| all | frequencies |
|
exhibits | applications |
|---|---|---|---|---|
| manual |
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 2 |
|
Users Manual | Users Manual | 1.23 MiB | ||||
| 1 2 | Cover Letter(s) | |||||||
| 1 2 | External Photos | |||||||
| 1 2 | Internal Photos | |||||||
| 1 2 | ID Label/Location Info | |||||||
| 1 2 | RF Exposure Info | December 10 2017 | ||||||
| 1 2 |
|
Test Report | Test Report | 2.60 MiB | ||||
| 1 2 | Test Setup Photos |
| 1 2 | Users Manual | Users Manual | 1.23 MiB |
Baicells EG7035L-M2 User Manual V100R001C00 02 All rights reserved Baicells Technologies Co., Ltd. About This Document This document introduces the specifications of BaicellsEG7035L-M2 CPE and guides users to install and configure it. Copyright Notice Baicells copyrights this specification. No part of this specification may be reproduced in any form or means, without the prior written consent of Baicells. Disclaimer This specification is preliminary and is subject to change at any time without notice. Baicellsassumes no responsibility for any errors contained herein. For more information, please consult our technical engineers. Disposal of Electronic and Electrical Waste Pursuant to the WEEE EU Directive, electronic and electrical waste must not be disposed of with unsorted waste. Pleasecontact your local recycling authority for disposal of this product. Revision Record Date Version Description 5June,2017 V1.0 Initial released. Contact Us Baicells Technologies Co., Ltd.North America Address: 555 Republic Drive, Suite 200 Plano, TX 75074 E-mail: support_na@baicells.com Phone: +1-972-800-1157 Website: http://www.baicells.com/
Contents 1. Product Overview ......................................................................................................... 1 1.1 Introduction .............................................................................................................. 1 1.2 Features ..................................................................................................................... 1 1.3 Appearance ............................................................................................................... 1 2. Technical Specifications ............................................................................................... 5 2.1 Basic Specification .................................................................................................... 5 2.2 RF Specification ........................................................................................................ 5 2.3 SW Specification ....................................................................................................... 6 2.4 Device Management .................................................................................................. 6 2.5 Environment Specification ......................................................................................... 7 2.6 Regulatory Compliance .............................................................................................. 7 3. Installation Guide.......................................................................................................... 9 3.1 Support Materials ....................................................................................................... 9 3.2 Install USIM Card and Cables ..................................................................................... 9 3.3 Install on Wall ........................................................................................................... 11 3.4 Install on Pole ........................................................................................................... 12 3.5 Grounding ................................................................................................................. 12 4. Configuration Guide ................................................................................................... 13 4.1 Log in ........................................................................................................................ 13 4.2 View Status ............................................................................................................... 13 4.3 Basic Configuration .................................................................................................. 14 4.3.1 LTE Setting ........................................................................................................ 14 4.3.2 Set Connection Method .................................................................................... 14 4.3.3 Set Scan Mode .................................................................................................. 15 4.3.4 Lock Frequency (Earfcn) ................................................................................... 15 4.3.5 Lock PCI ............................................................................................................. 16 Appendix A FAQs ......................................................................................................... 18 Appendix B Shipping List ............................................................................................. 19 Figures Figure 1-1 EG7035L-M2 Appearance .......................................................................... 2 Figure 1-2 Interface and Button of EG7035L-M2 ......................................................... 2 Figure 1-3 LED Indicators of EG7035L-M2 .................................................................. 3 Figure 4-1 Login Page ................................................................................................ 13 Figure 4-2 View Status ............................................................................................... 14 Figure 4-3 Set Connection Method ............................................................................ 14 Figure 4-4 Set Scan Mode ......................................................................................... 15 Figure 4-5 Lock Frequency ........................................................................................ 16 Figure 4-6 Lock Frequency ........................................................................................ 17 Tables Table 1-1 Description of EG7035L-M2 Interface and Button ....................................... 2 Table 1-2 LED Indicator Description ............................................................................. 3 Table 2-1 Basic Specification ....................................................................................... 5 Table 2-2 RF Specification ........................................................................................... 5 Table 2-3 SW Specification .......................................................................................... 6 Table 2-4 Device Management ..................................................................................... 6 Table 2-5 Environment Specification ............................................................................ 7 Table 3-1 Support Materials for Installing ..................................................................... 9 1. Product Overview 1.1 Introduction Baicells is a high-tech company dedicated in wireless broadband access solutions and service operation. With the advent of the Internet+ era, the development of WBB is imminent. Through continuous innovation, Baicells launches the world first mobile broadband system based on the Internet architecture and unlicensed spectrum. Baicells can provide series CPEs, include indoor and outdoor unit on different spectrums. BaicellsEG7035L-M2 is high performance outdoor CPE. The EG7035L-M2 has the superior wireless access performance and comprehensive routing capabilities, which have the abilities to bring the end-users WBB services. 1.2 Features The EG7035L-M2 is designed according to the simplicity principle, which can evolve in a short period and realize fast customization, delivery and deployment as well. The main features of the EG7035L-M2 is as follows:
Support TD-LTE network according to the operators choice. LTE comply with 3GPP Release9 CAT4. LTE TDD band42&band43. Support the 100Mbps Ethernet interface. Intuitionist and convenient Web-based management. Built-in LTE bipolar directional high gain antenna. Support TR069 and OMA-DM network management protocol. Support cell lock, SIM lock, and Pin lock. User-friendly design of LED indicator. Power supply with PoE. Support pole installation or wall mounting. 1.3 Appearance The EG7035L-M2 appearance is shown in Figure 1-1. 1 Figure 1-1EG7035L-M2 Appearance The EG7035L-M2 interfaces and buttons are shown in Figure 1-2. Figure 1-2Interface and Button of EG7035L-M2 The EG7035L-M2 interface and button description is given in Table 1-1. Table 1-1 Description of EG7035L-M2 Interface and Button Interface & Button Description PoE TF SIM RESET GND Connected to the PoEpower adapter Support SD card Support 1.8V/3.0V USIM 2FF Long press over 10 seconds to restore the factory settings Connected to Earth by conductor The LED indicators are shown in Figure 1-3. 2 Figure 1-3 LED Indicators of EG7035L-M2 The description of LED indicators are given in Table 1-2. Table 1-2 LED Indicator Description Identity Description Color Status Description MIU Yellow OFF Reserved.
-
Steady On Reserved. Blanking Reserved. LTE Network state OFF LTE disconnected. Indicator Blue Steady On LTE connected. SIM SIM card status Yellow Steady On The SIM card is normal. indicator Blanking The SIM card is abnormal or not inserted. LAN 100Mbps Eth Yellow OFF Ethernet connection does not Indication established. Steady On Ethernet connection is normal. Blanking Data is transmitting. PWR Power Indicator Yellow OFF No Power Supply Steady On Power On LTE Signal 5 LTEs, Indicate Green All OFF Signal is too weak to attach. 3 Identity Description Color Status Description connection state and signal strength Steady On According to signal strength in turn light up Blanking Scanning the LTE network The CPE is authenticating. CPE is getting IP address from the LTE network. 4 2. Technical Specifications 2.1 Basic Specification Item Description LTE Standard 3GPP Release 9 Table 2-1 Basic Specification Ethernet LAN Port One RJ-45 port 10/100 auto-sensing, auto-MDX, PoE LED Indicators Power/LET Signal/LAN Indicator USIM Support 1.8V/3V 2FF Restore Button Tact Button Long press over 10s to restore the factory settings Power Supply Dimension Input: Universal range 100V~240V AC About 241mm * 154mm * 50mm Weight Color About 900g Pantone white C 2.2 RF Specification Item LTE Mode Table 2-2 RF Specification Description TDD LTE Channel Bandwidth MAX Output Power 5 MHz /10 MHz /15 MHz /20 MHz 232dBm LTE Standard Frequency 3GPP R9 Band42: 3400 MHz ~ 3600 MHz Band43: 3600 MHz ~ 3800 MHz LTE Antenna Gain 10dBi WifiStandard Frequency 802.11b/g/n 2400MHz~2483.5MHz WifiAntenna Gain 0dBi 5 2.3 SW Specification Item Table 2-3SW Specification Description Language Settings English Network Mode Bridge / NAT SIM PIN Management SIM Lock Network Connection setup Create, delete, and edit APNs Set up dial-up connection automatically Set up dial-up connection manual LTE Scan Mode Full Band Cell Lock VPN NAT Statistics Band / Frequency Preferred Support VPN pass through Support PPTP tunnel mode Port forwarding Port trigger DMZ UPnP LAN Link Status Transmit / Receive traffic Running Time 2.4 Device Management Item Maintenance TR069 Port mirror Syslog Table 2-4Device Management Description Date & Time setting Reset Restore factory settings Restore/Backup Configuration File Local upgrade FOTA upgrade Can enable or disable TR069 Management Can enable or disable the port mirror function Support the syslog function can send the log to the PC via LAN Diagnostics Support the Ping and trace route 6 2.5 Environment Specification Table 2-5Environment Specification Item Description Operating Temperature Storage Temperature
-40 ~ 55
-40 ~ 70 Operating Humidity 5% ~ 95%
2.6 Regulatory Compliance FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Warning This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 30cm between the radiator & your body. ISEDCCompliance This device complies with Innovation, Science, and Economic Development Canada licence-exempt RSS standard(s). 7 Operation is subject to the following two conditions: (1) This device may not cause in terference, and (2) This device must accept any interference, including interference t hat may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Innovation, Science et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. 8 3. Installation Guide 3.1 Support Materials Before installation, prepare the following support materialsaccordingly, asgiven in Table 3-1. Table 3-1Support Materials for Installing Item Description Ethernet cable Outdoor Shield CAT5E Shorter than 330 feet Ground wire 16mm yellow-green wire 3.2 Install USIM Card and Cables 1. Screw the screw on the waterproof cover, and open the waterproof cover. 2. Insert the USIM card to the USIM slot. Note following the directions. 3. Connect the Ethernet cable to the POE port, and connect the ground cable to the ground screw. 9 4. Close the waterproof cover and fasten the screw on the cover. 5. Connected Ethernet cable to the power adapter. Pay attention to the power adapter interface directions. 6. Power on, the LED indicator will light up. 10 3.3 Install on Wall 1. Slipping the bracket from the CPE. 2. Fit the CPE on the wall, and mark the drilling locations. 3. Drill four 10mm diameter and 70mm depth holes in the wall by following the marked locations. 4. Check the up/down direction of the bracket, and then fix it on wall using M5tapping screws. 5. Install the CPE to the bracket and fasten the screw. 11 3.4 Install onPole 1. Round an anti-slip rubber on the pole. 2. Fix the bracket using the hoop. 3. Install the CPE to the bracket and fasten the screw. 3.5 Grounding The EG7035L-M2 must begrounding, please contact professional person to operation. Using grounding cable, connect the grounding cable to the ground row. 12 4. Configuration Guide 4.1 Log in The EG7035L-M2 manages, configures, and maintains the device by web management page.The steps to log in are as follows:
1. In the address column of browser, type in http://192.168.150.1, then press Enter, login in page is shown in Figure 4-1. Figure 4-1 Login Page 2. Enter the user name and password, click "LOGIN". After password authentication, you can log on to the web management page. The default user name and password is admin. For security, it is recommended that you open the firewall, and keep your login password, WLAN FTP passwords and password well. 4.2 View Status In the overview area, you can view the device information and LTE status,such as Product name, Software version, PLMN, IMSI, RSRP, RSRQ, CINR, SINR, Tx Power, Cell ID, PCI, and so on, as shown in Figure 4-2. 13 Figure 4-2 View Status 4.3 Basic Configuration 4.3.1 LTE Setting To set the LTE Network, perform the following steps:
1. Choose LTE. 2. In the LTE Setting area, configure the LTE network. 4.3.2 Set Connection Method To set the LTE network connection method, perform the following steps:
1. Choose LTE>connection Method, enter the setting connection method page, as shown in Figure 4-3. Figure 4-3 Set Connection Method 14 2. In the connection Method area, set the connection method 3. There are two methods to connect the LTE network, it is needed to choose a method between Auto and Manual, if you want to auto connect to the LET network you should choose the Auto, otherwise you should choose Manual. 4. Click SAVE & APPLY. 4.3.3 Set Scan Mode To set the LTE network scan mode, perform the following steps:
1. Choose LTE>Scan Method, enter the setting scan method page, as shown in Figure 4-4. Figure 4-4 Set Scan Mode 2. In the Scan Method area, set the scan mode 3. You can choose full Band, Frequency Lock, or PCI Lock. 4.3.4 Lock Frequency (Earfcn) To clock the frequency, perform the following steps:
1. Choose LTE>Scan Method. 2. In the LTE Scan Method area, click Frequency Lock to lock the frequency. 3. Click ADD LIST, choose a band and frequency, and then click Add to add the band and frequency to the list, as shown in Figure 4-5. 15 Figure 4-5 Lock Frequency 4. Click SAVE & APPLY. 4.3.5 LockPCI To lock the PCI, perform the following steps:
1. Choose LTE>Scan Method. 2. In the LTE Scan Method area, click PCI Lock to lock the PCI. 3. Click ADD LIST you can choose a band, frequency and PCI, then click Add to add the frequency and PCI to the list, as shown in Figure 4-6. 16 Figure 4-6 Lock Frequency 4. Click SAVE & APPLY. 17 Appendix A FAQs The POWER indicator does not turn on. Make sure that the power cable is connected properly and the CPE is powered on. Make sure that the power adapter is compatible with the CPE. Fails to Login to the web management page. Make sure that the CPE is started. Verify that the CPE is correctly connected to the computer through a network cable. If the problem persists, contact authorized local service suppliers. The CPE fails to search for the wireless network. Check that the power adapter is connected properly. Check that the CPE is placed in an open area that is far away from obstructions, such as concrete or wooden walls. Check that the CPE is placed far away from household electrical appliances that generate strong electromagnetic field, such as microwave ovens, refrigerators, and satellite dishes. If the problem persists, contact authorized local service suppliers. The power adapter of the CPE is overheated. The CPE will be overheated after being used for a long time. Therefore, power off the CPE when you are not using it. Check that the CPE is properly ventilated and shielded from direct sunlight. The parameters are restored to default values. If the CPE powers off unexpectedly while being configured, the parameters may be restored to the default settings. After configuring the parameters, download the configuration file to quickly restore the CPE to the desired settings. 18 Appendix B Shipping List The product outward appearance, the color take the material object as, the picture only Amount 1 1 1 1 supply reference. Index Content Picture EG7035L-M2 CPE with Simple Mounting bracket Power cord PoEadapter User Manual 1 2 3 4 19
| 1 2 | Test Report | Test Report | 2.60 MiB |
Shenzhen Zhongjian Nanfang Testing Co., Ltd. 1. Cover Page Report No: CCISE170705201 FCC REPORT Applicant:
Baicells Technologies Co., Ltd. Address of Applicant:
3F, Hui Yuan Development Building, No.1 Shangdi Information Industry Base, Haidian Dist., Beijing, China Equipment Under Test (EUT) Product Name:
LTE Outdoor CPE Model No.:
EG7035L-M2 Trade mark:
BaiCells FCC ID:
2AG32EG7035LM2 Applicable standards:
FCC CFR Title 47 Part 2 FCC CFR Title 47 Part 90 Subpart Z Date of sample receipt: 05 Jul., 2017 Date of Test:
05 Jul., 2017 to 11 Jul., 2017 Date of report issued:
11 Jul., 2017 Test Result:
PASS*
*
In the configuration tested, the EUT complied with the standards specified above. Authorized Signature:
Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the CCIS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 2. Version Report No: CCISE170705201 Version No. Date 00 11 Jul., 2017 Description Original Tested by:
Date:
11 Jul., 2017 Test Engineer Reviewed by:
Date:
11 Jul., 2017 Project Engineer Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 2 of 73 3. Contents Report No: CCISE170705201 Page 1. COVER PAGE .............................................................................................................................................................. 1 2. VERSION ....................................................................................................................................................................... 2 3. CONTENTS ................................................................................................................................................................... 3 4. TEST SUMMARY ......................................................................................................................................................... 4 5. GENERAL INFORMATION ........................................................................................................................................ 5 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 CLIENT INFORMATION ............................................................................................................................................ 5 GENERAL DESCRIPTION OF E.U.T. ...................................................................................................................... 5 TEST MODES .......................................................................................................................................................... 6 DESCRIPTION OF SUPPORT UNITS ........................................................................................................................ 6 RELATED SUBMITTAL(S) / GRANT (S) .................................................................................................................... 6 TEST METHODOLOGY ............................................................................................................................................ 6 LABORATORY FACILITY .......................................................................................................................................... 6 LABORATORY LOCATION ....................................................................................................................................... 6 TEST INSTRUMENTS LIST ....................................................................................................................................... 7 6. SYSTEM TEST CONFIGURATION .......................................................................................................................... 8 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 6.10 6.11 EUT CONFIGURATION ........................................................................................................................................... 8 EUT EXERCISE ...................................................................................................................................................... 8 CONFIGURATION OF TESTED SYSTEM .................................................................................................................. 8 DESCRIPTION OF TEST MODES ............................................................................................................................. 8 TRANSMIT OUTPUT POWER AND PSD .................................................................................................................. 9 OCCUPY BANDWIDTH .......................................................................................................................................... 20 EMISSION MASK .................................................................................................................................................. 26 OUT OF BAND EMISSION AT ANTENNA TERMINALS .............................................................................................. 31 FIELD STRENGTH OF SPURIOUS RADIATION MEASUREMENT ............................................................................... 48 FREQUENCY STABILITY V.S. TEMPERATURE MEASUREMENT............................................................................. 52 FREQUENCY STABILITY V.S. VOLTAGE MEASUREMENT ..................................................................................... 57 TEST SETUP PHOTO ............................................................................................................................................... 60 EUT CONSTRUCTIONAL DETAILS ...................................................................................................................... 61 7 8 Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 3 of 73 4. Test Summary Test Item RF Output Power Modulation Characteristics 99% & -26 dB Occupied Bandwidth Emission Mask Spurious Emissions at Antenna Terminal Field Strength of Spurious Radiation Frequency stability vs. temperature Frequency stability vs. voltage Report No: CCISE170705201 Section in CFR 47 FCC Part 2.1046 Part 90.1321 Part 2.1047 Part 2.1049 Part 90.209 Part 90.210(b) Part 2.1051 Part 90.1323 Part 2.1053 Part 90.1323 Part 2.1055(a)(1)(b) Part 90.213(a) Part 2.1055(d)(1)(2) Part 90.213(a) Result Pass Pass Pass Pass Pass Pass Pass Pass Pass: The EUT complies with the essential requirements in the standard. Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 4 of 73 5. General Information 5.1 Client Information Report No: CCISE170705201 Applicant:
Baicells Technologies Co., Ltd. Address of Applicant:
3F, Hui Yuan Development Building, No.1 Shangdi Information Industry Base, Haidian Dist., Beijing, China Manufacturer Baicells Technologies Co., Ltd. Address of Manufacturer:
3F, Hui Yuan Development Building, No.1 Shangdi Information Industry Base, Haidian Dist., Beijing, China 5.2 General Description of E.U.T. Product Name:
LTE Outdoor CPE Model No.:
EG7035L-M2 Operation Frequency range: Band43: 3650MHz~3700MHz Modulation type:
BPSK, QPSK, 16QAM Antenna type:
Antenna gain:
AC adapter:
Internal antenna (N type) 10 dBi Model: G0549A-240-050 Input: AC100-240V 50/60Hz 0.5 A Output: DC 24V, 500 mA Power supply:
DC 24V Test Channel:
Band43 5MHz 10MHz Channel:
Frequency (MHz) Channel:
Frequency (MHz) Lowest Middle Highest 3652.5 3675.0 3697.5 Lowest Middle Highest 3655.0 3675.0 3695.0 15MHz 20MHz Channel:
Frequency (MHz) Channel:
Frequency (MHz) Lowest Middle Highest 3657.5 3675.0 3692.5 Lowest Middle Highest 3660.0 3675.0 3690.0 Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 5 of 73 5.3 Test modes Data mode (QPSK) Data mode (16QAM) Report No: CCISE170705201 Keep the EUT in data communicating mode (QPSK).
(5MHz, 10MHz, 15MHz, 20MHz) Keep the EUT in data communicating mode (16QAM).
(5MHz, 10MHz, 15MHz, 20MHz) 5.4 Description of Support Units Manufacturer Description Model Serial Number FCC ID/DoC
/
/
/
/
/
5.5 Related Submittal(s) / Grant (s) FCC: This submittal(s) (test report) is filing to comply with Section Part 90 subpart Z of the FCC CFR 47 Rules. 5.6 Test Methodology FCC: Both conducted and radiated testing were performed according to the procedures document on TIA/EIA 603 and FCC CFR 47.1046, 2.1047, 2.1049, 2.1051, 2.1053, 2.1055 and 2.1057 5.7 Laboratory Facility The test facility is recognized, certified, or accredited by the following organizations:
FCC - Registration No.: 817957 Shenzhen Zhongjian Nanfang Testing Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in out files. Registration 817957, February 27, 2012. IC - Registration No.: 10106A-1 The 3m Semi-anechoic chamber of Shenzhen Zhongjian Nanfang Testing Co., Ltd. has been Registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.:
10106A-1. CNAS - Registration No.: CNAS L6048 Shenzhen Zhongjian Nanfang Testing Co., Ltd. is accredited to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration laboratories for the competence of testing. The Registration No. is CNAS L6048. 5.8 Laboratory Location Shenzhen Zhongjian Nanfang Testing Co., Ltd. Address: No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Tel: +86-755-23118282 Fax: +86-755-23116366 Email: info@ccis-cb.com Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 6 of 73 5.9 Test Instruments list Report No: CCISE170705201 Test Equipment Manufacturer Model No. Inventory No. Cal. Date Cal. Due date
(mm-dd-yy)
(mm-dd-yy) 3m SAC SAEMC 9(L)*6(W)* 6(H) CCIS0001 08-23-2014 08-22-2017 BiConiLog Antenna SCHWARZBECK VULB9163 CCIS0005 02-25-2017 02-24-2018 Horn Antenna SCHWARZBECK BBHA9120D CCIS0006 02-25-2017 02-24-2018 Pre-amplifier
(10kHz-1.3GHz) HP 8447D CCIS0003 02-25-2017 02-24-2018 Pre-amplifier Compliance Direction
(1GHz-18GHz) Systems Inc. PAP-1G18 CCIS0011 02-25-2017 02-24-2018 Pre-amplifier
(18-26GHz) Rohde & Schwarz AFS33-18002 650-30-8P-44 GTS218 02-25-2017 02-24-2018 Horn Antenna ETS-LINDGREN 3160 GTS217 02-25-2017 02-24-2018 Spectrum analyzer 9k-30GHz Spectrum Analyzer 20Hz-26.5GHz Rohde & Schwarz FSP30 CCIS0023 02-25-2017 02-24-2018 Agilent N9020A MY50510123 02-25-2017 02-24-2018 EMI Test Receiver Rohde & Schwarz Loop antenna Laplace instrument ESRP7 RF300 CCIS0167 02-25-2017 02-24-2018 EMC0701 02-25-2017 02-24-2018 Coaxial Cable Coaxial Cable Coaxial cable Coaxial Cable Coaxial Cable CCIS CCIS CCIS CCIS CCIS N/A N/A N/A N/A N/A CCIS0016 02-25-2017 02-24-2018 CCIS0017 02-25-2017 02-24-2018 CCIS0018 02-25-2017 02-24-2018 CCIS0019 02-25-2017 02-24-2018 CCIS0087 02-25-2017 02-24-2018 Signal Generator Rohde & Schwarz SMR 20 CCIS0024 02-25-2017 02-24-2018 Signal Generator Rohde & Schwarz Signal Analyzer Rohde & Schwarz SMX FSIQ3 CCIS0064 02-25-2017 02-24-2018 CCIS0088 02-25-2017 02-24-2018 Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 7 of 73 6. System test configuration 6.1 EUT Configuration Report No: CCISE170705201 The EUT configuration for testing is installed on RF field strength measurement to meet the commissions requirement and operating in a manner which intends to maximize its emission characteristics in a continuous normal application. 6.2 EUT Exercise The EUT (Transmitter) was operated in the engineering mode to fix the Tx frequency which was for the purpose of the measurements. 6.3 Configuration of Tested System 6.4 Description of Test Modes The EUT has been tested under operating condition. EUT staying in continuous transmitting mode. Channel Low, Mid and High for each type band with rated data rate were chosen for full testing. The field strength of spurious radiation emission was measured as EUT stand-up position (H mode) and lie down position (E1, E2 mode) for three modes with power adaptor, earphone and Data cable. The worst-case H mode. Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 8 of 73 6.5 Transmit Output Power and PSD Test Requirement:
FCC part90.1321(a) Test Method:
FCC part2.1046 and KDB 971168 D01 Report No: CCISE170705201 Limit:
FCC:
(a) Base and fixed stations are limited to 25 watts/25 MHz equivalent isotropically radiated power (EIRP). In any event, the peak EIRP powerdensity shall not exceed 1 Watt in any one-megahertz slice of spectrum.
(b) In addition to the provisions in paragraph (a) of this section, transmitters operating in the 3650-3700 MHz band that emit multipledirectional beams, simultaneously or sequentially, for the purpose of directing signals to individual receivers or to groups of receivers provided theemissions comply with the following:
(1) Different information must be transmitted to each receiver.
(2) If the transmitter employs an antenna system that emits multiple directional beams but does not emit multiple directional beamssimultaneously, the total output power conducted to the array or arrays that comprise the device, i.e., the sum of the power supplied to allantennas, antenna elements, staves, etc. and summed across all carriers or frequency channels, shall not exceed the limit specified in paragraph(a) of this section, as applicable. The directional antenna gain shall be computed as follows:
(i) The directional gain, in dBi, shall be calculated as the sum of 10 log (number of array elements or staves) plus the directional gain, in dBi,of the individual element or stave having the highest gain.
(ii) A lower value for the directional gain than that calculated in paragraph (b)(2)(i) of this section will be accepted if sufficient evidence ispresented, e.g., due to shading of the array or coherence loss in the beam-forming.
(3) If a transmitter employs an antenna that operates simultaneously on multiple directional beams using the same or different frequencychannels and if transmitted beams overlap, the power shall be reduced to ensure that the aggregate power from the overlapping beams does notexceed the limit specified in paragraph (b)(2) of this section. In addition, the aggregate power transmitted simultaneously on all beams shall notexceed the limit specified in paragraph (b)(2) of this section by more than 8 dB.
(4) Transmitters that emit a single directional beam shall operate under the provisions of Test Procedure:
paragraph (b)(2) of this section. RBW=1MHz, VBW=3MHz, Detector mode= RMS , Trace mode: Power averaging over 100 sweeps Test Instruments:
Refer to section 5.8 for details Refer to section 5.3 for details Passed Test mode:
Test results:
Measurement Data Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 9 of 73 Band43 Power:
Modulation Frequency
(MHz) QPSK(5MHz) 16QAM(5MHz) QPSK(10MHz) 16QAM(10MHz) QPSK(15MHz) 16QAM(15MHz) QPSK(20MHz) 16QAM(20MHz) 3652.50 3675.00 3697.50 3652.50 3675.00 3697.50 3655.00 3675.00 3695.00 3655.00 3675.00 3695.00 3657.50 3675.00 3692.50 3657.50 3675.00 3692.50 3660.00 3675.00 3690.00 3660.00 3675.00 3690.00 Output Power
(dBm) 24.90 25.08 24.31 25.21 25.16 24.42 25.13 24.97 24.82 25.32 25.42 24.99 24.58 24.74 24.40 25.11 24.87 24.44 24.54 24.16 24.16 24.80 24.60 24.30 Report No: CCISE170705201 Antenna gain
(dBi) EIRP
(dBm) Limited
(dBm) 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 34.90 35.08 34.31 35.21 35.16 34.42 35.13 34.97 34.82 35.32 35.42 34.99 34.58 34.74 34.40 35.11 34.87 34.44 34.54 34.16 34.16 34.80 34.60 34.30 37.01 40.02 41.78 43.03 Note: Limit=44dBm+10log(bandwidth/25MHz) Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 10 of 73 Test plot as below:
QPSK 16QAM 5MHz Report No: CCISE170705201 Lowest channel Middle channel Highest channel Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 11 of 73 Report No: CCISE170705201 QPSK 16QAM 10MHz Lowest channel Middle channel Highest channel Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 12 of 73 QPSK 16QAM 15MHz Report No: CCISE170705201 Lowest channel Middle channel Highest channel Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 13 of 73 QPSK 16QAM 20MHz Report No: CCISE170705201 Lowest channel Middle channel Highest channel Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 14 of 73 Band43 PSD:
Modulation Frequency
(MHz) QPSK(5MHz) 16QAM(5MHz) QPSK(10MHz) 16QAM(10MHz) QPSK(15MHz) 16QAM(15MHz) QPSK(20MHz) 16QAM(20MHz) Test plot as below:
3652.50 3675.00 3697.50 3652.50 3675.00 3697.50 3655.00 3675.00 3695.00 3655.00 3675.00 3695.00 3657.50 3675.00 3692.50 3657.50 3675.00 3692.50 3660.00 3675.00 3690.00 3660.00 3675.00 3690.00 Report No: CCISE170705201 Antenna gain
(dBi) PSD
(dBm) Limited
(dBm) 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 28.86 28.99 29.00 28.93 28.96 28.92 28.09 28.58 27.18 28.23 28.03 27.57 25.65 25.37 25.77 26.72 25.78 25.68 23.65 24.19 24.53 24.43 23.99 24.55 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 Output Power
(dBm) 18.86 18.99 19.00 18.93 18.96 18.92 18.09 18.58 17.18 18.23 18.03 17.57 15.65 15.37 15.77 16.72 15.78 15.68 13.65 14.19 14.53 14.43 13.99 14.55 Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 15 of 73 QPSK 16QAM 5MHz Report No: CCISE170705201 Lowest channel Middle channel Highest channel Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 16 of 73 Report No: CCISE170705201 QPSK 16QAM 10MHz Lowest channel Middle channel Highest channel Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 17 of 73 QPSK 16QAM 15MHz Report No: CCISE170705201 Lowest channel Middle channel Highest channel Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 18 of 73 QPSK 16QAM 20MHz Report No: CCISE170705201 Lowest channel Middle channel Highest channel Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 19 of 73 6.6 Occupy Bandwidth Test Requirement:
FCC part 90.209 Test Method:
FCC part 2.1049 and KDB 971168 D01 Test Procedure:
1. The EUTs output RF connector was connected with a short cable to Report No: CCISE170705201 the spectrum analyzer 2. The transmitter shall be operated at its maximum carrier powermeasured under normal test conditions. 3. The span of the analyzer shall be set to capture all products of themodulation process, including the emission skirts. 4. The resolution bandwidth (RBW) shall be in the range of 1% to 5%
ofthe occupied bandwidth (OBW) and video bandwidth (VBW) shall beapproximately 3x RBW. Test Instruments:
Refer to section 5.8 for details Test mode:
Test results:
Refer to section 5.3 for details Passed Measurement Data Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 20 of 73 Bandwidth(MHz) Modulation Test Channel 99% Occupy bandwidth (MHz) Report No: CCISE170705201 5 10 15 20 QPSK 16QAM QPSK 16QAM QPSK 16QAM QPSK 16QAM Lowest Middle Highest Lowest Middle Highest Lowest Middle Highest Lowest Middle Highest Lowest Middle Highest Lowest Middle Highest Lowest Middle Highest Lowest Middle Highest 4.5090 4.5018 4.4917 4.5016 4.5173 4.5070 9.0167 9.0449 9.0397 9.0504 9.0495 9.0520 13.500 13.472 13.465 13.480 13.471 13.491 17.909 17.905 17.931 17.897 17.879 17.873 Test plot as follows:
Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 21 of 73 QPSK 16QAM 5MHz Report No: CCISE170705201 Lowest channel Middle channel Highest channel Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 22 of 73 Report No: CCISE170705201 QPSK 16QAM 10MHz Lowest channel Middle channel Highest channel Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 23 of 73 Report No: CCISE170705201 QPSK 16QAM 15MHz Lowest channel Middle channel Highest channel Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 24 of 73 Report No: CCISE170705201 QPSK 16QAM 20MHz Lowest channel Middle channel Highest channel Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 25 of 73 6.7 Emission Mask Test Requirement:
FCC part 90.210(b) Test Method KDB 971168 D01 Report No: CCISE170705201 Limit:
Test Procedure:
Emission Mask B. For transmitters that are equipped with an audio low-
pass filter, the power of any emission must be attenuated below the unmodulated carrier power (P) as follows:
(1) On any frequency removed from the assigned frequency by more than 50 percent, but not more than 100 percent of the authorized bandwidth: At least 25 dB.
(2) On any frequency removed from the assigned frequency by more than 100 percent, but not more than 250 percent of the authorized bandwidth: At least 35 dB.
(3) On any frequency removed from the assigned frequency by more than 250 percent of the authorized bandwidth: At least 43 + 10 log (P) dB. 1 The RF output of the transceiver was connected to a spectrum analyzer through appropriate attenuation. 2 RBW=100kHz, VBW=1MHz, Detector mode= RMS, Trace mode: Power averaging over 100 sweeps Test Instruments:
Refer to section 5.8 for details Test mode:
Test results:
Refer to section 5.3 for details PASS Measurement Data:
Test plots as below:
Chain 0:
QPKS 64QAM 5MHz Lowest channel Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 26 of 73 Report No: CCISE170705201 Middle channel Highest channel Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 27 of 73 Report No: CCISE170705201 QPKS 64QAM 10MHz Lowest channel Middle channel Highest channel Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 28 of 73 Report No: CCISE170705201 QPKS 64QAM 15MHz Lowest channel Middle channel Highest channel Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 29 of 73 Report No: CCISE170705201 QPKS 64QAM 20MHz Lowest channel Middle channel Highest channel Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 30 of 73 6.8 Out of band emission at antenna terminals Test Requirement:
FCC part90.1323 Test Method:
FCC part2.1051 and KDB 971168 D01 Report No: CCISE170705201 Limit:
Test Procedure:
-13dBm 1 2 3 The RF output of the transceiver was connected to a spectrum analyzer through appropriate attenuation. The resolution bandwidth of the spectrum analyzer was set at 100 kHz when below 1GHz, 1MHz when above 1 GHz; sufficient scans were taken to show the out of band Emissions if any up to 10th harmonic. For the out of band: Set the RBW=100 kHz, VBW=300 kHz when below 1 GHz, RBW =1 MHz, VBW=3 MHz when above 1 GHz, Start=30MHz, Stop= 10th harmonic. 4 Band Edge Requirements: In the 1 MHz bands immediately outside and adjacent to the frequency block, a resolution bandwidth of at least 1 percent of the emission bandwidth of the fundamental emission of the transmitter may be employed to measure the out of band Emissions. Test Instruments:
Refer to section 5.8 for details Test mode:
Test results:
Remark:
Refer to section 5.3 for details Passed During the test, pre-scan the QPSK, 16QAM modulation, and found the QPSK modulation(10MHz/20MHz middle channel) is the worst case. Test plots as follows (worst case):
Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 31 of 73 Spurious emission LTE band 43 Part: 5MHz Report No: CCISE170705201 Test Mode:
LTE band 43(5 MHz 16QAM) RB Size 25 & RB Offset 0 Test Channel:
Lowest channel 30MHz~1GHz 1GHz~30GHz Test Mode:
LTE band 43(5 MHz 16QAM) RB Size 25 & RB Offset 0 Test Channel:
Middle channel 30MHz~1GHz 1GHz~30GHz Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 32 of 73 A **3DBRBW 1 MHzVBW 3 MHzSWT 5 msAtt 30 dB*Ref 30 dBmOffset 10 dBLVLCenter515 MHzSpan970 MHz97 MHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -42.95 dBm 904.940000000 MHzD1 -13 dBmDate: 3.JUL.2017 18:30:56Offset 10 dB A LVL**3DBRBW 1 MHzVBW 3 MHzSWT 580 msAtt 30 dB*Ref 30 dBmStart1 GHzStop30 GHz2.9 GHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -22.09 dBm 29.188000000 GHzD1 -13 dBmDate: 3.JUL.2017 14:04:27 A **3DBRBW 1 MHzVBW 3 MHzSWT 5 msAtt 30 dB*Ref 30 dBmOffset 10 dBLVLCenter515 MHzSpan970 MHz97 MHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -42.53 dBm 961.200000000 MHzD1 -13 dBmDate: 3.JUL.2017 18:31:13Offset 10 dB A LVL**3DBRBW 1 MHzVBW 3 MHzSWT 580 msAtt 30 dB*Ref 30 dBmStart1 GHzStop30 GHz2.9 GHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -22.11 dBm 13.702000000 GHzD1 -13 dBmDate: 3.JUL.2017 14:06:00 Test Mode:
LTE band 43(5 MHz 16QAM) RB Size 25 & RB Offset 0 Test Channel:
Highest channel Report No: CCISE170705201 30MHz~1GHz 1GHz~30GHz LTE band 43 Part: 10MHz Test Mode:
LTE band 43(10 MHz 16QAM) RB Size 50 & RB Offset 0 Test Channel:
Lowest channel 30MHz~1GHz 1GHz~30GHz Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 33 of 73 A **3DBRBW 1 MHzVBW 3 MHzSWT 5 msAtt 30 dB*Ref 30 dBmOffset 10 dBLVLCenter515 MHzSpan970 MHz97 MHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -41.98 dBm 838.980000000 MHzD1 -13 dBmDate: 3.JUL.2017 18:31:26Offset 10 dB A LVL**3DBRBW 1 MHzVBW 3 MHzSWT 580 msAtt 30 dB*Ref 30 dBmStart1 GHzStop30 GHz2.9 GHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -22.06 dBm 13.644000000 GHzD1 -13 dBmDate: 3.JUL.2017 14:07:29 A **3DBRBW 1 MHzVBW 3 MHzSWT 5 msAtt 30 dB*Ref 30 dBmOffset 10 dBLVLCenter515 MHzSpan970 MHz97 MHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -42.18 dBm 840.920000000 MHzD1 -13 dBmDate: 3.JUL.2017 18:31:48Offset 10 dB A LVL**3DBRBW 1 MHzVBW 3 MHzSWT 580 msAtt 30 dB*Ref 30 dBmCenter15.5 GHzSpan29 GHz2.9 GHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -22.20 dBm 15.036000000 GHzD1 -13 dBmDate: 3.JUL.2017 14:09:00 Test Mode:
LTE band 43(10 MHz 16QAM) RB Size 50 & RB Offset 0 Test Channel:
Middle channel Report No: CCISE170705201 30MHz~1GHz 1GHz~30GHz Test Mode:
LTE band 43(10 MHz 16QAM) RB Size 50 & RB Offset 0 Test Channel:
Highest channel 30MHz~1GHz 1GHz~30GHz Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 34 of 73 A **3DBRBW 1 MHzVBW 3 MHzSWT 5 msAtt 30 dB*Ref 30 dBmOffset 10 dBLVLCenter515 MHzSpan970 MHz97 MHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -42.80 dBm 786.600000000 MHzD1 -13 dBmDate: 3.JUL.2017 18:32:01Offset 10 dB A LVL**3DBRBW 1 MHzVBW 3 MHzSWT 580 msAtt 30 dB*Ref 30 dBmCenter15.5 GHzSpan29 GHz2.9 GHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -22.73 dBm 13.644000000 GHzD1 -13 dBmDate: 3.JUL.2017 14:10:15 A **3DBRBW 1 MHzVBW 3 MHzSWT 5 msAtt 30 dB*Ref 30 dBmOffset 10 dBLVLCenter515 MHzSpan970 MHz97 MHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -42.94 dBm 123.120000000 MHzD1 -13 dBmDate: 3.JUL.2017 18:32:12Offset 10 dB A LVL**3DBRBW 1 MHzVBW 3 MHzSWT 580 msAtt 30 dB*Ref 30 dBmCenter15.5 GHzSpan29 GHz2.9 GHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -22.30 dBm 15.094000000 GHzD1 -13 dBmDate: 3.JUL.2017 14:11:25 LTE band 43 Part: 15MHz Test Mode:
LTE band 43(15 MHz 16QAM) RB Size 75 & RB Offset 0 Test Channel:
Lowest channel Report No: CCISE170705201 30MHz~1GHz 1GHz~30GHz Test Mode:
LTE band 43(15 MHz 16QAM) RB Size 75 & RB Offset 0 Test Channel:
Middle channel 30MHz~1GHz 1GHz~30GHz Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 35 of 73 A **3DBRBW 1 MHzVBW 3 MHzSWT 5 msAtt 30 dB*Ref 30 dBmOffset 10 dBLVLCenter515 MHzSpan970 MHz97 MHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -42.12 dBm 590.660000000 MHzD1 -13 dBmDate: 3.JUL.2017 18:32:27Offset 10 dB A LVL**3DBRBW 1 MHzVBW 3 MHzSWT 580 msAtt 30 dB*Ref 30 dBmCenter15.5 GHzSpan29 GHz2.9 GHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -21.91 dBm 13.644000000 GHzD1 -13 dBmDate: 3.JUL.2017 14:12:48 A **3DBRBW 1 MHzVBW 3 MHzSWT 5 msAtt 30 dB*Ref 30 dBmOffset 10 dBLVLCenter515 MHzSpan970 MHz97 MHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -42.40 dBm 161.920000000 MHzD1 -13 dBmDate: 3.JUL.2017 18:32:39Offset 10 dB A LVL**3DBRBW 1 MHzVBW 3 MHzSWT 580 msAtt 30 dB*Ref 30 dBmCenter15.5 GHzSpan29 GHz2.9 GHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -22.18 dBm 13.702000000 GHzD1 -13 dBmDate: 3.JUL.2017 14:13:57 Test Mode:
LTE band 43(15 MHz 16QAM) RB Size 75 & RB Offset 0 Test Channel:
Highest channel Report No: CCISE170705201 30MHz~1GHz 1GHz~30GHz Test Mode:
LTE band 43(20 MHz 16QAM) RB Size 100 & RB Offset 0 Test Channel:
Lowest channel 30MHz~1GHz 1GHz~30GHz Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 36 of 73 A **3DBRBW 1 MHzVBW 3 MHzSWT 5 msAtt 30 dB*Ref 30 dBmOffset 10 dBLVLStart30 MHzStop1 GHz97 MHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -42.05 dBm 798.240000000 MHzD1 -13 dBmDate: 3.JUL.2017 18:37:02Offset 10 dB A LVL**3DBRBW 1 MHzVBW 3 MHzSWT 580 msAtt 30 dB*Ref 30 dBmCenter15.5 GHzSpan29 GHz2.9 GHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -22.50 dBm 29.130000000 GHzD1 -13 dBmDate: 3.JUL.2017 14:15:01 A **3DBRBW 1 MHzVBW 3 MHzSWT 5 msAtt 30 dB*Ref 30 dBmOffset 10 dBLVLCenter515 MHzSpan970 MHz97 MHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -42.51 dBm 842.860000000 MHzD1 -13 dBmDate: 3.JUL.2017 18:32:59Offset 10 dB A LVL**3DBRBW 1 MHzVBW 3 MHzSWT 580 msAtt 30 dB*Ref 30 dBmCenter15.5 GHzSpan29 GHz2.9 GHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -21.81 dBm 13.644000000 GHzD1 -13 dBmDate: 3.JUL.2017 14:16:42 Test Mode:
LTE band 43(20 MHz 16QAM) RB Size 100 & RB Offset 0 Test Channel:
Middle channel Report No: CCISE170705201 30MHz~1GHz 1GHz~30GHz Test Mode:
LTE band 43(20 MHz 16QAM) RB Size 100 & RB Offset 0 Test Channel:
Highest channel 30MHz~1GHz 1GHz~30GHz Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 37 of 73 A **3DBRBW 1 MHzVBW 3 MHzSWT 5 msAtt 30 dB*Ref 30 dBmOffset 10 dBLVL 1 PKMAXHStart30 MHzStop1 GHz97 MHz/-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -42.67 dBm 837.040000000 MHzD1 -13 dBmDate: 3.JUL.2017 18:33:14Offset 10 dB A LVL**3DBRBW 1 MHzVBW 3 MHzSWT 580 msAtt 30 dB*Ref 30 dBmCenter15.5 GHzSpan29 GHz2.9 GHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -22.65 dBm 13.644000000 GHzD1 -13 dBmDate: 3.JUL.2017 14:18:06 A **3DBRBW 1 MHzVBW 3 MHzSWT 5 msAtt 30 dB*Ref 30 dBmOffset 10 dBLVLStart30 MHzStop1 GHz97 MHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -43.19 dBm 868.080000000 MHzD1 -13 dBmDate: 3.JUL.2017 18:33:26Offset 10 dB A LVL**3DBRBW 1 MHzVBW 3 MHzSWT 580 msAtt 30 dB*Ref 30 dBmCenter15.5 GHzSpan29 GHz2.9 GHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -22.62 dBm 13.760000000 GHzD1 -13 dBmDate: 3.JUL.2017 14:19:18 LTE band 43 Part: 5MHz Test Mode:
LTE band 43(5 MHz QPSK) RB Size 25 & RB Offset 0 Report No: CCISE170705201 Test Channel:
Lowest channel 30MHz~1GHz Test Mode:
LTE band 43(5 MHz QPSK) RB Size 25 & RB Offset 0 1GHz~30GHz Test Channel:
Middle channel 30MHz~1GHz 1GHz~30GHz Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 38 of 73 A **3DBRBW 1 MHzVBW 3 MHzSWT 5 msAtt 30 dB*Ref 30 dBmOffset 10 dBLVLCenter515 MHzSpan970 MHz97 MHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -41.51 dBm 703.180000000 MHzD1 -13 dBmDate: 3.JUL.2017 18:27:53Offset 10 dB A LVL**3DBRBW 1 MHzVBW 3 MHzSWT 580 msAtt 30 dB*Ref 30 dBmStart1 GHzStop30 GHz2.9 GHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -22.13 dBm 13.644000000 GHzD1 -13 dBmDate: 3.JUL.2017 14:04:18 A **3DBRBW 1 MHzVBW 3 MHzSWT 5 msAtt 30 dB*Ref 30 dBmOffset 10 dBLVLCenter515 MHzSpan970 MHz97 MHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -42.40 dBm 887.480000000 MHzD1 -13 dBmDate: 3.JUL.2017 18:31:07Offset 10 dB A LVL**3DBRBW 1 MHzVBW 3 MHzSWT 580 msAtt 30 dB*Ref 30 dBmStart1 GHzStop30 GHz2.9 GHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -21.76 dBm 13.644000000 GHzD1 -13 dBmDate: 3.JUL.2017 14:05:54 Test Mode:
LTE band 43(5 MHz QPSK) RB Size 25 & RB Offset 0 Test Channel:
Highest channel Report No: CCISE170705201 30MHz~1GHz 1GHz~30GHz LTE band 43 Part: 10MHz Test Mode:
LTE band 43(10 MHz QPSK) RB Size 50 & RB Offset 0 Test Channel:
Lowest channel 30MHz~1GHz 1GHz~30GHz Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 39 of 73 A **3DBRBW 1 MHzVBW 3 MHzSWT 5 msAtt 30 dB*Ref 30 dBmOffset 10 dBLVLCenter515 MHzSpan970 MHz97 MHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -42.13 dBm 648.860000000 MHzD1 -13 dBmDate: 3.JUL.2017 18:31:22Offset 10 dB A LVL**3DBRBW 1 MHzVBW 3 MHzSWT 580 msAtt 30 dB*Ref 30 dBmStart1 GHzStop30 GHz2.9 GHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -22.05 dBm 13.644000000 GHzD1 -13 dBmDate: 3.JUL.2017 14:07:22 A **3DBRBW 1 MHzVBW 3 MHzSWT 5 msAtt 30 dB*Ref 30 dBmOffset 10 dBLVLCenter515 MHzSpan970 MHz97 MHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -41.69 dBm 745.860000000 MHzD1 -13 dBmDate: 3.JUL.2017 18:31:35Offset 10 dB A LVL**3DBRBW 1 MHzVBW 3 MHzSWT 580 msAtt 30 dB*Ref 30 dBmStart1 GHzStop30 GHz2.9 GHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -22.19 dBm 13.702000000 GHzD1 -13 dBmDate: 3.JUL.2017 14:08:47 Test Mode:
LTE band 43(10 MHz QPSK) RB Size 50 & RB Offset 0 Test Channel:
Middle channel Report No: CCISE170705201 30MHz~1GHz 1GHz~30GHz Test Mode:
LTE band 43(10 MHz QPSK) RB Size 50 & RB Offset 0 Test Channel:
Highest channel 30MHz~1GHz 1GHz~30GHz Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 40 of 73 A **3DBRBW 1 MHzVBW 3 MHzSWT 5 msAtt 30 dB*Ref 30 dBmOffset 10 dBLVLCenter515 MHzSpan970 MHz97 MHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -42.92 dBm 747.800000000 MHzD1 -13 dBmDate: 3.JUL.2017 18:31:57Offset 10 dB A LVL**3DBRBW 1 MHzVBW 3 MHzSWT 580 msAtt 30 dB*Ref 30 dBmCenter15.5 GHzSpan29 GHz2.9 GHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -22.29 dBm 13.644000000 GHzD1 -13 dBmDate: 3.JUL.2017 14:10:09 A **3DBRBW 1 MHzVBW 3 MHzSWT 5 msAtt 30 dB*Ref 30 dBmOffset 10 dBLVLCenter515 MHzSpan970 MHz97 MHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -42.42 dBm 887.480000000 MHzD1 -13 dBmDate: 3.JUL.2017 18:32:08Offset 10 dB A LVL**3DBRBW 1 MHzVBW 3 MHzSWT 580 msAtt 30 dB*Ref 30 dBmCenter15.5 GHzSpan29 GHz2.9 GHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -21.87 dBm 29.246000000 GHzD1 -13 dBmDate: 3.JUL.2017 14:11:18 LTE band 43 Part: 15MHz Test Mode:
LTE band 43(15 MHz QPSK) RB Size 75 & RB Offset 0 Test Channel:
Lowest channel Report No: CCISE170705201 30MHz~1GHz 1GHz~30GHz Test Mode:
LTE band 43(15 MHz QPSK) RB Size 75 & RB Offset 0 Test Channel:
Middle channel 30MHz~1GHz 1GHz~30GHz Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 41 of 73 A **3DBRBW 1 MHzVBW 3 MHzSWT 5 msAtt 30 dB*Ref 30 dBmOffset 10 dBLVLCenter515 MHzSpan970 MHz97 MHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -42.24 dBm 953.440000000 MHzD1 -13 dBmDate: 3.JUL.2017 18:32:23Offset 10 dB A LVL**3DBRBW 1 MHzVBW 3 MHzSWT 580 msAtt 30 dB*Ref 30 dBmCenter15.5 GHzSpan29 GHz2.9 GHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -22.40 dBm 29.304000000 GHzD1 -13 dBmDate: 3.JUL.2017 14:12:40 A **3DBRBW 1 MHzVBW 3 MHzSWT 5 msAtt 30 dB*Ref 30 dBmOffset 10 dBLVLCenter515 MHzSpan970 MHz97 MHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -42.16 dBm 464.560000000 MHzD1 -13 dBmDate: 3.JUL.2017 18:32:34Offset 10 dB A LVL**3DBRBW 1 MHzVBW 3 MHzSWT 580 msAtt 30 dB*Ref 30 dBmCenter15.5 GHzSpan29 GHz2.9 GHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -22.27 dBm 13.702000000 GHzD1 -13 dBmDate: 3.JUL.2017 14:13:50 Test Mode:
LTE band 43(15 MHz QPSK) RB Size 75 & RB Offset 0 Test Channel:
Highest channel Report No: CCISE170705201 30MHz~1GHz 1GHz~30GHz Test Mode:
LTE band 43(20 MHz QPSK) RB Size 100 & RB Offset 0 Test Channel:
Lowest channel 30MHz~1GHz 1GHz~30GHz Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 42 of 73 A **3DBRBW 1 MHzVBW 3 MHzSWT 5 msAtt 30 dB*Ref 30 dBmOffset 10 dBLVLCenter515 MHzSpan970 MHz97 MHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -42.66 dBm 613.940000000 MHzD1 -13 dBmDate: 3.JUL.2017 18:32:46Offset 10 dB A LVL**3DBRBW 1 MHzVBW 3 MHzSWT 580 msAtt 30 dB*Ref 30 dBmCenter15.5 GHzSpan29 GHz2.9 GHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -21.28 dBm 13.644000000 GHzD1 -13 dBmDate: 3.JUL.2017 14:14:53 A **3DBRBW 1 MHzVBW 3 MHzSWT 5 msAtt 30 dB*Ref 30 dBmOffset 10 dBLVLCenter515 MHzSpan970 MHz97 MHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -41.44 dBm 883.600000000 MHzD1 -13 dBmDate: 3.JUL.2017 18:32:55Offset 10 dB A LVL**3DBRBW 1 MHzVBW 3 MHzSWT 580 msAtt 30 dB*Ref 30 dBmCenter15.5 GHzSpan29 GHz2.9 GHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -21.40 dBm 29.246000000 GHzD1 -13 dBmDate: 3.JUL.2017 14:16:24 Test Mode:
LTE band 43(20 MHz QPSK) RB Size 100 & RB Offset 0 Test Channel:
Middle channel Report No: CCISE170705201 30MHz~1GHz 1GHz~30GHz Test Mode:
LTE band 43(20 MHz QPSK) RB Size 100 & RB Offset 0 Test Channel:
Highest channel 30MHz~1GHz 1GHz~30GHz Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 43 of 73 A **3DBRBW 1 MHzVBW 3 MHzSWT 5 msAtt 30 dB*Ref 30 dBmOffset 10 dBLVLCenter515 MHzSpan970 MHz97 MHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -42.06 dBm 111.480000000 MHzD1 -13 dBmDate: 3.JUL.2017 18:33:07Offset 10 dB A LVL**3DBRBW 1 MHzVBW 3 MHzSWT 580 msAtt 30 dB*Ref 30 dBmCenter15.5 GHzSpan29 GHz2.9 GHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -22.08 dBm 13.702000000 GHzD1 -13 dBmDate: 3.JUL.2017 14:17:54 A **3DBRBW 1 MHzVBW 3 MHzSWT 5 msAtt 30 dB*Ref 30 dBmOffset 10 dBLVLStart30 MHzStop1 GHz97 MHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -41.78 dBm 390.840000000 MHzD1 -13 dBmDate: 3.JUL.2017 18:33:22Offset 10 dB A LVL**3DBRBW 1 MHzVBW 3 MHzSWT 580 msAtt 30 dB*Ref 30 dBmCenter15.5 GHzSpan29 GHz2.9 GHz/ 1 PKMAXH-70-60-50-40-30-20-1001020301Marker 1 [T1 ] -21.86 dBm 13.586000000 GHzD1 -13 dBmDate: 3.JUL.2017 14:19:10 Band edge emission:
Report No: CCISE170705201 QPSK 16QAM 5MHz Lowest channel Lowest channel Highest channel Highest channel Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 44 of 73 Report No: CCISE170705201 QPSK 16QAM 10MHz Lowest channel Lowest channel Highest channel Highest channel Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 45 of 73 QPSK 16QAM 15MHz Report No: CCISE170705201 Lowest channel Lowest channel Highest channel Highest channel Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 46 of 73 Report No: CCISE170705201 QPSK 16QAM 20MHz Lowest channel Lowest channel Highest channel Highest channel Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 47 of 73 Report No: CCISE170705201 6.9 Field strength of spurious radiation measurement Test Requirement:
Part 90.1323 Test Method:
Limit:
Test setup:
FCC part2.1053 and KDB 971168 D01
-13dBm Below 1GHz Above 1GHz Substituted method:
Test Procedure:
1. The EUT was placed on an non-conductive turntable using a non-
conductive support. The radiated emission at the fundamental frequency was measured at 3 m with a test antenna and EMI spectrum analyzer. 2. During the tests, the antenna height and the EUT azimuth were varied in order to identify the maximum level of emissions from the EUT. This maximization process was repeated with the EUT positioned in each of its three orthogonal orientations. 3. The frequency range up to tenth harmonic was investigated for each Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 48 of 73 Report No: CCISE170705201 of three fundamental frequency (low, middle and high channels). Once spurious emission was identified, the power of the emission was determined using the substitution method. 4. The spurious emissions attenuation was calculated as the difference between radiated power at the fundamental frequency and the spurious emissions frequency. ERP / EIRP = S.G. output (dBm) + Antenna Gain(dB/dBi) Cable Loss (dB) Test Uncertainty:
4.88 dB Test Instruments:
Refer to section 5.8 for details Test mode:
Test results:
Remark:
Refer to section 5.3 for details. Passed During the test, pre-scan the QPSK, 16QAM modulation, and found the QPSK modulation is the worst case. Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 49 of 73 Measurement Data (worst case):
5MHz for QPSK Frequency (MHz) Spurious Emission Polarization Level (dBm) Limit (dBm) Result Report No: CCISE170705201 7305.00 10957.50 7305.00 10957.50 7350.00 11025.00 7350.00 11025.00 7395.00 11070.00 7395.00 11070.00 Vertical V Horizontal H Vertical V Horizontal H Vertical V Horizontal H Lowest
-35.05
-29.16
-33.34
-32.21 Middle
-32.94
-37.33
-37.75
-36.35 Highest
-33.77
-35.61
-34.88
-33.76
-13 Pass
-13 Pass
-13 Pass Remark:
1. The emission levels of below 1 GHz are very lower than the limit and not show in test report. 10MHz for QPSK Frequency (MHz) Spurious Emission Polarization Level (dBm) Limit (dBm) Result 7310.00 10985.00 7310.00 10985.00 7350.00 11025.00 7350.00 11025.00 7390.00 11065.00 7390.00 11065.00 Vertical V Horizontal H Vertical V Horizontal H Vertical V Horizontal H Lowest
-35.52
-29.31
-33.35
-32.03 Middle
-32.51
-37.35
-37.52
-36.54 Highest
-33.11
-35.03
-34.26
-33.89
-13 Pass
-13 Pass
-13 Pass Remark:
1. The emission levels of below 1 GHz are very lower than the limit and not show in test report. Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 50 of 73 Frequency (MHz) Spurious Emission Polarization Level (dBm) Limit (dBm) Result 15MHz for QPSK Report No: CCISE170705201 7315.00 10990.00 7315.00 10990.00 7350.00 11025.00 7350.00 11025.00 7385.00 11060.00 7385.00 11060.00 Vertical V Horizontal H Vertical V Horizontal H Vertical V Horizontal H Lowest
-35.79
-29.93
-33.84
-32.77 Middle
-32.89
-37.88
-37.92
-36.77 Highest
-33.52
-35.42
-34.26
-33.88
-13 Pass
-13 Pass
-13 Pass Remark:
1. The emission levels of below 1 GHz are very lower than the limit and not show in test report. 20MHz for QPSK Frequency (MHz) Spurious Emission Polarization Level (dBm) Limit (dBm) Result 7320.00 10995.00 7320.00 10995.00 7350.00 11025.00 7350.00 11025.00 7380.00 11055.00 7380.00 11055.00 Vertical V Horizontal H Vertical V Horizontal H Vertical V Horizontal H Lowest
-35.42
-29.76
-33.20
-32.76 Middle
-32.03
-37.21
-37.42
-36.88 Highest
-33.42
-35.51
-34.08
-33.31
-13 Pass
-13 Pass
-13 Pass Remark:
1. The emission levels of below 1 GHz are very lower than the limit and not show in test report. Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 51 of 73 6.10 Frequency stability V.S. Temperature measurement Test Requirement:
FCC Part90.213(a) Test Method:
FCC Part2.1055(a)(1)(b) and KDB 971168 D01 FCC:
Report No: CCISE170705201 Limit:
Test setup:
Test procedure:
1. The equipment under test was connected to an external DC power supply and input rated voltage. 2. RF output was connected to a frequency counter or spectrum analyzer via feed through attenuators. 3. The EUT was placed inside the temperature chamber. 4. Set the spectrum analyzer RBW low enough to obtain the desired frequency resolution and measure EUT 25 operating frequency as reference frequency. 5. Turn EUT off and set the chamber temperature to 30. After the temperature stabilized for approximately 30 minutes recorded the frequency. 6. Repeat step measure with 10 increased per stage until the highest temperature of +50 reached Test Instruments:
Refer to section 5.8 for details Test mode:
Test results:
Remark:
Refer to section 5.3 for details Passed All three channels of all modulations have been tested, but only the worst channel and the worst modulation show in this test item. Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 52 of 73 Measurement Data (the worst channel):
Band43 Report No: CCISE170705201 Reference Frequency: Lowest channel=3652.5MHz(5MHz for QPSK) Power supplied (Vdc) Temperature () 24.00
-40
-25
-10 0 10 20 30 40 55 Frequency error ppm 0.052567 0.049555 0.047639 0.045175 0.036140 0.036413 0.041068 0.040520 0.027926 Hz 192 181 174 165 132 133 150 148 102 Reference Frequency: Lowest channel=3655.0MHz(10MHz for QPSK) Power supplied (Vdc) Temperature ()
-40
-20
-10 0 10 20 30 40 55 24.00 Frequency error ppm 0.051163 0.048153 0.049248 0.039398 0.041040 0.036115 0.034473 0.032832 0.030917 Hz 187 176 180 144 150 132 126 120 113 Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 53 of 73 Reference Frequency: Lowest channel=3657.5MHz(15MHz for QPSK) Report No: CCISE170705201 Power supplied (Vdc) Temperature () 24.00
-40
-25
-10 0 10 20 30 40 55 Frequency error ppm 0.054409 0.051401 0.048120 0.044566 0.036364 0.041012 0.040465 0.029528 0.032536 Hz 199 188 176 163 133 150 148 108 119 Reference Frequency: Lowest channel=3660.0MHz(20MHz for QPSK) Power supplied (Vdc) Temperature ()
-40
-20
-10 0 10 20 30 40 55 24.00 Frequency error ppm 0.051093 0.045082 0.047541 0.033607 0.043716 0.039344 0.040984 0.029508 0.036339 Hz 187 165 174 123 160 144 150 108 133 Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 54 of 73 Reference Frequency: Lowest channel=3652.5MHz(5MHz for 16QAM) Report No: CCISE170705201 Power supplied (Vdc) Temperature () 24.00
-40
-25
-10 0 10 20 30 40 55 Frequency error ppm 0.053662 0.041342 0.049281 0.046817 0.038604 0.036140 0.042437 0.043258 0.029569 Hz 196 151 180 171 141 132 155 158 108 Reference Frequency: Lowest channel=3655.0MHz(10MHz for 16QAM) Power supplied (Vdc) Temperature ()
-40
-20
-10 0 10 20 30 40 55 24.00 Frequency error ppm 0.054446 0.049521 0.045144 0.046785 0.033653 0.036115 0.037209 0.035021 0.039398 Hz 199 181 165 171 123 132 136 128 144 Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 55 of 73 Reference Frequency: Lowest channel=3657.5MHz(15MHz for 16QAM) Report No: CCISE170705201 Power supplied (Vdc) Temperature () 24.00
-40
-25
-10 0 10 20 30 40 55 Frequency error ppm 0.053589 0.050581 0.039371 0.046753 0.036090 0.037184 0.034176 0.028708 0.032262 Hz 196 185 144 171 132 136 125 105 118 Reference Frequency: Lowest channel=3660.0MHz(20MHz for 16QAM) Power supplied (Vdc) Temperature ()
-40
-20
-10 0 10 20 30 40 55 24.00 Frequency error ppm 0.054098 0.049180 0.042623 0.036066 0.039344 0.046721 0.028689 0.031694 0.034973 Hz 198 180 156 132 144 171 105 116 128 Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 56 of 73 6.11 Frequency stability V.S. Voltage measurement Test Requirement:
FCC Part 90.213(a) Test Method:
FCC Part 2.1055(a)(1)(b) and KDB 971168 D01 FCC:
Report No: CCISE170705201 Limit:
Test setup:
Test procedure:
1. Set chamber temperature to 25. Use a variable DC power source to power the EUT and set the voltage to rated voltage. 2. Set the spectrum analyzer RBW low enough to obtain the desired frequency resolution and recorded the frequency. 3. Reduce the input voltage to specify extreme voltage variation (+/-
15%) and endpoint, record the maximum frequency change. Test Instruments:
Refer to section 5.8 for details Test mode:
Test results:
Remark:
Refer to section 5.3 for details, and all channels have been tested, only shows the worst channel data in this report. Passed All three channels of all modulations have been tested, but only the worst channel and the worst modulation show in this test item. Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 57 of 73 Measurement Data (the worst channel):
Band43 Report No: CCISE170705201 Reference Frequency: Lowest channel=3652.5MHz(5MHz for QPSK) Temperature () Power supplied (Vdc) 25 20 24 28 Frequency error ppm 0.027105 0.021903 0.018344 Hz 99 80 67 Reference Frequency: Lowest channel=3655.0MHz(10MHz for QPSK) Temperature () Power supplied (Vdc) 25 20 24 28 Frequency error ppm 0.024350 0.021341 0.024624 Hz 89 78 90 Reference Frequency: Lowest channel=3657.5MHz(15MHz for QPSK) Temperature () Power supplied (Vdc) 25 20 24 28 Frequency error ppm 0.023787 0.026247 0.015858 Hz 87 96 58 Reference Frequency: Lowest channel=3660.0MHz(20MHz for QPSK) Temperature () Power supplied (Vdc) 20 24 28 25 Frequency error ppm 0.027049 0.019399 0.021858 Hz 99 71 80 Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 58 of 73 Report No: CCISE170705201 Reference Frequency: Lowest channel=3652.5MHz(5MHz for 16QAM) Temperature () Power supplied (Vdc) 25 20 24 28 Hz 95 88 64 Frequency error ppm 0.026010 0.024093 0.017522 Reference Frequency: Lowest channel=3655.0MHz(10MHz for 16QAM) Temperature () Power supplied (Vdc) 25 20 24 28 Hz 84 96 73 Frequency error ppm 0.022982 0.026265 0.019973 Reference Frequency: Lowest channel=3657.5MHz(15MHz for 16QAM) Temperature () Power supplied (Vdc) 25 20 24 28 Frequency error ppm 0.021326 0.024607 0.013124 Hz 78 90 48 Reference Frequency: Lowest channel=3660.0MHz(20MHz for 16QAM) Temperature () Power supplied (Vdc) 25 20 24 28 Frequency error ppm 0.026776 0.023224 0.016393 Hz 98 85 60 Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: CCISE1707052 Page 59 of 73
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2017-10-13 | 3660 ~ 3690 | TNB - Licensed Non-Broadcast Station Transmitter | Original Equipment |
| 2 | 2412 ~ 2462 | DTS - Digital Transmission System |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 2 | Effective |
2017-10-13
|
||||
| 1 2 | Applicant's complete, legal business name |
Baicells Technologies Co., Ltd.
|
||||
| 1 2 | FCC Registration Number (FRN) |
0025156423
|
||||
| 1 2 | Physical Address |
3F, Hui Yuan Development Building, No.1 Shangdi Information Industry Base, Haidian Dist.
|
||||
| 1 2 |
3F, Hui Yuan Development Building, No.1 Shangdi
|
|||||
| 1 2 |
Beijing, N/A
|
|||||
| 1 2 |
China
|
|||||
| app s | TCB Information | |||||
| 1 2 | TCB Application Email Address |
S******@nemko.com
|
||||
| 1 2 | TCB Scope |
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
||||
| 1 2 |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
| app s | FCC ID | |||||
| 1 2 | Grantee Code |
2AG32
|
||||
| 1 2 | Equipment Product Code |
EG7035LM2
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 2 | Name |
B****** H********
|
||||
| 1 2 | Telephone Number |
+86-0********
|
||||
| 1 2 | Fax Number |
+86-0********
|
||||
| 1 2 |
h******@baicells.com
|
|||||
| app s | Technical Contact | |||||
| n/a | ||||||
| app s | Non Technical Contact | |||||
| n/a | ||||||
| app s | Confidentiality (long or short term) | |||||
| 1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 2 | Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter | ||||
| 1 2 | DTS - Digital Transmission System | |||||
| 1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | LTE Outdoor CPE | ||||
| 1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes | ||||
| 1 2 | No | |||||
| 1 2 | Modular Equipment Type | Does not apply | ||||
| 1 2 | Purpose / Application is for | Original Equipment | ||||
| 1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
| 1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 2 | Grant Comments | Output power listed is EIRP. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna colocation requirements of §1.1307(b) (3). | ||||
| 1 2 | Power listed is conducted. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. | |||||
| 1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 2 | Firm Name |
Shenzhen Zhongjian Nanfang Testing Co.,Ltd
|
||||
| 1 2 |
Shenzhen Zhongjian Nanfang Testing Co., Ltd.
|
|||||
| 1 2 | Name |
B**** Z******
|
||||
| 1 2 | Telephone Number |
86-75********
|
||||
| 1 2 |
+86 (********
|
|||||
| 1 2 | Fax Number |
86-75********
|
||||
| 1 2 |
b******@ccis-cb.com
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 9 | UR | 3652.5 | 3697.5 | 3.2211 | 0.053662 ppm | 4M52W7D | |||||||||||||||||||||||||||||||||
| 1 | 2 | 9 | UR | 3652.5 | 3697.5 | 3.3189 | 0.052567 ppm | 4M51G7D | |||||||||||||||||||||||||||||||||
| 1 | 3 | 9 | UR | 3660 | 3690 | 2.8445 | 0.054098 ppm | 17M9W7D | |||||||||||||||||||||||||||||||||
| 1 | 4 | 9 | UR | 3660 | 3690 | 3.02 | 0.051093 ppm | 17M9G7D | |||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 2 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.0153000 | ||||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC