submitted | available | document details (if available) | source link |
---|---|---|---|
January 12 2020 | January 12 2020 | CQASZ20190901002E-04_simultaneous?transmission.doc Administrator Acrobat Distiller 11.0 (Windows) |
various | simultaneous transmission report | Parts List/Tune Up Info | 488.04 KiB | January 12 2020 |
Shenzhen Huaxia Testing Technology Co., Ltd 1F., Block A of Tongsheng Technology Building, Huahui Road, Dalang Street, Longhua District, Shenzhen, China Telephone:
Fax:
Website:
Report Template Version: V04 Report Template Revision Date: 2018-07-06
+86-755-26648640
+86-755-26648637 www.cqa-cert.com Test Report Report No. :
Applicant:
Address of Applicant:
CQASZ20190901002E-04 Avantree Technology Co., Ltd. The 4th Floor, Yuepeng Building, No.1019 Jiabin Rd, Luohu District, Shenzhen, China Equipment Under Test (EUT):
EUT Name:
All Model No.:
Wireless Stereo Headphones BTHS-AS90, BTHS-AS90B, BTHS-AS90C, BTHS-AS90M, BTHS-ANC033, BTHS-035 BTHS-AS90 Avantree 2AITF-BTHS-AS90 47 CFR Part 15, Subpart C 2019-12-13 2019-12-13 to 2019-12-24 2019-12-24 PASS*
Test Model No.:
Brand Name:
FCC ID:
Standards:
Date of Receipt:
Date of Test:
Date of Issue:
Test Result :
*In the configuration tested, the EUT complied with the standards specified above Tested By Reviewed By:
Approved By:
(Tom chen)
(Aaron Ma)
(Jack Ai) The test report is effective only with both signature and specialized stamp, The result(s) shown in this report refer only to the sample(s) tested. Without written approval of CQA, this report cant be reproduced except in full. Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190901002E-04 1 Version Revision History Of Report Report No. CQASZ20190901002E-04 Version Rev.01 Description Initial report Issue Date 2019-12-24 Page:2 of 17 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190901002E-04 2 Test Summary Test Item Test Requirement Test method Result Radiated Spurious Emissions 47 CFR Part 15, Subpart C Section 15.205/15.209, RSS-Gen Issue 5 Note: The simultaneously transmission mode ANSI C63.10 2013 PASS Page:3 of 17 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190901002E-04 3 Contents 1 2 3 4 5 6 Page VERSION................................................................................................................................................................ 2 TEST SUMMARY.................................................................................................................................................. 3 CONTENTS............................................................................................................................................................ 4 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 4.10 4.11 4.12 4.13 GENERAL INFORMATION................................................................................................................................. 5 CLIENT INFORMATION..................................................................................................................................... 5 GENERAL DESCRIPTION OF EUT...................................................................................................................5 GENERAL DESCRIPTION OF BT..................................................................................................................... 5 GENERAL DESCRIPTION OF NFC.................................................................................................................. 5 TEST ENVIRONMENT AND MODE....................................................................................................................6 DESCRIPTION OF SUPPORT UNITS................................................................................................................ 6 TEST LOCATION.............................................................................................................................................. 7 TEST FACILITY................................................................................................................................................ 7 STATEMENT OF THE MEASUREMENT UNCERTAINTY......................................................................................8 DEVIATION FROM STANDARDS.......................................................................................................................8 ABNORMALITIES FROM STANDARD CONDITIONS...........................................................................................8 OTHER INFORMATION REQUESTED BY THE CUSTOMER...............................................................................8 EQUIPMENT LIST.............................................................................................................................................9 TEST RESULTS AND MEASUREMENT DATA............................................................................................10 RADIATED SPURIOUS EMISSIONS................................................................................................................ 10 5.1.1 Radiated emission below 1GHz.......................................................................................................... 13 Transmitter emission above 1GHz..................................................................................................... 15 5.1.2 PHOTOGRAPHS - EUT TEST SETUP............................................................................................................16 RADIATED SPURIOUS EMISSION.................................................................................................................. 16 5.1 6.1 Page:4 of 17 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190901002E-04 4 General Information 4.1 Client Information Applicant:
Address of Applicant:
Manufacturer:
Address of Manufacturer:
Avantree Technology Co., Ltd. The 4th Floor, Yuepeng Building, No.1019 Jiabin Rd, Luohu District,Shenzhen, China Avantree Technology Co., Ltd. The 4th Floor, Yuepeng Building, No.1019 Jiabin Rd, Luohu District,Shenzhen, China 4.2 General Description of EUT Product Name:
All Model No.:
Test Model No.:
Trade Mark:
Hardware Version:
Software Version:
USB Cable:
AUX Cable:
Product Type:
Power Supply:
Wireless Stereo Headphones BTHS-AS90, BTHS-AS90B, BTHS-AS90C, BTHS-AS90M, BTHS-
ANC033, BTHS-035 BTHS-AS90 Avantree Rer 2.7 BT5.0 98cm(Unshielded) 148cm(Unshielded) Mobile Portable Fix Location lithium battery:DC3.7V, Charge by DC5V 4.3 General Description of BT Operation Frequency:
Bluetooth Version:
Modulation Technique:
Modulation Type:
Transfer Rate:
Number of Channel:
Hopping Channel Type:
Test Software of EUT:
Antenna Type:
Antenna Gain:
2402MHz~2480MHz V5.0 Frequency Hopping Spread Spectrum(FHSS) GFSK, /4DQPSK, 8DPSK 1Mbps/2Mbps/3Mbps 79 Adaptive Frequency Hopping systems Blue test 3 (manufacturer declare ) Integral antenna 0.9dBi 4.4 General Description of NFC 13.56MHz ASK Induction coil 0dBi Operation Frequency:
Modulation Type:
Antenna Type:
Antenna Gain:
. Page:5 of 17 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190901002E-04 4.5 Test Environment and Mode Operating Environment:
Temperature:
Humidity:
Atmospheric Pressure:
24.2 C 36 % RH 1015mbar The following test modes were adjusted during the tests:
Operation mode Mode 1 (BT+NFC) Description of the operation mode Transmission at BT (GFSK-DH5-2402MHz) Transmission at NFC (13.56MHz) 4.6 Description of Support Units The EUT has been tested with associated equipment below. Description Manufacturer Model No. Remark FCC certification PC Lenovo ThinkPad E450c FCC ID and DOC CQA Page:6 of 17 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190901002E-04 4.7 Test Location All tests were performed at:
Shenzhen Huaxia Testing Technology Co., Ltd., 1F., Block A of Tongsheng Technology Building, Huahui Road, Dalang Street, Longhua New District, Shenzhen, Guangdong, China 4.8 Test Facility A2LA (Certificate No. 4742.01) Shenzhen Huaxia Testing Technology Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 4742.01. FCC Registration No.: 522263 Shenzhen Huaxia Testing Technology Co., Ltd., Shenzhen EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration No.:522263 Page:7 of 17 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190901002E-04 4.9 Statement of the measurement uncertainty The data and results referenced in this document are true and accurate. The reader is cautioned that there may be errors within the calibration limits of the equipment and facilities. The measurement uncertainty was calculated for all measurements listed in this test report acc. to CISPR 16 - 4 Specification for radio disturbance and immunity measuring apparatus and methods Part 4: Uncertainty in EMC Measurements and is documented in the Shenzhen Huaxia Testing Technology Co., Ltd. quality system acc. to DIN EN ISO/IEC 17025. Furthermore, component and process variability of devices similar to that tested may result in additional deviation. The manufacturer has the sole responsibility of continued compliance of the device. Hereafter the best measurement capability for CQA laboratory is reported:
Test Range Uncertainty Notes Radiated Emission Below 1GHz Radiated Emission Above 1GHz Conducted Disturbance 0.15~30MHz 5.12dB 4.60dB 3.34dB
(1)
(1)
(1)
(1)This uncertainty represents an expanded uncertainty expressed at approximately the 95%
confidence level using a coverage factor of k=2. 4.10 Deviation from Standards None. 4.11 Abnormalities from Standard Conditions None. 4.12 Other Information Requested by the Customer None. Page:8 of 17 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190901002E-04 4.13 Equipment List Test Equipment EMI Test Receiver Spectrum analyzer Manufacturer Model No. R&S R&S ESR7 FSU26 Instrument No. CQA-005 CQA-038 Date Calibration Calibration Due Date 2019/10/25 2020/10/24 2019/10/25 2020/10/24 CQA-036 CQA-060 CQA-011 CQA-012 CQA-088 2019/10/25 2020/10/24 2019/10/21 2020/10/20 2020/9/25 2019/9/26 2019/9/26 2020/9/25 2020/9/24 2019/9/25 C007 C013 2019/9/26 2020/9/25 2019/9/26 2020/9/25 CQA-080 2019/9/26 2020/9/25 CQA-30 CQA-067 2019/9/26 2019/9/26 2020/9/25 2020/9/25 AMF-6D-02001800-29-
MITEQ 20P Schwarzbeck FMZB1516 R&S R&S HL562 HF906 Schwarzbeck BBHA 9170 Preamplifier Loop antenna Bilog Antenna Horn Antenna Horn Antenna Coaxial Cable
(Above 1GHz) Coaxial Cable
(Below 1GHz) Antenna Connector CQA CQA CQA Power Sensor Power divider KEYSIGHT MIDWEST N/A N/A RFC-01 U2021XA PWD-2533-02-SMA-79 Page:9 of 17 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190901002E-04 5 Test results and Measurement Data 5.1 Radiated Spurious Emissions Test Requirement:
Test Method:
Test Site:
Receiver Setup:
Limit:
47 CFR Part 15C Section 15.209 and 15.205, RSS-Gen Issue 5 ANSI C63.10 2013 Measurement Distance: 3m (Semi-Anechoic Chamber) Frequency 0.009MHz-0.090MHz 0.009MHz-0.090MHz 0.090MHz-0.110MHz 0.110MHz-0.490MHz 0.110MHz-0.490MHz 0.490MHz -30MHz 30MHz-1GHz Above 1GHz Frequency Detector Peak Average Quasi-peak Peak Average Quasi-peak Quasi-peak Peak Peak Field strength
(microvolt/meter) 0.009MHz-0.490MHz 0.490MHz-1.705MHz 2400/F(kHz) 24000/F(kHz) 1.705MHz-30MHz 30MHz-88MHz 88MHz-216MHz 216MHz-960MHz 960MHz-1GHz Above 1GHz 30 100 150 200 500 500 RBW 10kHz 10kHz 10kHz 10kHz 10kHz 10kHz 100 kHz 1MHz 1MHz Limit
(dBuV/m)
40.0 43.5 46.0 54.0 54.0 VBW 30kHz 30kHz 30kHz 30kHz 30kHz 30kHz 300kHz 3MHz 10Hz Remark
Quasi-peak Quasi-peak Quasi-peak Quasi-peak Average Remark Peak Average Quasi-peak Peak Average Quasi-peak Quasi-peak Peak Average Measurement distance (m) 300 30 30 3 3 3 3 3 Note: 15.35(b), Unless otherwise specified, the limit on peak radio frequency emissions is 20dB above the maximum permitted average emission limit applicable to the equipment under test. This peak limit applies to the total peak emission level radiated by the device. Page:10 of 17 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190901002E-04 Test Setup:
Figure 2. 30MHz to 1GHz Test Procedure:
Figure 1. Below 30MHz m c 0 5 1 Figure 3. Above 1 GHz a. 1) Below 1G: The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter semi-anechoic camber. The table was rotated 360 degrees to determine the position of the highest radiation. 2) Above 1G: The EUT was placed on the top of a rotating table 1.5 meters above the ground at a 3 meter semi-anechoic camber. The table was rotated 360 degrees to determine the position of the highest radiation. Note: For the radiated emission test above 1GHz:
Place the measurement antenna away from each area of the EUT determined to be a source of emissions at the specified measurement distance, while keeping the measurement antenna aimed at the source of emissions at each frequency of significant emissions, with polarization oriented for maximum response. The measurement antenna may have to be higher or lower than the EUT, depending on the radiation pattern of the emission and staying aimed at the emission source for receiving the maximum signal. The final measurement antenna elevation shall be that which maximizes the emissions. The measurement antenna elevation for maximum emissions shall be restricted to a range of heights of from 1 m to 4 m above the ground or reference ground plane. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The antenna height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both Page:11 of 17 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190901002E-04 horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters(for the test frequency of below 30MHz, the antenna was tuned to heights 1 meter) and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. f. e. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. g. Test the EUT in the lowest channel ,the middle channel ,the Highest channel h. Repeat above procedures until all frequencies measured was complete. Pretest the EUT at Mode 1 For below 1GHz, through Pre-scan, find Mode 1 is the worst case. Only the worst case is recorded in the report. Pass Test Mode:
Test Results:
Page:12 of 17 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190901002E-04 5.1.1 Radiated emission below 1GHz 30MHz~1GHz_mode 1 is the worst case Test mode:
mode 1 Vertical Page:13 of 17 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190901002E-04 Test mode:
mode 1 Horizontal Page:14 of 17 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190901002E-04 5.1.2 Transmitter emission above 1GHz Test mode:
Frequency
(MHz) 2390 2400 2390 2400 4804 7206 4804 7206 2483.5 2483.5 Meter Reading
(dBV) 53.61 55.50 55.29 55.44 53.73 50.43 52.63 49.52 55.26 54.17 Factor
(dB)
-9.2
-9.39
-9.2
-9.39
-4.33 1.01
-4.33 1.01
-9.29
-9.29 Mode 1 Limits Emission Level
(dBV/m)
(dBV/m) 44.41 46.11 46.09 46.05 49.40 51.44 48.30 50.53 45.97 44.88 74 74 74 74 74 74 74 74 74 74 Over
(dB)
-29.59
-27.89
-27.91
-27.95
-24.60
-22.56
-25.70
-23.47
-28.03
-29.12 Detector Type Ant. Pol. H/V Peak Peak Peak Peak peak peak peak peak Peak Peak H H V V H H V V H V 1) The field strength is calculated by adding the Antenna Factor, Cable Factor & Preamplifier. The basic equation with a sample calculation is as follows:
Final Test Level =Receiver Reading + Antenna Factor + Cable Factor Preamplifier Factor 2) Scan from 9kHz to 25GHz,The disturbance above 13GHz and below 30MHz was very low, and the above harmonics were the highest point could be found when testing, so only the above harmonics had been displayed. The amplitude of spurious emissions from the radiator which are attenuated more than 20dB below the limit need not be reported. Page:15 of 17 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190901002E-04 6 Photographs - EUT Test Setup 6.1 Radiated Spurious Emission 9KHz~30MHz 30MHz~1GHz:
Page:16 of 17 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190901002E-04 Above 1GHz:
THE END Page:17 of 17
This product uses the FCC Data API but is not endorsed or certified by the FCC