all | frequencies |
|
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|---|
manuals | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
Users Manual | Users Manual | 646.13 KiB | March 02 2016 / January 08 2016 | |||
1 2 |
|
Users Manual Safety and Regulatory Info | Users Manual | 94.06 KiB | March 02 2016 / January 08 2016 | |||
1 2 |
|
Internal Photos | Internal Photos | 1.27 MiB | March 02 2016 / January 08 2016 | |||
1 2 |
|
External Photos | External Photos | 272.38 KiB | March 02 2016 / January 08 2016 | |||
1 2 |
|
Label | ID Label/Location Info | 541.00 KiB | March 02 2016 | |||
1 2 | Block Diagram | Block Diagram | February 03 2016 | confidential | ||||
1 2 |
|
Confidentiality Request Letter | Cover Letter(s) | 135.68 KiB | March 02 2016 | |||
1 2 |
|
DOC Letter | Cover Letter(s) | 134.67 KiB | March 02 2016 | |||
1 2 | Operational Description | Operational Description | February 03 2016 | confidential | ||||
1 2 | Operational Description Security Control | Operational Description | February 03 2016 | confidential | ||||
1 2 |
|
Power of Attorney Letter | Cover Letter(s) | 79.66 KiB | March 02 2016 | |||
1 2 | RF Exposure Info | March 02 2016 | ||||||
1 2 | Schematics | Schematics | February 03 2016 | confidential | ||||
1 2 |
|
Test Report DTS | Test Report | 1.47 MiB | March 02 2016 | |||
1 2 | Test Setup Photos | March 02 2016 / January 08 2016 | ||||||
1 2 |
|
AD HOC Declaration | Cover Letter(s) | 76.73 KiB | March 02 2016 | |||
1 2 | Operational Description Software Security | Operational Description | February 03 2016 | confidential | ||||
1 2 | RF Exposure Info | March 02 2016 | ||||||
1 2 | Test Report | March 02 2016 | ||||||
1 2 | Test Setup Photos | March 02 2016 / January 08 2016 |
1 2 | Users Manual | Users Manual | 646.13 KiB | March 02 2016 / January 08 2016 |
Gateway Label Note: The gateway label is located on the bottom of your SBG6580. You may need the following information to activate your gateway and set up a wireless network connection:
Model - Gateway model name. SSID - Default name of your wireless network. It is highly recommended that you change the default network name or add additional wireless networks. WI-FI SECURITY KEY - Wireless network password to access your wireless network using a secure gateway. It is highly recommended that you change the default Wi-Fi Security Key to a more secure password to protect your wireless network from unauthorized access. S/N - Gateway serial number. Your service provider may request the serial number to activate your gateway. HFC MAC ID - Your service provider may request the Media Access Control
(MAC) number to activate your gateway. Notes Write your additional wireless network information here for future reference. SSID #1:
Wi-Fi Security Key #1:
SSID #2:
Wi-Fi Security Key #2:
SSID #3:
Wi-Fi Security Key #3:
SSID #4:
Wi-Fi Security Key #4:
Additional SSIDs:
Addl Wi-Fi Security Keys:
2015 ARRIS Enterprises, Inc. All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means without written permission from ARRIS Enterprises, Inc. ARRIS, SURFboard, and the ARRIS logo are all trademarks or registered trademarks of ARRIS Enterprises, Inc. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and the names of their products. ARRIS disclaims proprietary interest in the marks and names of others. All other product or service names are the property of their respective owners. No part of the contents of this document may be reproduced or transmitted in any form or by any means without written permission of the publisher. 598484-001-a 10/2015 4 SBG6580 Wireless Cable Modem Gateway Quick Start Guide In the Box SBG6580 Wireless Cable Modem Gateway Power Supply Ethernet Cable Software License
& Warranty Card Support Information Card Quick Start Guide What You Should Know The SURFboard SBG6580 is a combination DOCSIS 3.0 cable modem, wireless access point, and four-port Ethernet router device. It provides ultra high-speed wireless Internet access on your home or small business network. The SBG6580 connects to the existing coaxial cable connection in your home and does not require any new wiring. This quick start guide will help you install your SBG6580 and set up a secure wireless network connection on your home network. For additional help with setting up your SBG6580, you can view the SBG6580 Video Tutorials available online at the ARRIS Support website, www.arris.com/consumer. To access the videos, you can visit the support website and follow the prompts for SBG6580 or you can scan the QR code. To change your wireless network configuration and other advanced gateway settings, see the SURFboard SBG6580 User Guide available online at the ARRIS Support website. Frequently asked questions (FAQs) and additional product information are also available. IMPORTANT! During the installation or gateway activation, you may have to contact your service provider for assistance. Make sure you have the Gateway Model name (SBG6580), HFC MAC ID, and Serial number (S/N) listed on the gateway label on the bottom of your SBG6580 (see page 4). BEFORE RETURNING THIS PRODUCT TO THE STORE for any reason, please call ARRIS Technical Support for assistance: 1-877-466-8646. For Comcast subscribers only, please visit www.comcast.com/activate before calling Comcast or ARRIS. Install the Gateway Note: Additional items (coaxial cable or RF splitter) that are not included with your SBG6580 may be needed to complete your gateway installation. 1. Connect the coaxial cable from the cable wall outlet or RF splitter
(optional) to the Cable connector on the rear of your SBG6580. Use your hand to tighten each connector to avoid damaging them. 2. Connect the Ethernet cable to the Ethernet port on your computer and to an available Ethernet port on the rear of your SBG6580. 3. Connect the power cord to the Power port on the rear of your SBG6580 and then plug it into an electrical wall outlet. This automatically powers ON your SBG6580. Check the front panel LEDs on your SBG6580. During the initial startup, the Power, Receive, Send, and Online LEDs should light up. See Front Panel LEDs for more LED information. 2 Set Up a Wireless Network Connection Choose one of the following two options to set up your wireless network connections. When done, continue with Test Your Wireless Network Connection. Computer Wireless Network Options WPS Pairing Button A Set Up the Wireless Network on Your Computer Note: The steps for setting up a wireless network may differ slightly depending on the operating system installed on your computer. The following steps apply to Windows 7. 1. From the Windows task bar on your computer, click the following in sequential order to open the list of available wireless networks:
Start button Control Panel Network and Sharing Center Connect to a network 2. Scroll down the list and click on the wireless network name or SSID for your SBG6580. The SSID is listed on the gateway label on the bottom of your SBG6580. 3. Select Connect automatically to set up automatic log on connections for the wireless devices on your home network. 4. Click Connect to open the Connect to a Network window. 5. Type your wireless network security code or password in the Security key field. Note: Enter the Wi-Fi Security Key listed on the gateway label or create your own network password (see the SURFboard SBG6580 User Guide for more information on changing your network password). 6. Select Hide characters to encrypt your wireless network password for security purposes and then click OK to complete the wireless network connection. The Successfully added message should display. 7. Close the Wireless Network Connection window. 3 Test the Gateway Connection 1. Power ON your computer and log in. 2. Contact your service provider to activate (provision) your SBG6580. Note: Your service provider may allow for automatic activation which will automatically launch a special website when you open a web browser. If so, continue with step 3. Otherwise, contact your service provider. 3. Open a web browser on your computer (such as Internet Explorer, Google Chrome, Firefox, or Safari). 4. Type a valid URL (such as www.surfboard.com) in the address bar and press Enter. The ARRIS website should open. If it fails to open, contact your service provider to set up your Internet service or activate your SBG6580. Front Panel LEDs During normal operation, the Power, Receive, Send, and Online LEDs on the SBG6580 front panel should always be lit. The Wireless LED will light up when a wireless connection is made on your home network. If an LED did not light up, contact your service provider for assistance. Power - Lit SOLID when power is connected Receive - Lit SOLID when locked on a downstream channel Send - Lit SOLID when locked on an upstream channel Online - Lit SOLID when connected to the network Wireless -
Lit SOLID when wireless pairing with all devices is complete; Amber LED will FLASH when WPS is active WPS Pairing Button B Use the WPS Pairing Button Note: To use Wi-Fi Protected Setup (WPS), your computer must support WPS and also have WPA security compatibility. The WPS option automatically assigns a random SSID wireless network name and Wi-Fi Security Key to connect your SBG6580 and other WPS-enabled wireless devices to your wireless network. 1. Power ON your SBG6580 and other WPS-enabled wireless devices that you want to connect to your wireless network. 2. Press the WPS button on the SBG6580 front panel. 3. Press and hold the WPS button on your WPS-enabled computer or other WPS device for five or more seconds, then release. 4. Repeat steps 2 and 3 for each additional WPS-enabled wireless device. Test Your Wireless Network Connection 1. If connected, disconnect the Ethernet cable from your computer and the SBG6580. 2. Open a web browser on your computer. 3. Type a valid URL (such as www.surfboard.com) in the web browser address bar and press Enter. If the website fails to open, please contact your service provider. Start the Gateway Web Manager Use the SBG6580 Web Manager to set up and manage your wireless gateway and network security configurations. To access the web manager:
1. Open a web browser on your computer. 2. Type 192.168.0.1 in the address bar, and press Enter. 3. Type the default user name: admin. 4. Type the default password: motorola. 5. Click Login to open the SBG6580 Web Manager.
1 2 | Users Manual Safety and Regulatory Info | Users Manual | 94.06 KiB | March 02 2016 / January 08 2016 |
Software License, Warranty, Safety, and Regulatory Information Wireless Cable Modem Gateway-SBG6580 SAFETY AND REGULATORY INFORMATION Important Safety Instructions Read This Before You Begin When using your equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
Read all of the instructions listed here and/or in the user manual before you operate this device. Give particular attention to all safety precautions. Retain the instructions for future reference. This device must be installed and used in strict accordance with manufacturers instructions, as described in the user documentation that is included with the device. Comply with all warning and caution statements in the instructions. Observe all warning and caution symbols that are affixed to this device. To prevent fire or shock hazard, do not expose this device to rain or moisture. The device must not be exposed to dripping or splashing. Do not place objects filled with liquids, such as vases, on the device. This device was qualified under test conditions that included the use of the supplied cables between system components. To ensure regulatory and safety compliance, use only the provided power and interface cables and install them properly. Different types of cord sets may be used for connections to the main POWER supply circuit. Use only a main line cord that complies with all applicable device safety requirements of the country of use. Installation of this device must be in accordance with national wiring codes and conform to local regulations. Operate this device only from the type of power source indicated on the devices marking label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. Do not overload outlets or extension cords, as this can result in a risk of fire or electric shock. Overloaded AC outlets, extension cords, frayed power cords, damaged or cracked wire insulation, and broken plugs are dangerous. They may result in a shock or fire hazard. Route power supply cords so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords where they are attached to plugs and convenience receptacles, and examine the point where they exit from the device. Place this device in a location that is close enough to an electrical outlet to accommodate the length of the power cord. Place the device to allow for easy access when disconnecting the power cord of the device from the AC wall outlet. Do not connect the plug into an extension cord, receptacle, or other outlet unless the plug can be fully inserted with no part of the blades exposed. Place this device on a stable surface. 1 Software License, Warranty, Safety, and Regulatory Information Wireless Cable Modem Gateway-SBG6580 Avoid damaging the cable modem with static by touching the coaxial cable when it is attached to the earth-grounded coaxial cable-TV wall outlet. Always first touch the coaxial cable connector on the cable modem when disconnecting or reconnecting the Ethernet cable from the cable modem or users PC. It is recommended that the customer install an AC surge protector in the AC outlet to which this device is connected. This is to avoid damaging the device by local lightning strikes and other electrical surges. Postpone installation until there is no risk of thunderstorm or lightning activity in the area. Do not use this product near water: for example, near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. Do not cover the device or block the airflow to the device with any other objects. Keep the device away from excessive heat and humidity and keep the device free from vibration and dust. Wipe the device with a clean, dry cloth. Never use cleaning fluid or similar chemicals. Do not spray cleaners directly on the device or use forced air to remove dust. For added protection, unplug the device from the wall outlet and disconnect the cables to avoid damage to this device due to lightning and power surges. Upon completion of any service or repairs to this device, ask the service technician to perform safety checks to determine that the device is in safe operating condition. Do not open the device. Do not perform any servicing other than that contained in the installation and troubleshooting instructions. Refer all servicing to qualified service personnel. This device should not be used in an environment that exceeds 104 F (40 C). SAVE THESE INSTRUCTIONS Note to CATV System Installer This reminder is provided to call the CATV system installers attention to Section 820.93 of the National Electric Code, which provides guidelines for proper grounding and, in particular, specifies that the Coaxial cable shield shall be connected to the grounding system of the building, as close to the point of cable entry as practical. Caring for the Environment By Recycling When you see this symbol on an ARRIS device, do not dispose of the product with residential or commercial waste. Recycling Your ARRIS Equipment Please do not dispose of this product with your residential or commercial waste. Some countries or regions, such as the European Union, have set up systems to collect and recycle electrical and electronic waste items. Contact your local authorities for information about practices established for your region. 2 Software License, Warranty, Safety, and Regulatory Information Wireless Cable Modem Gateway-SBG6580 FCC STATEMENTS FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the device and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by ARRIS for compliance could void the users authority to operate the equipment. FCC Declaration of Conformity ARRIS Enterprises, Inc., 3871 Lakefield Drive, Suwanee, GA 30024, declares that the DOCSIS 3.0 Wireless Cable Modem Gateway-SBG6580 complies with 47 CFR Parts 2 and 15 of the FCC rules as a Class B digital device. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To comply with the FCC RF exposure compliance requirements, the separation distance between the antenna and any persons body (including hands, wrists, feet and ankles) must be at least 20 cm (8 inches). This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter except those already approved in this filing. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destinations. The firmware setting is not accessible by the end user. Industry Canada (IC) Statement This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
This device may not cause interference, and This device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. In Canada, RLAN devices are restricted from using the 5600-5650 MHz frequency band. 3 Software License, Warranty, Safety, and Regulatory Information Wireless Cable Modem Gateway-SBG6580 Caution: To reduce the potential for harmful interference to co-channel mobile satellite systems, use of the 5150-5250 MHz frequency band is restricted to indoor use only. High power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 5650-
5850 MHz frequency bands. These radars could cause interference and/or damage to License ExemptLocal Area Network (LE-LAN) devices. IC Radiation Exposure Statement Important Note: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Avis D'Industrie Canada (IC) Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
l'appareil ne doit pas produire de brouillage, et l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Cet appareil numrique de classe B est conforme la norme NMB-003 du Canada. Au Canada, les appareils de rseau local sans fil ne sont pas autoriss utiliser les bandes de frquence 5600-5650 MHz. Avertissement: afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux, les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation l'intrieur. Les radars haute puissance sont dfinis en tant qu'utilisateurs principaux (c.--d. prioritaires) des bandes de frquences 5250-5350 MHz et 5650-5850 MHz. Ces radars peuvent causer de l'interfrence ou des dommages susceptibles de nuire aux appareils exempts de licencerseau local (LAN-EL). Dclaration de IC Sur L'Exposition Aux Rayonnements Note Importante : cet quipement est conforme aux limites d'exposition aux rayonnements tablies par IC pour un environnement non contrl. Cet quipement doit tre install et utilis de manire maintenir une distance d'au moins 20 cm entre la source de rayonnement et votre corps. WIRELESS LAN INFORMATION This device is a wireless network product that uses Direct Sequence Spread Spectrum (DSSS) and Orthogonal Frequency-Division Multiple Access (OFDMA) radio technologies. The device is designed to be interoperable with any other wireless DSSS and OFDMA products that comply with:
The IEEE 802.11 Standard on Wireless LANs (Revision B, Revision G, and Revision N), as defined and approved by the Institute of Electrical Electronics Engineers The Wireless Fidelity (Wi-Fi) certification as defined by the Wireless Ethernet Compatibility Alliance (WECA). 4 Software License, Warranty, Safety, and Regulatory Information Wireless Cable Modem Gateway-SBG6580 Restrictions on the Use of Wireless Devices In some situations or environments, the use of wireless devices may be restricted by the proprietor of the building or responsible representatives of the organization. For example, using wireless equipment in any environment where the risk of interference to other devices or services is perceived or identified as harmful. If you are uncertain of the applicable policy for the use of wireless equipment in a specific organization or environment, you are encouraged to ask for authorization to use the device prior to turning on the equipment. The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of the devices included with this product, or the substitution or attachment of connecting cables and equipment other than specified by the manufacturer. Correction of the interference caused by such unauthorized modification, substitution, or attachment is the responsibility of the user. The manufacturer and its authorized resellers or distributors are not liable for any damage or violation of government regulations that may arise from failing to comply with these guidelines. Note: The use of the 5150-5250 MHz frequency band is restricted to Indoor Use Only. Security Warning: This device allows you to create a wireless network. Wireless network connections may be accessible by unauthorized users. For more information on how to protect your network, see the SBG6580 User Guide for instructions or visit the ARRIS Support website, www.arris.com/consumer. SOFTWARE LICENSE Wireless Cable Modem Gateway-SBG6580 ARRIS Enterprises, Inc. (ARRIS) 3871 Lakefield Drive, Suwanee, GA 30024 IMPORTANT: PLEASE READ THIS SOFTWARE LICENSE (LICENSE) CAREFULLY BEFORE YOU INSTALL, DOWNLOAD, OR USE ANY APPLICATION SOFTWARE, USB DRIVER SOFTWARE, FIRMWARE, AND RELATED DOCUMENTATION (SOFTWARE) PROVIDED WITH THE ARRIS CABLE DATA PRODUCT
(THE CABLE DATA PRODUCT). BY USING THE CABLE DATA PRODUCT AND/OR INSTALLING, DOWNLOADING, OR USING ANY OF THE SOFTWARE, YOU INDICATE YOUR ACCEPTANCE OF EACH OF THE TERMS OF THIS LICENSE. UPON ACCEPTANCE, THIS LICENSE WILL BE A LEGALLY BINDING AGREEMENT BETWEEN YOU AND ARRIS. THE TERMS OF THIS LICENSE APPLY TO YOU AND TO ANY SUBSEQUENT USER OF THIS SOFTWARE. IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS LICENSE (I) DO NOT INSTALL OR USE THE SOFTWARE AND (II) RETURN THE CABLE DATA PRODUCT AND THE SOFTWARE (COLLECTIVELY, PRODUCT), INCLUDING ALL COMPONENTS, DOCUMENTATION, AND ANY OTHER MATERIALS PROVIDED WITH THE PRODUCT, TO YOUR POINT OF PURCHASE OR SERVICE PROVIDER, AS THE CASE MAY BE, FOR A FULL REFUND. BY INSTALLING OR USING THE SOFTWARE, YOU AGREE TO BE BOUND BY THE PROVISIONS OF THIS LICENSE AGREEMENT. The Software includes associated media, any printed materials, and any on-line or electronic documentation, as well as any updates, revisions, bug fixes, or drivers obtained by you from ARRIS or your service provider. Software provided by 3rd parties may be subject to separate end-user license agreements from the manufacturers of such Software. The Software is never sold. ARRIS licenses the Software to the original customer and to any subsequent licensee for personal use only on the terms of this License. ARRIS and its 3rd party licensors retain the ownership of the Software. 5 Software License, Warranty, Safety, and Regulatory Information Wireless Cable Modem Gateway-SBG6580 You may:
USE the Software only in connection with the operation of the Product. TRANSFER the Software (including all component parts and printed materials) permanently to another person, but only if the person agrees to accept all of the terms of this License. If you transfer the Software, you must at the same time transfer the Product and all copies of the Software (if applicable) to the same person or destroy any copies not transferred. TERMINATE this License by destroying the original and all copies of the Software (if applicable) in whatever form. You may not:
(1) Loan, distribute, rent, lease, give, sublicense, or otherwise transfer the Software, in whole or in part, to any other person, except as permitted under the TRANSFER paragraph above. (2) Copy or translate the User Guide included with the Software, other than for personal use. (3) Copy, alter, translate, decompile, disassemble, or reverse engineer the Software, including, but not limited to, modifying the Software to make it operate on non-compatible hardware. (4) Remove, alter, or cause not to be displayed any copyright notices or startup message contained in the Software programs or documentation. (5) Export the Software or the Product components in violation of any United States export laws. The Product is not designed or intended for use in on-line control of aircraft, air traffic, aircraft navigation, or aircraft communications; or in design, construction, operation, or maintenance of any nuclear facility. ARRIS AND ITS 3rd PARTY LICENSORS DISCLAIM ANY EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR SUCH USES. YOU REPRESENT AND WARRANT THAT YOU SHALL NOT USE THE PRODUCT FOR SUCH PURPOSES. Title to this Software, including the ownership of all copyrights, mask work rights, patents, trademarks, and all other intellectual property rights subsisting in the foregoing, and all adaptations to and modifications of the foregoing, shall at all times remain with ARRIS and its 3rd party licensors. ARRIS retains all rights not expressly licensed under this License. The Software, including any images, graphics, photographs, animation, video, audio, music, and text incorporated therein, is owned by ARRIS or its 3rd party licensors and is protected by United States copyright laws and international treaty provisions. Except as otherwise expressly provided in this License, the copying, reproduction, distribution or preparation of derivative works of the Software, any portion of the Product or the documentation is strictly prohibited by such laws and treaty provisions. Nothing in this License constitutes a waiver of the rights of ARRIS under United States copyright law. This License and your rights regarding any matter it addresses are governed by the laws of the Commonwealth of Pennsylvania, without reference to conflict of laws principles. THIS LICENSE SHALL TERMINATE AUTOMATICALLY if you fail to comply with the terms of this License. ARRIS is not responsible for any 3rd party software provided as a bundled application, or otherwise, with the Software. U.S. Government Restricted Rights The Product and documentation is provided with RESTRICTED RIGHTS. The use, duplication, or disclosure by the Government is subject to restrictions as set forth in subdivision (c)(1)(ii) of The Rights in Technical Data and Computer Software clause at 52.227-7013. The contractor/manufacturer is ARRIS Enterprises, Inc., 3871 Lakefield Drive, Suwanee, GA 30024. 6 Software License, Warranty, Safety, and Regulatory Information Wireless Cable Modem Gateway-SBG6580 WARRANTY INFORMATION Wireless Cable Modem Gateway-SURFboard & Touchstone SBG6580 ARRIS Enterprises, Inc. (ARRIS) Retail Purchasers (SURFboard): If you purchased this Product directly from ARRIS or from an authorized ARRIS retail reseller, ARRIS warrants to you, the original end user customer, that (A) the Product, excluding Software, will be free from defects in materials and workmanship under normal use, and (B) with respect to Software, (i) the media on which the Software is provided will be free from defects in material and workmanship under normal use, and (ii) the Software will perform substantially as described in its documentation. This Limited Warranty to you, the original end user customer, continues (A) for Software and the media upon which it is provided, for a period of ninety (90) days from the date of purchase from ARRIS or an authorized ARRIS reseller, and (B) for the Product (excluding Software), for a period of two (2) years from the date of purchase from ARRIS or from an authorized ARRIS reseller. To take advantage of this Limited Warranty or to obtain technical support, you must call the ARRIS toll-free telephone number 1-877-466-8646. Technical support charges may apply. ARRIS sole and exclusive obligation under this Limited Warranty for retail sales shall be to repair or replace any Product or Software that does not meet this Limited Warranty. All warranty claims must be made within the applicable Warranty Period. Cable Operator or Service Provider Arrangements (Touchstone). If you did not purchase this Product directly from ARRIS or from an ARRIS authorized retail reseller, ARRIS does not warrant this Product to you, the end-user. A limited warranty for this Product (including Software) may have been provided to your cable operator or Internet Service Provider (Service Provider) from whom you obtained the Product. Please contact your Service Provider if you experience problems with this Product. General Information. The warranties described in this Section shall not apply: (i) to any Product subjected to accident, misuse, neglect, alteration, Acts of God, improper handling, improper transport, improper storage, improper use or application, improper installation, improper testing or unauthorized repair; or (ii) to cosmetic problems or defects which result from normal wear and tear under ordinary use, and do not affect the performance or use of the Product. ARRIS warranties apply only to a Product that is manufactured by ARRIS and identified by ARRIS owned trademark, trade name or product identification logos affixed to the Product. ARRIS does not warrant to you, the end user, or to anyone else that the Software will perform error free or without bugs. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. ARRIS IS NOT RESPONSIBLE FOR, AND PROVIDES AS IS ANY SOFTWARE SUPPLIED BY 3RD PARTIES. EXCEPT AS EXPRESSLY STATED IN THIS SECTION (WARRANTY INFORMATION), THERE ARE NO WARRANTIES OF ANY KIND RELATING TO THE PRODUCT, EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR THE WARRANTY AGAINST INFRINGEMENT PROVIDED IN THE UNIFORM COMMERCIAL CODE. Some states do not allow for the exclusion of implied warranties, so the above exclusion may not apply to you. What additional provisions should I be aware of? Because it is impossible for ARRIS to know the purposes for which you acquired this Product or the uses to which you will put this Product, you assume full responsibility for the selection of the Product for its installation and use. While every reasonable effort has been made to insure that you will receive a Product that you can use and enjoy, ARRIS does not warrant that the functions of the Product will meet your requirements or that the operation of the Product will be uninterrupted or error-free. ARRIS IS NOT RESPONSIBLE FOR PROBLEMS OR DAMAGE CAUSED BY THE INTERACTION OF THE PRODUCT WITH ANY OTHER SOFTWARE OR HARDWARE. ALL WARRANTIES ARE VOID IF THE PRODUCT IS OPENED, ALTERED, AND/OR DAMAGED. 7 Software License, Warranty, Safety, and Regulatory Information Wireless Cable Modem Gateway-SBG6580 THESE ARE YOUR SOLE AND EXCLUSIVE REMEDIES for any and all claims that you may have arising out of or in connection with this Product, whether made or suffered by you or another person and whether based in contract or tort. IN NO EVENT SHALL ARRIS BE LIABLE TO YOU OR ANY OTHER PARTY FOR ANY DIRECT, INDIRECT, GENERAL, SPECIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY OR OTHER DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF INFORMATION OR ANY OTHER PECUNIARY LOSS), OR FROM ANY BREACH OF WARRANTY, EVEN IF ARRIS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO CASE SHALL ARRIS LIABILITY EXCEED THE AMOUNT YOU PAID FOR THE PRODUCT. These matters are governed by the laws of the Commonwealth of Pennsylvania, without regard to conflict of laws principles and excluding the provisions of the United Nations Convention on Contracts for the International Sale of Goods. Retail Purchasers Only (SURFboard). If you purchased this Product directly from ARRIS or from an ARRIS authorized retail reseller, please call the ARRIS toll-free telephone number, 1-877-466-8646, for warranty service or technical support. Technical support charges may apply. For online technical support, please visit www.arris.com/consumer. Cable Operator or Service Provider Arrangements (Touchstone). If you did not purchase this Product directly from ARRIS or from an ARRIS authorized retail reseller, please contact your Service Provider for technical support. 2015 ARRIS Enterprises, Inc. All rights reserved. No part of this publication may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from ARRIS Enterprises, Inc. (ARRIS). ARRIS reserves the right to revise this publication and to make changes in content from time to time without obligation on the part of ARRIS to provide notification of such revision or change. ARRIS, Touchstone, SURFboard, and the ARRIS logo are trademarks or registered trademarks of ARRIS Enterprises, Inc. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and the names of their products. ARRIS disclaims proprietary interest in the marks and names of others. ARRIS provides this guide without warranty of any kind, implied or expressed, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. ARRIS may make improvements or changes in the product(s) described in this manual at any time. 597558-001-a 04/15 8
1 2 | Internal Photos | Internal Photos | 1.27 MiB | March 02 2016 / January 08 2016 |
Report No. : EP5D2512 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page Number Report Version
: B4 of B14
: Rev. 01 Report No. : EP5D2512 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page Number Report Version
: B5 of B14
: Rev. 01 Report No. : EP5D2512 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page Number Report Version
: B6 of B14
: Rev. 01 Report No. : EP5D2512 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page Number Report Version
: B7 of B14
: Rev. 01 Report No. : EP5D2512 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page Number Report Version
: B8 of B14
: Rev. 01 Report No. : EP5D2512 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page Number Report Version
: B9 of B14
: Rev. 01 Report No. : EP5D2512 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page Number Report Version
: B10 of B14
: Rev. 01 Report No. : EP5D2512 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page Number Report Version
: B11 of B14
: Rev. 01 Report No. : EP5D2512 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page Number Report Version
: B12 of B14
: Rev. 01 Report No. : EP5D2512 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page Number Report Version
: B13 of B14
: Rev. 01
1 2 | External Photos | External Photos | 272.38 KiB | March 02 2016 / January 08 2016 |
APPENDIX B. Photographs of EUT Report No. : EP5D2512 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page Number Report Version
: B1 of B14
: Rev. 01 Report No. : EP5D2512 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page Number Report Version
: B2 of B14
: Rev. 01 Report No. : EP5D2512 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page Number Report Version
: B14 of B14
: Rev. 01
1 2 | Label | ID Label/Location Info | 541.00 KiB | March 02 2016 |
A First release for certification. 29-Jan-2016 Tiger XIAO FCI:024 Model: SBG6580-2 P/N: SBG00DAE6580 DOCSIS 3.0 CAN ICES-3(B)/NMB-3(B) FCC ID: UIDSBG6580-2 IC6670A-SBG6580V2 Input Voltage: +12VDC - - - ; 1.5A SSID: XXXXXXXX-XXXXX WI-FI SECURITY KEY:
XXXX XXXX XXXX XXXX XXXX ASSEMBLED IN CHINA X X X X X X X X X X X X
:
D I C A M C F H X X X X X X X X X X X X X X X
:
N S
/
X X X X X X X X X X X X
:
D I C A M T M G M Y A W E T A G Unit label Scale: 1:1 Tiger XIAO LBL, REGULATORY/PRODUCT ID, SBG6580-2 ARMP09637 SBG6580-2 The gateway label is located on the bottom of the EUT
1 2 | Confidentiality Request Letter | Cover Letter(s) | 135.68 KiB | March 02 2016 |
Date: January 26, 2016 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for confidentiality FCC ID: UIDSBG6580-2 To whom it may concern:
Short-term confidentiality Pursuant to DA 04-1705 of the Commissions public notice, in order to comply with the marketing regulations in 47CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-
term confidentiality request on the following attachments for 180 days. 1. Internal Photographs 2. External Photographs 3. Users manual 4. Test Set up photos Permanent confidentiality Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below:
1. Block Diagram 2. Schematics 3. Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Applicant Address
: ARRIS Group, Inc.
: 3871 Lakefield Drive Suite 300 Suwanee, Georgia 30024 United States Signature
:
_________________________________ Name and Job Title.
: Antonio A Figueiredo, Regulatory/Compliance E-mail
: tony.figueiredo@arris.com 3871 Lakefield Drive Suwanee, GA 30024 phone: 678-473-8400 www.arris.com
1 2 | DOC Letter | Cover Letter(s) | 134.67 KiB | March 02 2016 |
Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Date: January 26, 2016 Subject: FCC Application for FCC ID: UIDSBG6580-2 To Whom it may concern, We, the undersigned, would like to declare that the composite portion catagorized as computer peripheral has been authorized under the Declaration of Conformity procedures. Applicant Address Signature Name and Job Title. E-mail Tel.
: ARRIS Group, Inc.
: 3871 Lakefield Drive Suite 300 Suwanee Georgia 30024 United States
:
_________________________________
: Antonio A Figueiredo, Regulatory/Compliance
: tony.figueiredo@arris.com
: 678-473-5067 3871 Lakefield Drive Suwanee, GA 30024 phone: 678-473-8400 www.arris.com
1 2 | Power of Attorney Letter | Cover Letter(s) | 79.66 KiB | March 02 2016 |
Date: 2016/1/26 Federal Communications Commission 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Product Certification Representative Authorization Letter FCC ID: UIDSBG6580-2 Product name: Wireless Cable Modem Gateways To whom it may concern:
We the undersigned, hereby authorize following person to act as our agent in the preparation of an application for equipment authorization of model SBG6580-2 to the FCC Rules and Regulations. Sporton International Inc. Address
:
No. 52, Hwa Ya 1st Rd., Hwa Ya Technology Park, Kwei-Shan District, Tao Yuan City, Taiwan, R.O.C. Name
: Kevin Liang Job Title
: Vice Manager e-mail
: KevinLiang@sporton.com.tw We further certifies that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002(b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 835(a). This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. Applicant Address Signature
: ARRIS Group, Inc.
: 3871 Lakefield Drive Suite 300 SUWANEE Georgia 30024 United States
:
Name and Job Title.
: Antonio A Figueiredo, Regulatory/Compliance _________________________________ E-mail Tel.
: tony.figueiredo@arris.com
: 678-473-5067 3871 Lakefield Drive Suwanee, GA 30024 phone: 678-473-8400 www.arris.com
1 2 | Test Report DTS | Test Report | 1.47 MiB | March 02 2016 |
FCC Test Report Report No. : FR5D2512AC FCC Test Report Equipment Brand Name Model No. FCC ID Standard Operating Band Equipment Class Applicant Manufacturer
: Wireless Cable Modem Gateways
: ARRIS
: SBG6580-2
: UIDSBG6580-2
: 47 CFR FCC Part 15.247
: 2400 MHz 2483.5 MHz
: DTS
: ARRIS GROUP INC 3871 LAKEFIELD DRIVE, SUWANEE, GA 30024, United States The product sample received on Dec. 28, 2015 and completely tested on Jan. 12, 2016. We, SPORTON, would like to declare that the tested sample has been evaluated in accordance with the procedures given in ANSI C63.10-2013 and shown compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC., the test report shall not be reproduced except in full. Reviewed by:
Kevin Liang / Assistant Manager SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 1 of 55
: Rev. 01 FCC Test Report Report No. : FR5D2512AC Table of Contents GENERAL DESCRIPTION .................................................................................................................... 5 Information.............................................................................................................................................. 5 Accessories and Support Equipment ..................................................................................................... 7 Testing Applied Standards ..................................................................................................................... 7 Testing Location Information .................................................................................................................. 7 Measurement Uncertainty ...................................................................................................................... 8 TEST CONFIGURATION OF EUT ........................................................................................................ 9 The Worst Case Modulation Configuration ............................................................................................ 9 The Worst Case Power Setting Parameter ............................................................................................ 9 The Worst Case Measurement Configuration ...................................................................................... 10 Test Setup Diagram ............................................................................................................................. 11 TRANSMITTER TEST RESULT .......................................................................................................... 12 AC Power-line Conducted Emissions .................................................................................................. 12 6dB Bandwidth ..................................................................................................................................... 15 RF Output Power .................................................................................................................................. 17 Power Spectral Density ........................................................................................................................ 21 Transmitter Radiated Bandedge Emissions ......................................................................................... 23 Transmitter Radiated Unwanted Emissions ......................................................................................... 26 TEST EQUIPMENT AND CALIBRATION DATA ................................................................................ 55 1 1.1 1.2 1.3 1.4 1.5 2 2.1 2.2 2.3 2.4 3 3.1 3.2 3.3 3.4 3.5 3.6 4 APPENDIX A. TEST PHOTOS APPENDIX B. PHOTOGRAPHS OF EUT SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 2 of 55
: Rev. 01 FCC Test Report Report No. : FR5D2512AC Summary of Test Result Conformance Test Specifications Report Clause 1.1.2 Ref. Std. Clause 15.203 Antenna Requirement Description 3.1 15.207 AC Power-line Conducted Emissions 3.2 15.247(a) 6dB Bandwidth 3.3 3.4 3.5 15.247(b) RF Output Power
(Maximum Peak Conducted Output Power) 15.247(d) Power Spectral Density 15.247(c) Transmitter Radiated Bandedge Emissions 3.6 15.247(c) Transmitter Radiated Unwanted Emissions Measured Limit Result Antenna connector mechanism complied
[dBuV]: 0.3235190MHz 39.32 (Margin 20.30dB) - QP 37.62 (Margin 12.00dB) - AV 6dB Bandwidth Unit [MHz]
20M:6.99 / 40M:35.92 Power [dBm]:28.95 FCC 15.203 FCC 15.207 Complied Complied 500kHz Complied Power [dBm]:30 Complied PSD [dBm/100kHz]: -7.54 Non-Restricted Bands:
2399.496MHz: 30.50dB Restricted Bands
[dBuV/m at 3m]:
2483.600MHz 69.51 (Margin 4.49dB) - PK 52.81 (Margin 1.19dB) - AV Restricted Bands
[dBuV/m at 3m]:
7311.000MHz 52.81 (Margin 1.19dB) - AV 58.54 (Margin 15.46dB) - PK PSD [dBm/3kHz]:8 Complied Non-Restricted Complied Bands: > 20 dBc Restricted Bands:
FCC 15.209 Complied Non-Restricted Bands: > 20 dBc Restricted Bands:
FCC 15.209 SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 3 of 55
: Rev. 01 FCC Test Report Report No. : FR5D2512AC Revision History Report No. FR5D2512AC Version Rev. 01 Description Initial issue of report Issued Date Jan. 26, 2016 2500-2690 SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 4 of 55
: Rev. 01 FCC Test Report General Description Information 1 1.1 1.1.1 RF General Information Report No. : FR5D2512AC Transmit Chains (NTX) RF Output Power (dBm) Frequency Range (MHz) 2400-2483.5 2400-2483.5 2400-2483.5 2400-2483.5 IEEE Std. 802.11 Ch. Freq. (MHz) RF General Information Channel Number 1-11 [11]
1-11 [11]
1-11 [11]
3-9 [7]
b g 2412-2462 2412-2462 2412-2462 2422-2452 1 2 2 2 Note 1: RF output power specifies that Maximum Peak Conducted Output Power. Note 2: 802.11b uses a combination of DSSS-DBPSK, DQPSK, CCK modulation. Note 3: 802.11g/n uses a combination of OFDM-BPSK, QPSK, 16QAM, 64QAM modulation. 1.1.2 Antenna Information n (HT20) n (HT40) 22.550 26.535 26.164 20.529 Integral antenna (antenna permanently attached) Antenna Category Temporary RF connector provided No temporary RF connector provided Transmit chains bypass antenna and soldered temporary RF connector provided for connected measurement. In case of conducted measurements the transmitter shall be connected to the measuring equipment via a suitable attenuator and correct for all losses in the RF path. No. Ant. Cat. Ant. Type Gain (dBi) Antenna General Information 1 2 Integral Integral Dipole Dipole Remark:
1. This EUT supports 1TX and Port 1 for emission in modulation mode 11b. 2. This EUT supports 2TX in modulation mode 11g, 11n. 2.89 2.86 2.87 1.88 1.1 1.49 SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 5 of 55
: Rev. 01 FCC Test Report 1.1.3 Type of EUT Report No. : FR5D2512AC EUT Serial Number Presentation of Equipment Identify EUT N/A Production ;
Pre-Production ;
Prototype Type of EUT Stand-alone Combined (EUT where the radio part is fully integrated within another device) Combined Equipment - Brand Name / Model No.:
Plug-in radio (EUT intended for a variety of host systems) Host System - Brand Name / Model No.:
Other:
1.1.4 Test Signal Duty Cycle Operated Mode for Worst Duty Cycle Operated normally mode for worst duty cycle Operated test mode for worst duty cycle Test Signal Duty Cycle (x) 100.00% - IEEE 802.11b 100.00%- IEEE 802.11g 100.00%- IEEE 802.11n (HT20) 100.00%- IEEE 802.11n (HT40) Note 1: RF Output Power Plots w/o Duty Factor 1.1.5 EUT Operational Condition Supply Voltage Type of DC Source AC mains From adapter Power Duty Factor
[dB] (10 log 1/x) 0.00 0.00 0.00 0.00 DC From PoE From Battery SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 6 of 55
: Rev. 01 FCC Test Report 1.2 Accessories and Support Equipment Accessories Information Report No. : FR5D2512AC PoE Adapter Brand Name Power Rating APD I/P: 100-240Vac, 0.5A ; O/P: 12Vdc, 1.5A Model Name WB-18D12FU Note: Regarding to more detail and other information, please refer to user manual. Support Equipment - RF Conducted No. 1 2 Equipment Notebook Adapter for Notebook Brand Name DELL DELL Model Name E6400 HA65NM130 FCC ID DoC DoC 1.3 Testing Applied Standards According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards:
1.4 Testing Location Information 47 CFR FCC Part 15 ANSI C63.10-2013 FCC KDB 558074 D01 v03r03 FCC KDB 662911 D01v02r01 HWA YA ADD
: No. 52, Hwa Ya 1st Rd., Hwa Ya Technology Park, Kwei-Shan District, Tao Yuan City, Taiwan, R.O.C. TEL
: 886-3-327-3456 FAX : 886-3-327-0973 Testing Location Test Condition AC Conduction RF Conducted Radiated Emission Test Site Registration Number: 636805 Test Site No. Test Engineer CO04-HY TH01-HY 03CH03-HY Anthony Ryan Joe Test Environment 22C / 58%
22C / 65%
24.5C / 52%
SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 7 of 55
: Rev. 01 FCC Test Report Report No. : FR5D2512AC 1.5 Measurement Uncertainty ISO/IEC 17025 requires that an estimate of the measurement uncertainties associated with the emissions test results be included in the report. The measurement uncertainties given below are based on a 95% confidence level (based on a coverage factor (k=2) Measurement Uncertainty Test Item Uncertainty AC power-line conducted emissions Emission bandwidth, 6dB bandwidth RF output power, conducted Power density, conducted Unwanted emissions, conducted All emissions, radiated Temperature Humidity DC and low frequency voltages Time Duty Cycle 9 150 kHz 0.15 30 MHz 30 1000 MHz 1 18 GHz 18 40 GHz 40 200 GHz 9 150 kHz 0.15 30 MHz 30 1000 MHz 1 18 GHz 18 40 GHz 40 200 GHz 2.3 dB 0.6 %
0.1 dB 0.6 dB 0.4 dB 0.4 dB 0.6 dB 0.5 dB 0.5 dB N/A 2.5 dB 2.3 dB 2.6 dB 3.6 dB 3.8 dB N/A 0.8 C 5 %
0.9%
1.4 %
0.6 %
SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 8 of 55
: Rev. 01 FCC Test Report Report No. : FR5D2512AC Test Configuration of EUT 2 2.1 The Worst Case Modulation Configuration Modulation Mode Worst Modulation Used for Conformance Testing Transmit Chains (NTX) Data Rate / MCS Worst Data Rate / MCS 11b 11g HT20 HT40 1 2 2 2 1-11 Mbps 6-54 Mbps MCS 0-15 MCS 0-15 1 Mbps 6 Mbps MCS 0 MCS 0 Note 1: IEEE Std. 802.11n modulation consists of HT20 and HT40 (HT: High Throughput). The EUT support HT20 and HT40. Worst modulation mode of Guard Interval (GI) is 800ns. Note 2: Modulation modes consist below configuration:
11b: IEEE 802.11b, 11g: IEEE 802.11g, HT20/HT40: IEEE 802.11n Note 3: RF output power specifies that Maximum Peak Conducted Output Power. 2.2 The Worst Case Power Setting Parameter The Worst Case Power Setting Parameter (2400-2483.5MHz band) Test Software Version MTool_ 2.0.1.1 Test Frequency (MHz) Modulation Mode NTX NCB: 20MHz 11b 11g HT20 HT40 2412 73 61 61
-
1 2 2 2 2437 77 78 76
-
2462 72 62 56
-
NCB: 40MHz 2422 2437 2452
-
-
-
50
-
-
-
52
-
-
-
48 SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 9 of 55
: Rev. 01 FCC Test Report 2.3 The Worst Case Measurement Configuration Report No. : FR5D2512AC The Worst Case Mode for Following Conformance Tests Tests Item Condition Operating Mode 1 AC power-line conducted emissions AC power-line conducted measurement for line and neutral Test Voltage: 120Vac / 60Hz Operating Mode Description Adapter Mode Operating mode 1 was the worst case and it is recorded in this test report. The Worst Case Mode for Following Conformance Tests Tests Item Test Condition Modulation Mode RF Output Power, Power Spectral Density, 6 dB Bandwidth Conducted measurement at transmit chains 11b, 11g, HT20, HT40 The Worst Case Mode for Following Conformance Tests Tests Item Test Condition Transmitter Radiated Unwanted Emissions Transmitter Radiated Bandedge Emissions Radiated measurement User Position EUT will be placed in fixed position. EUT will be placed in mobile position and operating multiple positions. EUT shall be performed three orthogonal planes. EUT will be a hand-held or body-worn battery-powered devices and operating multiple positions. EUT shall be performed two or three orthogonal planes. Operating Mode <1GHz Operating Mode Description 1 Adapter Mode Operating mode 1 was the worst case and it is recorded in this test report. Operating Mode >1GHz Operating Mode Description 1 Modulation Mode Adapter Mode 11b, 11g, HT20, HT40 Orthogonal Planes of EUT Worst Planes of EUT Z Plane V SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 10 of 55
: Rev. 01 FCC Test Report 2.4 Test Setup Diagram Report No. : FR5D2512AC Test Setup Diagram AC Line Conducted Emission Test Test Setup Diagram - Radiated Emission Test SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 11 of 55
: Rev. 01 FCC Test Report Report No. : FR5D2512AC Transmitter Test Result 3 3.1 AC Power-line Conducted Emissions 3.1.1 AC Power-line Conducted Emissions Limit AC Power-line Conducted Emissions Limit Frequency Emission (MHz) 0.15-0.5 Quasi-Peak 66 - 56 *
0.5-5 5-30 56 60 Note 1: * Decreases with the logarithm of the frequency. 3.1.2 Measuring Instruments Refer a test equipment and calibration data table in this test report. 3.1.3 Test Procedures Test Method Refer as ANSI C63.10-2013, clause 6.2 for AC power-line conducted emissions. 3.1.4 Test Setup AC Power-line Conducted Emissions Average 56 - 46 *
46 50 SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 12 of 55
: Rev. 01 FCC Test Report 3.1.5 Test Result of AC Power-line Conducted Emissions Report No. : FR5D2512AC AC Power-line Conducted Emissions Result Operating Mode Operating Function 1 Adapter Mode Power Phase Neutral Note 1: >20dB means emission levels that exceed the level of 20 dB below the applicable limit. Note 2: N/F means Nothing Found emissions (No emissions were detected.) SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 13 of 55
: Rev. 01 FCC Test Report Report No. : FR5D2512AC AC Power-line Conducted Emissions Result Operating Mode Operating Function 1 Adapter Mode Power Phase Line Note 1: >20dB means emission levels that exceed the level of 20 dB below the applicable limit. Note 2: N/F means Nothing Found emissions (No emissions were detected.) SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 14 of 55
: Rev. 01 Report No. : FR5D2512AC FCC Test Report 3.2 3.2.1 6dB Bandwidth Limit 6dB Bandwidth 6dB Bandwidth Limit Systems using digital modulation techniques:
6 dB bandwidth 500 kHz. 3.2.2 Measuring Instruments Refer a test equipment and calibration data table in this test report. 3.2.3 Test Procedures Test Method For the emission bandwidth shall be measured using one of the options below:
Refer as FCC KDB 558074 , clause 8.1 Option 1 for 6 dB bandwidth measurement. Refer as FCC KDB 558074 , clause 8.2 Option 2 for 6 dB bandwidth measurement. Refer as ANSI C63.10, clause 6.9.1 for occupied bandwidth testing. For conducted measurement. The EUT supports single transmit chain and measurements performed on this transmit chain 1. The EUT supports diversity transmitting and the results on transmit chain port 1 is the worst case. The EUT supports multiple transmit chains using options given below:
Option 1: Multiple transmit chains measurements need to be performed on one of the active transmit chains (antenna outputs). All measurement had be performed on transmit chains 1. Option 2: Multiple transmit chains measurements need to be performed on each transmit chains individually (antenna outputs). All measurement had be performed on all transmit chains. 3.2.4 Test Setup Emission Bandwidth SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 15 of 55
: Rev. 01 FCC Test Report 3.2.5 Test Result of Emission Bandwidth Report No. : FR5D2512AC Condition Modulation Mode NTX 11b 11b 11b 11g 11g 11g HT20 HT20 HT20 HT40 HT40 HT40 1 1 1 2 2 2 2 2 2 2 2 2 Freq.
(MHz) 2412 2437 2462 2412 2437 2462 2412 2437 2462 2422 2437 2452 Emission Bandwidth Result Emission Bandwidth (MHz) 99% Bandwidth 6dB Bandwidth Chain Port 1 Chain Port 2 Chain Port 1 Chain Port 2 10.13 10.37 10.11 16.32 16.38 16.34 17.49 17.52 17.46 36.22 36.26 36.22
-
-
-
16.31 16.32 16.32 17.48 17.48 17.48 36.26 36.26 36.22 8.08 8.05 6.99 16.33 16.30 16.29 17.55 17.56 17.53 36.04 36.36 35.92
-
-
-
16.32 15.42 16.05 17.53 17.55 17.56 36.36 36.28 36.32 Limit Result N/A 500 kHz Complied Note 1: NTX = Number of Transmit Chains Minimum Emission Bandwidth Plots (6dB) SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 16 of 55
: Rev. 01 FCC Test Report 3.3 RF Output Power 3.3.1 RF Output Power Limit Report No. : FR5D2512AC Maximum Peak Conducted Output Power or Maximum Conducted Output Power Limit 2400-2483.5 MHz Band:
RF Output Power Limit If GTX 6 dBi, then POut 30 dBm (1 W) Point-to-multipoint systems (P2M): If GTX > 6 dBi, then POut = 30 (GTX 6) dBm Point-to-point systems (P2P): If GTX > 6 dBi, then POut = 30 (GTX 6)/3 dBm Smart antenna system (SAS):
Single beam: If GTX > 6 dBi, then POut = 30 (GTX 6)/3 dBm Overlap beam: If GTX > 6 dBi, then POut = 30 (GTX 6)/3 dBm Aggregate power on all beams: If GTX > 6 dBi, then POut = 30 (GTX 6)/3 + 8dB dBm e.i.r.p. Power Limit:
2400-2483.5 MHz Band Point-to-multipoint systems (P2M): Peirp 36 dBm (4 W) Point-to-point systems (P2P): Peirp MAX(36, [POut + GTX]) dBm Smart antenna system (SAS) POut = maximum peak conducted output power or maximum conducted output power in dBm, GTX = the maximum transmitting antenna directional gain in dBi. Peirp = e.i.r.p. Power in dBm. Single beam: Peirp MAX(36, POut + GTX) dBm Overlap beam: Peirp MAX(36, POut + GTX) dBm Aggregate power on all beams: Peirp MAX(36, [POut + GTX + 8]) dBm 3.3.2 Measuring Instruments Refer a test equipment and calibration data table in this test report. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 17 of 55
: Rev. 01 FCC Test Report 3.3.3 Test Procedures Report No. : FR5D2512AC Maximum Peak Conducted Output Power Test Method Refer as FCC KDB 558074 , clause 9.1.1 (RBW EBW method). Refer as FCC KDB 558074 , clause 9.1.2 (peak power meter for VBW DTS BW). Maximum Conducted Output Power
[duty cycle 98% or external video / power trigger]
Refer as FCC KDB 558074 , clause 9.2.2.2 Method AVGSA-1 (spectral trace averaging). Refer as FCC KDB 558074 , clause 9.2.2.3 Method AVGSA-1 Alt. (slow sweep speed) duty cycle < 98% and average over on/off periods with duty factor Refer as FCC KDB 558074 , clause 9.2.2.4 Method AVGSA-2 (spectral trace averaging). Refer as FCC KDB 558074 , clause 9.2.2.5 Method AVGSA-2 Alt. (slow sweep speed) RF power meter and average over on/off periods with duty factor or gated trigger Refer as FCC KDB 558074 , clause 9.2.3 Method AVGPM (using an RF average power meter). For conducted measurement. The EUT supports single transmit chain and measurements performance on this transmit chain port 1. The EUT supports diversity transmitting and the results on transmit chain port 1 is the worst case. The EUT supports multiple transmit chains using options given below:
Refer as FCC KDB 662911, In-band power measurements. Using the measure-and-sum approach, measured all transmit ports individually. Sum the power (in linear power units e.g., mW) of all ports for each individual sample and save them. If multiple transmit chains, EIRP calculation could be following as methods:
Ptotal = P1 + P2 + + Pn
(calculated in linear unit [mW] and transfer to log unit [dBm]) EIRPtotal = Ptotal + DG 3.3.4 Test Setup RF Output Power (Spectrum Analyzer) SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 18 of 55
: Rev. 01 FCC Test Report 3.3.5 Directional Gain for Power Measurement Report No. : FR5D2512AC Directional Gain (DG) Result Transmit Chains No. Maximum GANT (dBi) Modulation Mode DG (dBi) 1 2.89 NTX 2 1.88
-
-
NSS (Min.) STBC
-
-
Array Gain
(dB) 0 2.89 5.42 5.42 5.42 11b 11g HT20 HT40 1 2 2 2 1 1 1 1 3.01 (Note3) 3.01 (Note3) 3.01 (Note3) Note 1: For all transmitter outputs with equal antenna gains, directional gain is to be computed as follows:
Any transmit signals are correlated, Directional Gain = GANT + 10 log(NTX) All transmit signals are completely uncorrelated, Directional Gain = GANT Note 2: For all transmitter outputs with unequal antenna gains, directional gain is to be computed as follows:
Any transmit signals are correlated, Directional Gain =10 log[(10G1/20 + + 10GN/20)2 /NTX]
All transmit signals are completely uncorrelated, Directional Gain = 10 log[(10G1/10 + + 10GN/10)/NTX]
where Nss = the number of independent spatial streams data. Note 3: For Spatial Multiplexing, Directional Gain (DG) = GANT + 10 log(NTX/NSS), Note 4: For CDD transmissions, directional gain is calculated as power measurements:
-
-
-
-
Directional Gain (DG) = GANT + Array Gain, where Array Gain is as follows:
Array Gain = 0 dB (i.e., no array gain) for NTX 4;
Array Gain = 0 dB (i.e., no array gain) for channel widths 40 MHz for any NTX;
SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 19 of 55
: Rev. 01 FCC Test Report Report No. : FR5D2512AC 3.3.6 Test Result of Maximum Peak Conducted Output Power Condition Modulation Mode NTX 11b 11b 11b 11g 11g 11g HT20 HT20 HT20 HT40 HT40 HT40 1 1 1 2 2 2 2 2 2 2 2 2 Result Maximum Peak Conducted Output Power Result RF Output Power (dBm) Freq.
(MHz) 2412 2437 2462 2412 2437 2462 2412 2437 2462 2422 2437 2452 Chain Port 1 21.46 22.55 20.70 19.07 23.49 19.51 19.64 23.32 18.37 16.42 17.24 16.22 Chain Port 2
-
-
-
18.99 23.56 19.60 19.84 22.98 18.04 17.05 17.78 16.77 Sum Chain 21.46 22.55 20.70 22.04 26.54 22.57 22.75 26.16 21.22 19.76 20.53 19.51 Power Limit 30.00 30.00 30.00 30.00 30.00 30.00 30.00 30.00 30.00 30.00 30.00 30.00 Complied DG (dBi) 2.89 2.89 2.89 2.41 2.41 2.41 2.41 2.41 2.41 2.41 2.41 2.41 EIRP Power 24.35 25.44 23.59 24.45 28.95 24.98 25.17 28.58 23.63 22.17 22.94 21.93 EIRP Limit 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 3.3.7 Test Result of Maximum Average Conducted Output Power Maximum Conducted Output Power Result RF Output Power (dBm) Condition Modulation Mode NTX 11b 11b 11b 11g 11g 11g HT20 HT20 HT20 HT40 HT40 HT40 1 1 1 2 2 2 2 2 2 2 2 2 Freq.
(MHz) 2412 2437 2462 2412 2437 2462 2412 2437 2462 2422 2437 2452 Chain Port 1 18.22 19.83 17.73 14.09 18.49 14.55 14.53 18.23 13.29 11.37 12.24 11.20 Chain Port 2
-
-
-
14.11 18.52 14.43 14.26 17.82 12.98 11.94 12.64 11.67 Result SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Sum Chain 18.22 19.83 17.73 17.11 21.52 17.50 17.41 21.04 16.15 14.67 15.45 14.45 Power Limit 30.00 30.00 30.00 30.00 30.00 30.00 30.00 30.00 30.00 30.00 30.00 30.00 Complied DG (dBi) 2.89 2.89 2.89 2.41 2.41 2.41 2.41 2.41 2.41 2.41 2.41 2.41 EIRP Power 21.11 22.72 20.62 19.52 23.93 19.92 19.82 23.45 18.56 17.09 17.87 16.87 EIRP Limit 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 Page No. Report Version
: 20 of 55
: Rev. 01 Report No. : FR5D2512AC FCC Test Report 3.4 Power Spectral Density 3.4.1 Power Spectral Density Limit Power Spectral Density Limit Power Spectral Density (PSD) 8 dBm/3kHz 3.4.2 Measuring Instruments Refer a test equipment and calibration data table in this test report. 3.4.3 Test Procedures Test Method Peak power spectral density procedures that the same method as used to determine the conducted output power. If maximum peak conducted output power was measured to demonstrate compliance to the output power limit, then the peak PSD procedure below (Method PKPSD) shall be used. If maximum conducted output power was measured to demonstrate compliance to the output power limit, then one of the average PSD procedures shall be used, as applicable based on the following criteria (the peak PSD procedure is also an acceptable option). Refer as FCC KDB 558074 , clause 10.2 Method PKPSD (RBW=3-100kHz;detector=peak).
[duty cycle 98% or external video / power trigger]
Refer as FCC KDB 558074 , clause 10.3 Method AVGPSD-1 (spectral trace averaging). Refer as FCC KDB 558074 , clause 10.4 Method AVGPSD-1 Alt. (slow sweep speed) duty cycle < 98% and average over on/off periods with duty factor Refer as FCC KDB 558074 , clause 10.5 Method AVGPSD-2 (spectral trace averaging). Refer as FCC KDB 558074 , clause 10.6 Method AVGPSD-2 Alt. (slow sweep speed) For conducted measurement. The EUT supports single transmit chain and measurements performed on this transmit chain port 1. The EUT supports diversity transmitting and the results on transmit chain port 1 is the worst case. The EUT supports multiple transmit chains using options given below:
Option 1: Measure and sum the spectra across the outputs. Refer as FCC KDB 662911, In-band power spectral density (PSD). Sample all transmit ports simultaneously using a spectrum analyzer for each transmit port. Where the trace bin-by-bin of each transmit port summing can be performed. (i.e., in the first spectral bin of output 1 is summed with that in the first spectral bin of output 2 and that from the first spectral bin of output 3, and so on up to the NTX output to obtain the value for the first frequency bin of the summed spectrum.). Add up the amplitude (power) values for the different transmit chains and use this as the new data trace. Option 2: Measure and add 10 log(N) dB, where N is the number of transmit chains. Refer as FCC KDB 662911, In-band power spectral density (PSD). Performed at each transmit chains and each transmit chains shall be compared with the limit have been reduced with 10 log(N). Or each transmit chains shall be add 10 log(N) to compared with the limit. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 21 of 55
: Rev. 01 FCC Test Report 3.4.4 Test Setup Power Spectral Density Report No. : FR5D2512AC 3.4.5 Test Result of Power Spectral Density Condition Modulation Mode NTX 11b 11b 11b 11g 11g 11g HT20 HT20 HT20 HT40 HT40 HT40 1 1 1 2 2 2 2 2 2 2 2 2 Freq.
(MHz) 2412 2437 2462 2412 2437 2462 2412 2437 2462 2422 2437 2452 Power Spectral Density Result Power Spectral Density Sum Chain
(dBm/100kHz) PSD Limit
(dBm/3kHz)
-10.20
-7.54
-10.47
-11.94
-8.76
-13.07
-12.47
-9.66
-14.34
-17.14
-16.31
-19.12 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 Result Complied Worst Power Spectral Density Plots SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 22 of 55
: Rev. 01 FCC Test Report 3.5 Transmitter Radiated Bandedge Emissions 3.5.1 Transmitter Radiated Bandedge Emissions Limit Report No. : FR5D2512AC Transmitter Radiated Bandedge Emissions Limit 3.5.2 Measuring Instruments Refer a test equipment and calibration data table in this test report. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 23 of 55
: Rev. 01 FCC Test Report 3.5.3 Test Procedures Report No. : FR5D2512AC Test Method The average emission levels shall be measured in [duty cycle 98 or duty factor]. Refer as ANSI C63.10, clause 6.10 bandedge testing shall be performed at the lowest frequency channel and highest frequency channel within the allowed operating band. For the transmitter unwanted emissions shall be measured using following options below:
Refer as FCC KDB 558074 , clause 11 for unwanted emissions into non-restricted bands. Refer as FCC KDB 558074 , clause 12 for unwanted emissions into restricted bands. Refer as FCC KDB 558074 , clause 12.2.5.1 Option 1 (trace averaging for duty cycle 98%) Refer as FCC KDB 558074 , clause 12.2.5.2 Option 2 (trace averaging + duty factor). Refer as FCC KDB 558074 , clause 12.2.5.3 Option 3 (Reduced VBW1/T). Refer as ANSI C63.10, clause 4.1.4.2.3 (Reduced VBW). VBW 1/T, where T is pulse time. Refer as ANSI C63.10, clause 4.1.4.2.4 average value of pulsed emissions. Refer as FCC KDB 558074 , clause 11.3 and 12.2.4 measurement procedure peak limit. For the transmitter bandedge emissions shall be measured using following options below:
Refer as FCC KDB 558074 , clause 13.3 for narrower resolution bandwidth (100kHz) using the band power and summing the spectral levels (i.e., 1 MHz). Refer as ANSI C63.10, clause 6.10 for band-edge testing. Refer as ANSI C63.10, clause 6.10.6.2 for marker-delta method for band-edge measurements. For radiated measurement, refer as FCC KDB 558074 , clause 12.2.7 and ANSI C63.10, clause 6.6. Test distance is 3m. 3.5.4 Test Setup Transmitter Radiated Bandedge Emissions Electric field tests shall be performed in transmitter bandedge emissions using a calibrated horn antenna. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 24 of 55
: Rev. 01 H H H H H H H H Pol. H H H H H H H H 3.5.5 FCC Test Report Report No. : FR5D2512AC Test Result of Transmitter Radiated Bandedge Emissions 2400-2483.5MHz Transmitter Radiated Bandedge Emissions (Non-restricted Band) In-band PSD
[i]
(dBuV/100kHz) Freq. (MHz) Out-band PSD [o]
(dBuV/100kHz)
[i] [o] (dB) Limit (dB) Pol. Modulation NTX 11b 11b 11g 11g HT20 HT20 HT40 HT40 1 1 2 2 2 2 2 2 Test Freq.
(MHz) 2412 2462 2412 2462 2412 2462 2422 2452 105.27 105.15 100.53 99.20 100.14 100.25 96.61 94.44 2399.152 2527.200 2399.824 2540.600 2398.928 2515.280 2399.496 2500.640 67.63 60.25 64.38 60.65 64.55 60.16 66.11 60.40 37.64 44.90 36.15 38.55 35.59 40.09 30.50 34.04 20 20 20 20 20 20 20 20 2400-2483.5MHz Transmitter Radiated Bandedge Emissions (Restricted Band) Level Limit Level
(dBuV/m)
(dBuV/m) Limit
(dBuV/m)
(dBuV/m) Measure Distance Freq.
(MHz) PK Note 1: Measurement worst emissions of receive antenna polarization Modulation Mode NTX Freq.
(MHz) PK 60.97 61.44 72.65 70.78 71.37 70.32 70.47 69.51 Note 1: Measurement worst emissions of receive antenna polarization. 2389.968 2484.000 2389.744 2483.600 2389.296 2483.840 2389.464 2483.600 11b 11b 11g 11g HT20 HT20 HT40 HT40 2412 2462 2412 2462 2412 2462 2422 2452
(m) 3 3 3 3 3 3 3 3 1 1 2 2 2 2 2 2 Freq.
(MHz) AV 2387.280 2484.000 2389.744 2483.600 2389.296 2483.500 2384.448 2491.040 AV 51.55 51.40 52.01 52.74 52.58 52.16 52.75 52.81 PK 74 74 74 74 74 74 74 74 AV 54 54 54 54 54 54 54 54 SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 25 of 55
: Rev. 01 FCC Test Report 3.6 Transmitter Radiated Unwanted Emissions 3.6.1 Transmitter Radiated Unwanted Emissions Limit Restricted Band Emissions Limit Report No. : FR5D2512AC Frequency Range (MHz) Field Strength (uV/m) Field Strength (dBuV/m) Measure Distance (m) 0.009~0.490 0.490~1.705 1.705~30.0 30~88 88~216 216~960 Above 960 2400/F(kHz) 24000/F(kHz) 48.5 - 13.8 33.8 - 23 30 100 150 200 500 29 40 43.5 46 54 300 30 30 3 3 3 3 Note 1: Test distance for frequencies at or above 30 MHz, measurements may be performed at a distance other than the limit distance provided they are not performed in the near field and the emissions to be measured can be detected by the measurement equipment. When performing measurements at a distance other than that specified, the results shall be extrapolated to the specified distance using an extrapolation factor of 20 dB/decade (inverse of linear distance for field-strength measurements, inverse of linear distance-squared for power-density measurements). Note 2: Test distance for frequencies at below 30 MHz, measurements may be performed at a distance closer than the EUT limit distance; however, an attempt should be made to avoid making measurements in the near field. When performing measurements below 30 MHz at a closer distance than the limit distance, the results shall be extrapolated to the specified distance by either making measurements at a minimum of two or more distances on at least one radial to determine the proper extrapolation factor or by using the square of an inverse linear distance extrapolation factor (40 dB/decade). The test report shall specify the extrapolation method used to determine compliance of the EUT. Un-restricted Band Emissions Limit RF output power procedure Peak output power procedure Average output power procedure Limit (dB) 20 30 Note 1: If the peak output power procedure is used to measure the fundamental emission power to demonstrate compliance to requirements, then the peak conducted output power measured within any 100 kHz outside the authorized frequency band shall be attenuated by at least 20 dB relative to the maximum measured in-band peak PSD level. Note 2: If the average output power procedure is used to measure the fundamental emission power to demonstrate compliance to requirements, then the power in any 100 kHz outside of the authorized frequency band shall be attenuated by at least 30 dB relative to the maximum measured in-band average PSD level. 3.6.2 Measuring Instruments Refer a test equipment and calibration data table in this test report. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 26 of 55
: Rev. 01 FCC Test Report 3.6.3 Test Procedures Report No. : FR5D2512AC Test Method Measurements may be performed at a distance other than the limit distance provided they are not performed in the near field and the emissions to be measured can be detected by the measurement equipment. When performing measurements at a distance other than that specified, the results shall be extrapolated to the specified distance using an extrapolation factor of 20 dB/decade (inverse of linear distance for field-strength measurements, inverse of linear distance-squared for power-density measurements). The average emission levels shall be measured in [duty cycle 98 or duty factor]. For the transmitter unwanted emissions shall be measured using following options below:
Refer as FCC KDB 558074 , clause 11 for unwanted emissions into non-restricted bands. Refer as FCC KDB 558074 , clause 12 for unwanted emissions into restricted bands. Refer as FCC KDB 558074 , clause 12.2.5.1 Option 1 (trace averaging for duty cycle 98%) Refer as FCC KDB 558074 , clause 12.2.5.2 Option 2 (trace averaging + duty factor). Refer as FCC KDB 558074 , clause 12.2.5.3 Option 3 (Reduced VBW1/T). Refer as ANSI C63.10, clause 4.1.4.2.3 (Reduced VBW). VBW 1/T, where T is pulse time. Refer as ANSI C63.10, clause 4.1.4.2.4 average value of pulsed emissions. Refer as FCC KDB 558074 , clause 11.3 and 12.2.4 measurement procedure peak limit. Refer as FCC KDB 558074 , clause 12.2.3 measurement procedure Quasi-Peak limit. For radiated measurement, refer as FCC KDB 558074 , clause 12.2.7. Refer as ANSI C63.10, clause 6.4 for radiated emissions below 30 MHz and test distance is 3m. Refer as ANSI C63.10, clause 6.5 for radiated emissions 30 MHz to 1 GHz and test distance is 3m. Refer as ANSI C63.10, clause 6.6 for radiated emissions above 1 GHz and test distance is 3m. The any unwanted emissions level shall not exceed the fundamental emission level. All amplitude of spurious emissions that are attenuated by more than 20 dB below the permissible value has no need to be reported. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 27 of 55
: Rev. 01 FCC Test Report 3.6.4 Test Setup Report No. : FR5D2512AC Transmitter Radiated Unwanted Emissions (below 1GHz) Magnetic field tests shall be performed in the frequency range of 9 kHz to 30 MHz using a calibrated loop antenna. Electric field tests shall be performed in the frequency range of 30 MHz to 1000 MHz using a calibrated bi-log antenna. Transmitter Radiated Unwanted Emissions (Above 1GHz) Electric field tests shall be performed in the frequency range of 1 GHz to 10th harmonic of highest fundamental frequency or 40 GHz using a calibrated horn antenna. 3.6.5 Transmitter Radiated Unwanted Emissions (Below 30MHz) All amplitude of spurious emissions that are attenuated by more than 20 dB below the permissible value has no need to be reported. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 28 of 55
: Rev. 01 FCC Test Report Report No. : FR5D2512AC 3.6.6 Transmitter Radiated Unwanted Emissions (Below 1GHz) Operating Mode Operating Function Transmitter Radiated Unwanted Emissions (Below 1GHz) V Polarization 1 Adapter Mode Note 1: >20dB means spurious emission levels that exceed the level of 20 dB below the applicable limit. Note 2: N/F means Nothing Found spurious emissions (No spurious emissions were detected.) Note 3: Measurement receive antenna polarization: H (Horizontal), V (Vertical) SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 29 of 55
: Rev. 01 FCC Test Report Report No. : FR5D2512AC Operating Mode Operating Function Transmitter Radiated Unwanted Emissions (Below 1GHz) H Polarization 1 Adapter Mode Note 1: >20dB means spurious emission levels that exceed the level of 20 dB below the applicable limit. Note 2: N/F means Nothing Found spurious emissions (No spurious emissions were detected.) Note 3: Measurement receive antenna polarization: H (Horizontal), V (Vertical) SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 30 of 55
: Rev. 01 FCC Test Report Report No. : FR5D2512AC 3.6.7 Transmitter Radiated Unwanted Emissions (Above 1GHz) Transmitter Radiated Unwanted Emissions (Above 1GHz) Modulation Mode NTX 11b 1 Test Freq. (MHz) Polarization 2412 V Note 1: >20dB means spurious emission levels that exceed the level of 20 dB below the applicable limit. Note 2: N/F means Nothing Found spurious emissions (No spurious emissions were detected.) Note 3: Measurement receive antenna polarization: H (Horizontal), V (Vertical) Note 4: For restricted bands, the peak measurement is fully sufficient, as the max field strength as measured with the Peak-Detector meets the AV-Limit so that the AV level does not need to be reported in addition. Note 5: For un-restricted bands, unwanted emissions shall be attenuated by at least 20 dB relative to the maximum measured in-band level (107.85 dBuV/m). Note 6: No level of unwanted emissions exceeds the level of the fundamental emission. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 31 of 55
: Rev. 01 FCC Test Report Report No. : FR5D2512AC Transmitter Radiated Unwanted Emissions (Above 1GHz) Modulation Mode NTX 11b 1 Test Freq. (MHz) Polarization 2412 H Note 1: >20dB means spurious emission levels that exceed the level of 20 dB below the applicable limit. Note 2: N/F means Nothing Found spurious emissions (No spurious emissions were detected.) Note 3: Measurement receive antenna polarization: H (Horizontal), V (Vertical) Note 4: For restricted bands, the peak measurement is fully sufficient, as the max field strength as measured with the Peak-Detector meets the AV-Limit so that the AV level does not need to be reported in addition. Note 5: For un-restricted bands, unwanted emissions shall be attenuated by at least 20 dB relative to the maximum measured in-band level (107.85 dBuV/m). Note 6: No level of unwanted emissions exceeds the level of the fundamental emission. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 32 of 55
: Rev. 01 FCC Test Report Report No. : FR5D2512AC Transmitter Radiated Unwanted Emissions (Above 1GHz) Modulation Mode NTX 11b 1 Test Freq. (MHz) Polarization 2437 V Note 1: >20dB means spurious emission levels that exceed the level of 20 dB below the applicable limit. Note 2: N/F means Nothing Found spurious emissions (No spurious emissions were detected.) Note 3: Measurement receive antenna polarization: H (Horizontal), V (Vertical) Note 4: For restricted bands, the peak measurement is fully sufficient, as the max field strength as measured with the Peak-Detector meets the AV-Limit so that the AV level does not need to be reported in addition. Note 5: For un-restricted bands, unwanted emissions shall be attenuated by at least 20 dB relative to the maximum measured in-band level (109.89 dBuV/m). Note 6: No level of unwanted emissions exceeds the level of the fundamental emission. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 33 of 55
: Rev. 01 FCC Test Report Report No. : FR5D2512AC Transmitter Radiated Unwanted Emissions (Above 1GHz) Modulation Mode NTX 11b 1 Test Freq. (MHz) Polarization 2437 H Note 1: >20dB means spurious emission levels that exceed the level of 20 dB below the applicable limit. Note 2: N/F means Nothing Found spurious emissions (No spurious emissions were detected.) Note 3: Measurement receive antenna polarization: H (Horizontal), V (Vertical) Note 4: For restricted bands, the peak measurement is fully sufficient, as the max field strength as measured with the Peak-Detector meets the AV-Limit so that the AV level does not need to be reported in addition. Note 5: For un-restricted bands, unwanted emissions shall be attenuated by at least 20 dB relative to the maximum measured in-band level (109.89 dBuV/m). Note 6: No level of unwanted emissions exceeds the level of the fundamental emission. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 34 of 55
: Rev. 01 FCC Test Report Report No. : FR5D2512AC Transmitter Radiated Unwanted Emissions (Above 1GHz) Modulation Mode NTX 11b 1 Test Freq. (MHz) Polarization 2462 V Note 1: >20dB means spurious emission levels that exceed the level of 20 dB below the applicable limit. Note 2: N/F means Nothing Found spurious emissions (No spurious emissions were detected.) Note 3: Measurement receive antenna polarization: H (Horizontal), V (Vertical) Note 4: For restricted bands, the peak measurement is fully sufficient, as the max field strength as measured with the Peak-Detector meets the AV-Limit so that the AV level does not need to be reported in addition. Note 5: For un-restricted bands, unwanted emissions shall be attenuated by at least 20 dB relative to the maximum measured in-band level (107.26 dBuV/m). Note 6: No level of unwanted emissions exceeds the level of the fundamental emission. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 35 of 55
: Rev. 01 FCC Test Report Report No. : FR5D2512AC Transmitter Radiated Unwanted Emissions (Above 1GHz) Modulation Mode NTX 11b 1 Test Freq. (MHz) Polarization 2462 H Note 1: >20dB means spurious emission levels that exceed the level of 20 dB below the applicable limit. Note 2: N/F means Nothing Found spurious emissions (No spurious emissions were detected.) Note 3: Measurement receive antenna polarization: H (Horizontal), V (Vertical) Note 4: For restricted bands, the peak measurement is fully sufficient, as the max field strength as measured with the Peak-Detector meets the AV-Limit so that the AV level does not need to be reported in addition. Note 5: For un-restricted bands, unwanted emissions shall be attenuated by at least 20 dB relative to the maximum measured in-band level (107.26 dBuV/m). Note 6: No level of unwanted emissions exceeds the level of the fundamental emission. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 36 of 55
: Rev. 01 FCC Test Report Report No. : FR5D2512AC Transmitter Radiated Unwanted Emissions (Above 1GHz) Modulation Mode NTX 11g 2 Test Freq. (MHz) Polarization 2412 V Note 1: >20dB means spurious emission levels that exceed the level of 20 dB below the applicable limit. Note 2: N/F means Nothing Found spurious emissions (No spurious emissions were detected.) Note 3: Measurement receive antenna polarization: H (Horizontal), V (Vertical) Note 4: For restricted bands, the peak measurement is fully sufficient, as the max field strength as measured with the Peak-Detector meets the AV-Limit so that the AV level does not need to be reported in addition. Note 5: For un-restricted bands, unwanted emissions shall be attenuated by at least 20 dB relative to the maximum measured in-band level (107.33 dBuV/m). Note 6: No level of unwanted emissions exceeds the level of the fundamental emission. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 37 of 55
: Rev. 01 FCC Test Report Report No. : FR5D2512AC Transmitter Radiated Unwanted Emissions (Above 1GHz) Modulation Mode NTX 11g 2 Test Freq. (MHz) Polarization 2412 H Note 1: >20dB means spurious emission levels that exceed the level of 20 dB below the applicable limit. Note 2: N/F means Nothing Found spurious emissions (No spurious emissions were detected.) Note 3: Measurement receive antenna polarization: H (Horizontal), V (Vertical) Note 4: For restricted bands, the peak measurement is fully sufficient, as the max field strength as measured with the Peak-Detector meets the AV-Limit so that the AV level does not need to be reported in addition. Note 5: For un-restricted bands, unwanted emissions shall be attenuated by at least 20 dB relative to the maximum measured in-band level (107.33 dBuV/m). Note 6: No level of unwanted emissions exceeds the level of the fundamental emission. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 38 of 55
: Rev. 01 FCC Test Report Report No. : FR5D2512AC Transmitter Radiated Unwanted Emissions (Above 1GHz) Modulation Mode NTX 11g 2 Test Freq. (MHz) Polarization 2437 V Note 1: >20dB means spurious emission levels that exceed the level of 20 dB below the applicable limit. Note 2: N/F means Nothing Found spurious emissions (No spurious emissions were detected.) Note 3: Measurement receive antenna polarization: H (Horizontal), V (Vertical) Note 4: For restricted bands, the peak measurement is fully sufficient, as the max field strength as measured with the Peak-Detector meets the AV-Limit so that the AV level does not need to be reported in addition. Note 5: For un-restricted bands, unwanted emissions shall be attenuated by at least 20 dB relative to the maximum measured in-band level (112.78 dBuV/m). Note 6: No level of unwanted emissions exceeds the level of the fundamental emission. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 39 of 55
: Rev. 01 FCC Test Report Report No. : FR5D2512AC Transmitter Radiated Unwanted Emissions (Above 1GHz) Modulation Mode NTX 11g 2 Test Freq. (MHz) Polarization 2437 H Note 1: >20dB means spurious emission levels that exceed the level of 20 dB below the applicable limit. Note 2: N/F means Nothing Found spurious emissions (No spurious emissions were detected.) Note 3: Measurement receive antenna polarization: H (Horizontal), V (Vertical) Note 4: For restricted bands, the peak measurement is fully sufficient, as the max field strength as measured with the Peak-Detector meets the AV-Limit so that the AV level does not need to be reported in addition. Note 5: For un-restricted bands, unwanted emissions shall be attenuated by at least 20 dB relative to the maximum measured in-band level (112.78 dBuV/m). Note 6: No level of unwanted emissions exceeds the level of the fundamental emission. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 40 of 55
: Rev. 01 FCC Test Report Report No. : FR5D2512AC Transmitter Radiated Unwanted Emissions (Above 1GHz) Modulation Mode NTX 11g 2 Test Freq. (MHz) Polarization 2462 V Note 1: >20dB means spurious emission levels that exceed the level of 20 dB below the applicable limit. Note 2: N/F means Nothing Found spurious emissions (No spurious emissions were detected.) Note 3: Measurement receive antenna polarization: H (Horizontal), V (Vertical) Note 4: For restricted bands, the peak measurement is fully sufficient, as the max field strength as measured with the Peak-Detector meets the AV-Limit so that the AV level does not need to be reported in addition. Note 5: For un-restricted bands, unwanted emissions shall be attenuated by at least 20 dB relative to the maximum measured in-band level (108.11 dBuV/m). Note 6: No level of unwanted emissions exceeds the level of the fundamental emission. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 41 of 55
: Rev. 01 FCC Test Report Report No. : FR5D2512AC Transmitter Radiated Unwanted Emissions (Above 1GHz) Modulation Mode NTX 11g 2 Test Freq. (MHz) Polarization 2462 H Note 1: >20dB means spurious emission levels that exceed the level of 20 dB below the applicable limit. Note 2: N/F means Nothing Found spurious emissions (No spurious emissions were detected.) Note 3: Measurement receive antenna polarization: H (Horizontal), V (Vertical) Note 4: For restricted bands, the peak measurement is fully sufficient, as the max field strength as measured with the Peak-Detector meets the AV-Limit so that the AV level does not need to be reported in addition. Note 5: For un-restricted bands, unwanted emissions shall be attenuated by at least 20 dB relative to the maximum measured in-band level (108.11 dBuV/m). Note 6: No level of unwanted emissions exceeds the level of the fundamental emission. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 42 of 55
: Rev. 01 FCC Test Report Report No. : FR5D2512AC Transmitter Radiated Unwanted Emissions (Above 1GHz) Modulation Mode NTX HT20 2 Test Freq. (MHz) Polarization 2412 V Note 1: >20dB means spurious emission levels that exceed the level of 20 dB below the applicable limit. Note 2: N/F means Nothing Found spurious emissions (No spurious emissions were detected.) Note 3: Measurement receive antenna polarization: H (Horizontal), V (Vertical) Note 4: For restricted bands, the peak measurement is fully sufficient, as the max field strength as measured with the Peak-Detector meets the AV-Limit so that the AV level does not need to be reported in addition. Note 5: For un-restricted bands, unwanted emissions shall be attenuated by at least 20 dB relative to the maximum measured in-band level (106.35 dBuV/m). Note 6: No level of unwanted emissions exceeds the level of the fundamental emission. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 43 of 55
: Rev. 01 FCC Test Report Report No. : FR5D2512AC Transmitter Radiated Unwanted Emissions (Above 1GHz) Modulation Mode NTX HT20 2 Test Freq. (MHz) Polarization 2412 H Note 1: >20dB means spurious emission levels that exceed the level of 20 dB below the applicable limit. Note 2: N/F means Nothing Found spurious emissions (No spurious emissions were detected.) Note 3: Measurement receive antenna polarization: H (Horizontal), V (Vertical) Note 4: For restricted bands, the peak measurement is fully sufficient, as the max field strength as measured with the Peak-Detector meets the AV-Limit so that the AV level does not need to be reported in addition. Note 5: For un-restricted bands, unwanted emissions shall be attenuated by at least 20 dB relative to the maximum measured in-band level (106.35 dBuV/m). Note 6: No level of unwanted emissions exceeds the level of the fundamental emission. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 44 of 55
: Rev. 01 FCC Test Report Report No. : FR5D2512AC Transmitter Radiated Unwanted Emissions (Above 1GHz) Modulation Mode NTX HT20 2 Test Freq. (MHz) Polarization 2437 V Note 1: >20dB means spurious emission levels that exceed the level of 20 dB below the applicable limit. Note 2: N/F means Nothing Found spurious emissions (No spurious emissions were detected.) Note 3: Measurement receive antenna polarization: H (Horizontal), V (Vertical) Note 4: For restricted bands, the peak measurement is fully sufficient, as the max field strength as measured with the Peak-Detector meets the AV-Limit so that the AV level does not need to be reported in addition. Note 5: For un-restricted bands, unwanted emissions shall be attenuated by at least 20 dB relative to the maximum measured in-band level (110.48 dBuV/m). Note 6: No level of unwanted emissions exceeds the level of the fundamental emission. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 45 of 55
: Rev. 01 FCC Test Report Report No. : FR5D2512AC Transmitter Radiated Unwanted Emissions (Above 1GHz) Modulation Mode NTX HT20 2 Test Freq. (MHz) Polarization 2437 H Note 1: >20dB means spurious emission levels that exceed the level of 20 dB below the applicable limit. Note 2: N/F means Nothing Found spurious emissions (No spurious emissions were detected.) Note 3: Measurement receive antenna polarization: H (Horizontal), V (Vertical) Note 4: For restricted bands, the peak measurement is fully sufficient, as the max field strength as measured with the Peak-Detector meets the AV-Limit so that the AV level does not need to be reported in addition. Note 5: For un-restricted bands, unwanted emissions shall be attenuated by at least 20 dB relative to the maximum measured in-band level (110.48 dBuV/m). Note 6: No level of unwanted emissions exceeds the level of the fundamental emission. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 46 of 55
: Rev. 01 FCC Test Report Report No. : FR5D2512AC Transmitter Radiated Unwanted Emissions (Above 1GHz) Modulation Mode NTX HT20 2 Test Freq. (MHz) Polarization 2462 V Note 1: >20dB means spurious emission levels that exceed the level of 20 dB below the applicable limit. Note 2: N/F means Nothing Found spurious emissions (No spurious emissions were detected.) Note 3: Measurement receive antenna polarization: H (Horizontal), V (Vertical) Note 4: For restricted bands, the peak measurement is fully sufficient, as the max field strength as measured with the Peak-Detector meets the AV-Limit so that the AV level does not need to be reported in addition. Note 5: For un-restricted bands, unwanted emissions shall be attenuated by at least 20 dB relative to the maximum measured in-band level (106.47 dBuV/m). Note 6: No level of unwanted emissions exceeds the level of the fundamental emission. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 47 of 55
: Rev. 01 FCC Test Report Report No. : FR5D2512AC Transmitter Radiated Unwanted Emissions (Above 1GHz) Modulation Mode NTX HT20 2 Test Freq. (MHz) Polarization 2462 H Note 1: >20dB means spurious emission levels that exceed the level of 20 dB below the applicable limit. Note 2: N/F means Nothing Found spurious emissions (No spurious emissions were detected.) Note 3: Measurement receive antenna polarization: H (Horizontal), V (Vertical) Note 4: For restricted bands, the peak measurement is fully sufficient, as the max field strength as measured with the Peak-Detector meets the AV-Limit so that the AV level does not need to be reported in addition. Note 5: For un-restricted bands, unwanted emissions shall be attenuated by at least 20 dB relative to the maximum measured in-band level (106.47 dBuV/m). Note 6: No level of unwanted emissions exceeds the level of the fundamental emission. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 48 of 55
: Rev. 01 FCC Test Report Report No. : FR5D2512AC Transmitter Radiated Unwanted Emissions (Above 1GHz) Modulation Mode NTX HT40 2 Test Freq. (MHz) Polarization 2422 V Note 1: >20dB means spurious emission levels that exceed the level of 20 dB below the applicable limit. Note 2: N/F means Nothing Found spurious emissions (No spurious emissions were detected.) Note 3: Measurement receive antenna polarization: H (Horizontal), V (Vertical) Note 4: For restricted bands, the peak measurement is fully sufficient, as the max field strength as measured with the Peak-Detector meets the AV-Limit so that the AV level does not need to be reported in addition. Note 5: For un-restricted bands, unwanted emissions shall be attenuated by at least 20 dB relative to the maximum measured in-band level (102.31 dBuV/m). Note 6: No level of unwanted emissions exceeds the level of the fundamental emission. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 49 of 55
: Rev. 01 FCC Test Report Report No. : FR5D2512AC Transmitter Radiated Unwanted Emissions (Above 1GHz) Modulation Mode NTX HT40 2 Test Freq. (MHz) Polarization 2422 H Note 1: >20dB means spurious emission levels that exceed the level of 20 dB below the applicable limit. Note 2: N/F means Nothing Found spurious emissions (No spurious emissions were detected.) Note 3: Measurement receive antenna polarization: H (Horizontal), V (Vertical) Note 4: For restricted bands, the peak measurement is fully sufficient, as the max field strength as measured with the Peak-Detector meets the AV-Limit so that the AV level does not need to be reported in addition. Note 5: For un-restricted bands, unwanted emissions shall be attenuated by at least 20 dB relative to the maximum measured in-band level (102.31 dBuV/m). Note 6: No level of unwanted emissions exceeds the level of the fundamental emission. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 50 of 55
: Rev. 01 FCC Test Report Report No. : FR5D2512AC Transmitter Radiated Unwanted Emissions (Above 1GHz) Modulation Mode NTX HT40 2 Test Freq. (MHz) Polarization 2437 V Note 1: >20dB means spurious emission levels that exceed the level of 20 dB below the applicable limit. Note 2: N/F means Nothing Found spurious emissions (No spurious emissions were detected.) Note 3: Measurement receive antenna polarization: H (Horizontal), V (Vertical) Note 4: For restricted bands, the peak measurement is fully sufficient, as the max field strength as measured with the Peak-Detector meets the AV-Limit so that the AV level does not need to be reported in addition. Note 5: For un-restricted bands, unwanted emissions shall be attenuated by at least 20 dB relative to the maximum measured in-band level (102.43 dBuV/m). Note 6: No level of unwanted emissions exceeds the level of the fundamental emission. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 51 of 55
: Rev. 01 FCC Test Report Report No. : FR5D2512AC Transmitter Radiated Unwanted Emissions (Above 1GHz) Modulation Mode NTX HT40 2 Test Freq. (MHz) Polarization 2437 H Note 1: >20dB means spurious emission levels that exceed the level of 20 dB below the applicable limit. Note 2: N/F means Nothing Found spurious emissions (No spurious emissions were detected.) Note 3: Measurement receive antenna polarization: H (Horizontal), V (Vertical) Note 4: For restricted bands, the peak measurement is fully sufficient, as the max field strength as measured with the Peak-Detector meets the AV-Limit so that the AV level does not need to be reported in addition. Note 5: For un-restricted bands, unwanted emissions shall be attenuated by at least 20 dB relative to the maximum measured in-band level (102.43 dBuV/m). Note 6: No level of unwanted emissions exceeds the level of the fundamental emission. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 52 of 55
: Rev. 01 FCC Test Report Report No. : FR5D2512AC Transmitter Radiated Unwanted Emissions (Above 1GHz) Modulation Mode NTX HT40 2 Test Freq. (MHz) Polarization 2452 V Note 1: >20dB means spurious emission levels that exceed the level of 20 dB below the applicable limit. Note 2: N/F means Nothing Found spurious emissions (No spurious emissions were detected.) Note 3: Measurement receive antenna polarization: H (Horizontal), V (Vertical) Note 4: For restricted bands, the peak measurement is fully sufficient, as the max field strength as measured with the Peak-Detector meets the AV-Limit so that the AV level does not need to be reported in addition. Note 5: For un-restricted bands, unwanted emissions shall be attenuated by at least 20 dB relative to the maximum measured in-band level (101.58 dBuV/m). Note 6: No level of unwanted emissions exceeds the level of the fundamental emission. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 53 of 55
: Rev. 01 FCC Test Report Report No. : FR5D2512AC Transmitter Radiated Unwanted Emissions (Above 1GHz) Modulation Mode NTX HT40 2 Test Freq. (MHz) Polarization 2452 H Note 1: >20dB means spurious emission levels that exceed the level of 20 dB below the applicable limit. Note 2: N/F means Nothing Found spurious emissions (No spurious emissions were detected.) Note 3: Measurement receive antenna polarization: H (Horizontal), V (Vertical) Note 4: For restricted bands, the peak measurement is fully sufficient, as the max field strength as measured with the Peak-Detector meets the AV-Limit so that the AV level does not need to be reported in addition. Note 5: For un-restricted bands, unwanted emissions shall be attenuated by at least 20 dB relative to the maximum measured in-band level (101.58dBuV/m). Note 6: No level of unwanted emissions exceeds the level of the fundamental emission. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 54 of 55
: Rev. 01 FCC Test Report Report No. : FR5D2512AC Test Equipment and Calibration Data 4 Instrument Manufacturer Model No. Serial No. Characteristics Calibration Date Remark EMC Receiver R&S ESCS 30 100174 9kHz ~ 2.75GHz Apr. 15. 2015 AC Conduction LISN SCHWARZBECK MESS-ELEKTRONIK NSLK 8127 8127-477 9kHz ~ 30MHz Jan. 22, 2015 AC Conduction RF Cable-CON HUBER+SUHNER RG213/U 07611832020001 9kHz ~ 30MHz Oct. 30, 2015 AC Conduction EMI Filter LINDGREN LRE-2030 2651
< 450 Hz NCR AC Conduction Note: Calibration Interval of instruments listed above is one year. Instrument Manufacturer Model No. Serial No. Characteristics Calibration Date Remark Spectrum Analyzer Signal Generator R&S R&S FSV 40 101500 9kHz ~ 40GHz May 06, 2015 RF Conducted SMR40 100116 10MHz ~ 40GHz Jul. 28, 2015 RF Conducted Power Sensor Anritsu MA2411B 0917017 300MHz ~ 40GHz Feb. 17, 2015 RF Conducted Anritsu Power Meter Note: Calibration Interval of instruments listed above is one year. ML2495A 0949003 300MHz ~ 40GHz Feb. 17, 2015 RF Conducted Instrument Manufacturer Model No. Serial No. Characteristics Calibration Date Remark 3m Semi Anechoic Chamber 3m Semi Anechoic Chamber Amplifier Amplifier Spectrum SIDT FRANKONIA SAC-3M 03CH03-HY SIDT FRANKONIA SAC-3M 03CH03-HY 30MHz ~ 1GHz 3m 1GHz ~ 18GHz 3m Nov. 28, 2015 Radiation Nov. 28, 2015 Radiation Radiation Radiation Radiation Radiation Radiation Radiation Radiation HP Agilent R&S 8447D 8449B FSP40 Bilog Antenna SCHAFFNER CBL 6112D Horn Antenna ETSLINDGREN 3115 2944A08033 10kHz ~ 1.3GHz May 11, 2015 3008A02120 1GHz ~ 26.5GHz Sep. 02, 2015 100004 9kHz ~ 40GHz Apr. 02, 2015 22237 6741 30MHz ~ 1GHz Sep. 18, 2015 1GHz ~ 18GHz Jul. 15, 2015 Horn Antenna SCHWARZBECK BBHA9170 BBHA9170154 18GHz ~ 40GHz Jan. 27, 2015 MF Antenna Mast Note: Calibration Interval of instruments listed above is one year. MF-7802 MF780208179 1 ~ 4 m N/A Instrument Manufacturer Model No. Serial No. Characteristics Calibration Date Remark Amplifier MITEQ JS44-18004000-33-8P 1840917 18GHz ~ 40GHz Jun. 02, 2015 Radiation R&S Loop Antenna Note: Calibration Interval of instruments listed above is two years. HFH2-Z2 100330 9kHz ~ 30MHz Nov. 16, 2015 Radiation SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Page No. Report Version
: 55 of 55
: Rev. 01
1 2 | AD HOC Declaration | Cover Letter(s) | 76.73 KiB | March 02 2016 |
Date: January 26, 2016 Subject: Ad Hoc Mode Function Declaration FCC ID: UIDSBG6580-2 IC: 6670A-SBG6580V2 To Whom it may concern, We, ARRIS Group, Inc., declare that the device (FCC ID: UIDSBG6580-2 /IC: 6670A-SBG6580V2 ) 1. is able to be operated on both master and client function with Ad Hoc Mode (limited to operate on US/Canada frequencies only) supported within following frequency bands:
a. 802.11bgn (2412~2462MHz2422~2452MHz) b. 5G Band 1: 5180~5240MHz5190~5230MHz c. 5G Band 4: 5745~5825MHz5755~5795MHz 2. is not able to operate on non-US/Canada frequencies, country code selection will be disabled for this device. Please contact the one signed below or the authorized agent for this filing. Thank you. Regards, Applicant Address
: ARRIS Group, Inc.
: 3871 Lakefield Drive Suite 300 Suwanee Georgia 30024 United States _________________________________ Antonio A Figueiredo, Regulatory/Compliance Signature Name and Job Title.
:
:
: tony.figueiredo@arris.com
: 678-473-5067 3871 Lakefield Drive Suwanee, GA 30024 phone: 678-473-8400 www.arris.com E-mail Tel.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2016-02-03 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
2 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2016-02-03
|
||||
1 2 | Applicant's complete, legal business name |
ARRIS
|
||||
1 2 | FCC Registration Number (FRN) |
0009654609
|
||||
1 2 | Physical Address |
3871 Lakefield Drive Suite 300
|
||||
1 2 |
3871 Lakefield Drive
|
|||||
1 2 |
SUWANEE
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 2 |
t******@timcoengr.com
|
|||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
UID
|
||||
1 2 | Equipment Product Code |
SBG6580-2
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
A******** A****** F********
|
||||
1 2 | Title |
Manager -Regulatory/Compliance
|
||||
1 2 | Telephone Number |
678-4********
|
||||
1 2 | Fax Number |
678-4********
|
||||
1 2 |
t******@arrisi.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 08/01/2016 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | NII - Unlicensed National Information Infrastructure TX | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless Cable Modem Gateways | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 and 40 MHz bandwidth modes. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
SPORTON International Inc.
|
||||
1 2 | Name |
A**** C****
|
||||
1 2 | Telephone Number |
886-3******** Extension:
|
||||
1 2 | Fax Number |
886-3********
|
||||
1 2 |
a******@sporton.com.tw
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC MO | 2412.00000000 | 2462.00000000 | 0.4500000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.059 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15E | 38 CC MO | 5745 | 5825 | 0.136 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC