networks and make it harder for unwanted users to find and connect to the network. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 16 Chapter 4: Installing the Wireless Router Note: Setting the transmit power level to High increases the range. Setting it to Medium or Low decreases the range proportionately. Medium or Low may be more appropriate for high-
density residential locations. Ethernet or Wireless?
There are two ways to connect the computer (or other equipment) to the Wireless Router. The following will help you decide which is best for you:
Ethernet Ethernet is a standard method of connecting two or more computers into a Local Area Network (LAN). You can use the Ethernet connection if the computer has built-in Ethernet hardware. The TR3300-AC provides support for up to four such connected devices. Note: To connect more than four computers to the TR3300-AC through the Ethernet ports, you need an Ethernet switch (available at computer retailers). The Wireless Router package comes with one 4-foot (1.2m) Ethernet cable (the connectors look like wide telephone connectors); you can purchase more cables if necessary at a computer retailer. If you are connecting the Wireless Router directly to a computer, or to an Ethernet switch with a cross-over switch, ask for Category 5e (CAT5e) straight-through cable. CAT5e cable is required for gigabit Ethernet (Gig-E), not regular CAT5 cable. Wireless Wireless access lets you connect additional (wireless-capable) devices to the Wireless Router. The 802.11 wireless LAN standard allows one or more computers to access the TR3300-AC using a wireless (radio) signal. These connections are in addition to the connections supported via Ethernet. Note: You can use the wireless connection if the computer has a built-in or aftermarket plug-in wireless adapter. To learn more about which wireless hardware works best with the computer, see your computer dealer. Both If you have two or more computers, you can use Ethernet for up to four devices and wireless for the others. To connect five or more computers to the Ethernet ports, you will need an Ethernet switch (available at computer retailers.) Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 17 Connecting the Wireless Router 1. Unplug the power to turn off the modem. Chapter 4: Installing the Wireless Router 2. Connect one end of the Ethernet cable (included) to the modem, and the other end to the WAN port on the Wireless Router. 3. Reconnect the plug on the modem to turn the modem back on. Wait approximately 2 minutes to allow the modem to fully power up. 4. Connect the power adapter (included) to the power connector on the back of the Wireless Router, and then connect the power adapter to an available AC outlet. Wait until the 2.4G and 5G LEDs on the front panel of the Wireless Router turn solid green. 5. To manage the setup of the Wireless Router, you can use a second Ethernet cable (not provided) to connect a computer to an available LAN port on the TR3300-AC, or you can connect wirelessly by using the preset wireless security settings printed on the security label located on the bottom of the Wireless Router. 6. Open a browser on the computer to access the management interface of the Wireless Router. If the webpage does not display correctly, try another browser. See Accessing the Configuration Interface (page 19) for more information. Note: In some cases, the service provider may redirect the browser to their welcome page so that you can establish new service. This step may be required before you can manage the TR3300-
AC configuration settings. Configuring the Wireless Connection The TR3300-AC ships with a secure SSID that is unique for every device. Wi-Fi network information is located on the label on the bottom of the Wireless Router. You should configure the Wireless Router's wireless settings. Note: At a minimum, you should set a login password and set up wireless security. Refer to Configuring the Wireless Network (page 20) for complete instructions on configuring the wireless connection. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 18 Chapter 5 Basic Configuration The Wireless Router ships with a basic factory default configuration that should allow you to immediately access the Internet after installing the hardware according to the Users Guide. If you need to modify the Wireless Router's default basic settings, or if you want to configure advanced settings, refer to the appropriate instructions in this document. As a minimum, it is recommended that you:
Change the default login password Change the default wireless network name, also called the Service Set Identifier (SSID) Wireless LAN Default Security Setting: The Wireless Router ships with wireless LAN security set by default. See the security label on the product for the factory security settings: network name (SSID), encryption method, network key, and WPS PIN. If you need to modify the Wireless Routers default wireless security settings, or if you want to configure any other settings, refer to the appropriate instructions in this document. Note: You must set up the computer and other client devices to work with the security settings on the Wireless Router. Refer to the documentation for the client device for instructions on setting security. If the computer or client device supports Wi-Fi Alliance WPS (Wireless Protected Setup), activate WPS on the computer or client device and the Wireless Router simultaneously to easily set up the system security. Accessing the Configuration Interface Perform the following steps to access the configuration interface. 1. If security has been properly set up on the computer to access the wireless LAN on the Wireless Router, use the connection utility for the operating system to connect to the wireless LAN using its network name (SSID), as shown on the security label. Note: If you cannot access the wireless LAN, you must first establish a wired Ethernet connection between the computer and the Wireless Router. 2. In the web browser, open the page http://192.168.1.1/ to access the Wireless Router setup. The Login screen displays. 3. Enter the user name and password and click Apply to log in. Note: The default user name is "admin". The default password is "password", in lower case letters. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 19 Chapter 5: Basic Configuration The Basic Wireless Settings screen displays. 4. Set basic setup configuration parameters as required for the system. Note: Most configuration parameters that you may want to set can be accessed on the Basic Wireless Settings screen or on the LAN Setup or Wireless tabs. Configuring the Wireless Network Perform the following procedures to make the basic configuration settings for the wireless network. Enabling or Disabling the Wireless Network. Perform the following steps to enable the wireless network. 1. Access and log into the configuration interface. 2. Click the Basic Setup tab. 3. Click the Enable Wireless checkbox in either the Wireless 2.4 GHz section or the Wireless 5 GHz section to enable wireless networking for that frequency. 4. Click Apply. Changing the Login Password You should change the login password to something other than the default password. Note: The default user name is "admin," the default password is "password" (both lower case). Perform the following steps to change the password. 1. Access and log into the configuration interface via a direct wired Ethernet or wireless connection. 2. Click the Utilities tab. 3. Click System Settings in the side menu. 4. Enter the old password in the Current Password field. 5. Enter the new password in both the New Password and Confirm New Password fields. Note: Passwords are case-sensitive. Valid characters are the numbers 0 to 9, the letters a through z and A through Z, and printable special characters (such as $, !, ?, &, #, @, and others.) 6. Click Apply. 7. Record the new passwords here:
2.4 GHz Password: ___________________________________ Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 20 Chapter 5: Basic Configuration 5 GHz Password: _____________________________________ Changing the Default Wireless Network Name (SSID) Perform the following steps to change the wireless 2.4 GHz and/or wireless 5 GHz network name. 1. Access and log into the configuration interface. 2. Click the Basic Setup tab. 3. Enter a unique user friendly name to identify the wireless network in the Wireless Network Name (SSID) field under either Wireless 2.4 GHz or Wireless 5 GHz. Note: This name is also referred to as the Service Set Identifier (SSID). The name can be up to 32 characters long. Do not duplicate any other SSID names that may be operating in the area. 4. Click Apply at the bottom of the screen. 5. Record the new network names here:
2.4 GHz Network name (SSID): ______________________________ 5 GHz Network name (SSID): ________________________________ Configuring Wi-Fi Protected Setup (WPS) WPS is a standard method for easily configuring a secure connection between the Wireless Router and computers or other wireless devices (known as enrollees) that support WPS. When WPS is enabled you can attach other wireless devices by pressing the WPS buttons on the device (if equipped) and on the Wireless Router, or by entering the enrollees PIN and then clicking the Start WPS Association icon. Perform the following steps to enable the wireless network. 1. Access and log into the configuration interface. 2. Click the Basic Setup tab. 3. Click WPS Settings in the side menu. 4. Click the Wi-Fi Protected Setup (WPS) Enable checkbox and click Apply to enable WPS on the system. 5. a) If the client device has a WPS button, press the WPS buttons on the client device and on the Wireless Router simultaneously to start the WPS association. b) If the client device has a PIN number, enter the enrollees PIN in the Enrollee PIN Code field, and then click the Start WPS Association icon. Enter the Wireless Routers PIN code in the Device PIN Code field if requested during connection. 6. If the connection is successful, the WPS indicator light on the Wireless Router stops flashing and remains lit. If unsuccessful, the WPS light continues to flash for up to two minutes (indicating that its ready to accept a client connection) and then turns off. If the WPS light turns off, start the association process over. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 21 Setting Up the WAN Connection A Dynamic or DHCP (Dynamic Host Configuration Protocol) connection is the most commonly used WAN connection type. Chapter 5: Basic Configuration Note: Do not change this setting unless your Internet Service Provider tells you to use another connection type. Perform the following steps to change the connection type. 1. Access and log into the configuration interface. 2. Click the WAN Setup tab. 3. Click Dynamic, Static, Dynamic (IPV6),or Static (IPV6) in the side menu to display the appropriate screen for configuring that type of WAN connection. 4. Set the required configuration parameters for the connection type you selected as provided by your service provider. Note: Refer to WAN Setup in Wireless Router Configuration Screen Descriptions (page 29) for specific instructions on setting the various connection type configuration parameters. 5. Click Apply at the bottom of the screen. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 22 Chapter 6 Advanced Configuration Options This section explains how to use the most common advanced configuration options for the Wireless Router in the following areas:
LAN Setup Wireless Setup Firewall Utilities Note: Refer to Wireless Router Configuration Screen Descriptions (page 29) for additional advanced configuration options. LAN Setup Configuring DHCP DHCP (Dynamic Host Protocol Configuration) is enabled by default on the Wireless Router which allows the Wireless Router to act as a DHCP server and automatically assign an IP address to each device on the network. DHCP is a set of rules used by devices such as a computer, Wireless Router, or network adapter to allow the device to request and obtain an IP address from a server which maintains a list of addresses available for use. The DHCP server ensures that all IP addresses are unique, e.g., no IP address is assigned to a second device while the first device's assignment is valid (its lease has not expired). Without DHCP, the IP addresses must be entered manually at each computer or device and a new IP address must be entered each time it moves to a new location on the network. Perform the following steps to configure DHCP. 1. Access and log into the configuration interface. 2. Click the LAN Setup tab. 3. Click LAN Settings or LAN Settings (IPV6) in the side menu to display the LAN Settings screen. 4. Click the Enable DHCP Server or Enable DHCP Server (IPV6) checkbox under DHCP Server Settings. 5. Enter the Start IP Address and End IP Address for the range of IP addresses that the DHCP Server will be allowed to assign to a network device. 6. Enter the Lease Time in seconds before the assigned IP address will expire. (After the lease time is up, the user is automatically assigned a new dynamic IP address.) Note: Refer to LAN Setup (page 35) for specific instructions on setting the various DHCP configuration parameters. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 23 Chapter 6: Advanced Configuration Options 7. Click Apply at the bottom of the screen. LAN Setup Adding and Deleting DHCP Clients The Client List screen shows the host name, IP address, and MAC address of each computer that is connected to the network. If a computer does not have a specified host name, then the host name field will be blank. Perform the following steps to configure the DHCP Clients. 1. Access and log into the configuration interface. 2. Click the LAN Setup tab. 3. Click Client List in the side menu to display the Client List screen. 4. Click Add to add a reserved IP client. Select an existing DHCP client and then click Delete to delete the client. Click Refresh to update the Clients List. LAN Setup Selecting the NAT Mode NAT (Network Address Translation) allows the Wireless Router to manipulate IP addresses so that just one single IP address can represent an entire group of computers on the network and let them all communicate with the Internet. This conserves IP addresses and is necessary since there are a limited number of available IP addresses for use. Perform the following steps to select the NAT Mode. 1. Access and log into the configuration interface. 2. Click the LAN Setup tab. 3. Click LAN Settings in the side menu to display the LAN Settings screen. 4. Select the NAT Mode from the NAT Mode field drop-down list. The optional modes are:
Bridged - Data will pass through the device directly without any routing. Routed with NAT - Data will be routed by the device and all the outgoing packets will be NATed. Routed without NAT - Data will be routed by the device but all the outgoing packets will not be NATed. 5. Click Apply at the bottom of the screen. Note: A dialog box prompts you to restart the Wireless Router. Click OK to restart. Wireless Setup Setting the Wireless Mode You can set the wireless mode to optimize performance based on the type of network adapters being used by the network devices, e.g., 802.11b, 820.11g, and 802.11n. Select the proper mode to support all of the wireless devices that will connect to the Wireless Router. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 24 Chapter 6: Advanced Configuration Options Perform the following steps to set the wireless mode. 1. Access and log into the configuration interface. 2. Click the Wireless tab. 3. Click Basic Setup in the side menu to display the Advanced Settings screen. 4. Under Wireless 2.4 GHz or Wireless 5 GHz, select the proper mode from the Wireless Mode drop-down list. 2.4 GHz Options: B only, G only, B/G mixed, and G/N mixed. 5 GHz Options: A only, A/N mixed, and A/N/AC mixed. 5. Click Apply at the bottom of the screen. Note: Refer to Advanced (page 42) for instructions on setting additional advanced wireless configuration parameters. Note: If you have both A and B running in your network, then throughput on the entire wireless network will be reduced. Firewall General Firewall Configuration Settings The Wireless Router is equipped with a firewall that will protect the network from a wide array of common Denial of Service (DoS) attacks, including Ping of Death (PoD) attacks. You can disable the firewall function if needed. Turning off the firewall protection will not leave the network completely vulnerable to hacker attacks, but it is recommended that you enable the firewall whenever possible. Perform the following steps to enable the firewall and make general firewall settings. 1. Access and log into the configuration interface. 2. Click the Firewall tab. 3. Click Firewall Settings in the side menu to display the Firewall Settings screen. 4. Check the Enable Firewall checkbox to enable the firewall on the network. 5. Click Apply at the bottom of the screen. 6. Click WAN Ping Blocking in the side menu to display the WAN Ping Blocking screen. 7. Check the Block ICMP Ping Enable checkbox to protect against PoD attacks. 8. Click Apply at the bottom of the screen. Firewall Configuring a Virtual Server (Port Forwarding) The port forwarding function forwards inbound traffic from the Internet to a specified single device on the network. Examples include allowing access to a web server on the Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 25 Chapter 6: Advanced Configuration Options network, peer-to-peer file sharing, applications that allow remote access to the computer, some gaming and videoconferencing applications, and others. If you have a server in the network that you want to make available to the general Internet, you can configure a virtual server. The firewall passes requests from the Internet to the designated computer on the network. This function works by allowing you to route external (Internet) calls for services such as a web server (port 80), FTP server (Port 21), or other applications through the Wireless Router to the internal network. Perform the following steps to configure a virtual server. 1. Access and log into the configuration interface. 2. Click the Firewall tab. 3. Click Virtual Servers in the side menu to display the Virtual Server Configuration screen. 4. Select the type of server that you want to add from the Service List drop-down box. 5. Click Add to add that virtual server. 6. If necessary, adjust the following parameters for the server that you are adding. Enable Enable this virtual server Description Enter a name for the virtual server. Inbound Port Enter the inbound port range for the virtual server. It should be the same range as the local port. Type Sets the format for the port. Options are TCP, UDP, or BOTH. Private IP Address Enter the IP address of the machine on the LAN that you want the connections to go to. Private Port Enter the private port range for the virtual server. It should be the same range as the inbound port. 7. Click Apply to save your settings. Note: To delete a virtual server, first select a virtual server in the list and then click Delete. Firewall Configuring DMZ for Gaming or Conferencing Applications The DMZ feature allows you to specify one computer on the network to be placed outside of the NAT firewall. This may be necessary if the NAT feature is causing problems with an application such as a game or video conferencing application. Use this feature only on a temporary basis. The computer in the DMZ is not protected from hacker attacks. Perform the following steps to put a computer in the DMZ. 1. Access and log into the configuration interface. 2. Click the Firewall tab. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 26 Chapter 6: Advanced Configuration Options 3. Click DMZ in the side menu to display the DMZ Settings screen. 4. Enter the following parameters. Enable Click this checkbox to enable DMZ on the network. Static IP Displays the static IP address. Private IP Enter the IP address of the computer to be placed in the DMZ. Be sure that the address is not in the range of addresses delivered by the DHCP server if enabled. After placing the computer in the DMZ, all ports on the computer are open to the Internet and not protected. 5. Click Apply at the bottom of the screen. Note: To remove the computer from the DMZ, delete the entries and uncheck the Enable DMZ checkbox. Utilities Viewing Network System Information You can view status and system information for the network on the System Information screen. Perform the following steps to view system status information. 1. Access and log into the configuration interface. 2. Click the Utilities tab. 3. Click System Information in the side menu to display the System Information screen. Note: Refer to System Information (page 51) for an explanation of the various status information parameters. Utilities Restarting the Wireless Router It may be necessary to restart (reboot) the Wireless Router if it begins working improperly. Restarting the Wireless Router will not delete any of the configuration settings. Perform the following steps to restart the Wireless Router. 1. Access and log into the configuration interface. 2. Click the Utilities tab. 3. Click Restart Router in the side menu to display the Restart Router screen. 4. Click the Restart Router button to restart the Wireless Router. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 27 Chapter 6: Advanced Configuration Options Utilities Reverting to Factory Default Settings This function restores all of the Wireless Routers configuration settings to the factory default setting. Perform the following steps to revert to factory default settings. 1. Access and log into the configuration interface. 2. Click the Utilities tab. 3. Click Factory Default in the side menu to display the Factory Defaults screen. 4. Click the Factory Defaults button to reset the Wireless Router to factory default settings. Utilities Viewing the System Logs The System Logs screen displays the system logs. Perform the following steps to configure the system logs. 1. Access and log into the configuration interface. 2. Click the Utilities tab. 3. Click System Log in the side menu to display the System Logs. When viewing the logs, click Refresh to update the list. Utilities DDNS DDNS (Dynamic DNS) allows you to provide Internet users with a fixed domain name
(instead of an IP address which may periodically change). This allows various locations on the Internet to access the gateway and the applications that are set up in the gateway's virtual servers without knowing your current IP address. Requirements In order to use DDNS you must first create an account with a DDNS provider. The DDNS provider maps your chosen domain name to your IP address. Once the account is established, perform the following steps to enable DDNS. 1. Access and log into the configuration interface. 2. Click the Utilities tab. 3. Click DDNS in the side menu to display the DDNS configuration screen. 4. Click the DDNS Enable checkbox. Note: Refer to DDNS (page 55) for specific instructions on setting the various DDNS configuration parameters. 5. After setting the necessary configuration parameters, click Apply at the bottom of the screen. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 28 Chapter 7 Wireless Router Configuration Screen Descriptions This section provides an overview of the ARRIS graphical user interface (GUI) Wireless Router setup screens. Each of the following tabs in the GUI and their individual sub-menus and configuration parameters are explained in detail:
Basic Setup WAN Setup LAN Setup Wireless StreamBoost Firewall Utilities Basic Setup Basic Wireless Settings While the system has many configuration options, the options on this Basic Setup page are those required by most users. Click the tabs to access the other configuration pages to set advanced options. Hover the mouse pointer over the question mark icon next to an option to view a description of that option. For changes to take effect, you must click Apply. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 29 Chapter 7: Wireless Router Configuration Screen Descriptions Wireless 2.4 GHz/Wireless 5 GHz:
Enable Wireless Click this checkbox to enable the wireless network on the system. Wireless Network Name (SSID) Enter a user friendly name to identify the wireless network. This name is also referred to as the Service Set Identifier (SSID). The name can be up to 32 characters long. Password Sets the Wi-Fi password. Use a password that will not be easy to guess. Passwords are case-sensitive. Valid characters are the numbers 0 to 9, the letters a through z and A through Z, and printable special characters (such as $, !, ?, &, #, @, and others). You must click Apply to save the new password. Note: You must be logged into the configuration interface via a direct wired Ethernet connection to change the password. WPS Settings Wi-Fi Protected Setup (WPS) is the industry standard method to simplify the security setup and management of Wi-Fi networks. You can now easily set up and connect to a WPA-enabled 802.11 network with WPS-certified devices using either a Personal Information Number (PIN) or the Push Button Configuration (PBC) method. Legacy devices without WPS can be added to the network using the traditional manual configuration method. WPS Enable/Disable:
Wireless 2.4 GHz/Wireless 5 GHz Click the frequency for which you want to enable WPS. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 30 Chapter 7: Wireless Router Configuration Screen Descriptions WPS Enable Click this checkbox to enable WPS on the system. WPS is a standard method for easily configuring a secure connection between the Wireless Router and computers or other wireless devices (known as enrollees) that support WPS. When WPS is enabled, you can attach other wireless devices by pressing the WPS buttons on the device
(if equipped) and on the Wireless Router, or by entering the enrollees PIN and then clicking the Start WPS Association icon. PIN Method:
Enrollee PIN Code If the client device has a WPS PIN number, enter it here, then click Enroll. Device PIN Code Enter this code on the computer if requested during connection. PBC Method:
Start PBC Click to start the PBC connection process. WAN Setup Dynamic A dynamic connection type is the most common type of connection. The Wireless Router gets its IP address from a DHCP server at the service provider. If you are not sure of the connection type, use this type. For changes to take effect, you must click Apply. DHCP:
Enable DHCP Click this checkbox to enable a DHCP connection for the system. Host name This field displays the host name of the Wireless Router. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 31 Chapter 7: Wireless Router Configuration Screen Descriptions A static IP address connection type is less common than others and uses a permanent IP address to connect to the Internet. If your service provider gives you an IP address that never changes, then use this option. For changes to take effect, you must click Apply. Static IP Settings:
Enable Static IP Click this checkbox to enable a static IP address connection for the system. IP Address Enter the IP address assigned by your service provider or static IP operation. Subnet Mask Enter the subnet mask assigned for the device by your service provider or static IP operation. Gateway Address Enter the gateway address assigned for the device by your service provider or static IP operation. Click here to enter your DNS Settings If your service provider gave you specific DNS settings, click here to go to the DNS Settings screen to enter those settings. Static DNS If your service provider gave you specific DNS settings, use this screen to enter them. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 32 Chapter 7: Wireless Router Configuration Screen Descriptions DNS Settings Automatic from ISP Click this checkbox if the Wireless Router should automatically get its DNS settings from your service provider. Primary DNS Server IP Enter the IP address of the primary DNS server. Secondary DNS Server IP Enter the IP address of the secondary DNS server. Dynamic (IPV6) This screen enables a DHCPv6 configured IPV6 stack. A dynamic connection type is the most common type of connection. The Wireless Router gets its IP address from a DHCP server at your service provider. If you are not sure of the connection type, use this type. For changes to take effect, you must click Apply. Dynamic Configuration (IPV6):
Enable DHCP (IPV6) Click this checkbox to enable a DHCP (IPV6) connection for the system. IP Address V6 This field displays the IPV6 address automatically assigned by the service provider. An IPV6 address has eight groups of four hexadecimal digits (0-9, a-f). The groups are separated by colons (:) e.g. 2001:0db8:85a3:0000:0000:8a2e:0370:7334. A double colon (::) is shorthand for an address of all zeros. Delegated Prefix This field displays the assigned IPV6 prefix to be used by addresses allocated in the local network. Delegated Prefix Length This field displays the assigned IPV6 prefix length. IPV6 Gateway Address This field displays the gateway address. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 33 Static (IPV6) Chapter 7: Wireless Router Configuration Screen Descriptions This screen enables a statically configured IPV6 stack. A static IP address connection type is less common than others and uses a permanent IP address to connect to the Internet. If your service provider gives you an IP address that never changes, then use this option. For changes to take effect, you must click Apply. Static IP Settings (IPV6):
Enable Static IPV6 - Click this checkbox to enable a static IPV6 address connection for the system. IP Address V6 Enter the IPV6 address assigned by your service provider or static IP operation. An IPV6 address has eight groups of four hexadecimal digits (0-9, a-f). The groups are separated by colons (:) e.g. 2001:0db8:85a3:0000:0000:8a2e:0370:7334. A double colon (::) is shorthand for an address of all zeros. Prefix Length (IPV6) The length of the network portion of this address. IPV6 Gateway Address Enter the gateway address assigned for the device by your service provider or static IP operation. Primary DNS Server (IPV6) Enter the IPV6 address of the primary DNS server. Your service provider will provide this information. Secondary DNS Server (IPV6) Enter the IPV6 address of the secondary DNS server. Your service provider will provide this information. Domain Name The entry here will be displayed as the domain name on the client devices. It can be specified by your service provider or by you. Delegated Prefix The network portion of the IPV6 addresses to be allocated to local clients. Delegated Prefix Length The length of the network portion of the IPV6 addresses to be allocated to local clients. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 34 Chapter 7: Wireless Router Configuration Screen Descriptions LAN Setup LAN Settings You can make changes to the Local Area Network (LAN) configuration here. For changes to take effect, you must click Apply. Note: You can optionally set up the system so that there is more than one LAN in the network. This is most useful for commercial applications, not home use. All of the "LAN Setup" and
"Wireless Setup" configuration parameters can be set independently for each individual LAN. LAN IP Settings:
IP Address This field displays the IP address of the LAN. Subnet Mask This field displays the subnet mask of the LAN. DHCP Server Settings:
Enable DHCP Server Click this checkbox to enable the use of a Dynamic Host Configuration Protocol (DHCP) Server on the network. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 35 Chapter 7: Wireless Router Configuration Screen Descriptions DHCP is a set of rules used by devices such as a computer, router, or network adapter to allow the device to request and obtain an IP address from a server which maintains a list of addresses available for use. The DHCP server ensures that all IP addresses are unique, e.g., no IP address is assigned to a second device while the first device's assignment is valid (its lease has not expired). Without DHCP, the IP addresses must be entered manually at each computer in an organization, and a new IP address must be entered each time a computer moves to a new location on the network. Start IP Address/End IP Address Enter the range of IP addresses that the DHCP Server will be allowed to assign to a network device. Lease Time Enter the lease time in seconds before the assigned IP address will expire.
(After the lease time is up, the user is automatically assigned a new dynamic IP address.) A "lease" is the amount of time that a given IP address will be valid for a computer or other network device. The lease time can vary depending on how long a user is likely to require the Internet connection at a particular location. Using very short leases, DHCP can dynamically reconfigure networks where there are more computers than available IP addresses, such as educational environments. Domain Name This field displays the domain name. NAT:
NAT Mode Select the NAT Mode. Routed with NAT - Data will be routed by the device and all the outgoing packets will be NATed. Routed without NAT - Data will be routed by the device but all the outgoing packets will not be NATed. Bridged - Data will pass through the device directly without any routing. UPnP:
Enable UPnP Click this checkbox to enable UPnP (Universal Plug and Play) on the system. Advertisement Time To Live Enter the maximum number of hops that each UPnP packet can be sent before it is disregarded. The default value is 4, which should be acceptable for most home networks. IGMP Proxy:
Enable IGMP Proxy Click this checkbox to enable the IGMP (Internet Group Management Protocol) proxy on the system. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 36 LAN Settings (IPV6) Chapter 7: Wireless Router Configuration Screen Descriptions This screen configures LAN side support for IPV6. You can make changes to the Local Area Network (LAN) configuration here. For changes to take effect, you must click Apply. Note: You can optionally set up the system so that there is more than one LAN in the network. This is most useful for commercial applications not home use. All of the "LAN Setup" and
"Wireless Setup" configuration parameters can be set independently for each individual LAN. LAN Settings (IPV6):
IP Address (IPV6) This field displays the IPV6 address of the LAN. An IPV6 address has eight groups of four hexadecimal digits (0-9, a-f). The groups are separated by colons (:) e.g. 2001:0db8:85a3:0000:0000:8a2e:0370:7334. A double colon (::) is shorthand for an address of all zeros. Prefix Length V6 Length of the network portion of the IPV6 address. Link Local Address (IPV6) IPV6 address that can be used only on this network. DHCP Server Settings (IPV6):
Enable DHCP Server (IPV6) Click this checkbox to enable the use of a V6 Dynamic Host Configuration Protocol (DHCP) Server on the network. DHCP is a set of rules used by devices such as a computer, router, or network adapter to allow the device to request and obtain an IP address from a server which maintains a list of addresses available for use. The DHCP server ensures that all IP addresses are unique, e.g., no IP address is assigned to a second device while the first device's assignment is valid (its lease has not expired). Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 37 Chapter 7: Wireless Router Configuration Screen Descriptions Without DHCP, the IP addresses must be entered manually at each computer in an organization, and a new IP address must be entered each time a computer moves to a new location on the network. Start IP Address (IPV6)/End IP Address (IPV6) Enter the range of IPV6 addresses that the DHCP Server will be allowed to assign to a network device. Lease Time V6 Enter the lease time in seconds before the assigned IPV6 address will expire. (After the lease time is up, the user is automatically assigned a new dynamic IP address.) A "lease" is the amount of time that a given IP address will be valid for a computer or other network device. The lease time can vary depending on how long a user is likely to require the Internet connection at a particular location. Using very short leases, DHCP can dynamically reconfigure networks where there are more computers than available IP addresses, such as educational environments. DHCP Relay Settings (IPV6):
Enable DHCP Relay (IPV6) Click this checkbox to enable DHCP Relay functionality on the system. Client List This page shows the host name, IP address, and MAC address of each computer that is connected to the network. If a computer does not have a specified host name, then the host name field will be blank. Note: You can optionally set up the system so that there is more than one LAN in the network. This is most useful for commercial applications not home use. All of the "LAN Setup" and
"Wireless Setup" configuration parameters can be set independently for each individual LAN. Static Client List:
Click Add to create a new fixed client lease. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 38 Chapter 7: Wireless Router Configuration Screen Descriptions IP Address Enter the clients IP address. Name Enter a name for the client. MAC Address Enter the clients MAC address. Select a client and then click Delete to delete the client lease. Attached Client List:
Click Refresh to update the client list. Wireless Basic Setup While the system has many configuration options, the options on this Basic Setup page are those required by most users. Click the tabs to access the other configuration pages to set Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 39 Chapter 7: Wireless Router Configuration Screen Descriptions advanced options. Hover the mouse pointer over the question mark icon next to an option to view a description of that option. For changes to take effect, you must click Apply. Note: You can optionally set up the system so that there is more than one LAN in the network. This is most useful for commercial applications not home use. All of the "LAN Setup" and
"Wireless Setup" configuration parameters can be set independently for each individual LAN. Wireless 2.4 GHz/Wireless 5 GHz:
Enable Wireless Click this checkbox to enable the wireless network on the system. Channel Sets a communications channel for the Wireless Router. The default setting is
"Auto", in which the Wireless Router selects a channel with the least amount of interference to use. For 2.4 GHz, if you manually select a channel, its best to choose channel 1, 6, or 11, since these channels do not overlap. If another unit is operating in the area, choose a channel that is farthest away from the channel that unit uses. For example, if one is using channel 11, set yours to channel 1. For 5 GHz choose a channel that is farthest away from the channel used by any other unit operating in the area. If you experience interference or poor performance on a particular channel, try a different channel. Wireless Network Name (SSID) Enter a user friendly name to identify the wireless network. This name is also referred to as the Service Set Identifier (SSID). The name can be up to 32 characters long. Wireless Mode Sets the wireless mode. 2.4 GHz Options are: B/G mixed, B only, G only, and G/N mixed. 5 GHz Options are: A only, A/N mixed, and A/N/AC mixed. Select the proper mode to support all of the wireless devices that will connect to the Wireless Router.
(802.11b supports bandwidth up to 11 Mb/s. 802.11g supports bandwidth up to 54 Mb/s. 802.11n supports bandwidth up to 300 Mb/s. 802.11ac support bandwitdh up to 1.3Gb/s.) Channel Bandwidth Sets the 802.11n Channel Bandwidth. Options are 20 MHz, 40MHz, 20/40 MHz, or 80MHz (5 GHz only). The default setting is 20/40 MHz. Broadcast Network Name (SSID) Click this checkbox to allow the SSID to be broadcast by the Wireless Router. If enabled, the SSID could be obtained allowing unauthorized access to the network. If you would like others not to see the access point, uncheck the checkbox to hide the SSID. AP Isolation Click this checkbox to enable AP isolation. When enabled each of the wireless clients will be in its own virtual network and will not be able to communicate with one another. This may be useful if you have many guests using the network. Enable WMM Click this checkbox to enable Wi-Fi Multimedia (WMM) functionality. Enabling WMM can help control latency and jitter when transmitting multimedia content over a wireless connection. Disabling WMM will reduce wireless performance in 802.11n mode. This quality of service mechanism uses four access categories, which in order of priority are: voice, video, best effort, and background. This ensures that applications with low tolerance for latency and jitter are treated with higher priority than less-sensitive data applications. WMM sets different wait times for the four categories in order to provide priority network access for applications that are less tolerant of packet delays. Security Mode Sets the security mode for the Wireless Router. Can be set to WPA/WPA2-PSK (Wi-Fi Protected Access/ Wi-Fi Protected Access 2 Pre-Shared Key)
(most compatible); WPA2-PSK (Wi-Fi Protected Access 2 Pre-Shared Key) Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 40 Chapter 7: Wireless Router Configuration Screen Descriptions
(recommended); WPA2-Enterprise; or WPA/WPA2-Enterprise. 802.11n performance is only available in WPA2. Pre-Shared Key - Sets the WPA Pre-Shared Key. This text string is used to generate a unique set of encryption keys for the network. Enter a text string in this field. The key can be either ASCII (text) or Hex (hexadecimal). An ASCII text key can be from 8 to 63 characters long. Valid characters are numbers "0" through "9" and letters "a" through "z", and printable special characters (such as $, !, ?, &, #, @, and others). A hexadecimal key must be 64 characters long. Valid characters are numbers "0" through "9" and letters "a"
through "f". Guest Access Guest access allows access to the Internet through the WAN port, but it limits guests from accessing the internal network, LAN, and WLAN. The feature is supported both on 2.4 GHz and 5 GHz. Wireless 2.4 GHz/Wireless 5 GHz:
Guest SSID Enter the SSID that you would like to assign to the guest access network. You can configure up to three guest networks. Guest Access Enable Click this checkbox to enable guest access for the system. Wireless Network Name (SSID) Enter a user friendly name to identify the guest wireless network. This name is also referred to as the Service Set Identifier (SSID). The name can be up to 32 characters long. Security mode Sets the security mode for the Wireless Router. Available options are WPA/WPA2-PSK or Open. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 41 Chapter 7: Wireless Router Configuration Screen Descriptions Pre-Shared Key Sets the WPA Pre-Shared Key. This text string is used to generate a unique set of encryption keys for the network. Enter a text string in this field. The key can be either ASCII (text) or Hex (Hexadecimal). An ASCII text key can be from 8 to 63 characters long. Valid characters are numbers 0 through 9 and letters a through z as well as most other characters. A hexadecimal key must be 64 characters long. Valid characters are numbers 0 through 9 and letters a through f. Advanced The Advanced Settings page is used to set up the Wireless Routers advanced wireless functions. These settings should only be adjusted by an expert administrator since incorrect settings can reduce wireless performance. For changes to take effect, you must click Apply. Wireless 2.4 GHz/Wireless 5 GHz:
Beacon Interval Sets the time interval between beacon transmissions in milliseconds. The Wireless Router uses these transmissions to synchronize the wireless network and its client devices. For compliance with most client devices, the Beacon Interval should remain set at the default of 100ms. The allowable setting range is from 20 to 1024ms. DTIM Interval Sets the DTIM (Delivery Traffic Indication Message) Interval. The DTIM Interval informs the wireless client devices of the next available window for listening to broadcast and multicast messages. When the Wireless Router sends a DTIM beacon, the client devices hear the beacon and then listen for the messages. For compliance with most client devices, the DTIM Interval should be left at 1 ms. The allowable setting range is from 1 to 255 ms. RTS Threshold Sets the packet size limit. When the threshold is passed, the ready to send/clear to send (RTS/CTS) function is invoked. The default setting is 2347 bytes. The allowable setting range is from 1 to 2347 bytes. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 42 Chapter 7: Wireless Router Configuration Screen Descriptions Fragment Threshold Sets the fragmentation threshold. This threshold should be set to equal the maximum Ethernet frame size allowable on the link including overhead. Setting a lower threshold can damage data throughput since large frames could be fragmented and/or collisions could occur. The default setting is 2346. The allowable setting range is from 256 to 2346 bytes. Guard Interval The spacing between transmission of symbols in nanoseconds. Can be set to short or long. Select short to provide higher throughput in networks where the coverage distance is small (indoors). Select long to provide higher throughput in networks where the coverage distance is large (outdoors). StreamBoost StreamBoost Settings The StreamBoost Settings screen lets users configure the StreamBoost Quality of Service
(QoS) settings. StreamBoost is used to improve the online experience for connected clients based on the devices they use and the applications they are running. From this screen, the administrator can control and test the throughput limits in the downstream and upstream directions. StreamBoost Settings:
StreamBoost Enable Click this checkbox to enable StreamBoost technology. Auto Bandwidth Detection Click this checkbox to enable Auto Bandwidth Detection. Up Limit (Mbps) Enter the amount of bandwidth (in megabits per second) that you want to reserve for upstream (outgoing) traffic. Down limit (Mbps) Enter the amount of bandwidth (in megabits per second) that you want to reserve for downstream (incomng) traffic. Bandwidth Test Click this button to run the bandwidth test. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 43 Chapter 7: Wireless Router Configuration Screen Descriptions Keep StreamBoost Up to Date:
Enable Automatic Update Click this checkbox to enable automatic StreamBoost updates during the initial 2-year manufacturer service term. The service term will begin on the date of manufacture and run for three years or until April 1st, 2017, whichever comes first.
(After the 2-year period, the manufacturer may make further updates available via firmware updates.) StreamBoost updates may improve the Wireless Router's Internet traffic management capabilities through better traffic identification and bandwidth management techniques. In exchange, the Wireless Router will provide anonymous, performance-related information to the StreamBoost server for improved future StreamBoost service. Priorities The Priorities screen lets you set bandwidth priority at the connected device level to ensure that the most important client devices have access to the bandwidth they need to perform well. Use the Up and Down buttons to change the priority of a device in the list. Click Apply to save your settings. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 44 STAT: Downloads Chapter 7: Wireless Router Configuration Screen Descriptions The Top By Downloads screen shows how bandwidth is being used in the local network on a per-device and per-application level. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 45 STAT: Up Time Chapter 7: Wireless Router Configuration Screen Descriptions The Top 5 Flows by Time screen shows how bandwidth is being used in the local network on a per-device and per-application level. Firewall Firewall Settings The Wireless Router is equipped with a firewall that will protect the network from a wide array of common hacker attacks, including Ping of Death (PoD) and Denial of Service
(DoS) attacks. You can disable the firewall function if needed. Turning off the firewall protection will not leave the network completely vulnerable to hacker attacks, but it is Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 46 Chapter 7: Wireless Router Configuration Screen Descriptions recommended that you enable the firewall whenever possible. For changes to take effect, you must click Apply. Firewall Enable/Disable:
Enable Firewall Click this checkbox to enable the firewall on the system. Virtual Servers The port forwarding function forwards inbound traffic from the Internet to a specified single device on the network. Examples include allowing access to a web server on the network, peer-to-peer file sharing, some gaming and videoconferencing applications, and others. This function allows you to route external (Internet) calls for services such as a web server (port 80), FTP server (Port 21), or other applications through the Wireless Router to the internal network. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 47 Chapter 7: Wireless Router Configuration Screen Descriptions Click Add to add a virtual server. Select a virtual server from the list and click Delete to delete a virtual server. Virtual Servers:
Service List Select the kind of service you would like to set up, and click Add. Clear Entry To clear an entry from the Virtual Servers Table, select the entry that you want to clear and click Clear. Virtual Servers Table:
Description Enter a name for the virtual server. Inbound Port Enter the inbound port range for the virtual server. It should be the same range as the local port. Type Sets the format for the port. Options are TCP, UDP, or BOTH. Private IP Address Enter the IP address of the machine on the LAN that you want the connections to go to. Private Port Enter the private port range for the virtual server. It should be the same range as the inbound port. DMZ The DMZ feature allows you to specify one computer on the network to be placed outside of the NAT firewall. This may be necessary if the NAT feature is causing problems with an application such as a game or video conferencing application. Use this feature only on a temporary basis. The computer in the DMZ is not protected from hacker attacks. To put a computer in the DMZ, click the Enable DMZ checkbox, enter its IP address, and click Apply. IP Address Of Virtual DMZ Host:
Enable DMZ Click this checkbox to enable DMZ on the network. Static IP Displays the Static IP address. Private IP Enter the IP address of the computer to be placed in the DMZ. Be sure that the address is not in the range of addresses delivered by the DHCP server if enabled. After Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 48 placing the computer in the DMZ, all ports on the computer are open to the Internet and not protected. Chapter 7: Wireless Router Configuration Screen Descriptions WAN Ping Blocking You can configure the Wireless Router not to respond to an ICMP Ping (ping to the WAN port). This offers a heightened level of security. Block ICMP Ping:
Block ICMP Ping Enable Click this checkbox to enable WAN Ping Blocking. Remote Management Remote management lets you make changes to the Wireless Router's settings from anywhere on the Internet. Before you enable this function, make sure you have set the administrator password. Remote Management Settings:
Remote Management Enable Click this checkbox to enable the Remote Management feature. Remote IP Settings Select Any to allow management connections from any IP address, or select IP Range to specify a range of IP addresses that can connect. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 49 Chapter 7: Wireless Router Configuration Screen Descriptions Remote IP Address From/To Use these fields to enter the IP addresses that can connect to make changes to the settings. You must set Remote IP Settings to IP Range to activate these fields. Remote Access Port Enter the port that you would like to use for remote access. ALG Application layer gateway settings allow the Wireless Router to recognize and treat certain network protocols specially. Application Layer Gateway:
Click the checkbox for each network protocol for which you want special handling. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 50 Chapter 7: Wireless Router Configuration Screen Descriptions Utilities System Information This page shows a summary of the systems status. Hardware Software Version:
Serial Number This field displays the product serial number. Bootcode Version This field displays the bootcode version. Hardware Version This field displays the hardware version. Firmware Version This field displays the firmware version. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 51 Chapter 7: Wireless Router Configuration Screen Descriptions WAN Status Summary:
WAN MAC Address This field displays the WAN MAC address. Connection Setup This field displays the connection type: Dynamic or Static IP Address This field displays the WAN IP address. Subnet Mask This field displays the WAN subnet mask. Primary DNS This field displays the Primary DNS IP address. Secondary DNS This field displays the Secondary DNS IP address. Gateway This field displays the gateway IP address. LAN Status Summary:
MAC Address This field displays the LAN MAC Address. IP Address This field displays the IP Address of the LAN. Subnet Mask This field displays the subnet mask of the LAN. DHCP Server This field displays the status of the DHCP Server: Enabled or Disabled. Other Features Summary:
Firewall Settings - This field displays the status of the firewall settings: Enabled or Disabled. SSID This field displays the status of the SSID Broadcast function: Enabled or Disabled. Security This field displays the status of the Security feature: Enabled or Disabled. UPNP This field displays the status of the UPnP feature: Enabled or Disabled. Remote Management This field displays the status of the Remote Management feature:
Enabled or Disabled. WPS This field displays the status of the WPS function: Enabled or Disabled. Guest Access This field displays the status of the Guest Access function: Enabled or Disabled. Guest SSID This field displays the name of the guest network that you set up. Guest Password (PSK) This field displays the password for the guest network. Restart Router It may be necessary to restart (reboot) the Wireless Router if it begins working improperly. Restarting the Wireless Router will not delete any of the configuration settings. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 52 Chapter 7: Wireless Router Configuration Screen Descriptions To restart the Wireless Router, click Restart. Note: A dialog box prompts you to confirm that you want to restart the Wireless Router. Click OK to restart now or click Cancel to restart later. Factory Default This screen lets you restore all of the Wireless Routers configuration settings to the factory default setting. Click Factory Defaults to restore the factory default configuration settings. Note: A dialog box prompts you to confirm that you want to restore the factory default settings. Click OK to restore now or click Cancel to restore later. Firmware Upgrade From time to time, ARRIS may release new versions of firmware for the Wireless Router to provide improvements and fixes to problems that may have existed. Use the Browse button to locate the new firmware file on a local device, and click Update to start the update procedure. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 53 System Settings Chapter 7: Wireless Router Configuration Screen Descriptions This page allows you to make certain system settings. For changes to take effect, you must click Apply. Administrator Login:
Current Password Enter the old password to change the administrator password. New Password/Confirm New Password Enter the new password in both fields to change the administrator password. Login Timeout Enter the number of seconds that these web pages can remain idle before the user is logged out. Time And Time Zone:
Current Time Displays the current time. Current Language Select the language you want to use. Time Zone Select the time zone. Daylight Savings Click this checkbox to automatically update the system clock for Daylight Saving Time. Primary NTP Server The host name or IP address of the primary NTP server. Secondary NTP Server The host name or IP address of the secondary NTP server. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 54 System Log Chapter 7: Wireless Router Configuration Screen Descriptions This page displays the system logs. Click Refresh to update the list. Click Clear Log to clear the list. DDNS DDNS (Dynamic DNS) allows you to provide Internet users with a fixed domain name
(instead of an IP address which may periodically change). This allows various locations on the Internet to access the Wireless Router and the applications that are set up in the gateway's virtual servers without knowing your current IP address. For changes to take effect, you must click Apply. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 55 Chapter 7: Wireless Router Configuration Screen Descriptions Note: You must first create an account with a DDNS provider in order to use DDNS. The DDNS provider maps the chosen domain name to your IP address. DDNS Setting:
DDNS Enable Click this checkbox to enable DDNS on the system. DDNS Service Sets the DDNS provider that the account uses. The options are DynDNS and TZO. User Name Enter the user name for the DDNS account. Password Enter the password for the DDNS account. (Provided by your DDNS provider.) Domain Name Enter the domain name you selected to use with the DDNS account. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 56 Chapter 8 Troubleshooting The Wireless Router is plugged in, but the Power light is Off Check all power connections. Is the power cord plugged in firmly at both ends?
If you plugged the power cord into a power strip, make sure the strip is switched on. Avoid using an outlet controlled by a wall switch, if possible. Finally, check the fuse or circuit breaker panel. I'm not getting on the Internet (all connections) It may take several minutes to establish a connection the first time you power up the Wireless Router, especially when many people are online. Always leave the Wireless Router plugged into AC power and connected to the modem. Check the front panel lights:
The Power and WAN lights should be on. If the Power light blinks for more than 30 minutes, call your service provider for assistance. Check the cable connections. Connectors should be tight. Cables should not be pinched, kinked, or bent sharplyany of these can cause a break or short in the cable (you may have to replace the cable). Proceed to the Ethernet or wireless solutions if necessary. I'm not getting on the Internet (Ethernet) If you are using a switch, is the switch turned on?
Are you using the right type of Ethernet cable? Use an RJ45 Cat5e cable for direct connection to a computer; use a cross-over cable for connection to a switch. Press the Reset button on the back of the Wireless Router. A misconfiguration could lock out all access to the Wireless Router. If you think this has happened, see Resetting the Wireless Router to Factory Defaults. I'm not getting on the Internet (Wireless) Check the indicator lights, see Using the Wireless Router the Wi-Fi light should be on. Does the connection utility discover your wireless LAN? If you turned off Broadcast SSID you need to manually enter the name of the wireless LAN in the connection utility. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 57 Change the security mode to disabled. Enable one of the other security modes as soon as you find the problem. A misconfiguration could lock out all access to the Wireless Router. If you think this has happened, see Resetting the Wireless Router to Factory Defaults. Chapter 8: Troubleshooting My wireless Internet connection stops working sometimes This is usually caused by interference. Two common sources are 2.4GHz remote telephones and microwave ovens. If you cannot remove the interfering product, try using a different channel. I can get on the Internet, but everything is slow If the Web site you are visiting is very popular, that site may be having trouble servicing all the requests. If other sites download quickly, wait for a few minutes and try again. Usage during peak hours may also affect the connection speed. Other communications on the LAN, or interference with wireless connections, may slow down the connection. Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 58 Chapter 9 ARRIS Contacts ARRIS offers broadband service providers a complete, integrated, application-oriented IP suite of back-office automation tools for network content, subscriber, and workforce management as well as advanced advertising and on demand services. Before You Call ARRIS Support When working with Technical Support, you can help us to expedite your call by following these guidelines:
Please be prepared to give your Technical Support Contract ID number whenever you contact ARRIS Technical Support. If you do not know your Technical Support Contract ID number or have questions about a support contract, please contact ARRIS Technical Services at services.orders@arrisi.com or (678) 473-8302. Be prepared to provide your name, company name, site location, serial number of the system you are calling about (if applicable), system and software version numbers, and as much detail about the problem as possible. Review available documentation, including release notes, product and installation manuals, and online help for information about your problem. Do not reboot or restart equipment or software processes prior to consulting with ARRIS Technical Supportvital data that could assist in resolving the problem can be lost when these actions are performed. All personnel who call Technical Support should have a high level of familiarity with the ARRIS system, including knowing the system passwords. We strongly recommend that you have personnel trained through ARRIS Educational Services programs. ARRIS Technical Support supports ARRIS-supplied products only. Issues related to other hardware, software, or non-ARRIS networks must be addressed by your organization or the appropriate third-party vendor. By Telephone North America Region Legacy ARRIS Legacy Motorola Home
+1 888 221 9797 (North America)
+1 678 473 5656 (Worldwide)
+ 1 888 944 4357 (North America)
+1 215 323 2345 (Worldwide) Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 59 Latin America Region:
Chapter 9: ARRIS Contacts Legacy Motorola Home 0 800 666 3601 Legacy Motorola Home 215 323 2346 Legacy Motorola Home 800 100 694 Legacy Motorola Home 0 800 891 5314 Legacy ARRIS
+55 11 2737 7629 Legacy Motorola Home 1230 020 5564 Legacy ARRIS
+56 2 678 4500 Legacy Motorola Home 1 8005 1 80947 Legacy ARRIS
+57 1 381 9103 Legacy Motorola Home 215 323 2346 Legacy Motorola Home 215 323 2346 Legacy Motorola Home 800 6625 Legacy Motorola Home 800 0123, then 866 842 0264 Legacy Motorola Home 001 866 391 2349 Legacy ARRIS Legacy Motorola Home 001 800 203 4345 Legacy Motorola Home 0 800 5 3651 Legacy Motorola Home 866 862 2627 Legacy Motorola Home 1 888 751 8898 Legacy Motorola Home 0 800 100 9161 01 800 522 7747 or +52 55 22828531 Argentina:
Aruba:
Bolivia:
Brazil:
Chile:
Colombia:
Costa Rica:
Ecuador:
El Salvador:
Honduras:
Mexico:
Panama:
Peru:
Puerto Rico:
Rep. Dominicana:
Venezuela:
Europe Region:
Legacy ARRIS Europe:
Legacy Motorola Home Belgium:
Legacy Motorola Home Denmark:
Legacy Motorola Home Finland:
Legacy Motorola Home France:
Legacy Motorola Home Germany:
Legacy Motorola Home Hungary:
Ireland:
Legacy Motorola Home Israel Golden Lines: Legacy Motorola Home Israel Bezeq:
Legacy Motorola Home Legacy Motorola Home Israel Barak:
Italy:
Legacy Motorola Home
+31 20 311 2525 0 800 72 163 80 88 6748 0 800 114 263 0 800 90 7038 0 800 18 73019 06 800 18164 1 800 55 9871 1 809 25 2071 1 809 42 9181 1 809 31 5435 800 788 304 Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 60 Chapter 9: ARRIS Contacts Luxembourg:
Netherlands -
Holland:
Norway:
Poland:
Portugal:
Spain:
Sweden:
Switzerland:
United Kingdom:
Asia Region:
Asia Japan Region:
Japan:
Korea Region:
Korea:
Legacy Motorola Home Legacy Motorola Home 0 800 2 5310 0 800 022 0176 Legacy Motorola Home Legacy Motorola Home Legacy Motorola Home Legacy Motorola Home Legacy Motorola Home Legacy Motorola Home Legacy Motorola Home 800 15 670 00 800 111 3671 800 81 3461 900 99 1771 020 79 0241 0 800 561 872 0 800 404 8439 Legacy ARRIS Legacy Motorola Home
+86 755 8634 9110
+1 847 725 4011 (Worldwide) Legacy ARRIS Legacy Motorola Home
+81 3 5461 7320
+1 847 725 4011 (Worldwide) Legacy ARRIS Legacy Motorola Home
+82 31 740 4203
+1 847 725 4011 (Worldwide) China Region:
China:
Legacy ARRIS Legacy Motorola Home
+86 755 8634 9110 or 4008810685 (in China only)
+1 847 725 4011 (Worldwide) Australia / New Zealand Region:
Australia /
New Zealand Legacy ARRIS
+86 755 8634 9110 Legacy Motorola Home 61 3 81997220 or 1800 242664
(Australia only) Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 61 By Email North America:
Headend and Network Equipment:
RF Optics:
Ruckus, Optics, Amps, Nodes, Transmitters, CHP, Passives, OptiMax, CoreWave, CoreView CMTS Products:
CMTS Product:
Moxi and WHS Products:
D5 and DVS Products:
DVS Products:
EMP Products:
C3, C4, ICO, ASA, CxM, CMTS1000, CMTS1500, E6000 BSR, SRM4, HSIM4, TX32, RX48, SRM10G Moxi, MCR, Portal, WHS, WHS5225, MediaPlayer, Whole Home Solution, Gateway D5, Application Manager, VIPr, Hemi, Encore, Quartet, Prelude, EGT or DVS CAS, DACs, CASMR, APEX3000, NC2000, DreamGallery, Secure Media, VideoFlow, AVP100, STBs, AS-RAC, QT Plus, CherryPicker, Encoder, Astria AdEdge, APS, BEQ6XXX, BME50, BMR1200, CVEx, MSP2XXX, RMS, SBSS, SVA, VMS Digital Ad Insertion: Ad Insertion, Skyvision, Spots, ACM, Video on Demand:
VOD Products:
WorkAssure:
n5, XMS Video OnDemand, VOD, nABLE, CMM, n5, XMS, Transit B1 Video Server, M3 Video Server, cDVR Video Solution WorkAssure, I&R, SageQuest, Wireless Matrix, Tech Director, Tech Calendar, SSM Alarms Assurance Products: ServAssure, OpsLogic, Powersense, SALIVE, EventAssure, HouseCheck, Data Warehouse, Starnodes GPON, POL, Carrier Ethernet DSR, Uplink, IPTV, Encoder GPON Product:
Satellite and Modular Systems:
Korea:
Korea:
Australia / New Zealand:
Legacy ARRIS Products Legacy Motorola Home Legacy ARRIS Products Chapter 9: ARRIS Contacts RFOptics-support@arrisi.com techsupport.na@arrisi.com tac.helpdesk@arrisi.com techsupport.na@arrisi.com techsupport.na@arrisi.com tac.helpdesk@arrisi.com emp-support@arrisi.com ai-support@arrisi.com vod-support@arrisi.com tac.helpdesk@arrisi.com workassure-support@arrisi.com assurance-support@arrisi.com tac.helpdesk@arrisi.com tac.helpdesk@arrisi.com techsupport.korea@arrisi.com tac.helpdesk@arrisi.com techsupport.asia@arrisi.com Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 62 Chapter 9: ARRIS Contacts Australia / New Zealand:
Legacy Motorola Home support.anz@arrisi.com Customer Premise Equipment:
Touchstone Products: TGxxx, TMxxx, Touchstone, TTM, Packet Ace, Cornerstone, HDT, Incognito, CableModem, eMTA, Telephone Gateway Cable Modem, MTA CableModem:
International (All Products):
Latin America:
Latin America:
Europe:
Europe:
Asia:
Asia:
Japan:
Japan:
Legacy ARRIS Products Legacy Motorola Home Legacy ARRIS Products Legacy Motorola Home Legacy ARRIS Products Legacy Motorola Home Legacy ARRIS Products Legacy Motorola Home Ask ARRIS Customer Portal techsupport.na@arrisi.com tac.helpdesk@arrisi.com techsupport.cala@arrisi.com tac.helpdesk@arrisi.com techsupport.europe@arrisi.com tac.helpdesk@arrisi.com techsupport.asia@arrisi.com tac.helpdesk@arrisi.com techsupport.japan@arrisi.com tac.helpdesk@arrisi.com The Ask ARRIS Customer Portal enables you to:
Use innovative search technology to deliver fast, relevant, reliable information exactly when you need it, 24x7 Manage technical support cases for your products, support level, and site location Access technical documentation and webcasts To use the portal, you will need to register for the site using your support contract ID and email address. To access the customer portal:
http://www.arris.com/support Global Knowledge Services and Training For more information about Global Knowledge Services and the programs we offer, e-mail us at:
training@arris.com Release 33 STANDARD 1.5 February 2015 TR3300-AC 802.11ac Wireless Router User Guide 63 TR3300-AC 802.11ac Wireless Router User Guide Corporate Headquarters ARRIS Suwanee Georgia 30024 USA T: 1-678-473-2000 F: 1-678-473-8470 www.arris.com
1 2 | Label/Location Info-1 | ID Label/Location Info | 569.78 KiB | April 03 2015 / May 03 2015 |
77.75 Model:SBR-AC1750 802.11ac Wireless Router P/N:SBR00ZA7AAC1750 Input Rating:12V 2A MAX FCC ID: UIDSBR1750 IC : 6670A-SBR1750 32.6 Assembled in China Need Help: www.arris.com/consumer E214476 79.6 Model:SBR-AC1750 802.11ac Wireless Router 3 44 UPC CODE 6 0 6 4 4 9 1 0 6 5 4 1 2 5 7 2 2 1 0 0 0 1 0 Assembled in China E214476 4R*0.8 89.4 C2.80 R1 R2 R3 R4 R5 R6 R6 Release Change Rating2.5Ato2A DeleteP/S:596597-001-00 add:Need Help: www.arris.com/consumer refer to595386-dModity gift box label size:89.4*44mm Delete UL logo text 92RF Delete IC ID: text ID 24Oct14 07Nov14 14Nov14 26Nov14 16Dec14 05Jan15 02Feb15 Model:SBR-AC1750 802.11ac Wireless Router P/N:SBR00ZA7AAC1750 Input Rating:12V 2A MAX FCC ID: UIDSBR1750 IC: 6670A-SBR1750 Network Name (SSID) 2.4GHz: ARRIS-XXXX 5GHz: ARRIS-XXXX-5G Assembled in China Need Help: www.arris.com/consumer E214476 Security Mode: WPA2-PSK (AES) Wi-Fi Security Key: XXXXXXXXXX WPS PIN:XXXXXXXX SN:XXXX XXXX XXXX XXX ETH MAC:XXXXXXXXXXX WLAN-24 MAC:XXXXXXXXXXXX 38*42mm SN:XXXX XXXX XXXX XXX ETH MAC:XXXXXXXXXXXX WLAN-24 MAC:XXXXXXXXXXXX Model:SBR-AC1750 802.11ac Wireless Router FCI No.:
QTY:
42*12mm WEIGHT:
LBS:
KGS:
UPC CODE Assembled in China E214476 6 0 6 4 4 9 1 0 6 5 4 1 2 5 7 2 2 1 0 0 0 1 0 SBR-AC1750 P/S:596597-001-00 DIM LINE NO PRINT
,,labellabel3mm
(The factory Print example) Notes:
1.: 50#Mylar 2. 3./:
4.:0.- 0.2mm 5.RoHS Notes:
1.MATERIAL: 50#white Mylar 2.ADHESIVE:Embossed Adhesive 3.SIZE:77.75*79.6mm 4.PRINTING COLOR:Black 5.TOLERANCES::0,- 0.2mm 6.The material must off accord RoHS SBR-AC1750 REGULATORY LBL/Arris 932BBQ00GNARMP09006 1 7 1 1 11 2015.02.02 t r e u o R s s e e r i l W c a 1 1
. 2 0 8 0 5 7 1 C A R B S
l e d o M X A M A 2 V 2 1
g n i t a R t u p n I 0 5 7 1 C A A 7 A Z 0 0 R B S N P
0 5 7 1 R B S D U I
D I C C F 0 5 7 1 R B S A 0 7 6 6
C I 6 7 4 4 1 2 E r e m u s n o c
m o c
. s i r r a w w w
. i a n h C n i
l d e b m e s s A l p e H d e e N r e t u o R s s e e r i l W c a 1 1 2 0 8
. 0 5 7 1 C A R B S
l e d o M 0 1 0 4 0 5 0 6 1 0 2 1 2 9 7 4 5 4 2 6 1 0 6 E D O C C P U 6 7 4 4 1 2 E i a n h C n i l d e b m e s s A 0 1 3 4 3 4*3, 1 Label location
1 2 | Label/Location Info-2 | ID Label/Location Info | 434.91 KiB | April 03 2015 / May 03 2015 |
77.75 32.6 Model:TR3300-AC 802.11ac Wireless Router P/N:TR00ZA7A3300 PS:783919 Input Rating:12V 2A MAX FCC ID: UIDSBR1750 IC ID: 6670A-SBR1750 Made in China E214476 C2.80 3 76.3 40.7 4R*0.8 38.1 37 DIM LINE NO PRINT
,,labellabel3mm
, R1 R2 R3 R4 R5 Release Change Rating2.5Ato2A UsingPS: instead of P/S:
Modity:FCC ID& IC ID as SBR-AC1750 Delete UL logo text 92RF 24Oct14 07Nov14 14Nov14 11Dec14 05Jan15 Model:TR3300-AC 802.11ac Wireless Router P/N:TR00ZA7A3300 PS:783919 Input Rating:12V 2A MAX FCC ID: UIDSBR1750 IC ID: 6670A-SBR1750 Network Name (SSID) 2.4GHz: ARRIS-XXXX 5GHz: ARRIS-XXXX-5G E214476 Made in China Security Mode: WPA2-PSK (AES) PreShared Key: XXXXXXXXXXXXXXXX WPS PIN:XXXXXXXX SN:XXXXXXXXXXXXXXX 35*32.6mm ETH MAC:XXXXXXXXXXXX WLAN-24 MAC:XXXXXXXXXXXX SN:XXXXXXXXXXXXXXX ETH MAC:XXXXXXXXXXXX WLAN-24 MAC:XXXXXXXXXXXX TR3300-AC 783919 label
(The factory Print example) Notes:
1.: 50#Mylar 2. 3./:
4.:0.- 0.2mm 5.RoHS Notes:
1.MATERIAL: 50#white Mylar 2.ADHESIVE:Embossed Adhesive 3.SIZE:77.75*76.3mm 4.PRINTING COLOR:Black 5.TOLERANCES::0,- 0.2mm 6.The material must off accord RoHS TR3300-AC REGULATORY LBL/Arris 932AWD01GNARMP08919 1 5 1 1 11 2015.01.14 t r e u o R s s e e r i l W c a 1 1 2 0 8
. C A
0 0 3 3 R T
l e d o M 9 1 9 3 8 7 S P
0 0 3 3 A 7 A Z 0 0 R T N P
X A M A 2 V 2 1
g n i t a R t u p n I 0 5 7 1 R B S D U I
D I C C F 0 5 7 1 R B S A 0 7 6 6
D I C I 6 7 4 4 1 2 E i a n h C n i e d a M 3 4 3 0 1 4*3, 1 Label location
1 2 | Confidentiality | Cover Letter(s) | 21.36 KiB | April 03 2015 / May 03 2015 |
FCC, Request for non-disclosure RF_501, Issue 6 Date: 16-Jul-10 Page 1 of 1 Company Name: ARRIS Group, Inc. Address: 3871 Lakefield Drive, Suite 300 City:
Country:
SUWANEE United States Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands To: Telefication B.V., Dept. FCC TCB Subject: Request for confidentiality FCC ID: UIDSBR1750 Reference number: ######
Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:
Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (note 1):
Internal Photos Users Manual Test Set-up Photos External Photos Justification:
Planned Release Date STC: (notes 2, 3, 4, 5) Date: 2014-12-10 Name and signature of applicant: Antonio Figueiredo Notes:
1) A document or type of document can only have ONE type of confidentiality!
2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)!
3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!
5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period
1 2 | Declaration of authorization | Cover Letter(s) | 31.66 KiB | April 03 2015 / May 03 2015 |
RF_160, Issue 02 Declaration of Authorization We Name: ARRIS Group, Inc. Address: 3871 Lakefield Drive, Suite 300, SUWANEE, Georgia 30024, United States Declare that:
Name Representative of agent: Ms. Cathy Wang Agent Company name: BTL Inc. Address: B1, No. 37, Lane 365, YangGuang St., NeiHu District 114, Taipei, Taiwan is authorized to apply for Certification and signing related documents of the following product(s), including 731 form(s):
Product description: 802.11ac wireless router Type designation: TR3300-AC; SBR-AC1750 Trademark: ARRIS on our behalf. Date: 2014-12-10 City: SUWANEE Name: Antonio Figueiredo Function: Manager -Regulatory/Compliance Signature:
Notes:
(1): Required for FCC application
(2): For FCC it must be the Grantee Code owner or the authorized agent.
1 2 | FCC DOC | Cover Letter(s) | 531.06 KiB | April 03 2015 / May 03 2015 |
CERTIFICATE OF COMPLIANCE Authorized under Declaration of Conformity according to 47 CFR, Part 2 and Part 15 of the FCC Rules. The product listed in follows was (were) tested in the BTL EMC Laboratory to comply with the criteria limits Class B of conducted and radiated emissions of the Technical Standards FCC Part 15, Subpart B, established by the FCC, USA. Equipment Model Name Brand Name ARRIS Applicant Address Standard(s) 802.11ac Wireless Router TR3300-AC; SBR-AC1750 ARRIS Group, Inc. 3871 Lakefield Drive, Suite 300 Suwanee Georgia 30024 United States FCC Part 15, Subpart B: 2013 ANSI C63.4-2009 ICES-003 Issue 5: 2012 CISPR 22: 2008 CAN/CSA-CISPR 22-10 BTL-FCCE-1-1410139 Report(s) The test data, data evaluation, and equipment configuration contained in our test report(s) above was (were) obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of TAF according to the ISO-17025 quality assessment standard and technical standard(s). The test data contained in the referenced test report relate only to the EUT sample and item(s) tested. Andy Chiu Authorized Signatory BTL INC. B1, No. 37, Lane 365, Yang-Guang St., Nei-Hu District, Taipei City 114, Taiwan. TEL:+886-2-2657-3299 FAX:+886-2-2657-3331
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2015-03-05 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | Original Equipment |
2 | 2412 ~ 2462 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2015-03-05
|
||||
1 2 | Applicant's complete, legal business name |
ARRIS
|
||||
1 2 | FCC Registration Number (FRN) |
0009654609
|
||||
1 2 | Physical Address |
3871 Lakefield Drive Suite 300
|
||||
1 2 |
3871 Lakefield Drive
|
|||||
1 2 |
SUWANEE
|
|||||
1 2 |
SUWANEE, GA
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
c******@telefication.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
UID
|
||||
1 2 | Equipment Product Code |
SBR1750
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
A******** A******** F********
|
||||
1 2 | Title |
Manager -Regulatory/Compliance
|
||||
1 2 | Telephone Number |
678-4********
|
||||
1 2 | Fax Number |
678-4********
|
||||
1 2 |
t******@arrisi.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
BTL Inc.
|
||||
1 2 | Name |
S****** L********
|
||||
1 2 | Physical Address |
B1, No. 37, Lane 365, YangGuang St.
|
||||
1 2 |
Taiwan
|
|||||
1 2 | Telephone Number |
86-76******** Extension:
|
||||
1 2 | Fax Number |
86-76********
|
||||
1 2 |
c******@newbtl.com
|
|||||
app s | Non Technical Contact | |||||
1 2 | Firm Name |
BTL Inc.
|
||||
1 2 | Name |
C******** W******
|
||||
1 2 | Physical Address |
B1, No. 37, Lane 365, YangGuang St.
|
||||
1 2 |
Taiwan
|
|||||
1 2 | Telephone Number |
86-76******** Extension:
|
||||
1 2 | Fax Number |
86-76********
|
||||
1 2 |
c******@newbtl.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | NII - Unlicensed National Information Infrastructure TX | ||||
1 2 | DTS - Digital Transmission System | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 802.11ac Wireless Router | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device have 20 MHz,40 MHz and 80 MHz bandwidth modes. | ||||
1 2 | Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device have 20 MHz and 40 MHz bandwidth modes. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
BTL Inc.
|
||||
1 2 | Name |
A**** C****
|
||||
1 2 | Telephone Number |
886-2******** Extension:
|
||||
1 2 | Fax Number |
886-2********
|
||||
1 2 |
A******@newbtl.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15E | 38 | 5180 | 5240 | 0.16 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15E | 38 | 5745 | 5825 | 0.35 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC MO | 2412.00000000 | 2462.00000000 | 0.5000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC