128G +
80g 2 12 W 105 x H 75mm
User Manual Wireless Dual Drivers Stereo Headset Clari Air www.avantree.com 2.2 Connect with two mobile phones simultaneously STEP 1 Connect headset with the first phone as above. Then turn off Bluetooth of the first phone. STEP 2 Connect headset with the second phone as above. Then turn off the headset. STEP 3 Turn on Bluetooth of the first phone. Then turn on the headset. STEP 4 The headset will automatically connect to two phones.Otherwise it will automatically connect with the second phone, after that please tap from the first phone to manually connect it. 1. Headset overview Memory Ear hook LED indicator Volume down (Previous) USB charging Port Multi-function button (MFB) Volume up (Next) Earbuds
Battery
- 1 -
Micro USB charging cable Memory Foam Silicone Ear tips 1 H
5 1
Microphone Hard case
- 2 -
2. Working with mobile phone It is important to pair the headset with your Bluetooth enabled mobile phone for first time use. 2.1 Pairing one phone:
Step 1: Ensure the headset is off. Step 2: Press and hold the power button (about 5 seconds) until the LED blinks blue and red alternately, you will hear the voice prompt Power on and Pairing. Step 3
: Active Bluetooth on your phone and select Avantree Clari Air to connect, once connected you will hear the voice prompt Connected. Note: Once paired and connected, the headset will be automatically connected to your phone whenever you turn the headset on again, provided your phone is within range.
- 3 -
Settings Bluetooth Bluetooth Devices Avantree Clari Air Search
3. Fit We recommend that you try each eartip (small, medium and large), perform a sound check and choose the eartip that gives the best sound experience. STEP 1 Hold the headset as shown, green color ring on the left side and red one on the right. STEP 2 Put the earbuds in your ears, adjust the position for maximum comfort and fit. STEP 3 The ear loop can be rotated, rotate it to adjust the angle to achieve optimal fit and stability. STEP 4 Drape the earbuds around the back of your neck and enjoy. L R Over the ear Green Red STEP 1 STEP 2 STEP 3 STEP 4 Antenna R L 4. How to use Button Function Power on Power off Note: Make sure your phone is in an armband / pocket / handbag on the right of your body. Otherwise, disconnection might be caused by your body blocking the Bluetooth signal. Wrong mobile phone area. Operation Press and hold MFB for 2 seconds, BLUE LED flashes Press and hold MFB for 3 seconds, RED LED flashes Press and hold MFB for 5 seconds, RED and BLUE LED flashes alternately. Press MFB once Press and hold MFB for 1 second Press MFB once Press MFB once Press MFB once Short press once Press and hold for 1 second Short press Press and hold once for 1 second Pairing Answer a call Reject a call End a call Play music Pause music Volume up Next track Volume down Previous track Note:
1.Some function may require to start the media player to play music at first. 2.Press or to turn volume up or down, you will hear beep once reach the maximum or minimum volume.
- 7 -
- 4 -
- 5 -
- 6 -
5. How to reset You may need to reset Clari Air if it is not working as expected. When Clari Air is reset to factory default settings, all the paired device information will be erased. Under standby mode (power on but not connected), press V+ and V- buttons simultaneously for about 5 seconds, LED indicator flashes Blue & Red together
(seems like pink) 2 times quickly and you will hear "disconnected", "power off", then successfully clear all paired list, the headset will enter pairing mode automatically after power on next time. 6 How to charge When the LED blinks red, you should recharge your headset. Remove the Micro USB port protector and charge the headset via the supplied Micro USB cable. It normally takes about 1.5 hours to fully charge the battery. The LED will stay red when charging. Once fully charged, the red LED will turn off and the blue LED will turn on. 7. Product Specifications Supported Profiles: Headset, Hands free, AVRCP, A2DP Supported audio codec: SBC, AAC, APTX Operational range: Class 2, up to 10 meters Play time: up to 5 hours Charge time: 1.5 hours Weight: 21g Earbud size: (L) 25mm * (D) 12mm NOTE: The talk and standby time may vary when used with different mobile phones or other compatible Bluetooth devices and are also dependent on different usage styles, settings and operating environment.
- 8 -
- 9 -
- 10 -
Charge from AC adapter Charge from PC Charging requirementYou can plug our supplied Micro USB cable to your own USB chargers (wall charger/travel charger/car charger, etc) with==5V/500mA-2A or to a PC/Mac USB port. It is OK to use most mobile phone chargers on the market. Dispose of the packaging and this product in accordance with the latest provisions.
www.avantree.com support@avantree.com Z-PKMN-AS20-V1 This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be u sed in portable exposure condition without restriction. FCC ID: 2AITF-BTHSAS20BLK