For a Better Experience 1. Wireless speaker overview MODE Mode Indicator User Manual Wireless Mini Soundbar Torpedo Plus www.avantree.com 4. Pair and connect with Bluetooth-enabled devices STEP1 Get Torpedo Plus into paring mode For first time use, power on, Torpedo Plus will automatically enter pairing mode and keep flash Red and Blue alternatively. Torpedo Plus STEP 2 Activate Bluetooth on your phone/PC/notebook and select Torpedo Plus.
(For PC, make sure the playback device is Torpedo Plus.) STEP 3 Once connected, you will hear a beep and the LED indicator will stay on. NOTE:
Once disconnected, Torpedo Plus will automatically enter pairing mode. For details on how to set up with your PC/notebook, please see support.avantree.com
- 4 -
Warnning: Suggest to use Torpedo Plus with our provided charger in order to get high quality sound. 8. How to charge If the battery is low, the mode indicator will flash. Normally it takes about 2.5 hours to fully charge the battery. The charging LED indicator will stay red when charging and will turn off when fully charged. ON OFF LED Micro USB Charging cable Charging LED indicator NOTE When the battery power is less than 40%, the volume will become smaller as the battery become lower.
- 8 -
MODE
-
+
T o r p e d o P l u s Volume down Previous track Volume up Next track ON OFF LED Charging LED indicator Power charging port 2. Whats in the box?
Wireless mini soundbar AC adapter Micro USB charging cable 3.5mm audio cable User manual / Quick user guide 3. Power On/Off T o r p e d o P l u s Power ON: Connect Torpedo Plus to AC outlet with the adapter. Slide the on/off switch to ON. Power OFF: Slide the on/off switch to OFF. For a Better Experience User Manual Wireless Mini Soundbar Torpedo Plus www.avantree.com ON OFF LED NOTE: All accessories are also available on avantree.com Power ON/OFF Aux in AC adapter Micro USB charging cable 3.5mm audio cable User manual /
Quick user guide Note: In order to save battary and extend its life, when there is no audio input for 30 mins, Torpedo plus will turn off automatically. You need to turn off first, then turn on again for next use.
- 1 -
- 2 -
- 3 -
Reconnect Bluetooth Whenever you turn on Torpedo Plus again it will be automatically reconnected to the latest device. 5. Connect with non-Bluetooth-enabled devices When the device is not Bluetooth enabled, it can be connected to the speaker by using the 3.5 mm audio cable. The speaker will automatically switch to the external audio input mode and the indicator will stay on. 6. Connect with two devices simultaneously STEP1 Connect Torpedo Plus with the first device as above. Then turn off Blueooth of the first device. STEP2 Connect Torpedo plus with the second device as above. STEP3 Turn on Bluetooth of the first device and click Torpedo plus, it will re -connect it with Torpedo Plus. ON OFF LED 3.5mm audio cable
- 5 -
9. Product specifications BT Version: 4.1 Support profiles: A2DP V1.2, AVRCP V1.4 Built-in battery: 2200 mA / 3.7 V Charge time: About 2.5 hours Working time on battery up to 5.5 hours Operational range: 10 meters Output power: 5W2 Charger voltage: DC 5 V/ 1.5A Frequency response: 50 Hz~20 KHz Signal-to-noise ration: >85 dB Product weight: 480 g Dimensions: 275 mm x 60mm x 50 mm Torpedo Plus
- 6 -
+
-
Volume up Next track Volume down Previous track 10.Warnnings This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. FCC ID: 2AITF-BTSP-006P-BLK To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. For more FAQ information, please refer to support.avantree.com
- 9 -
Dispose of the packaging and this product in accordance with the latest provisions. 7. How to use Once connecting successfully with another device, you can press the MODE button to switch sound modes:It will automatically go back last audio mode when power on again. Button Function Opertion MODE Balance Audio Mode Press MODE once Press MODE once Super Bass 3D Surround Press MODE once Press and hold MODE Manually enter pairing mode for 3S Clear pairing history Double click MODE (under pairing mode) Press V+ once Press and hold V+ for 2s Press V- once Press and hold V- for 2s LED status Red Green Blue Flash Red and Blue alternatively stay purple for 1s, then flash Red and Blue alternatively
-
-
-
-
www.avantree.com support@avantree.com Z-PKMN-BTSP-006P-V1
- 7 -
For a Better Experience